/[pcre]/code/branches/pcre16/ChangeLog

Diff of /code/branches/pcre16/ChangeLog

Parent Directory | Revision Log | View Patch Patch

-revision 219 by ph10,
Thu Aug 16 11:46:40 2007 UTC
+revision 314 by ph10,
Fri Jan 25 17:09:21 2008 UTC
 Line 1
  ChangeLog for PCRE
  ------------------
- Version 7.3 09-Aug-07
+ Version 7.6 21-Jan-08
+ ---------------------
+.  A character class containing a very large number of characters with
+     codepoints greater than 255 (in UTF-8 mode, of course) caused a buffer
+     overflow.
+.  Patch to cut out the "long long" test in pcrecpp_unittest when
+     HAVE_LONG_LONG is not defined.
+.  Applied Christian Ehrlicher's patch to update the CMake build files to
+     bring them up to date and include new features. This patch includes:
+     - Fixed PH's badly added libz and libbz2 support.
+     - Fixed a problem with static linking.
+     - Added pcredemo. [But later removed - see 7 below.]
+     - Fixed dftables problem and added an option.
+     - Added a number of HAVE_XXX tests, including HAVE_WINDOWS_H and
+         HAVE_LONG_LONG.
+     - Added readline support for pcretest.
+     - Added an listing of the option settings after cmake has run.
+.  A user submitted a patch to Makefile that makes it easy to create
+     "pcre.dll" under mingw when using Configure/Make. I added stuff to
+     Makefile.am that cause it to include this special target, without
+     affecting anything else. Note that the same mingw target plus all
+     the other distribution libraries and programs are now supported
+     when configuring with CMake (see 6 below) instead of with
+     Configure/Make.
+.  Applied Craig's patch that moves no_arg into the RE class in the C++ code.
+     This is an attempt to solve the reported problem "pcrecpp::no_arg is not
+     exported in the Windows port". It has not yet been confirmed that the patch
+     solves the problem, but it does no harm.
+.  Applied Sheri's patch to CMakeLists.txt to add NON_STANDARD_LIB_PREFIX and
+     NON_STANDARD_LIB_SUFFIX for dll names built with mingw when configured
+     with CMake, and also correct the comment about stack recursion.
+.  Remove the automatic building of pcredemo from the ./configure system and
+     from CMakeLists.txt. The whole idea of pcredemo.c is that it is an example
+     of a program that users should build themselves after PCRE is installed, so
+     building it automatically is not really right. What is more, it gave
+     trouble in some build environments.
+ Version 7.5 10-Jan-08
+ ---------------------
+.  Applied a patch from Craig: "This patch makes it possible to 'ignore'
+     values in parens when parsing an RE using the C++ wrapper."
+.  Negative specials like \S did not work in character classes in UTF-8 mode.
+     Characters greater than 255 were excluded from the class instead of being
+     included.
+.  The same bug as (2) above applied to negated POSIX classes such as
+     [:^space:].
+.  PCRECPP_STATIC was referenced in pcrecpp_internal.h, but nowhere was it
+     defined or documented. It seems to have been a typo for PCRE_STATIC, so
+     I have changed it.
+.  The construct (?&) was not diagnosed as a syntax error (it referenced the
+     first named subpattern) and a construct such as (?&a) would reference the
+     first named subpattern whose name started with "a" (in other words, the
+     length check was missing). Both these problems are fixed. "Subpattern name
+     expected" is now given for (?&) (a zero-length name), and this patch also
+     makes it give the same error for \k'' (previously it complained that that
+     was a reference to a non-existent subpattern).
+.  The erroneous patterns (?+-a) and (?-+a) give different error messages;
+     this is right because (?- can be followed by option settings as well as by
+     digits. I have, however, made the messages clearer.
+.  Patterns such as (?(1)a|b) (a pattern that contains fewer subpatterns
+     than the number used in the conditional) now cause a compile-time error.
+     This is actually not compatible with Perl, which accepts such patterns, but
+     treats the conditional as always being FALSE (as PCRE used to), but it
+     seems to me that giving a diagnostic is better.
+.  Change "alphameric" to the more common word "alphanumeric" in comments
+     and messages.
+.  Fix two occurrences of "backslash" in comments that should have been
+     "backspace".
+. Remove two redundant lines of code that can never be obeyed (their function
+     was moved elsewhere).
+. The program that makes PCRE's Unicode character property table had a bug
+     which caused it to generate incorrect table entries for sequences of
+     characters that have the same character type, but are in different scripts.
+     It amalgamated them into a single range, with the script of the first of
+     them. In other words, some characters were in the wrong script. There were
+     thirteen such cases, affecting characters in the following ranges:
+       U+002b0 - U+002c1
+       U+0060c - U+0060d
+       U+0061e - U+00612
+       U+0064b - U+0065e
+       U+0074d - U+0076d
+       U+01800 - U+01805
+       U+01d00 - U+01d77
+       U+01d9b - U+01dbf
+       U+0200b - U+0200f
+       U+030fc - U+030fe
+       U+03260 - U+0327f
+       U+0fb46 - U+0fbb1
+       U+10450 - U+1049d
+. The -o option (show only the matching part of a line) for pcregrep was not
+     compatible with GNU grep in that, if there was more than one match in a
+     line, it showed only the first of them. It now behaves in the same way as
+     GNU grep.
+. If the -o and -v options were combined for pcregrep, it printed a blank
+     line for every non-matching line. GNU grep prints nothing, and pcregrep now
+     does the same. The return code can be used to tell if there were any
+     non-matching lines.
+. Added --file-offsets and --line-offsets to pcregrep.
+. The pattern (?=something)(?R) was not being diagnosed as a potentially
+     infinitely looping recursion. The bug was that positive lookaheads were not
+     being skipped when checking for a possible empty match (negative lookaheads
+     and both kinds of lookbehind were skipped).
+. Fixed two typos in the Windows-only code in pcregrep.c, and moved the
+     inclusion of <windows.h> to before rather than after the definition of
+     INVALID_FILE_ATTRIBUTES (patch from David Byron).
+. Specifying a possessive quantifier with a specific limit for a Unicode
+     character property caused pcre_compile() to compile bad code, which led at
+     runtime to PCRE_ERROR_INTERNAL (-14). Examples of patterns that caused this
+     are: /\p{Zl}{2,3}+/8 and /\p{Cc}{2}+/8. It was the possessive "+" that
+     caused the error; without that there was no problem.
+. Added --enable-pcregrep-libz and --enable-pcregrep-libbz2.
+. Added --enable-pcretest-libreadline.
+. In pcrecpp.cc, the variable 'count' was incremented twice in
+     RE::GlobalReplace(). As a result, the number of replacements returned was
+     double what it should be. I removed one of the increments, but Craig sent a
+     later patch that removed the other one (the right fix) and added unit tests
+     that check the return values (which was not done before).
+. Several CMake things:
+     (1) Arranged that, when cmake is used on Unix, the libraries end up with
+         the names libpcre and libpcreposix, not just pcre and pcreposix.
+     (2) The above change means that pcretest and pcregrep are now correctly
+         linked with the newly-built libraries, not previously installed ones.
+     (3) Added PCRE_SUPPORT_LIBREADLINE, PCRE_SUPPORT_LIBZ, PCRE_SUPPORT_LIBBZ2.
+. In UTF-8 mode, with newline set to "any", a pattern such as .*a.*=.b.*
+     crashed when matching a string such as a\x{2029}b (note that \x{2029} is a
+     UTF-8 newline character). The key issue is that the pattern starts .*;
+     this means that the match must be either at the beginning, or after a
+     newline. The bug was in the code for advancing after a failed match and
+     checking that the new position followed a newline. It was not taking
+     account of UTF-8 characters correctly.
+. PCRE was behaving differently from Perl in the way it recognized POSIX
+     character classes. PCRE was not treating the sequence [:...:] as a
+     character class unless the ... were all letters. Perl, however, seems to
+     allow any characters between [: and :], though of course it rejects as
+     unknown any "names" that contain non-letters, because all the known class
+     names consist only of letters. Thus, Perl gives an error for [[:1234:]],
+     for example, whereas PCRE did not - it did not recognize a POSIX character
+     class. This seemed a bit dangerous, so the code has been changed to be
+     closer to Perl. The behaviour is not identical to Perl, because PCRE will
+     diagnose an unknown class for, for example, [[:l\ower:]] where Perl will
+     treat it as [[:lower:]]. However, PCRE does now give "unknown" errors where
+     Perl does, and where it didn't before.
+. Rewrite so as to remove the single use of %n from pcregrep because in some
+     Windows environments %n is disabled by default.
+ Version 7.4 21-Sep-07
+ ---------------------
+.  Change 7.3/28 was implemented for classes by looking at the bitmap. This
+     means that a class such as [\s] counted as "explicit reference to CR or
+     LF". That isn't really right - the whole point of the change was to try to
+     help when there was an actual mention of one of the two characters. So now
+     the change happens only if \r or \n (or a literal CR or LF) character is
+     encountered.
+.  The 32-bit options word was also used for 6 internal flags, but the numbers
+     of both had grown to the point where there were only 3 bits left.
+     Fortunately, there was spare space in the data structure, and so I have
+     moved the internal flags into a new 16-bit field to free up more option
+     bits.
+.  The appearance of (?J) at the start of a pattern set the DUPNAMES option,
+     but did not set the internal JCHANGED flag - either of these is enough to
+     control the way the "get" function works - but the PCRE_INFO_JCHANGED
+     facility is supposed to tell if (?J) was ever used, so now (?J) at the
+     start sets both bits.
+.  Added options (at build time, compile time, exec time) to change \R from
+     matching any Unicode line ending sequence to just matching CR, LF, or CRLF.
+.  doc/pcresyntax.html was missing from the distribution.
+.  Put back the definition of PCRE_ERROR_NULLWSLIMIT, for backward
+     compatibility, even though it is no longer used.
+.  Added macro for snprintf to pcrecpp_unittest.cc and also for strtoll and
+     strtoull to pcrecpp.cc to select the available functions in WIN32 when the
+     windows.h file is present (where different names are used). [This was
+     reversed later after testing - see 16 below.]
+.  Changed all #include <config.h> to #include "config.h". There were also
+     some further <pcre.h> cases that I changed to "pcre.h".
+.  When pcregrep was used with the --colour option, it missed the line ending
+     sequence off the lines that it output.
+. It was pointed out to me that arrays of string pointers cause lots of
+     relocations when a shared library is dynamically loaded. A technique of
+     using a single long string with a table of offsets can drastically reduce
+     these. I have refactored PCRE in four places to do this. The result is
+     dramatic:
+       Originally:                          290
+       After changing UCP table:            187
+       After changing error message table:   43
+       After changing table of "verbs"       36
+       After changing table of Posix names   22
+     Thanks to the folks working on Gregex for glib for this insight.
+. --disable-stack-for-recursion caused compiling to fail unless -enable-
+     unicode-properties was also set.
+. Updated the tests so that they work when \R is defaulted to ANYCRLF.
+. Added checks for ANY and ANYCRLF to pcrecpp.cc where it previously
+     checked only for CRLF.
+. Added casts to pcretest.c to avoid compiler warnings.
+. Added Craig's patch to various pcrecpp modules to avoid compiler warnings.
+. Added Craig's patch to remove the WINDOWS_H tests, that were not working,
+     and instead check for _strtoi64 explicitly, and avoid the use of snprintf()
+     entirely. This removes changes made in 7 above.
+. The CMake files have been updated, and there is now more information about
+     building with CMake in the NON-UNIX-USE document.
+ Version 7.3 28-Aug-07
  ---------------------
 . In the rejigging of the build system that eventually resulted in 7.1, the
-Line 98 
 Version 7.3 09-Aug-07
+Line 356 
 Version 7.3 09-Aug-07
      the "low surrogate" sequence 0xD800 to 0xDFFF. Previously, PCRE allowed the
      full range 0 to 0x7FFFFFFF, as defined by RFC 2279. Internally, it still
      does: it's just the validity check that is more restrictive.
 . Inserted checks for integer overflows during escape sequence (backslash)
      processing, and also fixed erroneous offset values for syntax errors during
      backslash processing.
 . Fixed another case of looking too far back in non-UTF-8 mode (cf 12 above)
      for patterns like [\PPP\x8a]{1,}\x80 with the subject "A\x80".
 . An unterminated class in a pattern like (?1)\c[ with a "forward reference"
      caused an overrun.
 . A pattern like (?:[\PPa*]*){8,} which had an "extended class" (one with
      something other than just ASCII characters) inside a group that had an
      unlimited repeat caused a loop at compile time (while checking to see
      whether the group could match an empty string).
 . Debugging a pattern containing \p or \P could cause a crash. For example,
      [\P{Any}] did so. (Error in the code for printing property names.)
-. An orphan \E inside a character class could cause a crash.
-. A repeated capturing bracket such as (A)? could cause a wild memory
+. An orphan \E inside a character class could cause a crash.
+. A repeated capturing bracket such as (A)? could cause a wild memory
      reference during compilation.
 . There are several functions in pcre_compile() that scan along a compiled
      expression for various reasons (e.g. to see if it's fixed length for look
      behind). There were bugs in these functions when a repeated \p or \P was
      present in the pattern. These operators have additional parameters compared
      with \d, etc, and these were not being taken into account when moving along
      the compiled data. Specifically:
      (a) A item such as \p{Yi}{3} in a lookbehind was not treated as fixed
          length.
      (b) An item such as \pL+ within a repeated group could cause crashes or
          loops.
      (c) A pattern such as \p{Yi}+(\P{Yi}+)(?1) could give an incorrect
          "reference to non-existent subpattern" error.
+     (d) A pattern like (\P{Yi}{2}\277)? could loop at compile time.
 . A repeated \S or \W in UTF-8 mode could give wrong answers when multibyte
      characters were involved (for example /\S{2}/8g with "A\x{a3}BC").
+. Using pcregrep in multiline, inverted mode (-Mv) caused it to loop.
+. Patterns such as [\P{Yi}A] which include \p or \P and just one other
+     character were causing crashes (broken optimization).
+. Patterns such as (\P{Yi}*\277)* (group with possible zero repeat containing
+     \p or \P) caused a compile-time loop.
+. More problems have arisen in unanchored patterns when CRLF is a valid line
+     break. For example, the unstudied pattern [\r\n]A does not match the string
+     "\r\nA" because change 7.0/46 below moves the current point on by two
+     characters after failing to match at the start. However, the pattern \nA
+     *does* match, because it doesn't start till \n, and if [\r\n]A is studied,
+     the same is true. There doesn't seem any very clean way out of this, but
+     what I have chosen to do makes the common cases work: PCRE now takes note
+     of whether there can be an explicit match for \r or \n anywhere in the
+     pattern, and if so, 7.0/46 no longer applies. As part of this change,
+     there's a new PCRE_INFO_HASCRORLF option for finding out whether a compiled
+     pattern has explicit CR or LF references.
+. Added (*CR) etc for changing newline setting at start of pattern.
  Version 7.2 19-Jun-07

 Legend:



Removed from v.219
 


changed lines


 
Added in v.314
 Legend:



Removed from v.219
 


changed lines


 
Added in v.314
-Removed from v.219
+Added in v.314

	ViewVC Help
Powered by ViewVC 1.1.5