branches/pcre16/RunTest.bat

@echo off
@rem This file must use CRLF linebreaks to function properly
@rem and requires both pcretest and pcregrep
@rem  This file was originally contributed by Ralf Junker, and touched up by
@rem  Daniel Richard G. Tests 10-12 added by Philip H.
@rem  Philip H also changed test 3 to use "wintest" files.
@rem
@rem  Updated by Tom Fortmann to support explicit test numbers on the command line.
@rem  Added argument validation and added error reporting.
@rem
@rem  MS Windows batch file to run pcretest on testfiles with the correct
@rem  options.
@rem
@rem Sheri Pierce added logic to skip feature dependent tests
@rem tests 4 5 8 and 12 require utf8 support
@rem tests 6 9 13 require ucp support
@rem 10 requires ucp and link size 2
@rem 14 requires presense of jit support
@rem 15 requires absence of jit support
@rem Sheri P also added override tests for study and jit testing
@rem JIT testing n/a for tests 7-10, removed JIT override test for them
@rem removed override tests for 14-15

setlocal enabledelayedexpansion
if [%srcdir%]==[] (
if exist testdata\ set srcdir=.)
if [%srcdir%]==[] (
if exist ..\testdata\ set srcdir=..)
if [%srcdir%]==[] (
if exist ..\..\testdata\ set srcdir=..\..)
if NOT exist "%srcdir%\testdata\" (
Error: echo distribution testdata folder not found!
call :conferror
exit /b 1
goto :eof
)

if "%pcregrep%"=="" set pcregrep=.\pcregrep.exe
if "%pcretest%"=="" set pcretest=.\pcretest.exe

echo source dir is %srcdir%
echo pcretest=%pcretest%
echo pcregrep=%pcregrep%

if NOT exist "%pcregrep%" (
echo Error: "%pcregrep%" not found!
echo.
call :conferror
exit /b 1
)

if NOT exist "%pcretest%" (
echo Error: "%pcretest%" not found!
echo.
call :conferror
exit /b 1
)

"%pcretest%" -C|"%pcregrep%" --no-jit "No UTF-8 support">NUL
set utf8=%ERRORLEVEL%
"%pcretest%" -C|"%pcregrep%" --no-jit "No Unicode properties support">NUL
set ucp=%ERRORLEVEL%
"%pcretest%" -C|"%pcregrep%" --no-jit "No just-in-time compiler support">NUL
set jit=%ERRORLEVEL%
"%pcretest%" -C|"%pcregrep%" --no-jit "Internal link size = 2">NUL
set link2=%ERRORLEVEL%
set ucpandlink2=0
if %ucp% EQU 1 (
 if %link2% EQU 0 set ucpandlink2=1
)

if not exist testout md testout
if not exist testoutstudy md testoutstudy
if not exist testoutjit md testoutjit

set do1=no
set do2=no
set do3=no
set do4=no
set do5=no
set do6=no
set do7=no
set do8=no
set do9=no
set do10=no
set do11=no
set do12=no
set do13=no
set do14=no
set do15=no
set all=yes

for %%a in (%*) do (
  set valid=no
  for %%v in (1 2 3 4 5 6 7 8 9 10 11 12 13 14 15) do if %%v == %%a set valid=yes
  if "!valid!" == "yes" (
    set do%%a=yes
    set all=no
) else (
    echo Invalid test number - %%a!
        echo Usage %0 [ test_number ] ...
        echo Where test_number is one or more optional test numbers 1 through 15, default is all tests.
        exit /b 1
)
)
set failed="no"

if "%all%" == "yes" (
  set do1=yes
  set do2=yes
  set do3=yes
  set do4=yes
  set do5=yes
  set do6=yes
  set do7=yes
  set do8=yes
  set do9=yes
  set do10=yes
  set do11=yes
  set do12=yes
  set do13=yes
  set do14=yes
  set do15=yes
)

@echo RunTest.bat's pcretest output is written to newly created subfolders named
@echo testout, testoutstudy and testoutjit.
@echo.
if "%do1%" == "yes" call :do1
if "%do2%" == "yes" call :do2
if "%do3%" == "yes" call :do3
if "%do4%" == "yes" call :do4
if "%do5%" == "yes" call :do5
if "%do6%" == "yes" call :do6
if "%do7%" == "yes" call :do7
if "%do8%" == "yes" call :do8
if "%do9%" == "yes" call :do9
if "%do10%" == "yes" call :do10
if "%do11%" == "yes" call :do11
if "%do12%" == "yes" call :do12
if "%do13%" == "yes" call :do13
if "%do14%" == "yes" call :do14
if "%do15%" == "yes" call :do15
if %failed% == "yes" (
echo In above output, one or more of the various tests failed!
exit /b 1
)
echo All OK
goto :eof

:runsub
@rem Function to execute pcretest and compare the output
@rem Arguments are as follows:
@rem
@rem       1 = test number
@rem       2 = outputdir
@rem       3 = test name use double quotes
@rem   4 - 9 = pcretest options

if [%1] == [] (
  echo Missing test number argument!
  exit /b 1
)

if [%2] == [] (
  echo Missing outputdir!
  exit /b 1
)

if [%3] == [] (
  echo Missing test name argument!
  exit /b 1
)

set testinput=testinput%1
set testoutput=testoutput%1
if exist %srcdir%\testdata\win%testinput% (
  set testinput=wintestinput%1
  set testoutput=wintestoutput%1
)

echo Test %1: %3
"%pcretest%" %4 %5 %6 %7 %8 %9 "%srcdir%\testdata\%testinput%">%2\%testoutput%
if errorlevel 1 (
  echo.          failed executing command-line:
  echo.            "%pcretest%" %4 %5 %6 %7 %8 %9 "%srcdir%\testdata\%testinput%"^>%2\%testoutput%
  set failed="yes"
  goto :eof
)

fc /n "%srcdir%\testdata\%testoutput%" "%2\%testoutput%">NUL
if errorlevel 1 (
  echo.          failed comparison: fc /n "%srcdir%\testdata\%testoutput%" "%2\%testoutput%"
  set failed="yes"
  if [%1]==[2] (
    echo.
    echo ** Test 2 requires a lot of stack. PCRE can be configured to
    echo ** use heap for recursion. Otherwise, to pass Test 2
    echo ** you generally need to allocate 8 mb stack to PCRE.
    echo ** See the 'pcrestack' page for a discussion of PCRE's
    echo ** stack usage.
    echo.
)
  if [%1]==[3] (
    echo.
    echo ** Test 3 failure usually means french locale is not
    echo ** available on the system, rather than a bug or problem with PCRE.
    echo.
)

  goto :eof
)

echo.          Passed.
goto :eof

:do1
call :runsub 1 testout "Main functionality - Compatible with Perl 5.8 and above" -q
call :runsub 1 testoutstudy "Test with Study Override" -q -s
if %jit% EQU 1 call :runsub 1 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do2
  call :runsub 2 testout "API, errors, internals, and non-Perl stuff (not UTF-8)" -q
  call :runsub 2 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 2 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do3
  call :runsub 3 testout "Locale-specific features" -q
  call :runsub 3 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 3 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do4
  if %utf8% EQU 0 (
  echo Test 4 Skipped due to absence of UTF-8 support.
  goto :eof
)
  call :runsub 4 testout "UTF-8 support - Compatible with Perl 5.8 and above" -q
  call :runsub 4 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 4 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do5
  if %utf8% EQU 0 (
  echo Test 5 Skipped due to absence of UTF-8 support.
  goto :eof
)
  call :runsub 5 testout "API, internals, and non-Perl stuff for UTF-8 support" -q
  call :runsub 5 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 5 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do6
if %ucp% EQU 0 (
  echo Test 6 Skipped due to absence of ucp support.
  goto :eof
)
  call :runsub 6 testout "Unicode property support - Compatible with Perl 5.10 and above" -q
  call :runsub 6 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 6 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do7
  call :runsub 7 testout "DFA matching" -q -dfa
  call :runsub 7 testoutstudy "Test with Study Override" -q -dfa -s
goto :eof

:do8
  if %utf8% EQU 0 (
  echo Test 8 Skipped due to absence of UTF-8 support.
  goto :eof
)
  call :runsub 8 testout "DFA matching with UTF-8" -q -dfa
  call :runsub 8 testoutstudy "Test with Study Override" -q -dfa -s
  goto :eof

:do9
  if %ucp% EQU 0 (
  echo Test 9 Skipped due to absence of ucp support.
  goto :eof
)
  call :runsub 9 testout "DFA matching with Unicode properties" -q -dfa
  call :runsub 9 testoutstudy "Test with Study Override" -q -dfa -s
goto :eof

:do10
  if %ucpandlink2% EQU 0 (
  echo Test 10 Skipped due to requirements of ucp support AND link size 2.
  goto :eof
)
  call :runsub 10 testout "Internal offsets and code size tests" -q
  call :runsub 10 testoutstudy "Test with Study Override" -q -s
goto :eof

:do11
  call :runsub 11 testout "Features from Perl 5.10 and above" -q
  call :runsub 11 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 11 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do12
  if %utf8% EQU 0 (
  echo Test 12 Skipped due to absence of UTF-8 support.
  goto :eof
)
  call :runsub 12 testout "Features from Perl 5.10 and above w UTF-8" -q
  call :runsub 12 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 12 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do13
  if %ucp% EQU 0 (
  echo Test 13 Skipped due to absence of ucp support.
  goto :eof
)
call :runsub 13 testout "API internals and non-Perl stuff for Unicode property support" -q
call :runsub 13 testoutstudy "Test with Study Override" -q -s
if %jit% EQU 1 call :runsub 13 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do14
if %jit% EQU 0 (
  echo Test 14 Skipped due to absence of JIT support.
  goto :eof
)
  call :runsub 14 testout "JIT-specific features - have JIT" -q
goto :eof

:do15
  if %jit% EQU 1 (
  echo Test 15 Skipped due to presence of JIT support.
  goto :eof
)
  call :runsub 15 testout "JIT-specific features - no JIT" -q
goto :eof

:conferror
@echo.
@echo Either your build is incomplete or you have a configuration error.
@echo.
@echo If configured with cmake and executed via "make test" or the MSVC "RUN_TESTS"
@echo project, pcre_test.bat defines variables and automatically calls RunTest.bat.
@echo For manual testing of all available features, after configuring with cmake
@echo and building, you can run the built pcre_test.bat. For best results with
@echo cmake builds and tests avoid directories with full path names that include
@echo spaces for source or build.
@echo.
@echo Otherwise, if the build dir is in a subdir of the source dir, testdata needed
@echo for input and verification should be found automatically when (from the
@echo location of the the built exes) you call RunTest.bat. By default RunTest.bat
@echo runs all tests compatible with the linked pcre library but it can be given
@echo a test number as an argument.
@echo.
@echo If the build dir is not under the source dir you can either copy your exes
@echo to the source folder or copy RunTest.bat and the testdata folder to the
@echo location of your built exes and then run RunTest.bat.
@echo.
goto :eof
1	@echo off
2	@rem This file must use CRLF linebreaks to function properly
3	@rem and requires both pcretest and pcregrep
4	@rem This file was originally contributed by Ralf Junker, and touched up by
5	@rem Daniel Richard G. Tests 10-12 added by Philip H.
6	@rem Philip H also changed test 3 to use "wintest" files.
7	@rem
8	@rem Updated by Tom Fortmann to support explicit test numbers on the command line.
9	@rem Added argument validation and added error reporting.
10	@rem
11	@rem MS Windows batch file to run pcretest on testfiles with the correct
12	@rem options.
13	@rem
14	@rem Sheri Pierce added logic to skip feature dependent tests
15	@rem tests 4 5 8 and 12 require utf8 support
16	@rem tests 6 9 13 require ucp support
17	@rem 10 requires ucp and link size 2
18	@rem 14 requires presense of jit support
19	@rem 15 requires absence of jit support
20	@rem Sheri P also added override tests for study and jit testing
21	@rem JIT testing n/a for tests 7-10, removed JIT override test for them
22	@rem removed override tests for 14-15
23
24	setlocal enabledelayedexpansion
25	if [%srcdir%]==[] (
26	if exist testdata\ set srcdir=.)
27	if [%srcdir%]==[] (
28	if exist ..\testdata\ set srcdir=..)
29	if [%srcdir%]==[] (
30	if exist ..\..\testdata\ set srcdir=..\..)
31	if NOT exist "%srcdir%\testdata\" (
32	Error: echo distribution testdata folder not found!
33	call :conferror
34	exit /b 1
35	goto :eof
36	)
37
38	if "%pcregrep%"=="" set pcregrep=.\pcregrep.exe
39	if "%pcretest%"=="" set pcretest=.\pcretest.exe
40
41	echo source dir is %srcdir%
42	echo pcretest=%pcretest%
43	echo pcregrep=%pcregrep%
44
45	if NOT exist "%pcregrep%" (
46	echo Error: "%pcregrep%" not found!
47	echo.
48	call :conferror
49	exit /b 1
50	)
51
52	if NOT exist "%pcretest%" (
53	echo Error: "%pcretest%" not found!
54	echo.
55	call :conferror
56	exit /b 1
57	)
58
59	"%pcretest%" -C\|"%pcregrep%" --no-jit "No UTF-8 support">NUL
60	set utf8=%ERRORLEVEL%
61	"%pcretest%" -C\|"%pcregrep%" --no-jit "No Unicode properties support">NUL
62	set ucp=%ERRORLEVEL%
63	"%pcretest%" -C\|"%pcregrep%" --no-jit "No just-in-time compiler support">NUL
64	set jit=%ERRORLEVEL%
65	"%pcretest%" -C\|"%pcregrep%" --no-jit "Internal link size = 2">NUL
66	set link2=%ERRORLEVEL%
67	set ucpandlink2=0
68	if %ucp% EQU 1 (
69	if %link2% EQU 0 set ucpandlink2=1
70	)
71
72	if not exist testout md testout
73	if not exist testoutstudy md testoutstudy
74	if not exist testoutjit md testoutjit
75
76	set do1=no
77	set do2=no
78	set do3=no
79	set do4=no
80	set do5=no
81	set do6=no
82	set do7=no
83	set do8=no
84	set do9=no
85	set do10=no
86	set do11=no
87	set do12=no
88	set do13=no
89	set do14=no
90	set do15=no
91	set all=yes
92
93	for %%a in (%*) do (
94	set valid=no
95	for %%v in (1 2 3 4 5 6 7 8 9 10 11 12 13 14 15) do if %%v == %%a set valid=yes
96	if "!valid!" == "yes" (
97	set do%%a=yes
98	set all=no
99	) else (
100	echo Invalid test number - %%a!
101	echo Usage %0 [ test_number ] ...
102	echo Where test_number is one or more optional test numbers 1 through 15, default is all tests.
103	exit /b 1
104	)
105	)
106	set failed="no"
107
108	if "%all%" == "yes" (
109	set do1=yes
110	set do2=yes
111	set do3=yes
112	set do4=yes
113	set do5=yes
114	set do6=yes
115	set do7=yes
116	set do8=yes
117	set do9=yes
118	set do10=yes
119	set do11=yes
120	set do12=yes
121	set do13=yes
122	set do14=yes
123	set do15=yes
124	)
125
126	@echo RunTest.bat's pcretest output is written to newly created subfolders named
127	@echo testout, testoutstudy and testoutjit.
128	@echo.
129	if "%do1%" == "yes" call :do1
130	if "%do2%" == "yes" call :do2
131	if "%do3%" == "yes" call :do3
132	if "%do4%" == "yes" call :do4
133	if "%do5%" == "yes" call :do5
134	if "%do6%" == "yes" call :do6
135	if "%do7%" == "yes" call :do7
136	if "%do8%" == "yes" call :do8
137	if "%do9%" == "yes" call :do9
138	if "%do10%" == "yes" call :do10
139	if "%do11%" == "yes" call :do11
140	if "%do12%" == "yes" call :do12
141	if "%do13%" == "yes" call :do13
142	if "%do14%" == "yes" call :do14
143	if "%do15%" == "yes" call :do15
144	if %failed% == "yes" (
145	echo In above output, one or more of the various tests failed!
146	exit /b 1
147	)
148	echo All OK
149	goto :eof
150
151	:runsub
152	@rem Function to execute pcretest and compare the output
153	@rem Arguments are as follows:
154	@rem
155	@rem 1 = test number
156	@rem 2 = outputdir
157	@rem 3 = test name use double quotes
158	@rem 4 - 9 = pcretest options
159
160	if [%1] == [] (
161	echo Missing test number argument!
162	exit /b 1
163	)
164
165	if [%2] == [] (
166	echo Missing outputdir!
167	exit /b 1
168	)
169
170	if [%3] == [] (
171	echo Missing test name argument!
172	exit /b 1
173	)
174
175	set testinput=testinput%1
176	set testoutput=testoutput%1
177	if exist %srcdir%\testdata\win%testinput% (
178	set testinput=wintestinput%1
179	set testoutput=wintestoutput%1
180	)
181
182	echo Test %1: %3
183	"%pcretest%" %4 %5 %6 %7 %8 %9 "%srcdir%\testdata\%testinput%">%2\%testoutput%
184	if errorlevel 1 (
185	echo. failed executing command-line:
186	echo. "%pcretest%" %4 %5 %6 %7 %8 %9 "%srcdir%\testdata\%testinput%"^>%2\%testoutput%
187	set failed="yes"
188	goto :eof
189	)
190
191	fc /n "%srcdir%\testdata\%testoutput%" "%2\%testoutput%">NUL
192	if errorlevel 1 (
193	echo. failed comparison: fc /n "%srcdir%\testdata\%testoutput%" "%2\%testoutput%"
194	set failed="yes"
195	if [%1]==[2] (
196	echo.
197	echo ** Test 2 requires a lot of stack. PCRE can be configured to
198	echo ** use heap for recursion. Otherwise, to pass Test 2
199	echo ** you generally need to allocate 8 mb stack to PCRE.
200	echo ** See the 'pcrestack' page for a discussion of PCRE's
201	echo ** stack usage.
202	echo.
203	)
204	if [%1]==[3] (
205	echo.
206	echo ** Test 3 failure usually means french locale is not
207	echo ** available on the system, rather than a bug or problem with PCRE.
208	echo.
209	)
210
211	goto :eof
212	)
213
214	echo. Passed.
215	goto :eof
216
217	:do1
218	call :runsub 1 testout "Main functionality - Compatible with Perl 5.8 and above" -q
219	call :runsub 1 testoutstudy "Test with Study Override" -q -s
220	if %jit% EQU 1 call :runsub 1 testoutjit "Test with JIT Override" -q -s+
221	goto :eof
222
223	:do2
224	call :runsub 2 testout "API, errors, internals, and non-Perl stuff (not UTF-8)" -q
225	call :runsub 2 testoutstudy "Test with Study Override" -q -s
226	if %jit% EQU 1 call :runsub 2 testoutjit "Test with JIT Override" -q -s+
227	goto :eof
228
229	:do3
230	call :runsub 3 testout "Locale-specific features" -q
231	call :runsub 3 testoutstudy "Test with Study Override" -q -s
232	if %jit% EQU 1 call :runsub 3 testoutjit "Test with JIT Override" -q -s+
233	goto :eof
234
235	:do4
236	if %utf8% EQU 0 (
237	echo Test 4 Skipped due to absence of UTF-8 support.
238	goto :eof
239	)
240	call :runsub 4 testout "UTF-8 support - Compatible with Perl 5.8 and above" -q
241	call :runsub 4 testoutstudy "Test with Study Override" -q -s
242	if %jit% EQU 1 call :runsub 4 testoutjit "Test with JIT Override" -q -s+
243	goto :eof
244
245	:do5
246	if %utf8% EQU 0 (
247	echo Test 5 Skipped due to absence of UTF-8 support.
248	goto :eof
249	)
250	call :runsub 5 testout "API, internals, and non-Perl stuff for UTF-8 support" -q
251	call :runsub 5 testoutstudy "Test with Study Override" -q -s
252	if %jit% EQU 1 call :runsub 5 testoutjit "Test with JIT Override" -q -s+
253	goto :eof
254
255	:do6
256	if %ucp% EQU 0 (
257	echo Test 6 Skipped due to absence of ucp support.
258	goto :eof
259	)
260	call :runsub 6 testout "Unicode property support - Compatible with Perl 5.10 and above" -q
261	call :runsub 6 testoutstudy "Test with Study Override" -q -s
262	if %jit% EQU 1 call :runsub 6 testoutjit "Test with JIT Override" -q -s+
263	goto :eof
264
265	:do7
266	call :runsub 7 testout "DFA matching" -q -dfa
267	call :runsub 7 testoutstudy "Test with Study Override" -q -dfa -s
268	goto :eof
269
270	:do8
271	if %utf8% EQU 0 (
272	echo Test 8 Skipped due to absence of UTF-8 support.
273	goto :eof
274	)
275	call :runsub 8 testout "DFA matching with UTF-8" -q -dfa
276	call :runsub 8 testoutstudy "Test with Study Override" -q -dfa -s
277	goto :eof
278
279	:do9
280	if %ucp% EQU 0 (
281	echo Test 9 Skipped due to absence of ucp support.
282	goto :eof
283	)
284	call :runsub 9 testout "DFA matching with Unicode properties" -q -dfa
285	call :runsub 9 testoutstudy "Test with Study Override" -q -dfa -s
286	goto :eof
287
288	:do10
289	if %ucpandlink2% EQU 0 (
290	echo Test 10 Skipped due to requirements of ucp support AND link size 2.
291	goto :eof
292	)
293	call :runsub 10 testout "Internal offsets and code size tests" -q
294	call :runsub 10 testoutstudy "Test with Study Override" -q -s
295	goto :eof
296
297	:do11
298	call :runsub 11 testout "Features from Perl 5.10 and above" -q
299	call :runsub 11 testoutstudy "Test with Study Override" -q -s
300	if %jit% EQU 1 call :runsub 11 testoutjit "Test with JIT Override" -q -s+
301	goto :eof
302
303	:do12
304	if %utf8% EQU 0 (
305	echo Test 12 Skipped due to absence of UTF-8 support.
306	goto :eof
307	)
308	call :runsub 12 testout "Features from Perl 5.10 and above w UTF-8" -q
309	call :runsub 12 testoutstudy "Test with Study Override" -q -s
310	if %jit% EQU 1 call :runsub 12 testoutjit "Test with JIT Override" -q -s+
311	goto :eof
312
313	:do13
314	if %ucp% EQU 0 (
315	echo Test 13 Skipped due to absence of ucp support.
316	goto :eof
317	)
318	call :runsub 13 testout "API internals and non-Perl stuff for Unicode property support" -q
319	call :runsub 13 testoutstudy "Test with Study Override" -q -s
320	if %jit% EQU 1 call :runsub 13 testoutjit "Test with JIT Override" -q -s+
321	goto :eof
322
323	:do14
324	if %jit% EQU 0 (
325	echo Test 14 Skipped due to absence of JIT support.
326	goto :eof
327	)
328	call :runsub 14 testout "JIT-specific features - have JIT" -q
329	goto :eof
330
331	:do15
332	if %jit% EQU 1 (
333	echo Test 15 Skipped due to presence of JIT support.
334	goto :eof
335	)
336	call :runsub 15 testout "JIT-specific features - no JIT" -q
337	goto :eof
338
339	:conferror
340	@echo.
341	@echo Either your build is incomplete or you have a configuration error.
342	@echo.
343	@echo If configured with cmake and executed via "make test" or the MSVC "RUN_TESTS"
344	@echo project, pcre_test.bat defines variables and automatically calls RunTest.bat.
345	@echo For manual testing of all available features, after configuring with cmake
346	@echo and building, you can run the built pcre_test.bat. For best results with
347	@echo cmake builds and tests avoid directories with full path names that include
348	@echo spaces for source or build.
349	@echo.
350	@echo Otherwise, if the build dir is in a subdir of the source dir, testdata needed
351	@echo for input and verification should be found automatically when (from the
352	@echo location of the the built exes) you call RunTest.bat. By default RunTest.bat
353	@echo runs all tests compatible with the linked pcre library but it can be given
354	@echo a test number as an argument.
355	@echo.
356	@echo If the build dir is not under the source dir you can either copy your exes
357	@echo to the source folder or copy RunTest.bat and the testdata folder to the
358	@echo location of your built exes and then run RunTest.bat.
359	@echo.
360	goto :eof