/[pcre]/code/branches/pcre16/pcretest.c
ViewVC logotype

Diff of /code/branches/pcre16/pcretest.c

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 73 by nigel, Sat Feb 24 21:40:30 2007 UTC revision 626 by ph10, Wed Jul 20 17:51:54 2011 UTC
# Line 4  Line 4 
4    
5  /* This program was hacked up as a tester for PCRE. I really should have  /* This program was hacked up as a tester for PCRE. I really should have
6  written it more tidily in the first place. Will I ever learn? It has grown and  written it more tidily in the first place. Will I ever learn? It has grown and
7  been extended and consequently is now rather untidy in places. */  been extended and consequently is now rather, er, *very* untidy in places.
8    
9    -----------------------------------------------------------------------------
10    Redistribution and use in source and binary forms, with or without
11    modification, are permitted provided that the following conditions are met:
12    
13        * Redistributions of source code must retain the above copyright notice,
14          this list of conditions and the following disclaimer.
15    
16        * Redistributions in binary form must reproduce the above copyright
17          notice, this list of conditions and the following disclaimer in the
18          documentation and/or other materials provided with the distribution.
19    
20        * Neither the name of the University of Cambridge nor the names of its
21          contributors may be used to endorse or promote products derived from
22          this software without specific prior written permission.
23    
24    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25    AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27    ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34    POSSIBILITY OF SUCH DAMAGE.
35    -----------------------------------------------------------------------------
36    */
37    
38    
39    #ifdef HAVE_CONFIG_H
40    #include "config.h"
41    #endif
42    
43  #include <ctype.h>  #include <ctype.h>
44  #include <stdio.h>  #include <stdio.h>
# Line 12  been extended and consequently is now ra Line 46  been extended and consequently is now ra
46  #include <stdlib.h>  #include <stdlib.h>
47  #include <time.h>  #include <time.h>
48  #include <locale.h>  #include <locale.h>
49    #include <errno.h>
50    
51    #ifdef SUPPORT_LIBREADLINE
52    #ifdef HAVE_UNISTD_H
53    #include <unistd.h>
54    #endif
55    #include <readline/readline.h>
56    #include <readline/history.h>
57    #endif
58    
59    
60    /* A number of things vary for Windows builds. Originally, pcretest opened its
61    input and output without "b"; then I was told that "b" was needed in some
62    environments, so it was added for release 5.0 to both the input and output. (It
63    makes no difference on Unix-like systems.) Later I was told that it is wrong
64    for the input on Windows. I've now abstracted the modes into two macros that
65    are set here, to make it easier to fiddle with them, and removed "b" from the
66    input mode under Windows. */
67    
68    #if defined(_WIN32) || defined(WIN32)
69    #include <io.h>                /* For _setmode() */
70    #include <fcntl.h>             /* For _O_BINARY */
71    #define INPUT_MODE   "r"
72    #define OUTPUT_MODE  "wb"
73    
74    #ifndef isatty
75    #define isatty _isatty         /* This is what Windows calls them, I'm told, */
76    #endif                         /* though in some environments they seem to   */
77                                   /* be already defined, hence the #ifndefs.    */
78    #ifndef fileno
79    #define fileno _fileno
80    #endif
81    
82    /* A user sent this fix for Borland Builder 5 under Windows. */
83    
84    #ifdef __BORLANDC__
85    #define _setmode(handle, mode) setmode(handle, mode)
86    #endif
87    
88    /* Not Windows */
89    
90    #else
91    #include <sys/time.h>          /* These two includes are needed */
92    #include <sys/resource.h>      /* for setrlimit(). */
93    #define INPUT_MODE   "rb"
94    #define OUTPUT_MODE  "wb"
95    #endif
96    
 /* We need the internal info for displaying the results of pcre_study(). Also  
 for getting the opcodes for showing compiled code. */  
97    
98  #define PCRE_SPY        /* For Win32 build, import data, not export */  /* We have to include pcre_internal.h because we need the internal info for
99  #include "internal.h"  displaying the results of pcre_study() and we also need to know about the
100    internal macros, structures, and other internal data values; pcretest has
101    "inside information" compared to a program that strictly follows the PCRE API.
102    
103    Although pcre_internal.h does itself include pcre.h, we explicitly include it
104    here before pcre_internal.h so that the PCRE_EXP_xxx macros get set
105    appropriately for an application, not for building PCRE. */
106    
107    #include "pcre.h"
108    #include "pcre_internal.h"
109    
110    /* We need access to some of the data tables that PCRE uses. So as not to have
111    to keep two copies, we include the source file here, changing the names of the
112    external symbols to prevent clashes. */
113    
114    #define _pcre_ucp_gentype      ucp_gentype
115    #define _pcre_utf8_table1      utf8_table1
116    #define _pcre_utf8_table1_size utf8_table1_size
117    #define _pcre_utf8_table2      utf8_table2
118    #define _pcre_utf8_table3      utf8_table3
119    #define _pcre_utf8_table4      utf8_table4
120    #define _pcre_utt              utt
121    #define _pcre_utt_size         utt_size
122    #define _pcre_utt_names        utt_names
123    #define _pcre_OP_lengths       OP_lengths
124    
125    #include "pcre_tables.c"
126    
127    /* We also need the pcre_printint() function for printing out compiled
128    patterns. This function is in a separate file so that it can be included in
129    pcre_compile.c when that module is compiled with debugging enabled. It needs to
130    know which case is being compiled. */
131    
132    #define COMPILING_PCRETEST
133    #include "pcre_printint.src"
134    
135    /* The definition of the macro PRINTABLE, which determines whether to print an
136    output character as-is or as a hex value when showing compiled patterns, is
137    contained in the printint.src file. We uses it here also, in cases when the
138    locale has not been explicitly changed, so as to get consistent output from
139    systems that differ in their output from isprint() even in the "C" locale. */
140    
141    #define PRINTHEX(c) (locale_set? isprint(c) : PRINTABLE(c))
142    
143  /* It is possible to compile this test program without including support for  /* It is possible to compile this test program without including support for
144  testing the POSIX interface, though this is not available via the standard  testing the POSIX interface, though this is not available via the standard
# Line 27  Makefile. */ Line 148  Makefile. */
148  #include "pcreposix.h"  #include "pcreposix.h"
149  #endif  #endif
150    
151    /* It is also possible, for the benefit of the version currently imported into
152    Exim, to build pcretest without support for UTF8 (define NOUTF8), without the
153    interface to the DFA matcher (NODFA), and without the doublecheck of the old
154    "info" function (define NOINFOCHECK). In fact, we automatically cut out the
155    UTF8 support if PCRE is built without it. */
156    
157    #ifndef SUPPORT_UTF8
158    #ifndef NOUTF8
159    #define NOUTF8
160    #endif
161    #endif
162    
163    
164    /* Other parameters */
165    
166  #ifndef CLOCKS_PER_SEC  #ifndef CLOCKS_PER_SEC
167  #ifdef CLK_TCK  #ifdef CLK_TCK
168  #define CLOCKS_PER_SEC CLK_TCK  #define CLOCKS_PER_SEC CLK_TCK
# Line 35  Makefile. */ Line 171  Makefile. */
171  #endif  #endif
172  #endif  #endif
173    
174  #define LOOPREPEAT 50000  /* This is the default loop count for timing. */
175    
176  #define BUFFER_SIZE 30000  #define LOOPREPEAT 500000
 #define DBUFFER_SIZE BUFFER_SIZE  
177    
178    /* Static variables */
179    
180  static FILE *outfile;  static FILE *outfile;
181  static int log_store = 0;  static int log_store = 0;
# Line 47  static int callout_count; Line 183  static int callout_count;
183  static int callout_extra;  static int callout_extra;
184  static int callout_fail_count;  static int callout_fail_count;
185  static int callout_fail_id;  static int callout_fail_id;
186    static int debug_lengths;
187  static int first_callout;  static int first_callout;
188    static int locale_set = 0;
189  static int show_malloc;  static int show_malloc;
190  static int use_utf8;  static int use_utf8;
191  static size_t gotten_store;  static size_t gotten_store;
192    
193    /* The buffers grow automatically if very long input lines are encountered. */
194    
195  static const int utf8_table1[] = {  static int buffer_size = 50000;
196    0x0000007f, 0x000007ff, 0x0000ffff, 0x001fffff, 0x03ffffff, 0x7fffffff};  static uschar *buffer = NULL;
197    static uschar *dbuffer = NULL;
198    static uschar *pbuffer = NULL;
199    
200    /* Textual explanations for runtime error codes */
201    
202    static const char *errtexts[] = {
203      NULL,  /* 0 is no error */
204      NULL,  /* NOMATCH is handled specially */
205      "NULL argument passed",
206      "bad option value",
207      "magic number missing",
208      "unknown opcode - pattern overwritten?",
209      "no more memory",
210      NULL,  /* never returned by pcre_exec() or pcre_dfa_exec() */
211      "match limit exceeded",
212      "callout error code",
213      NULL,  /* BADUTF8 is handled specially */
214      "bad UTF-8 offset",
215      NULL,  /* PARTIAL is handled specially */
216      "not used - internal error",
217      "internal error - pattern overwritten?",
218      "bad count value",
219      "item unsupported for DFA matching",
220      "backreference condition or recursion test not supported for DFA matching",
221      "match limit not supported for DFA matching",
222      "workspace size exceeded in DFA matching",
223      "too much recursion for DFA matching",
224      "recursion limit exceeded",
225      "not used - internal error",
226      "invalid combination of newline options",
227      "bad offset value",
228      NULL  /* SHORTUTF8 is handled specially */
229    };
230    
231    
232  static const int utf8_table2[] = {  /*************************************************
233    0, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc};  *         Alternate character tables             *
234    *************************************************/
235    
236    /* By default, the "tables" pointer when calling PCRE is set to NULL, thereby
237    using the default tables of the library. However, the T option can be used to
238    select alternate sets of tables, for different kinds of testing. Note also that
239    the L (locale) option also adjusts the tables. */
240    
241    /* This is the set of tables distributed as default with PCRE. It recognizes
242    only ASCII characters. */
243    
244    static const unsigned char tables0[] = {
245    
246    /* This table is a lower casing table. */
247    
248        0,  1,  2,  3,  4,  5,  6,  7,
249        8,  9, 10, 11, 12, 13, 14, 15,
250       16, 17, 18, 19, 20, 21, 22, 23,
251       24, 25, 26, 27, 28, 29, 30, 31,
252       32, 33, 34, 35, 36, 37, 38, 39,
253       40, 41, 42, 43, 44, 45, 46, 47,
254       48, 49, 50, 51, 52, 53, 54, 55,
255       56, 57, 58, 59, 60, 61, 62, 63,
256       64, 97, 98, 99,100,101,102,103,
257      104,105,106,107,108,109,110,111,
258      112,113,114,115,116,117,118,119,
259      120,121,122, 91, 92, 93, 94, 95,
260       96, 97, 98, 99,100,101,102,103,
261      104,105,106,107,108,109,110,111,
262      112,113,114,115,116,117,118,119,
263      120,121,122,123,124,125,126,127,
264      128,129,130,131,132,133,134,135,
265      136,137,138,139,140,141,142,143,
266      144,145,146,147,148,149,150,151,
267      152,153,154,155,156,157,158,159,
268      160,161,162,163,164,165,166,167,
269      168,169,170,171,172,173,174,175,
270      176,177,178,179,180,181,182,183,
271      184,185,186,187,188,189,190,191,
272      192,193,194,195,196,197,198,199,
273      200,201,202,203,204,205,206,207,
274      208,209,210,211,212,213,214,215,
275      216,217,218,219,220,221,222,223,
276      224,225,226,227,228,229,230,231,
277      232,233,234,235,236,237,238,239,
278      240,241,242,243,244,245,246,247,
279      248,249,250,251,252,253,254,255,
280    
281    /* This table is a case flipping table. */
282    
283        0,  1,  2,  3,  4,  5,  6,  7,
284        8,  9, 10, 11, 12, 13, 14, 15,
285       16, 17, 18, 19, 20, 21, 22, 23,
286       24, 25, 26, 27, 28, 29, 30, 31,
287       32, 33, 34, 35, 36, 37, 38, 39,
288       40, 41, 42, 43, 44, 45, 46, 47,
289       48, 49, 50, 51, 52, 53, 54, 55,
290       56, 57, 58, 59, 60, 61, 62, 63,
291       64, 97, 98, 99,100,101,102,103,
292      104,105,106,107,108,109,110,111,
293      112,113,114,115,116,117,118,119,
294      120,121,122, 91, 92, 93, 94, 95,
295       96, 65, 66, 67, 68, 69, 70, 71,
296       72, 73, 74, 75, 76, 77, 78, 79,
297       80, 81, 82, 83, 84, 85, 86, 87,
298       88, 89, 90,123,124,125,126,127,
299      128,129,130,131,132,133,134,135,
300      136,137,138,139,140,141,142,143,
301      144,145,146,147,148,149,150,151,
302      152,153,154,155,156,157,158,159,
303      160,161,162,163,164,165,166,167,
304      168,169,170,171,172,173,174,175,
305      176,177,178,179,180,181,182,183,
306      184,185,186,187,188,189,190,191,
307      192,193,194,195,196,197,198,199,
308      200,201,202,203,204,205,206,207,
309      208,209,210,211,212,213,214,215,
310      216,217,218,219,220,221,222,223,
311      224,225,226,227,228,229,230,231,
312      232,233,234,235,236,237,238,239,
313      240,241,242,243,244,245,246,247,
314      248,249,250,251,252,253,254,255,
315    
316    /* This table contains bit maps for various character classes. Each map is 32
317    bytes long and the bits run from the least significant end of each byte. The
318    classes that have their own maps are: space, xdigit, digit, upper, lower, word,
319    graph, print, punct, and cntrl. Other classes are built from combinations. */
320    
321      0x00,0x3e,0x00,0x00,0x01,0x00,0x00,0x00,
322      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
323      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
324      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
325    
326      0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
327      0x7e,0x00,0x00,0x00,0x7e,0x00,0x00,0x00,
328      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
329      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
330    
331      0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
332      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
333      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
334      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
335    
336      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
337      0xfe,0xff,0xff,0x07,0x00,0x00,0x00,0x00,
338      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
339      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
340    
341      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
342      0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0x07,
343      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
344      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
345    
346      0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
347      0xfe,0xff,0xff,0x87,0xfe,0xff,0xff,0x07,
348      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
349      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
350    
351      0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0xff,
352      0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,
353      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
354      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
355    
356      0x00,0x00,0x00,0x00,0xff,0xff,0xff,0xff,
357      0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,
358      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
359      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
360    
361      0x00,0x00,0x00,0x00,0xfe,0xff,0x00,0xfc,
362      0x01,0x00,0x00,0xf8,0x01,0x00,0x00,0x78,
363      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
364      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
365    
366      0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x00,
367      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
368      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
369      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
370    
371    /* This table identifies various classes of character by individual bits:
372      0x01   white space character
373      0x02   letter
374      0x04   decimal digit
375      0x08   hexadecimal digit
376      0x10   alphanumeric or '_'
377      0x80   regular expression metacharacter or binary zero
378    */
379    
380      0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7 */
381      0x00,0x01,0x01,0x00,0x01,0x01,0x00,0x00, /*   8- 15 */
382      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  16- 23 */
383      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  24- 31 */
384      0x01,0x00,0x00,0x00,0x80,0x00,0x00,0x00, /*    - '  */
385      0x80,0x80,0x80,0x80,0x00,0x00,0x80,0x00, /*  ( - /  */
386      0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /*  0 - 7  */
387      0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x80, /*  8 - ?  */
388      0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /*  @ - G  */
389      0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  H - O  */
390      0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  P - W  */
391      0x12,0x12,0x12,0x80,0x80,0x00,0x80,0x10, /*  X - _  */
392      0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /*  ` - g  */
393      0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  h - o  */
394      0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  p - w  */
395      0x12,0x12,0x12,0x80,0x80,0x00,0x00,0x00, /*  x -127 */
396      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */
397      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */
398      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */
399      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */
400      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */
401      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */
402      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */
403      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
404      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */
405      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */
406      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */
407      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */
408      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */
409      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */
410      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
411      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */
412    
413    /* This is a set of tables that came orginally from a Windows user. It seems to
414    be at least an approximation of ISO 8859. In particular, there are characters
415    greater than 128 that are marked as spaces, letters, etc. */
416    
417    static const unsigned char tables1[] = {
418    0,1,2,3,4,5,6,7,
419    8,9,10,11,12,13,14,15,
420    16,17,18,19,20,21,22,23,
421    24,25,26,27,28,29,30,31,
422    32,33,34,35,36,37,38,39,
423    40,41,42,43,44,45,46,47,
424    48,49,50,51,52,53,54,55,
425    56,57,58,59,60,61,62,63,
426    64,97,98,99,100,101,102,103,
427    104,105,106,107,108,109,110,111,
428    112,113,114,115,116,117,118,119,
429    120,121,122,91,92,93,94,95,
430    96,97,98,99,100,101,102,103,
431    104,105,106,107,108,109,110,111,
432    112,113,114,115,116,117,118,119,
433    120,121,122,123,124,125,126,127,
434    128,129,130,131,132,133,134,135,
435    136,137,138,139,140,141,142,143,
436    144,145,146,147,148,149,150,151,
437    152,153,154,155,156,157,158,159,
438    160,161,162,163,164,165,166,167,
439    168,169,170,171,172,173,174,175,
440    176,177,178,179,180,181,182,183,
441    184,185,186,187,188,189,190,191,
442    224,225,226,227,228,229,230,231,
443    232,233,234,235,236,237,238,239,
444    240,241,242,243,244,245,246,215,
445    248,249,250,251,252,253,254,223,
446    224,225,226,227,228,229,230,231,
447    232,233,234,235,236,237,238,239,
448    240,241,242,243,244,245,246,247,
449    248,249,250,251,252,253,254,255,
450    0,1,2,3,4,5,6,7,
451    8,9,10,11,12,13,14,15,
452    16,17,18,19,20,21,22,23,
453    24,25,26,27,28,29,30,31,
454    32,33,34,35,36,37,38,39,
455    40,41,42,43,44,45,46,47,
456    48,49,50,51,52,53,54,55,
457    56,57,58,59,60,61,62,63,
458    64,97,98,99,100,101,102,103,
459    104,105,106,107,108,109,110,111,
460    112,113,114,115,116,117,118,119,
461    120,121,122,91,92,93,94,95,
462    96,65,66,67,68,69,70,71,
463    72,73,74,75,76,77,78,79,
464    80,81,82,83,84,85,86,87,
465    88,89,90,123,124,125,126,127,
466    128,129,130,131,132,133,134,135,
467    136,137,138,139,140,141,142,143,
468    144,145,146,147,148,149,150,151,
469    152,153,154,155,156,157,158,159,
470    160,161,162,163,164,165,166,167,
471    168,169,170,171,172,173,174,175,
472    176,177,178,179,180,181,182,183,
473    184,185,186,187,188,189,190,191,
474    224,225,226,227,228,229,230,231,
475    232,233,234,235,236,237,238,239,
476    240,241,242,243,244,245,246,215,
477    248,249,250,251,252,253,254,223,
478    192,193,194,195,196,197,198,199,
479    200,201,202,203,204,205,206,207,
480    208,209,210,211,212,213,214,247,
481    216,217,218,219,220,221,222,255,
482    0,62,0,0,1,0,0,0,
483    0,0,0,0,0,0,0,0,
484    32,0,0,0,1,0,0,0,
485    0,0,0,0,0,0,0,0,
486    0,0,0,0,0,0,255,3,
487    126,0,0,0,126,0,0,0,
488    0,0,0,0,0,0,0,0,
489    0,0,0,0,0,0,0,0,
490    0,0,0,0,0,0,255,3,
491    0,0,0,0,0,0,0,0,
492    0,0,0,0,0,0,12,2,
493    0,0,0,0,0,0,0,0,
494    0,0,0,0,0,0,0,0,
495    254,255,255,7,0,0,0,0,
496    0,0,0,0,0,0,0,0,
497    255,255,127,127,0,0,0,0,
498    0,0,0,0,0,0,0,0,
499    0,0,0,0,254,255,255,7,
500    0,0,0,0,0,4,32,4,
501    0,0,0,128,255,255,127,255,
502    0,0,0,0,0,0,255,3,
503    254,255,255,135,254,255,255,7,
504    0,0,0,0,0,4,44,6,
505    255,255,127,255,255,255,127,255,
506    0,0,0,0,254,255,255,255,
507    255,255,255,255,255,255,255,127,
508    0,0,0,0,254,255,255,255,
509    255,255,255,255,255,255,255,255,
510    0,2,0,0,255,255,255,255,
511    255,255,255,255,255,255,255,127,
512    0,0,0,0,255,255,255,255,
513    255,255,255,255,255,255,255,255,
514    0,0,0,0,254,255,0,252,
515    1,0,0,248,1,0,0,120,
516    0,0,0,0,254,255,255,255,
517    0,0,128,0,0,0,128,0,
518    255,255,255,255,0,0,0,0,
519    0,0,0,0,0,0,0,128,
520    255,255,255,255,0,0,0,0,
521    0,0,0,0,0,0,0,0,
522    128,0,0,0,0,0,0,0,
523    0,1,1,0,1,1,0,0,
524    0,0,0,0,0,0,0,0,
525    0,0,0,0,0,0,0,0,
526    1,0,0,0,128,0,0,0,
527    128,128,128,128,0,0,128,0,
528    28,28,28,28,28,28,28,28,
529    28,28,0,0,0,0,0,128,
530    0,26,26,26,26,26,26,18,
531    18,18,18,18,18,18,18,18,
532    18,18,18,18,18,18,18,18,
533    18,18,18,128,128,0,128,16,
534    0,26,26,26,26,26,26,18,
535    18,18,18,18,18,18,18,18,
536    18,18,18,18,18,18,18,18,
537    18,18,18,128,128,0,0,0,
538    0,0,0,0,0,1,0,0,
539    0,0,0,0,0,0,0,0,
540    0,0,0,0,0,0,0,0,
541    0,0,0,0,0,0,0,0,
542    1,0,0,0,0,0,0,0,
543    0,0,18,0,0,0,0,0,
544    0,0,20,20,0,18,0,0,
545    0,20,18,0,0,0,0,0,
546    18,18,18,18,18,18,18,18,
547    18,18,18,18,18,18,18,18,
548    18,18,18,18,18,18,18,0,
549    18,18,18,18,18,18,18,18,
550    18,18,18,18,18,18,18,18,
551    18,18,18,18,18,18,18,18,
552    18,18,18,18,18,18,18,0,
553    18,18,18,18,18,18,18,18
554    };
555    
 static const int utf8_table3[] = {  
   0xff, 0x1f, 0x0f, 0x07, 0x03, 0x01};  
556    
557    
558    
559    #ifndef HAVE_STRERROR
560  /*************************************************  /*************************************************
561  *         Print compiled regex                   *  *     Provide strerror() for non-ANSI libraries  *
562  *************************************************/  *************************************************/
563    
564  /* The code for doing this is held in a separate file that is also included in  /* Some old-fashioned systems still around (e.g. SunOS4) don't have strerror()
565  pcre.c when it is compiled with the debug switch. It defines a function called  in their libraries, but can provide the same facility by this simple
566  print_internals(), which uses a table of opcode lengths defined by the macro  alternative function. */
567  OP_LENGTHS, whose name must be OP_lengths. */  
568    extern int   sys_nerr;
569    extern char *sys_errlist[];
570    
571    char *
572    strerror(int n)
573    {
574    if (n < 0 || n >= sys_nerr) return "unknown error number";
575    return sys_errlist[n];
576    }
577    #endif /* HAVE_STRERROR */
578    
579    
580    
581    
582    /*************************************************
583    *        Read or extend an input line            *
584    *************************************************/
585    
586    /* Input lines are read into buffer, but both patterns and data lines can be
587    continued over multiple input lines. In addition, if the buffer fills up, we
588    want to automatically expand it so as to be able to handle extremely large
589    lines that are needed for certain stress tests. When the input buffer is
590    expanded, the other two buffers must also be expanded likewise, and the
591    contents of pbuffer, which are a copy of the input for callouts, must be
592    preserved (for when expansion happens for a data line). This is not the most
593    optimal way of handling this, but hey, this is just a test program!
594    
595    Arguments:
596      f            the file to read
597      start        where in buffer to start (this *must* be within buffer)
598      prompt       for stdin or readline()
599    
600    Returns:       pointer to the start of new data
601                   could be a copy of start, or could be moved
602                   NULL if no data read and EOF reached
603    */
604    
605    static uschar *
606    extend_inputline(FILE *f, uschar *start, const char *prompt)
607    {
608    uschar *here = start;
609    
610    for (;;)
611      {
612      int rlen = (int)(buffer_size - (here - buffer));
613    
614      if (rlen > 1000)
615        {
616        int dlen;
617    
618        /* If libreadline support is required, use readline() to read a line if the
619        input is a terminal. Note that readline() removes the trailing newline, so
620        we must put it back again, to be compatible with fgets(). */
621    
622    #ifdef SUPPORT_LIBREADLINE
623        if (isatty(fileno(f)))
624          {
625          size_t len;
626          char *s = readline(prompt);
627          if (s == NULL) return (here == start)? NULL : start;
628          len = strlen(s);
629          if (len > 0) add_history(s);
630          if (len > rlen - 1) len = rlen - 1;
631          memcpy(here, s, len);
632          here[len] = '\n';
633          here[len+1] = 0;
634          free(s);
635          }
636        else
637    #endif
638    
639        /* Read the next line by normal means, prompting if the file is stdin. */
640    
641          {
642          if (f == stdin) printf("%s", prompt);
643          if (fgets((char *)here, rlen,  f) == NULL)
644            return (here == start)? NULL : start;
645          }
646    
647        dlen = (int)strlen((char *)here);
648        if (dlen > 0 && here[dlen - 1] == '\n') return start;
649        here += dlen;
650        }
651    
652      else
653        {
654        int new_buffer_size = 2*buffer_size;
655        uschar *new_buffer = (unsigned char *)malloc(new_buffer_size);
656        uschar *new_dbuffer = (unsigned char *)malloc(new_buffer_size);
657        uschar *new_pbuffer = (unsigned char *)malloc(new_buffer_size);
658    
659        if (new_buffer == NULL || new_dbuffer == NULL || new_pbuffer == NULL)
660          {
661          fprintf(stderr, "pcretest: malloc(%d) failed\n", new_buffer_size);
662          exit(1);
663          }
664    
665        memcpy(new_buffer, buffer, buffer_size);
666        memcpy(new_pbuffer, pbuffer, buffer_size);
667    
668        buffer_size = new_buffer_size;
669    
670        start = new_buffer + (start - buffer);
671        here = new_buffer + (here - buffer);
672    
673        free(buffer);
674        free(dbuffer);
675        free(pbuffer);
676    
677        buffer = new_buffer;
678        dbuffer = new_dbuffer;
679        pbuffer = new_pbuffer;
680        }
681      }
682    
683    return NULL;  /* Control never gets here */
684    }
685    
686    
687    
 static uschar OP_lengths[] = { OP_LENGTHS };  
688    
 #include "printint.c"  
689    
690    
691    
# Line 85  static uschar OP_lengths[] = { OP_LENGTH Line 695  static uschar OP_lengths[] = { OP_LENGTH
695    
696  /* We don't use strtoul() because SunOS4 doesn't have it. Rather than mess  /* We don't use strtoul() because SunOS4 doesn't have it. Rather than mess
697  around with conditional compilation, just do the job by hand. It is only used  around with conditional compilation, just do the job by hand. It is only used
698  for unpicking the -o argument, so just keep it simple.  for unpicking arguments, so just keep it simple.
699    
700  Arguments:  Arguments:
701    str           string to be converted    str           string to be converted
# Line 106  return(result); Line 716  return(result);
716    
717    
718    
 /*************************************************  
 *       Convert character value to UTF-8         *  
 *************************************************/  
   
 /* This function takes an integer value in the range 0 - 0x7fffffff  
 and encodes it as a UTF-8 character in 0 to 6 bytes.  
   
 Arguments:  
   cvalue     the character value  
   buffer     pointer to buffer for result - at least 6 bytes long  
   
 Returns:     number of characters placed in the buffer  
              -1 if input character is negative  
              0 if input character is positive but too big (only when  
              int is longer than 32 bits)  
 */  
   
 static int  
 ord2utf8(int cvalue, unsigned char *buffer)  
 {  
 register int i, j;  
 for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++)  
   if (cvalue <= utf8_table1[i]) break;  
 if (i >= sizeof(utf8_table1)/sizeof(int)) return 0;  
 if (cvalue < 0) return -1;  
   
 buffer += i;  
 for (j = i; j > 0; j--)  
  {  
  *buffer-- = 0x80 | (cvalue & 0x3f);  
  cvalue >>= 6;  
  }  
 *buffer = utf8_table2[i] | cvalue;  
 return i + 1;  
 }  
   
719    
720  /*************************************************  /*************************************************
721  *            Convert UTF-8 string to value       *  *            Convert UTF-8 string to value       *
# Line 151  return i + 1; Line 725  return i + 1;
725  and returns the value of the character.  and returns the value of the character.
726    
727  Argument:  Argument:
728    buffer   a pointer to the byte vector    utf8bytes   a pointer to the byte vector
729    vptr     a pointer to an int to receive the value    vptr        a pointer to an int to receive the value
730    
731  Returns:   >  0 => the number of bytes consumed  Returns:      >  0 => the number of bytes consumed
732             -6 to 0 => malformed UTF-8 character at offset = (-return)                -6 to 0 => malformed UTF-8 character at offset = (-return)
733  */  */
734    
735    #if !defined NOUTF8
736    
737  static int  static int
738  utf82ord(unsigned char *buffer, int *vptr)  utf82ord(unsigned char *utf8bytes, int *vptr)
739  {  {
740  int c = *buffer++;  int c = *utf8bytes++;
741  int d = c;  int d = c;
742  int i, j, s;  int i, j, s;
743    
# Line 181  d = (c & utf8_table3[i]) << s; Line 757  d = (c & utf8_table3[i]) << s;
757    
758  for (j = 0; j < i; j++)  for (j = 0; j < i; j++)
759    {    {
760    c = *buffer++;    c = *utf8bytes++;
761    if ((c & 0xc0) != 0x80) return -(j+1);    if ((c & 0xc0) != 0x80) return -(j+1);
762    s -= 6;    s -= 6;
763    d |= (c & 0x3f) << s;    d |= (c & 0x3f) << s;
# Line 189  for (j = 0; j < i; j++) Line 765  for (j = 0; j < i; j++)
765    
766  /* Check that encoding was the correct unique one */  /* Check that encoding was the correct unique one */
767    
768  for (j = 0; j < sizeof(utf8_table1)/sizeof(int); j++)  for (j = 0; j < utf8_table1_size; j++)
769    if (d <= utf8_table1[j]) break;    if (d <= utf8_table1[j]) break;
770  if (j != i) return -(i+1);  if (j != i) return -(i+1);
771    
# Line 199  if (j != i) return -(i+1); Line 775  if (j != i) return -(i+1);
775  return i+1;  return i+1;
776  }  }
777    
778    #endif
779    
780    
781    
782    /*************************************************
783    *       Convert character value to UTF-8         *
784    *************************************************/
785    
786    /* This function takes an integer value in the range 0 - 0x7fffffff
787    and encodes it as a UTF-8 character in 0 to 6 bytes.
788    
789    Arguments:
790      cvalue     the character value
791      utf8bytes  pointer to buffer for result - at least 6 bytes long
792    
793    Returns:     number of characters placed in the buffer
794    */
795    
796    #if !defined NOUTF8
797    
798    static int
799    ord2utf8(int cvalue, uschar *utf8bytes)
800    {
801    register int i, j;
802    for (i = 0; i < utf8_table1_size; i++)
803      if (cvalue <= utf8_table1[i]) break;
804    utf8bytes += i;
805    for (j = i; j > 0; j--)
806     {
807     *utf8bytes-- = 0x80 | (cvalue & 0x3f);
808     cvalue >>= 6;
809     }
810    *utf8bytes = utf8_table2[i] | cvalue;
811    return i + 1;
812    }
813    
814    #endif
815    
816    
817    
818  /*************************************************  /*************************************************
# Line 211  chars without printing. */ Line 825  chars without printing. */
825    
826  static int pchars(unsigned char *p, int length, FILE *f)  static int pchars(unsigned char *p, int length, FILE *f)
827  {  {
828  int c;  int c = 0;
829  int yield = 0;  int yield = 0;
830    
831  while (length-- > 0)  while (length-- > 0)
832    {    {
833    #if !defined NOUTF8
834    if (use_utf8)    if (use_utf8)
835      {      {
836      int rc = utf82ord(p, &c);      int rc = utf82ord(p, &c);
# Line 224  while (length-- > 0) Line 839  while (length-- > 0)
839        {        {
840        length -= rc - 1;        length -= rc - 1;
841        p += rc;        p += rc;
842        if (c < 256 && isprint(c))        if (PRINTHEX(c))
843          {          {
844          if (f != NULL) fprintf(f, "%c", c);          if (f != NULL) fprintf(f, "%c", c);
845          yield++;          yield++;
846          }          }
847        else        else
848          {          {
849          int n;          int n = 4;
850          if (f != NULL) fprintf(f, "\\x{%02x}%n", c, &n);          if (f != NULL) fprintf(f, "\\x{%02x}", c);
851          yield += n;          yield += (n <= 0x000000ff)? 2 :
852                     (n <= 0x00000fff)? 3 :
853                     (n <= 0x0000ffff)? 4 :
854                     (n <= 0x000fffff)? 5 : 6;
855          }          }
856        continue;        continue;
857        }        }
858      }      }
859    #endif
860    
861     /* Not UTF-8, or malformed UTF-8  */     /* Not UTF-8, or malformed UTF-8  */
862    
863    if (isprint(c = *(p++)))    c = *p++;
864      if (PRINTHEX(c))
865      {      {
866      if (f != NULL) fprintf(f, "%c", c);      if (f != NULL) fprintf(f, "%c", c);
867      yield++;      yield++;
# Line 269  data is not zero. */ Line 889  data is not zero. */
889  static int callout(pcre_callout_block *cb)  static int callout(pcre_callout_block *cb)
890  {  {
891  FILE *f = (first_callout | callout_extra)? outfile : NULL;  FILE *f = (first_callout | callout_extra)? outfile : NULL;
892  int i, pre_start, post_start;  int i, pre_start, post_start, subject_length;
893    
894  if (callout_extra)  if (callout_extra)
895    {    {
# Line 300  pre_start = pchars((unsigned char *)cb-> Line 920  pre_start = pchars((unsigned char *)cb->
920  post_start = pchars((unsigned char *)(cb->subject + cb->start_match),  post_start = pchars((unsigned char *)(cb->subject + cb->start_match),
921    cb->current_position - cb->start_match, f);    cb->current_position - cb->start_match, f);
922    
923    subject_length = pchars((unsigned char *)cb->subject, cb->subject_length, NULL);
924    
925  (void)pchars((unsigned char *)(cb->subject + cb->current_position),  (void)pchars((unsigned char *)(cb->subject + cb->current_position),
926    cb->subject_length - cb->current_position, f);    cb->subject_length - cb->current_position, f);
927    
928  if (f != NULL) fprintf(f, "\n");  if (f != NULL) fprintf(f, "\n");
929    
930  /* Always print appropriate indicators, with callout number if not already  /* Always print appropriate indicators, with callout number if not already
931  shown */  shown. For automatic callouts, show the pattern offset. */
932    
933  if (callout_extra) fprintf(outfile, "    ");  if (cb->callout_number == 255)
934    else fprintf(outfile, "%3d ", cb->callout_number);    {
935      fprintf(outfile, "%+3d ", cb->pattern_position);
936      if (cb->pattern_position > 99) fprintf(outfile, "\n    ");
937      }
938    else
939      {
940      if (callout_extra) fprintf(outfile, "    ");
941        else fprintf(outfile, "%3d ", cb->callout_number);
942      }
943    
944  for (i = 0; i < pre_start; i++) fprintf(outfile, " ");  for (i = 0; i < pre_start; i++) fprintf(outfile, " ");
945  fprintf(outfile, "^");  fprintf(outfile, "^");
# Line 320  if (post_start > 0) Line 950  if (post_start > 0)
950    fprintf(outfile, "^");    fprintf(outfile, "^");
951    }    }
952    
953    for (i = 0; i < subject_length - pre_start - post_start + 4; i++)
954      fprintf(outfile, " ");
955    
956    fprintf(outfile, "%.*s", (cb->next_item_length == 0)? 1 : cb->next_item_length,
957      pbuffer + cb->pattern_position);
958    
959  fprintf(outfile, "\n");  fprintf(outfile, "\n");
960  first_callout = 0;  first_callout = 0;
961    
# Line 350  static void *new_malloc(size_t size) Line 986  static void *new_malloc(size_t size)
986  void *block = malloc(size);  void *block = malloc(size);
987  gotten_store = size;  gotten_store = size;
988  if (show_malloc)  if (show_malloc)
989    fprintf(outfile, "malloc       %3d %p\n", size, block);    fprintf(outfile, "malloc       %3d %p\n", (int)size, block);
990  return block;  return block;
991  }  }
992    
# Line 368  static void *stack_malloc(size_t size) Line 1004  static void *stack_malloc(size_t size)
1004  {  {
1005  void *block = malloc(size);  void *block = malloc(size);
1006  if (show_malloc)  if (show_malloc)
1007    fprintf(outfile, "stack_malloc %3d %p\n", size, block);    fprintf(outfile, "stack_malloc %3d %p\n", (int)size, block);
1008  return block;  return block;
1009  }  }
1010    
# Line 396  if ((rc = pcre_fullinfo(re, study, optio Line 1032  if ((rc = pcre_fullinfo(re, study, optio
1032    
1033    
1034  /*************************************************  /*************************************************
1035    *         Byte flipping function                 *
1036    *************************************************/
1037    
1038    static unsigned long int
1039    byteflip(unsigned long int value, int n)
1040    {
1041    if (n == 2) return ((value & 0x00ff) << 8) | ((value & 0xff00) >> 8);
1042    return ((value & 0x000000ff) << 24) |
1043           ((value & 0x0000ff00) <<  8) |
1044           ((value & 0x00ff0000) >>  8) |
1045           ((value & 0xff000000) >> 24);
1046    }
1047    
1048    
1049    
1050    
1051    /*************************************************
1052    *        Check match or recursion limit          *
1053    *************************************************/
1054    
1055    static int
1056    check_match_limit(pcre *re, pcre_extra *extra, uschar *bptr, int len,
1057      int start_offset, int options, int *use_offsets, int use_size_offsets,
1058      int flag, unsigned long int *limit, int errnumber, const char *msg)
1059    {
1060    int count;
1061    int min = 0;
1062    int mid = 64;
1063    int max = -1;
1064    
1065    extra->flags |= flag;
1066    
1067    for (;;)
1068      {
1069      *limit = mid;
1070    
1071      count = pcre_exec(re, extra, (char *)bptr, len, start_offset, options,
1072        use_offsets, use_size_offsets);
1073    
1074      if (count == errnumber)
1075        {
1076        /* fprintf(outfile, "Testing %s limit = %d\n", msg, mid); */
1077        min = mid;
1078        mid = (mid == max - 1)? max : (max > 0)? (min + max)/2 : mid*2;
1079        }
1080    
1081      else if (count >= 0 || count == PCRE_ERROR_NOMATCH ||
1082                             count == PCRE_ERROR_PARTIAL)
1083        {
1084        if (mid == min + 1)
1085          {
1086          fprintf(outfile, "Minimum %s limit = %d\n", msg, mid);
1087          break;
1088          }
1089        /* fprintf(outfile, "Testing %s limit = %d\n", msg, mid); */
1090        max = mid;
1091        mid = (min + mid)/2;
1092        }
1093      else break;    /* Some other error */
1094      }
1095    
1096    extra->flags &= ~flag;
1097    return count;
1098    }
1099    
1100    
1101    
1102    /*************************************************
1103    *         Case-independent strncmp() function    *
1104    *************************************************/
1105    
1106    /*
1107    Arguments:
1108      s         first string
1109      t         second string
1110      n         number of characters to compare
1111    
1112    Returns:    < 0, = 0, or > 0, according to the comparison
1113    */
1114    
1115    static int
1116    strncmpic(uschar *s, uschar *t, int n)
1117    {
1118    while (n--)
1119      {
1120      int c = tolower(*s++) - tolower(*t++);
1121      if (c) return c;
1122      }
1123    return 0;
1124    }
1125    
1126    
1127    
1128    /*************************************************
1129    *         Check newline indicator                *
1130    *************************************************/
1131    
1132    /* This is used both at compile and run-time to check for <xxx> escapes. Print
1133    a message and return 0 if there is no match.
1134    
1135    Arguments:
1136      p           points after the leading '<'
1137      f           file for error message
1138    
1139    Returns:      appropriate PCRE_NEWLINE_xxx flags, or 0
1140    */
1141    
1142    static int
1143    check_newline(uschar *p, FILE *f)
1144    {
1145    if (strncmpic(p, (uschar *)"cr>", 3) == 0) return PCRE_NEWLINE_CR;
1146    if (strncmpic(p, (uschar *)"lf>", 3) == 0) return PCRE_NEWLINE_LF;
1147    if (strncmpic(p, (uschar *)"crlf>", 5) == 0) return PCRE_NEWLINE_CRLF;
1148    if (strncmpic(p, (uschar *)"anycrlf>", 8) == 0) return PCRE_NEWLINE_ANYCRLF;
1149    if (strncmpic(p, (uschar *)"any>", 4) == 0) return PCRE_NEWLINE_ANY;
1150    if (strncmpic(p, (uschar *)"bsr_anycrlf>", 12) == 0) return PCRE_BSR_ANYCRLF;
1151    if (strncmpic(p, (uschar *)"bsr_unicode>", 12) == 0) return PCRE_BSR_UNICODE;
1152    fprintf(f, "Unknown newline type at: <%s\n", p);
1153    return 0;
1154    }
1155    
1156    
1157    
1158    /*************************************************
1159    *             Usage function                     *
1160    *************************************************/
1161    
1162    static void
1163    usage(void)
1164    {
1165    printf("Usage:     pcretest [options] [<input file> [<output file>]]\n\n");
1166    printf("Input and output default to stdin and stdout.\n");
1167    #ifdef SUPPORT_LIBREADLINE
1168    printf("If input is a terminal, readline() is used to read from it.\n");
1169    #else
1170    printf("This version of pcretest is not linked with readline().\n");
1171    #endif
1172    printf("\nOptions:\n");
1173    printf("  -b       show compiled code (bytecode)\n");
1174    printf("  -C       show PCRE compile-time options and exit\n");
1175    printf("  -d       debug: show compiled code and information (-b and -i)\n");
1176    #if !defined NODFA
1177    printf("  -dfa     force DFA matching for all subjects\n");
1178    #endif
1179    printf("  -help    show usage information\n");
1180    printf("  -i       show information about compiled patterns\n"
1181           "  -M       find MATCH_LIMIT minimum for each subject\n"
1182           "  -m       output memory used information\n"
1183           "  -o <n>   set size of offsets vector to <n>\n");
1184    #if !defined NOPOSIX
1185    printf("  -p       use POSIX interface\n");
1186    #endif
1187    printf("  -q       quiet: do not output PCRE version number at start\n");
1188    printf("  -S <n>   set stack size to <n> megabytes\n");
1189    printf("  -s       force each pattern to be studied\n"
1190           "  -t       time compilation and execution\n");
1191    printf("  -t <n>   time compilation and execution, repeating <n> times\n");
1192    printf("  -tm      time execution (matching) only\n");
1193    printf("  -tm <n>  time execution (matching) only, repeating <n> times\n");
1194    }
1195    
1196    
1197    
1198    /*************************************************
1199  *                Main Program                    *  *                Main Program                    *
1200  *************************************************/  *************************************************/
1201    
# Line 408  int main(int argc, char **argv) Line 1208  int main(int argc, char **argv)
1208  FILE *infile = stdin;  FILE *infile = stdin;
1209  int options = 0;  int options = 0;
1210  int study_options = 0;  int study_options = 0;
1211    int default_find_match_limit = FALSE;
1212  int op = 1;  int op = 1;
1213  int timeit = 0;  int timeit = 0;
1214    int timeitm = 0;
1215  int showinfo = 0;  int showinfo = 0;
1216  int showstore = 0;  int showstore = 0;
1217    int force_study = 0;
1218    int quiet = 0;
1219  int size_offsets = 45;  int size_offsets = 45;
1220  int size_offsets_max;  int size_offsets_max;
1221  int *offsets;  int *offsets = NULL;
1222  #if !defined NOPOSIX  #if !defined NOPOSIX
1223  int posix = 0;  int posix = 0;
1224  #endif  #endif
1225  int debug = 0;  int debug = 0;
1226  int done = 0;  int done = 0;
1227    int all_use_dfa = 0;
1228    int yield = 0;
1229    int stack_size;
1230    
1231    /* These vectors store, end-to-end, a list of captured substring names. Assume
1232    that 1024 is plenty long enough for the few names we'll be testing. */
1233    
1234  unsigned char *buffer;  uschar copynames[1024];
1235  unsigned char *dbuffer;  uschar getnames[1024];
1236    
1237    uschar *copynamesptr;
1238    uschar *getnamesptr;
1239    
1240  /* Get buffers from malloc() so that Electric Fence will check their misuse  /* Get buffers from malloc() so that Electric Fence will check their misuse
1241  when I am debugging. */  when I am debugging. They grow automatically when very long lines are read. */
1242    
1243  buffer = (unsigned char *)malloc(BUFFER_SIZE);  buffer = (unsigned char *)malloc(buffer_size);
1244  dbuffer = (unsigned char *)malloc(DBUFFER_SIZE);  dbuffer = (unsigned char *)malloc(buffer_size);
1245    pbuffer = (unsigned char *)malloc(buffer_size);
1246    
1247  /* Static so that new_malloc can use it. */  /* The outfile variable is static so that new_malloc can use it. */
1248    
1249  outfile = stdout;  outfile = stdout;
1250    
1251    /* The following  _setmode() stuff is some Windows magic that tells its runtime
1252    library to translate CRLF into a single LF character. At least, that's what
1253    I've been told: never having used Windows I take this all on trust. Originally
1254    it set 0x8000, but then I was advised that _O_BINARY was better. */
1255    
1256    #if defined(_WIN32) || defined(WIN32)
1257    _setmode( _fileno( stdout ), _O_BINARY );
1258    #endif
1259    
1260  /* Scan options */  /* Scan options */
1261    
1262  while (argc > 1 && argv[op][0] == '-')  while (argc > 1 && argv[op][0] == '-')
1263    {    {
1264    unsigned char *endptr;    unsigned char *endptr;
1265    
1266    if (strcmp(argv[op], "-s") == 0 || strcmp(argv[op], "-m") == 0)    if (strcmp(argv[op], "-m") == 0) showstore = 1;
1267      showstore = 1;    else if (strcmp(argv[op], "-s") == 0) force_study = 1;
1268    else if (strcmp(argv[op], "-t") == 0) timeit = 1;    else if (strcmp(argv[op], "-q") == 0) quiet = 1;
1269      else if (strcmp(argv[op], "-b") == 0) debug = 1;
1270    else if (strcmp(argv[op], "-i") == 0) showinfo = 1;    else if (strcmp(argv[op], "-i") == 0) showinfo = 1;
1271    else if (strcmp(argv[op], "-d") == 0) showinfo = debug = 1;    else if (strcmp(argv[op], "-d") == 0) showinfo = debug = 1;
1272      else if (strcmp(argv[op], "-M") == 0) default_find_match_limit = TRUE;
1273    #if !defined NODFA
1274      else if (strcmp(argv[op], "-dfa") == 0) all_use_dfa = 1;
1275    #endif
1276    else if (strcmp(argv[op], "-o") == 0 && argc > 2 &&    else if (strcmp(argv[op], "-o") == 0 && argc > 2 &&
1277        ((size_offsets = get_value((unsigned char *)argv[op+1], &endptr)),        ((size_offsets = get_value((unsigned char *)argv[op+1], &endptr)),
1278          *endptr == 0))          *endptr == 0))
# Line 452  while (argc > 1 && argv[op][0] == '-') Line 1280  while (argc > 1 && argv[op][0] == '-')
1280      op++;      op++;
1281      argc--;      argc--;
1282      }      }
1283      else if (strcmp(argv[op], "-t") == 0 || strcmp(argv[op], "-tm") == 0)
1284        {
1285        int both = argv[op][2] == 0;
1286        int temp;
1287        if (argc > 2 && (temp = get_value((unsigned char *)argv[op+1], &endptr),
1288                         *endptr == 0))
1289          {
1290          timeitm = temp;
1291          op++;
1292          argc--;
1293          }
1294        else timeitm = LOOPREPEAT;
1295        if (both) timeit = timeitm;
1296        }
1297      else if (strcmp(argv[op], "-S") == 0 && argc > 2 &&
1298          ((stack_size = get_value((unsigned char *)argv[op+1], &endptr)),
1299            *endptr == 0))
1300        {
1301    #if defined(_WIN32) || defined(WIN32)
1302        printf("PCRE: -S not supported on this OS\n");
1303        exit(1);
1304    #else
1305        int rc;
1306        struct rlimit rlim;
1307        getrlimit(RLIMIT_STACK, &rlim);
1308        rlim.rlim_cur = stack_size * 1024 * 1024;
1309        rc = setrlimit(RLIMIT_STACK, &rlim);
1310        if (rc != 0)
1311          {
1312        printf("PCRE: setrlimit() failed with error %d\n", rc);
1313        exit(1);
1314          }
1315        op++;
1316        argc--;
1317    #endif
1318        }
1319  #if !defined NOPOSIX  #if !defined NOPOSIX
1320    else if (strcmp(argv[op], "-p") == 0) posix = 1;    else if (strcmp(argv[op], "-p") == 0) posix = 1;
1321  #endif  #endif
1322    else if (strcmp(argv[op], "-C") == 0)    else if (strcmp(argv[op], "-C") == 0)
1323      {      {
1324      int rc;      int rc;
1325        unsigned long int lrc;
1326      printf("PCRE version %s\n", pcre_version());      printf("PCRE version %s\n", pcre_version());
1327      printf("Compiled with\n");      printf("Compiled with\n");
1328      (void)pcre_config(PCRE_CONFIG_UTF8, &rc);      (void)pcre_config(PCRE_CONFIG_UTF8, &rc);
1329      printf("  %sUTF-8 support\n", rc? "" : "No ");      printf("  %sUTF-8 support\n", rc? "" : "No ");
1330        (void)pcre_config(PCRE_CONFIG_UNICODE_PROPERTIES, &rc);
1331        printf("  %sUnicode properties support\n", rc? "" : "No ");
1332      (void)pcre_config(PCRE_CONFIG_NEWLINE, &rc);      (void)pcre_config(PCRE_CONFIG_NEWLINE, &rc);
1333      printf("  Newline character is %s\n", (rc == '\r')? "CR" : "LF");      /* Note that these values are always the ASCII values, even
1334        in EBCDIC environments. CR is 13 and NL is 10. */
1335        printf("  Newline sequence is %s\n", (rc == 13)? "CR" :
1336          (rc == 10)? "LF" : (rc == (13<<8 | 10))? "CRLF" :
1337          (rc == -2)? "ANYCRLF" :
1338          (rc == -1)? "ANY" : "???");
1339        (void)pcre_config(PCRE_CONFIG_BSR, &rc);
1340        printf("  \\R matches %s\n", rc? "CR, LF, or CRLF only" :
1341                                         "all Unicode newlines");
1342      (void)pcre_config(PCRE_CONFIG_LINK_SIZE, &rc);      (void)pcre_config(PCRE_CONFIG_LINK_SIZE, &rc);
1343      printf("  Internal link size = %d\n", rc);      printf("  Internal link size = %d\n", rc);
1344      (void)pcre_config(PCRE_CONFIG_POSIX_MALLOC_THRESHOLD, &rc);      (void)pcre_config(PCRE_CONFIG_POSIX_MALLOC_THRESHOLD, &rc);
1345      printf("  POSIX malloc threshold = %d\n", rc);      printf("  POSIX malloc threshold = %d\n", rc);
1346      (void)pcre_config(PCRE_CONFIG_MATCH_LIMIT, &rc);      (void)pcre_config(PCRE_CONFIG_MATCH_LIMIT, &lrc);
1347      printf("  Default match limit = %d\n", rc);      printf("  Default match limit = %ld\n", lrc);
1348        (void)pcre_config(PCRE_CONFIG_MATCH_LIMIT_RECURSION, &lrc);
1349        printf("  Default recursion depth limit = %ld\n", lrc);
1350      (void)pcre_config(PCRE_CONFIG_STACKRECURSE, &rc);      (void)pcre_config(PCRE_CONFIG_STACKRECURSE, &rc);
1351      printf("  Match recursion uses %s\n", rc? "stack" : "heap");      printf("  Match recursion uses %s\n", rc? "stack" : "heap");
1352      exit(0);      goto EXIT;
1353        }
1354      else if (strcmp(argv[op], "-help") == 0 ||
1355               strcmp(argv[op], "--help") == 0)
1356        {
1357        usage();
1358        goto EXIT;
1359      }      }
1360    else    else
1361      {      {
1362      printf("** Unknown or malformed option %s\n", argv[op]);      printf("** Unknown or malformed option %s\n", argv[op]);
1363      printf("Usage:   pcretest [-d] [-i] [-o <n>] [-p] [-s] [-t] [<input> [<output>]]\n");      usage();
1364      printf("  -C     show PCRE compile-time options and exit\n");      yield = 1;
1365      printf("  -d     debug: show compiled code; implies -i\n"      goto EXIT;
            "  -i     show information about compiled pattern\n"  
            "  -o <n> set size of offsets vector to <n>\n");  
 #if !defined NOPOSIX  
     printf("  -p     use POSIX interface\n");  
 #endif  
     printf("  -s     output store information\n"  
            "  -t     time compilation and execution\n");  
     return 1;  
1366      }      }
1367    op++;    op++;
1368    argc--;    argc--;
# Line 500  offsets = (int *)malloc(size_offsets_max Line 1375  offsets = (int *)malloc(size_offsets_max
1375  if (offsets == NULL)  if (offsets == NULL)
1376    {    {
1377    printf("** Failed to get %d bytes of memory for offsets vector\n",    printf("** Failed to get %d bytes of memory for offsets vector\n",
1378      size_offsets_max * sizeof(int));      (int)(size_offsets_max * sizeof(int)));
1379    return 1;    yield = 1;
1380      goto EXIT;
1381    }    }
1382    
1383  /* Sort out the input and output files */  /* Sort out the input and output files */
1384    
1385  if (argc > 1)  if (argc > 1)
1386    {    {
1387    infile = fopen(argv[op], "r");    infile = fopen(argv[op], INPUT_MODE);
1388    if (infile == NULL)    if (infile == NULL)
1389      {      {
1390      printf("** Failed to open %s\n", argv[op]);      printf("** Failed to open %s\n", argv[op]);
1391      return 1;      yield = 1;
1392        goto EXIT;
1393      }      }
1394    }    }
1395    
1396  if (argc > 2)  if (argc > 2)
1397    {    {
1398    outfile = fopen(argv[op+1], "w");    outfile = fopen(argv[op+1], OUTPUT_MODE);
1399    if (outfile == NULL)    if (outfile == NULL)
1400      {      {
1401      printf("** Failed to open %s\n", argv[op+1]);      printf("** Failed to open %s\n", argv[op+1]);
1402      return 1;      yield = 1;
1403        goto EXIT;
1404      }      }
1405    }    }
1406    
# Line 533  pcre_free = new_free; Line 1411  pcre_free = new_free;
1411  pcre_stack_malloc = stack_malloc;  pcre_stack_malloc = stack_malloc;
1412  pcre_stack_free = stack_free;  pcre_stack_free = stack_free;
1413    
1414  /* Heading line, then prompt for first regex if stdin */  /* Heading line unless quiet, then prompt for first regex if stdin */
1415    
1416  fprintf(outfile, "PCRE version %s\n\n", pcre_version());  if (!quiet) fprintf(outfile, "PCRE version %s\n\n", pcre_version());
1417    
1418  /* Main loop */  /* Main loop */
1419    
# Line 550  while (!done) Line 1428  while (!done)
1428  #endif  #endif
1429    
1430    const char *error;    const char *error;
1431      unsigned char *markptr;
1432    unsigned char *p, *pp, *ppp;    unsigned char *p, *pp, *ppp;
1433      unsigned char *to_file = NULL;
1434    const unsigned char *tables = NULL;    const unsigned char *tables = NULL;
1435      unsigned long int true_size, true_study_size = 0;
1436      size_t size, regex_gotten_store;
1437      int do_allcaps = 0;
1438      int do_mark = 0;
1439    int do_study = 0;    int do_study = 0;
1440      int no_force_study = 0;
1441    int do_debug = debug;    int do_debug = debug;
1442    int do_G = 0;    int do_G = 0;
1443    int do_g = 0;    int do_g = 0;
1444    int do_showinfo = showinfo;    int do_showinfo = showinfo;
1445    int do_showrest = 0;    int do_showrest = 0;
1446    int erroroffset, len, delimiter;    int do_showcaprest = 0;
1447      int do_flip = 0;
1448      int erroroffset, len, delimiter, poffset;
1449    
1450    use_utf8 = 0;    use_utf8 = 0;
1451      debug_lengths = 1;
1452    
1453    if (infile == stdin) printf("  re> ");    if (extend_inputline(infile, buffer, "  re> ") == NULL) break;
   if (fgets((char *)buffer, BUFFER_SIZE, infile) == NULL) break;  
1454    if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);    if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
1455    fflush(outfile);    fflush(outfile);
1456    
# Line 571  while (!done) Line 1458  while (!done)
1458    while (isspace(*p)) p++;    while (isspace(*p)) p++;
1459    if (*p == 0) continue;    if (*p == 0) continue;
1460    
1461    /* Get the delimiter and seek the end of the pattern; if is isn't    /* See if the pattern is to be loaded pre-compiled from a file. */
1462    complete, read more. */  
1463      if (*p == '<' && strchr((char *)(p+1), '<') == NULL)
1464        {
1465        unsigned long int magic, get_options;
1466        uschar sbuf[8];
1467        FILE *f;
1468    
1469        p++;
1470        pp = p + (int)strlen((char *)p);
1471        while (isspace(pp[-1])) pp--;
1472        *pp = 0;
1473    
1474        f = fopen((char *)p, "rb");
1475        if (f == NULL)
1476          {
1477          fprintf(outfile, "Failed to open %s: %s\n", p, strerror(errno));
1478          continue;
1479          }
1480    
1481        if (fread(sbuf, 1, 8, f) != 8) goto FAIL_READ;
1482    
1483        true_size =
1484          (sbuf[0] << 24) | (sbuf[1] << 16) | (sbuf[2] << 8) | sbuf[3];
1485        true_study_size =
1486          (sbuf[4] << 24) | (sbuf[5] << 16) | (sbuf[6] << 8) | sbuf[7];
1487    
1488        re = (real_pcre *)new_malloc(true_size);
1489        regex_gotten_store = gotten_store;
1490    
1491        if (fread(re, 1, true_size, f) != true_size) goto FAIL_READ;
1492    
1493        magic = ((real_pcre *)re)->magic_number;
1494        if (magic != MAGIC_NUMBER)
1495          {
1496          if (byteflip(magic, sizeof(magic)) == MAGIC_NUMBER)
1497            {
1498            do_flip = 1;
1499            }
1500          else
1501            {
1502            fprintf(outfile, "Data in %s is not a compiled PCRE regex\n", p);
1503            fclose(f);
1504            continue;
1505            }
1506          }
1507    
1508        fprintf(outfile, "Compiled pattern%s loaded from %s\n",
1509          do_flip? " (byte-inverted)" : "", p);
1510    
1511        /* Need to know if UTF-8 for printing data strings */
1512    
1513        new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options);
1514        use_utf8 = (get_options & PCRE_UTF8) != 0;
1515    
1516        /* Now see if there is any following study data. */
1517    
1518        if (true_study_size != 0)
1519          {
1520          pcre_study_data *psd;
1521    
1522          extra = (pcre_extra *)new_malloc(sizeof(pcre_extra) + true_study_size);
1523          extra->flags = PCRE_EXTRA_STUDY_DATA;
1524    
1525          psd = (pcre_study_data *)(((char *)extra) + sizeof(pcre_extra));
1526          extra->study_data = psd;
1527    
1528          if (fread(psd, 1, true_study_size, f) != true_study_size)
1529            {
1530            FAIL_READ:
1531            fprintf(outfile, "Failed to read data from %s\n", p);
1532            if (extra != NULL) new_free(extra);
1533            if (re != NULL) new_free(re);
1534            fclose(f);
1535            continue;
1536            }
1537          fprintf(outfile, "Study data loaded from %s\n", p);
1538          do_study = 1;     /* To get the data output if requested */
1539          }
1540        else fprintf(outfile, "No study data\n");
1541    
1542        fclose(f);
1543        goto SHOW_INFO;
1544        }
1545    
1546      /* In-line pattern (the usual case). Get the delimiter and seek the end of
1547      the pattern; if is isn't complete, read more. */
1548    
1549    delimiter = *p++;    delimiter = *p++;
1550    
1551    if (isalnum(delimiter) || delimiter == '\\')    if (isalnum(delimiter) || delimiter == '\\')
1552      {      {
1553      fprintf(outfile, "** Delimiter must not be alphameric or \\\n");      fprintf(outfile, "** Delimiter must not be alphanumeric or \\\n");
1554      goto SKIP_DATA;      goto SKIP_DATA;
1555      }      }
1556    
1557    pp = p;    pp = p;
1558      poffset = (int)(p - buffer);
1559    
1560    for(;;)    for(;;)
1561      {      {
# Line 593  while (!done) Line 1566  while (!done)
1566        pp++;        pp++;
1567        }        }
1568      if (*pp != 0) break;      if (*pp != 0) break;
1569        if ((pp = extend_inputline(infile, pp, "    > ")) == NULL)
     len = BUFFER_SIZE - (pp - buffer);  
     if (len < 256)  
       {  
       fprintf(outfile, "** Expression too long - missing delimiter?\n");  
       goto SKIP_DATA;  
       }  
   
     if (infile == stdin) printf("    > ");  
     if (fgets((char *)pp, len, infile) == NULL)  
1570        {        {
1571        fprintf(outfile, "** Unexpected EOF\n");        fprintf(outfile, "** Unexpected EOF\n");
1572        done = 1;        done = 1;
# Line 611  while (!done) Line 1575  while (!done)
1575      if (infile != stdin) fprintf(outfile, "%s", (char *)pp);      if (infile != stdin) fprintf(outfile, "%s", (char *)pp);
1576      }      }
1577    
1578      /* The buffer may have moved while being extended; reset the start of data
1579      pointer to the correct relative point in the buffer. */
1580    
1581      p = buffer + poffset;
1582    
1583    /* If the first character after the delimiter is backslash, make    /* If the first character after the delimiter is backslash, make
1584    the pattern end with backslash. This is purely to provide a way    the pattern end with backslash. This is purely to provide a way
1585    of testing for the error message when a pattern ends with backslash. */    of testing for the error message when a pattern ends with backslash. */
1586    
1587    if (pp[1] == '\\') *pp++ = '\\';    if (pp[1] == '\\') *pp++ = '\\';
1588    
1589    /* Terminate the pattern at the delimiter */    /* Terminate the pattern at the delimiter, and save a copy of the pattern
1590      for callouts. */
1591    
1592    *pp++ = 0;    *pp++ = 0;
1593      strcpy((char *)pbuffer, (char *)p);
1594    
1595    /* Look for options after final delimiter */    /* Look for options after final delimiter */
1596    
# Line 631  while (!done) Line 1602  while (!done)
1602      {      {
1603      switch (*pp++)      switch (*pp++)
1604        {        {
1605          case 'f': options |= PCRE_FIRSTLINE; break;
1606        case 'g': do_g = 1; break;        case 'g': do_g = 1; break;
1607        case 'i': options |= PCRE_CASELESS; break;        case 'i': options |= PCRE_CASELESS; break;
1608        case 'm': options |= PCRE_MULTILINE; break;        case 'm': options |= PCRE_MULTILINE; break;
1609        case 's': options |= PCRE_DOTALL; break;        case 's': options |= PCRE_DOTALL; break;
1610        case 'x': options |= PCRE_EXTENDED; break;        case 'x': options |= PCRE_EXTENDED; break;
1611    
1612        case '+': do_showrest = 1; break;        case '+':
1613          if (do_showrest) do_showcaprest = 1; else do_showrest = 1;
1614          break;
1615    
1616          case '=': do_allcaps = 1; break;
1617        case 'A': options |= PCRE_ANCHORED; break;        case 'A': options |= PCRE_ANCHORED; break;
1618          case 'B': do_debug = 1; break;
1619          case 'C': options |= PCRE_AUTO_CALLOUT; break;
1620        case 'D': do_debug = do_showinfo = 1; break;        case 'D': do_debug = do_showinfo = 1; break;
1621        case 'E': options |= PCRE_DOLLAR_ENDONLY; break;        case 'E': options |= PCRE_DOLLAR_ENDONLY; break;
1622          case 'F': do_flip = 1; break;
1623        case 'G': do_G = 1; break;        case 'G': do_G = 1; break;
1624        case 'I': do_showinfo = 1; break;        case 'I': do_showinfo = 1; break;
1625          case 'J': options |= PCRE_DUPNAMES; break;
1626          case 'K': do_mark = 1; break;
1627        case 'M': log_store = 1; break;        case 'M': log_store = 1; break;
1628        case 'N': options |= PCRE_NO_AUTO_CAPTURE; break;        case 'N': options |= PCRE_NO_AUTO_CAPTURE; break;
1629    
# Line 650  while (!done) Line 1631  while (!done)
1631        case 'P': do_posix = 1; break;        case 'P': do_posix = 1; break;
1632  #endif  #endif
1633    
1634        case 'S': do_study = 1; break;        case 'S':
1635          if (do_study == 0) do_study = 1; else
1636            {
1637            do_study = 0;
1638            no_force_study = 1;
1639            }
1640          break;
1641    
1642        case 'U': options |= PCRE_UNGREEDY; break;        case 'U': options |= PCRE_UNGREEDY; break;
1643          case 'W': options |= PCRE_UCP; break;
1644        case 'X': options |= PCRE_EXTRA; break;        case 'X': options |= PCRE_EXTRA; break;
1645          case 'Y': options |= PCRE_NO_START_OPTIMISE; break;
1646          case 'Z': debug_lengths = 0; break;
1647        case '8': options |= PCRE_UTF8; use_utf8 = 1; break;        case '8': options |= PCRE_UTF8; use_utf8 = 1; break;
1648        case '?': options |= PCRE_NO_UTF8_CHECK; break;        case '?': options |= PCRE_NO_UTF8_CHECK; break;
1649    
1650          case 'T':
1651          switch (*pp++)
1652            {
1653            case '0': tables = tables0; break;
1654            case '1': tables = tables1; break;
1655    
1656            case '\r':
1657            case '\n':
1658            case ' ':
1659            case 0:
1660            fprintf(outfile, "** Missing table number after /T\n");
1661            goto SKIP_DATA;
1662    
1663            default:
1664            fprintf(outfile, "** Bad table number \"%c\" after /T\n", pp[-1]);
1665            goto SKIP_DATA;
1666            }
1667          break;
1668    
1669        case 'L':        case 'L':
1670        ppp = pp;        ppp = pp;
1671        while (*ppp != '\n' && *ppp != ' ') ppp++;        /* The '\r' test here is so that it works on Windows. */
1672          /* The '0' test is just in case this is an unterminated line. */
1673          while (*ppp != 0 && *ppp != '\n' && *ppp != '\r' && *ppp != ' ') ppp++;
1674        *ppp = 0;        *ppp = 0;
1675        if (setlocale(LC_CTYPE, (const char *)pp) == NULL)        if (setlocale(LC_CTYPE, (const char *)pp) == NULL)
1676          {          {
1677          fprintf(outfile, "** Failed to set locale \"%s\"\n", pp);          fprintf(outfile, "** Failed to set locale \"%s\"\n", pp);
1678          goto SKIP_DATA;          goto SKIP_DATA;
1679          }          }
1680          locale_set = 1;
1681        tables = pcre_maketables();        tables = pcre_maketables();
1682        pp = ppp;        pp = ppp;
1683        break;        break;
1684    
1685        case '\n': case ' ': break;        case '>':
1686          to_file = pp;
1687          while (*pp != 0) pp++;
1688          while (isspace(pp[-1])) pp--;
1689          *pp = 0;
1690          break;
1691    
1692          case '<':
1693            {
1694            if (strncmpic(pp, (uschar *)"JS>", 3) == 0)
1695              {
1696              options |= PCRE_JAVASCRIPT_COMPAT;
1697              pp += 3;
1698              }
1699            else
1700              {
1701              int x = check_newline(pp, outfile);
1702              if (x == 0) goto SKIP_DATA;
1703              options |= x;
1704              while (*pp++ != '>');
1705              }
1706            }
1707          break;
1708    
1709          case '\r':                      /* So that it works in Windows */
1710          case '\n':
1711          case ' ':
1712          break;
1713    
1714        default:        default:
1715        fprintf(outfile, "** Unknown option '%c'\n", pp[-1]);        fprintf(outfile, "** Unknown option '%c'\n", pp[-1]);
1716        goto SKIP_DATA;        goto SKIP_DATA;
# Line 685  while (!done) Line 1726  while (!done)
1726      {      {
1727      int rc;      int rc;
1728      int cflags = 0;      int cflags = 0;
1729    
1730      if ((options & PCRE_CASELESS) != 0) cflags |= REG_ICASE;      if ((options & PCRE_CASELESS) != 0) cflags |= REG_ICASE;
1731      if ((options & PCRE_MULTILINE) != 0) cflags |= REG_NEWLINE;      if ((options & PCRE_MULTILINE) != 0) cflags |= REG_NEWLINE;
1732        if ((options & PCRE_DOTALL) != 0) cflags |= REG_DOTALL;
1733        if ((options & PCRE_NO_AUTO_CAPTURE) != 0) cflags |= REG_NOSUB;
1734        if ((options & PCRE_UTF8) != 0) cflags |= REG_UTF8;
1735        if ((options & PCRE_UCP) != 0) cflags |= REG_UCP;
1736        if ((options & PCRE_UNGREEDY) != 0) cflags |= REG_UNGREEDY;
1737    
1738      rc = regcomp(&preg, (char *)p, cflags);      rc = regcomp(&preg, (char *)p, cflags);
1739    
1740      /* Compilation failed; go back for another re, skipping to blank line      /* Compilation failed; go back for another re, skipping to blank line
# Line 694  while (!done) Line 1742  while (!done)
1742    
1743      if (rc != 0)      if (rc != 0)
1744        {        {
1745        (void)regerror(rc, &preg, (char *)buffer, BUFFER_SIZE);        (void)regerror(rc, &preg, (char *)buffer, buffer_size);
1746        fprintf(outfile, "Failed: POSIX code %d: %s\n", rc, buffer);        fprintf(outfile, "Failed: POSIX code %d: %s\n", rc, buffer);
1747        goto SKIP_DATA;        goto SKIP_DATA;
1748        }        }
# Line 706  while (!done) Line 1754  while (!done)
1754  #endif  /* !defined NOPOSIX */  #endif  /* !defined NOPOSIX */
1755    
1756      {      {
1757      if (timeit)      unsigned long int get_options;
1758    
1759        if (timeit > 0)
1760        {        {
1761        register int i;        register int i;
1762        clock_t time_taken;        clock_t time_taken;
1763        clock_t start_time = clock();        clock_t start_time = clock();
1764        for (i = 0; i < LOOPREPEAT; i++)        for (i = 0; i < timeit; i++)
1765            {
1766            re = pcre_compile((char *)p, options, &error, &erroroffset, tables);
1767            if (re != NULL) free(re);
1768            }
1769          time_taken = clock() - start_time;
1770          fprintf(outfile, "Compile time %.4f milliseconds\n",
1771            (((double)time_taken * 1000.0) / (double)timeit) /
1772              (double)CLOCKS_PER_SEC);
1773          }
1774    
1775        re = pcre_compile((char *)p, options, &error, &erroroffset, tables);
1776    
1777        /* Compilation failed; go back for another re, skipping to blank line
1778        if non-interactive. */
1779    
1780        if (re == NULL)
1781          {
1782          fprintf(outfile, "Failed: %s at offset %d\n", error, erroroffset);
1783          SKIP_DATA:
1784          if (infile != stdin)
1785            {
1786            for (;;)
1787              {
1788              if (extend_inputline(infile, buffer, NULL) == NULL)
1789                {
1790                done = 1;
1791                goto CONTINUE;
1792                }
1793              len = (int)strlen((char *)buffer);
1794              while (len > 0 && isspace(buffer[len-1])) len--;
1795              if (len == 0) break;
1796              }
1797            fprintf(outfile, "\n");
1798            }
1799          goto CONTINUE;
1800          }
1801    
1802        /* Compilation succeeded. It is now possible to set the UTF-8 option from
1803        within the regex; check for this so that we know how to process the data
1804        lines. */
1805    
1806        new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options);
1807        if ((get_options & PCRE_UTF8) != 0) use_utf8 = 1;
1808    
1809        /* Print information if required. There are now two info-returning
1810        functions. The old one has a limited interface and returns only limited
1811        data. Check that it agrees with the newer one. */
1812    
1813        if (log_store)
1814          fprintf(outfile, "Memory allocation (code space): %d\n",
1815            (int)(gotten_store -
1816                  sizeof(real_pcre) -
1817                  ((real_pcre *)re)->name_count * ((real_pcre *)re)->name_entry_size));
1818    
1819        /* Extract the size for possible writing before possibly flipping it,
1820        and remember the store that was got. */
1821    
1822        true_size = ((real_pcre *)re)->size;
1823        regex_gotten_store = gotten_store;
1824    
1825        /* If -s or /S was present, study the regex to generate additional info to
1826        help with the matching, unless the pattern has the SS option, which
1827        suppresses the effect of /S (used for a few test patterns where studying is
1828        never sensible). */
1829    
1830        if (do_study || (force_study && !no_force_study))
1831          {
1832          if (timeit > 0)
1833            {
1834            register int i;
1835            clock_t time_taken;
1836            clock_t start_time = clock();
1837            for (i = 0; i < timeit; i++)
1838              extra = pcre_study(re, study_options, &error);
1839            time_taken = clock() - start_time;
1840            if (extra != NULL) free(extra);
1841            fprintf(outfile, "  Study time %.4f milliseconds\n",
1842              (((double)time_taken * 1000.0) / (double)timeit) /
1843                (double)CLOCKS_PER_SEC);
1844            }
1845          extra = pcre_study(re, study_options, &error);
1846          if (error != NULL)
1847            fprintf(outfile, "Failed to study: %s\n", error);
1848          else if (extra != NULL)
1849            true_study_size = ((pcre_study_data *)(extra->study_data))->size;
1850          }
1851    
1852        /* If /K was present, we set up for handling MARK data. */
1853    
1854        if (do_mark)
1855          {
1856          if (extra == NULL)
1857          {          {
1858          re = pcre_compile((char *)p, options, &error, &erroroffset, tables);          extra = (pcre_extra *)malloc(sizeof(pcre_extra));
1859          if (re != NULL) free(re);          extra->flags = 0;
1860          }          }
1861        time_taken = clock() - start_time;        extra->mark = &markptr;
1862        fprintf(outfile, "Compile time %.3f milliseconds\n",        extra->flags |= PCRE_EXTRA_MARK;
         (((double)time_taken * 1000.0) / (double)LOOPREPEAT) /  
           (double)CLOCKS_PER_SEC);  
1863        }        }
1864    
1865      re = pcre_compile((char *)p, options, &error, &erroroffset, tables);      /* If the 'F' option was present, we flip the bytes of all the integer
1866        fields in the regex data block and the study block. This is to make it
1867      /* Compilation failed; go back for another re, skipping to blank line      possible to test PCRE's handling of byte-flipped patterns, e.g. those
1868      if non-interactive. */      compiled on a different architecture. */
1869    
1870      if (re == NULL)      if (do_flip)
1871        {        {
1872        fprintf(outfile, "Failed: %s at offset %d\n", error, erroroffset);        real_pcre *rre = (real_pcre *)re;
1873        SKIP_DATA:        rre->magic_number =
1874        if (infile != stdin)          byteflip(rre->magic_number, sizeof(rre->magic_number));
1875          {        rre->size = byteflip(rre->size, sizeof(rre->size));
1876          for (;;)        rre->options = byteflip(rre->options, sizeof(rre->options));
1877            {        rre->flags = (pcre_uint16)byteflip(rre->flags, sizeof(rre->flags));
1878            if (fgets((char *)buffer, BUFFER_SIZE, infile) == NULL)        rre->top_bracket =
1879              {          (pcre_uint16)byteflip(rre->top_bracket, sizeof(rre->top_bracket));
1880              done = 1;        rre->top_backref =
1881              goto CONTINUE;          (pcre_uint16)byteflip(rre->top_backref, sizeof(rre->top_backref));
1882              }        rre->first_byte =
1883            len = (int)strlen((char *)buffer);          (pcre_uint16)byteflip(rre->first_byte, sizeof(rre->first_byte));
1884            while (len > 0 && isspace(buffer[len-1])) len--;        rre->req_byte =
1885            if (len == 0) break;          (pcre_uint16)byteflip(rre->req_byte, sizeof(rre->req_byte));
1886            }        rre->name_table_offset = (pcre_uint16)byteflip(rre->name_table_offset,
1887          fprintf(outfile, "\n");          sizeof(rre->name_table_offset));
1888          rre->name_entry_size = (pcre_uint16)byteflip(rre->name_entry_size,
1889            sizeof(rre->name_entry_size));
1890          rre->name_count = (pcre_uint16)byteflip(rre->name_count,
1891            sizeof(rre->name_count));
1892    
1893          if (extra != NULL)
1894            {
1895            pcre_study_data *rsd = (pcre_study_data *)(extra->study_data);
1896            rsd->size = byteflip(rsd->size, sizeof(rsd->size));
1897            rsd->flags = byteflip(rsd->flags, sizeof(rsd->flags));
1898            rsd->minlength = byteflip(rsd->minlength, sizeof(rsd->minlength));
1899          }          }
       goto CONTINUE;  
1900        }        }
1901    
1902      /* Compilation succeeded; print data if required. There are now two      /* Extract information from the compiled data if required */
     info-returning functions. The old one has a limited interface and  
     returns only limited data. Check that it agrees with the newer one. */  
1903    
1904      if (log_store)      SHOW_INFO:
1905        fprintf(outfile, "Memory allocation (code space): %d\n",  
1906          (int)(gotten_store -      if (do_debug)
1907                sizeof(real_pcre) -        {
1908                ((real_pcre *)re)->name_count * ((real_pcre *)re)->name_entry_size));        fprintf(outfile, "------------------------------------------------------------------\n");
1909          pcre_printint(re, outfile, debug_lengths);
1910          }
1911    
1912        /* We already have the options in get_options (see above) */
1913    
1914      if (do_showinfo)      if (do_showinfo)
1915        {        {
1916        unsigned long int get_options;        unsigned long int all_options;
1917    #if !defined NOINFOCHECK
1918        int old_first_char, old_options, old_count;        int old_first_char, old_options, old_count;
1919        int count, backrefmax, first_char, need_char;  #endif
1920          int count, backrefmax, first_char, need_char, okpartial, jchanged,
1921            hascrorlf;
1922        int nameentrysize, namecount;        int nameentrysize, namecount;
1923        const uschar *nametable;        const uschar *nametable;
       size_t size;  
   
       if (do_debug)  
         {  
         fprintf(outfile, "------------------------------------------------------------------\n");  
         print_internals(re, outfile);  
         }  
1924    
       new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options);  
1925        new_info(re, NULL, PCRE_INFO_SIZE, &size);        new_info(re, NULL, PCRE_INFO_SIZE, &size);
1926        new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count);        new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count);
1927        new_info(re, NULL, PCRE_INFO_BACKREFMAX, &backrefmax);        new_info(re, NULL, PCRE_INFO_BACKREFMAX, &backrefmax);
# Line 783  while (!done) Line 1930  while (!done)
1930        new_info(re, NULL, PCRE_INFO_NAMEENTRYSIZE, &nameentrysize);        new_info(re, NULL, PCRE_INFO_NAMEENTRYSIZE, &nameentrysize);
1931        new_info(re, NULL, PCRE_INFO_NAMECOUNT, &namecount);        new_info(re, NULL, PCRE_INFO_NAMECOUNT, &namecount);
1932        new_info(re, NULL, PCRE_INFO_NAMETABLE, (void *)&nametable);        new_info(re, NULL, PCRE_INFO_NAMETABLE, (void *)&nametable);
1933          new_info(re, NULL, PCRE_INFO_OKPARTIAL, &okpartial);
1934          new_info(re, NULL, PCRE_INFO_JCHANGED, &jchanged);
1935          new_info(re, NULL, PCRE_INFO_HASCRORLF, &hascrorlf);
1936    
1937    #if !defined NOINFOCHECK
1938        old_count = pcre_info(re, &old_options, &old_first_char);        old_count = pcre_info(re, &old_options, &old_first_char);
1939        if (count < 0) fprintf(outfile,        if (count < 0) fprintf(outfile,
1940          "Error %d from pcre_info()\n", count);          "Error %d from pcre_info()\n", count);
# Line 801  while (!done) Line 1952  while (!done)
1952            "Options disagreement: pcre_fullinfo=%ld pcre_info=%d\n",            "Options disagreement: pcre_fullinfo=%ld pcre_info=%d\n",
1953              get_options, old_options);              get_options, old_options);
1954          }          }
1955    #endif
1956    
1957        if (size != gotten_store) fprintf(outfile,        if (size != regex_gotten_store) fprintf(outfile,
1958          "Size disagreement: pcre_fullinfo=%d call to malloc for %d\n",          "Size disagreement: pcre_fullinfo=%d call to malloc for %d\n",
1959          size, gotten_store);          (int)size, (int)regex_gotten_store);
1960    
1961        fprintf(outfile, "Capturing subpattern count = %d\n", count);        fprintf(outfile, "Capturing subpattern count = %d\n", count);
1962        if (backrefmax > 0)        if (backrefmax > 0)
# Line 822  while (!done) Line 1974  while (!done)
1974            }            }
1975          }          }
1976    
1977          if (!okpartial) fprintf(outfile, "Partial matching not supported\n");
1978          if (hascrorlf) fprintf(outfile, "Contains explicit CR or LF match\n");
1979    
1980          all_options = ((real_pcre *)re)->options;
1981          if (do_flip) all_options = byteflip(all_options, sizeof(all_options));
1982    
1983        if (get_options == 0) fprintf(outfile, "No options\n");        if (get_options == 0) fprintf(outfile, "No options\n");
1984          else fprintf(outfile, "Options:%s%s%s%s%s%s%s%s%s%s\n",          else fprintf(outfile, "Options:%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
1985            ((get_options & PCRE_ANCHORED) != 0)? " anchored" : "",            ((get_options & PCRE_ANCHORED) != 0)? " anchored" : "",
1986            ((get_options & PCRE_CASELESS) != 0)? " caseless" : "",            ((get_options & PCRE_CASELESS) != 0)? " caseless" : "",
1987            ((get_options & PCRE_EXTENDED) != 0)? " extended" : "",            ((get_options & PCRE_EXTENDED) != 0)? " extended" : "",
1988            ((get_options & PCRE_MULTILINE) != 0)? " multiline" : "",            ((get_options & PCRE_MULTILINE) != 0)? " multiline" : "",
1989              ((get_options & PCRE_FIRSTLINE) != 0)? " firstline" : "",
1990            ((get_options & PCRE_DOTALL) != 0)? " dotall" : "",            ((get_options & PCRE_DOTALL) != 0)? " dotall" : "",
1991              ((get_options & PCRE_BSR_ANYCRLF) != 0)? " bsr_anycrlf" : "",
1992              ((get_options & PCRE_BSR_UNICODE) != 0)? " bsr_unicode" : "",
1993            ((get_options & PCRE_DOLLAR_ENDONLY) != 0)? " dollar_endonly" : "",            ((get_options & PCRE_DOLLAR_ENDONLY) != 0)? " dollar_endonly" : "",
1994            ((get_options & PCRE_EXTRA) != 0)? " extra" : "",            ((get_options & PCRE_EXTRA) != 0)? " extra" : "",
1995            ((get_options & PCRE_UNGREEDY) != 0)? " ungreedy" : "",            ((get_options & PCRE_UNGREEDY) != 0)? " ungreedy" : "",
1996              ((get_options & PCRE_NO_AUTO_CAPTURE) != 0)? " no_auto_capture" : "",
1997            ((get_options & PCRE_UTF8) != 0)? " utf8" : "",            ((get_options & PCRE_UTF8) != 0)? " utf8" : "",
1998            ((get_options & PCRE_NO_UTF8_CHECK) != 0)? " no_utf8_check" : "");            ((get_options & PCRE_UCP) != 0)? " ucp" : "",
1999              ((get_options & PCRE_NO_UTF8_CHECK) != 0)? " no_utf8_check" : "",
2000              ((get_options & PCRE_NO_START_OPTIMIZE) != 0)? " no_start_optimize" : "",
2001              ((get_options & PCRE_DUPNAMES) != 0)? " dupnames" : "");
2002    
2003          if (jchanged) fprintf(outfile, "Duplicate name status changes\n");
2004    
2005          switch (get_options & PCRE_NEWLINE_BITS)
2006            {
2007            case PCRE_NEWLINE_CR:
2008            fprintf(outfile, "Forced newline sequence: CR\n");
2009            break;
2010    
2011            case PCRE_NEWLINE_LF:
2012            fprintf(outfile, "Forced newline sequence: LF\n");
2013            break;
2014    
2015            case PCRE_NEWLINE_CRLF:
2016            fprintf(outfile, "Forced newline sequence: CRLF\n");
2017            break;
2018    
2019            case PCRE_NEWLINE_ANYCRLF:
2020            fprintf(outfile, "Forced newline sequence: ANYCRLF\n");
2021            break;
2022    
2023            case PCRE_NEWLINE_ANY:
2024            fprintf(outfile, "Forced newline sequence: ANY\n");
2025            break;
2026    
2027        if (((((real_pcre *)re)->options) & PCRE_ICHANGED) != 0)          default:
2028          fprintf(outfile, "Case state changes\n");          break;
2029            }
2030    
2031        if (first_char == -1)        if (first_char == -1)
2032          {          {
2033          fprintf(outfile, "First char at start or follows \\n\n");          fprintf(outfile, "First char at start or follows newline\n");
2034          }          }
2035        else if (first_char < 0)        else if (first_char < 0)
2036          {          {
# Line 851  while (!done) Line 2041  while (!done)
2041          int ch = first_char & 255;          int ch = first_char & 255;
2042          const char *caseless = ((first_char & REQ_CASELESS) == 0)?          const char *caseless = ((first_char & REQ_CASELESS) == 0)?
2043            "" : " (caseless)";            "" : " (caseless)";
2044          if (isprint(ch))          if (PRINTHEX(ch))
2045            fprintf(outfile, "First char = \'%c\'%s\n", ch, caseless);            fprintf(outfile, "First char = \'%c\'%s\n", ch, caseless);
2046          else          else
2047            fprintf(outfile, "First char = %d%s\n", ch, caseless);            fprintf(outfile, "First char = %d%s\n", ch, caseless);
# Line 866  while (!done) Line 2056  while (!done)
2056          int ch = need_char & 255;          int ch = need_char & 255;
2057          const char *caseless = ((need_char & REQ_CASELESS) == 0)?          const char *caseless = ((need_char & REQ_CASELESS) == 0)?
2058            "" : " (caseless)";            "" : " (caseless)";
2059          if (isprint(ch))          if (PRINTHEX(ch))
2060            fprintf(outfile, "Need char = \'%c\'%s\n", ch, caseless);            fprintf(outfile, "Need char = \'%c\'%s\n", ch, caseless);
2061          else          else
2062            fprintf(outfile, "Need char = %d%s\n", ch, caseless);            fprintf(outfile, "Need char = %d%s\n", ch, caseless);
2063          }          }
       }  
   
     /* If /S was present, study the regexp to generate additional info to  
     help with the matching. */  
   
     if (do_study)  
       {  
       if (timeit)  
         {  
         register int i;  
         clock_t time_taken;  
         clock_t start_time = clock();  
         for (i = 0; i < LOOPREPEAT; i++)  
           extra = pcre_study(re, study_options, &error);  
         time_taken = clock() - start_time;  
         if (extra != NULL) free(extra);  
         fprintf(outfile, "  Study time %.3f milliseconds\n",  
           (((double)time_taken * 1000.0) / (double)LOOPREPEAT) /  
             (double)CLOCKS_PER_SEC);  
         }  
   
       extra = pcre_study(re, study_options, &error);  
       if (error != NULL)  
         fprintf(outfile, "Failed to study: %s\n", error);  
       else if (extra == NULL)  
         fprintf(outfile, "Study returned NULL\n");  
2064    
2065        /* Don't output study size; at present it is in any case a fixed        /* Don't output study size; at present it is in any case a fixed
2066        value, but it varies, depending on the computer architecture, and        value, but it varies, depending on the computer architecture, and
2067        so messes up the test suite. */        so messes up the test suite. (And with the /F option, it might be
2068          flipped.) If study was forced by an external -s, don't show this
2069          information unless -i or -d was also present. This means that, except
2070          when auto-callouts are involved, the output from runs with and without
2071          -s should be identical. */
2072    
2073        else if (do_showinfo)        if (do_study || (force_study && showinfo && !no_force_study))
2074          {          {
2075          size_t size;          if (extra == NULL)
2076          uschar *start_bits = NULL;            fprintf(outfile, "Study returned NULL\n");
         new_info(re, extra, PCRE_INFO_STUDYSIZE, &size);  
         new_info(re, extra, PCRE_INFO_FIRSTTABLE, &start_bits);  
         /* fprintf(outfile, "Study size = %d\n", size); */  
         if (start_bits == NULL)  
           fprintf(outfile, "No starting character set\n");  
2077          else          else
2078            {            {
2079            int i;            uschar *start_bits = NULL;
2080            int c = 24;            int minlength;
2081            fprintf(outfile, "Starting character set: ");  
2082            for (i = 0; i < 256; i++)            new_info(re, extra, PCRE_INFO_MINLENGTH, &minlength);
2083              fprintf(outfile, "Subject length lower bound = %d\n", minlength);
2084    
2085              new_info(re, extra, PCRE_INFO_FIRSTTABLE, &start_bits);
2086              if (start_bits == NULL)
2087                fprintf(outfile, "No set of starting bytes\n");
2088              else
2089              {              {
2090              if ((start_bits[i/8] & (1<<(i%8))) != 0)              int i;
2091                int c = 24;
2092                fprintf(outfile, "Starting byte set: ");
2093                for (i = 0; i < 256; i++)
2094                {                {
2095                if (c > 75)                if ((start_bits[i/8] & (1<<(i&7))) != 0)
                 {  
                 fprintf(outfile, "\n  ");  
                 c = 2;  
                 }  
               if (isprint(i) && i != ' ')  
                 {  
                 fprintf(outfile, "%c ", i);  
                 c += 2;  
                 }  
               else  
2096                  {                  {
2097                  fprintf(outfile, "\\x%02x ", i);                  if (c > 75)
2098                  c += 5;                    {
2099                      fprintf(outfile, "\n  ");
2100                      c = 2;
2101                      }
2102                    if (PRINTHEX(i) && i != ' ')
2103                      {
2104                      fprintf(outfile, "%c ", i);
2105                      c += 2;
2106                      }
2107                    else
2108                      {
2109                      fprintf(outfile, "\\x%02x ", i);
2110                      c += 5;
2111                      }
2112                  }                  }
2113                }                }
2114                fprintf(outfile, "\n");
2115              }              }
           fprintf(outfile, "\n");  
2116            }            }
2117          }          }
2118        }        }
2119      }  
2120        /* If the '>' option was present, we write out the regex to a file, and
2121        that is all. The first 8 bytes of the file are the regex length and then
2122        the study length, in big-endian order. */
2123    
2124        if (to_file != NULL)
2125          {
2126          FILE *f = fopen((char *)to_file, "wb");
2127          if (f == NULL)
2128            {
2129            fprintf(outfile, "Unable to open %s: %s\n", to_file, strerror(errno));
2130            }
2131          else
2132            {
2133            uschar sbuf[8];
2134            sbuf[0] = (uschar)((true_size >> 24) & 255);
2135            sbuf[1] = (uschar)((true_size >> 16) & 255);
2136            sbuf[2] = (uschar)((true_size >>  8) & 255);
2137            sbuf[3] = (uschar)((true_size) & 255);
2138    
2139            sbuf[4] = (uschar)((true_study_size >> 24) & 255);
2140            sbuf[5] = (uschar)((true_study_size >> 16) & 255);
2141            sbuf[6] = (uschar)((true_study_size >>  8) & 255);
2142            sbuf[7] = (uschar)((true_study_size) & 255);
2143    
2144            if (fwrite(sbuf, 1, 8, f) < 8 ||
2145                fwrite(re, 1, true_size, f) < true_size)
2146              {
2147              fprintf(outfile, "Write error on %s: %s\n", to_file, strerror(errno));
2148              }
2149            else
2150              {
2151              fprintf(outfile, "Compiled pattern written to %s\n", to_file);
2152    
2153              /* If there is study data, write it, but verify the writing only
2154              if the studying was requested by /S, not just by -s. */
2155    
2156              if (extra != NULL)
2157                {
2158                if (fwrite(extra->study_data, 1, true_study_size, f) <
2159                    true_study_size)
2160                  {
2161                  fprintf(outfile, "Write error on %s: %s\n", to_file,
2162                    strerror(errno));
2163                  }
2164                else fprintf(outfile, "Study data written to %s\n", to_file);
2165                }
2166              }
2167            fclose(f);
2168            }
2169    
2170          new_free(re);
2171          if (extra != NULL) new_free(extra);
2172          if (locale_set)
2173            {
2174            new_free((void *)tables);
2175            setlocale(LC_CTYPE, "C");
2176            locale_set = 0;
2177            }
2178          continue;  /* With next regex */
2179          }
2180        }        /* End of non-POSIX compile */
2181    
2182    /* Read data lines and test them */    /* Read data lines and test them */
2183    
2184    for (;;)    for (;;)
2185      {      {
2186      unsigned char *q;      uschar *q;
2187      unsigned char *bptr = dbuffer;      uschar *bptr;
2188      int *use_offsets = offsets;      int *use_offsets = offsets;
2189      int use_size_offsets = size_offsets;      int use_size_offsets = size_offsets;
2190      int callout_data = 0;      int callout_data = 0;
2191      int callout_data_set = 0;      int callout_data_set = 0;
2192      int count, c;      int count, c;
2193      int copystrings = 0;      int copystrings = 0;
2194      int find_match_limit = 0;      int find_match_limit = default_find_match_limit;
2195      int getstrings = 0;      int getstrings = 0;
2196      int getlist = 0;      int getlist = 0;
2197      int gmatched = 0;      int gmatched = 0;
2198      int start_offset = 0;      int start_offset = 0;
2199        int start_offset_sign = 1;
2200      int g_notempty = 0;      int g_notempty = 0;
2201        int use_dfa = 0;
2202    
2203      options = 0;      options = 0;
2204    
2205        *copynames = 0;
2206        *getnames = 0;
2207    
2208        copynamesptr = copynames;
2209        getnamesptr = getnames;
2210    
2211      pcre_callout = callout;      pcre_callout = callout;
2212      first_callout = 1;      first_callout = 1;
2213      callout_extra = 0;      callout_extra = 0;
# Line 972  while (!done) Line 2216  while (!done)
2216      callout_fail_id = -1;      callout_fail_id = -1;
2217      show_malloc = 0;      show_malloc = 0;
2218    
2219      if (infile == stdin) printf("data> ");      if (extra != NULL) extra->flags &=
2220      if (fgets((char *)buffer, BUFFER_SIZE, infile) == NULL)        ~(PCRE_EXTRA_MATCH_LIMIT|PCRE_EXTRA_MATCH_LIMIT_RECURSION);
2221    
2222        len = 0;
2223        for (;;)
2224        {        {
2225        done = 1;        if (extend_inputline(infile, buffer + len, "data> ") == NULL)
2226        goto CONTINUE;          {
2227            if (len > 0)    /* Reached EOF without hitting a newline */
2228              {
2229              fprintf(outfile, "\n");
2230              break;
2231              }
2232            done = 1;
2233            goto CONTINUE;
2234            }
2235          if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
2236          len = (int)strlen((char *)buffer);
2237          if (buffer[len-1] == '\n') break;
2238        }        }
     if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);  
2239    
     len = (int)strlen((char *)buffer);  
2240      while (len > 0 && isspace(buffer[len-1])) len--;      while (len > 0 && isspace(buffer[len-1])) len--;
2241      buffer[len] = 0;      buffer[len] = 0;
2242      if (len == 0) break;      if (len == 0) break;
# Line 988  while (!done) Line 2244  while (!done)
2244      p = buffer;      p = buffer;
2245      while (isspace(*p)) p++;      while (isspace(*p)) p++;
2246    
2247      q = dbuffer;      bptr = q = dbuffer;
2248      while ((c = *p++) != 0)      while ((c = *p++) != 0)
2249        {        {
2250        int i = 0;        int i = 0;
# Line 1010  while (!done) Line 2266  while (!done)
2266          c -= '0';          c -= '0';
2267          while (i++ < 2 && isdigit(*p) && *p != '8' && *p != '9')          while (i++ < 2 && isdigit(*p) && *p != '8' && *p != '9')
2268            c = c * 8 + *p++ - '0';            c = c * 8 + *p++ - '0';
2269    
2270    #if !defined NOUTF8
2271            if (use_utf8 && c > 255)
2272              {
2273              unsigned char buff8[8];
2274              int ii, utn;
2275              utn = ord2utf8(c, buff8);
2276              for (ii = 0; ii < utn - 1; ii++) *q++ = buff8[ii];
2277              c = buff8[ii];   /* Last byte */
2278              }
2279    #endif
2280          break;          break;
2281    
2282          case 'x':          case 'x':
2283    
2284          /* Handle \x{..} specially - new Perl thing for utf8 */          /* Handle \x{..} specially - new Perl thing for utf8 */
2285    
2286    #if !defined NOUTF8
2287          if (*p == '{')          if (*p == '{')
2288            {            {
2289            unsigned char *pt = p;            unsigned char *pt = p;
# Line 1026  while (!done) Line 2294  while (!done)
2294              {              {
2295              unsigned char buff8[8];              unsigned char buff8[8];
2296              int ii, utn;              int ii, utn;
2297              utn = ord2utf8(c, buff8);              if (use_utf8)
2298              for (ii = 0; ii < utn - 1; ii++) *q++ = buff8[ii];                {
2299              c = buff8[ii];   /* Last byte */                utn = ord2utf8(c, buff8);
2300                  for (ii = 0; ii < utn - 1; ii++) *q++ = buff8[ii];
2301                  c = buff8[ii];   /* Last byte */
2302                  }
2303                else
2304                 {
2305                 if (c > 255)
2306                   fprintf(outfile, "** Character \\x{%x} is greater than 255 and "
2307                     "UTF-8 mode is not enabled.\n"
2308                     "** Truncation will probably give the wrong result.\n", c);
2309                 }
2310              p = pt + 1;              p = pt + 1;
2311              break;              break;
2312              }              }
2313            /* Not correct form; fall through */            /* Not correct form; fall through */
2314            }            }
2315    #endif
2316    
2317          /* Ordinary \x */          /* Ordinary \x */
2318    
# Line 1045  while (!done) Line 2324  while (!done)
2324            }            }
2325          break;          break;
2326    
2327          case 0:   /* Allows for an empty line */          case 0:   /* \ followed by EOF allows for an empty line */
2328          p--;          p--;
2329          continue;          continue;
2330    
2331            case '>':
2332            if (*p == '-')
2333              {
2334              start_offset_sign = -1;
2335              p++;
2336              }
2337            while(isdigit(*p)) start_offset = start_offset * 10 + *p++ - '0';
2338            start_offset *= start_offset_sign;
2339            continue;
2340    
2341          case 'A':  /* Option setting */          case 'A':  /* Option setting */
2342          options |= PCRE_ANCHORED;          options |= PCRE_ANCHORED;
2343          continue;          continue;
# Line 1065  while (!done) Line 2354  while (!done)
2354            }            }
2355          else if (isalnum(*p))          else if (isalnum(*p))
2356            {            {
2357            uschar name[256];            uschar *npp = copynamesptr;
           uschar *npp = name;  
2358            while (isalnum(*p)) *npp++ = *p++;            while (isalnum(*p)) *npp++ = *p++;
2359              *npp++ = 0;
2360            *npp = 0;            *npp = 0;
2361            n = pcre_get_stringnumber(re, (char *)name);            n = pcre_get_stringnumber(re, (char *)copynamesptr);
2362            if (n < 0)            if (n < 0)
2363              fprintf(outfile, "no parentheses with name \"%s\"\n", name);              fprintf(outfile, "no parentheses with name \"%s\"\n", copynamesptr);
2364            else copystrings |= 1 << n;            copynamesptr = npp;
2365            }            }
2366          else if (*p == '+')          else if (*p == '+')
2367            {            {
# Line 1110  while (!done) Line 2399  while (!done)
2399            }            }
2400          continue;          continue;
2401    
2402    #if !defined NODFA
2403            case 'D':
2404    #if !defined NOPOSIX
2405            if (posix || do_posix)
2406              printf("** Can't use dfa matching in POSIX mode: \\D ignored\n");
2407            else
2408    #endif
2409              use_dfa = 1;
2410            continue;
2411    #endif
2412    
2413    #if !defined NODFA
2414            case 'F':
2415            options |= PCRE_DFA_SHORTEST;
2416            continue;
2417    #endif
2418    
2419          case 'G':          case 'G':
2420          if (isdigit(*p))          if (isdigit(*p))
2421            {            {
# Line 1118  while (!done) Line 2424  while (!done)
2424            }            }
2425          else if (isalnum(*p))          else if (isalnum(*p))
2426            {            {
2427            uschar name[256];            uschar *npp = getnamesptr;
           uschar *npp = name;  
2428            while (isalnum(*p)) *npp++ = *p++;            while (isalnum(*p)) *npp++ = *p++;
2429              *npp++ = 0;
2430            *npp = 0;            *npp = 0;
2431            n = pcre_get_stringnumber(re, (char *)name);            n = pcre_get_stringnumber(re, (char *)getnamesptr);
2432            if (n < 0)            if (n < 0)
2433              fprintf(outfile, "no parentheses with name \"%s\"\n", name);              fprintf(outfile, "no parentheses with name \"%s\"\n", getnamesptr);
2434            else getstrings |= 1 << n;            getnamesptr = npp;
2435            }            }
2436          continue;          continue;
2437    
# Line 1138  while (!done) Line 2444  while (!done)
2444          continue;          continue;
2445    
2446          case 'N':          case 'N':
2447          options |= PCRE_NOTEMPTY;          if ((options & PCRE_NOTEMPTY) != 0)
2448              options = (options & ~PCRE_NOTEMPTY) | PCRE_NOTEMPTY_ATSTART;
2449            else
2450              options |= PCRE_NOTEMPTY;
2451          continue;          continue;
2452    
2453          case 'O':          case 'O':
# Line 1151  while (!done) Line 2460  while (!done)
2460            if (offsets == NULL)            if (offsets == NULL)
2461              {              {
2462              printf("** Failed to get %d bytes of memory for offsets vector\n",              printf("** Failed to get %d bytes of memory for offsets vector\n",
2463                size_offsets_max * sizeof(int));                (int)(size_offsets_max * sizeof(int)));
2464              return 1;              yield = 1;
2465                goto EXIT;
2466              }              }
2467            }            }
2468          use_size_offsets = n;          use_size_offsets = n;
2469          if (n == 0) use_offsets = NULL;   /* Ensures it can't write to it */          if (n == 0) use_offsets = NULL;   /* Ensures it can't write to it */
2470          continue;          continue;
2471    
2472            case 'P':
2473            options |= ((options & PCRE_PARTIAL_SOFT) == 0)?
2474              PCRE_PARTIAL_SOFT : PCRE_PARTIAL_HARD;
2475            continue;
2476    
2477            case 'Q':
2478            while(isdigit(*p)) n = n * 10 + *p++ - '0';
2479            if (extra == NULL)
2480              {
2481              extra = (pcre_extra *)malloc(sizeof(pcre_extra));
2482              extra->flags = 0;
2483              }
2484            extra->flags |= PCRE_EXTRA_MATCH_LIMIT_RECURSION;
2485            extra->match_limit_recursion = n;
2486            continue;
2487    
2488            case 'q':
2489            while(isdigit(*p)) n = n * 10 + *p++ - '0';
2490            if (extra == NULL)
2491              {
2492              extra = (pcre_extra *)malloc(sizeof(pcre_extra));
2493              extra->flags = 0;
2494              }
2495            extra->flags |= PCRE_EXTRA_MATCH_LIMIT;
2496            extra->match_limit = n;
2497            continue;
2498    
2499    #if !defined NODFA
2500            case 'R':
2501            options |= PCRE_DFA_RESTART;
2502            continue;
2503    #endif
2504    
2505          case 'S':          case 'S':
2506          show_malloc = 1;          show_malloc = 1;
2507          continue;          continue;
2508    
2509            case 'Y':
2510            options |= PCRE_NO_START_OPTIMIZE;
2511            continue;
2512    
2513          case 'Z':          case 'Z':
2514          options |= PCRE_NOTEOL;          options |= PCRE_NOTEOL;
2515          continue;          continue;
# Line 1170  while (!done) Line 2517  while (!done)
2517          case '?':          case '?':
2518          options |= PCRE_NO_UTF8_CHECK;          options |= PCRE_NO_UTF8_CHECK;
2519          continue;          continue;
2520    
2521            case '<':
2522              {
2523              int x = check_newline(p, outfile);
2524              if (x == 0) goto NEXT_DATA;
2525              options |= x;
2526              while (*p++ != '>');
2527              }
2528            continue;
2529          }          }
2530        *q++ = c;        *q++ = c;
2531        }        }
2532      *q = 0;      *q = 0;
2533      len = q - dbuffer;      len = (int)(q - dbuffer);
2534    
2535        /* Move the data to the end of the buffer so that a read over the end of
2536        the buffer will be seen by valgrind, even if it doesn't cause a crash. If
2537        we are using the POSIX interface, we must include the terminating zero. */
2538    
2539    #if !defined NOPOSIX
2540        if (posix || do_posix)
2541          {
2542          memmove(bptr + buffer_size - len - 1, bptr, len + 1);
2543          bptr += buffer_size - len - 1;
2544          }
2545        else
2546    #endif
2547          {
2548          memmove(bptr + buffer_size - len, bptr, len);
2549          bptr += buffer_size - len;
2550          }
2551    
2552        if ((all_use_dfa || use_dfa) && find_match_limit)
2553          {
2554          printf("**Match limit not relevant for DFA matching: ignored\n");
2555          find_match_limit = 0;
2556          }
2557    
2558      /* Handle matching via the POSIX interface, which does not      /* Handle matching via the POSIX interface, which does not
2559      support timing or playing with the match limit or callout data. */      support timing or playing with the match limit or callout data. */
# Line 1189  while (!done) Line 2568  while (!done)
2568          pmatch = (regmatch_t *)malloc(sizeof(regmatch_t) * use_size_offsets);          pmatch = (regmatch_t *)malloc(sizeof(regmatch_t) * use_size_offsets);
2569        if ((options & PCRE_NOTBOL) != 0) eflags |= REG_NOTBOL;        if ((options & PCRE_NOTBOL) != 0) eflags |= REG_NOTBOL;
2570        if ((options & PCRE_NOTEOL) != 0) eflags |= REG_NOTEOL;        if ((options & PCRE_NOTEOL) != 0) eflags |= REG_NOTEOL;
2571          if ((options & PCRE_NOTEMPTY) != 0) eflags |= REG_NOTEMPTY;
2572    
2573        rc = regexec(&preg, (const char *)bptr, use_size_offsets, pmatch, eflags);        rc = regexec(&preg, (const char *)bptr, use_size_offsets, pmatch, eflags);
2574    
2575        if (rc != 0)        if (rc != 0)
2576          {          {
2577          (void)regerror(rc, &preg, (char *)buffer, BUFFER_SIZE);          (void)regerror(rc, &preg, (char *)buffer, buffer_size);
2578          fprintf(outfile, "No match: POSIX code %d: %s\n", rc, buffer);          fprintf(outfile, "No match: POSIX code %d: %s\n", rc, buffer);
2579          }          }
2580          else if ((((const pcre *)preg.re_pcre)->options & PCRE_NO_AUTO_CAPTURE)
2581                  != 0)
2582            {
2583            fprintf(outfile, "Matched with REG_NOSUB\n");
2584            }
2585        else        else
2586          {          {
2587          size_t i;          size_t i;
# Line 1208  while (!done) Line 2593  while (!done)
2593              (void)pchars(dbuffer + pmatch[i].rm_so,              (void)pchars(dbuffer + pmatch[i].rm_so,
2594                pmatch[i].rm_eo - pmatch[i].rm_so, outfile);                pmatch[i].rm_eo - pmatch[i].rm_so, outfile);
2595              fprintf(outfile, "\n");              fprintf(outfile, "\n");
2596              if (i == 0 && do_showrest)              if (do_showcaprest || (i == 0 && do_showrest))
2597                {                {
2598                fprintf(outfile, " 0+ ");                fprintf(outfile, "%2d+ ", (int)i);
2599                (void)pchars(dbuffer + pmatch[i].rm_eo, len - pmatch[i].rm_eo,                (void)pchars(dbuffer + pmatch[i].rm_eo, len - pmatch[i].rm_eo,
2600                  outfile);                  outfile);
2601                fprintf(outfile, "\n");                fprintf(outfile, "\n");
# Line 1228  while (!done) Line 2613  while (!done)
2613    
2614      for (;; gmatched++)    /* Loop for /g or /G */      for (;; gmatched++)    /* Loop for /g or /G */
2615        {        {
2616        if (timeit)        markptr = NULL;
2617    
2618          if (timeitm > 0)
2619          {          {
2620          register int i;          register int i;
2621          clock_t time_taken;          clock_t time_taken;
2622          clock_t start_time = clock();          clock_t start_time = clock();
2623          for (i = 0; i < LOOPREPEAT; i++)  
2624    #if !defined NODFA
2625            if (all_use_dfa || use_dfa)
2626              {
2627              int workspace[1000];
2628              for (i = 0; i < timeitm; i++)
2629                count = pcre_dfa_exec(re, extra, (char *)bptr, len, start_offset,
2630                  options | g_notempty, use_offsets, use_size_offsets, workspace,
2631                  sizeof(workspace)/sizeof(int));
2632              }
2633            else
2634    #endif
2635    
2636            for (i = 0; i < timeitm; i++)
2637            count = pcre_exec(re, extra, (char *)bptr, len,            count = pcre_exec(re, extra, (char *)bptr, len,
2638              start_offset, options | g_notempty, use_offsets, use_size_offsets);              start_offset, options | g_notempty, use_offsets, use_size_offsets);
2639    
2640          time_taken = clock() - start_time;          time_taken = clock() - start_time;
2641          fprintf(outfile, "Execute time %.3f milliseconds\n",          fprintf(outfile, "Execute time %.4f milliseconds\n",
2642            (((double)time_taken * 1000.0) / (double)LOOPREPEAT) /            (((double)time_taken * 1000.0) / (double)timeitm) /
2643              (double)CLOCKS_PER_SEC);              (double)CLOCKS_PER_SEC);
2644          }          }
2645    
2646        /* If find_match_limit is set, we want to do repeated matches with        /* If find_match_limit is set, we want to do repeated matches with
2647        varying limits in order to find the minimum value. */        varying limits in order to find the minimum value for the match limit and
2648          for the recursion limit. */
2649    
2650        if (find_match_limit)        if (find_match_limit)
2651          {          {
         int min = 0;  
         int mid = 64;  
         int max = -1;  
   
2652          if (extra == NULL)          if (extra == NULL)
2653            {            {
2654            extra = (pcre_extra *)malloc(sizeof(pcre_extra));            extra = (pcre_extra *)malloc(sizeof(pcre_extra));
2655            extra->flags = 0;            extra->flags = 0;
2656            }            }
         extra->flags |= PCRE_EXTRA_MATCH_LIMIT;  
   
         for (;;)  
           {  
           extra->match_limit = mid;  
           count = pcre_exec(re, extra, (char *)bptr, len, start_offset,  
             options | g_notempty, use_offsets, use_size_offsets);  
           if (count == PCRE_ERROR_MATCHLIMIT)  
             {  
             /* fprintf(outfile, "Testing match limit = %d\n", mid); */  
             min = mid;  
             mid = (mid == max - 1)? max : (max > 0)? (min + max)/2 : mid*2;  
             }  
           else if (count >= 0 || count == PCRE_ERROR_NOMATCH)  
             {  
             if (mid == min + 1)  
               {  
               fprintf(outfile, "Minimum match limit = %d\n", mid);  
               break;  
               }  
             /* fprintf(outfile, "Testing match limit = %d\n", mid); */  
             max = mid;  
             mid = (min + mid)/2;  
             }  
           else break;    /* Some other error */  
           }  
2657    
2658          extra->flags &= ~PCRE_EXTRA_MATCH_LIMIT;          (void)check_match_limit(re, extra, bptr, len, start_offset,
2659              options|g_notempty, use_offsets, use_size_offsets,
2660              PCRE_EXTRA_MATCH_LIMIT, &(extra->match_limit),
2661              PCRE_ERROR_MATCHLIMIT, "match()");
2662    
2663            count = check_match_limit(re, extra, bptr, len, start_offset,
2664              options|g_notempty, use_offsets, use_size_offsets,
2665              PCRE_EXTRA_MATCH_LIMIT_RECURSION, &(extra->match_limit_recursion),
2666              PCRE_ERROR_RECURSIONLIMIT, "match() recursion");
2667          }          }
2668    
2669        /* If callout_data is set, use the interface with additional data */        /* If callout_data is set, use the interface with additional data */
# Line 1305  while (!done) Line 2685  while (!done)
2685        /* The normal case is just to do the match once, with the default        /* The normal case is just to do the match once, with the default
2686        value of match_limit. */        value of match_limit. */
2687    
2688        else count = pcre_exec(re, extra, (char *)bptr, len,  #if !defined NODFA
2689          start_offset, options | g_notempty, use_offsets, use_size_offsets);        else if (all_use_dfa || use_dfa)
2690            {
2691            int workspace[1000];
2692            count = pcre_dfa_exec(re, extra, (char *)bptr, len, start_offset,
2693              options | g_notempty, use_offsets, use_size_offsets, workspace,
2694              sizeof(workspace)/sizeof(int));
2695            if (count == 0)
2696              {
2697              fprintf(outfile, "Matched, but too many subsidiary matches\n");
2698              count = use_size_offsets/2;
2699              }
2700            }
2701    #endif
2702    
2703        if (count == 0)        else
2704          {          {
2705          fprintf(outfile, "Matched, but too many substrings\n");          count = pcre_exec(re, extra, (char *)bptr, len,
2706          count = use_size_offsets/3;            start_offset, options | g_notempty, use_offsets, use_size_offsets);
2707            if (count == 0)
2708              {
2709              fprintf(outfile, "Matched, but too many substrings\n");
2710              count = use_size_offsets/3;
2711              }
2712          }          }
2713    
2714        /* Matched */        /* Matched */
2715    
2716        if (count >= 0)        if (count >= 0)
2717          {          {
2718          int i;          int i, maxcount;
2719    
2720    #if !defined NODFA
2721            if (all_use_dfa || use_dfa) maxcount = use_size_offsets/2; else
2722    #endif
2723              maxcount = use_size_offsets/3;
2724    
2725            /* This is a check against a lunatic return value. */
2726    
2727            if (count > maxcount)
2728              {
2729              fprintf(outfile,
2730                "** PCRE error: returned count %d is too big for offset size %d\n",
2731                count, use_size_offsets);
2732              count = use_size_offsets/3;
2733              if (do_g || do_G)
2734                {
2735                fprintf(outfile, "** /%c loop abandoned\n", do_g? 'g' : 'G');
2736                do_g = do_G = FALSE;        /* Break g/G loop */
2737                }
2738              }
2739    
2740            /* do_allcaps requests showing of all captures in the pattern, to check
2741            unset ones at the end. */
2742    
2743            if (do_allcaps)
2744              {
2745              new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count);
2746              count++;   /* Allow for full match */
2747              if (count * 2 > use_size_offsets) count = use_size_offsets/2;
2748              }
2749    
2750            /* Output the captured substrings */
2751    
2752          for (i = 0; i < count * 2; i += 2)          for (i = 0; i < count * 2; i += 2)
2753            {            {
2754            if (use_offsets[i] < 0)            if (use_offsets[i] < 0)
2755                {
2756                if (use_offsets[i] != -1)
2757                  fprintf(outfile, "ERROR: bad negative value %d for offset %d\n",
2758                    use_offsets[i], i);
2759                if (use_offsets[i+1] != -1)
2760                  fprintf(outfile, "ERROR: bad negative value %d for offset %d\n",
2761                    use_offsets[i+1], i+1);
2762              fprintf(outfile, "%2d: <unset>\n", i/2);              fprintf(outfile, "%2d: <unset>\n", i/2);
2763                }
2764            else            else
2765              {              {
2766              fprintf(outfile, "%2d: ", i/2);              fprintf(outfile, "%2d: ", i/2);
2767              (void)pchars(bptr + use_offsets[i],              (void)pchars(bptr + use_offsets[i],
2768                use_offsets[i+1] - use_offsets[i], outfile);                use_offsets[i+1] - use_offsets[i], outfile);
2769              fprintf(outfile, "\n");              fprintf(outfile, "\n");
2770              if (i == 0)              if (do_showcaprest || (i == 0 && do_showrest))
2771                {                {
2772                if (do_showrest)                fprintf(outfile, "%2d+ ", i/2);
2773                  {                (void)pchars(bptr + use_offsets[i+1], len - use_offsets[i+1],
2774                  fprintf(outfile, " 0+ ");                  outfile);
2775                  (void)pchars(bptr + use_offsets[i+1], len - use_offsets[i+1],                fprintf(outfile, "\n");
                   outfile);  
                 fprintf(outfile, "\n");  
                 }  
2776                }                }
2777              }              }
2778            }            }
2779    
2780            if (markptr != NULL) fprintf(outfile, "MK: %s\n", markptr);
2781    
2782          for (i = 0; i < 32; i++)          for (i = 0; i < 32; i++)
2783            {            {
2784            if ((copystrings & (1 << i)) != 0)            if ((copystrings & (1 << i)) != 0)
2785              {              {
2786              char copybuffer[16];              char copybuffer[256];
2787              int rc = pcre_copy_substring((char *)bptr, use_offsets, count,              int rc = pcre_copy_substring((char *)bptr, use_offsets, count,
2788                i, copybuffer, sizeof(copybuffer));                i, copybuffer, sizeof(copybuffer));
2789              if (rc < 0)              if (rc < 0)
# Line 1356  while (!done) Line 2793  while (!done)
2793              }              }
2794            }            }
2795    
2796            for (copynamesptr = copynames;
2797                 *copynamesptr != 0;
2798                 copynamesptr += (int)strlen((char*)copynamesptr) + 1)
2799              {
2800              char copybuffer[256];
2801              int rc = pcre_copy_named_substring(re, (char *)bptr, use_offsets,
2802                count, (char *)copynamesptr, copybuffer, sizeof(copybuffer));
2803              if (rc < 0)
2804                fprintf(outfile, "copy substring %s failed %d\n", copynamesptr, rc);
2805              else
2806                fprintf(outfile, "  C %s (%d) %s\n", copybuffer, rc, copynamesptr);
2807              }
2808    
2809          for (i = 0; i < 32; i++)          for (i = 0; i < 32; i++)
2810            {            {
2811            if ((getstrings & (1 << i)) != 0)            if ((getstrings & (1 << i)) != 0)
# Line 1368  while (!done) Line 2818  while (!done)
2818              else              else
2819                {                {
2820                fprintf(outfile, "%2dG %s (%d)\n", i, substring, rc);                fprintf(outfile, "%2dG %s (%d)\n", i, substring, rc);
               /* free((void *)substring); */  
2821                pcre_free_substring(substring);                pcre_free_substring(substring);
2822                }                }
2823              }              }
2824            }            }
2825    
2826            for (getnamesptr = getnames;
2827                 *getnamesptr != 0;
2828                 getnamesptr += (int)strlen((char*)getnamesptr) + 1)
2829              {
2830              const char *substring;
2831              int rc = pcre_get_named_substring(re, (char *)bptr, use_offsets,
2832                count, (char *)getnamesptr, &substring);
2833              if (rc < 0)
2834                fprintf(outfile, "copy substring %s failed %d\n", getnamesptr, rc);
2835              else
2836                {
2837                fprintf(outfile, "  G %s (%d) %s\n", substring, rc, getnamesptr);
2838                pcre_free_substring(substring);
2839                }
2840              }
2841    
2842          if (getlist)          if (getlist)
2843            {            {
2844            const char **stringlist;            const char **stringlist;
# Line 1393  while (!done) Line 2858  while (!done)
2858            }            }
2859          }          }
2860    
2861          /* There was a partial match */
2862    
2863          else if (count == PCRE_ERROR_PARTIAL)
2864            {
2865            if (markptr == NULL) fprintf(outfile, "Partial match");
2866              else fprintf(outfile, "Partial match, mark=%s", markptr);
2867            if (use_size_offsets > 1)
2868              {
2869              fprintf(outfile, ": ");
2870              pchars(bptr + use_offsets[0], use_offsets[1] - use_offsets[0],
2871                outfile);
2872              }
2873            fprintf(outfile, "\n");
2874            break;  /* Out of the /g loop */
2875            }
2876    
2877        /* Failed to match. If this is a /g or /G loop and we previously set        /* Failed to match. If this is a /g or /G loop and we previously set
2878        g_notempty after a null match, this is not necessarily the end.        g_notempty after a null match, this is not necessarily the end. We want
2879        We want to advance the start offset, and continue. In the case of UTF-8        to advance the start offset, and continue. We won't be at the end of the
2880        matching, the advance must be one character, not one byte. Fudge the        string - that was checked before setting g_notempty.
2881        offset values to achieve this. We won't be at the end of the string -  
2882        that was checked before setting g_notempty. */        Complication arises in the case when the newline convention is "any",
2883          "crlf", or "anycrlf". If the previous match was at the end of a line
2884          terminated by CRLF, an advance of one character just passes the \r,
2885          whereas we should prefer the longer newline sequence, as does the code in
2886          pcre_exec(). Fudge the offset value to achieve this. We check for a
2887          newline setting in the pattern; if none was set, use pcre_config() to
2888          find the default.
2889    
2890          Otherwise, in the case of UTF-8 matching, the advance must be one
2891          character, not one byte. */
2892    
2893        else        else
2894          {          {
2895          if (g_notempty != 0)          if (g_notempty != 0)
2896            {            {
2897            int onechar = 1;            int onechar = 1;
2898              unsigned int obits = ((real_pcre *)re)->options;
2899            use_offsets[0] = start_offset;            use_offsets[0] = start_offset;
2900            if (use_utf8)            if ((obits & PCRE_NEWLINE_BITS) == 0)
2901                {
2902                int d;
2903                (void)pcre_config(PCRE_CONFIG_NEWLINE, &d);
2904                /* Note that these values are always the ASCII ones, even in
2905                EBCDIC environments. CR = 13, NL = 10. */
2906                obits = (d == 13)? PCRE_NEWLINE_CR :
2907                        (d == 10)? PCRE_NEWLINE_LF :
2908                        (d == (13<<8 | 10))? PCRE_NEWLINE_CRLF :
2909                        (d == -2)? PCRE_NEWLINE_ANYCRLF :
2910                        (d == -1)? PCRE_NEWLINE_ANY : 0;
2911                }
2912              if (((obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_ANY ||
2913                   (obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_CRLF ||
2914                   (obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_ANYCRLF)
2915                  &&
2916                  start_offset < len - 1 &&
2917                  bptr[start_offset] == '\r' &&
2918                  bptr[start_offset+1] == '\n')
2919                onechar++;
2920              else if (use_utf8)
2921              {              {
2922              while (start_offset + onechar < len)              while (start_offset + onechar < len)
2923                {                {
2924                int tb = bptr[start_offset+onechar];                if ((bptr[start_offset+onechar] & 0xc0) != 0x80) break;
2925                if (tb <= 127) break;                onechar++;
               tb &= 0xc0;  
               if (tb != 0 && tb != 0xc0) onechar++;  
2926                }                }
2927              }              }
2928            use_offsets[1] = start_offset + onechar;            use_offsets[1] = start_offset + onechar;
2929            }            }
2930          else          else
2931            {            {
2932            if (count == PCRE_ERROR_NOMATCH)            switch(count)
2933              {              {
2934              if (gmatched == 0) fprintf(outfile, "No match\n");              case PCRE_ERROR_NOMATCH:
2935                if (gmatched == 0)
2936                  {
2937                  if (markptr == NULL) fprintf(outfile, "No match\n");
2938                    else fprintf(outfile, "No match, mark = %s\n", markptr);
2939                  }
2940                break;
2941    
2942                case PCRE_ERROR_BADUTF8:
2943                case PCRE_ERROR_SHORTUTF8:
2944                fprintf(outfile, "Error %d (%s UTF-8 string)", count,
2945                  (count == PCRE_ERROR_BADUTF8)? "bad" : "short");
2946                if (use_size_offsets >= 2)
2947                  fprintf(outfile, " offset=%d reason=%d", use_offsets[0],
2948                    use_offsets[1]);
2949                fprintf(outfile, "\n");
2950                break;
2951    
2952                default:
2953                if (count < 0 && (-count) < sizeof(errtexts)/sizeof(const char *))
2954                  fprintf(outfile, "Error %d (%s)\n", count, errtexts[-count]);
2955                else
2956                  fprintf(outfile, "Error %d (Unexpected value)\n", count);
2957                break;
2958              }              }
2959            else fprintf(outfile, "Error %d\n", count);  
2960            break;  /* Out of the /g loop */            break;  /* Out of the /g loop */
2961            }            }
2962          }          }
# Line 1434  while (!done) Line 2966  while (!done)
2966        if (!do_g && !do_G) break;        if (!do_g && !do_G) break;
2967    
2968        /* If we have matched an empty string, first check to see if we are at        /* If we have matched an empty string, first check to see if we are at
2969        the end of the subject. If so, the /g loop is over. Otherwise, mimic        the end of the subject. If so, the /g loop is over. Otherwise, mimic what
2970        what Perl's /g options does. This turns out to be rather cunning. First        Perl's /g options does. This turns out to be rather cunning. First we set
2971        we set PCRE_NOTEMPTY and PCRE_ANCHORED and try the match again at the        PCRE_NOTEMPTY_ATSTART and PCRE_ANCHORED and try the match again at the
2972        same point. If this fails (picked up above) we advance to the next        same point. If this fails (picked up above) we advance to the next
2973        character. */        character. */
2974    
2975        g_notempty = 0;        g_notempty = 0;
2976    
2977        if (use_offsets[0] == use_offsets[1])        if (use_offsets[0] == use_offsets[1])
2978          {          {
2979          if (use_offsets[0] == len) break;          if (use_offsets[0] == len) break;
2980          g_notempty = PCRE_NOTEMPTY | PCRE_ANCHORED;          g_notempty = PCRE_NOTEMPTY_ATSTART | PCRE_ANCHORED;
2981          }          }
2982    
2983        /* For /g, update the start offset, leaving the rest alone */        /* For /g, update the start offset, leaving the rest alone */
# Line 1459  while (!done) Line 2992  while (!done)
2992          len -= use_offsets[1];          len -= use_offsets[1];
2993          }          }
2994        }  /* End of loop for /g and /G */        }  /* End of loop for /g and /G */
2995    
2996        NEXT_DATA: continue;
2997      }    /* End of loop for data lines */      }    /* End of loop for data lines */
2998    
2999    CONTINUE:    CONTINUE:
# Line 1467  while (!done) Line 3002  while (!done)
3002    if (posix || do_posix) regfree(&preg);    if (posix || do_posix) regfree(&preg);
3003  #endif  #endif
3004    
3005    if (re != NULL) free(re);    if (re != NULL) new_free(re);
3006    if (extra != NULL) free(extra);    if (extra != NULL) new_free(extra);
3007    if (tables != NULL)    if (locale_set)
3008      {      {
3009      free((void *)tables);      new_free((void *)tables);
3010      setlocale(LC_CTYPE, "C");      setlocale(LC_CTYPE, "C");
3011        locale_set = 0;
3012      }      }
3013    }    }
3014    
3015  if (infile == stdin) fprintf(outfile, "\n");  if (infile == stdin) fprintf(outfile, "\n");
3016  return 0;  
3017    EXIT:
3018    
3019    if (infile != NULL && infile != stdin) fclose(infile);
3020    if (outfile != NULL && outfile != stdout) fclose(outfile);
3021    
3022    free(buffer);
3023    free(dbuffer);
3024    free(pbuffer);
3025    free(offsets);
3026    
3027    return yield;
3028  }  }
3029    
3030  /* End */  /* End of pcretest.c */

Legend:
Removed from v.73  
changed lines
  Added in v.626

  ViewVC Help
Powered by ViewVC 1.1.5