ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 100 by ph10, Tue Mar 6 14:53:10 2007 UTC revision 221 by ph10, Fri Aug 17 09:25:08 2007 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
4  Version 7.1 05-Mar-07  Version 7.3 17-Aug-07
5  ---------------------  ---------------------
7   1. Applied Bob Rossi and Daniel G's patches to convert the build system to one   1. In the rejigging of the build system that eventually resulted in 7.1, the
8      that is more "standard", making use of automake and other autotools. There      line "#include <pcre.h>" was included in pcre_internal.h. The use of angle
9        brackets there is not right, since it causes compilers to look for an
10        installed pcre.h, not the version that is in the source that is being
11        compiled (which of course may be different). I have changed it back to:
13          #include "pcre.h"
15        I have a vague recollection that the change was concerned with compiling in
16        different directories, but in the new build system, that is taken care of
17        by the VPATH setting the Makefile.
19     2. The pattern .*$ when run in not-DOTALL UTF-8 mode with newline=any failed
20        when the subject happened to end in the byte 0x85 (e.g. if the last
21        character was \x{1ec5}). *Character* 0x85 is one of the "any" newline
22        characters but of course it shouldn't be taken as a newline when it is part
23        of another character. The bug was that, for an unlimited repeat of . in
24        not-DOTALL UTF-8 mode, PCRE was advancing by bytes rather than by
25        characters when looking for a newline.
27     3. A small performance improvement in the DOTALL UTF-8 mode .* case.
29     4. Debugging: adjusted the names of opcodes for different kinds of parentheses
30        in debug output.
32     5. Arrange to use "%I64d" instead of "%lld" and "%I64u" instead of "%llu" for
33        long printing in the pcrecpp unittest when running under MinGW.
35     6. ESC_K was left out of the EBCDIC table.
37     7. Change 7.0/38 introduced a new limit on the number of nested non-capturing
38        parentheses; I made it 1000, which seemed large enough. Unfortunately, the
39        limit also applies to "virtual nesting" when a pattern is recursive, and in
40        this case 1000 isn't so big. I have been able to remove this limit at the
41        expense of backing off one optimization in certain circumstances. Normally,
42        when pcre_exec() would call its internal match() function recursively and
43        immediately return the result unconditionally, it uses a "tail recursion"
44        feature to save stack. However, when a subpattern that can match an empty
45        string has an unlimited repetition quantifier, it no longer makes this
46        optimization. That gives it a stack frame in which to save the data for
47        checking that an empty string has been matched. Previously this was taken
48        from the 1000-entry workspace that had been reserved. So now there is no
49        explicit limit, but more stack is used.
51     8. Applied Daniel's patches to solve problems with the import/export magic
52        syntax that is required for Windows, and which was going wrong for the
53        pcreposix and pcrecpp parts of the library. These were overlooked when this
54        problem was solved for the main library.
56     9. There were some crude static tests to avoid integer overflow when computing
57        the size of patterns that contain repeated groups with explicit upper
58        limits. As the maximum quantifier is 65535, the maximum group length was
59        set at 30,000 so that the product of these two numbers did not overflow a
60        32-bit integer. However, it turns out that people want to use groups that
61        are longer than 30,000 bytes (though not repeat them that many times).
62        Change 7.0/17 (the refactoring of the way the pattern size is computed) has
63        made it possible to implement the integer overflow checks in a much more
64        dynamic way, which I have now done. The artificial limitation on group
65        length has been removed - we now have only the limit on the total length of
66        the compiled pattern, which depends on the LINK_SIZE setting.
68    10. Fixed a bug in the documentation for get/copy named substring when
69        duplicate names are permitted. If none of the named substrings are set, the
70        functions return PCRE_ERROR_NOSUBSTRING (7); the doc said they returned an
71        empty string.
73    11. Because Perl interprets \Q...\E at a high level, and ignores orphan \E
74        instances, patterns such as [\Q\E] or [\E] or even [^\E] cause an error,
75        because the ] is interpreted as the first data character and the
76        terminating ] is not found. PCRE has been made compatible with Perl in this
77        regard. Previously, it interpreted [\Q\E] as an empty class, and [\E] could
78        cause memory overwriting.
80    10. Like Perl, PCRE automatically breaks an unlimited repeat after an empty
81        string has been matched (to stop an infinite loop). It was not recognizing
82        a conditional subpattern that could match an empty string if that
83        subpattern was within another subpattern. For example, it looped when
84        trying to match  (((?(1)X|))*)  but it was OK with  ((?(1)X|)*)  where the
85        condition was not nested. This bug has been fixed.
87    12. A pattern like \X?\d or \P{L}?\d in non-UTF-8 mode could cause a backtrack
88        past the start of the subject in the presence of bytes with the top bit
89        set, for example "\x8aBCD".
91    13. Added Perl 5.10 experimental backtracking controls (*FAIL), (*F), (*PRUNE),
92        (*SKIP), (*THEN), (*COMMIT), and (*ACCEPT).
94    14. Optimized (?!) to (*FAIL).
96    15. Updated the test for a valid UTF-8 string to conform to the later RFC 3629.
97        This restricts code points to be within the range 0 to 0x10FFFF, excluding
98        the "low surrogate" sequence 0xD800 to 0xDFFF. Previously, PCRE allowed the
99        full range 0 to 0x7FFFFFFF, as defined by RFC 2279. Internally, it still
100        does: it's just the validity check that is more restrictive.
102    16. Inserted checks for integer overflows during escape sequence (backslash)
103        processing, and also fixed erroneous offset values for syntax errors during
104        backslash processing.
106    17. Fixed another case of looking too far back in non-UTF-8 mode (cf 12 above)
107        for patterns like [\PPP\x8a]{1,}\x80 with the subject "A\x80".
109    18. An unterminated class in a pattern like (?1)\c[ with a "forward reference"
110        caused an overrun.
112    19. A pattern like (?:[\PPa*]*){8,} which had an "extended class" (one with
113        something other than just ASCII characters) inside a group that had an
114        unlimited repeat caused a loop at compile time (while checking to see
115        whether the group could match an empty string).
117    20. Debugging a pattern containing \p or \P could cause a crash. For example,
118        [\P{Any}] did so. (Error in the code for printing property names.)
120    21. An orphan \E inside a character class could cause a crash.
122    22. A repeated capturing bracket such as (A)? could cause a wild memory
123        reference during compilation.
125    23. There are several functions in pcre_compile() that scan along a compiled
126        expression for various reasons (e.g. to see if it's fixed length for look
127        behind). There were bugs in these functions when a repeated \p or \P was
128        present in the pattern. These operators have additional parameters compared
129        with \d, etc, and these were not being taken into account when moving along
130        the compiled data. Specifically:
132        (a) A item such as \p{Yi}{3} in a lookbehind was not treated as fixed
133            length.
135        (b) An item such as \pL+ within a repeated group could cause crashes or
136            loops.
138        (c) A pattern such as \p{Yi}+(\P{Yi}+)(?1) could give an incorrect
139            "reference to non-existent subpattern" error.
141        (d) A pattern like (\P{Yi}{2}\277)? could loop at compile time.
143    24. A repeated \S or \W in UTF-8 mode could give wrong answers when multibyte
144        characters were involved (for example /\S{2}/8g with "A\x{a3}BC").
147    Version 7.2 19-Jun-07
148    ---------------------
150     1. If the fr_FR locale cannot be found for test 3, try the "french" locale,
151        which is apparently normally available under Windows.
153     2. Re-jig the pcregrep tests with different newline settings in an attempt
154        to make them independent of the local environment's newline setting.
156     3. Add code to configure.ac to remove -g from the CFLAGS default settings.
158     4. Some of the "internals" tests were previously cut out when the link size
159        was not 2, because the output contained actual offsets. The recent new
160        "Z" feature of pcretest means that these can be cut out, making the tests
161        usable with all link sizes.
163     5. Implemented Stan Switzer's goto replacement for longjmp() when not using
164        stack recursion. This gives a massive performance boost under BSD, but just
165        a small improvement under Linux. However, it saves one field in the frame
166        in all cases.
168     6. Added more features from the forthcoming Perl 5.10:
170        (a) (?-n) (where n is a string of digits) is a relative subroutine or
171            recursion call. It refers to the nth most recently opened parentheses.
173        (b) (?+n) is also a relative subroutine call; it refers to the nth next
174            to be opened parentheses.
176        (c) Conditions that refer to capturing parentheses can be specified
177            relatively, for example, (?(-2)... or (?(+3)...
179        (d) \K resets the start of the current match so that everything before
180            is not part of it.
182        (e) \k{name} is synonymous with \k<name> and \k'name' (.NET compatible).
184        (f) \g{name} is another synonym - part of Perl 5.10's unification of
185            reference syntax.
187        (g) (?| introduces a group in which the numbering of parentheses in each
188            alternative starts with the same number.
190        (h) \h, \H, \v, and \V match horizontal and vertical whitespace.
192     7. Added two new calls to pcre_fullinfo(): PCRE_INFO_OKPARTIAL and
195     8. A pattern such as  (.*(.)?)*  caused pcre_exec() to fail by either not
196        terminating or by crashing. Diagnosed by Viktor Griph; it was in the code
197        for detecting groups that can match an empty string.
199     9. A pattern with a very large number of alternatives (more than several
200        hundred) was running out of internal workspace during the pre-compile
201        phase, where pcre_compile() figures out how much memory will be needed. A
202        bit of new cunning has reduced the workspace needed for groups with
203        alternatives. The 1000-alternative test pattern now uses 12 bytes of
204        workspace instead of running out of the 4096 that are available.
206    10. Inserted some missing (unsigned int) casts to get rid of compiler warnings.
208    11. Applied patch from Google to remove an optimization that didn't quite work.
209        The report of the bug said:
211          pcrecpp::RE("a*").FullMatch("aaa") matches, while
212          pcrecpp::RE("a*?").FullMatch("aaa") does not, and
213          pcrecpp::RE("a*?\\z").FullMatch("aaa") does again.
215    12. If \p or \P was used in non-UTF-8 mode on a character greater than 127
216        it matched the wrong number of bytes.
219    Version 7.1 24-Apr-07
220    ---------------------
222     1. Applied Bob Rossi and Daniel G's patches to convert the build system to one
223        that is more "standard", making use of automake and other Autotools. There
224      is some re-arrangement of the files and adjustment of comments consequent      is some re-arrangement of the files and adjustment of comments consequent
225      on this.      on this.
227   2. Part of the patch fixed a problem with the pcregrep tests. The test of -r   2. Part of the patch fixed a problem with the pcregrep tests. The test of -r
228      for recursive directory scanning broke on some systems because the files      for recursive directory scanning broke on some systems because the files
229      are not scanned in any specific order and on different systems the order      are not scanned in any specific order and on different systems the order
230      was different. A call to "sort" has been inserted into RunGrepTest for the      was different. A call to "sort" has been inserted into RunGrepTest for the
231      approprate test as a short-term fix. In the longer term there may be an      approprate test as a short-term fix. In the longer term there may be an
232      alternative.      alternative.
234   3. I had an email from Eric Raymond about problems translating some of PCRE's   3. I had an email from Eric Raymond about problems translating some of PCRE's
235      man pages to HTML (despite the fact that I distribute HTML pages, some      man pages to HTML (despite the fact that I distribute HTML pages, some
236      people do their own conversions for various reasons). The problems      people do their own conversions for various reasons). The problems
237      concerned the use of low-level troff macros .br and .in. I have therefore      concerned the use of low-level troff macros .br and .in. I have therefore
238      removed all such uses from the man pages (some were redundant, some could      removed all such uses from the man pages (some were redundant, some could
239      be replaced by .nf/.fi pairs). The maintain/132html script that I use to      be replaced by .nf/.fi pairs). The 132html script that I use to generate
240      generate HTML has been updated to handle .nf/.fi and to complain if it      HTML has been updated to handle .nf/.fi and to complain if it encounters
241      encounters .br or .in.      .br or .in.
243   4. Updated comments in configure.ac that get placed in config.h.in and also   4. Updated comments in configure.ac that get placed in config.h.in and also
244      arranged for config.h to be included in the distribution, for the benefit      arranged for config.h to be included in the distribution, with the name
245      of those who have to compile without Autotools (compare pcre.h).      config.h.generic, for the benefit of those who have to compile without
246        Autotools (compare pcre.h, which is now distributed as pcre.h.generic).
248     5. Updated the support (such as it is) for Virtual Pascal, thanks to Stefan
249        Weber: (1) pcre_internal.h was missing some function renames; (2) updated
250        makevp.bat for the current PCRE, using the additional files
251        makevp_c.txt, makevp_l.txt, and pcregexp.pas.
253     6. A Windows user reported a minor discrepancy with test 2, which turned out
254        to be caused by a trailing space on an input line that had got lost in his
255        copy. The trailing space was an accident, so I've just removed it.
257     7. Add -Wl,-R... flags in pcre-config.in for *BSD* systems, as I'm told
258        that is needed.
260     8. Mark ucp_table (in ucptable.h) and ucp_gentype (in pcre_ucp_searchfuncs.c)
261        as "const" (a) because they are and (b) because it helps the PHP
262        maintainers who have recently made a script to detect big data structures
263        in the php code that should be moved to the .rodata section. I remembered
264        to update Builducptable as well, so it won't revert if ucptable.h is ever
265        re-created.
267     9. Added some extra #ifdef SUPPORT_UTF8 conditionals into pcretest.c,
268        pcre_printint.src, pcre_compile.c, pcre_study.c, and pcre_tables.c, in
269        order to be able to cut out the UTF-8 tables in the latter when UTF-8
270        support is not required. This saves 1.5-2K of code, which is important in
271        some applications.
273        Later: more #ifdefs are needed in pcre_ord2utf8.c and pcre_valid_utf8.c
274        so as not to refer to the tables, even though these functions will never be
275        called when UTF-8 support is disabled. Otherwise there are problems with a
276        shared library.
278    10. Fixed two bugs in the emulated memmove() function in pcre_internal.h:
280        (a) It was defining its arguments as char * instead of void *.
282        (b) It was assuming that all moves were upwards in memory; this was true
283            a long time ago when I wrote it, but is no longer the case.
285        The emulated memove() is provided for those environments that have neither
286        memmove() nor bcopy(). I didn't think anyone used it these days, but that
287        is clearly not the case, as these two bugs were recently reported.
289    11. The script PrepareRelease is now distributed: it calls 132html, CleanTxt,
290        and Detrail to create the HTML documentation, the .txt form of the man
291        pages, and it removes trailing spaces from listed files. It also creates
292        pcre.h.generic and config.h.generic from pcre.h and config.h. In the latter
293        case, it wraps all the #defines with #ifndefs. This script should be run
294        before "make dist".
296    12. Fixed two fairly obscure bugs concerned with quantified caseless matching
297        with Unicode property support.
299        (a) For a maximizing quantifier, if the two different cases of the
300            character were of different lengths in their UTF-8 codings (there are
301            some cases like this - I found 11), and the matching function had to
302            back up over a mixture of the two cases, it incorrectly assumed they
303            were both the same length.
305        (b) When PCRE was configured to use the heap rather than the stack for
306            recursion during matching, it was not correctly preserving the data for
307            the other case of a UTF-8 character when checking ahead for a match
308            while processing a minimizing repeat. If the check also involved
309            matching a wide character, but failed, corruption could cause an
310            erroneous result when trying to check for a repeat of the original
311            character.
313    13. Some tidying changes to the testing mechanism:
315        (a) The RunTest script now detects the internal link size and whether there
316            is UTF-8 and UCP support by running ./pcretest -C instead of relying on
317            values substituted by "configure". (The RunGrepTest script already did
318            this for UTF-8.) The configure.ac script no longer substitutes the
319            relevant variables.
321        (b) The debugging options /B and /D in pcretest show the compiled bytecode
322            with length and offset values. This means that the output is different
323            for different internal link sizes. Test 2 is skipped for link sizes
324            other than 2 because of this, bypassing the problem. Unfortunately,
325            there was also a test in test 3 (the locale tests) that used /B and
326            failed for link sizes other than 2. Rather than cut the whole test out,
327            I have added a new /Z option to pcretest that replaces the length and
328            offset values with spaces. This is now used to make test 3 independent
329            of link size. (Test 2 will be tidied up later.)
331    14. If erroroffset was passed as NULL to pcre_compile, it provoked a
332        segmentation fault instead of returning the appropriate error message.
334    15. In multiline mode when the newline sequence was set to "any", the pattern
335        ^$ would give a match between the \r and \n of a subject such as "A\r\nB".
336        This doesn't seem right; it now treats the CRLF combination as the line
337        ending, and so does not match in that case. It's only a pattern such as ^$
338        that would hit this one: something like ^ABC$ would have failed after \r
339        and then tried again after \r\n.
341    16. Changed the comparison command for RunGrepTest from "diff -u" to "diff -ub"
342        in an attempt to make files that differ only in their line terminators
343        compare equal. This works on Linux.
345    17. Under certain error circumstances pcregrep might try to free random memory
346        as it exited. This is now fixed, thanks to valgrind.
348    19. In pcretest, if the pattern /(?m)^$/g<any> was matched against the string
349        "abc\r\n\r\n", it found an unwanted second match after the second \r. This
350        was because its rules for how to advance for /g after matching an empty
351        string at the end of a line did not allow for this case. They now check for
352        it specially.
354    20. pcretest is supposed to handle patterns and data of any length, by
355        extending its buffers when necessary. It was getting this wrong when the
356        buffer for a data line had to be extended.
358    21. Added PCRE_NEWLINE_ANYCRLF which is like ANY, but matches only CR, LF, or
359        CRLF as a newline sequence.
361    22. Code for handling Unicode properties in pcre_dfa_exec() wasn't being cut
362        out by #ifdef SUPPORT_UCP. This did no harm, as it could never be used, but
363        I have nevertheless tidied it up.
365    23. Added some casts to kill warnings from HP-UX ia64 compiler.
367    24. Added a man page for pcre-config.
370  Version 7.0 19-Dec-06  Version 7.0 19-Dec-06
371  ---------------------  ---------------------

Removed from v.100  
changed lines
  Added in v.221

  ViewVC Help
Powered by ViewVC 1.1.5