ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 102 by ph10, Tue Mar 6 15:50:45 2007 UTC revision 949 by zherczeg, Thu Mar 8 10:28:49 2012 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
4  Version 7.1 05-Mar-07  Version 8.31
5    -----------------------------
7    1.  Fixing a wrong JIT test case and some compiler warnings.
9    2.  Removed a bashism from the RunTest script.
11    3.  Add a cast to pcre_exec.c to fix the warning "unary minus operator applied
12        to unsigned type, result still unsigned" that was given by an MS compiler
13        on encountering the code "-sizeof(xxx)".
15    4.  Partial matching support is added to the JIT compiler.
17    5.  Fixed several bugs concerned with partial matching of items that consist
18        of more than one character:
20        (a) /^(..)\1/ did not partially match "aba" because checking references was
21            done on an "all or nothing" basis. This also applied to repeated
22            references.
24        (b) \R did not give a hard partial match if \r was found at the end of the
25            subject.
27        (c) \X did not give a hard partial match after matching one or more
28            characters at the end of the subject.
30        (d) When newline was set to CRLF, a pattern such as /a$/ did not recognize
31            a partial match for the string "\r".
33        (e) When newline was set to CRLF, the metacharacter "." did not recognize
34            a partial match for a CR character at the end of the subject string.
36    6.  If JIT is requested using /S++ or -s++ (instead of just /S+ or -s+) when
37        running pcretest, the text "(JIT)" added to the output whenever JIT is
38        actually used to run the match.
40    7.  Individual JIT compile options can be set in pcretest by following -s+[+]
41        or /S+[+] with a digit between 1 and 7.
43    8.  OP_NOT now supports any UTF character not just single-byte ones.
45    9.  (*MARK) control verb is now supported by the JIT compiler.
47    10. The command "./RunTest list" lists the available tests without actually
48        running any of them. (Because I keep forgetting what they all are.)
52    12. Applied a (slightly modified) user-supplied patch that improves performance
53        when the heap is used for recursion (compiled with --disable-stack-for-
54        recursion). Instead of malloc and free for each heap frame each time a
55        logical recursion happens, frames are retained on a chain and re-used where
56        possible. This sometimes gives as much as 30% improvement.
58    13. As documented, (*COMMIT) is now confined to within a recursive subpattern
59        call.
61    14. As documented, (*COMMIT) is now confined to within a positive assertion.
63    15. It is now possible to link pcretest with libedit as an alternative to
64        libreadline.
66    16. (*COMMIT) control verb is now supported by the JIT compiler.
68    17. The Unicode data tables have been updated to Unicode 6.1.0.
70    18. Added --file-list option to pcregrep.
72    19. Added binary file support to pcregrep, including the -a, --binary-files,
73        -I, and --text options.
75    20. The madvise function is renamed for posix_madvise for QNX compatibility
76        reasons. Fixed by Giuseppe D'Angelo.
79    Version 8.30 04-February-2012
80    -----------------------------
82    1.  Renamed "isnumber" as "is_a_number" because in some Mac environments this
83        name is defined in ctype.h.
85    2.  Fixed a bug in fixed-length calculation for lookbehinds that would show up
86        only in quite long subpatterns.
88    3.  Removed the function pcre_info(), which has been obsolete and deprecated
89        since it was replaced by pcre_fullinfo() in February 2000.
91    4.  For a non-anchored pattern, if (*SKIP) was given with a name that did not
92        match a (*MARK), and the match failed at the start of the subject, a
93        reference to memory before the start of the subject could occur. This bug
94        was introduced by fix 17 of release 8.21.
96    5.  A reference to an unset group with zero minimum repetition was giving
97        totally wrong answers (in non-JavaScript-compatibility mode). For example,
98        /(another)?(\1?)test/ matched against "hello world test". This bug was
99        introduced in release 8.13.
101    6.  Add support for 16-bit character strings (a large amount of work involving
102        many changes and refactorings).
104    7.  RunGrepTest failed on msys because \r\n was replaced by whitespace when the
105        command "pattern=`printf 'xxx\r\njkl'`" was run. The pattern is now taken
106        from a file.
108    8.  Ovector size of 2 is also supported by JIT based pcre_exec (the ovector size
109        rounding is not applied in this particular case).
111    9.  The invalid Unicode surrogate codepoints U+D800 to U+DFFF are now rejected
112        if they appear, or are escaped, in patterns.
114    10. Get rid of a number of -Wunused-but-set-variable warnings.
116    11. The pattern /(?=(*:x))(q|)/ matches an empty string, and returns the mark
117        "x". The similar pattern /(?=(*:x))((*:y)q|)/ did not return a mark at all.
118        Oddly, Perl behaves the same way. PCRE has been fixed so that this pattern
119        also returns the mark "x". This bug applied to capturing parentheses,
120        non-capturing parentheses, and atomic parentheses. It also applied to some
121        assertions.
123    12. Stephen Kelly's patch to CMakeLists.txt allows it to parse the version
124        information out of configure.ac instead of relying on pcre.h.generic, which
125        is not stored in the repository.
127    13. Applied Dmitry V. Levin's patch for a more portable method for linking with
128        -lreadline.
130    14. ZH added PCRE_CONFIG_JITTARGET; added its output to pcretest -C.
132    15. Applied Graycode's patch to put the top-level frame on the stack rather
133        than the heap when not using the stack for recursion. This gives a
134        performance improvement in many cases when recursion is not deep.
136    16. Experimental code added to "pcretest -C" to output the stack frame size.
139    Version 8.21 12-Dec-2011
140    ------------------------
142    1.  Updating the JIT compiler.
144    2.  JIT compiler now supports OP_NCREF, OP_RREF and OP_NRREF. New test cases
145        are added as well.
147    3.  Fix cache-flush issue on PowerPC (It is still an experimental JIT port).
148        PCRE_EXTRA_TABLES is not suported by JIT, and should be checked before
149        calling _pcre_jit_exec. Some extra comments are added.
151    4.  (*MARK) settings inside atomic groups that do not contain any capturing
152        parentheses, for example, (?>a(*:m)), were not being passed out. This bug
153        was introduced by change 18 for 8.20.
155    5.  Supporting of \x, \U and \u in JavaScript compatibility mode based on the
156        ECMA-262 standard.
158    6.  Lookbehinds such as (?<=a{2}b) that contained a fixed repetition were
159        erroneously being rejected as "not fixed length" if PCRE_CASELESS was set.
160        This bug was probably introduced by change 9 of 8.13.
162    7.  While fixing 6 above, I noticed that a number of other items were being
163        incorrectly rejected as "not fixed length". This arose partly because newer
164        opcodes had not been added to the fixed-length checking code. I have (a)
165        corrected the bug and added tests for these items, and (b) arranged for an
166        error to occur if an unknown opcode is encountered while checking for fixed
167        length instead of just assuming "not fixed length". The items that were
168        rejected were: (*ACCEPT), (*COMMIT), (*FAIL), (*MARK), (*PRUNE), (*SKIP),
169        (*THEN), \h, \H, \v, \V, and single character negative classes with fixed
170        repetitions, e.g. [^a]{3}, with and without PCRE_CASELESS.
172    8.  A possessively repeated conditional subpattern such as (?(?=c)c|d)++ was
173        being incorrectly compiled and would have given unpredicatble results.
175    9.  A possessively repeated subpattern with minimum repeat count greater than
176        one behaved incorrectly. For example, (A){2,}+ behaved as if it was
177        (A)(A)++ which meant that, after a subsequent mismatch, backtracking into
178        the first (A) could occur when it should not.
180    10. Add a cast and remove a redundant test from the code.
182    11. JIT should use pcre_malloc/pcre_free for allocation.
184    12. Updated pcre-config so that it no longer shows -L/usr/lib, which seems
185        best practice nowadays, and helps with cross-compiling. (If the exec_prefix
186        is anything other than /usr, -L is still shown).
188    13. In non-UTF-8 mode, \C is now supported in lookbehinds and DFA matching.
190    14. Perl does not support \N without a following name in a [] class; PCRE now
191        also gives an error.
193    15. If a forward reference was repeated with an upper limit of around 2000,
194        it caused the error "internal error: overran compiling workspace". The
195        maximum number of forward references (including repeats) was limited by the
196        internal workspace, and dependent on the LINK_SIZE. The code has been
197        rewritten so that the workspace expands (via pcre_malloc) if necessary, and
198        the default depends on LINK_SIZE. There is a new upper limit (for safety)
199        of around 200,000 forward references. While doing this, I also speeded up
200        the filling in of repeated forward references.
202    16. A repeated forward reference in a pattern such as (a)(?2){2}(.) was
203        incorrectly expecting the subject to contain another "a" after the start.
205    17. When (*SKIP:name) is activated without a corresponding (*MARK:name) earlier
206        in the match, the SKIP should be ignored. This was not happening; instead
207        the SKIP was being treated as NOMATCH. For patterns such as
208        /A(*MARK:A)A+(*SKIP:B)Z|AAC/ this meant that the AAC branch was never
209        tested.
211    18. The behaviour of (*MARK), (*PRUNE), and (*THEN) has been reworked and is
212        now much more compatible with Perl, in particular in cases where the result
213        is a non-match for a non-anchored pattern. For example, if
214        /b(*:m)f|a(*:n)w/ is matched against "abc", the non-match returns the name
215        "m", where previously it did not return a name. A side effect of this
216        change is that for partial matches, the last encountered mark name is
217        returned, as for non matches. A number of tests that were previously not
218        Perl-compatible have been moved into the Perl-compatible test files. The
219        refactoring has had the pleasing side effect of removing one argument from
220        the match() function, thus reducing its stack requirements.
222    19. If the /S+ option was used in pcretest to study a pattern using JIT,
223        subsequent uses of /S (without +) incorrectly behaved like /S+.
225    21. Retrieve executable code size support for the JIT compiler and fixing
226        some warnings.
228    22. A caseless match of a UTF-8 character whose other case uses fewer bytes did
229        not work when the shorter character appeared right at the end of the
230        subject string.
232    23. Added some (int) casts to non-JIT modules to reduce warnings on 64-bit
233        systems.
235    24. Added PCRE_INFO_JITSIZE to pass on the value from (21) above, and also
236        output it when the /M option is used in pcretest.
238    25. The CheckMan script was not being included in the distribution. Also, added
239        an explicit "perl" to run Perl scripts from the PrepareRelease script
240        because this is reportedly needed in Windows.
242    26. If study data was being save in a file and studying had not found a set of
243        "starts with" bytes for the pattern, the data written to the file (though
244        never used) was taken from uninitialized memory and so caused valgrind to
245        complain.
247    27. Updated RunTest.bat as provided by Sheri Pierce.
249    28. Fixed a possible uninitialized memory bug in pcre_jit_compile.c.
251    29. Computation of memory usage for the table of capturing group names was
252        giving an unnecessarily large value.
255    Version 8.20 21-Oct-2011
256    ------------------------
258    1.  Change 37 of 8.13 broke patterns like [:a]...[b:] because it thought it had
259        a POSIX class. After further experiments with Perl, which convinced me that
260        Perl has bugs and confusions, a closing square bracket is no longer allowed
261        in a POSIX name. This bug also affected patterns with classes that started
262        with full stops.
264    2.  If a pattern such as /(a)b|ac/ is matched against "ac", there is no
265        captured substring, but while checking the failing first alternative,
266        substring 1 is temporarily captured. If the output vector supplied to
267        pcre_exec() was not big enough for this capture, the yield of the function
268        was still zero ("insufficient space for captured substrings"). This cannot
269        be totally fixed without adding another stack variable, which seems a lot
270        of expense for a edge case. However, I have improved the situation in cases
271        such as /(a)(b)x|abc/ matched against "abc", where the return code
272        indicates that fewer than the maximum number of slots in the ovector have
273        been set.
275    3.  Related to (2) above: when there are more back references in a pattern than
276        slots in the output vector, pcre_exec() uses temporary memory during
277        matching, and copies in the captures as far as possible afterwards. It was
278        using the entire output vector, but this conflicts with the specification
279        that only 2/3 is used for passing back captured substrings. Now it uses
280        only the first 2/3, for compatibility. This is, of course, another edge
281        case.
283    4.  Zoltan Herczeg's just-in-time compiler support has been integrated into the
284        main code base, and can be used by building with --enable-jit. When this is
285        done, pcregrep automatically uses it unless --disable-pcregrep-jit or the
286        runtime --no-jit option is given.
288    5.  When the number of matches in a pcre_dfa_exec() run exactly filled the
289        ovector, the return from the function was zero, implying that there were
290        other matches that did not fit. The correct "exactly full" value is now
291        returned.
293    6.  If a subpattern that was called recursively or as a subroutine contained
294        (*PRUNE) or any other control that caused it to give a non-standard return,
295        invalid errors such as "Error -26 (nested recursion at the same subject
296        position)" or even infinite loops could occur.
298    7.  If a pattern such as /a(*SKIP)c|b(*ACCEPT)|/ was studied, it stopped
299        computing the minimum length on reaching *ACCEPT, and so ended up with the
300        wrong value of 1 rather than 0. Further investigation indicates that
301        computing a minimum subject length in the presence of *ACCEPT is difficult
302        (think back references, subroutine calls), and so I have changed the code
303        so that no minimum is registered for a pattern that contains *ACCEPT.
305    8.  If (*THEN) was present in the first (true) branch of a conditional group,
306        it was not handled as intended. [But see 16 below.]
308    9.  Replaced RunTest.bat and CMakeLists.txt with improved versions provided by
309        Sheri Pierce.
311    10. A pathological pattern such as /(*ACCEPT)a/ was miscompiled, thinking that
312        the first byte in a match must be "a".
314    11. Change 17 for 8.13 increased the recursion depth for patterns like
315        /a(?:.)*?a/ drastically. I've improved things by remembering whether a
316        pattern contains any instances of (*THEN). If it does not, the old
317        optimizations are restored. It would be nice to do this on a per-group
318        basis, but at the moment that is not feasible.
320    12. In some environments, the output of pcretest -C is CRLF terminated. This
321        broke RunTest's code that checks for the link size. A single white space
322        character after the value is now allowed for.
324    13. RunTest now checks for the "fr" locale as well as for "fr_FR" and "french".
325        For "fr", it uses the Windows-specific input and output files.
327    14. If (*THEN) appeared in a group that was called recursively or as a
328        subroutine, it did not work as intended. [But see next item.]
330    15. Consider the pattern /A (B(*THEN)C) | D/ where A, B, C, and D are complex
331        pattern fragments (but not containing any | characters). If A and B are
332        matched, but there is a failure in C so that it backtracks to (*THEN), PCRE
333        was behaving differently to Perl. PCRE backtracked into A, but Perl goes to
334        D. In other words, Perl considers parentheses that do not contain any |
335        characters to be part of a surrounding alternative, whereas PCRE was
336        treading (B(*THEN)C) the same as (B(*THEN)C|(*FAIL)) -- which Perl handles
337        differently. PCRE now behaves in the same way as Perl, except in the case
338        of subroutine/recursion calls such as (?1) which have in any case always
339        been different (but PCRE had them first :-).
341    16. Related to 15 above: Perl does not treat the | in a conditional group as
342        creating alternatives. Such a group is treated in the same way as an
343        ordinary group without any | characters when processing (*THEN). PCRE has
344        been changed to match Perl's behaviour.
346    17. If a user had set PCREGREP_COLO(U)R to something other than 1:31, the
347        RunGrepTest script failed.
349    18. Change 22 for version 13 caused atomic groups to use more stack. This is
350        inevitable for groups that contain captures, but it can lead to a lot of
351        stack use in large patterns. The old behaviour has been restored for atomic
352        groups that do not contain any capturing parentheses.
354    19. If the PCRE_NO_START_OPTIMIZE option was set for pcre_compile(), it did not
355        suppress the check for a minimum subject length at run time. (If it was
356        given to pcre_exec() or pcre_dfa_exec() it did work.)
358    20. Fixed an ASCII-dependent infelicity in pcretest that would have made it
359        fail to work when decoding hex characters in data strings in EBCDIC
360        environments.
362    21. It appears that in at least one Mac OS environment, the isxdigit() function
363        is implemented as a macro that evaluates to its argument more than once,
364        contravening the C 90 Standard (I haven't checked a later standard). There
365        was an instance in pcretest which caused it to go wrong when processing
366        \x{...} escapes in subject strings. The has been rewritten to avoid using
367        things like p++ in the argument of isxdigit().
370    Version 8.13 16-Aug-2011
371    ------------------------
373    1.  The Unicode data tables have been updated to Unicode 6.0.0.
375    2.  Two minor typos in pcre_internal.h have been fixed.
377    3.  Added #include <string.h> to pcre_scanner_unittest.cc, pcrecpp.cc, and
378        pcrecpp_unittest.cc. They are needed for strcmp(), memset(), and strchr()
379        in some environments (e.g. Solaris 10/SPARC using Sun Studio 12U2).
381    4.  There were a number of related bugs in the code for matching backrefences
382        caselessly in UTF-8 mode when codes for the characters concerned were
383        different numbers of bytes. For example, U+023A and U+2C65 are an upper
384        and lower case pair, using 2 and 3 bytes, respectively. The main bugs were:
385        (a) A reference to 3 copies of a 2-byte code matched only 2 of a 3-byte
386        code. (b) A reference to 2 copies of a 3-byte code would not match 2 of a
387        2-byte code at the end of the subject (it thought there wasn't enough data
388        left).
390    5.  Comprehensive information about what went wrong is now returned by
391        pcre_exec() and pcre_dfa_exec() when the UTF-8 string check fails, as long
392        as the output vector has at least 2 elements. The offset of the start of
393        the failing character and a reason code are placed in the vector.
395    6.  When the UTF-8 string check fails for pcre_compile(), the offset that is
396        now returned is for the first byte of the failing character, instead of the
397        last byte inspected. This is an incompatible change, but I hope it is small
398        enough not to be a problem. It makes the returned offset consistent with
399        pcre_exec() and pcre_dfa_exec().
401    7.  pcretest now gives a text phrase as well as the error number when
402        pcre_exec() or pcre_dfa_exec() fails; if the error is a UTF-8 check
403        failure, the offset and reason code are output.
405    8.  When \R was used with a maximizing quantifier it failed to skip backwards
406        over a \r\n pair if the subsequent match failed. Instead, it just skipped
407        back over a single character (\n). This seems wrong (because it treated the
408        two characters as a single entity when going forwards), conflicts with the
409        documentation that \R is equivalent to (?>\r\n|\n|...etc), and makes the
410        behaviour of \R* different to (\R)*, which also seems wrong. The behaviour
411        has been changed.
413    9.  Some internal refactoring has changed the processing so that the handling
414        of the PCRE_CASELESS and PCRE_MULTILINE options is done entirely at compile
415        time (the PCRE_DOTALL option was changed this way some time ago: version
416        7.7 change 16). This has made it possible to abolish the OP_OPT op code,
417        which was always a bit of a fudge. It also means that there is one less
418        argument for the match() function, which reduces its stack requirements
419        slightly. This change also fixes an incompatibility with Perl: the pattern
420        (?i:([^b]))(?1) should not match "ab", but previously PCRE gave a match.
422    10. More internal refactoring has drastically reduced the number of recursive
423        calls to match() for possessively repeated groups such as (abc)++ when
424        using pcre_exec().
426    11. While implementing 10, a number of bugs in the handling of groups were
427        discovered and fixed:
429        (?<=(a)+) was not diagnosed as invalid (non-fixed-length lookbehind).
430        (a|)*(?1) gave a compile-time internal error.
431        ((a|)+)+  did not notice that the outer group could match an empty string.
432        (^a|^)+   was not marked as anchored.
433        (.*a|.*)+ was not marked as matching at start or after a newline.
435    12. Yet more internal refactoring has removed another argument from the match()
436        function. Special calls to this function are now indicated by setting a
437        value in a variable in the "match data" data block.
439    13. Be more explicit in pcre_study() instead of relying on "default" for
440        opcodes that mean there is no starting character; this means that when new
441        ones are added and accidentally left out of pcre_study(), testing should
442        pick them up.
444    14. The -s option of pcretest has been documented for ages as being an old
445        synonym of -m (show memory usage). I have changed it to mean "force study
446        for every regex", that is, assume /S for every regex. This is similar to -i
447        and -d etc. It's slightly incompatible, but I'm hoping nobody is still
448        using it. It makes it easier to run collections of tests with and without
449        study enabled, and thereby test pcre_study() more easily. All the standard
450        tests are now run with and without -s (but some patterns can be marked as
451        "never study" - see 20 below).
453    15. When (*ACCEPT) was used in a subpattern that was called recursively, the
454        restoration of the capturing data to the outer values was not happening
455        correctly.
457    16. If a recursively called subpattern ended with (*ACCEPT) and matched an
458        empty string, and PCRE_NOTEMPTY was set, pcre_exec() thought the whole
459        pattern had matched an empty string, and so incorrectly returned a no
460        match.
462    17. There was optimizing code for the last branch of non-capturing parentheses,
463        and also for the obeyed branch of a conditional subexpression, which used
464        tail recursion to cut down on stack usage. Unfortunately, now that there is
465        the possibility of (*THEN) occurring in these branches, tail recursion is
466        no longer possible because the return has to be checked for (*THEN). These
467        two optimizations have therefore been removed. [But see 8.20/11 above.]
469    18. If a pattern containing \R was studied, it was assumed that \R always
470        matched two bytes, thus causing the minimum subject length to be
471        incorrectly computed because \R can also match just one byte.
473    19. If a pattern containing (*ACCEPT) was studied, the minimum subject length
474        was incorrectly computed.
476    20. If /S is present twice on a test pattern in pcretest input, it now
477        *disables* studying, thereby overriding the use of -s on the command line
478        (see 14 above). This is necessary for one or two tests to keep the output
479        identical in both cases.
481    21. When (*ACCEPT) was used in an assertion that matched an empty string and
482        PCRE_NOTEMPTY was set, PCRE applied the non-empty test to the assertion.
484    22. When an atomic group that contained a capturing parenthesis was
485        successfully matched, but the branch in which it appeared failed, the
486        capturing was not being forgotten if a higher numbered group was later
487        captured. For example, /(?>(a))b|(a)c/ when matching "ac" set capturing
488        group 1 to "a", when in fact it should be unset. This applied to multi-
489        branched capturing and non-capturing groups, repeated or not, and also to
490        positive assertions (capturing in negative assertions does not happen
491        in PCRE) and also to nested atomic groups.
493    23. Add the ++ qualifier feature to pcretest, to show the remainder of the
494        subject after a captured substring, to make it easier to tell which of a
495        number of identical substrings has been captured.
497    24. The way atomic groups are processed by pcre_exec() has been changed so that
498        if they are repeated, backtracking one repetition now resets captured
499        values correctly. For example, if ((?>(a+)b)+aabab) is matched against
500        "aaaabaaabaabab" the value of captured group 2 is now correctly recorded as
501        "aaa". Previously, it would have been "a". As part of this code
502        refactoring, the way recursive calls are handled has also been changed.
504    25. If an assertion condition captured any substrings, they were not passed
505        back unless some other capturing happened later. For example, if
506        (?(?=(a))a) was matched against "a", no capturing was returned.
508    26. When studying a pattern that contained subroutine calls or assertions,
509        the code for finding the minimum length of a possible match was handling
510        direct recursions such as (xxx(?1)|yyy) but not mutual recursions (where
511        group 1 called group 2 while simultaneously a separate group 2 called group
512        1). A stack overflow occurred in this case. I have fixed this by limiting
513        the recursion depth to 10.
515    27. Updated RunTest.bat in the distribution to the version supplied by Tom
516        Fortmann. This supports explicit test numbers on the command line, and has
517        argument validation and error reporting.
519    28. An instance of \X with an unlimited repeat could fail if at any point the
520        first character it looked at was a mark character.
522    29. Some minor code refactoring concerning Unicode properties and scripts
523        should reduce the stack requirement of match() slightly.
525    30. Added the '=' option to pcretest to check the setting of unused capturing
526        slots at the end of the pattern, which are documented as being -1, but are
527        not included in the return count.
529    31. If \k was not followed by a braced, angle-bracketed, or quoted name, PCRE
530        compiled something random. Now it gives a compile-time error (as does
531        Perl).
533    32. A *MARK encountered during the processing of a positive assertion is now
534        recorded and passed back (compatible with Perl).
536    33. If --only-matching or --colour was set on a pcregrep call whose pattern
537        had alternative anchored branches, the search for a second match in a line
538        was done as if at the line start. Thus, for example, /^01|^02/ incorrectly
539        matched the line "0102" twice. The same bug affected patterns that started
540        with a backwards assertion. For example /\b01|\b02/ also matched "0102"
541        twice.
543    34. Previously, PCRE did not allow quantification of assertions. However, Perl
544        does, and because of capturing effects, quantifying parenthesized
545        assertions may at times be useful. Quantifiers are now allowed for
546        parenthesized assertions.
548    35. A minor code tidy in pcre_compile() when checking options for \R usage.
550    36. \g was being checked for fancy things in a character class, when it should
551        just be a literal "g".
553    37. PCRE was rejecting [:a[:digit:]] whereas Perl was not. It seems that the
554        appearance of a nested POSIX class supersedes an apparent external class.
555        For example, [:a[:digit:]b:] matches "a", "b", ":", or a digit. Also,
556        unescaped square brackets may also appear as part of class names. For
557        example, [:a[:abc]b:] gives unknown class "[:abc]b:]". PCRE now behaves
558        more like Perl. (But see 8.20/1 above.)
560    38. PCRE was giving an error for \N with a braced quantifier such as {1,} (this
561        was because it thought it was \N{name}, which is not supported).
563    39. Add minix to OS list not supporting the -S option in pcretest.
565    40. PCRE tries to detect cases of infinite recursion at compile time, but it
566        cannot analyze patterns in sufficient detail to catch mutual recursions
567        such as ((?1))((?2)). There is now a runtime test that gives an error if a
568        subgroup is called recursively as a subpattern for a second time at the
569        same position in the subject string. In previous releases this might have
570        been caught by the recursion limit, or it might have run out of stack.
572    41. A pattern such as /(?(R)a+|(?R)b)/ is quite safe, as the recursion can
573        happen only once. PCRE was, however incorrectly giving a compile time error
574        "recursive call could loop indefinitely" because it cannot analyze the
575        pattern in sufficient detail. The compile time test no longer happens when
576        PCRE is compiling a conditional subpattern, but actual runaway loops are
577        now caught at runtime (see 40 above).
579    42. It seems that Perl allows any characters other than a closing parenthesis
580        to be part of the NAME in (*MARK:NAME) and other backtracking verbs. PCRE
581        has been changed to be the same.
583    43. Updated configure.ac to put in more quoting round AC_LANG_PROGRAM etc. so
584        as not to get warnings when autogen.sh is called. Also changed
585        AC_PROG_LIBTOOL (deprecated) to LT_INIT (the current macro).
587    44. To help people who use pcregrep to scan files containing exceedingly long
588        lines, the following changes have been made:
590        (a) The default value of the buffer size parameter has been increased from
591            8K to 20K. (The actual buffer used is three times this size.)
593        (b) The default can be changed by ./configure --with-pcregrep-bufsize when
594            PCRE is built.
596        (c) A --buffer-size=n option has been added to pcregrep, to allow the size
597            to be set at run time.
599        (d) Numerical values in pcregrep options can be followed by K or M, for
600            example --buffer-size=50K.
602        (e) If a line being scanned overflows pcregrep's buffer, an error is now
603            given and the return code is set to 2.
605    45. Add a pointer to the latest mark to the callout data block.
607    46. The pattern /.(*F)/, when applied to "abc" with PCRE_PARTIAL_HARD, gave a
608        partial match of an empty string instead of no match. This was specific to
609        the use of ".".
611    47. The pattern /f.*/8s, when applied to "for" with PCRE_PARTIAL_HARD, gave a
612        complete match instead of a partial match. This bug was dependent on both
613        the PCRE_UTF8 and PCRE_DOTALL options being set.
615    48. For a pattern such as /\babc|\bdef/ pcre_study() was failing to set up the
616        starting byte set, because \b was not being ignored.
619    Version 8.12 15-Jan-2011
620    ------------------------
622    1.  Fixed some typos in the markup of the man pages, and wrote a script that
623        checks for such things as part of the documentation building process.
625    2.  On a big-endian 64-bit system, pcregrep did not correctly process the
626        --match-limit and --recursion-limit options (added for 8.11). In
627        particular, this made one of the standard tests fail. (The integer value
628        went into the wrong half of a long int.)
630    3.  If the --colour option was given to pcregrep with -v (invert match), it
631        did strange things, either producing crazy output, or crashing. It should,
632        of course, ignore a request for colour when reporting lines that do not
633        match.
635    4.  Another pcregrep bug caused similar problems if --colour was specified with
636        -M (multiline) and the pattern match finished with a line ending.
638    5.  In pcregrep, when a pattern that ended with a literal newline sequence was
639        matched in multiline mode, the following line was shown as part of the
640        match. This seems wrong, so I have changed it.
642    6.  Another pcregrep bug in multiline mode, when --colour was specified, caused
643        the check for further matches in the same line (so they could be coloured)
644        to overrun the end of the current line. If another match was found, it was
645        incorrectly shown (and then shown again when found in the next line).
647    7.  If pcregrep was compiled under Windows, there was a reference to the
648        function pcregrep_exit() before it was defined. I am assuming this was
649        the cause of the "error C2371: 'pcregrep_exit' : redefinition;" that was
650        reported by a user. I've moved the definition above the reference.
653    Version 8.11 10-Dec-2010
654    ------------------------
656    1.  (*THEN) was not working properly if there were untried alternatives prior
657        to it in the current branch. For example, in ((a|b)(*THEN)(*F)|c..) it
658        backtracked to try for "b" instead of moving to the next alternative branch
659        at the same level (in this case, to look for "c"). The Perl documentation
660        is clear that when (*THEN) is backtracked onto, it goes to the "next
661        alternative in the innermost enclosing group".
663    2.  (*COMMIT) was not overriding (*THEN), as it does in Perl. In a pattern
664        such as   (A(*COMMIT)B(*THEN)C|D)  any failure after matching A should
665        result in overall failure. Similarly, (*COMMIT) now overrides (*PRUNE) and
666        (*SKIP), (*SKIP) overrides (*PRUNE) and (*THEN), and (*PRUNE) overrides
667        (*THEN).
669    3.  If \s appeared in a character class, it removed the VT character from
670        the class, even if it had been included by some previous item, for example
671        in [\x00-\xff\s]. (This was a bug related to the fact that VT is not part
672        of \s, but is part of the POSIX "space" class.)
674    4.  A partial match never returns an empty string (because you can always
675        match an empty string at the end of the subject); however the checking for
676        an empty string was starting at the "start of match" point. This has been
677        changed to the "earliest inspected character" point, because the returned
678        data for a partial match starts at this character. This means that, for
679        example, /(?<=abc)def/ gives a partial match for the subject "abc"
680        (previously it gave "no match").
682    5.  Changes have been made to the way PCRE_PARTIAL_HARD affects the matching
683        of $, \z, \Z, \b, and \B. If the match point is at the end of the string,
684        previously a full match would be given. However, setting PCRE_PARTIAL_HARD
685        has an implication that the given string is incomplete (because a partial
686        match is preferred over a full match). For this reason, these items now
687        give a partial match in this situation. [Aside: previously, the one case
688        /t\b/ matched against "cat" with PCRE_PARTIAL_HARD set did return a partial
689        match rather than a full match, which was wrong by the old rules, but is
690        now correct.]
692    6.  There was a bug in the handling of #-introduced comments, recognized when
693        PCRE_EXTENDED is set, when PCRE_NEWLINE_ANY and PCRE_UTF8 were also set.
694        If a UTF-8 multi-byte character included the byte 0x85 (e.g. +U0445, whose
695        UTF-8 encoding is 0xd1,0x85), this was misinterpreted as a newline when
696        scanning for the end of the comment. (*Character* 0x85 is an "any" newline,
697        but *byte* 0x85 is not, in UTF-8 mode). This bug was present in several
698        places in pcre_compile().
700    7.  Related to (6) above, when pcre_compile() was skipping #-introduced
701        comments when looking ahead for named forward references to subpatterns,
702        the only newline sequence it recognized was NL. It now handles newlines
703        according to the set newline convention.
705    8.  SunOS4 doesn't have strerror() or strtoul(); pcregrep dealt with the
706        former, but used strtoul(), whereas pcretest avoided strtoul() but did not
707        cater for a lack of strerror(). These oversights have been fixed.
709    9.  Added --match-limit and --recursion-limit to pcregrep.
711    10. Added two casts needed to build with Visual Studio when NO_RECURSE is set.
713    11. When the -o option was used, pcregrep was setting a return code of 1, even
714        when matches were found, and --line-buffered was not being honoured.
716    12. Added an optional parentheses number to the -o and --only-matching options
717        of pcregrep.
719    13. Imitating Perl's /g action for multiple matches is tricky when the pattern
720        can match an empty string. The code to do it in pcretest and pcredemo
721        needed fixing:
723        (a) When the newline convention was "crlf", pcretest got it wrong, skipping
724            only one byte after an empty string match just before CRLF (this case
725            just got forgotten; "any" and "anycrlf" were OK).
727        (b) The pcretest code also had a bug, causing it to loop forever in UTF-8
728            mode when an empty string match preceded an ASCII character followed by
729            a non-ASCII character. (The code for advancing by one character rather
730            than one byte was nonsense.)
732        (c) The pcredemo.c sample program did not have any code at all to handle
733            the cases when CRLF is a valid newline sequence.
735    14. Neither pcre_exec() nor pcre_dfa_exec() was checking that the value given
736        as a starting offset was within the subject string. There is now a new
737        error, PCRE_ERROR_BADOFFSET, which is returned if the starting offset is
738        negative or greater than the length of the string. In order to test this,
739        pcretest is extended to allow the setting of negative starting offsets.
741    15. In both pcre_exec() and pcre_dfa_exec() the code for checking that the
742        starting offset points to the beginning of a UTF-8 character was
743        unnecessarily clumsy. I tidied it up.
745    16. Added PCRE_ERROR_SHORTUTF8 to make it possible to distinguish between a
746        bad UTF-8 sequence and one that is incomplete when using PCRE_PARTIAL_HARD.
748    17. Nobody had reported that the --include_dir option, which was added in
749        release 7.7 should have been called --include-dir (hyphen, not underscore)
750        for compatibility with GNU grep. I have changed it to --include-dir, but
751        left --include_dir as an undocumented synonym, and the same for
752        --exclude-dir, though that is not available in GNU grep, at least as of
753        release 2.5.4.
755    18. At a user's suggestion, the macros GETCHAR and friends (which pick up UTF-8
756        characters from a string of bytes) have been redefined so as not to use
757        loops, in order to improve performance in some environments. At the same
758        time, I abstracted some of the common code into auxiliary macros to save
759        repetition (this should not affect the compiled code).
761    19. If \c was followed by a multibyte UTF-8 character, bad things happened. A
762        compile-time error is now given if \c is not followed by an ASCII
763        character, that is, a byte less than 128. (In EBCDIC mode, the code is
764        different, and any byte value is allowed.)
766    20. Recognize (*NO_START_OPT) at the start of a pattern to set the PCRE_NO_
767        START_OPTIMIZE option, which is now allowed at compile time - but just
768        passed through to pcre_exec() or pcre_dfa_exec(). This makes it available
769        to pcregrep and other applications that have no direct access to PCRE
770        options. The new /Y option in pcretest sets this option when calling
771        pcre_compile().
773    21. Change 18 of release 8.01 broke the use of named subpatterns for recursive
774        back references. Groups containing recursive back references were forced to
775        be atomic by that change, but in the case of named groups, the amount of
776        memory required was incorrectly computed, leading to "Failed: internal
777        error: code overflow". This has been fixed.
779    22. Some patches to pcre_stringpiece.h, pcre_stringpiece_unittest.cc, and
780        pcretest.c, to avoid build problems in some Borland environments.
783    Version 8.10 25-Jun-2010
784    ------------------------
786    1.  Added support for (*MARK:ARG) and for ARG additions to PRUNE, SKIP, and
787        THEN.
789    2.  (*ACCEPT) was not working when inside an atomic group.
791    3.  Inside a character class, \B is treated as a literal by default, but
792        faulted if PCRE_EXTRA is set. This mimics Perl's behaviour (the -w option
793        causes the error). The code is unchanged, but I tidied the documentation.
795    4.  Inside a character class, PCRE always treated \R and \X as literals,
796        whereas Perl faults them if its -w option is set. I have changed PCRE so
797        that it faults them when PCRE_EXTRA is set.
799    5.  Added support for \N, which always matches any character other than
800        newline. (It is the same as "." when PCRE_DOTALL is not set.)
802    6.  When compiling pcregrep with newer versions of gcc which may have
803        FORTIFY_SOURCE set, several warnings "ignoring return value of 'fwrite',
804        declared with attribute warn_unused_result" were given. Just casting the
805        result to (void) does not stop the warnings; a more elaborate fudge is
806        needed. I've used a macro to implement this.
808    7.  Minor change to pcretest.c to avoid a compiler warning.
810    8.  Added four artifical Unicode properties to help with an option to make
811        \s etc use properties (see next item). The new properties are: Xan
812        (alphanumeric), Xsp (Perl space), Xps (POSIX space), and Xwd (word).
814    9.  Added PCRE_UCP to make \b, \d, \s, \w, and certain POSIX character classes
815        use Unicode properties. (*UCP) at the start of a pattern can be used to set
816        this option. Modified pcretest to add /W to test this facility. Added
817        REG_UCP to make it available via the POSIX interface.
819    10. Added --line-buffered to pcregrep.
821    11. In UTF-8 mode, if a pattern that was compiled with PCRE_CASELESS was
822        studied, and the match started with a letter with a code point greater than
823        127 whose first byte was different to the first byte of the other case of
824        the letter, the other case of this starting letter was not recognized
825        (#976).
827    12. If a pattern that was studied started with a repeated Unicode property
828        test, for example, \p{Nd}+, there was the theoretical possibility of
829        setting up an incorrect bitmap of starting bytes, but fortunately it could
830        not have actually happened in practice until change 8 above was made (it
831        added property types that matched character-matching opcodes).
833    13. pcre_study() now recognizes \h, \v, and \R when constructing a bit map of
834        possible starting bytes for non-anchored patterns.
836    14. Extended the "auto-possessify" feature of pcre_compile(). It now recognizes
837        \R, and also a number of cases that involve Unicode properties, both
838        explicit and implicit when PCRE_UCP is set.
840    15. If a repeated Unicode property match (e.g. \p{Lu}*) was used with non-UTF-8
841        input, it could crash or give wrong results if characters with values
842        greater than 0xc0 were present in the subject string. (Detail: it assumed
843        UTF-8 input when processing these items.)
845    16. Added a lot of (int) casts to avoid compiler warnings in systems where
846        size_t is 64-bit (#991).
848    17. Added a check for running out of memory when PCRE is compiled with
849        --disable-stack-for-recursion (#990).
851    18. If the last data line in a file for pcretest does not have a newline on
852        the end, a newline was missing in the output.
854    19. The default pcre_chartables.c file recognizes only ASCII characters (values
855        less than 128) in its various bitmaps. However, there is a facility for
856        generating tables according to the current locale when PCRE is compiled. It
857        turns out that in some environments, 0x85 and 0xa0, which are Unicode space
858        characters, are recognized by isspace() and therefore were getting set in
859        these tables, and indeed these tables seem to approximate to ISO 8859. This
860        caused a problem in UTF-8 mode when pcre_study() was used to create a list
861        of bytes that can start a match. For \s, it was including 0x85 and 0xa0,
862        which of course cannot start UTF-8 characters. I have changed the code so
863        that only real ASCII characters (less than 128) and the correct starting
864        bytes for UTF-8 encodings are set for characters greater than 127 when in
865        UTF-8 mode. (When PCRE_UCP is set - see 9 above - the code is different
866        altogether.)
868    20. Added the /T option to pcretest so as to be able to run tests with non-
869        standard character tables, thus making it possible to include the tests
870        used for 19 above in the standard set of tests.
872    21. A pattern such as (?&t)(?#()(?(DEFINE)(?<t>a)) which has a forward
873        reference to a subpattern the other side of a comment that contains an
874        opening parenthesis caused either an internal compiling error, or a
875        reference to the wrong subpattern.
878    Version 8.02 19-Mar-2010
879    ------------------------
881    1.  The Unicode data tables have been updated to Unicode 5.2.0.
883    2.  Added the option --libs-cpp to pcre-config, but only when C++ support is
884        configured.
886    3.  Updated the licensing terms in the pcregexp.pas file, as agreed with the
887        original author of that file, following a query about its status.
889    4.  On systems that do not have stdint.h (e.g. Solaris), check for and include
890        inttypes.h instead. This fixes a bug that was introduced by change 8.01/8.
892    5.  A pattern such as (?&t)*+(?(DEFINE)(?<t>.)) which has a possessive
893        quantifier applied to a forward-referencing subroutine call, could compile
894        incorrect code or give the error "internal error: previously-checked
895        referenced subpattern not found".
897    6.  Both MS Visual Studio and Symbian OS have problems with initializing
898        variables to point to external functions. For these systems, therefore,
899        pcre_malloc etc. are now initialized to local functions that call the
900        relevant global functions.
902    7.  There were two entries missing in the vectors called coptable and poptable
903        in pcre_dfa_exec.c. This could lead to memory accesses outsize the vectors.
904        I've fixed the data, and added a kludgy way of testing at compile time that
905        the lengths are correct (equal to the number of opcodes).
907    8.  Following on from 7, I added a similar kludge to check the length of the
908        eint vector in pcreposix.c.
910    9.  Error texts for pcre_compile() are held as one long string to avoid too
911        much relocation at load time. To find a text, the string is searched,
912        counting zeros. There was no check for running off the end of the string,
913        which could happen if a new error number was added without updating the
914        string.
916    10. \K gave a compile-time error if it appeared in a lookbehind assersion.
918    11. \K was not working if it appeared in an atomic group or in a group that
919        was called as a "subroutine", or in an assertion. Perl 5.11 documents that
920        \K is "not well defined" if used in an assertion. PCRE now accepts it if
921        the assertion is positive, but not if it is negative.
923    12. Change 11 fortuitously reduced the size of the stack frame used in the
924        "match()" function of pcre_exec.c by one pointer. Forthcoming
925        implementation of support for (*MARK) will need an extra pointer on the
926        stack; I have reserved it now, so that the stack frame size does not
927        decrease.
929    13. A pattern such as (?P<L1>(?P<L2>0)|(?P>L2)(?P>L1)) in which the only other
930        item in branch that calls a recursion is a subroutine call - as in the
931        second branch in the above example - was incorrectly given the compile-
932        time error "recursive call could loop indefinitely" because pcre_compile()
933        was not correctly checking the subroutine for matching a non-empty string.
935    14. The checks for overrunning compiling workspace could trigger after an
936        overrun had occurred. This is a "should never occur" error, but it can be
937        triggered by pathological patterns such as hundreds of nested parentheses.
938        The checks now trigger 100 bytes before the end of the workspace.
940    15. Fix typo in configure.ac: "srtoq" should be "strtoq".
943    Version 8.01 19-Jan-2010
944    ------------------------
946    1.  If a pattern contained a conditional subpattern with only one branch (in
947        particular, this includes all (*DEFINE) patterns), a call to pcre_study()
948        computed the wrong minimum data length (which is of course zero for such
949        subpatterns). This could cause incorrect "no match" results.
951    2.  For patterns such as (?i)a(?-i)b|c where an option setting at the start of
952        the pattern is reset in the first branch, pcre_compile() failed with
953        "internal error: code overflow at offset...". This happened only when
954        the reset was to the original external option setting. (An optimization
955        abstracts leading options settings into an external setting, which was the
956        cause of this.)
958    3.  A pattern such as ^(?!a(*SKIP)b) where a negative assertion contained one
959        of the verbs SKIP, PRUNE, or COMMIT, did not work correctly. When the
960        assertion pattern did not match (meaning that the assertion was true), it
961        was incorrectly treated as false if the SKIP had been reached during the
962        matching. This also applied to assertions used as conditions.
964    4.  If an item that is not supported by pcre_dfa_exec() was encountered in an
965        assertion subpattern, including such a pattern used as a condition,
966        unpredictable results occurred, instead of the error return
969    5.  The C++ GlobalReplace function was not working like Perl for the special
970        situation when an empty string is matched. It now does the fancy magic
971        stuff that is necessary.
973    6.  In pcre_internal.h, obsolete includes to setjmp.h and stdarg.h have been
974        removed. (These were left over from very, very early versions of PCRE.)
976    7.  Some cosmetic changes to the code to make life easier when compiling it
977        as part of something else:
979        (a) Change DEBUG to PCRE_DEBUG.
981        (b) In pcre_compile(), rename the member of the "branch_chain" structure
982            called "current" as "current_branch", to prevent a collision with the
983            Linux macro when compiled as a kernel module.
985        (c) In pcre_study(), rename the function set_bit() as set_table_bit(), to
986            prevent a collision with the Linux macro when compiled as a kernel
987            module.
989    8.  In pcre_compile() there are some checks for integer overflows that used to
990        cast potentially large values to (double). This has been changed to that
991        when building, a check for int64_t is made, and if it is found, it is used
992        instead, thus avoiding the use of floating point arithmetic. (There is no
993        other use of FP in PCRE.) If int64_t is not found, the fallback is to
994        double.
996    9.  Added two casts to avoid signed/unsigned warnings from VS Studio Express
997        2005 (difference between two addresses compared to an unsigned value).
999    10. Change the standard AC_CHECK_LIB test for libbz2 in configure.ac to a
1000        custom one, because of the following reported problem in Windows:
1002          - libbz2 uses the Pascal calling convention (WINAPI) for the functions
1003              under Win32.
1004          - The standard autoconf AC_CHECK_LIB fails to include "bzlib.h",
1005              therefore missing the function definition.
1006          - The compiler thus generates a "C" signature for the test function.
1007          - The linker fails to find the "C" function.
1008          - PCRE fails to configure if asked to do so against libbz2.
1010    11. When running libtoolize from libtool-2.2.6b as part of autogen.sh, these
1011        messages were output:
1013          Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
1014          rerunning libtoolize, to keep the correct libtool macros in-tree.
1015          Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
1017        I have done both of these things.
1019    12. Although pcre_dfa_exec() does not use nearly as much stack as pcre_exec()
1020        most of the time, it *can* run out if it is given a pattern that contains a
1021        runaway infinite recursion. I updated the discussion in the pcrestack man
1022        page.
1024    13. Now that we have gone to the x.xx style of version numbers, the minor
1025        version may start with zero. Using 08 or 09 is a bad idea because users
1026        might check the value of PCRE_MINOR in their code, and 08 or 09 may be
1027        interpreted as invalid octal numbers. I've updated the previous comment in
1028        configure.ac, and also added a check that gives an error if 08 or 09 are
1029        used.
1031    14. Change 8.00/11 was not quite complete: code had been accidentally omitted,
1032        causing partial matching to fail when the end of the subject matched \W
1033        in a UTF-8 pattern where \W was quantified with a minimum of 3.
1035    15. There were some discrepancies between the declarations in pcre_internal.h
1036        of _pcre_is_newline(), _pcre_was_newline(), and _pcre_valid_utf8() and
1037        their definitions. The declarations used "const uschar *" and the
1038        definitions used USPTR. Even though USPTR is normally defined as "const
1039        unsigned char *" (and uschar is typedeffed as "unsigned char"), it was
1040        reported that: "This difference in casting confuses some C++ compilers, for
1041        example, SunCC recognizes above declarations as different functions and
1042        generates broken code for hbpcre." I have changed the declarations to use
1043        USPTR.
1045    16. GNU libtool is named differently on some systems. The autogen.sh script now
1046        tries several variants such as glibtoolize (MacOSX) and libtoolize1x
1047        (FreeBSD).
1049    17. Applied Craig's patch that fixes an HP aCC compile error in pcre 8.00
1050        (strtoXX undefined when compiling pcrecpp.cc). The patch contains this
1051        comment: "Figure out how to create a longlong from a string: strtoll and
1052        equivalent. It's not enough to call AC_CHECK_FUNCS: hpux has a strtoll, for
1053        instance, but it only takes 2 args instead of 3!"
1055    18. A subtle bug concerned with back references has been fixed by a change of
1056        specification, with a corresponding code fix. A pattern such as
1057        ^(xa|=?\1a)+$ which contains a back reference inside the group to which it
1058        refers, was giving matches when it shouldn't. For example, xa=xaaa would
1059        match that pattern. Interestingly, Perl (at least up to 5.11.3) has the
1060        same bug. Such groups have to be quantified to be useful, or contained
1061        inside another quantified group. (If there's no repetition, the reference
1062        can never match.) The problem arises because, having left the group and
1063        moved on to the rest of the pattern, a later failure that backtracks into
1064        the group uses the captured value from the final iteration of the group
1065        rather than the correct earlier one. I have fixed this in PCRE by forcing
1066        any group that contains a reference to itself to be an atomic group; that
1067        is, there cannot be any backtracking into it once it has completed. This is
1068        similar to recursive and subroutine calls.
1071    Version 8.00 19-Oct-09
1072    ----------------------
1074    1.  The table for translating pcre_compile() error codes into POSIX error codes
1075        was out-of-date, and there was no check on the pcre_compile() error code
1076        being within the table. This could lead to an OK return being given in
1077        error.
1079    2.  Changed the call to open a subject file in pcregrep from fopen(pathname,
1080        "r") to fopen(pathname, "rb"), which fixed a problem with some of the tests
1081        in a Windows environment.
1083    3.  The pcregrep --count option prints the count for each file even when it is
1084        zero, as does GNU grep. However, pcregrep was also printing all files when
1085        --files-with-matches was added. Now, when both options are given, it prints
1086        counts only for those files that have at least one match. (GNU grep just
1087        prints the file name in this circumstance, but including the count seems
1088        more useful - otherwise, why use --count?) Also ensured that the
1089        combination -clh just lists non-zero counts, with no names.
1091    4.  The long form of the pcregrep -F option was incorrectly implemented as
1092        --fixed_strings instead of --fixed-strings. This is an incompatible change,
1093        but it seems right to fix it, and I didn't think it was worth preserving
1094        the old behaviour.
1096    5.  The command line items --regex=pattern and --regexp=pattern were not
1097        recognized by pcregrep, which required --regex pattern or --regexp pattern
1098        (with a space rather than an '='). The man page documented the '=' forms,
1099        which are compatible with GNU grep; these now work.
1101    6.  No libpcreposix.pc file was created for pkg-config; there was just
1102        libpcre.pc and libpcrecpp.pc. The omission has been rectified.
1104    7.  Added #ifndef SUPPORT_UCP into the pcre_ucd.c module, to reduce its size
1105        when UCP support is not needed, by modifying the Python script that
1106        generates it from Unicode data files. This should not matter if the module
1107        is correctly used as a library, but I received one complaint about 50K of
1108        unwanted data. My guess is that the person linked everything into his
1109        program rather than using a library. Anyway, it does no harm.
1111    8.  A pattern such as /\x{123}{2,2}+/8 was incorrectly compiled; the trigger
1112        was a minimum greater than 1 for a wide character in a possessive
1113        repetition. The same bug could also affect patterns like /(\x{ff}{0,2})*/8
1114        which had an unlimited repeat of a nested, fixed maximum repeat of a wide
1115        character. Chaos in the form of incorrect output or a compiling loop could
1116        result.
1118    9.  The restrictions on what a pattern can contain when partial matching is
1119        requested for pcre_exec() have been removed. All patterns can now be
1120        partially matched by this function. In addition, if there are at least two
1121        slots in the offset vector, the offset of the earliest inspected character
1122        for the match and the offset of the end of the subject are set in them when
1123        PCRE_ERROR_PARTIAL is returned.
1125    10. Partial matching has been split into two forms: PCRE_PARTIAL_SOFT, which is
1126        synonymous with PCRE_PARTIAL, for backwards compatibility, and
1127        PCRE_PARTIAL_HARD, which causes a partial match to supersede a full match,
1128        and may be more useful for multi-segment matching.
1130    11. Partial matching with pcre_exec() is now more intuitive. A partial match
1131        used to be given if ever the end of the subject was reached; now it is
1132        given only if matching could not proceed because another character was
1133        needed. This makes a difference in some odd cases such as Z(*FAIL) with the
1134        string "Z", which now yields "no match" instead of "partial match". In the
1135        case of pcre_dfa_exec(), "no match" is given if every matching path for the
1136        final character ended with (*FAIL).
1138    12. Restarting a match using pcre_dfa_exec() after a partial match did not work
1139        if the pattern had a "must contain" character that was already found in the
1140        earlier partial match, unless partial matching was again requested. For
1141        example, with the pattern /dog.(body)?/, the "must contain" character is
1142        "g". If the first part-match was for the string "dog", restarting with
1143        "sbody" failed. This bug has been fixed.
1145    13. The string returned by pcre_dfa_exec() after a partial match has been
1146        changed so that it starts at the first inspected character rather than the
1147        first character of the match. This makes a difference only if the pattern
1148        starts with a lookbehind assertion or \b or \B (\K is not supported by
1149        pcre_dfa_exec()). It's an incompatible change, but it makes the two
1150        matching functions compatible, and I think it's the right thing to do.
1152    14. Added a pcredemo man page, created automatically from the pcredemo.c file,
1153        so that the demonstration program is easily available in environments where
1154        PCRE has not been installed from source.
1156    15. Arranged to add -DPCRE_STATIC to cflags in libpcre.pc, libpcreposix.cp,
1157        libpcrecpp.pc and pcre-config when PCRE is not compiled as a shared
1158        library.
1160    16. Added REG_UNGREEDY to the pcreposix interface, at the request of a user.
1161        It maps to PCRE_UNGREEDY. It is not, of course, POSIX-compatible, but it
1162        is not the first non-POSIX option to be added. Clearly some people find
1163        these options useful.
1165    17. If a caller to the POSIX matching function regexec() passes a non-zero
1166        value for nmatch with a NULL value for pmatch, the value of
1167        nmatch is forced to zero.
1169    18. RunGrepTest did not have a test for the availability of the -u option of
1170        the diff command, as RunTest does. It now checks in the same way as
1171        RunTest, and also checks for the -b option.
1173    19. If an odd number of negated classes containing just a single character
1174        interposed, within parentheses, between a forward reference to a named
1175        subpattern and the definition of the subpattern, compilation crashed with
1176        an internal error, complaining that it could not find the referenced
1177        subpattern. An example of a crashing pattern is /(?&A)(([^m])(?<A>))/.
1178        [The bug was that it was starting one character too far in when skipping
1179        over the character class, thus treating the ] as data rather than
1180        terminating the class. This meant it could skip too much.]
1182    20. Added PCRE_NOTEMPTY_ATSTART in order to be able to correctly implement the
1183        /g option in pcretest when the pattern contains \K, which makes it possible
1184        to have an empty string match not at the start, even when the pattern is
1185        anchored. Updated pcretest and pcredemo to use this option.
1187    21. If the maximum number of capturing subpatterns in a recursion was greater
1188        than the maximum at the outer level, the higher number was returned, but
1189        with unset values at the outer level. The correct (outer level) value is
1190        now given.
1192    22. If (*ACCEPT) appeared inside capturing parentheses, previous releases of
1193        PCRE did not set those parentheses (unlike Perl). I have now found a way to
1194        make it do so. The string so far is captured, making this feature
1195        compatible with Perl.
1197    23. The tests have been re-organized, adding tests 11 and 12, to make it
1198        possible to check the Perl 5.10 features against Perl 5.10.
1200    24. Perl 5.10 allows subroutine calls in lookbehinds, as long as the subroutine
1201        pattern matches a fixed length string. PCRE did not allow this; now it
1202        does. Neither allows recursion.
1204    25. I finally figured out how to implement a request to provide the minimum
1205        length of subject string that was needed in order to match a given pattern.
1206        (It was back references and recursion that I had previously got hung up
1207        on.) This code has now been added to pcre_study(); it finds a lower bound
1208        to the length of subject needed. It is not necessarily the greatest lower
1209        bound, but using it to avoid searching strings that are too short does give
1210        some useful speed-ups. The value is available to calling programs via
1211        pcre_fullinfo().
1213    26. While implementing 25, I discovered to my embarrassment that pcretest had
1214        not been passing the result of pcre_study() to pcre_dfa_exec(), so the
1215        study optimizations had never been tested with that matching function.
1216        Oops. What is worse, even when it was passed study data, there was a bug in
1217        pcre_dfa_exec() that meant it never actually used it. Double oops. There
1218        were also very few tests of studied patterns with pcre_dfa_exec().
1220    27. If (?| is used to create subpatterns with duplicate numbers, they are now
1221        allowed to have the same name, even if PCRE_DUPNAMES is not set. However,
1222        on the other side of the coin, they are no longer allowed to have different
1223        names, because these cannot be distinguished in PCRE, and this has caused
1224        confusion. (This is a difference from Perl.)
1226    28. When duplicate subpattern names are present (necessarily with different
1227        numbers, as required by 27 above), and a test is made by name in a
1228        conditional pattern, either for a subpattern having been matched, or for
1229        recursion in such a pattern, all the associated numbered subpatterns are
1230        tested, and the overall condition is true if the condition is true for any
1231        one of them. This is the way Perl works, and is also more like the way
1232        testing by number works.
1235    Version 7.9 11-Apr-09
1236    ---------------------
1238    1.  When building with support for bzlib/zlib (pcregrep) and/or readline
1239        (pcretest), all targets were linked against these libraries. This included
1240        libpcre, libpcreposix, and libpcrecpp, even though they do not use these
1241        libraries. This caused unwanted dependencies to be created. This problem
1242        has been fixed, and now only pcregrep is linked with bzlib/zlib and only
1243        pcretest is linked with readline.
1245    2.  The "typedef int BOOL" in pcre_internal.h that was included inside the
1246        "#ifndef FALSE" condition by an earlier change (probably 7.8/18) has been
1247        moved outside it again, because FALSE and TRUE are already defined in AIX,
1248        but BOOL is not.
1250    3.  The pcre_config() function was treating the PCRE_MATCH_LIMIT and
1251        PCRE_MATCH_LIMIT_RECURSION values as ints, when they should be long ints.
1253    4.  The pcregrep documentation said spaces were inserted as well as colons (or
1254        hyphens) following file names and line numbers when outputting matching
1255        lines. This is not true; no spaces are inserted. I have also clarified the
1256        wording for the --colour (or --color) option.
1258    5.  In pcregrep, when --colour was used with -o, the list of matching strings
1259        was not coloured; this is different to GNU grep, so I have changed it to be
1260        the same.
1262    6.  When --colo(u)r was used in pcregrep, only the first matching substring in
1263        each matching line was coloured. Now it goes on to look for further matches
1264        of any of the test patterns, which is the same behaviour as GNU grep.
1266    7.  A pattern that could match an empty string could cause pcregrep to loop; it
1267        doesn't make sense to accept an empty string match in pcregrep, so I have
1268        locked it out (using PCRE's PCRE_NOTEMPTY option). By experiment, this
1269        seems to be how GNU grep behaves.
1271    8.  The pattern (?(?=.*b)b|^) was incorrectly compiled as "match must be at
1272        start or after a newline", because the conditional assertion was not being
1273        correctly handled. The rule now is that both the assertion and what follows
1274        in the first alternative must satisfy the test.
1276    9.  If auto-callout was enabled in a pattern with a conditional group whose
1277        condition was an assertion, PCRE could crash during matching, both with
1278        pcre_exec() and pcre_dfa_exec().
1280    10. The PCRE_DOLLAR_ENDONLY option was not working when pcre_dfa_exec() was
1281        used for matching.
1283    11. Unicode property support in character classes was not working for
1284        characters (bytes) greater than 127 when not in UTF-8 mode.
1286    12. Added the -M command line option to pcretest.
1288    14. Added the non-standard REG_NOTEMPTY option to the POSIX interface.
1290    15. Added the PCRE_NO_START_OPTIMIZE match-time option.
1292    16. Added comments and documentation about mis-use of no_arg in the C++
1293        wrapper.
1295    17. Implemented support for UTF-8 encoding in EBCDIC environments, a patch
1296        from Martin Jerabek that uses macro names for all relevant character and
1297        string constants.
1299    18. Added to pcre_internal.h two configuration checks: (a) If both EBCDIC and
1300        SUPPORT_UTF8 are set, give an error; (b) If SUPPORT_UCP is set without
1301        SUPPORT_UTF8, define SUPPORT_UTF8. The "configure" script handles both of
1302        these, but not everybody uses configure.
1304    19. A conditional group that had only one branch was not being correctly
1305        recognized as an item that could match an empty string. This meant that an
1306        enclosing group might also not be so recognized, causing infinite looping
1307        (and probably a segfault) for patterns such as ^"((?(?=[a])[^"])|b)*"$
1308        with the subject "ab", where knowledge that the repeated group can match
1309        nothing is needed in order to break the loop.
1311    20. If a pattern that was compiled with callouts was matched using pcre_dfa_
1312        exec(), but without supplying a callout function, matching went wrong.
1314    21. If PCRE_ERROR_MATCHLIMIT occurred during a recursion, there was a memory
1315        leak if the size of the offset vector was greater than 30. When the vector
1316        is smaller, the saved offsets during recursion go onto a local stack
1317        vector, but for larger vectors malloc() is used. It was failing to free
1318        when the recursion yielded PCRE_ERROR_MATCH_LIMIT (or any other "abnormal"
1319        error, in fact).
1321    22. There was a missing #ifdef SUPPORT_UTF8 round one of the variables in the
1322        heapframe that is used only when UTF-8 support is enabled. This caused no
1323        problem, but was untidy.
1325    23. Steven Van Ingelgem's patch to CMakeLists.txt to change the name
1326        CMAKE_BINARY_DIR to PROJECT_BINARY_DIR so that it works when PCRE is
1327        included within another project.
1329    24. Steven Van Ingelgem's patches to add more options to the CMake support,
1330        slightly modified by me:
1332          (a) PCRE_BUILD_TESTS can be set OFF not to build the tests, including
1333              not building pcregrep.
1335          (b) PCRE_BUILD_PCREGREP can be see OFF not to build pcregrep, but only
1336              if PCRE_BUILD_TESTS is also set OFF, because the tests use pcregrep.
1338    25. Forward references, both numeric and by name, in patterns that made use of
1339        duplicate group numbers, could behave incorrectly or give incorrect errors,
1340        because when scanning forward to find the reference group, PCRE was not
1341        taking into account the duplicate group numbers. A pattern such as
1342        ^X(?3)(a)(?|(b)|(q))(Y) is an example.
1344    26. Changed a few more instances of "const unsigned char *" to USPTR, making
1345        the feature of a custom pointer more persuasive (as requested by a user).
1347    27. Wrapped the definitions of fileno and isatty for Windows, which appear in
1348        pcretest.c, inside #ifndefs, because it seems they are sometimes already
1349        pre-defined.
1351    28. Added support for (*UTF8) at the start of a pattern.
1353    29. Arrange for flags added by the "release type" setting in CMake to be shown
1354        in the configuration summary.
1357    Version 7.8 05-Sep-08
1358    ---------------------
1360    1.  Replaced UCP searching code with optimized version as implemented for Ad
1361        Muncher (http://www.admuncher.com/) by Peter Kankowski. This uses a two-
1362        stage table and inline lookup instead of a function, giving speed ups of 2
1363        to 5 times on some simple patterns that I tested. Permission was given to
1364        distribute the MultiStage2.py script that generates the tables (it's not in
1365        the tarball, but is in the Subversion repository).
1367    2.  Updated the Unicode datatables to Unicode 5.1.0. This adds yet more
1368        scripts.
1370    3.  Change 12 for 7.7 introduced a bug in pcre_study() when a pattern contained
1371        a group with a zero qualifier. The result of the study could be incorrect,
1372        or the function might crash, depending on the pattern.
1374    4.  Caseless matching was not working for non-ASCII characters in back
1375        references. For example, /(\x{de})\1/8i was not matching \x{de}\x{fe}.
1376        It now works when Unicode Property Support is available.
1378    5.  In pcretest, an escape such as \x{de} in the data was always generating
1379        a UTF-8 string, even in non-UTF-8 mode. Now it generates a single byte in
1380        non-UTF-8 mode. If the value is greater than 255, it gives a warning about
1381        truncation.
1383    6.  Minor bugfix in pcrecpp.cc (change "" == ... to NULL == ...).
1385    7.  Added two (int) casts to pcregrep when printing the difference of two
1386        pointers, in case they are 64-bit values.
1388    8.  Added comments about Mac OS X stack usage to the pcrestack man page and to
1389        test 2 if it fails.
1391    9.  Added PCRE_CALL_CONVENTION just before the names of all exported functions,
1392        and a #define of that name to empty if it is not externally set. This is to
1393        allow users of MSVC to set it if necessary.
1395    10. The PCRE_EXP_DEFN macro which precedes exported functions was missing from
1396        the convenience functions in the pcre_get.c source file.
1398    11. An option change at the start of a pattern that had top-level alternatives
1399        could cause overwriting and/or a crash. This command provoked a crash in
1400        some environments:
1402          printf "/(?i)[\xc3\xa9\xc3\xbd]|[\xc3\xa9\xc3\xbdA]/8\n" | pcretest
1404        This potential security problem was recorded as CVE-2008-2371.
1406    12. For a pattern where the match had to start at the beginning or immediately
1407        after a newline (e.g /.*anything/ without the DOTALL flag), pcre_exec() and
1408        pcre_dfa_exec() could read past the end of the passed subject if there was
1409        no match. To help with detecting such bugs (e.g. with valgrind), I modified
1410        pcretest so that it places the subject at the end of its malloc-ed buffer.
1412    13. The change to pcretest in 12 above threw up a couple more cases when pcre_
1413        exec() might read past the end of the data buffer in UTF-8 mode.
1415    14. A similar bug to 7.3/2 existed when the PCRE_FIRSTLINE option was set and
1416        the data contained the byte 0x85 as part of a UTF-8 character within its
1417        first line. This applied both to normal and DFA matching.
1419    15. Lazy qualifiers were not working in some cases in UTF-8 mode. For example,
1420        /^[^d]*?$/8 failed to match "abc".
1422    16. Added a missing copyright notice to pcrecpp_internal.h.
1424    17. Make it more clear in the documentation that values returned from
1425        pcre_exec() in ovector are byte offsets, not character counts.
1427    18. Tidied a few places to stop certain compilers from issuing warnings.
1429    19. Updated the Virtual Pascal + BCC files to compile the latest v7.7, as
1430        supplied by Stefan Weber. I made a further small update for 7.8 because
1431        there is a change of source arrangements: the pcre_searchfuncs.c module is
1432        replaced by pcre_ucd.c.
1435    Version 7.7 07-May-08
1436    ---------------------
1438    1.  Applied Craig's patch to sort out a long long problem: "If we can't convert
1439        a string to a long long, pretend we don't even have a long long." This is
1440        done by checking for the strtoq, strtoll, and _strtoi64 functions.
1442    2.  Applied Craig's patch to pcrecpp.cc to restore ABI compatibility with
1443        pre-7.6 versions, which defined a global no_arg variable instead of putting
1444        it in the RE class. (See also #8 below.)
1446    3.  Remove a line of dead code, identified by coverity and reported by Nuno
1447        Lopes.
1449    4.  Fixed two related pcregrep bugs involving -r with --include or --exclude:
1451        (1) The include/exclude patterns were being applied to the whole pathnames
1452            of files, instead of just to the final components.
1454        (2) If there was more than one level of directory, the subdirectories were
1455            skipped unless they satisfied the include/exclude conditions. This is
1456            inconsistent with GNU grep (and could even be seen as contrary to the
1457            pcregrep specification - which I improved to make it absolutely clear).
1458            The action now is always to scan all levels of directory, and just
1459            apply the include/exclude patterns to regular files.
1461    5.  Added the --include_dir and --exclude_dir patterns to pcregrep, and used
1462        --exclude_dir in the tests to avoid scanning .svn directories.
1464    6.  Applied Craig's patch to the QuoteMeta function so that it escapes the
1465        NUL character as backslash + 0 rather than backslash + NUL, because PCRE
1466        doesn't support NULs in patterns.
1468    7.  Added some missing "const"s to declarations of static tables in
1469        pcre_compile.c and pcre_dfa_exec.c.
1471    8.  Applied Craig's patch to pcrecpp.cc to fix a problem in OS X that was
1472        caused by fix #2  above. (Subsequently also a second patch to fix the
1473        first patch. And a third patch - this was a messy problem.)
1475    9.  Applied Craig's patch to remove the use of push_back().
1477    10. Applied Alan Lehotsky's patch to add REG_STARTEND support to the POSIX
1478        matching function regexec().
1480    11. Added support for the Oniguruma syntax \g<name>, \g<n>, \g'name', \g'n',
1481        which, however, unlike Perl's \g{...}, are subroutine calls, not back
1482        references. PCRE supports relative numbers with this syntax (I don't think
1483        Oniguruma does).
1485    12. Previously, a group with a zero repeat such as (...){0} was completely
1486        omitted from the compiled regex. However, this means that if the group
1487        was called as a subroutine from elsewhere in the pattern, things went wrong
1488        (an internal error was given). Such groups are now left in the compiled
1489        pattern, with a new opcode that causes them to be skipped at execution
1490        time.
1492    13. Added the PCRE_JAVASCRIPT_COMPAT option. This makes the following changes
1493        to the way PCRE behaves:
1495        (a) A lone ] character is dis-allowed (Perl treats it as data).
1497        (b) A back reference to an unmatched subpattern matches an empty string
1498            (Perl fails the current match path).
1500        (c) A data ] in a character class must be notated as \] because if the
1501            first data character in a class is ], it defines an empty class. (In
1502            Perl it is not possible to have an empty class.) The empty class []
1503            never matches; it forces failure and is equivalent to (*FAIL) or (?!).
1504            The negative empty class [^] matches any one character, independently
1505            of the DOTALL setting.
1507    14. A pattern such as /(?2)[]a()b](abc)/ which had a forward reference to a
1508        non-existent subpattern following a character class starting with ']' and
1509        containing () gave an internal compiling error instead of "reference to
1510        non-existent subpattern". Fortunately, when the pattern did exist, the
1511        compiled code was correct. (When scanning forwards to check for the
1512        existencd of the subpattern, it was treating the data ']' as terminating
1513        the class, so got the count wrong. When actually compiling, the reference
1514        was subsequently set up correctly.)
1516    15. The "always fail" assertion (?!) is optimzed to (*FAIL) by pcre_compile;
1517        it was being rejected as not supported by pcre_dfa_exec(), even though
1518        other assertions are supported. I have made pcre_dfa_exec() support
1519        (*FAIL).
1521    16. The implementation of 13c above involved the invention of a new opcode,
1522        OP_ALLANY, which is like OP_ANY but doesn't check the /s flag. Since /s
1523        cannot be changed at match time, I realized I could make a small
1524        improvement to matching performance by compiling OP_ALLANY instead of
1525        OP_ANY for "." when DOTALL was set, and then removing the runtime tests
1526        on the OP_ANY path.
1528    17. Compiling pcretest on Windows with readline support failed without the
1529        following two fixes: (1) Make the unistd.h include conditional on
1530        HAVE_UNISTD_H; (2) #define isatty and fileno as _isatty and _fileno.
1532    18. Changed CMakeLists.txt and cmake/FindReadline.cmake to arrange for the
1533        ncurses library to be included for pcretest when ReadLine support is
1534        requested, but also to allow for it to be overridden. This patch came from
1535        Daniel Bergström.
1537    19. There was a typo in the file ucpinternal.h where f0_rangeflag was defined
1538        as 0x00f00000 instead of 0x00800000. Luckily, this would not have caused
1539        any errors with the current Unicode tables. Thanks to Peter Kankowski for
1540        spotting this.
1543    Version 7.6 28-Jan-08
1544    ---------------------
1546    1.  A character class containing a very large number of characters with
1547        codepoints greater than 255 (in UTF-8 mode, of course) caused a buffer
1548        overflow.
1550    2.  Patch to cut out the "long long" test in pcrecpp_unittest when
1551        HAVE_LONG_LONG is not defined.
1553    3.  Applied Christian Ehrlicher's patch to update the CMake build files to
1554        bring them up to date and include new features. This patch includes:
1556        - Fixed PH's badly added libz and libbz2 support.
1557        - Fixed a problem with static linking.
1558        - Added pcredemo. [But later removed - see 7 below.]
1559        - Fixed dftables problem and added an option.
1560        - Added a number of HAVE_XXX tests, including HAVE_WINDOWS_H and
1561            HAVE_LONG_LONG.
1562        - Added readline support for pcretest.
1563        - Added an listing of the option settings after cmake has run.
1565    4.  A user submitted a patch to Makefile that makes it easy to create
1566        "pcre.dll" under mingw when using Configure/Make. I added stuff to
1567        Makefile.am that cause it to include this special target, without
1568        affecting anything else. Note that the same mingw target plus all
1569        the other distribution libraries and programs are now supported
1570        when configuring with CMake (see 6 below) instead of with
1571        Configure/Make.
1573    5.  Applied Craig's patch that moves no_arg into the RE class in the C++ code.
1574        This is an attempt to solve the reported problem "pcrecpp::no_arg is not
1575        exported in the Windows port". It has not yet been confirmed that the patch
1576        solves the problem, but it does no harm.
1578    6.  Applied Sheri's patch to CMakeLists.txt to add NON_STANDARD_LIB_PREFIX and
1579        NON_STANDARD_LIB_SUFFIX for dll names built with mingw when configured
1580        with CMake, and also correct the comment about stack recursion.
1582    7.  Remove the automatic building of pcredemo from the ./configure system and
1583        from CMakeLists.txt. The whole idea of pcredemo.c is that it is an example
1584        of a program that users should build themselves after PCRE is installed, so
1585        building it automatically is not really right. What is more, it gave
1586        trouble in some build environments.
1588    8.  Further tidies to CMakeLists.txt from Sheri and Christian.
1591    Version 7.5 10-Jan-08
1592    ---------------------
1594    1.  Applied a patch from Craig: "This patch makes it possible to 'ignore'
1595        values in parens when parsing an RE using the C++ wrapper."
1597    2.  Negative specials like \S did not work in character classes in UTF-8 mode.
1598        Characters greater than 255 were excluded from the class instead of being
1599        included.
1601    3.  The same bug as (2) above applied to negated POSIX classes such as
1602        [:^space:].
1604    4.  PCRECPP_STATIC was referenced in pcrecpp_internal.h, but nowhere was it
1605        defined or documented. It seems to have been a typo for PCRE_STATIC, so
1606        I have changed it.
1608    5.  The construct (?&) was not diagnosed as a syntax error (it referenced the
1609        first named subpattern) and a construct such as (?&a) would reference the
1610        first named subpattern whose name started with "a" (in other words, the
1611        length check was missing). Both these problems are fixed. "Subpattern name
1612        expected" is now given for (?&) (a zero-length name), and this patch also
1613        makes it give the same error for \k'' (previously it complained that that
1614        was a reference to a non-existent subpattern).
1616    6.  The erroneous patterns (?+-a) and (?-+a) give different error messages;
1617        this is right because (?- can be followed by option settings as well as by
1618        digits. I have, however, made the messages clearer.
1620    7.  Patterns such as (?(1)a|b) (a pattern that contains fewer subpatterns
1621        than the number used in the conditional) now cause a compile-time error.
1622        This is actually not compatible with Perl, which accepts such patterns, but
1623        treats the conditional as always being FALSE (as PCRE used to), but it
1624        seems to me that giving a diagnostic is better.
1626    8.  Change "alphameric" to the more common word "alphanumeric" in comments
1627        and messages.
1629    9.  Fix two occurrences of "backslash" in comments that should have been
1630        "backspace".
1632    10. Remove two redundant lines of code that can never be obeyed (their function
1633        was moved elsewhere).
1635    11. The program that makes PCRE's Unicode character property table had a bug
1636        which caused it to generate incorrect table entries for sequences of
1637        characters that have the same character type, but are in different scripts.
1638        It amalgamated them into a single range, with the script of the first of
1639        them. In other words, some characters were in the wrong script. There were
1640        thirteen such cases, affecting characters in the following ranges:
1642          U+002b0 - U+002c1
1643          U+0060c - U+0060d
1644          U+0061e - U+00612
1645          U+0064b - U+0065e
1646          U+0074d - U+0076d
1647          U+01800 - U+01805
1648          U+01d00 - U+01d77
1649          U+01d9b - U+01dbf
1650          U+0200b - U+0200f
1651          U+030fc - U+030fe
1652          U+03260 - U+0327f
1653          U+0fb46 - U+0fbb1
1654          U+10450 - U+1049d
1656    12. The -o option (show only the matching part of a line) for pcregrep was not
1657        compatible with GNU grep in that, if there was more than one match in a
1658        line, it showed only the first of them. It now behaves in the same way as
1659        GNU grep.
1661    13. If the -o and -v options were combined for pcregrep, it printed a blank
1662        line for every non-matching line. GNU grep prints nothing, and pcregrep now
1663        does the same. The return code can be used to tell if there were any
1664        non-matching lines.
1666    14. Added --file-offsets and --line-offsets to pcregrep.
1668    15. The pattern (?=something)(?R) was not being diagnosed as a potentially
1669        infinitely looping recursion. The bug was that positive lookaheads were not
1670        being skipped when checking for a possible empty match (negative lookaheads
1671        and both kinds of lookbehind were skipped).
1673    16. Fixed two typos in the Windows-only code in pcregrep.c, and moved the
1674        inclusion of <windows.h> to before rather than after the definition of
1675        INVALID_FILE_ATTRIBUTES (patch from David Byron).
1677    17. Specifying a possessive quantifier with a specific limit for a Unicode
1678        character property caused pcre_compile() to compile bad code, which led at
1679        runtime to PCRE_ERROR_INTERNAL (-14). Examples of patterns that caused this
1680        are: /\p{Zl}{2,3}+/8 and /\p{Cc}{2}+/8. It was the possessive "+" that
1681        caused the error; without that there was no problem.
1683    18. Added --enable-pcregrep-libz and --enable-pcregrep-libbz2.
1685    19. Added --enable-pcretest-libreadline.
1687    20. In pcrecpp.cc, the variable 'count' was incremented twice in
1688        RE::GlobalReplace(). As a result, the number of replacements returned was
1689        double what it should be. I removed one of the increments, but Craig sent a
1690        later patch that removed the other one (the right fix) and added unit tests
1691        that check the return values (which was not done before).
1693    21. Several CMake things:
1695        (1) Arranged that, when cmake is used on Unix, the libraries end up with
1696            the names libpcre and libpcreposix, not just pcre and pcreposix.
1698        (2) The above change means that pcretest and pcregrep are now correctly
1699            linked with the newly-built libraries, not previously installed ones.
1703    22. In UTF-8 mode, with newline set to "any", a pattern such as .*a.*=.b.*
1704        crashed when matching a string such as a\x{2029}b (note that \x{2029} is a
1705        UTF-8 newline character). The key issue is that the pattern starts .*;
1706        this means that the match must be either at the beginning, or after a
1707        newline. The bug was in the code for advancing after a failed match and
1708        checking that the new position followed a newline. It was not taking
1709        account of UTF-8 characters correctly.
1711    23. PCRE was behaving differently from Perl in the way it recognized POSIX
1712        character classes. PCRE was not treating the sequence [:...:] as a
1713        character class unless the ... were all letters. Perl, however, seems to
1714        allow any characters between [: and :], though of course it rejects as
1715        unknown any "names" that contain non-letters, because all the known class
1716        names consist only of letters. Thus, Perl gives an error for [[:1234:]],
1717        for example, whereas PCRE did not - it did not recognize a POSIX character
1718        class. This seemed a bit dangerous, so the code has been changed to be
1719        closer to Perl. The behaviour is not identical to Perl, because PCRE will
1720        diagnose an unknown class for, for example, [[:l\ower:]] where Perl will
1721        treat it as [[:lower:]]. However, PCRE does now give "unknown" errors where
1722        Perl does, and where it didn't before.
1724    24. Rewrite so as to remove the single use of %n from pcregrep because in some
1725        Windows environments %n is disabled by default.
1728    Version 7.4 21-Sep-07
1729    ---------------------
1731    1.  Change 7.3/28 was implemented for classes by looking at the bitmap. This
1732        means that a class such as [\s] counted as "explicit reference to CR or
1733        LF". That isn't really right - the whole point of the change was to try to
1734        help when there was an actual mention of one of the two characters. So now
1735        the change happens only if \r or \n (or a literal CR or LF) character is
1736        encountered.
1738    2.  The 32-bit options word was also used for 6 internal flags, but the numbers
1739        of both had grown to the point where there were only 3 bits left.
1740        Fortunately, there was spare space in the data structure, and so I have
1741        moved the internal flags into a new 16-bit field to free up more option
1742        bits.
1744    3.  The appearance of (?J) at the start of a pattern set the DUPNAMES option,
1745        but did not set the internal JCHANGED flag - either of these is enough to
1746        control the way the "get" function works - but the PCRE_INFO_JCHANGED
1747        facility is supposed to tell if (?J) was ever used, so now (?J) at the
1748        start sets both bits.
1750    4.  Added options (at build time, compile time, exec time) to change \R from
1751        matching any Unicode line ending sequence to just matching CR, LF, or CRLF.
1753    5.  doc/pcresyntax.html was missing from the distribution.
1755    6.  Put back the definition of PCRE_ERROR_NULLWSLIMIT, for backward
1756        compatibility, even though it is no longer used.
1758    7.  Added macro for snprintf to pcrecpp_unittest.cc and also for strtoll and
1759        strtoull to pcrecpp.cc to select the available functions in WIN32 when the
1760        windows.h file is present (where different names are used). [This was
1761        reversed later after testing - see 16 below.]
1763    8.  Changed all #include <config.h> to #include "config.h". There were also
1764        some further <pcre.h> cases that I changed to "pcre.h".
1766    9.  When pcregrep was used with the --colour option, it missed the line ending
1767        sequence off the lines that it output.
1769    10. It was pointed out to me that arrays of string pointers cause lots of
1770        relocations when a shared library is dynamically loaded. A technique of
1771        using a single long string with a table of offsets can drastically reduce
1772        these. I have refactored PCRE in four places to do this. The result is
1773        dramatic:
1775          Originally:                          290
1776          After changing UCP table:            187
1777          After changing error message table:   43
1778          After changing table of "verbs"       36
1779          After changing table of Posix names   22
1781        Thanks to the folks working on Gregex for glib for this insight.
1783    11. --disable-stack-for-recursion caused compiling to fail unless -enable-
1784        unicode-properties was also set.
1786    12. Updated the tests so that they work when \R is defaulted to ANYCRLF.
1788    13. Added checks for ANY and ANYCRLF to pcrecpp.cc where it previously
1789        checked only for CRLF.
1791    14. Added casts to pcretest.c to avoid compiler warnings.
1793    15. Added Craig's patch to various pcrecpp modules to avoid compiler warnings.
1795    16. Added Craig's patch to remove the WINDOWS_H tests, that were not working,
1796        and instead check for _strtoi64 explicitly, and avoid the use of snprintf()
1797        entirely. This removes changes made in 7 above.
1799    17. The CMake files have been updated, and there is now more information about
1800        building with CMake in the NON-UNIX-USE document.
1803    Version 7.3 28-Aug-07
1804    ---------------------
1806     1. In the rejigging of the build system that eventually resulted in 7.1, the
1807        line "#include <pcre.h>" was included in pcre_internal.h. The use of angle
1808        brackets there is not right, since it causes compilers to look for an
1809        installed pcre.h, not the version that is in the source that is being
1810        compiled (which of course may be different). I have changed it back to:
1812          #include "pcre.h"
1814        I have a vague recollection that the change was concerned with compiling in
1815        different directories, but in the new build system, that is taken care of
1816        by the VPATH setting the Makefile.
1818     2. The pattern .*$ when run in not-DOTALL UTF-8 mode with newline=any failed
1819        when the subject happened to end in the byte 0x85 (e.g. if the last
1820        character was \x{1ec5}). *Character* 0x85 is one of the "any" newline
1821        characters but of course it shouldn't be taken as a newline when it is part
1822        of another character. The bug was that, for an unlimited repeat of . in
1823        not-DOTALL UTF-8 mode, PCRE was advancing by bytes rather than by
1824        characters when looking for a newline.
1826     3. A small performance improvement in the DOTALL UTF-8 mode .* case.
1828     4. Debugging: adjusted the names of opcodes for different kinds of parentheses
1829        in debug output.
1831     5. Arrange to use "%I64d" instead of "%lld" and "%I64u" instead of "%llu" for
1832        long printing in the pcrecpp unittest when running under MinGW.
1834     6. ESC_K was left out of the EBCDIC table.
1836     7. Change 7.0/38 introduced a new limit on the number of nested non-capturing
1837        parentheses; I made it 1000, which seemed large enough. Unfortunately, the
1838        limit also applies to "virtual nesting" when a pattern is recursive, and in
1839        this case 1000 isn't so big. I have been able to remove this limit at the
1840        expense of backing off one optimization in certain circumstances. Normally,
1841        when pcre_exec() would call its internal match() function recursively and
1842        immediately return the result unconditionally, it uses a "tail recursion"
1843        feature to save stack. However, when a subpattern that can match an empty
1844        string has an unlimited repetition quantifier, it no longer makes this
1845        optimization. That gives it a stack frame in which to save the data for
1846        checking that an empty string has been matched. Previously this was taken
1847        from the 1000-entry workspace that had been reserved. So now there is no
1848        explicit limit, but more stack is used.
1850     8. Applied Daniel's patches to solve problems with the import/export magic
1851        syntax that is required for Windows, and which was going wrong for the
1852        pcreposix and pcrecpp parts of the library. These were overlooked when this
1853        problem was solved for the main library.
1855     9. There were some crude static tests to avoid integer overflow when computing
1856        the size of patterns that contain repeated groups with explicit upper
1857        limits. As the maximum quantifier is 65535, the maximum group length was
1858        set at 30,000 so that the product of these two numbers did not overflow a
1859        32-bit integer. However, it turns out that people want to use groups that
1860        are longer than 30,000 bytes (though not repeat them that many times).
1861        Change 7.0/17 (the refactoring of the way the pattern size is computed) has
1862        made it possible to implement the integer overflow checks in a much more
1863        dynamic way, which I have now done. The artificial limitation on group
1864        length has been removed - we now have only the limit on the total length of
1865        the compiled pattern, which depends on the LINK_SIZE setting.
1867    10. Fixed a bug in the documentation for get/copy named substring when
1868        duplicate names are permitted. If none of the named substrings are set, the
1869        functions return PCRE_ERROR_NOSUBSTRING (7); the doc said they returned an
1870        empty string.
1872    11. Because Perl interprets \Q...\E at a high level, and ignores orphan \E
1873        instances, patterns such as [\Q\E] or [\E] or even [^\E] cause an error,
1874        because the ] is interpreted as the first data character and the
1875        terminating ] is not found. PCRE has been made compatible with Perl in this
1876        regard. Previously, it interpreted [\Q\E] as an empty class, and [\E] could
1877        cause memory overwriting.
1879    10. Like Perl, PCRE automatically breaks an unlimited repeat after an empty
1880        string has been matched (to stop an infinite loop). It was not recognizing
1881        a conditional subpattern that could match an empty string if that
1882        subpattern was within another subpattern. For example, it looped when
1883        trying to match  (((?(1)X|))*)  but it was OK with  ((?(1)X|)*)  where the
1884        condition was not nested. This bug has been fixed.
1886    12. A pattern like \X?\d or \P{L}?\d in non-UTF-8 mode could cause a backtrack
1887        past the start of the subject in the presence of bytes with the top bit
1888        set, for example "\x8aBCD".
1890    13. Added Perl 5.10 experimental backtracking controls (*FAIL), (*F), (*PRUNE),
1891        (*SKIP), (*THEN), (*COMMIT), and (*ACCEPT).
1893    14. Optimized (?!) to (*FAIL).
1895    15. Updated the test for a valid UTF-8 string to conform to the later RFC 3629.
1896        This restricts code points to be within the range 0 to 0x10FFFF, excluding
1897        the "low surrogate" sequence 0xD800 to 0xDFFF. Previously, PCRE allowed the
1898        full range 0 to 0x7FFFFFFF, as defined by RFC 2279. Internally, it still
1899        does: it's just the validity check that is more restrictive.
1901    16. Inserted checks for integer overflows during escape sequence (backslash)
1902        processing, and also fixed erroneous offset values for syntax errors during
1903        backslash processing.
1905    17. Fixed another case of looking too far back in non-UTF-8 mode (cf 12 above)
1906        for patterns like [\PPP\x8a]{1,}\x80 with the subject "A\x80".
1908    18. An unterminated class in a pattern like (?1)\c[ with a "forward reference"
1909        caused an overrun.
1911    19. A pattern like (?:[\PPa*]*){8,} which had an "extended class" (one with
1912        something other than just ASCII characters) inside a group that had an
1913        unlimited repeat caused a loop at compile time (while checking to see
1914        whether the group could match an empty string).
1916    20. Debugging a pattern containing \p or \P could cause a crash. For example,
1917        [\P{Any}] did so. (Error in the code for printing property names.)
1919    21. An orphan \E inside a character class could cause a crash.
1921    22. A repeated capturing bracket such as (A)? could cause a wild memory
1922        reference during compilation.
1924    23. There are several functions in pcre_compile() that scan along a compiled
1925        expression for various reasons (e.g. to see if it's fixed length for look
1926        behind). There were bugs in these functions when a repeated \p or \P was
1927        present in the pattern. These operators have additional parameters compared
1928        with \d, etc, and these were not being taken into account when moving along
1929        the compiled data. Specifically:
1931        (a) A item such as \p{Yi}{3} in a lookbehind was not treated as fixed
1932            length.
1934        (b) An item such as \pL+ within a repeated group could cause crashes or
1935            loops.
1937        (c) A pattern such as \p{Yi}+(\P{Yi}+)(?1) could give an incorrect
1938            "reference to non-existent subpattern" error.
1940        (d) A pattern like (\P{Yi}{2}\277)? could loop at compile time.
1942    24. A repeated \S or \W in UTF-8 mode could give wrong answers when multibyte
1943        characters were involved (for example /\S{2}/8g with "A\x{a3}BC").
1945    25. Using pcregrep in multiline, inverted mode (-Mv) caused it to loop.
1947    26. Patterns such as [\P{Yi}A] which include \p or \P and just one other
1948        character were causing crashes (broken optimization).
1950    27. Patterns such as (\P{Yi}*\277)* (group with possible zero repeat containing
1951        \p or \P) caused a compile-time loop.
1953    28. More problems have arisen in unanchored patterns when CRLF is a valid line
1954        break. For example, the unstudied pattern [\r\n]A does not match the string
1955        "\r\nA" because change 7.0/46 below moves the current point on by two
1956        characters after failing to match at the start. However, the pattern \nA
1957        *does* match, because it doesn't start till \n, and if [\r\n]A is studied,
1958        the same is true. There doesn't seem any very clean way out of this, but
1959        what I have chosen to do makes the common cases work: PCRE now takes note
1960        of whether there can be an explicit match for \r or \n anywhere in the
1961        pattern, and if so, 7.0/46 no longer applies. As part of this change,
1962        there's a new PCRE_INFO_HASCRORLF option for finding out whether a compiled
1963        pattern has explicit CR or LF references.
1965    29. Added (*CR) etc for changing newline setting at start of pattern.
1968    Version 7.2 19-Jun-07
1969    ---------------------
1971     1. If the fr_FR locale cannot be found for test 3, try the "french" locale,
1972        which is apparently normally available under Windows.
1974     2. Re-jig the pcregrep tests with different newline settings in an attempt
1975        to make them independent of the local environment's newline setting.
1977     3. Add code to configure.ac to remove -g from the CFLAGS default settings.
1979     4. Some of the "internals" tests were previously cut out when the link size
1980        was not 2, because the output contained actual offsets. The recent new
1981        "Z" feature of pcretest means that these can be cut out, making the tests
1982        usable with all link sizes.
1984     5. Implemented Stan Switzer's goto replacement for longjmp() when not using
1985        stack recursion. This gives a massive performance boost under BSD, but just
1986        a small improvement under Linux. However, it saves one field in the frame
1987        in all cases.
1989     6. Added more features from the forthcoming Perl 5.10:
1991        (a) (?-n) (where n is a string of digits) is a relative subroutine or
1992            recursion call. It refers to the nth most recently opened parentheses.
1994        (b) (?+n) is also a relative subroutine call; it refers to the nth next
1995            to be opened parentheses.
1997        (c) Conditions that refer to capturing parentheses can be specified
1998            relatively, for example, (?(-2)... or (?(+3)...
2000        (d) \K resets the start of the current match so that everything before
2001            is not part of it.
2003        (e) \k{name} is synonymous with \k<name> and \k'name' (.NET compatible).
2005        (f) \g{name} is another synonym - part of Perl 5.10's unification of
2006            reference syntax.
2008        (g) (?| introduces a group in which the numbering of parentheses in each
2009            alternative starts with the same number.
2011        (h) \h, \H, \v, and \V match horizontal and vertical whitespace.
2013     7. Added two new calls to pcre_fullinfo(): PCRE_INFO_OKPARTIAL and
2016     8. A pattern such as  (.*(.)?)*  caused pcre_exec() to fail by either not
2017        terminating or by crashing. Diagnosed by Viktor Griph; it was in the code
2018        for detecting groups that can match an empty string.
2020     9. A pattern with a very large number of alternatives (more than several
2021        hundred) was running out of internal workspace during the pre-compile
2022        phase, where pcre_compile() figures out how much memory will be needed. A
2023        bit of new cunning has reduced the workspace needed for groups with
2024        alternatives. The 1000-alternative test pattern now uses 12 bytes of
2025        workspace instead of running out of the 4096 that are available.
2027    10. Inserted some missing (unsigned int) casts to get rid of compiler warnings.
2029    11. Applied patch from Google to remove an optimization that didn't quite work.
2030        The report of the bug said:
2032          pcrecpp::RE("a*").FullMatch("aaa") matches, while
2033          pcrecpp::RE("a*?").FullMatch("aaa") does not, and
2034          pcrecpp::RE("a*?\\z").FullMatch("aaa") does again.
2036    12. If \p or \P was used in non-UTF-8 mode on a character greater than 127
2037        it matched the wrong number of bytes.
2040    Version 7.1 24-Apr-07
2041  ---------------------  ---------------------
2043   1. Applied Bob Rossi and Daniel G's patches to convert the build system to one   1. Applied Bob Rossi and Daniel G's patches to convert the build system to one
2044      that is more "standard", making use of automake and other autotools. There      that is more "standard", making use of automake and other Autotools. There
2045      is some re-arrangement of the files and adjustment of comments consequent      is some re-arrangement of the files and adjustment of comments consequent
2046      on this.      on this.
2048   2. Part of the patch fixed a problem with the pcregrep tests. The test of -r   2. Part of the patch fixed a problem with the pcregrep tests. The test of -r
2049      for recursive directory scanning broke on some systems because the files      for recursive directory scanning broke on some systems because the files
2050      are not scanned in any specific order and on different systems the order      are not scanned in any specific order and on different systems the order
2051      was different. A call to "sort" has been inserted into RunGrepTest for the      was different. A call to "sort" has been inserted into RunGrepTest for the
2052      approprate test as a short-term fix. In the longer term there may be an      approprate test as a short-term fix. In the longer term there may be an
2053      alternative.      alternative.
2055   3. I had an email from Eric Raymond about problems translating some of PCRE's   3. I had an email from Eric Raymond about problems translating some of PCRE's
2056      man pages to HTML (despite the fact that I distribute HTML pages, some      man pages to HTML (despite the fact that I distribute HTML pages, some
2057      people do their own conversions for various reasons). The problems      people do their own conversions for various reasons). The problems
2058      concerned the use of low-level troff macros .br and .in. I have therefore      concerned the use of low-level troff macros .br and .in. I have therefore
2059      removed all such uses from the man pages (some were redundant, some could      removed all such uses from the man pages (some were redundant, some could
2060      be replaced by .nf/.fi pairs). The maintain/132html script that I use to      be replaced by .nf/.fi pairs). The 132html script that I use to generate
2061      generate HTML has been updated to handle .nf/.fi and to complain if it      HTML has been updated to handle .nf/.fi and to complain if it encounters
2062      encounters .br or .in.      .br or .in.
2064   4. Updated comments in configure.ac that get placed in config.h.in and also   4. Updated comments in configure.ac that get placed in config.h.in and also
2065      arranged for config.h to be included in the distribution, for the benefit      arranged for config.h to be included in the distribution, with the name
2066      of those who have to compile without Autotools (compare pcre.h).      config.h.generic, for the benefit of those who have to compile without
2067        Autotools (compare pcre.h, which is now distributed as pcre.h.generic).
2068   5. Updated the support (such as it is) for Virtual Pascal, thanks to Stefan  
2069      Weber: (1) pcre_internal.h was missing some function renames; (2) updated   5. Updated the support (such as it is) for Virtual Pascal, thanks to Stefan
2070      makevp.bat for the current PCRE, using the additional files !compile.txt,      Weber: (1) pcre_internal.h was missing some function renames; (2) updated
2071      !linklib.txt, and pcregexp.pas.      makevp.bat for the current PCRE, using the additional files
2072        makevp_c.txt, makevp_l.txt, and pcregexp.pas.
2073   6. A Windows user reported a minor discrepancy with test 2, which turned out  
2074      to be caused by a trailing space on an input line that had got lost in his   6. A Windows user reported a minor discrepancy with test 2, which turned out
2075        to be caused by a trailing space on an input line that had got lost in his
2076      copy. The trailing space was an accident, so I've just removed it.      copy. The trailing space was an accident, so I've just removed it.
2078     7. Add -Wl,-R... flags in pcre-config.in for *BSD* systems, as I'm told
2079        that is needed.
2081     8. Mark ucp_table (in ucptable.h) and ucp_gentype (in pcre_ucp_searchfuncs.c)
2082        as "const" (a) because they are and (b) because it helps the PHP
2083        maintainers who have recently made a script to detect big data structures
2084        in the php code that should be moved to the .rodata section. I remembered
2085        to update Builducptable as well, so it won't revert if ucptable.h is ever
2086        re-created.
2088     9. Added some extra #ifdef SUPPORT_UTF8 conditionals into pcretest.c,
2089        pcre_printint.src, pcre_compile.c, pcre_study.c, and pcre_tables.c, in
2090        order to be able to cut out the UTF-8 tables in the latter when UTF-8
2091        support is not required. This saves 1.5-2K of code, which is important in
2092        some applications.
2094        Later: more #ifdefs are needed in pcre_ord2utf8.c and pcre_valid_utf8.c
2095        so as not to refer to the tables, even though these functions will never be
2096        called when UTF-8 support is disabled. Otherwise there are problems with a
2097        shared library.
2099    10. Fixed two bugs in the emulated memmove() function in pcre_internal.h:
2101        (a) It was defining its arguments as char * instead of void *.
2103        (b) It was assuming that all moves were upwards in memory; this was true
2104            a long time ago when I wrote it, but is no longer the case.
2106        The emulated memove() is provided for those environments that have neither
2107        memmove() nor bcopy(). I didn't think anyone used it these days, but that
2108        is clearly not the case, as these two bugs were recently reported.
2110    11. The script PrepareRelease is now distributed: it calls 132html, CleanTxt,
2111        and Detrail to create the HTML documentation, the .txt form of the man
2112        pages, and it removes trailing spaces from listed files. It also creates
2113        pcre.h.generic and config.h.generic from pcre.h and config.h. In the latter
2114        case, it wraps all the #defines with #ifndefs. This script should be run
2115        before "make dist".
2117    12. Fixed two fairly obscure bugs concerned with quantified caseless matching
2118        with Unicode property support.
2120        (a) For a maximizing quantifier, if the two different cases of the
2121            character were of different lengths in their UTF-8 codings (there are
2122            some cases like this - I found 11), and the matching function had to
2123            back up over a mixture of the two cases, it incorrectly assumed they
2124            were both the same length.
2126        (b) When PCRE was configured to use the heap rather than the stack for
2127            recursion during matching, it was not correctly preserving the data for
2128            the other case of a UTF-8 character when checking ahead for a match
2129            while processing a minimizing repeat. If the check also involved
2130            matching a wide character, but failed, corruption could cause an
2131            erroneous result when trying to check for a repeat of the original
2132            character.
2134    13. Some tidying changes to the testing mechanism:
2136        (a) The RunTest script now detects the internal link size and whether there
2137            is UTF-8 and UCP support by running ./pcretest -C instead of relying on
2138            values substituted by "configure". (The RunGrepTest script already did
2139            this for UTF-8.) The configure.ac script no longer substitutes the
2140            relevant variables.
2142        (b) The debugging options /B and /D in pcretest show the compiled bytecode
2143            with length and offset values. This means that the output is different
2144            for different internal link sizes. Test 2 is skipped for link sizes
2145            other than 2 because of this, bypassing the problem. Unfortunately,
2146            there was also a test in test 3 (the locale tests) that used /B and
2147            failed for link sizes other than 2. Rather than cut the whole test out,
2148            I have added a new /Z option to pcretest that replaces the length and
2149            offset values with spaces. This is now used to make test 3 independent
2150            of link size. (Test 2 will be tidied up later.)
2152    14. If erroroffset was passed as NULL to pcre_compile, it provoked a
2153        segmentation fault instead of returning the appropriate error message.
2155    15. In multiline mode when the newline sequence was set to "any", the pattern
2156        ^$ would give a match between the \r and \n of a subject such as "A\r\nB".
2157        This doesn't seem right; it now treats the CRLF combination as the line
2158        ending, and so does not match in that case. It's only a pattern such as ^$
2159        that would hit this one: something like ^ABC$ would have failed after \r
2160        and then tried again after \r\n.
2162    16. Changed the comparison command for RunGrepTest from "diff -u" to "diff -ub"
2163        in an attempt to make files that differ only in their line terminators
2164        compare equal. This works on Linux.
2166    17. Under certain error circumstances pcregrep might try to free random memory
2167        as it exited. This is now fixed, thanks to valgrind.
2169    19. In pcretest, if the pattern /(?m)^$/g<any> was matched against the string
2170        "abc\r\n\r\n", it found an unwanted second match after the second \r. This
2171        was because its rules for how to advance for /g after matching an empty
2172        string at the end of a line did not allow for this case. They now check for
2173        it specially.
2175    20. pcretest is supposed to handle patterns and data of any length, by
2176        extending its buffers when necessary. It was getting this wrong when the
2177        buffer for a data line had to be extended.
2179    21. Added PCRE_NEWLINE_ANYCRLF which is like ANY, but matches only CR, LF, or
2180        CRLF as a newline sequence.
2182    22. Code for handling Unicode properties in pcre_dfa_exec() wasn't being cut
2183        out by #ifdef SUPPORT_UCP. This did no harm, as it could never be used, but
2184        I have nevertheless tidied it up.
2186    23. Added some casts to kill warnings from HP-UX ia64 compiler.
2188    24. Added a man page for pcre-config.
2191  Version 7.0 19-Dec-06  Version 7.0 19-Dec-06
2192  ---------------------  ---------------------

Removed from v.102  
changed lines
  Added in v.949

  ViewVC Help
Powered by ViewVC 1.1.5