ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 1345 by ph10, Tue Jul 2 17:52:28 2013 UTC revision 1394 by ph10, Sat Nov 9 09:17:20 2013 UTC
# Line 17  Version 8.34 xx-xxxx-201x Line 17  Version 8.34 xx-xxxx-201x
18  3.  Make a small performance improvement in strlen16() and strlen32() in  3.  Make a small performance improvement in strlen16() and strlen32() in
19      pcretest.      pcretest.
21    4.  Change 36 for 8.33 left some unreachable statements in pcre_exec.c,
22        detected by the Solaris compiler (gcc doesn't seem to be able to diagnose
23        these cases). There was also one in pcretest.c.
25    5.  Cleaned up a "may be uninitialized" compiler warning in pcre_exec.c.
27    6.  In UTF mode, the code for checking whether a group could match an empty
28        string (which is used for indefinitely repeated groups to allow for
29        breaking an infinite loop) was broken when the group contained a repeated
30        negated single-character class with a character that occupied more than one
31        data item and had a minimum repetition of zero (for example, [^\x{100}]* in
32        UTF-8 mode). The effect was undefined: the group might or might not be
33        deemed as matching an empty string, or the program might have crashed.
35    7.  The code for checking whether a group could match an empty string was not
36        recognizing that \h, \H, \v, \V, and \R must match a character.
38    8.  Implemented PCRE_INFO_MATCH_EMPTY, which yields 1 if the pattern can match
39        an empty string. If it can, pcretest shows this in its information output.
41    9.  Fixed two related bugs that applied to Unicode extended grapheme clusters
42        that were repeated with a maximizing qualifier (e.g. \X* or \X{2,5}) when
43        matched by pcre_exec() without using JIT:
45        (a) If the rest of the pattern did not match after a maximal run of
46            grapheme clusters, the code for backing up to try with fewer of them
47            did not always back up over a full grapheme when characters that do not
48            have the modifier quality were involved, e.g. Hangul syllables.
50        (b) If the match point in a subject started with modifier character, and
51            there was no match, the code could incorrectly back up beyond the match
52            point, and potentially beyond the first character in the subject,
53            leading to a segfault or an incorrect match result.
55    10. A conditional group with an assertion condition could lead to PCRE
56        recording an incorrect first data item for a match if no other first data
57        item was recorded. For example, the pattern (?(?=ab)ab) recorded "a" as a
58        first data item, and therefore matched "ca" after "c" instead of at the
59        start.
61    11. Change 40 for 8.33 (allowing pcregrep to find empty strings) showed up a
62        bug that caused the command "echo a | ./pcregrep -M '|a'" to loop.
64    12. The source of pcregrep now includes z/OS-specific code so that it can be
65        compiled for z/OS as part of the special z/OS distribution.
67    13. Added the -T and -TM options to pcretest.
69    14. The code in pcre_compile.c for creating the table of named capturing groups
70        has been refactored. Instead of creating the table dynamically during the
71        actual compiling pass, the information is remembered during the pre-compile
72        pass (on the stack unless there are more than 20 named groups, in which
73        case malloc() is used) and the whole table is created before the actual
74        compile happens. This has simplified the code (it is now nearly 150 lines
75        shorter) and prepared the way for better handling of references to groups
76        with duplicate names.
78    15. A back reference to a named subpattern when there is more than one of the
79        same name now checks them in the order in which they appear in the pattern.
80        The first one that is set is used for the reference. Previously only the
81        first one was inspected. This change makes PCRE more compatible with Perl.
83    16. Unicode character properties were updated from Unicode 6.3.0.
85    17. The compile-time code for auto-possessification has been refactored, based
86        on a patch by Zoltan Herczeg. It now happens after instead of during
87        compilation. The code is cleaner, and more cases are handled. The option
88        PCRE_NO_AUTO_POSSESSIFY is added for testing purposes, and the -O and /O
89        options in pcretest are provided to set it.
91    18. The character VT has been added to the set of characters that match \s and
92        are generally treated as white space, following this same change in Perl
93        5.18. There is now no difference between "Perl space" and "POSIX space".
95    19. The code for checking named groups as conditions, either for being set or
96        for being recursed, has been refactored (this is related to 14 and 15
97        above). Processing unduplicated named groups should now be as fast at
98        numerical groups, and processing duplicated groups should be faster than
99        before.
101    20. Two patches to the CMake build system, by Alexander Barkov:
103          (1) Replace the "source" command by "." in CMakeLists.txt because
104              "source" is a bash-ism.
106          (2) Add missing HAVE_STDINT_H and HAVE_INTTYPES_H to config-cmake.h.in;
107              without these the CMake build does not work on Solaris.
109    21. Perl has changed its handling of \8 and \9. If there is no previously
110        encountered capturing group of those numbers, they are treated as the
111        literal characters 8 and 9 instead of a binary zero followed by the
112        literals. PCRE now does the same.
114    22. Following Perl, added \o{} to specify codepoints in octal, making it
115        possible to specify values greater than 0777 and also making them
116        unambiguous.
118    23. Perl now gives an error for missing closing braces after \x{... instead of
119        treating the string as literal. PCRE now does the same.
121    24. RunTest used to grumble if an inappropriate test was selected explicitly,
122        but just skip it when running all tests. This make it awkward to run ranges
123        of tests when one of them was inappropriate. Now it just skips any
124        inappropriate tests, as it always did when running all tests.
126    25. If PCRE_AUTO_CALLOUT and PCRE_UCP were set for a pattern that contained
127        character types such as \d or \w, too many callouts were inserted, and the
128        data that they returned was rubbish.
130    26. In UCP mode, \s was not matching two of the characters that Perl matches,
131        namely NEL (U+0085) and MONGOLIAN VOWEL SEPARATOR (U+180E), though they
132        were matched by \h. The code has now been refactored so that the lists of
133        the horizontal and vertical whitespace characters used for \h and \v (which
134        are defined only in one place) are now also used for \s.
136    27. Add JIT support for the 64 bit TileGX architecture.
137        Patch by Jiong Wang (Tilera Corporation).
139    28. Possessive quantifiers for classes (both explicit and automatically
140        generated) now use special opcodes instead of wrapping in ONCE brackets.
142    29. Whereas an item such as A{4}+ ignored the possessivenes of the quantifier
143        (because it's meaningless), this was not happening when PCRE_CASELESS was
144        set. Not wrong, but inefficient.
146    30. Updated perltest.pl to add /u (force Unicode mode) when /W (use Unicode
147        properties for \w, \d, etc) is present in a test regex. Otherwise if the
148        test contains no characters greater than 255, Perl doesn't realise it
149        should be using Unicode semantics.
151    31. Upgraded the handling of the POSIX classes [:graph:], [:print:], and
152        [:punct:] when PCRE_UCP is set so as to include the same characters as Perl
153        does in Unicode mode.
155    32. Added the "forbid" facility to pcretest so that putting tests into the
156        wrong test files can sometimes be quickly detected.
158    33. There is now a limit (default 250) on the depth of nesting of parentheses.
159        This limit is imposed to control the amount of system stack used at compile
160        time. It can be changed at build time by --with-parens-nest-limit=xxx or
161        the equivalent in CMake.
163    34. Character classes such as [A-\d] or [a-[:digit:]] now cause compile-time
164        errors. Perl warns for these when in warning mode, but PCRE has no facility
165        for giving warnings.
167    35. Change 34 for 8.13 allowed quantifiers on assertions, because Perl does.
168        However, this was not working for (?!) because it is optimized to (*FAIL),
169        for which PCRE does not allow quantifiers. The optimization is now disabled
170        when a quantifier follows (?!). I can't see any use for this, but it makes
171        things uniform.
173    36. Perl no longer allows group names to start with digits, so I have made this
174        change also in PCRE. It simplifies the code a bit.
177  Version 8.33 28-May-2013  Version 8.33 28-May-2013
178  --------------------------  ------------------------
180  1.  Added 'U' to some constants that are compared to unsigned integers, to  1.  Added 'U' to some constants that are compared to unsigned integers, to
181      avoid compiler signed/unsigned warnings. Added (int) casts to unsigned      avoid compiler signed/unsigned warnings. Added (int) casts to unsigned

Removed from v.1345  
changed lines
  Added in v.1394

  ViewVC Help
Powered by ViewVC 1.1.5