/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 659 by ph10, Tue Aug 16 09:48:29 2011 UTC revision 1334 by ph10, Wed May 15 16:53:18 2013 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
3    
4    Version 8.33 28-April-2013
5    --------------------------
6    
7    1.  Added 'U' to some constants that are compared to unsigned integers, to
8        avoid compiler signed/unsigned warnings. Added (int) casts to unsigned
9        variables that are added to signed variables, to ensure the result is
10        signed and can be negated.
11    
12    2.  Applied patch by Daniel Richard G for quashing MSVC warnings to the
13        CMake config files.
14    
15    3.  Revise the creation of config.h.generic so that all boolean macros are
16        #undefined, whereas non-boolean macros are #ifndef/#endif-ed. This makes
17        overriding via -D on the command line possible.
18    
19    4.  Changing the definition of the variable "op" in pcre_exec.c from pcre_uchar
20        to unsigned int is reported to make a quite noticeable speed difference in
21        a specific Windows environment. Testing on Linux did also appear to show
22        some benefit (and it is clearly not harmful). Also fixed the definition of
23        Xop which should be unsigned.
24    
25    5.  Related to (4), changing the definition of the intermediate variable cc
26        in repeated character loops from pcre_uchar to pcre_uint32 also gave speed
27        improvements.
28    
29    6.  Fix forward search in JIT when link size is 3 or greater. Also removed some
30        unnecessary spaces.
31    
32    7.  Adjust autogen.sh and configure.ac to lose warnings given by automake 1.12
33        and later.
34    
35    8.  Fix two buffer over read issues in 16 and 32 bit modes. Affects JIT only.
36    
37    9.  Optimizing fast_forward_start_bits in JIT.
38    
39    10. Adding experimental support for callouts in JIT, and fixing some
40        issues revealed during this work. Namely:
41    
42        (a) Unoptimized capturing brackets incorrectly reset on backtrack.
43    
44        (b) Minimum length was not checked before the matching is started.
45    
46    11. The value of capture_last that is passed to callouts was incorrect in some
47        cases when there was a capture on one path that was subsequently abandoned
48        after a backtrack. Also, the capture_last value is now reset after a
49        recursion, since all captures are also reset in this case.
50    
51    12. The interpreter no longer returns the "too many substrings" error in the
52        case when an overflowing capture is in a branch that is subsequently
53        abandoned after a backtrack.
54    
55    13. In the pathological case when an offset vector of size 2 is used, pcretest
56        now prints out the matched string after a yield of 0 or 1.
57    
58    14. Inlining subpatterns in recursions, when certain conditions are fulfilled.
59        Only supported by the JIT compiler at the moment.
60    
61    15. JIT compiler now supports 32 bit Macs thanks to Lawrence Velazquez.
62    
63    16. Partial matches now set offsets[2] to the "bumpalong" value, that is, the
64        offset of the starting point of the matching process, provided the offsets
65        vector is large enough.
66    
67    17. The \A escape now records a lookbehind value of 1, though its execution
68        does not actually inspect the previous character. This is to ensure that,
69        in partial multi-segment matching, at least one character from the old
70        segment is retained when a new segment is processed. Otherwise, if there
71        are no lookbehinds in the pattern, \A might match incorrectly at the start
72        of a new segment.
73    
74    18. Added some #ifdef __VMS code into pcretest.c to help VMS implementations.
75    
76    19. Redefined some pcre_uchar variables in pcre_exec.c as pcre_uint32; this
77        gives some modest performance improvement in 8-bit mode.
78    
79    20. Added the PCRE-specific property \p{Xuc} for matching characters that can
80        be expressed in certain programming languages using Universal Character
81        Names.
82    
83    21. Unicode validation has been updated in the light of Unicode Corrigendum #9,
84        which points out that "non characters" are not "characters that may not
85        appear in Unicode strings" but rather "characters that are reserved for
86        internal use and have only local meaning".
87    
88    22. When a pattern was compiled with automatic callouts (PCRE_AUTO_CALLOUT) and
89        there was a conditional group that depended on an assertion, if the
90        assertion was false, the callout that immediately followed the alternation
91        in the condition was skipped when pcre_exec() was used for matching.
92    
93    23. Allow an explicit callout to be inserted before an assertion that is the
94        condition for a conditional group, for compatibility with automatic
95        callouts, which always insert a callout at this point.
96    
97    24. In 8.31, (*COMMIT) was confined to within a recursive subpattern. Perl also
98        confines (*SKIP) and (*PRUNE) in the same way, and this has now been done.
99    
100    25. (*PRUNE) is now supported by the JIT compiler.
101    
102    26. Fix infinite loop when /(?<=(*SKIP)ac)a/ is matched against aa.
103    
104    27. Fix the case where there are two or more SKIPs with arguments that may be
105        ignored.
106    
107    28. (*SKIP) is now supported by the JIT compiler.
108    
109    29. (*THEN) is now supported by the JIT compiler.
110    
111    30. Update RunTest with additional test selector options.
112    
113    31. The way PCRE handles backtracking verbs has been changed in two ways.
114    
115        (1) Previously, in something like (*COMMIT)(*SKIP), COMMIT would override
116        SKIP. Now, PCRE acts on whichever backtracking verb is reached first by
117        backtracking. In some cases this makes it more Perl-compatible, but Perl's
118        rather obscure rules do not always do the same thing.
119    
120        (2) Previously, backtracking verbs were confined within assertions. This is
121        no longer the case for positive assertions, except for (*ACCEPT). Again,
122        this sometimes improves Perl compatibility, and sometimes does not.
123    
124    32. A number of tests that were in test 2 because Perl did things differently
125        have been moved to test 1, because either Perl or PCRE has changed, and
126        these tests are now compatible.
127    
128    32. Control verbs are handled in the same way in JIT and interpreter.
129    
130    33. An opening parenthesis in a MARK/PRUNE/SKIP/THEN name in a pattern that
131        contained a forward subroutine reference caused a compile error.
132    
133    34. Auto-detect and optimize limited repetitions in JIT.
134    
135    35. Implement PCRE_NEVER_UTF to lock out the use of UTF, in particular,
136        blocking (*UTF) etc.
137    
138    36. In the interpreter, maximizing pattern repetitions for characters and
139        character types now use tail recursion, which reduces stack usage.
140    
141    37. The value of the max lookbehind was not correctly preserved if a compiled
142        and saved regex was reloaded on a host of different endianness.
143    
144    38. Implemented (*LIMIT_MATCH) and (*LIMIT_RECURSION). As part of the extension
145        of the compiled pattern block, expand the flags field from 16 to 32 bits
146        because it was almost full.
147    
148    39. Try madvise first before posix_madvise.
149    
150    40. Change 7 for PCRE 7.9 made it impossible for pcregrep to find empty lines
151        with a pattern such as ^$. It has taken 4 years for anybody to notice! The
152        original change locked out all matches of empty strings. This has been
153        changed so that one match of an empty string per line is recognized.
154        Subsequent searches on the same line (for colouring or for --only-matching,
155        for example) do not recognize empty strings.
156    
157    41. Applied a user patch to fix a number of spelling mistakes in comments.
158    
159    42. Data lines longer than 65536 caused pcretest to crash.
160    
161    43. Clarified the data type for length and startoffset arguments for pcre_exec
162        and pcre_dfa_exec in the function-specific man pages, where they were
163        explicitly stated to be in bytes, never having been updated. I also added
164        some clarification to the pcreapi man page.
165    
166    44. A call to pcre_dfa_exec() with an output vector size less than 2 caused
167        a segmentation fault.
168    
169    
170    Version 8.32 30-November-2012
171    -----------------------------
172    
173    1.  Improved JIT compiler optimizations for first character search and single
174        character iterators.
175    
176    2.  Supporting IBM XL C compilers for PPC architectures in the JIT compiler.
177        Patch by Daniel Richard G.
178    
179    3.  Single character iterator optimizations in the JIT compiler.
180    
181    4.  Improved JIT compiler optimizations for character ranges.
182    
183    5.  Rename the "leave" variable names to "quit" to improve WinCE compatibility.
184        Reported by Giuseppe D'Angelo.
185    
186    6.  The PCRE_STARTLINE bit, indicating that a match can occur only at the start
187        of a line, was being set incorrectly in cases where .* appeared inside
188        atomic brackets at the start of a pattern, or where there was a subsequent
189        *PRUNE or *SKIP.
190    
191    7.  Improved instruction cache flush for POWER/PowerPC.
192        Patch by Daniel Richard G.
193    
194    8.  Fixed a number of issues in pcregrep, making it more compatible with GNU
195        grep:
196    
197        (a) There is now no limit to the number of patterns to be matched.
198    
199        (b) An error is given if a pattern is too long.
200    
201        (c) Multiple uses of --exclude, --exclude-dir, --include, and --include-dir
202            are now supported.
203    
204        (d) --exclude-from and --include-from (multiple use) have been added.
205    
206        (e) Exclusions and inclusions now apply to all files and directories, not
207            just to those obtained from scanning a directory recursively.
208    
209        (f) Multiple uses of -f and --file-list are now supported.
210    
211        (g) In a Windows environment, the default for -d has been changed from
212            "read" (the GNU grep default) to "skip", because otherwise the presence
213            of a directory in the file list provokes an error.
214    
215        (h) The documentation has been revised and clarified in places.
216    
217    9.  Improve the matching speed of capturing brackets.
218    
219    10. Changed the meaning of \X so that it now matches a Unicode extended
220        grapheme cluster.
221    
222    11. Patch by Daniel Richard G to the autoconf files to add a macro for sorting
223        out POSIX threads when JIT support is configured.
224    
225    12. Added support for PCRE_STUDY_EXTRA_NEEDED.
226    
227    13. In the POSIX wrapper regcomp() function, setting re_nsub field in the preg
228        structure could go wrong in environments where size_t is not the same size
229        as int.
230    
231    14. Applied user-supplied patch to pcrecpp.cc to allow PCRE_NO_UTF8_CHECK to be
232        set.
233    
234    15. The EBCDIC support had decayed; later updates to the code had included
235        explicit references to (e.g.) \x0a instead of CHAR_LF. There has been a
236        general tidy up of EBCDIC-related issues, and the documentation was also
237        not quite right. There is now a test that can be run on ASCII systems to
238        check some of the EBCDIC-related things (but is it not a full test).
239    
240    16. The new PCRE_STUDY_EXTRA_NEEDED option is now used by pcregrep, resulting
241        in a small tidy to the code.
242    
243    17. Fix JIT tests when UTF is disabled and both 8 and 16 bit mode are enabled.
244    
245    18. If the --only-matching (-o) option in pcregrep is specified multiple
246        times, each one causes appropriate output. For example, -o1 -o2 outputs the
247        substrings matched by the 1st and 2nd capturing parentheses. A separating
248        string can be specified by --om-separator (default empty).
249    
250    19. Improving the first n character searches.
251    
252    20. Turn case lists for horizontal and vertical white space into macros so that
253        they are defined only once.
254    
255    21. This set of changes together give more compatible Unicode case-folding
256        behaviour for characters that have more than one other case when UCP
257        support is available.
258    
259        (a) The Unicode property table now has offsets into a new table of sets of
260            three or more characters that are case-equivalent. The MultiStage2.py
261            script that generates these tables (the pcre_ucd.c file) now scans
262            CaseFolding.txt instead of UnicodeData.txt for character case
263            information.
264    
265        (b) The code for adding characters or ranges of characters to a character
266            class has been abstracted into a generalized function that also handles
267            case-independence. In UTF-mode with UCP support, this uses the new data
268            to handle characters with more than one other case.
269    
270        (c) A bug that is fixed as a result of (b) is that codepoints less than 256
271            whose other case is greater than 256 are now correctly matched
272            caselessly. Previously, the high codepoint matched the low one, but not
273            vice versa.
274    
275        (d) The processing of \h, \H, \v, and \ in character classes now makes use
276            of the new class addition function, using character lists defined as
277            macros alongside the case definitions of 20 above.
278    
279        (e) Caseless back references now work with characters that have more than
280            one other case.
281    
282        (f) General caseless matching of characters with more than one other case
283            is supported.
284    
285    22. Unicode character properties were updated from Unicode 6.2.0
286    
287    23. Improved CMake support under Windows. Patch by Daniel Richard G.
288    
289    24. Add support for 32-bit character strings, and UTF-32
290    
291    25. Major JIT compiler update (code refactoring and bugfixing).
292        Experimental Sparc 32 support is added.
293    
294    26. Applied a modified version of Daniel Richard G's patch to create
295        pcre.h.generic and config.h.generic by "make" instead of in the
296        PrepareRelease script.
297    
298    27. Added a definition for CHAR_NULL (helpful for the z/OS port), and use it in
299        pcre_compile.c when checking for a zero character.
300    
301    28. Introducing a native interface for JIT. Through this interface, the compiled
302        machine code can be directly executed. The purpose of this interface is to
303        provide fast pattern matching, so several sanity checks are not performed.
304        However, feature tests are still performed. The new interface provides
305        1.4x speedup compared to the old one.
306    
307    29. If pcre_exec() or pcre_dfa_exec() was called with a negative value for
308        the subject string length, the error given was PCRE_ERROR_BADOFFSET, which
309        was confusing. There is now a new error PCRE_ERROR_BADLENGTH for this case.
310    
311    30. In 8-bit UTF-8 mode, pcretest failed to give an error for data codepoints
312        greater than 0x7fffffff (which cannot be represented in UTF-8, even under
313        the "old" RFC 2279). Instead, it ended up passing a negative length to
314        pcre_exec().
315    
316    31. Add support for GCC's visibility feature to hide internal functions.
317    
318    32. Running "pcretest -C pcre8" or "pcretest -C pcre16" gave a spurious error
319        "unknown -C option" after outputting 0 or 1.
320    
321    33. There is now support for generating a code coverage report for the test
322        suite in environments where gcc is the compiler and lcov is installed. This
323        is mainly for the benefit of the developers.
324    
325    34. If PCRE is built with --enable-valgrind, certain memory regions are marked
326        unaddressable using valgrind annotations, allowing valgrind to detect
327        invalid memory accesses. This is mainly for the benefit of the developers.
328    
329    25. (*UTF) can now be used to start a pattern in any of the three libraries.
330    
331    26. Give configure error if --enable-cpp but no C++ compiler found.
332    
333    
334    Version 8.31 06-July-2012
335    -------------------------
336    
337    1.  Fixing a wrong JIT test case and some compiler warnings.
338    
339    2.  Removed a bashism from the RunTest script.
340    
341    3.  Add a cast to pcre_exec.c to fix the warning "unary minus operator applied
342        to unsigned type, result still unsigned" that was given by an MS compiler
343        on encountering the code "-sizeof(xxx)".
344    
345    4.  Partial matching support is added to the JIT compiler.
346    
347    5.  Fixed several bugs concerned with partial matching of items that consist
348        of more than one character:
349    
350        (a) /^(..)\1/ did not partially match "aba" because checking references was
351            done on an "all or nothing" basis. This also applied to repeated
352            references.
353    
354        (b) \R did not give a hard partial match if \r was found at the end of the
355            subject.
356    
357        (c) \X did not give a hard partial match after matching one or more
358            characters at the end of the subject.
359    
360        (d) When newline was set to CRLF, a pattern such as /a$/ did not recognize
361            a partial match for the string "\r".
362    
363        (e) When newline was set to CRLF, the metacharacter "." did not recognize
364            a partial match for a CR character at the end of the subject string.
365    
366    6.  If JIT is requested using /S++ or -s++ (instead of just /S+ or -s+) when
367        running pcretest, the text "(JIT)" added to the output whenever JIT is
368        actually used to run the match.
369    
370    7.  Individual JIT compile options can be set in pcretest by following -s+[+]
371        or /S+[+] with a digit between 1 and 7.
372    
373    8.  OP_NOT now supports any UTF character not just single-byte ones.
374    
375    9.  (*MARK) control verb is now supported by the JIT compiler.
376    
377    10. The command "./RunTest list" lists the available tests without actually
378        running any of them. (Because I keep forgetting what they all are.)
379    
380    11. Add PCRE_INFO_MAXLOOKBEHIND.
381    
382    12. Applied a (slightly modified) user-supplied patch that improves performance
383        when the heap is used for recursion (compiled with --disable-stack-for-
384        recursion). Instead of malloc and free for each heap frame each time a
385        logical recursion happens, frames are retained on a chain and re-used where
386        possible. This sometimes gives as much as 30% improvement.
387    
388    13. As documented, (*COMMIT) is now confined to within a recursive subpattern
389        call.
390    
391    14. As documented, (*COMMIT) is now confined to within a positive assertion.
392    
393    15. It is now possible to link pcretest with libedit as an alternative to
394        libreadline.
395    
396    16. (*COMMIT) control verb is now supported by the JIT compiler.
397    
398    17. The Unicode data tables have been updated to Unicode 6.1.0.
399    
400    18. Added --file-list option to pcregrep.
401    
402    19. Added binary file support to pcregrep, including the -a, --binary-files,
403        -I, and --text options.
404    
405    20. The madvise function is renamed for posix_madvise for QNX compatibility
406        reasons. Fixed by Giuseppe D'Angelo.
407    
408    21. Fixed a bug for backward assertions with REVERSE 0 in the JIT compiler.
409    
410    22. Changed the option for creating symbolic links for 16-bit man pages from
411        -s to -sf so that re-installing does not cause issues.
412    
413    23. Support PCRE_NO_START_OPTIMIZE in JIT as (*MARK) support requires it.
414    
415    24. Fixed a very old bug in pcretest that caused errors with restarted DFA
416        matches in certain environments (the workspace was not being correctly
417        retained). Also added to pcre_dfa_exec() a simple plausibility check on
418        some of the workspace data at the beginning of a restart.
419    
420    25. \s*\R was auto-possessifying the \s* when it should not, whereas \S*\R
421        was not doing so when it should - probably a typo introduced by SVN 528
422        (change 8.10/14).
423    
424    26. When PCRE_UCP was not set, \w+\x{c4} was incorrectly auto-possessifying the
425        \w+ when the character tables indicated that \x{c4} was a word character.
426        There were several related cases, all because the tests for doing a table
427        lookup were testing for characters less than 127 instead of 255.
428    
429    27. If a pattern contains capturing parentheses that are not used in a match,
430        their slots in the ovector are set to -1. For those that are higher than
431        any matched groups, this happens at the end of processing. In the case when
432        there were back references that the ovector was too small to contain
433        (causing temporary malloc'd memory to be used during matching), and the
434        highest capturing number was not used, memory off the end of the ovector
435        was incorrectly being set to -1. (It was using the size of the temporary
436        memory instead of the true size.)
437    
438    28. To catch bugs like 27 using valgrind, when pcretest is asked to specify an
439        ovector size, it uses memory at the end of the block that it has got.
440    
441    29. Check for an overlong MARK name and give an error at compile time. The
442        limit is 255 for the 8-bit library and 65535 for the 16-bit library.
443    
444    30. JIT compiler update.
445    
446    31. JIT is now supported on jailbroken iOS devices. Thanks for Ruiger
447        Rill for the patch.
448    
449    32. Put spaces around SLJIT_PRINT_D in the JIT compiler. Required by CXX11.
450    
451    33. Variable renamings in the PCRE-JIT compiler. No functionality change.
452    
453    34. Fixed typos in pcregrep: in two places there was SUPPORT_LIBZ2 instead of
454        SUPPORT_LIBBZ2. This caused a build problem when bzip2 but not gzip (zlib)
455        was enabled.
456    
457    35. Improve JIT code generation for greedy plus quantifier.
458    
459    36. When /((?:a?)*)*c/ or /((?>a?)*)*c/ was matched against "aac", it set group
460        1 to "aa" instead of to an empty string. The bug affected repeated groups
461        that could potentially match an empty string.
462    
463    37. Optimizing single character iterators in JIT.
464    
465    38. Wide characters specified with \uxxxx in JavaScript mode are now subject to
466        the same checks as \x{...} characters in non-JavaScript mode. Specifically,
467        codepoints that are too big for the mode are faulted, and in a UTF mode,
468        disallowed codepoints are also faulted.
469    
470    39. If PCRE was compiled with UTF support, in three places in the DFA
471        matcher there was code that should only have been obeyed in UTF mode, but
472        was being obeyed unconditionally. In 8-bit mode this could cause incorrect
473        processing when bytes with values greater than 127 were present. In 16-bit
474        mode the bug would be provoked by values in the range 0xfc00 to 0xdc00. In
475        both cases the values are those that cannot be the first data item in a UTF
476        character. The three items that might have provoked this were recursions,
477        possessively repeated groups, and atomic groups.
478    
479    40. Ensure that libpcre is explicitly listed in the link commands for pcretest
480        and pcregrep, because some OS require shared objects to be explicitly
481        passed to ld, causing the link step to fail if they are not.
482    
483    41. There were two incorrect #ifdefs in pcre_study.c, meaning that, in 16-bit
484        mode, patterns that started with \h* or \R* might be incorrectly matched.
485    
486    
487    Version 8.30 04-February-2012
488    -----------------------------
489    
490    1.  Renamed "isnumber" as "is_a_number" because in some Mac environments this
491        name is defined in ctype.h.
492    
493    2.  Fixed a bug in fixed-length calculation for lookbehinds that would show up
494        only in quite long subpatterns.
495    
496    3.  Removed the function pcre_info(), which has been obsolete and deprecated
497        since it was replaced by pcre_fullinfo() in February 2000.
498    
499    4.  For a non-anchored pattern, if (*SKIP) was given with a name that did not
500        match a (*MARK), and the match failed at the start of the subject, a
501        reference to memory before the start of the subject could occur. This bug
502        was introduced by fix 17 of release 8.21.
503    
504    5.  A reference to an unset group with zero minimum repetition was giving
505        totally wrong answers (in non-JavaScript-compatibility mode). For example,
506        /(another)?(\1?)test/ matched against "hello world test". This bug was
507        introduced in release 8.13.
508    
509    6.  Add support for 16-bit character strings (a large amount of work involving
510        many changes and refactorings).
511    
512    7.  RunGrepTest failed on msys because \r\n was replaced by whitespace when the
513        command "pattern=`printf 'xxx\r\njkl'`" was run. The pattern is now taken
514        from a file.
515    
516    8.  Ovector size of 2 is also supported by JIT based pcre_exec (the ovector size
517        rounding is not applied in this particular case).
518    
519    9.  The invalid Unicode surrogate codepoints U+D800 to U+DFFF are now rejected
520        if they appear, or are escaped, in patterns.
521    
522    10. Get rid of a number of -Wunused-but-set-variable warnings.
523    
524    11. The pattern /(?=(*:x))(q|)/ matches an empty string, and returns the mark
525        "x". The similar pattern /(?=(*:x))((*:y)q|)/ did not return a mark at all.
526        Oddly, Perl behaves the same way. PCRE has been fixed so that this pattern
527        also returns the mark "x". This bug applied to capturing parentheses,
528        non-capturing parentheses, and atomic parentheses. It also applied to some
529        assertions.
530    
531    12. Stephen Kelly's patch to CMakeLists.txt allows it to parse the version
532        information out of configure.ac instead of relying on pcre.h.generic, which
533        is not stored in the repository.
534    
535    13. Applied Dmitry V. Levin's patch for a more portable method for linking with
536        -lreadline.
537    
538    14. ZH added PCRE_CONFIG_JITTARGET; added its output to pcretest -C.
539    
540    15. Applied Graycode's patch to put the top-level frame on the stack rather
541        than the heap when not using the stack for recursion. This gives a
542        performance improvement in many cases when recursion is not deep.
543    
544    16. Experimental code added to "pcretest -C" to output the stack frame size.
545    
546    
547    Version 8.21 12-Dec-2011
548    ------------------------
549    
550    1.  Updating the JIT compiler.
551    
552    2.  JIT compiler now supports OP_NCREF, OP_RREF and OP_NRREF. New test cases
553        are added as well.
554    
555    3.  Fix cache-flush issue on PowerPC (It is still an experimental JIT port).
556        PCRE_EXTRA_TABLES is not suported by JIT, and should be checked before
557        calling _pcre_jit_exec. Some extra comments are added.
558    
559    4.  (*MARK) settings inside atomic groups that do not contain any capturing
560        parentheses, for example, (?>a(*:m)), were not being passed out. This bug
561        was introduced by change 18 for 8.20.
562    
563    5.  Supporting of \x, \U and \u in JavaScript compatibility mode based on the
564        ECMA-262 standard.
565    
566    6.  Lookbehinds such as (?<=a{2}b) that contained a fixed repetition were
567        erroneously being rejected as "not fixed length" if PCRE_CASELESS was set.
568        This bug was probably introduced by change 9 of 8.13.
569    
570    7.  While fixing 6 above, I noticed that a number of other items were being
571        incorrectly rejected as "not fixed length". This arose partly because newer
572        opcodes had not been added to the fixed-length checking code. I have (a)
573        corrected the bug and added tests for these items, and (b) arranged for an
574        error to occur if an unknown opcode is encountered while checking for fixed
575        length instead of just assuming "not fixed length". The items that were
576        rejected were: (*ACCEPT), (*COMMIT), (*FAIL), (*MARK), (*PRUNE), (*SKIP),
577        (*THEN), \h, \H, \v, \V, and single character negative classes with fixed
578        repetitions, e.g. [^a]{3}, with and without PCRE_CASELESS.
579    
580    8.  A possessively repeated conditional subpattern such as (?(?=c)c|d)++ was
581        being incorrectly compiled and would have given unpredicatble results.
582    
583    9.  A possessively repeated subpattern with minimum repeat count greater than
584        one behaved incorrectly. For example, (A){2,}+ behaved as if it was
585        (A)(A)++ which meant that, after a subsequent mismatch, backtracking into
586        the first (A) could occur when it should not.
587    
588    10. Add a cast and remove a redundant test from the code.
589    
590    11. JIT should use pcre_malloc/pcre_free for allocation.
591    
592    12. Updated pcre-config so that it no longer shows -L/usr/lib, which seems
593        best practice nowadays, and helps with cross-compiling. (If the exec_prefix
594        is anything other than /usr, -L is still shown).
595    
596    13. In non-UTF-8 mode, \C is now supported in lookbehinds and DFA matching.
597    
598    14. Perl does not support \N without a following name in a [] class; PCRE now
599        also gives an error.
600    
601    15. If a forward reference was repeated with an upper limit of around 2000,
602        it caused the error "internal error: overran compiling workspace". The
603        maximum number of forward references (including repeats) was limited by the
604        internal workspace, and dependent on the LINK_SIZE. The code has been
605        rewritten so that the workspace expands (via pcre_malloc) if necessary, and
606        the default depends on LINK_SIZE. There is a new upper limit (for safety)
607        of around 200,000 forward references. While doing this, I also speeded up
608        the filling in of repeated forward references.
609    
610    16. A repeated forward reference in a pattern such as (a)(?2){2}(.) was
611        incorrectly expecting the subject to contain another "a" after the start.
612    
613    17. When (*SKIP:name) is activated without a corresponding (*MARK:name) earlier
614        in the match, the SKIP should be ignored. This was not happening; instead
615        the SKIP was being treated as NOMATCH. For patterns such as
616        /A(*MARK:A)A+(*SKIP:B)Z|AAC/ this meant that the AAC branch was never
617        tested.
618    
619    18. The behaviour of (*MARK), (*PRUNE), and (*THEN) has been reworked and is
620        now much more compatible with Perl, in particular in cases where the result
621        is a non-match for a non-anchored pattern. For example, if
622        /b(*:m)f|a(*:n)w/ is matched against "abc", the non-match returns the name
623        "m", where previously it did not return a name. A side effect of this
624        change is that for partial matches, the last encountered mark name is
625        returned, as for non matches. A number of tests that were previously not
626        Perl-compatible have been moved into the Perl-compatible test files. The
627        refactoring has had the pleasing side effect of removing one argument from
628        the match() function, thus reducing its stack requirements.
629    
630    19. If the /S+ option was used in pcretest to study a pattern using JIT,
631        subsequent uses of /S (without +) incorrectly behaved like /S+.
632    
633    21. Retrieve executable code size support for the JIT compiler and fixing
634        some warnings.
635    
636    22. A caseless match of a UTF-8 character whose other case uses fewer bytes did
637        not work when the shorter character appeared right at the end of the
638        subject string.
639    
640    23. Added some (int) casts to non-JIT modules to reduce warnings on 64-bit
641        systems.
642    
643    24. Added PCRE_INFO_JITSIZE to pass on the value from (21) above, and also
644        output it when the /M option is used in pcretest.
645    
646    25. The CheckMan script was not being included in the distribution. Also, added
647        an explicit "perl" to run Perl scripts from the PrepareRelease script
648        because this is reportedly needed in Windows.
649    
650    26. If study data was being save in a file and studying had not found a set of
651        "starts with" bytes for the pattern, the data written to the file (though
652        never used) was taken from uninitialized memory and so caused valgrind to
653        complain.
654    
655    27. Updated RunTest.bat as provided by Sheri Pierce.
656    
657    28. Fixed a possible uninitialized memory bug in pcre_jit_compile.c.
658    
659    29. Computation of memory usage for the table of capturing group names was
660        giving an unnecessarily large value.
661    
662    
663    Version 8.20 21-Oct-2011
664    ------------------------
665    
666    1.  Change 37 of 8.13 broke patterns like [:a]...[b:] because it thought it had
667        a POSIX class. After further experiments with Perl, which convinced me that
668        Perl has bugs and confusions, a closing square bracket is no longer allowed
669        in a POSIX name. This bug also affected patterns with classes that started
670        with full stops.
671    
672    2.  If a pattern such as /(a)b|ac/ is matched against "ac", there is no
673        captured substring, but while checking the failing first alternative,
674        substring 1 is temporarily captured. If the output vector supplied to
675        pcre_exec() was not big enough for this capture, the yield of the function
676        was still zero ("insufficient space for captured substrings"). This cannot
677        be totally fixed without adding another stack variable, which seems a lot
678        of expense for a edge case. However, I have improved the situation in cases
679        such as /(a)(b)x|abc/ matched against "abc", where the return code
680        indicates that fewer than the maximum number of slots in the ovector have
681        been set.
682    
683    3.  Related to (2) above: when there are more back references in a pattern than
684        slots in the output vector, pcre_exec() uses temporary memory during
685        matching, and copies in the captures as far as possible afterwards. It was
686        using the entire output vector, but this conflicts with the specification
687        that only 2/3 is used for passing back captured substrings. Now it uses
688        only the first 2/3, for compatibility. This is, of course, another edge
689        case.
690    
691    4.  Zoltan Herczeg's just-in-time compiler support has been integrated into the
692        main code base, and can be used by building with --enable-jit. When this is
693        done, pcregrep automatically uses it unless --disable-pcregrep-jit or the
694        runtime --no-jit option is given.
695    
696    5.  When the number of matches in a pcre_dfa_exec() run exactly filled the
697        ovector, the return from the function was zero, implying that there were
698        other matches that did not fit. The correct "exactly full" value is now
699        returned.
700    
701    6.  If a subpattern that was called recursively or as a subroutine contained
702        (*PRUNE) or any other control that caused it to give a non-standard return,
703        invalid errors such as "Error -26 (nested recursion at the same subject
704        position)" or even infinite loops could occur.
705    
706    7.  If a pattern such as /a(*SKIP)c|b(*ACCEPT)|/ was studied, it stopped
707        computing the minimum length on reaching *ACCEPT, and so ended up with the
708        wrong value of 1 rather than 0. Further investigation indicates that
709        computing a minimum subject length in the presence of *ACCEPT is difficult
710        (think back references, subroutine calls), and so I have changed the code
711        so that no minimum is registered for a pattern that contains *ACCEPT.
712    
713    8.  If (*THEN) was present in the first (true) branch of a conditional group,
714        it was not handled as intended. [But see 16 below.]
715    
716    9.  Replaced RunTest.bat and CMakeLists.txt with improved versions provided by
717        Sheri Pierce.
718    
719    10. A pathological pattern such as /(*ACCEPT)a/ was miscompiled, thinking that
720        the first byte in a match must be "a".
721    
722    11. Change 17 for 8.13 increased the recursion depth for patterns like
723        /a(?:.)*?a/ drastically. I've improved things by remembering whether a
724        pattern contains any instances of (*THEN). If it does not, the old
725        optimizations are restored. It would be nice to do this on a per-group
726        basis, but at the moment that is not feasible.
727    
728    12. In some environments, the output of pcretest -C is CRLF terminated. This
729        broke RunTest's code that checks for the link size. A single white space
730        character after the value is now allowed for.
731    
732    13. RunTest now checks for the "fr" locale as well as for "fr_FR" and "french".
733        For "fr", it uses the Windows-specific input and output files.
734    
735    14. If (*THEN) appeared in a group that was called recursively or as a
736        subroutine, it did not work as intended. [But see next item.]
737    
738    15. Consider the pattern /A (B(*THEN)C) | D/ where A, B, C, and D are complex
739        pattern fragments (but not containing any | characters). If A and B are
740        matched, but there is a failure in C so that it backtracks to (*THEN), PCRE
741        was behaving differently to Perl. PCRE backtracked into A, but Perl goes to
742        D. In other words, Perl considers parentheses that do not contain any |
743        characters to be part of a surrounding alternative, whereas PCRE was
744        treading (B(*THEN)C) the same as (B(*THEN)C|(*FAIL)) -- which Perl handles
745        differently. PCRE now behaves in the same way as Perl, except in the case
746        of subroutine/recursion calls such as (?1) which have in any case always
747        been different (but PCRE had them first :-).
748    
749    16. Related to 15 above: Perl does not treat the | in a conditional group as
750        creating alternatives. Such a group is treated in the same way as an
751        ordinary group without any | characters when processing (*THEN). PCRE has
752        been changed to match Perl's behaviour.
753    
754    17. If a user had set PCREGREP_COLO(U)R to something other than 1:31, the
755        RunGrepTest script failed.
756    
757    18. Change 22 for version 13 caused atomic groups to use more stack. This is
758        inevitable for groups that contain captures, but it can lead to a lot of
759        stack use in large patterns. The old behaviour has been restored for atomic
760        groups that do not contain any capturing parentheses.
761    
762    19. If the PCRE_NO_START_OPTIMIZE option was set for pcre_compile(), it did not
763        suppress the check for a minimum subject length at run time. (If it was
764        given to pcre_exec() or pcre_dfa_exec() it did work.)
765    
766    20. Fixed an ASCII-dependent infelicity in pcretest that would have made it
767        fail to work when decoding hex characters in data strings in EBCDIC
768        environments.
769    
770    21. It appears that in at least one Mac OS environment, the isxdigit() function
771        is implemented as a macro that evaluates to its argument more than once,
772        contravening the C 90 Standard (I haven't checked a later standard). There
773        was an instance in pcretest which caused it to go wrong when processing
774        \x{...} escapes in subject strings. The has been rewritten to avoid using
775        things like p++ in the argument of isxdigit().
776    
777    
778  Version 8.13 16-Aug-2011  Version 8.13 16-Aug-2011
779  ------------------------  ------------------------
780    
# Line 98  Version 8.13 16-Aug-2011 Line 872  Version 8.13 16-Aug-2011
872      tail recursion to cut down on stack usage. Unfortunately, now that there is      tail recursion to cut down on stack usage. Unfortunately, now that there is
873      the possibility of (*THEN) occurring in these branches, tail recursion is      the possibility of (*THEN) occurring in these branches, tail recursion is
874      no longer possible because the return has to be checked for (*THEN). These      no longer possible because the return has to be checked for (*THEN). These
875      two optimizations have therefore been removed.      two optimizations have therefore been removed. [But see 8.20/11 above.]
876    
877  18. If a pattern containing \R was studied, it was assumed that \R always  18. If a pattern containing \R was studied, it was assumed that \R always
878      matched two bytes, thus causing the minimum subject length to be      matched two bytes, thus causing the minimum subject length to be
# Line 189  Version 8.13 16-Aug-2011 Line 963  Version 8.13 16-Aug-2011
963      For example, [:a[:digit:]b:] matches "a", "b", ":", or a digit. Also,      For example, [:a[:digit:]b:] matches "a", "b", ":", or a digit. Also,
964      unescaped square brackets may also appear as part of class names. For      unescaped square brackets may also appear as part of class names. For
965      example, [:a[:abc]b:] gives unknown class "[:abc]b:]". PCRE now behaves      example, [:a[:abc]b:] gives unknown class "[:abc]b:]". PCRE now behaves
966      more like Perl.      more like Perl. (But see 8.20/1 above.)
967    
968  38. PCRE was giving an error for \N with a braced quantifier such as {1,} (this  38. PCRE was giving an error for \N with a braced quantifier such as {1,} (this
969      was because it thought it was \N{name}, which is not supported).      was because it thought it was \N{name}, which is not supported).
# Line 900  Version 7.9 11-Apr-09 Line 1674  Version 7.9 11-Apr-09
1674  7.  A pattern that could match an empty string could cause pcregrep to loop; it  7.  A pattern that could match an empty string could cause pcregrep to loop; it
1675      doesn't make sense to accept an empty string match in pcregrep, so I have      doesn't make sense to accept an empty string match in pcregrep, so I have
1676      locked it out (using PCRE's PCRE_NOTEMPTY option). By experiment, this      locked it out (using PCRE's PCRE_NOTEMPTY option). By experiment, this
1677      seems to be how GNU grep behaves.      seems to be how GNU grep behaves. [But see later change 40 for release
1678        8.33.]
1679    
1680  8.  The pattern (?(?=.*b)b|^) was incorrectly compiled as "match must be at  8.  The pattern (?(?=.*b)b|^) was incorrectly compiled as "match must be at
1681      start or after a newline", because the conditional assertion was not being      start or after a newline", because the conditional assertion was not being
# Line 1143  Version 7.7 07-May-08 Line 1918  Version 7.7 07-May-08
1918      containing () gave an internal compiling error instead of "reference to      containing () gave an internal compiling error instead of "reference to
1919      non-existent subpattern". Fortunately, when the pattern did exist, the      non-existent subpattern". Fortunately, when the pattern did exist, the
1920      compiled code was correct. (When scanning forwards to check for the      compiled code was correct. (When scanning forwards to check for the
1921      existencd of the subpattern, it was treating the data ']' as terminating      existence of the subpattern, it was treating the data ']' as terminating
1922      the class, so got the count wrong. When actually compiling, the reference      the class, so got the count wrong. When actually compiling, the reference
1923      was subsequently set up correctly.)      was subsequently set up correctly.)
1924    

Legend:
Removed from v.659  
changed lines
  Added in v.1334

  ViewVC Help
Powered by ViewVC 1.1.5