ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 73 by nigel, Sat Feb 24 21:40:30 2007 UTC revision 193 by ph10, Mon Jul 30 11:34:18 2007 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
4    Version 7.3 05-Jul-07
5    ---------------------
7     1. In the rejigging of the build system that eventually resulted in 7.1, the
8        line "#include <pcre.h>" was included in pcre_internal.h. The use of angle
9        brackets there is not right, since it causes compilers to look for an
10        installed pcre.h, not the version that is in the source that is being
11        compiled (which of course may be different). I have changed it back to:
13          #include "pcre.h"
15        I have a vague recollection that the change was concerned with compiling in
16        different directories, but in the new build system, that is taken care of
17        by the VPATH setting the Makefile.
19     2. The pattern .*$ when run in not-DOTALL UTF-8 mode with newline=any failed
20        when the subject happened to end in the byte 0x85 (e.g. if the last
21        character was \x{1ec5}). *Character* 0x85 is one of the "any" newline
22        characters but of course it shouldn't be taken as a newline when it is part
23        of another character. The bug was that, for an unlimited repeat of . in
24        not-DOTALL UTF-8 mode, PCRE was advancing by bytes rather than by
25        characters when looking for a newline.
27     3. A small performance improvement in the DOTALL UTF-8 mode .* case.
29     4. Debugging: adjusted the names of opcodes for different kinds of parentheses
30        in debug output.
32     5. Arrange to use "%I64d" instead of "%lld" for long printing in the pcrecpp
33        unittest when running under MinGW.
37    Version 7.2 19-Jun-07
38    ---------------------
40     1. If the fr_FR locale cannot be found for test 3, try the "french" locale,
41        which is apparently normally available under Windows.
43     2. Re-jig the pcregrep tests with different newline settings in an attempt
44        to make them independent of the local environment's newline setting.
46     3. Add code to configure.ac to remove -g from the CFLAGS default settings.
48     4. Some of the "internals" tests were previously cut out when the link size
49        was not 2, because the output contained actual offsets. The recent new
50        "Z" feature of pcretest means that these can be cut out, making the tests
51        usable with all link sizes.
53     5. Implemented Stan Switzer's goto replacement for longjmp() when not using
54        stack recursion. This gives a massive performance boost under BSD, but just
55        a small improvement under Linux. However, it saves one field in the frame
56        in all cases.
58     6. Added more features from the forthcoming Perl 5.10:
60        (a) (?-n) (where n is a string of digits) is a relative subroutine or
61            recursion call. It refers to the nth most recently opened parentheses.
63        (b) (?+n) is also a relative subroutine call; it refers to the nth next
64            to be opened parentheses.
66        (c) Conditions that refer to capturing parentheses can be specified
67            relatively, for example, (?(-2)... or (?(+3)...
69        (d) \K resets the start of the current match so that everything before
70            is not part of it.
72        (e) \k{name} is synonymous with \k<name> and \k'name' (.NET compatible).
74        (f) \g{name} is another synonym - part of Perl 5.10's unification of
75            reference syntax.
77        (g) (?| introduces a group in which the numbering of parentheses in each
78            alternative starts with the same number.
80        (h) \h, \H, \v, and \V match horizontal and vertical whitespace.
82     7. Added two new calls to pcre_fullinfo(): PCRE_INFO_OKPARTIAL and
85     8. A pattern such as  (.*(.)?)*  caused pcre_exec() to fail by either not
86        terminating or by crashing. Diagnosed by Viktor Griph; it was in the code
87        for detecting groups that can match an empty string.
89     9. A pattern with a very large number of alternatives (more than several
90        hundred) was running out of internal workspace during the pre-compile
91        phase, where pcre_compile() figures out how much memory will be needed. A
92        bit of new cunning has reduced the workspace needed for groups with
93        alternatives. The 1000-alternative test pattern now uses 12 bytes of
94        workspace instead of running out of the 4096 that are available.
96    10. Inserted some missing (unsigned int) casts to get rid of compiler warnings.
98    11. Applied patch from Google to remove an optimization that didn't quite work.
99        The report of the bug said:
101          pcrecpp::RE("a*").FullMatch("aaa") matches, while
102          pcrecpp::RE("a*?").FullMatch("aaa") does not, and
103          pcrecpp::RE("a*?\\z").FullMatch("aaa") does again.
105    12. If \p or \P was used in non-UTF-8 mode on a character greater than 127
106        it matched the wrong number of bytes.
109    Version 7.1 24-Apr-07
110    ---------------------
112     1. Applied Bob Rossi and Daniel G's patches to convert the build system to one
113        that is more "standard", making use of automake and other Autotools. There
114        is some re-arrangement of the files and adjustment of comments consequent
115        on this.
117     2. Part of the patch fixed a problem with the pcregrep tests. The test of -r
118        for recursive directory scanning broke on some systems because the files
119        are not scanned in any specific order and on different systems the order
120        was different. A call to "sort" has been inserted into RunGrepTest for the
121        approprate test as a short-term fix. In the longer term there may be an
122        alternative.
124     3. I had an email from Eric Raymond about problems translating some of PCRE's
125        man pages to HTML (despite the fact that I distribute HTML pages, some
126        people do their own conversions for various reasons). The problems
127        concerned the use of low-level troff macros .br and .in. I have therefore
128        removed all such uses from the man pages (some were redundant, some could
129        be replaced by .nf/.fi pairs). The 132html script that I use to generate
130        HTML has been updated to handle .nf/.fi and to complain if it encounters
131        .br or .in.
133     4. Updated comments in configure.ac that get placed in config.h.in and also
134        arranged for config.h to be included in the distribution, with the name
135        config.h.generic, for the benefit of those who have to compile without
136        Autotools (compare pcre.h, which is now distributed as pcre.h.generic).
138     5. Updated the support (such as it is) for Virtual Pascal, thanks to Stefan
139        Weber: (1) pcre_internal.h was missing some function renames; (2) updated
140        makevp.bat for the current PCRE, using the additional files
141        makevp_c.txt, makevp_l.txt, and pcregexp.pas.
143     6. A Windows user reported a minor discrepancy with test 2, which turned out
144        to be caused by a trailing space on an input line that had got lost in his
145        copy. The trailing space was an accident, so I've just removed it.
147     7. Add -Wl,-R... flags in pcre-config.in for *BSD* systems, as I'm told
148        that is needed.
150     8. Mark ucp_table (in ucptable.h) and ucp_gentype (in pcre_ucp_searchfuncs.c)
151        as "const" (a) because they are and (b) because it helps the PHP
152        maintainers who have recently made a script to detect big data structures
153        in the php code that should be moved to the .rodata section. I remembered
154        to update Builducptable as well, so it won't revert if ucptable.h is ever
155        re-created.
157     9. Added some extra #ifdef SUPPORT_UTF8 conditionals into pcretest.c,
158        pcre_printint.src, pcre_compile.c, pcre_study.c, and pcre_tables.c, in
159        order to be able to cut out the UTF-8 tables in the latter when UTF-8
160        support is not required. This saves 1.5-2K of code, which is important in
161        some applications.
163        Later: more #ifdefs are needed in pcre_ord2utf8.c and pcre_valid_utf8.c
164        so as not to refer to the tables, even though these functions will never be
165        called when UTF-8 support is disabled. Otherwise there are problems with a
166        shared library.
168    10. Fixed two bugs in the emulated memmove() function in pcre_internal.h:
170        (a) It was defining its arguments as char * instead of void *.
172        (b) It was assuming that all moves were upwards in memory; this was true
173            a long time ago when I wrote it, but is no longer the case.
175        The emulated memove() is provided for those environments that have neither
176        memmove() nor bcopy(). I didn't think anyone used it these days, but that
177        is clearly not the case, as these two bugs were recently reported.
179    11. The script PrepareRelease is now distributed: it calls 132html, CleanTxt,
180        and Detrail to create the HTML documentation, the .txt form of the man
181        pages, and it removes trailing spaces from listed files. It also creates
182        pcre.h.generic and config.h.generic from pcre.h and config.h. In the latter
183        case, it wraps all the #defines with #ifndefs. This script should be run
184        before "make dist".
186    12. Fixed two fairly obscure bugs concerned with quantified caseless matching
187        with Unicode property support.
189        (a) For a maximizing quantifier, if the two different cases of the
190            character were of different lengths in their UTF-8 codings (there are
191            some cases like this - I found 11), and the matching function had to
192            back up over a mixture of the two cases, it incorrectly assumed they
193            were both the same length.
195        (b) When PCRE was configured to use the heap rather than the stack for
196            recursion during matching, it was not correctly preserving the data for
197            the other case of a UTF-8 character when checking ahead for a match
198            while processing a minimizing repeat. If the check also involved
199            matching a wide character, but failed, corruption could cause an
200            erroneous result when trying to check for a repeat of the original
201            character.
203    13. Some tidying changes to the testing mechanism:
205        (a) The RunTest script now detects the internal link size and whether there
206            is UTF-8 and UCP support by running ./pcretest -C instead of relying on
207            values substituted by "configure". (The RunGrepTest script already did
208            this for UTF-8.) The configure.ac script no longer substitutes the
209            relevant variables.
211        (b) The debugging options /B and /D in pcretest show the compiled bytecode
212            with length and offset values. This means that the output is different
213            for different internal link sizes. Test 2 is skipped for link sizes
214            other than 2 because of this, bypassing the problem. Unfortunately,
215            there was also a test in test 3 (the locale tests) that used /B and
216            failed for link sizes other than 2. Rather than cut the whole test out,
217            I have added a new /Z option to pcretest that replaces the length and
218            offset values with spaces. This is now used to make test 3 independent
219            of link size. (Test 2 will be tidied up later.)
221    14. If erroroffset was passed as NULL to pcre_compile, it provoked a
222        segmentation fault instead of returning the appropriate error message.
224    15. In multiline mode when the newline sequence was set to "any", the pattern
225        ^$ would give a match between the \r and \n of a subject such as "A\r\nB".
226        This doesn't seem right; it now treats the CRLF combination as the line
227        ending, and so does not match in that case. It's only a pattern such as ^$
228        that would hit this one: something like ^ABC$ would have failed after \r
229        and then tried again after \r\n.
231    16. Changed the comparison command for RunGrepTest from "diff -u" to "diff -ub"
232        in an attempt to make files that differ only in their line terminators
233        compare equal. This works on Linux.
235    17. Under certain error circumstances pcregrep might try to free random memory
236        as it exited. This is now fixed, thanks to valgrind.
238    19. In pcretest, if the pattern /(?m)^$/g<any> was matched against the string
239        "abc\r\n\r\n", it found an unwanted second match after the second \r. This
240        was because its rules for how to advance for /g after matching an empty
241        string at the end of a line did not allow for this case. They now check for
242        it specially.
244    20. pcretest is supposed to handle patterns and data of any length, by
245        extending its buffers when necessary. It was getting this wrong when the
246        buffer for a data line had to be extended.
248    21. Added PCRE_NEWLINE_ANYCRLF which is like ANY, but matches only CR, LF, or
249        CRLF as a newline sequence.
251    22. Code for handling Unicode properties in pcre_dfa_exec() wasn't being cut
252        out by #ifdef SUPPORT_UCP. This did no harm, as it could never be used, but
253        I have nevertheless tidied it up.
255    23. Added some casts to kill warnings from HP-UX ia64 compiler.
257    24. Added a man page for pcre-config.
260    Version 7.0 19-Dec-06
261    ---------------------
263     1. Fixed a signed/unsigned compiler warning in pcre_compile.c, shown up by
264        moving to gcc 4.1.1.
266     2. The -S option for pcretest uses setrlimit(); I had omitted to #include
267        sys/time.h, which is documented as needed for this function. It doesn't
268        seem to matter on Linux, but it showed up on some releases of OS X.
270     3. It seems that there are systems where bytes whose values are greater than
271        127 match isprint() in the "C" locale. The "C" locale should be the
272        default when a C program starts up. In most systems, only ASCII printing
273        characters match isprint(). This difference caused the output from pcretest
274        to vary, making some of the tests fail. I have changed pcretest so that:
276        (a) When it is outputting text in the compiled version of a pattern, bytes
277            other than 32-126 are always shown as hex escapes.
279        (b) When it is outputting text that is a matched part of a subject string,
280            it does the same, unless a different locale has been set for the match
281            (using the /L modifier). In this case, it uses isprint() to decide.
283     4. Fixed a major bug that caused incorrect computation of the amount of memory
284        required for a compiled pattern when options that changed within the
285        pattern affected the logic of the preliminary scan that determines the
286        length. The relevant options are -x, and -i in UTF-8 mode. The result was
287        that the computed length was too small. The symptoms of this bug were
288        either the PCRE error "internal error: code overflow" from pcre_compile(),
289        or a glibc crash with a message such as "pcretest: free(): invalid next
290        size (fast)". Examples of patterns that provoked this bug (shown in
291        pcretest format) are:
293          /(?-x: )/x
294          /(?x)(?-x: \s*#\s*)/
295          /((?i)[\x{c0}])/8
296          /(?i:[\x{c0}])/8
298        HOWEVER: Change 17 below makes this fix obsolete as the memory computation
299        is now done differently.
301     5. Applied patches from Google to: (a) add a QuoteMeta function to the C++
302        wrapper classes; (b) implement a new function in the C++ scanner that is
303        more efficient than the old way of doing things because it avoids levels of
304        recursion in the regex matching; (c) add a paragraph to the documentation
305        for the FullMatch() function.
307     6. The escape sequence \n was being treated as whatever was defined as
308        "newline". Not only was this contrary to the documentation, which states
309        that \n is character 10 (hex 0A), but it also went horribly wrong when
310        "newline" was defined as CRLF. This has been fixed.
312     7. In pcre_dfa_exec.c the value of an unsigned integer (the variable called c)
313        was being set to -1 for the "end of line" case (supposedly a value that no
314        character can have). Though this value is never used (the check for end of
315        line is "zero bytes in current character"), it caused compiler complaints.
316        I've changed it to 0xffffffff.
318     8. In pcre_version.c, the version string was being built by a sequence of
319        C macros that, in the event of PCRE_PRERELEASE being defined as an empty
320        string (as it is for production releases) called a macro with an empty
321        argument. The C standard says the result of this is undefined. The gcc
322        compiler treats it as an empty string (which was what was wanted) but it is
323        reported that Visual C gives an error. The source has been hacked around to
324        avoid this problem.
326     9. On the advice of a Windows user, included <io.h> and <fcntl.h> in Windows
327        builds of pcretest, and changed the call to _setmode() to use _O_BINARY
328        instead of 0x8000. Made all the #ifdefs test both _WIN32 and WIN32 (not all
329        of them did).
331    10. Originally, pcretest opened its input and output without "b"; then I was
332        told that "b" was needed in some environments, so it was added for release
333        5.0 to both the input and output. (It makes no difference on Unix-like
334        systems.) Later I was told that it is wrong for the input on Windows. I've
335        now abstracted the modes into two macros, to make it easier to fiddle with
336        them, and removed "b" from the input mode under Windows.
338    11. Added pkgconfig support for the C++ wrapper library, libpcrecpp.
340    12. Added -help and --help to pcretest as an official way of being reminded
341        of the options.
343    13. Removed some redundant semicolons after macro calls in pcrecpparg.h.in
344        and pcrecpp.cc because they annoy compilers at high warning levels.
346    14. A bit of tidying/refactoring in pcre_exec.c in the main bumpalong loop.
348    15. Fixed an occurrence of == in configure.ac that should have been = (shell
349        scripts are not C programs :-) and which was not noticed because it works
350        on Linux.
352    16. pcretest is supposed to handle any length of pattern and data line (as one
353        line or as a continued sequence of lines) by extending its input buffer if
354        necessary. This feature was broken for very long pattern lines, leading to
355        a string of junk being passed to pcre_compile() if the pattern was longer
356        than about 50K.
358    17. I have done a major re-factoring of the way pcre_compile() computes the
359        amount of memory needed for a compiled pattern. Previously, there was code
360        that made a preliminary scan of the pattern in order to do this. That was
361        OK when PCRE was new, but as the facilities have expanded, it has become
362        harder and harder to keep it in step with the real compile phase, and there
363        have been a number of bugs (see for example, 4 above). I have now found a
364        cunning way of running the real compile function in a "fake" mode that
365        enables it to compute how much memory it would need, while actually only
366        ever using a few hundred bytes of working memory and without too many
367        tests of the mode. This should make future maintenance and development
368        easier. A side effect of this work is that the limit of 200 on the nesting
369        depth of parentheses has been removed (though this was never a serious
370        limitation, I suspect). However, there is a downside: pcre_compile() now
371        runs more slowly than before (30% or more, depending on the pattern). I
372        hope this isn't a big issue. There is no effect on runtime performance.
374    18. Fixed a minor bug in pcretest: if a pattern line was not terminated by a
375        newline (only possible for the last line of a file) and it was a
376        pattern that set a locale (followed by /Lsomething), pcretest crashed.
378    19. Added additional timing features to pcretest. (1) The -tm option now times
379        matching only, not compiling. (2) Both -t and -tm can be followed, as a
380        separate command line item, by a number that specifies the number of
381        repeats to use when timing. The default is 50000; this gives better
382        precision, but takes uncomfortably long for very large patterns.
384    20. Extended pcre_study() to be more clever in cases where a branch of a
385        subpattern has no definite first character. For example, (a*|b*)[cd] would
386        previously give no result from pcre_study(). Now it recognizes that the
387        first character must be a, b, c, or d.
389    21. There was an incorrect error "recursive call could loop indefinitely" if
390        a subpattern (or the entire pattern) that was being tested for matching an
391        empty string contained only one non-empty item after a nested subpattern.
392        For example, the pattern (?>\x{100}*)\d(?R) provoked this error
393        incorrectly, because the \d was being skipped in the check.
395    22. The pcretest program now has a new pattern option /B and a command line
396        option -b, which is equivalent to adding /B to every pattern. This causes
397        it to show the compiled bytecode, without the additional information that
398        -d shows. The effect of -d is now the same as -b with -i (and similarly, /D
399        is the same as /B/I).
401    23. A new optimization is now able automatically to treat some sequences such
402        as a*b as a*+b. More specifically, if something simple (such as a character
403        or a simple class like \d) has an unlimited quantifier, and is followed by
404        something that cannot possibly match the quantified thing, the quantifier
405        is automatically "possessified".
407    24. A recursive reference to a subpattern whose number was greater than 39
408        went wrong under certain circumstances in UTF-8 mode. This bug could also
409        have affected the operation of pcre_study().
411    25. Realized that a little bit of performance could be had by replacing
412        (c & 0xc0) == 0xc0 with c >= 0xc0 when processing UTF-8 characters.
414    26. Timing data from pcretest is now shown to 4 decimal places instead of 3.
416    27. Possessive quantifiers such as a++ were previously implemented by turning
417        them into atomic groups such as ($>a+). Now they have their own opcodes,
418        which improves performance. This includes the automatically created ones
419        from 23 above.
421    28. A pattern such as (?=(\w+))\1: which simulates an atomic group using a
422        lookahead was broken if it was not anchored. PCRE was mistakenly expecting
423        the first matched character to be a colon. This applied both to named and
424        numbered groups.
426    29. The ucpinternal.h header file was missing its idempotency #ifdef.
428    30. I was sent a "project" file called libpcre.a.dev which I understand makes
429        building PCRE on Windows easier, so I have included it in the distribution.
431    31. There is now a check in pcretest against a ridiculously large number being
432        returned by pcre_exec() or pcre_dfa_exec(). If this happens in a /g or /G
433        loop, the loop is abandoned.
435    32. Forward references to subpatterns in conditions such as (?(2)...) where
436        subpattern 2 is defined later cause pcre_compile() to search forwards in
437        the pattern for the relevant set of parentheses. This search went wrong
438        when there were unescaped parentheses in a character class, parentheses
439        escaped with \Q...\E, or parentheses in a #-comment in /x mode.
441    33. "Subroutine" calls and backreferences were previously restricted to
442        referencing subpatterns earlier in the regex. This restriction has now
443        been removed.
445    34. Added a number of extra features that are going to be in Perl 5.10. On the
446        whole, these are just syntactic alternatives for features that PCRE had
447        previously implemented using the Python syntax or my own invention. The
448        other formats are all retained for compatibility.
450        (a) Named groups can now be defined as (?<name>...) or (?'name'...) as well
451            as (?P<name>...). The new forms, as well as being in Perl 5.10, are
452            also .NET compatible.
454        (b) A recursion or subroutine call to a named group can now be defined as
455            (?&name) as well as (?P>name).
457        (c) A backreference to a named group can now be defined as \k<name> or
458            \k'name' as well as (?P=name). The new forms, as well as being in Perl
459            5.10, are also .NET compatible.
461        (d) A conditional reference to a named group can now use the syntax
462            (?(<name>) or (?('name') as well as (?(name).
464        (e) A "conditional group" of the form (?(DEFINE)...) can be used to define
465            groups (named and numbered) that are never evaluated inline, but can be
466            called as "subroutines" from elsewhere. In effect, the DEFINE condition
467            is always false. There may be only one alternative in such a group.
469        (f) A test for recursion can be given as (?(R1).. or (?(R&name)... as well
470            as the simple (?(R). The condition is true only if the most recent
471            recursion is that of the given number or name. It does not search out
472            through the entire recursion stack.
474        (g) The escape \gN or \g{N} has been added, where N is a positive or
475            negative number, specifying an absolute or relative reference.
477    35. Tidied to get rid of some further signed/unsigned compiler warnings and
478        some "unreachable code" warnings.
480    36. Updated the Unicode property tables to Unicode version 5.0.0. Amongst other
481        things, this adds five new scripts.
483    37. Perl ignores orphaned \E escapes completely. PCRE now does the same.
484        There were also incompatibilities regarding the handling of \Q..\E inside
485        character classes, for example with patterns like [\Qa\E-\Qz\E] where the
486        hyphen was adjacent to \Q or \E. I hope I've cleared all this up now.
488    38. Like Perl, PCRE detects when an indefinitely repeated parenthesized group
489        matches an empty string, and forcibly breaks the loop. There were bugs in
490        this code in non-simple cases. For a pattern such as  ^(a()*)*  matched
491        against  aaaa  the result was just "a" rather than "aaaa", for example. Two
492        separate and independent bugs (that affected different cases) have been
493        fixed.
495    39. Refactored the code to abolish the use of different opcodes for small
496        capturing bracket numbers. This is a tidy that I avoided doing when I
497        removed the limit on the number of capturing brackets for 3.5 back in 2001.
498        The new approach is not only tidier, it makes it possible to reduce the
499        memory needed to fix the previous bug (38).
501    40. Implemented PCRE_NEWLINE_ANY to recognize any of the Unicode newline
502        sequences (http://unicode.org/unicode/reports/tr18/) as "newline" when
503        processing dot, circumflex, or dollar metacharacters, or #-comments in /x
504        mode.
506    41. Add \R to match any Unicode newline sequence, as suggested in the Unicode
507        report.
509    42. Applied patch, originally from Ari Pollak, modified by Google, to allow
510        copy construction and assignment in the C++ wrapper.
512    43. Updated pcregrep to support "--newline=any". In the process, I fixed a
513        couple of bugs that could have given wrong results in the "--newline=crlf"
514        case.
516    44. Added a number of casts and did some reorganization of signed/unsigned int
517        variables following suggestions from Dair Grant. Also renamed the variable
518        "this" as "item" because it is a C++ keyword.
520    45. Arranged for dftables to add
522          #include "pcre_internal.h"
524        to pcre_chartables.c because without it, gcc 4.x may remove the array
525        definition from the final binary if PCRE is built into a static library and
526        dead code stripping is activated.
528    46. For an unanchored pattern, if a match attempt fails at the start of a
529        newline sequence, and the newline setting is CRLF or ANY, and the next two
530        characters are CRLF, advance by two characters instead of one.
533    Version 6.7 04-Jul-06
534    ---------------------
536     1. In order to handle tests when input lines are enormously long, pcretest has
537        been re-factored so that it automatically extends its buffers when
538        necessary. The code is crude, but this _is_ just a test program. The
539        default size has been increased from 32K to 50K.
541     2. The code in pcre_study() was using the value of the re argument before
542        testing it for NULL. (Of course, in any sensible call of the function, it
543        won't be NULL.)
545     3. The memmove() emulation function in pcre_internal.h, which is used on
546        systems that lack both memmove() and bcopy() - that is, hardly ever -
547        was missing a "static" storage class specifier.
549     4. When UTF-8 mode was not set, PCRE looped when compiling certain patterns
550        containing an extended class (one that cannot be represented by a bitmap
551        because it contains high-valued characters or Unicode property items, e.g.
552        [\pZ]). Almost always one would set UTF-8 mode when processing such a
553        pattern, but PCRE should not loop if you do not (it no longer does).
554        [Detail: two cases were found: (a) a repeated subpattern containing an
555        extended class; (b) a recursive reference to a subpattern that followed a
556        previous extended class. It wasn't skipping over the extended class
557        correctly when UTF-8 mode was not set.]
559     5. A negated single-character class was not being recognized as fixed-length
560        in lookbehind assertions such as (?<=[^f]), leading to an incorrect
561        compile error "lookbehind assertion is not fixed length".
563     6. The RunPerlTest auxiliary script was showing an unexpected difference
564        between PCRE and Perl for UTF-8 tests. It turns out that it is hard to
565        write a Perl script that can interpret lines of an input file either as
566        byte characters or as UTF-8, which is what "perltest" was being required to
567        do for the non-UTF-8 and UTF-8 tests, respectively. Essentially what you
568        can't do is switch easily at run time between having the "use utf8;" pragma
569        or not. In the end, I fudged it by using the RunPerlTest script to insert
570        "use utf8;" explicitly for the UTF-8 tests.
572     7. In multiline (/m) mode, PCRE was matching ^ after a terminating newline at
573        the end of the subject string, contrary to the documentation and to what
574        Perl does. This was true of both matching functions. Now it matches only at
575        the start of the subject and immediately after *internal* newlines.
577     8. A call of pcre_fullinfo() from pcretest to get the option bits was passing
578        a pointer to an int instead of a pointer to an unsigned long int. This
579        caused problems on 64-bit systems.
581     9. Applied a patch from the folks at Google to pcrecpp.cc, to fix "another
582        instance of the 'standard' template library not being so standard".
584    10. There was no check on the number of named subpatterns nor the maximum
585        length of a subpattern name. The product of these values is used to compute
586        the size of the memory block for a compiled pattern. By supplying a very
587        long subpattern name and a large number of named subpatterns, the size
588        computation could be caused to overflow. This is now prevented by limiting
589        the length of names to 32 characters, and the number of named subpatterns
590        to 10,000.
592    11. Subpatterns that are repeated with specific counts have to be replicated in
593        the compiled pattern. The size of memory for this was computed from the
594        length of the subpattern and the repeat count. The latter is limited to
595        65535, but there was no limit on the former, meaning that integer overflow
596        could in principle occur. The compiled length of a repeated subpattern is
597        now limited to 30,000 bytes in order to prevent this.
599    12. Added the optional facility to have named substrings with the same name.
601    13. Added the ability to use a named substring as a condition, using the
602        Python syntax: (?(name)yes|no). This overloads (?(R)... and names that
603        are numbers (not recommended). Forward references are permitted.
605    14. Added forward references in named backreferences (if you see what I mean).
607    15. In UTF-8 mode, with the PCRE_DOTALL option set, a quantified dot in the
608        pattern could run off the end of the subject. For example, the pattern
609        "(?s)(.{1,5})"8 did this with the subject "ab".
611    16. If PCRE_DOTALL or PCRE_MULTILINE were set, pcre_dfa_exec() behaved as if
612        PCRE_CASELESS was set when matching characters that were quantified with ?
613        or *.
615    17. A character class other than a single negated character that had a minimum
616        but no maximum quantifier - for example [ab]{6,} - was not handled
617        correctly by pce_dfa_exec(). It would match only one character.
619    18. A valid (though odd) pattern that looked like a POSIX character
620        class but used an invalid character after [ (for example [[,abc,]]) caused
621        pcre_compile() to give the error "Failed: internal error: code overflow" or
622        in some cases to crash with a glibc free() error. This could even happen if
623        the pattern terminated after [[ but there just happened to be a sequence of
624        letters, a binary zero, and a closing ] in the memory that followed.
626    19. Perl's treatment of octal escapes in the range \400 to \777 has changed
627        over the years. Originally (before any Unicode support), just the bottom 8
628        bits were taken. Thus, for example, \500 really meant \100. Nowadays the
629        output from "man perlunicode" includes this:
631          The regular expression compiler produces polymorphic opcodes.  That
632          is, the pattern adapts to the data and automatically switches to
633          the Unicode character scheme when presented with Unicode data--or
634          instead uses a traditional byte scheme when presented with byte
635          data.
637        Sadly, a wide octal escape does not cause a switch, and in a string with
638        no other multibyte characters, these octal escapes are treated as before.
639        Thus, in Perl, the pattern  /\500/ actually matches \100 but the pattern
640        /\500|\x{1ff}/ matches \500 or \777 because the whole thing is treated as a
641        Unicode string.
643        I have not perpetrated such confusion in PCRE. Up till now, it took just
644        the bottom 8 bits, as in old Perl. I have now made octal escapes with
645        values greater than \377 illegal in non-UTF-8 mode. In UTF-8 mode they
646        translate to the appropriate multibyte character.
648    29. Applied some refactoring to reduce the number of warnings from Microsoft
649        and Borland compilers. This has included removing the fudge introduced
650        seven years ago for the OS/2 compiler (see 2.02/2 below) because it caused
651        a warning about an unused variable.
653    21. PCRE has not included VT (character 0x0b) in the set of whitespace
654        characters since release 4.0, because Perl (from release 5.004) does not.
655        [Or at least, is documented not to: some releases seem to be in conflict
656        with the documentation.] However, when a pattern was studied with
657        pcre_study() and all its branches started with \s, PCRE still included VT
658        as a possible starting character. Of course, this did no harm; it just
659        caused an unnecessary match attempt.
661    22. Removed a now-redundant internal flag bit that recorded the fact that case
662        dependency changed within the pattern. This was once needed for "required
663        byte" processing, but is no longer used. This recovers a now-scarce options
664        bit. Also moved the least significant internal flag bit to the most-
665        significant bit of the word, which was not previously used (hangover from
666        the days when it was an int rather than a uint) to free up another bit for
667        the future.
669    23. Added support for CRLF line endings as well as CR and LF. As well as the
670        default being selectable at build time, it can now be changed at runtime
671        via the PCRE_NEWLINE_xxx flags. There are now options for pcregrep to
672        specify that it is scanning data with non-default line endings.
674    24. Changed the definition of CXXLINK to make it agree with the definition of
675        LINK in the Makefile, by replacing LDFLAGS to CXXFLAGS.
677    25. Applied Ian Taylor's patches to avoid using another stack frame for tail
678        recursions. This makes a big different to stack usage for some patterns.
680    26. If a subpattern containing a named recursion or subroutine reference such
681        as (?P>B) was quantified, for example (xxx(?P>B)){3}, the calculation of
682        the space required for the compiled pattern went wrong and gave too small a
683        value. Depending on the environment, this could lead to "Failed: internal
684        error: code overflow at offset 49" or "glibc detected double free or
685        corruption" errors.
687    27. Applied patches from Google (a) to support the new newline modes and (b) to
688        advance over multibyte UTF-8 characters in GlobalReplace.
690    28. Change free() to pcre_free() in pcredemo.c. Apparently this makes a
691        difference for some implementation of PCRE in some Windows version.
693    29. Added some extra testing facilities to pcretest:
695        \q<number>   in a data line sets the "match limit" value
696        \Q<number>   in a data line sets the "match recursion limt" value
697        -S <number>  sets the stack size, where <number> is in megabytes
699        The -S option isn't available for Windows.
702    Version 6.6 06-Feb-06
703    ---------------------
705     1. Change 16(a) for 6.5 broke things, because PCRE_DATA_SCOPE was not defined
706        in pcreposix.h. I have copied the definition from pcre.h.
708     2. Change 25 for 6.5 broke compilation in a build directory out-of-tree
709        because pcre.h is no longer a built file.
711     3. Added Jeff Friedl's additional debugging patches to pcregrep. These are
712        not normally included in the compiled code.
715    Version 6.5 01-Feb-06
716    ---------------------
718     1. When using the partial match feature with pcre_dfa_exec(), it was not
719        anchoring the second and subsequent partial matches at the new starting
720        point. This could lead to incorrect results. For example, with the pattern
721        /1234/, partially matching against "123" and then "a4" gave a match.
723     2. Changes to pcregrep:
725        (a) All non-match returns from pcre_exec() were being treated as failures
726            to match the line. Now, unless the error is PCRE_ERROR_NOMATCH, an
727            error message is output. Some extra information is given for the
728            PCRE_ERROR_MATCHLIMIT and PCRE_ERROR_RECURSIONLIMIT errors, which are
729            probably the only errors that are likely to be caused by users (by
730            specifying a regex that has nested indefinite repeats, for instance).
731            If there are more than 20 of these errors, pcregrep is abandoned.
733        (b) A binary zero was treated as data while matching, but terminated the
734            output line if it was written out. This has been fixed: binary zeroes
735            are now no different to any other data bytes.
737        (c) Whichever of the LC_ALL or LC_CTYPE environment variables is set is
738            used to set a locale for matching. The --locale=xxxx long option has
739            been added (no short equivalent) to specify a locale explicitly on the
740            pcregrep command, overriding the environment variables.
742        (d) When -B was used with -n, some line numbers in the output were one less
743            than they should have been.
745        (e) Added the -o (--only-matching) option.
747        (f) If -A or -C was used with -c (count only), some lines of context were
748            accidentally printed for the final match.
750        (g) Added the -H (--with-filename) option.
752        (h) The combination of options -rh failed to suppress file names for files
753            that were found from directory arguments.
755        (i) Added the -D (--devices) and -d (--directories) options.
757        (j) Added the -F (--fixed-strings) option.
759        (k) Allow "-" to be used as a file name for -f as well as for a data file.
761        (l) Added the --colo(u)r option.
763        (m) Added Jeffrey Friedl's -S testing option, but within #ifdefs so that it
764            is not present by default.
766     3. A nasty bug was discovered in the handling of recursive patterns, that is,
767        items such as (?R) or (?1), when the recursion could match a number of
768        alternatives. If it matched one of the alternatives, but subsequently,
769        outside the recursion, there was a failure, the code tried to back up into
770        the recursion. However, because of the way PCRE is implemented, this is not
771        possible, and the result was an incorrect result from the match.
773        In order to prevent this happening, the specification of recursion has
774        been changed so that all such subpatterns are automatically treated as
775        atomic groups. Thus, for example, (?R) is treated as if it were (?>(?R)).
777     4. I had overlooked the fact that, in some locales, there are characters for
778        which isalpha() is true but neither isupper() nor islower() are true. In
779        the fr_FR locale, for instance, the \xAA and \xBA characters (ordmasculine
780        and ordfeminine) are like this. This affected the treatment of \w and \W
781        when they appeared in character classes, but not when they appeared outside
782        a character class. The bit map for "word" characters is now created
783        separately from the results of isalnum() instead of just taking it from the
784        upper, lower, and digit maps. (Plus the underscore character, of course.)
786     5. The above bug also affected the handling of POSIX character classes such as
787        [[:alpha:]] and [[:alnum:]]. These do not have their own bit maps in PCRE's
788        permanent tables. Instead, the bit maps for such a class were previously
789        created as the appropriate unions of the upper, lower, and digit bitmaps.
790        Now they are created by subtraction from the [[:word:]] class, which has
791        its own bitmap.
793     6. The [[:blank:]] character class matches horizontal, but not vertical space.
794        It is created by subtracting the vertical space characters (\x09, \x0a,
795        \x0b, \x0c) from the [[:space:]] bitmap. Previously, however, the
796        subtraction was done in the overall bitmap for a character class, meaning
797        that a class such as [\x0c[:blank:]] was incorrect because \x0c would not
798        be recognized. This bug has been fixed.
800     7. Patches from the folks at Google:
802          (a) pcrecpp.cc: "to handle a corner case that may or may not happen in
803          real life, but is still worth protecting against".
805          (b) pcrecpp.cc: "corrects a bug when negative radixes are used with
806          regular expressions".
808          (c) pcre_scanner.cc: avoid use of std::count() because not all systems
809          have it.
811          (d) Split off pcrecpparg.h from pcrecpp.h and had the former built by
812          "configure" and the latter not, in order to fix a problem somebody had
813          with compiling the Arg class on HP-UX.
815          (e) Improve the error-handling of the C++ wrapper a little bit.
817          (f) New tests for checking recursion limiting.
819     8. The pcre_memmove() function, which is used only if the environment does not
820        have a standard memmove() function (and is therefore rarely compiled),
821        contained two bugs: (a) use of int instead of size_t, and (b) it was not
822        returning a result (though PCRE never actually uses the result).
824     9. In the POSIX regexec() interface, if nmatch is specified as a ridiculously
825        large number - greater than INT_MAX/(3*sizeof(int)) - REG_ESPACE is
826        returned instead of calling malloc() with an overflowing number that would
827        most likely cause subsequent chaos.
829    10. The debugging option of pcretest was not showing the NO_AUTO_CAPTURE flag.
831    11. The POSIX flag REG_NOSUB is now supported. When a pattern that was compiled
832        with this option is matched, the nmatch and pmatch options of regexec() are
833        ignored.
835    12. Added REG_UTF8 to the POSIX interface. This is not defined by POSIX, but is
836        provided in case anyone wants to the the POSIX interface with UTF-8
837        strings.
839    13. Added CXXLDFLAGS to the Makefile parameters to provide settings only on the
840        C++ linking (needed for some HP-UX environments).
842    14. Avoid compiler warnings in get_ucpname() when compiled without UCP support
843        (unused parameter) and in the pcre_printint() function (omitted "default"
844        switch label when the default is to do nothing).
846    15. Added some code to make it possible, when PCRE is compiled as a C++
847        library, to replace subject pointers for pcre_exec() with a smart pointer
848        class, thus making it possible to process discontinuous strings.
850    16. The two macros PCRE_EXPORT and PCRE_DATA_SCOPE are confusing, and perform
851        much the same function. They were added by different people who were trying
852        to make PCRE easy to compile on non-Unix systems. It has been suggested
853        that PCRE_EXPORT be abolished now that there is more automatic apparatus
854        for compiling on Windows systems. I have therefore replaced it with
855        PCRE_DATA_SCOPE. This is set automatically for Windows; if not set it
856        defaults to "extern" for C or "extern C" for C++, which works fine on
857        Unix-like systems. It is now possible to override the value of PCRE_DATA_
858        SCOPE with something explicit in config.h. In addition:
860        (a) pcreposix.h still had just "extern" instead of either of these macros;
861            I have replaced it with PCRE_DATA_SCOPE.
863        (b) Functions such as _pcre_xclass(), which are internal to the library,
864            but external in the C sense, all had PCRE_EXPORT in their definitions.
865            This is apparently wrong for the Windows case, so I have removed it.
866            (It makes no difference on Unix-like systems.)
868    17. Added a new limit, MATCH_LIMIT_RECURSION, which limits the depth of nesting
869        of recursive calls to match(). This is different to MATCH_LIMIT because
870        that limits the total number of calls to match(), not all of which increase
871        the depth of recursion. Limiting the recursion depth limits the amount of
872        stack (or heap if NO_RECURSE is set) that is used. The default can be set
873        when PCRE is compiled, and changed at run time. A patch from Google adds
874        this functionality to the C++ interface.
876    18. Changes to the handling of Unicode character properties:
878        (a) Updated the table to Unicode 4.1.0.
880        (b) Recognize characters that are not in the table as "Cn" (undefined).
882        (c) I revised the way the table is implemented to a much improved format
883            which includes recognition of ranges. It now supports the ranges that
884            are defined in UnicodeData.txt, and it also amalgamates other
885            characters into ranges. This has reduced the number of entries in the
886            table from around 16,000 to around 3,000, thus reducing its size
887            considerably. I realized I did not need to use a tree structure after
888            all - a binary chop search is just as efficient. Having reduced the
889            number of entries, I extended their size from 6 bytes to 8 bytes to
890            allow for more data.
892        (d) Added support for Unicode script names via properties such as \p{Han}.
894    19. In UTF-8 mode, a backslash followed by a non-Ascii character was not
895        matching that character.
897    20. When matching a repeated Unicode property with a minimum greater than zero,
898        (for example \pL{2,}), PCRE could look past the end of the subject if it
899        reached it while seeking the minimum number of characters. This could
900        happen only if some of the characters were more than one byte long, because
901        there is a check for at least the minimum number of bytes.
903    21. Refactored the implementation of \p and \P so as to be more general, to
904        allow for more different types of property in future. This has changed the
905        compiled form incompatibly. Anybody with saved compiled patterns that use
906        \p or \P will have to recompile them.
908    22. Added "Any" and "L&" to the supported property types.
910    23. Recognize \x{...} as a code point specifier, even when not in UTF-8 mode,
911        but give a compile time error if the value is greater than 0xff.
913    24. The man pages for pcrepartial, pcreprecompile, and pcre_compile2 were
914        accidentally not being installed or uninstalled.
916    25. The pcre.h file was built from pcre.h.in, but the only changes that were
917        made were to insert the current release number. This seemed silly, because
918        it made things harder for people building PCRE on systems that don't run
919        "configure". I have turned pcre.h into a distributed file, no longer built
920        by "configure", with the version identification directly included. There is
921        no longer a pcre.h.in file.
923        However, this change necessitated a change to the pcre-config script as
924        well. It is built from pcre-config.in, and one of the substitutions was the
925        release number. I have updated configure.ac so that ./configure now finds
926        the release number by grepping pcre.h.
928    26. Added the ability to run the tests under valgrind.
931    Version 6.4 05-Sep-05
932    ---------------------
934     1. Change 6.0/10/(l) to pcregrep introduced a bug that caused separator lines
935        "--" to be printed when multiple files were scanned, even when none of the
936        -A, -B, or -C options were used. This is not compatible with Gnu grep, so I
937        consider it to be a bug, and have restored the previous behaviour.
939     2. A couple of code tidies to get rid of compiler warnings.
941     3. The pcretest program used to cheat by referring to symbols in the library
942        whose names begin with _pcre_. These are internal symbols that are not
943        really supposed to be visible externally, and in some environments it is
944        possible to suppress them. The cheating is now confined to including
945        certain files from the library's source, which is a bit cleaner.
947     4. Renamed pcre.in as pcre.h.in to go with pcrecpp.h.in; it also makes the
948        file's purpose clearer.
950     5. Reorganized pcre_ucp_findchar().
953    Version 6.3 15-Aug-05
954    ---------------------
956     1. The file libpcre.pc.in did not have general read permission in the tarball.
958     2. There were some problems when building without C++ support:
960        (a) If C++ support was not built, "make install" and "make test" still
961            tried to test it.
963        (b) There were problems when the value of CXX was explicitly set. Some
964            changes have been made to try to fix these, and ...
966        (c) --disable-cpp can now be used to explicitly disable C++ support.
968        (d) The use of @CPP_OBJ@ directly caused a blank line preceded by a
969            backslash in a target when C++ was disabled. This confuses some
970            versions of "make", apparently. Using an intermediate variable solves
971            this. (Same for CPP_LOBJ.)
973     3. $(LINK_FOR_BUILD) now includes $(CFLAGS_FOR_BUILD) and $(LINK)
974        (non-Windows) now includes $(CFLAGS) because these flags are sometimes
975        necessary on certain architectures.
977     4. Added a setting of -export-symbols-regex to the link command to remove
978        those symbols that are exported in the C sense, but actually are local
979        within the library, and not documented. Their names all begin with
980        "_pcre_". This is not a perfect job, because (a) we have to except some
981        symbols that pcretest ("illegally") uses, and (b) the facility isn't always
982        available (and never for static libraries). I have made a note to try to
983        find a way round (a) in the future.
986    Version 6.2 01-Aug-05
987    ---------------------
989     1. There was no test for integer overflow of quantifier values. A construction
990        such as {1111111111111111} would give undefined results. What is worse, if
991        a minimum quantifier for a parenthesized subpattern overflowed and became
992        negative, the calculation of the memory size went wrong. This could have
993        led to memory overwriting.
995     2. Building PCRE using VPATH was broken. Hopefully it is now fixed.
997     3. Added "b" to the 2nd argument of fopen() in dftables.c, for non-Unix-like
998        operating environments where this matters.
1000     4. Applied Giuseppe Maxia's patch to add additional features for controlling
1001        PCRE options from within the C++ wrapper.
1003     5. Named capturing subpatterns were not being correctly counted when a pattern
1004        was compiled. This caused two problems: (a) If there were more than 100
1005        such subpatterns, the calculation of the memory needed for the whole
1006        compiled pattern went wrong, leading to an overflow error. (b) Numerical
1007        back references of the form \12, where the number was greater than 9, were
1008        not recognized as back references, even though there were sufficient
1009        previous subpatterns.
1011     6. Two minor patches to pcrecpp.cc in order to allow it to compile on older
1012        versions of gcc, e.g. 2.95.4.
1015    Version 6.1 21-Jun-05
1016    ---------------------
1018     1. There was one reference to the variable "posix" in pcretest.c that was not
1019        surrounded by "#if !defined NOPOSIX".
1021     2. Make it possible to compile pcretest without DFA support, UTF8 support, or
1022        the cross-check on the old pcre_info() function, for the benefit of the
1023        cut-down version of PCRE that is currently imported into Exim.
1025     3. A (silly) pattern starting with (?i)(?-i) caused an internal space
1026        allocation error. I've done the easy fix, which wastes 2 bytes for sensible
1027        patterns that start (?i) but I don't think that matters. The use of (?i) is
1028        just an example; this all applies to the other options as well.
1030     4. Since libtool seems to echo the compile commands it is issuing, the output
1031        from "make" can be reduced a bit by putting "@" in front of each libtool
1032        compile command.
1034     5. Patch from the folks at Google for configure.in to be a bit more thorough
1035        in checking for a suitable C++ installation before trying to compile the
1036        C++ stuff. This should fix a reported problem when a compiler was present,
1037        but no suitable headers.
1039     6. The man pages all had just "PCRE" as their title. I have changed them to
1040        be the relevant file name. I have also arranged that these names are
1041        retained in the file doc/pcre.txt, which is a concatenation in text format
1042        of all the man pages except the little individual ones for each function.
1044     7. The NON-UNIX-USE file had not been updated for the different set of source
1045        files that come with release 6. I also added a few comments about the C++
1046        wrapper.
1049    Version 6.0 07-Jun-05
1050    ---------------------
1052     1. Some minor internal re-organization to help with my DFA experiments.
1054     2. Some missing #ifdef SUPPORT_UCP conditionals in pcretest and printint that
1055        didn't matter for the library itself when fully configured, but did matter
1056        when compiling without UCP support, or within Exim, where the ucp files are
1057        not imported.
1059     3. Refactoring of the library code to split up the various functions into
1060        different source modules. The addition of the new DFA matching code (see
1061        below) to a single monolithic source would have made it really too
1062        unwieldy, quite apart from causing all the code to be include in a
1063        statically linked application, when only some functions are used. This is
1064        relevant even without the DFA addition now that patterns can be compiled in
1065        one application and matched in another.
1067        The downside of splitting up is that there have to be some external
1068        functions and data tables that are used internally in different modules of
1069        the library but which are not part of the API. These have all had their
1070        names changed to start with "_pcre_" so that they are unlikely to clash
1071        with other external names.
1073     4. Added an alternate matching function, pcre_dfa_exec(), which matches using
1074        a different (DFA) algorithm. Although it is slower than the original
1075        function, it does have some advantages for certain types of matching
1076        problem.
1078     5. Upgrades to pcretest in order to test the features of pcre_dfa_exec(),
1079        including restarting after a partial match.
1081     6. A patch for pcregrep that defines INVALID_FILE_ATTRIBUTES if it is not
1082        defined when compiling for Windows was sent to me. I have put it into the
1083        code, though I have no means of testing or verifying it.
1085     7. Added the pcre_refcount() auxiliary function.
1087     8. Added the PCRE_FIRSTLINE option. This constrains an unanchored pattern to
1088        match before or at the first newline in the subject string. In pcretest,
1089        the /f option on a pattern can be used to set this.
1091     9. A repeated \w when used in UTF-8 mode with characters greater than 256
1092        would behave wrongly. This has been present in PCRE since release 4.0.
1094    10. A number of changes to the pcregrep command:
1096        (a) Refactored how -x works; insert ^(...)$ instead of setting
1097            PCRE_ANCHORED and checking the length, in preparation for adding
1098            something similar for -w.
1100        (b) Added the -w (match as a word) option.
1102        (c) Refactored the way lines are read and buffered so as to have more
1103            than one at a time available.
1105        (d) Implemented a pcregrep test script.
1107        (e) Added the -M (multiline match) option. This allows patterns to match
1108            over several lines of the subject. The buffering ensures that at least
1109            8K, or the rest of the document (whichever is the shorter) is available
1110            for matching (and similarly the previous 8K for lookbehind assertions).
1112        (f) Changed the --help output so that it now says
1114              -w, --word-regex(p)
1116            instead of two lines, one with "regex" and the other with "regexp"
1117            because that confused at least one person since the short forms are the
1118            same. (This required a bit of code, as the output is generated
1119            automatically from a table. It wasn't just a text change.)
1121        (g) -- can be used to terminate pcregrep options if the next thing isn't an
1122            option but starts with a hyphen. Could be a pattern or a path name
1123            starting with a hyphen, for instance.
1125        (h) "-" can be given as a file name to represent stdin.
1127        (i) When file names are being printed, "(standard input)" is used for
1128            the standard input, for compatibility with GNU grep. Previously
1129            "<stdin>" was used.
1131        (j) The option --label=xxx can be used to supply a name to be used for
1132            stdin when file names are being printed. There is no short form.
1134        (k) Re-factored the options decoding logic because we are going to add
1135            two more options that take data. Such options can now be given in four
1136            different ways, e.g. "-fname", "-f name", "--file=name", "--file name".
1138        (l) Added the -A, -B, and -C options for requesting that lines of context
1139            around matches be printed.
1141        (m) Added the -L option to print the names of files that do not contain
1142            any matching lines, that is, the complement of -l.
1144        (n) The return code is 2 if any file cannot be opened, but pcregrep does
1145            continue to scan other files.
1147        (o) The -s option was incorrectly implemented. For compatibility with other
1148            greps, it now suppresses the error message for a non-existent or non-
1149            accessible file (but not the return code). There is a new option called
1150            -q that suppresses the output of matching lines, which was what -s was
1151            previously doing.
1153        (p) Added --include and --exclude options to specify files for inclusion
1154            and exclusion when recursing.
1156    11. The Makefile was not using the Autoconf-supported LDFLAGS macro properly.
1157        Hopefully, it now does.
1159    12. Missing cast in pcre_study().
1161    13. Added an "uninstall" target to the makefile.
1163    14. Replaced "extern" in the function prototypes in Makefile.in with
1164        "PCRE_DATA_SCOPE", which defaults to 'extern' or 'extern "C"' in the Unix
1165        world, but is set differently for Windows.
1167    15. Added a second compiling function called pcre_compile2(). The only
1168        difference is that it has an extra argument, which is a pointer to an
1169        integer error code. When there is a compile-time failure, this is set
1170        non-zero, in addition to the error test pointer being set to point to an
1171        error message. The new argument may be NULL if no error number is required
1172        (but then you may as well call pcre_compile(), which is now just a
1173        wrapper). This facility is provided because some applications need a
1174        numeric error indication, but it has also enabled me to tidy up the way
1175        compile-time errors are handled in the POSIX wrapper.
1177    16. Added VPATH=.libs to the makefile; this should help when building with one
1178        prefix path and installing with another. (Or so I'm told by someone who
1179        knows more about this stuff than I do.)
1181    17. Added a new option, REG_DOTALL, to the POSIX function regcomp(). This
1182        passes PCRE_DOTALL to the pcre_compile() function, making the "." character
1183        match everything, including newlines. This is not POSIX-compatible, but
1184        somebody wanted the feature. From pcretest it can be activated by using
1185        both the P and the s flags.
1187    18. AC_PROG_LIBTOOL appeared twice in Makefile.in. Removed one.
1189    19. libpcre.pc was being incorrectly installed as executable.
1191    20. A couple of places in pcretest check for end-of-line by looking for '\n';
1192        it now also looks for '\r' so that it will work unmodified on Windows.
1194    21. Added Google's contributed C++ wrapper to the distribution.
1196    22. Added some untidy missing memory free() calls in pcretest, to keep
1197        Electric Fence happy when testing.
1201    Version 5.0 13-Sep-04
1202    ---------------------
1204     1. Internal change: literal characters are no longer packed up into items
1205        containing multiple characters in a single byte-string. Each character
1206        is now matched using a separate opcode. However, there may be more than one
1207        byte in the character in UTF-8 mode.
1209     2. The pcre_callout_block structure has two new fields: pattern_position and
1210        next_item_length. These contain the offset in the pattern to the next match
1211        item, and its length, respectively.
1213     3. The PCRE_AUTO_CALLOUT option for pcre_compile() requests the automatic
1214        insertion of callouts before each pattern item. Added the /C option to
1215        pcretest to make use of this.
1217     4. On the advice of a Windows user, the lines
1219          #if defined(_WIN32) || defined(WIN32)
1220          _setmode( _fileno( stdout ), 0x8000 );
1221          #endif  /* defined(_WIN32) || defined(WIN32) */
1223        have been added to the source of pcretest. This apparently does useful
1224        magic in relation to line terminators.
1226     5. Changed "r" and "w" in the calls to fopen() in pcretest to "rb" and "wb"
1227        for the benefit of those environments where the "b" makes a difference.
1229     6. The icc compiler has the same options as gcc, but "configure" doesn't seem
1230        to know about it. I have put a hack into configure.in that adds in code
1231        to set GCC=yes if CC=icc. This seems to end up at a point in the
1232        generated configure script that is early enough to affect the setting of
1233        compiler options, which is what is needed, but I have no means of testing
1234        whether it really works. (The user who reported this had patched the
1235        generated configure script, which of course I cannot do.)
1237        LATER: After change 22 below (new libtool files), the configure script
1238        seems to know about icc (and also ecc). Therefore, I have commented out
1239        this hack in configure.in.
1241     7. Added support for pkg-config (2 patches were sent in).
1243     8. Negated POSIX character classes that used a combination of internal tables
1244        were completely broken. These were [[:^alpha:]], [[:^alnum:]], and
1245        [[:^ascii]]. Typically, they would match almost any characters. The other
1246        POSIX classes were not broken in this way.
1248     9. Matching the pattern "\b.*?" against "ab cd", starting at offset 1, failed
1249        to find the match, as PCRE was deluded into thinking that the match had to
1250        start at the start point or following a newline. The same bug applied to
1251        patterns with negative forward assertions or any backward assertions
1252        preceding ".*" at the start, unless the pattern required a fixed first
1253        character. This was a failing pattern: "(?!.bcd).*". The bug is now fixed.
1255    10. In UTF-8 mode, when moving forwards in the subject after a failed match
1256        starting at the last subject character, bytes beyond the end of the subject
1257        string were read.
1259    11. Renamed the variable "class" as "classbits" to make life easier for C++
1260        users. (Previously there was a macro definition, but it apparently wasn't
1261        enough.)
1263    12. Added the new field "tables" to the extra data so that tables can be passed
1264        in at exec time, or the internal tables can be re-selected. This allows
1265        a compiled regex to be saved and re-used at a later time by a different
1266        program that might have everything at different addresses.
1268    13. Modified the pcre-config script so that, when run on Solaris, it shows a
1269        -R library as well as a -L library.
1271    14. The debugging options of pcretest (-d on the command line or D on a
1272        pattern) showed incorrect output for anything following an extended class
1273        that contained multibyte characters and which was followed by a quantifier.
1275    15. Added optional support for general category Unicode character properties
1276        via the \p, \P, and \X escapes. Unicode property support implies UTF-8
1277        support. It adds about 90K to the size of the library. The meanings of the
1278        inbuilt class escapes such as \d and \s have NOT been changed.
1280    16. Updated pcredemo.c to include calls to free() to release the memory for the
1281        compiled pattern.
1283    17. The generated file chartables.c was being created in the source directory
1284        instead of in the building directory. This caused the build to fail if the
1285        source directory was different from the building directory, and was
1286        read-only.
1288    18. Added some sample Win commands from Mark Tetrode into the NON-UNIX-USE
1289        file. No doubt somebody will tell me if they don't make sense... Also added
1290        Dan Mooney's comments about building on OpenVMS.
1292    19. Added support for partial matching via the PCRE_PARTIAL option for
1293        pcre_exec() and the \P data escape in pcretest.
1295    20. Extended pcretest with 3 new pattern features:
1297        (i)   A pattern option of the form ">rest-of-line" causes pcretest to
1298              write the compiled pattern to the file whose name is "rest-of-line".
1299              This is a straight binary dump of the data, with the saved pointer to
1300              the character tables forced to be NULL. The study data, if any, is
1301              written too. After writing, pcretest reads a new pattern.
1303        (ii)  If, instead of a pattern, "<rest-of-line" is given, pcretest reads a
1304              compiled pattern from the given file. There must not be any
1305              occurrences of "<" in the file name (pretty unlikely); if there are,
1306              pcretest will instead treat the initial "<" as a pattern delimiter.
1307              After reading in the pattern, pcretest goes on to read data lines as
1308              usual.
1310        (iii) The F pattern option causes pcretest to flip the bytes in the 32-bit
1311              and 16-bit fields in a compiled pattern, to simulate a pattern that
1312              was compiled on a host of opposite endianness.
1314    21. The pcre-exec() function can now cope with patterns that were compiled on
1315        hosts of opposite endianness, with this restriction:
1317          As for any compiled expression that is saved and used later, the tables
1318          pointer field cannot be preserved; the extra_data field in the arguments
1319          to pcre_exec() should be used to pass in a tables address if a value
1320          other than the default internal tables were used at compile time.
1322    22. Calling pcre_exec() with a negative value of the "ovecsize" parameter is
1323        now diagnosed as an error. Previously, most of the time, a negative number
1324        would have been treated as zero, but if in addition "ovector" was passed as
1325        NULL, a crash could occur.
1327    23. Updated the files ltmain.sh, config.sub, config.guess, and aclocal.m4 with
1328        new versions from the libtool 1.5 distribution (the last one is a copy of
1329        a file called libtool.m4). This seems to have fixed the need to patch
1330        "configure" to support Darwin 1.3 (which I used to do). However, I still
1331        had to patch ltmain.sh to ensure that ${SED} is set (it isn't on my
1332        workstation).
1334    24. Changed the PCRE licence to be the more standard "BSD" licence.
1337  Version 4.5 01-Dec-03  Version 4.5 01-Dec-03
1338  ---------------------  ---------------------

Removed from v.73  
changed lines
  Added in v.193

  ViewVC Help
Powered by ViewVC 1.1.5