ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 740 by zherczeg, Mon Oct 31 06:10:14 2011 UTC revision 890 by ph10, Wed Jan 18 16:25:19 2012 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
4  Version 8.21  Version 8.30
5  ------------  ------------
7    1.  Renamed "isnumber" as "is_a_number" because in some Mac environments this
8        name is defined in ctype.h.
10    2.  Fixed a bug in fixed-length calculation for lookbehinds that would show up
11        only in quite long subpatterns.
13    3.  Removed the function pcre_info(), which has been obsolete and deprecated
14        since it was replaced by pcre_fullinfo() in February 2000.
16    4.  For a non-anchored pattern, if (*SKIP) was given with a name that did not
17        match a (*MARK), and the match failed at the start of the subject, a
18        reference to memory before the start of the subject could occur. This bug
19        was introduced by fix 17 of release 8.21.
21    5.  A reference to an unset group with zero minimum repetition was giving
22        totally wrong answers (in non-JavaScript-compatibility mode). For example,
23        /(another)?(\1?)test/ matched against "hello world test". This bug was
24        introduced in release 8.13.
26    6.  Add support for 16-bit character strings (a large amount of work involving
27        many changes and refactorings).
29    7.  RunGrepTest failed on msys because \r\n was replaced by whitespace when the
30        command "pattern=`printf 'xxx\r\njkl'`" was run. The pattern is now taken
31        from a file.
33    8.  Ovector size of 2 is also supported by JIT based pcre_exec (the ovector size
34        rounding is not applied in this particular case).
36    9.  The invalid Unicode surrogate codepoints U+D800 to U+DFFF are now rejected
37        if they appear, or are escaped, in patterns.
39    10. Get rid of a number of -Wunused-but-set-variable warnings.
41    11. The pattern /(?=(*:x))(q|)/ matches an empty string, and returns the mark
42        "x". The similar pattern /(?=(*:x))((*:y)q|)/ did not return a mark at all.
43        Oddly, Perl behaves the same way. PCRE has been fixed so that this pattern
44        also returns the mark "x". This bug applied to capturing parentheses,
45        non-capturing parentheses, and atomic parentheses. It also applied to some
46        assertions.
48    12. Stephen Kelly's patch to CMakeLists.txt allows it to parse the version
49        information out of configure.ac instead of relying on pcre.h.generic, which
50        is not stored in the repository.
52    13. Applied Dmitry V. Levin's patch for a more portable method for linking with
53        -lreadline.
55    14. ZH added PCRE_CONFIG_JITTARGET; added it's output to pcretest -C.
58    Version 8.21 12-Dec-2011
59    ------------------------
61  1.  Updating the JIT compiler.  1.  Updating the JIT compiler.
63    2.  JIT compiler now supports OP_NCREF, OP_RREF and OP_NRREF. New test cases
64        are added as well.
66    3.  Fix cache-flush issue on PowerPC (It is still an experimental JIT port).
67        PCRE_EXTRA_TABLES is not suported by JIT, and should be checked before
68        calling _pcre_jit_exec. Some extra comments are added.
70    4.  (*MARK) settings inside atomic groups that do not contain any capturing
71        parentheses, for example, (?>a(*:m)), were not being passed out. This bug
72        was introduced by change 18 for 8.20.
74    5.  Supporting of \x, \U and \u in JavaScript compatibility mode based on the
75        ECMA-262 standard.
77    6.  Lookbehinds such as (?<=a{2}b) that contained a fixed repetition were
78        erroneously being rejected as "not fixed length" if PCRE_CASELESS was set.
79        This bug was probably introduced by change 9 of 8.13.
81    7.  While fixing 6 above, I noticed that a number of other items were being
82        incorrectly rejected as "not fixed length". This arose partly because newer
83        opcodes had not been added to the fixed-length checking code. I have (a)
84        corrected the bug and added tests for these items, and (b) arranged for an
85        error to occur if an unknown opcode is encountered while checking for fixed
86        length instead of just assuming "not fixed length". The items that were
87        rejected were: (*ACCEPT), (*COMMIT), (*FAIL), (*MARK), (*PRUNE), (*SKIP),
88        (*THEN), \h, \H, \v, \V, and single character negative classes with fixed
89        repetitions, e.g. [^a]{3}, with and without PCRE_CASELESS.
91    8.  A possessively repeated conditional subpattern such as (?(?=c)c|d)++ was
92        being incorrectly compiled and would have given unpredicatble results.
94    9.  A possessively repeated subpattern with minimum repeat count greater than
95        one behaved incorrectly. For example, (A){2,}+ behaved as if it was
96        (A)(A)++ which meant that, after a subsequent mismatch, backtracking into
97        the first (A) could occur when it should not.
99    10. Add a cast and remove a redundant test from the code.
101    11. JIT should use pcre_malloc/pcre_free for allocation.
103    12. Updated pcre-config so that it no longer shows -L/usr/lib, which seems
104        best practice nowadays, and helps with cross-compiling. (If the exec_prefix
105        is anything other than /usr, -L is still shown).
107    13. In non-UTF-8 mode, \C is now supported in lookbehinds and DFA matching.
109    14. Perl does not support \N without a following name in a [] class; PCRE now
110        also gives an error.
112    15. If a forward reference was repeated with an upper limit of around 2000,
113        it caused the error "internal error: overran compiling workspace". The
114        maximum number of forward references (including repeats) was limited by the
115        internal workspace, and dependent on the LINK_SIZE. The code has been
116        rewritten so that the workspace expands (via pcre_malloc) if necessary, and
117        the default depends on LINK_SIZE. There is a new upper limit (for safety)
118        of around 200,000 forward references. While doing this, I also speeded up
119        the filling in of repeated forward references.
121    16. A repeated forward reference in a pattern such as (a)(?2){2}(.) was
122        incorrectly expecting the subject to contain another "a" after the start.
124    17. When (*SKIP:name) is activated without a corresponding (*MARK:name) earlier
125        in the match, the SKIP should be ignored. This was not happening; instead
126        the SKIP was being treated as NOMATCH. For patterns such as
127        /A(*MARK:A)A+(*SKIP:B)Z|AAC/ this meant that the AAC branch was never
128        tested.
130    18. The behaviour of (*MARK), (*PRUNE), and (*THEN) has been reworked and is
131        now much more compatible with Perl, in particular in cases where the result
132        is a non-match for a non-anchored pattern. For example, if
133        /b(*:m)f|a(*:n)w/ is matched against "abc", the non-match returns the name
134        "m", where previously it did not return a name. A side effect of this
135        change is that for partial matches, the last encountered mark name is
136        returned, as for non matches. A number of tests that were previously not
137        Perl-compatible have been moved into the Perl-compatible test files. The
138        refactoring has had the pleasing side effect of removing one argument from
139        the match() function, thus reducing its stack requirements.
141    19. If the /S+ option was used in pcretest to study a pattern using JIT,
142        subsequent uses of /S (without +) incorrectly behaved like /S+.
144    21. Retrieve executable code size support for the JIT compiler and fixing
145        some warnings.
147    22. A caseless match of a UTF-8 character whose other case uses fewer bytes did
148        not work when the shorter character appeared right at the end of the
149        subject string.
151    23. Added some (int) casts to non-JIT modules to reduce warnings on 64-bit
152        systems.
154    24. Added PCRE_INFO_JITSIZE to pass on the value from (21) above, and also
155        output it when the /M option is used in pcretest.
157    25. The CheckMan script was not being included in the distribution. Also, added
158        an explicit "perl" to run Perl scripts from the PrepareRelease script
159        because this is reportedly needed in Windows.
161    26. If study data was being save in a file and studying had not found a set of
162        "starts with" bytes for the pattern, the data written to the file (though
163        never used) was taken from uninitialized memory and so caused valgrind to
164        complain.
166    27. Updated RunTest.bat as provided by Sheri Pierce.
168    28. Fixed a possible uninitialized memory bug in pcre_jit_compile.c.
170    29. Computation of memory usage for the table of capturing group names was
171        giving an unnecessarily large value.
174  Version 8.20 21-Oct-2011  Version 8.20 21-Oct-2011
175  ------------------------  ------------------------

Removed from v.740  
changed lines
  Added in v.890

  ViewVC Help
Powered by ViewVC 1.1.5