ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 388 by ph10, Wed Mar 11 17:03:17 2009 UTC revision 958 by zherczeg, Wed Apr 11 10:19:10 2012 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
4  Version 7.9 xx-xxx-09  Version 8.31
5    -----------------------------
7    1.  Fixing a wrong JIT test case and some compiler warnings.
9    2.  Removed a bashism from the RunTest script.
11    3.  Add a cast to pcre_exec.c to fix the warning "unary minus operator applied
12        to unsigned type, result still unsigned" that was given by an MS compiler
13        on encountering the code "-sizeof(xxx)".
15    4.  Partial matching support is added to the JIT compiler.
17    5.  Fixed several bugs concerned with partial matching of items that consist
18        of more than one character:
20        (a) /^(..)\1/ did not partially match "aba" because checking references was
21            done on an "all or nothing" basis. This also applied to repeated
22            references.
24        (b) \R did not give a hard partial match if \r was found at the end of the
25            subject.
27        (c) \X did not give a hard partial match after matching one or more
28            characters at the end of the subject.
30        (d) When newline was set to CRLF, a pattern such as /a$/ did not recognize
31            a partial match for the string "\r".
33        (e) When newline was set to CRLF, the metacharacter "." did not recognize
34            a partial match for a CR character at the end of the subject string.
36    6.  If JIT is requested using /S++ or -s++ (instead of just /S+ or -s+) when
37        running pcretest, the text "(JIT)" added to the output whenever JIT is
38        actually used to run the match.
40    7.  Individual JIT compile options can be set in pcretest by following -s+[+]
41        or /S+[+] with a digit between 1 and 7.
43    8.  OP_NOT now supports any UTF character not just single-byte ones.
45    9.  (*MARK) control verb is now supported by the JIT compiler.
47    10. The command "./RunTest list" lists the available tests without actually
48        running any of them. (Because I keep forgetting what they all are.)
52    12. Applied a (slightly modified) user-supplied patch that improves performance
53        when the heap is used for recursion (compiled with --disable-stack-for-
54        recursion). Instead of malloc and free for each heap frame each time a
55        logical recursion happens, frames are retained on a chain and re-used where
56        possible. This sometimes gives as much as 30% improvement.
58    13. As documented, (*COMMIT) is now confined to within a recursive subpattern
59        call.
61    14. As documented, (*COMMIT) is now confined to within a positive assertion.
63    15. It is now possible to link pcretest with libedit as an alternative to
64        libreadline.
66    16. (*COMMIT) control verb is now supported by the JIT compiler.
68    17. The Unicode data tables have been updated to Unicode 6.1.0.
70    18. Added --file-list option to pcregrep.
72    19. Added binary file support to pcregrep, including the -a, --binary-files,
73        -I, and --text options.
75    20. The madvise function is renamed for posix_madvise for QNX compatibility
76        reasons. Fixed by Giuseppe D'Angelo.
78    21. Fixed a bug for backward assertions with REVERSE 0 in the JIT compiler.
80    22. Changed the option for creating symbolic links for 16-bit man pages from
81        -s to -sf so that re-installing does not cause issues.
83    23. Support PCRE_NO_START_OPTIMIZE in JIT as (*MARK) support requires it.
86    Version 8.30 04-February-2012
87    -----------------------------
89    1.  Renamed "isnumber" as "is_a_number" because in some Mac environments this
90        name is defined in ctype.h.
92    2.  Fixed a bug in fixed-length calculation for lookbehinds that would show up
93        only in quite long subpatterns.
95    3.  Removed the function pcre_info(), which has been obsolete and deprecated
96        since it was replaced by pcre_fullinfo() in February 2000.
98    4.  For a non-anchored pattern, if (*SKIP) was given with a name that did not
99        match a (*MARK), and the match failed at the start of the subject, a
100        reference to memory before the start of the subject could occur. This bug
101        was introduced by fix 17 of release 8.21.
103    5.  A reference to an unset group with zero minimum repetition was giving
104        totally wrong answers (in non-JavaScript-compatibility mode). For example,
105        /(another)?(\1?)test/ matched against "hello world test". This bug was
106        introduced in release 8.13.
108    6.  Add support for 16-bit character strings (a large amount of work involving
109        many changes and refactorings).
111    7.  RunGrepTest failed on msys because \r\n was replaced by whitespace when the
112        command "pattern=`printf 'xxx\r\njkl'`" was run. The pattern is now taken
113        from a file.
115    8.  Ovector size of 2 is also supported by JIT based pcre_exec (the ovector size
116        rounding is not applied in this particular case).
118    9.  The invalid Unicode surrogate codepoints U+D800 to U+DFFF are now rejected
119        if they appear, or are escaped, in patterns.
121    10. Get rid of a number of -Wunused-but-set-variable warnings.
123    11. The pattern /(?=(*:x))(q|)/ matches an empty string, and returns the mark
124        "x". The similar pattern /(?=(*:x))((*:y)q|)/ did not return a mark at all.
125        Oddly, Perl behaves the same way. PCRE has been fixed so that this pattern
126        also returns the mark "x". This bug applied to capturing parentheses,
127        non-capturing parentheses, and atomic parentheses. It also applied to some
128        assertions.
130    12. Stephen Kelly's patch to CMakeLists.txt allows it to parse the version
131        information out of configure.ac instead of relying on pcre.h.generic, which
132        is not stored in the repository.
134    13. Applied Dmitry V. Levin's patch for a more portable method for linking with
135        -lreadline.
137    14. ZH added PCRE_CONFIG_JITTARGET; added its output to pcretest -C.
139    15. Applied Graycode's patch to put the top-level frame on the stack rather
140        than the heap when not using the stack for recursion. This gives a
141        performance improvement in many cases when recursion is not deep.
143    16. Experimental code added to "pcretest -C" to output the stack frame size.
146    Version 8.21 12-Dec-2011
147    ------------------------
149    1.  Updating the JIT compiler.
151    2.  JIT compiler now supports OP_NCREF, OP_RREF and OP_NRREF. New test cases
152        are added as well.
154    3.  Fix cache-flush issue on PowerPC (It is still an experimental JIT port).
155        PCRE_EXTRA_TABLES is not suported by JIT, and should be checked before
156        calling _pcre_jit_exec. Some extra comments are added.
158    4.  (*MARK) settings inside atomic groups that do not contain any capturing
159        parentheses, for example, (?>a(*:m)), were not being passed out. This bug
160        was introduced by change 18 for 8.20.
162    5.  Supporting of \x, \U and \u in JavaScript compatibility mode based on the
163        ECMA-262 standard.
165    6.  Lookbehinds such as (?<=a{2}b) that contained a fixed repetition were
166        erroneously being rejected as "not fixed length" if PCRE_CASELESS was set.
167        This bug was probably introduced by change 9 of 8.13.
169    7.  While fixing 6 above, I noticed that a number of other items were being
170        incorrectly rejected as "not fixed length". This arose partly because newer
171        opcodes had not been added to the fixed-length checking code. I have (a)
172        corrected the bug and added tests for these items, and (b) arranged for an
173        error to occur if an unknown opcode is encountered while checking for fixed
174        length instead of just assuming "not fixed length". The items that were
175        rejected were: (*ACCEPT), (*COMMIT), (*FAIL), (*MARK), (*PRUNE), (*SKIP),
176        (*THEN), \h, \H, \v, \V, and single character negative classes with fixed
177        repetitions, e.g. [^a]{3}, with and without PCRE_CASELESS.
179    8.  A possessively repeated conditional subpattern such as (?(?=c)c|d)++ was
180        being incorrectly compiled and would have given unpredicatble results.
182    9.  A possessively repeated subpattern with minimum repeat count greater than
183        one behaved incorrectly. For example, (A){2,}+ behaved as if it was
184        (A)(A)++ which meant that, after a subsequent mismatch, backtracking into
185        the first (A) could occur when it should not.
187    10. Add a cast and remove a redundant test from the code.
189    11. JIT should use pcre_malloc/pcre_free for allocation.
191    12. Updated pcre-config so that it no longer shows -L/usr/lib, which seems
192        best practice nowadays, and helps with cross-compiling. (If the exec_prefix
193        is anything other than /usr, -L is still shown).
195    13. In non-UTF-8 mode, \C is now supported in lookbehinds and DFA matching.
197    14. Perl does not support \N without a following name in a [] class; PCRE now
198        also gives an error.
200    15. If a forward reference was repeated with an upper limit of around 2000,
201        it caused the error "internal error: overran compiling workspace". The
202        maximum number of forward references (including repeats) was limited by the
203        internal workspace, and dependent on the LINK_SIZE. The code has been
204        rewritten so that the workspace expands (via pcre_malloc) if necessary, and
205        the default depends on LINK_SIZE. There is a new upper limit (for safety)
206        of around 200,000 forward references. While doing this, I also speeded up
207        the filling in of repeated forward references.
209    16. A repeated forward reference in a pattern such as (a)(?2){2}(.) was
210        incorrectly expecting the subject to contain another "a" after the start.
212    17. When (*SKIP:name) is activated without a corresponding (*MARK:name) earlier
213        in the match, the SKIP should be ignored. This was not happening; instead
214        the SKIP was being treated as NOMATCH. For patterns such as
215        /A(*MARK:A)A+(*SKIP:B)Z|AAC/ this meant that the AAC branch was never
216        tested.
218    18. The behaviour of (*MARK), (*PRUNE), and (*THEN) has been reworked and is
219        now much more compatible with Perl, in particular in cases where the result
220        is a non-match for a non-anchored pattern. For example, if
221        /b(*:m)f|a(*:n)w/ is matched against "abc", the non-match returns the name
222        "m", where previously it did not return a name. A side effect of this
223        change is that for partial matches, the last encountered mark name is
224        returned, as for non matches. A number of tests that were previously not
225        Perl-compatible have been moved into the Perl-compatible test files. The
226        refactoring has had the pleasing side effect of removing one argument from
227        the match() function, thus reducing its stack requirements.
229    19. If the /S+ option was used in pcretest to study a pattern using JIT,
230        subsequent uses of /S (without +) incorrectly behaved like /S+.
232    21. Retrieve executable code size support for the JIT compiler and fixing
233        some warnings.
235    22. A caseless match of a UTF-8 character whose other case uses fewer bytes did
236        not work when the shorter character appeared right at the end of the
237        subject string.
239    23. Added some (int) casts to non-JIT modules to reduce warnings on 64-bit
240        systems.
242    24. Added PCRE_INFO_JITSIZE to pass on the value from (21) above, and also
243        output it when the /M option is used in pcretest.
245    25. The CheckMan script was not being included in the distribution. Also, added
246        an explicit "perl" to run Perl scripts from the PrepareRelease script
247        because this is reportedly needed in Windows.
249    26. If study data was being save in a file and studying had not found a set of
250        "starts with" bytes for the pattern, the data written to the file (though
251        never used) was taken from uninitialized memory and so caused valgrind to
252        complain.
254    27. Updated RunTest.bat as provided by Sheri Pierce.
256    28. Fixed a possible uninitialized memory bug in pcre_jit_compile.c.
258    29. Computation of memory usage for the table of capturing group names was
259        giving an unnecessarily large value.
262    Version 8.20 21-Oct-2011
263    ------------------------
265    1.  Change 37 of 8.13 broke patterns like [:a]...[b:] because it thought it had
266        a POSIX class. After further experiments with Perl, which convinced me that
267        Perl has bugs and confusions, a closing square bracket is no longer allowed
268        in a POSIX name. This bug also affected patterns with classes that started
269        with full stops.
271    2.  If a pattern such as /(a)b|ac/ is matched against "ac", there is no
272        captured substring, but while checking the failing first alternative,
273        substring 1 is temporarily captured. If the output vector supplied to
274        pcre_exec() was not big enough for this capture, the yield of the function
275        was still zero ("insufficient space for captured substrings"). This cannot
276        be totally fixed without adding another stack variable, which seems a lot
277        of expense for a edge case. However, I have improved the situation in cases
278        such as /(a)(b)x|abc/ matched against "abc", where the return code
279        indicates that fewer than the maximum number of slots in the ovector have
280        been set.
282    3.  Related to (2) above: when there are more back references in a pattern than
283        slots in the output vector, pcre_exec() uses temporary memory during
284        matching, and copies in the captures as far as possible afterwards. It was
285        using the entire output vector, but this conflicts with the specification
286        that only 2/3 is used for passing back captured substrings. Now it uses
287        only the first 2/3, for compatibility. This is, of course, another edge
288        case.
290    4.  Zoltan Herczeg's just-in-time compiler support has been integrated into the
291        main code base, and can be used by building with --enable-jit. When this is
292        done, pcregrep automatically uses it unless --disable-pcregrep-jit or the
293        runtime --no-jit option is given.
295    5.  When the number of matches in a pcre_dfa_exec() run exactly filled the
296        ovector, the return from the function was zero, implying that there were
297        other matches that did not fit. The correct "exactly full" value is now
298        returned.
300    6.  If a subpattern that was called recursively or as a subroutine contained
301        (*PRUNE) or any other control that caused it to give a non-standard return,
302        invalid errors such as "Error -26 (nested recursion at the same subject
303        position)" or even infinite loops could occur.
305    7.  If a pattern such as /a(*SKIP)c|b(*ACCEPT)|/ was studied, it stopped
306        computing the minimum length on reaching *ACCEPT, and so ended up with the
307        wrong value of 1 rather than 0. Further investigation indicates that
308        computing a minimum subject length in the presence of *ACCEPT is difficult
309        (think back references, subroutine calls), and so I have changed the code
310        so that no minimum is registered for a pattern that contains *ACCEPT.
312    8.  If (*THEN) was present in the first (true) branch of a conditional group,
313        it was not handled as intended. [But see 16 below.]
315    9.  Replaced RunTest.bat and CMakeLists.txt with improved versions provided by
316        Sheri Pierce.
318    10. A pathological pattern such as /(*ACCEPT)a/ was miscompiled, thinking that
319        the first byte in a match must be "a".
321    11. Change 17 for 8.13 increased the recursion depth for patterns like
322        /a(?:.)*?a/ drastically. I've improved things by remembering whether a
323        pattern contains any instances of (*THEN). If it does not, the old
324        optimizations are restored. It would be nice to do this on a per-group
325        basis, but at the moment that is not feasible.
327    12. In some environments, the output of pcretest -C is CRLF terminated. This
328        broke RunTest's code that checks for the link size. A single white space
329        character after the value is now allowed for.
331    13. RunTest now checks for the "fr" locale as well as for "fr_FR" and "french".
332        For "fr", it uses the Windows-specific input and output files.
334    14. If (*THEN) appeared in a group that was called recursively or as a
335        subroutine, it did not work as intended. [But see next item.]
337    15. Consider the pattern /A (B(*THEN)C) | D/ where A, B, C, and D are complex
338        pattern fragments (but not containing any | characters). If A and B are
339        matched, but there is a failure in C so that it backtracks to (*THEN), PCRE
340        was behaving differently to Perl. PCRE backtracked into A, but Perl goes to
341        D. In other words, Perl considers parentheses that do not contain any |
342        characters to be part of a surrounding alternative, whereas PCRE was
343        treading (B(*THEN)C) the same as (B(*THEN)C|(*FAIL)) -- which Perl handles
344        differently. PCRE now behaves in the same way as Perl, except in the case
345        of subroutine/recursion calls such as (?1) which have in any case always
346        been different (but PCRE had them first :-).
348    16. Related to 15 above: Perl does not treat the | in a conditional group as
349        creating alternatives. Such a group is treated in the same way as an
350        ordinary group without any | characters when processing (*THEN). PCRE has
351        been changed to match Perl's behaviour.
353    17. If a user had set PCREGREP_COLO(U)R to something other than 1:31, the
354        RunGrepTest script failed.
356    18. Change 22 for version 13 caused atomic groups to use more stack. This is
357        inevitable for groups that contain captures, but it can lead to a lot of
358        stack use in large patterns. The old behaviour has been restored for atomic
359        groups that do not contain any capturing parentheses.
361    19. If the PCRE_NO_START_OPTIMIZE option was set for pcre_compile(), it did not
362        suppress the check for a minimum subject length at run time. (If it was
363        given to pcre_exec() or pcre_dfa_exec() it did work.)
365    20. Fixed an ASCII-dependent infelicity in pcretest that would have made it
366        fail to work when decoding hex characters in data strings in EBCDIC
367        environments.
369    21. It appears that in at least one Mac OS environment, the isxdigit() function
370        is implemented as a macro that evaluates to its argument more than once,
371        contravening the C 90 Standard (I haven't checked a later standard). There
372        was an instance in pcretest which caused it to go wrong when processing
373        \x{...} escapes in subject strings. The has been rewritten to avoid using
374        things like p++ in the argument of isxdigit().
377    Version 8.13 16-Aug-2011
378    ------------------------
380    1.  The Unicode data tables have been updated to Unicode 6.0.0.
382    2.  Two minor typos in pcre_internal.h have been fixed.
384    3.  Added #include <string.h> to pcre_scanner_unittest.cc, pcrecpp.cc, and
385        pcrecpp_unittest.cc. They are needed for strcmp(), memset(), and strchr()
386        in some environments (e.g. Solaris 10/SPARC using Sun Studio 12U2).
388    4.  There were a number of related bugs in the code for matching backrefences
389        caselessly in UTF-8 mode when codes for the characters concerned were
390        different numbers of bytes. For example, U+023A and U+2C65 are an upper
391        and lower case pair, using 2 and 3 bytes, respectively. The main bugs were:
392        (a) A reference to 3 copies of a 2-byte code matched only 2 of a 3-byte
393        code. (b) A reference to 2 copies of a 3-byte code would not match 2 of a
394        2-byte code at the end of the subject (it thought there wasn't enough data
395        left).
397    5.  Comprehensive information about what went wrong is now returned by
398        pcre_exec() and pcre_dfa_exec() when the UTF-8 string check fails, as long
399        as the output vector has at least 2 elements. The offset of the start of
400        the failing character and a reason code are placed in the vector.
402    6.  When the UTF-8 string check fails for pcre_compile(), the offset that is
403        now returned is for the first byte of the failing character, instead of the
404        last byte inspected. This is an incompatible change, but I hope it is small
405        enough not to be a problem. It makes the returned offset consistent with
406        pcre_exec() and pcre_dfa_exec().
408    7.  pcretest now gives a text phrase as well as the error number when
409        pcre_exec() or pcre_dfa_exec() fails; if the error is a UTF-8 check
410        failure, the offset and reason code are output.
412    8.  When \R was used with a maximizing quantifier it failed to skip backwards
413        over a \r\n pair if the subsequent match failed. Instead, it just skipped
414        back over a single character (\n). This seems wrong (because it treated the
415        two characters as a single entity when going forwards), conflicts with the
416        documentation that \R is equivalent to (?>\r\n|\n|...etc), and makes the
417        behaviour of \R* different to (\R)*, which also seems wrong. The behaviour
418        has been changed.
420    9.  Some internal refactoring has changed the processing so that the handling
421        of the PCRE_CASELESS and PCRE_MULTILINE options is done entirely at compile
422        time (the PCRE_DOTALL option was changed this way some time ago: version
423        7.7 change 16). This has made it possible to abolish the OP_OPT op code,
424        which was always a bit of a fudge. It also means that there is one less
425        argument for the match() function, which reduces its stack requirements
426        slightly. This change also fixes an incompatibility with Perl: the pattern
427        (?i:([^b]))(?1) should not match "ab", but previously PCRE gave a match.
429    10. More internal refactoring has drastically reduced the number of recursive
430        calls to match() for possessively repeated groups such as (abc)++ when
431        using pcre_exec().
433    11. While implementing 10, a number of bugs in the handling of groups were
434        discovered and fixed:
436        (?<=(a)+) was not diagnosed as invalid (non-fixed-length lookbehind).
437        (a|)*(?1) gave a compile-time internal error.
438        ((a|)+)+  did not notice that the outer group could match an empty string.
439        (^a|^)+   was not marked as anchored.
440        (.*a|.*)+ was not marked as matching at start or after a newline.
442    12. Yet more internal refactoring has removed another argument from the match()
443        function. Special calls to this function are now indicated by setting a
444        value in a variable in the "match data" data block.
446    13. Be more explicit in pcre_study() instead of relying on "default" for
447        opcodes that mean there is no starting character; this means that when new
448        ones are added and accidentally left out of pcre_study(), testing should
449        pick them up.
451    14. The -s option of pcretest has been documented for ages as being an old
452        synonym of -m (show memory usage). I have changed it to mean "force study
453        for every regex", that is, assume /S for every regex. This is similar to -i
454        and -d etc. It's slightly incompatible, but I'm hoping nobody is still
455        using it. It makes it easier to run collections of tests with and without
456        study enabled, and thereby test pcre_study() more easily. All the standard
457        tests are now run with and without -s (but some patterns can be marked as
458        "never study" - see 20 below).
460    15. When (*ACCEPT) was used in a subpattern that was called recursively, the
461        restoration of the capturing data to the outer values was not happening
462        correctly.
464    16. If a recursively called subpattern ended with (*ACCEPT) and matched an
465        empty string, and PCRE_NOTEMPTY was set, pcre_exec() thought the whole
466        pattern had matched an empty string, and so incorrectly returned a no
467        match.
469    17. There was optimizing code for the last branch of non-capturing parentheses,
470        and also for the obeyed branch of a conditional subexpression, which used
471        tail recursion to cut down on stack usage. Unfortunately, now that there is
472        the possibility of (*THEN) occurring in these branches, tail recursion is
473        no longer possible because the return has to be checked for (*THEN). These
474        two optimizations have therefore been removed. [But see 8.20/11 above.]
476    18. If a pattern containing \R was studied, it was assumed that \R always
477        matched two bytes, thus causing the minimum subject length to be
478        incorrectly computed because \R can also match just one byte.
480    19. If a pattern containing (*ACCEPT) was studied, the minimum subject length
481        was incorrectly computed.
483    20. If /S is present twice on a test pattern in pcretest input, it now
484        *disables* studying, thereby overriding the use of -s on the command line
485        (see 14 above). This is necessary for one or two tests to keep the output
486        identical in both cases.
488    21. When (*ACCEPT) was used in an assertion that matched an empty string and
489        PCRE_NOTEMPTY was set, PCRE applied the non-empty test to the assertion.
491    22. When an atomic group that contained a capturing parenthesis was
492        successfully matched, but the branch in which it appeared failed, the
493        capturing was not being forgotten if a higher numbered group was later
494        captured. For example, /(?>(a))b|(a)c/ when matching "ac" set capturing
495        group 1 to "a", when in fact it should be unset. This applied to multi-
496        branched capturing and non-capturing groups, repeated or not, and also to
497        positive assertions (capturing in negative assertions does not happen
498        in PCRE) and also to nested atomic groups.
500    23. Add the ++ qualifier feature to pcretest, to show the remainder of the
501        subject after a captured substring, to make it easier to tell which of a
502        number of identical substrings has been captured.
504    24. The way atomic groups are processed by pcre_exec() has been changed so that
505        if they are repeated, backtracking one repetition now resets captured
506        values correctly. For example, if ((?>(a+)b)+aabab) is matched against
507        "aaaabaaabaabab" the value of captured group 2 is now correctly recorded as
508        "aaa". Previously, it would have been "a". As part of this code
509        refactoring, the way recursive calls are handled has also been changed.
511    25. If an assertion condition captured any substrings, they were not passed
512        back unless some other capturing happened later. For example, if
513        (?(?=(a))a) was matched against "a", no capturing was returned.
515    26. When studying a pattern that contained subroutine calls or assertions,
516        the code for finding the minimum length of a possible match was handling
517        direct recursions such as (xxx(?1)|yyy) but not mutual recursions (where
518        group 1 called group 2 while simultaneously a separate group 2 called group
519        1). A stack overflow occurred in this case. I have fixed this by limiting
520        the recursion depth to 10.
522    27. Updated RunTest.bat in the distribution to the version supplied by Tom
523        Fortmann. This supports explicit test numbers on the command line, and has
524        argument validation and error reporting.
526    28. An instance of \X with an unlimited repeat could fail if at any point the
527        first character it looked at was a mark character.
529    29. Some minor code refactoring concerning Unicode properties and scripts
530        should reduce the stack requirement of match() slightly.
532    30. Added the '=' option to pcretest to check the setting of unused capturing
533        slots at the end of the pattern, which are documented as being -1, but are
534        not included in the return count.
536    31. If \k was not followed by a braced, angle-bracketed, or quoted name, PCRE
537        compiled something random. Now it gives a compile-time error (as does
538        Perl).
540    32. A *MARK encountered during the processing of a positive assertion is now
541        recorded and passed back (compatible with Perl).
543    33. If --only-matching or --colour was set on a pcregrep call whose pattern
544        had alternative anchored branches, the search for a second match in a line
545        was done as if at the line start. Thus, for example, /^01|^02/ incorrectly
546        matched the line "0102" twice. The same bug affected patterns that started
547        with a backwards assertion. For example /\b01|\b02/ also matched "0102"
548        twice.
550    34. Previously, PCRE did not allow quantification of assertions. However, Perl
551        does, and because of capturing effects, quantifying parenthesized
552        assertions may at times be useful. Quantifiers are now allowed for
553        parenthesized assertions.
555    35. A minor code tidy in pcre_compile() when checking options for \R usage.
557    36. \g was being checked for fancy things in a character class, when it should
558        just be a literal "g".
560    37. PCRE was rejecting [:a[:digit:]] whereas Perl was not. It seems that the
561        appearance of a nested POSIX class supersedes an apparent external class.
562        For example, [:a[:digit:]b:] matches "a", "b", ":", or a digit. Also,
563        unescaped square brackets may also appear as part of class names. For
564        example, [:a[:abc]b:] gives unknown class "[:abc]b:]". PCRE now behaves
565        more like Perl. (But see 8.20/1 above.)
567    38. PCRE was giving an error for \N with a braced quantifier such as {1,} (this
568        was because it thought it was \N{name}, which is not supported).
570    39. Add minix to OS list not supporting the -S option in pcretest.
572    40. PCRE tries to detect cases of infinite recursion at compile time, but it
573        cannot analyze patterns in sufficient detail to catch mutual recursions
574        such as ((?1))((?2)). There is now a runtime test that gives an error if a
575        subgroup is called recursively as a subpattern for a second time at the
576        same position in the subject string. In previous releases this might have
577        been caught by the recursion limit, or it might have run out of stack.
579    41. A pattern such as /(?(R)a+|(?R)b)/ is quite safe, as the recursion can
580        happen only once. PCRE was, however incorrectly giving a compile time error
581        "recursive call could loop indefinitely" because it cannot analyze the
582        pattern in sufficient detail. The compile time test no longer happens when
583        PCRE is compiling a conditional subpattern, but actual runaway loops are
584        now caught at runtime (see 40 above).
586    42. It seems that Perl allows any characters other than a closing parenthesis
587        to be part of the NAME in (*MARK:NAME) and other backtracking verbs. PCRE
588        has been changed to be the same.
590    43. Updated configure.ac to put in more quoting round AC_LANG_PROGRAM etc. so
591        as not to get warnings when autogen.sh is called. Also changed
592        AC_PROG_LIBTOOL (deprecated) to LT_INIT (the current macro).
594    44. To help people who use pcregrep to scan files containing exceedingly long
595        lines, the following changes have been made:
597        (a) The default value of the buffer size parameter has been increased from
598            8K to 20K. (The actual buffer used is three times this size.)
600        (b) The default can be changed by ./configure --with-pcregrep-bufsize when
601            PCRE is built.
603        (c) A --buffer-size=n option has been added to pcregrep, to allow the size
604            to be set at run time.
606        (d) Numerical values in pcregrep options can be followed by K or M, for
607            example --buffer-size=50K.
609        (e) If a line being scanned overflows pcregrep's buffer, an error is now
610            given and the return code is set to 2.
612    45. Add a pointer to the latest mark to the callout data block.
614    46. The pattern /.(*F)/, when applied to "abc" with PCRE_PARTIAL_HARD, gave a
615        partial match of an empty string instead of no match. This was specific to
616        the use of ".".
618    47. The pattern /f.*/8s, when applied to "for" with PCRE_PARTIAL_HARD, gave a
619        complete match instead of a partial match. This bug was dependent on both
620        the PCRE_UTF8 and PCRE_DOTALL options being set.
622    48. For a pattern such as /\babc|\bdef/ pcre_study() was failing to set up the
623        starting byte set, because \b was not being ignored.
626    Version 8.12 15-Jan-2011
627    ------------------------
629    1.  Fixed some typos in the markup of the man pages, and wrote a script that
630        checks for such things as part of the documentation building process.
632    2.  On a big-endian 64-bit system, pcregrep did not correctly process the
633        --match-limit and --recursion-limit options (added for 8.11). In
634        particular, this made one of the standard tests fail. (The integer value
635        went into the wrong half of a long int.)
637    3.  If the --colour option was given to pcregrep with -v (invert match), it
638        did strange things, either producing crazy output, or crashing. It should,
639        of course, ignore a request for colour when reporting lines that do not
640        match.
642    4.  Another pcregrep bug caused similar problems if --colour was specified with
643        -M (multiline) and the pattern match finished with a line ending.
645    5.  In pcregrep, when a pattern that ended with a literal newline sequence was
646        matched in multiline mode, the following line was shown as part of the
647        match. This seems wrong, so I have changed it.
649    6.  Another pcregrep bug in multiline mode, when --colour was specified, caused
650        the check for further matches in the same line (so they could be coloured)
651        to overrun the end of the current line. If another match was found, it was
652        incorrectly shown (and then shown again when found in the next line).
654    7.  If pcregrep was compiled under Windows, there was a reference to the
655        function pcregrep_exit() before it was defined. I am assuming this was
656        the cause of the "error C2371: 'pcregrep_exit' : redefinition;" that was
657        reported by a user. I've moved the definition above the reference.
660    Version 8.11 10-Dec-2010
661    ------------------------
663    1.  (*THEN) was not working properly if there were untried alternatives prior
664        to it in the current branch. For example, in ((a|b)(*THEN)(*F)|c..) it
665        backtracked to try for "b" instead of moving to the next alternative branch
666        at the same level (in this case, to look for "c"). The Perl documentation
667        is clear that when (*THEN) is backtracked onto, it goes to the "next
668        alternative in the innermost enclosing group".
670    2.  (*COMMIT) was not overriding (*THEN), as it does in Perl. In a pattern
671        such as   (A(*COMMIT)B(*THEN)C|D)  any failure after matching A should
672        result in overall failure. Similarly, (*COMMIT) now overrides (*PRUNE) and
673        (*SKIP), (*SKIP) overrides (*PRUNE) and (*THEN), and (*PRUNE) overrides
674        (*THEN).
676    3.  If \s appeared in a character class, it removed the VT character from
677        the class, even if it had been included by some previous item, for example
678        in [\x00-\xff\s]. (This was a bug related to the fact that VT is not part
679        of \s, but is part of the POSIX "space" class.)
681    4.  A partial match never returns an empty string (because you can always
682        match an empty string at the end of the subject); however the checking for
683        an empty string was starting at the "start of match" point. This has been
684        changed to the "earliest inspected character" point, because the returned
685        data for a partial match starts at this character. This means that, for
686        example, /(?<=abc)def/ gives a partial match for the subject "abc"
687        (previously it gave "no match").
689    5.  Changes have been made to the way PCRE_PARTIAL_HARD affects the matching
690        of $, \z, \Z, \b, and \B. If the match point is at the end of the string,
691        previously a full match would be given. However, setting PCRE_PARTIAL_HARD
692        has an implication that the given string is incomplete (because a partial
693        match is preferred over a full match). For this reason, these items now
694        give a partial match in this situation. [Aside: previously, the one case
695        /t\b/ matched against "cat" with PCRE_PARTIAL_HARD set did return a partial
696        match rather than a full match, which was wrong by the old rules, but is
697        now correct.]
699    6.  There was a bug in the handling of #-introduced comments, recognized when
700        PCRE_EXTENDED is set, when PCRE_NEWLINE_ANY and PCRE_UTF8 were also set.
701        If a UTF-8 multi-byte character included the byte 0x85 (e.g. +U0445, whose
702        UTF-8 encoding is 0xd1,0x85), this was misinterpreted as a newline when
703        scanning for the end of the comment. (*Character* 0x85 is an "any" newline,
704        but *byte* 0x85 is not, in UTF-8 mode). This bug was present in several
705        places in pcre_compile().
707    7.  Related to (6) above, when pcre_compile() was skipping #-introduced
708        comments when looking ahead for named forward references to subpatterns,
709        the only newline sequence it recognized was NL. It now handles newlines
710        according to the set newline convention.
712    8.  SunOS4 doesn't have strerror() or strtoul(); pcregrep dealt with the
713        former, but used strtoul(), whereas pcretest avoided strtoul() but did not
714        cater for a lack of strerror(). These oversights have been fixed.
716    9.  Added --match-limit and --recursion-limit to pcregrep.
718    10. Added two casts needed to build with Visual Studio when NO_RECURSE is set.
720    11. When the -o option was used, pcregrep was setting a return code of 1, even
721        when matches were found, and --line-buffered was not being honoured.
723    12. Added an optional parentheses number to the -o and --only-matching options
724        of pcregrep.
726    13. Imitating Perl's /g action for multiple matches is tricky when the pattern
727        can match an empty string. The code to do it in pcretest and pcredemo
728        needed fixing:
730        (a) When the newline convention was "crlf", pcretest got it wrong, skipping
731            only one byte after an empty string match just before CRLF (this case
732            just got forgotten; "any" and "anycrlf" were OK).
734        (b) The pcretest code also had a bug, causing it to loop forever in UTF-8
735            mode when an empty string match preceded an ASCII character followed by
736            a non-ASCII character. (The code for advancing by one character rather
737            than one byte was nonsense.)
739        (c) The pcredemo.c sample program did not have any code at all to handle
740            the cases when CRLF is a valid newline sequence.
742    14. Neither pcre_exec() nor pcre_dfa_exec() was checking that the value given
743        as a starting offset was within the subject string. There is now a new
744        error, PCRE_ERROR_BADOFFSET, which is returned if the starting offset is
745        negative or greater than the length of the string. In order to test this,
746        pcretest is extended to allow the setting of negative starting offsets.
748    15. In both pcre_exec() and pcre_dfa_exec() the code for checking that the
749        starting offset points to the beginning of a UTF-8 character was
750        unnecessarily clumsy. I tidied it up.
752    16. Added PCRE_ERROR_SHORTUTF8 to make it possible to distinguish between a
753        bad UTF-8 sequence and one that is incomplete when using PCRE_PARTIAL_HARD.
755    17. Nobody had reported that the --include_dir option, which was added in
756        release 7.7 should have been called --include-dir (hyphen, not underscore)
757        for compatibility with GNU grep. I have changed it to --include-dir, but
758        left --include_dir as an undocumented synonym, and the same for
759        --exclude-dir, though that is not available in GNU grep, at least as of
760        release 2.5.4.
762    18. At a user's suggestion, the macros GETCHAR and friends (which pick up UTF-8
763        characters from a string of bytes) have been redefined so as not to use
764        loops, in order to improve performance in some environments. At the same
765        time, I abstracted some of the common code into auxiliary macros to save
766        repetition (this should not affect the compiled code).
768    19. If \c was followed by a multibyte UTF-8 character, bad things happened. A
769        compile-time error is now given if \c is not followed by an ASCII
770        character, that is, a byte less than 128. (In EBCDIC mode, the code is
771        different, and any byte value is allowed.)
773    20. Recognize (*NO_START_OPT) at the start of a pattern to set the PCRE_NO_
774        START_OPTIMIZE option, which is now allowed at compile time - but just
775        passed through to pcre_exec() or pcre_dfa_exec(). This makes it available
776        to pcregrep and other applications that have no direct access to PCRE
777        options. The new /Y option in pcretest sets this option when calling
778        pcre_compile().
780    21. Change 18 of release 8.01 broke the use of named subpatterns for recursive
781        back references. Groups containing recursive back references were forced to
782        be atomic by that change, but in the case of named groups, the amount of
783        memory required was incorrectly computed, leading to "Failed: internal
784        error: code overflow". This has been fixed.
786    22. Some patches to pcre_stringpiece.h, pcre_stringpiece_unittest.cc, and
787        pcretest.c, to avoid build problems in some Borland environments.
790    Version 8.10 25-Jun-2010
791    ------------------------
793    1.  Added support for (*MARK:ARG) and for ARG additions to PRUNE, SKIP, and
794        THEN.
796    2.  (*ACCEPT) was not working when inside an atomic group.
798    3.  Inside a character class, \B is treated as a literal by default, but
799        faulted if PCRE_EXTRA is set. This mimics Perl's behaviour (the -w option
800        causes the error). The code is unchanged, but I tidied the documentation.
802    4.  Inside a character class, PCRE always treated \R and \X as literals,
803        whereas Perl faults them if its -w option is set. I have changed PCRE so
804        that it faults them when PCRE_EXTRA is set.
806    5.  Added support for \N, which always matches any character other than
807        newline. (It is the same as "." when PCRE_DOTALL is not set.)
809    6.  When compiling pcregrep with newer versions of gcc which may have
810        FORTIFY_SOURCE set, several warnings "ignoring return value of 'fwrite',
811        declared with attribute warn_unused_result" were given. Just casting the
812        result to (void) does not stop the warnings; a more elaborate fudge is
813        needed. I've used a macro to implement this.
815    7.  Minor change to pcretest.c to avoid a compiler warning.
817    8.  Added four artifical Unicode properties to help with an option to make
818        \s etc use properties (see next item). The new properties are: Xan
819        (alphanumeric), Xsp (Perl space), Xps (POSIX space), and Xwd (word).
821    9.  Added PCRE_UCP to make \b, \d, \s, \w, and certain POSIX character classes
822        use Unicode properties. (*UCP) at the start of a pattern can be used to set
823        this option. Modified pcretest to add /W to test this facility. Added
824        REG_UCP to make it available via the POSIX interface.
826    10. Added --line-buffered to pcregrep.
828    11. In UTF-8 mode, if a pattern that was compiled with PCRE_CASELESS was
829        studied, and the match started with a letter with a code point greater than
830        127 whose first byte was different to the first byte of the other case of
831        the letter, the other case of this starting letter was not recognized
832        (#976).
834    12. If a pattern that was studied started with a repeated Unicode property
835        test, for example, \p{Nd}+, there was the theoretical possibility of
836        setting up an incorrect bitmap of starting bytes, but fortunately it could
837        not have actually happened in practice until change 8 above was made (it
838        added property types that matched character-matching opcodes).
840    13. pcre_study() now recognizes \h, \v, and \R when constructing a bit map of
841        possible starting bytes for non-anchored patterns.
843    14. Extended the "auto-possessify" feature of pcre_compile(). It now recognizes
844        \R, and also a number of cases that involve Unicode properties, both
845        explicit and implicit when PCRE_UCP is set.
847    15. If a repeated Unicode property match (e.g. \p{Lu}*) was used with non-UTF-8
848        input, it could crash or give wrong results if characters with values
849        greater than 0xc0 were present in the subject string. (Detail: it assumed
850        UTF-8 input when processing these items.)
852    16. Added a lot of (int) casts to avoid compiler warnings in systems where
853        size_t is 64-bit (#991).
855    17. Added a check for running out of memory when PCRE is compiled with
856        --disable-stack-for-recursion (#990).
858    18. If the last data line in a file for pcretest does not have a newline on
859        the end, a newline was missing in the output.
861    19. The default pcre_chartables.c file recognizes only ASCII characters (values
862        less than 128) in its various bitmaps. However, there is a facility for
863        generating tables according to the current locale when PCRE is compiled. It
864        turns out that in some environments, 0x85 and 0xa0, which are Unicode space
865        characters, are recognized by isspace() and therefore were getting set in
866        these tables, and indeed these tables seem to approximate to ISO 8859. This
867        caused a problem in UTF-8 mode when pcre_study() was used to create a list
868        of bytes that can start a match. For \s, it was including 0x85 and 0xa0,
869        which of course cannot start UTF-8 characters. I have changed the code so
870        that only real ASCII characters (less than 128) and the correct starting
871        bytes for UTF-8 encodings are set for characters greater than 127 when in
872        UTF-8 mode. (When PCRE_UCP is set - see 9 above - the code is different
873        altogether.)
875    20. Added the /T option to pcretest so as to be able to run tests with non-
876        standard character tables, thus making it possible to include the tests
877        used for 19 above in the standard set of tests.
879    21. A pattern such as (?&t)(?#()(?(DEFINE)(?<t>a)) which has a forward
880        reference to a subpattern the other side of a comment that contains an
881        opening parenthesis caused either an internal compiling error, or a
882        reference to the wrong subpattern.
885    Version 8.02 19-Mar-2010
886    ------------------------
888    1.  The Unicode data tables have been updated to Unicode 5.2.0.
890    2.  Added the option --libs-cpp to pcre-config, but only when C++ support is
891        configured.
893    3.  Updated the licensing terms in the pcregexp.pas file, as agreed with the
894        original author of that file, following a query about its status.
896    4.  On systems that do not have stdint.h (e.g. Solaris), check for and include
897        inttypes.h instead. This fixes a bug that was introduced by change 8.01/8.
899    5.  A pattern such as (?&t)*+(?(DEFINE)(?<t>.)) which has a possessive
900        quantifier applied to a forward-referencing subroutine call, could compile
901        incorrect code or give the error "internal error: previously-checked
902        referenced subpattern not found".
904    6.  Both MS Visual Studio and Symbian OS have problems with initializing
905        variables to point to external functions. For these systems, therefore,
906        pcre_malloc etc. are now initialized to local functions that call the
907        relevant global functions.
909    7.  There were two entries missing in the vectors called coptable and poptable
910        in pcre_dfa_exec.c. This could lead to memory accesses outsize the vectors.
911        I've fixed the data, and added a kludgy way of testing at compile time that
912        the lengths are correct (equal to the number of opcodes).
914    8.  Following on from 7, I added a similar kludge to check the length of the
915        eint vector in pcreposix.c.
917    9.  Error texts for pcre_compile() are held as one long string to avoid too
918        much relocation at load time. To find a text, the string is searched,
919        counting zeros. There was no check for running off the end of the string,
920        which could happen if a new error number was added without updating the
921        string.
923    10. \K gave a compile-time error if it appeared in a lookbehind assersion.
925    11. \K was not working if it appeared in an atomic group or in a group that
926        was called as a "subroutine", or in an assertion. Perl 5.11 documents that
927        \K is "not well defined" if used in an assertion. PCRE now accepts it if
928        the assertion is positive, but not if it is negative.
930    12. Change 11 fortuitously reduced the size of the stack frame used in the
931        "match()" function of pcre_exec.c by one pointer. Forthcoming
932        implementation of support for (*MARK) will need an extra pointer on the
933        stack; I have reserved it now, so that the stack frame size does not
934        decrease.
936    13. A pattern such as (?P<L1>(?P<L2>0)|(?P>L2)(?P>L1)) in which the only other
937        item in branch that calls a recursion is a subroutine call - as in the
938        second branch in the above example - was incorrectly given the compile-
939        time error "recursive call could loop indefinitely" because pcre_compile()
940        was not correctly checking the subroutine for matching a non-empty string.
942    14. The checks for overrunning compiling workspace could trigger after an
943        overrun had occurred. This is a "should never occur" error, but it can be
944        triggered by pathological patterns such as hundreds of nested parentheses.
945        The checks now trigger 100 bytes before the end of the workspace.
947    15. Fix typo in configure.ac: "srtoq" should be "strtoq".
950    Version 8.01 19-Jan-2010
951    ------------------------
953    1.  If a pattern contained a conditional subpattern with only one branch (in
954        particular, this includes all (*DEFINE) patterns), a call to pcre_study()
955        computed the wrong minimum data length (which is of course zero for such
956        subpatterns). This could cause incorrect "no match" results.
958    2.  For patterns such as (?i)a(?-i)b|c where an option setting at the start of
959        the pattern is reset in the first branch, pcre_compile() failed with
960        "internal error: code overflow at offset...". This happened only when
961        the reset was to the original external option setting. (An optimization
962        abstracts leading options settings into an external setting, which was the
963        cause of this.)
965    3.  A pattern such as ^(?!a(*SKIP)b) where a negative assertion contained one
966        of the verbs SKIP, PRUNE, or COMMIT, did not work correctly. When the
967        assertion pattern did not match (meaning that the assertion was true), it
968        was incorrectly treated as false if the SKIP had been reached during the
969        matching. This also applied to assertions used as conditions.
971    4.  If an item that is not supported by pcre_dfa_exec() was encountered in an
972        assertion subpattern, including such a pattern used as a condition,
973        unpredictable results occurred, instead of the error return
976    5.  The C++ GlobalReplace function was not working like Perl for the special
977        situation when an empty string is matched. It now does the fancy magic
978        stuff that is necessary.
980    6.  In pcre_internal.h, obsolete includes to setjmp.h and stdarg.h have been
981        removed. (These were left over from very, very early versions of PCRE.)
983    7.  Some cosmetic changes to the code to make life easier when compiling it
984        as part of something else:
986        (a) Change DEBUG to PCRE_DEBUG.
988        (b) In pcre_compile(), rename the member of the "branch_chain" structure
989            called "current" as "current_branch", to prevent a collision with the
990            Linux macro when compiled as a kernel module.
992        (c) In pcre_study(), rename the function set_bit() as set_table_bit(), to
993            prevent a collision with the Linux macro when compiled as a kernel
994            module.
996    8.  In pcre_compile() there are some checks for integer overflows that used to
997        cast potentially large values to (double). This has been changed to that
998        when building, a check for int64_t is made, and if it is found, it is used
999        instead, thus avoiding the use of floating point arithmetic. (There is no
1000        other use of FP in PCRE.) If int64_t is not found, the fallback is to
1001        double.
1003    9.  Added two casts to avoid signed/unsigned warnings from VS Studio Express
1004        2005 (difference between two addresses compared to an unsigned value).
1006    10. Change the standard AC_CHECK_LIB test for libbz2 in configure.ac to a
1007        custom one, because of the following reported problem in Windows:
1009          - libbz2 uses the Pascal calling convention (WINAPI) for the functions
1010              under Win32.
1011          - The standard autoconf AC_CHECK_LIB fails to include "bzlib.h",
1012              therefore missing the function definition.
1013          - The compiler thus generates a "C" signature for the test function.
1014          - The linker fails to find the "C" function.
1015          - PCRE fails to configure if asked to do so against libbz2.
1017    11. When running libtoolize from libtool-2.2.6b as part of autogen.sh, these
1018        messages were output:
1020          Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
1021          rerunning libtoolize, to keep the correct libtool macros in-tree.
1022          Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
1024        I have done both of these things.
1026    12. Although pcre_dfa_exec() does not use nearly as much stack as pcre_exec()
1027        most of the time, it *can* run out if it is given a pattern that contains a
1028        runaway infinite recursion. I updated the discussion in the pcrestack man
1029        page.
1031    13. Now that we have gone to the x.xx style of version numbers, the minor
1032        version may start with zero. Using 08 or 09 is a bad idea because users
1033        might check the value of PCRE_MINOR in their code, and 08 or 09 may be
1034        interpreted as invalid octal numbers. I've updated the previous comment in
1035        configure.ac, and also added a check that gives an error if 08 or 09 are
1036        used.
1038    14. Change 8.00/11 was not quite complete: code had been accidentally omitted,
1039        causing partial matching to fail when the end of the subject matched \W
1040        in a UTF-8 pattern where \W was quantified with a minimum of 3.
1042    15. There were some discrepancies between the declarations in pcre_internal.h
1043        of _pcre_is_newline(), _pcre_was_newline(), and _pcre_valid_utf8() and
1044        their definitions. The declarations used "const uschar *" and the
1045        definitions used USPTR. Even though USPTR is normally defined as "const
1046        unsigned char *" (and uschar is typedeffed as "unsigned char"), it was
1047        reported that: "This difference in casting confuses some C++ compilers, for
1048        example, SunCC recognizes above declarations as different functions and
1049        generates broken code for hbpcre." I have changed the declarations to use
1050        USPTR.
1052    16. GNU libtool is named differently on some systems. The autogen.sh script now
1053        tries several variants such as glibtoolize (MacOSX) and libtoolize1x
1054        (FreeBSD).
1056    17. Applied Craig's patch that fixes an HP aCC compile error in pcre 8.00
1057        (strtoXX undefined when compiling pcrecpp.cc). The patch contains this
1058        comment: "Figure out how to create a longlong from a string: strtoll and
1059        equivalent. It's not enough to call AC_CHECK_FUNCS: hpux has a strtoll, for
1060        instance, but it only takes 2 args instead of 3!"
1062    18. A subtle bug concerned with back references has been fixed by a change of
1063        specification, with a corresponding code fix. A pattern such as
1064        ^(xa|=?\1a)+$ which contains a back reference inside the group to which it
1065        refers, was giving matches when it shouldn't. For example, xa=xaaa would
1066        match that pattern. Interestingly, Perl (at least up to 5.11.3) has the
1067        same bug. Such groups have to be quantified to be useful, or contained
1068        inside another quantified group. (If there's no repetition, the reference
1069        can never match.) The problem arises because, having left the group and
1070        moved on to the rest of the pattern, a later failure that backtracks into
1071        the group uses the captured value from the final iteration of the group
1072        rather than the correct earlier one. I have fixed this in PCRE by forcing
1073        any group that contains a reference to itself to be an atomic group; that
1074        is, there cannot be any backtracking into it once it has completed. This is
1075        similar to recursive and subroutine calls.
1078    Version 8.00 19-Oct-09
1079    ----------------------
1081    1.  The table for translating pcre_compile() error codes into POSIX error codes
1082        was out-of-date, and there was no check on the pcre_compile() error code
1083        being within the table. This could lead to an OK return being given in
1084        error.
1086    2.  Changed the call to open a subject file in pcregrep from fopen(pathname,
1087        "r") to fopen(pathname, "rb"), which fixed a problem with some of the tests
1088        in a Windows environment.
1090    3.  The pcregrep --count option prints the count for each file even when it is
1091        zero, as does GNU grep. However, pcregrep was also printing all files when
1092        --files-with-matches was added. Now, when both options are given, it prints
1093        counts only for those files that have at least one match. (GNU grep just
1094        prints the file name in this circumstance, but including the count seems
1095        more useful - otherwise, why use --count?) Also ensured that the
1096        combination -clh just lists non-zero counts, with no names.
1098    4.  The long form of the pcregrep -F option was incorrectly implemented as
1099        --fixed_strings instead of --fixed-strings. This is an incompatible change,
1100        but it seems right to fix it, and I didn't think it was worth preserving
1101        the old behaviour.
1103    5.  The command line items --regex=pattern and --regexp=pattern were not
1104        recognized by pcregrep, which required --regex pattern or --regexp pattern
1105        (with a space rather than an '='). The man page documented the '=' forms,
1106        which are compatible with GNU grep; these now work.
1108    6.  No libpcreposix.pc file was created for pkg-config; there was just
1109        libpcre.pc and libpcrecpp.pc. The omission has been rectified.
1111    7.  Added #ifndef SUPPORT_UCP into the pcre_ucd.c module, to reduce its size
1112        when UCP support is not needed, by modifying the Python script that
1113        generates it from Unicode data files. This should not matter if the module
1114        is correctly used as a library, but I received one complaint about 50K of
1115        unwanted data. My guess is that the person linked everything into his
1116        program rather than using a library. Anyway, it does no harm.
1118    8.  A pattern such as /\x{123}{2,2}+/8 was incorrectly compiled; the trigger
1119        was a minimum greater than 1 for a wide character in a possessive
1120        repetition. The same bug could also affect patterns like /(\x{ff}{0,2})*/8
1121        which had an unlimited repeat of a nested, fixed maximum repeat of a wide
1122        character. Chaos in the form of incorrect output or a compiling loop could
1123        result.
1125    9.  The restrictions on what a pattern can contain when partial matching is
1126        requested for pcre_exec() have been removed. All patterns can now be
1127        partially matched by this function. In addition, if there are at least two
1128        slots in the offset vector, the offset of the earliest inspected character
1129        for the match and the offset of the end of the subject are set in them when
1130        PCRE_ERROR_PARTIAL is returned.
1132    10. Partial matching has been split into two forms: PCRE_PARTIAL_SOFT, which is
1133        synonymous with PCRE_PARTIAL, for backwards compatibility, and
1134        PCRE_PARTIAL_HARD, which causes a partial match to supersede a full match,
1135        and may be more useful for multi-segment matching.
1137    11. Partial matching with pcre_exec() is now more intuitive. A partial match
1138        used to be given if ever the end of the subject was reached; now it is
1139        given only if matching could not proceed because another character was
1140        needed. This makes a difference in some odd cases such as Z(*FAIL) with the
1141        string "Z", which now yields "no match" instead of "partial match". In the
1142        case of pcre_dfa_exec(), "no match" is given if every matching path for the
1143        final character ended with (*FAIL).
1145    12. Restarting a match using pcre_dfa_exec() after a partial match did not work
1146        if the pattern had a "must contain" character that was already found in the
1147        earlier partial match, unless partial matching was again requested. For
1148        example, with the pattern /dog.(body)?/, the "must contain" character is
1149        "g". If the first part-match was for the string "dog", restarting with
1150        "sbody" failed. This bug has been fixed.
1152    13. The string returned by pcre_dfa_exec() after a partial match has been
1153        changed so that it starts at the first inspected character rather than the
1154        first character of the match. This makes a difference only if the pattern
1155        starts with a lookbehind assertion or \b or \B (\K is not supported by
1156        pcre_dfa_exec()). It's an incompatible change, but it makes the two
1157        matching functions compatible, and I think it's the right thing to do.
1159    14. Added a pcredemo man page, created automatically from the pcredemo.c file,
1160        so that the demonstration program is easily available in environments where
1161        PCRE has not been installed from source.
1163    15. Arranged to add -DPCRE_STATIC to cflags in libpcre.pc, libpcreposix.cp,
1164        libpcrecpp.pc and pcre-config when PCRE is not compiled as a shared
1165        library.
1167    16. Added REG_UNGREEDY to the pcreposix interface, at the request of a user.
1168        It maps to PCRE_UNGREEDY. It is not, of course, POSIX-compatible, but it
1169        is not the first non-POSIX option to be added. Clearly some people find
1170        these options useful.
1172    17. If a caller to the POSIX matching function regexec() passes a non-zero
1173        value for nmatch with a NULL value for pmatch, the value of
1174        nmatch is forced to zero.
1176    18. RunGrepTest did not have a test for the availability of the -u option of
1177        the diff command, as RunTest does. It now checks in the same way as
1178        RunTest, and also checks for the -b option.
1180    19. If an odd number of negated classes containing just a single character
1181        interposed, within parentheses, between a forward reference to a named
1182        subpattern and the definition of the subpattern, compilation crashed with
1183        an internal error, complaining that it could not find the referenced
1184        subpattern. An example of a crashing pattern is /(?&A)(([^m])(?<A>))/.
1185        [The bug was that it was starting one character too far in when skipping
1186        over the character class, thus treating the ] as data rather than
1187        terminating the class. This meant it could skip too much.]
1189    20. Added PCRE_NOTEMPTY_ATSTART in order to be able to correctly implement the
1190        /g option in pcretest when the pattern contains \K, which makes it possible
1191        to have an empty string match not at the start, even when the pattern is
1192        anchored. Updated pcretest and pcredemo to use this option.
1194    21. If the maximum number of capturing subpatterns in a recursion was greater
1195        than the maximum at the outer level, the higher number was returned, but
1196        with unset values at the outer level. The correct (outer level) value is
1197        now given.
1199    22. If (*ACCEPT) appeared inside capturing parentheses, previous releases of
1200        PCRE did not set those parentheses (unlike Perl). I have now found a way to
1201        make it do so. The string so far is captured, making this feature
1202        compatible with Perl.
1204    23. The tests have been re-organized, adding tests 11 and 12, to make it
1205        possible to check the Perl 5.10 features against Perl 5.10.
1207    24. Perl 5.10 allows subroutine calls in lookbehinds, as long as the subroutine
1208        pattern matches a fixed length string. PCRE did not allow this; now it
1209        does. Neither allows recursion.
1211    25. I finally figured out how to implement a request to provide the minimum
1212        length of subject string that was needed in order to match a given pattern.
1213        (It was back references and recursion that I had previously got hung up
1214        on.) This code has now been added to pcre_study(); it finds a lower bound
1215        to the length of subject needed. It is not necessarily the greatest lower
1216        bound, but using it to avoid searching strings that are too short does give
1217        some useful speed-ups. The value is available to calling programs via
1218        pcre_fullinfo().
1220    26. While implementing 25, I discovered to my embarrassment that pcretest had
1221        not been passing the result of pcre_study() to pcre_dfa_exec(), so the
1222        study optimizations had never been tested with that matching function.
1223        Oops. What is worse, even when it was passed study data, there was a bug in
1224        pcre_dfa_exec() that meant it never actually used it. Double oops. There
1225        were also very few tests of studied patterns with pcre_dfa_exec().
1227    27. If (?| is used to create subpatterns with duplicate numbers, they are now
1228        allowed to have the same name, even if PCRE_DUPNAMES is not set. However,
1229        on the other side of the coin, they are no longer allowed to have different
1230        names, because these cannot be distinguished in PCRE, and this has caused
1231        confusion. (This is a difference from Perl.)
1233    28. When duplicate subpattern names are present (necessarily with different
1234        numbers, as required by 27 above), and a test is made by name in a
1235        conditional pattern, either for a subpattern having been matched, or for
1236        recursion in such a pattern, all the associated numbered subpatterns are
1237        tested, and the overall condition is true if the condition is true for any
1238        one of them. This is the way Perl works, and is also more like the way
1239        testing by number works.
1242    Version 7.9 11-Apr-09
1243  ---------------------  ---------------------
1245  1.  When building with support for bzlib/zlib (pcregrep) and/or readline  1.  When building with support for bzlib/zlib (pcregrep) and/or readline
1246      (pcretest), all targets were linked against these libraries. This included      (pcretest), all targets were linked against these libraries. This included
1247      libpcre, libpcreposix, and libpcrecpp, even though they do not use these      libpcre, libpcreposix, and libpcrecpp, even though they do not use these
1248      libraries. This caused unwanted dependencies to be created. This problem      libraries. This caused unwanted dependencies to be created. This problem
1249      has been fixed, and now only pcregrep is linked with bzlib/zlib and only      has been fixed, and now only pcregrep is linked with bzlib/zlib and only
1250      pcretest is linked with readline.      pcretest is linked with readline.
1252  2.  The "typedef int BOOL" in pcre_internal.h that was included inside the  2.  The "typedef int BOOL" in pcre_internal.h that was included inside the
1253      "#ifndef FALSE" condition by an earlier change (probably 7.8/18) has been      "#ifndef FALSE" condition by an earlier change (probably 7.8/18) has been
1254      moved outside it again, because FALSE and TRUE are already defined in AIX,      moved outside it again, because FALSE and TRUE are already defined in AIX,
1255      but BOOL is not.      but BOOL is not.
1257  3.  The pcre_config() function was treating the PCRE_MATCH_LIMIT and  3.  The pcre_config() function was treating the PCRE_MATCH_LIMIT and
1258      PCRE_MATCH_LIMIT_RETURSION values as ints, when they should be long ints.      PCRE_MATCH_LIMIT_RECURSION values as ints, when they should be long ints.
1260  4.  The pcregrep documentation said spaces were inserted as well as colons (or  4.  The pcregrep documentation said spaces were inserted as well as colons (or
1261      hyphens) following file names and line numbers when outputting matching      hyphens) following file names and line numbers when outputting matching
1262      lines. This is not true; no spaces are inserted. I have also clarified the      lines. This is not true; no spaces are inserted. I have also clarified the
1263      wording for the --colour (or --color) option.      wording for the --colour (or --color) option.
1265  5.  In pcregrep, when --colour was used with -o, the list of matching strings  5.  In pcregrep, when --colour was used with -o, the list of matching strings
1266      was not coloured; this is different to GNU grep, so I have changed it to be      was not coloured; this is different to GNU grep, so I have changed it to be
1267      the same.      the same.
1269  6.  When --colo(u)r was used in pcregrep, only the first matching substring in  6.  When --colo(u)r was used in pcregrep, only the first matching substring in
1270      each matching line was coloured. Now it goes on to look for further matches      each matching line was coloured. Now it goes on to look for further matches
1271      of any of the test patterns, which is the same behaviour as GNU grep.      of any of the test patterns, which is the same behaviour as GNU grep.
1273  7.  A pattern that could match an empty string could cause pcregrep to loop; it  7.  A pattern that could match an empty string could cause pcregrep to loop; it
1274      doesn't make sense to accept an empty string match in pcregrep, so I have      doesn't make sense to accept an empty string match in pcregrep, so I have
1275      locked it out (using PCRE's PCRE_NOTEMPTY option). By experiment, this      locked it out (using PCRE's PCRE_NOTEMPTY option). By experiment, this
1276      seems to be how GNU grep behaves.      seems to be how GNU grep behaves.
1278  8.  The pattern (?(?=.*b)b|^) was incorrectly compiled as "match must be at  8.  The pattern (?(?=.*b)b|^) was incorrectly compiled as "match must be at
1279      start or after a newline", because the conditional assertion was not being      start or after a newline", because the conditional assertion was not being
1280      correctly handled. The rule now is that both the assertion and what follows      correctly handled. The rule now is that both the assertion and what follows
1281      in the first alternative must satisfy the test.      in the first alternative must satisfy the test.
1283  9.  If auto-callout was enabled in a pattern with a conditional group, PCRE  9.  If auto-callout was enabled in a pattern with a conditional group whose
1284      could crash during matching.      condition was an assertion, PCRE could crash during matching, both with
1285        pcre_exec() and pcre_dfa_exec().
1286  10. The PCRE_DOLLAR_ENDONLY option was not working when pcre_dfa_exec() was  
1287      used for matching.  10. The PCRE_DOLLAR_ENDONLY option was not working when pcre_dfa_exec() was
1288        used for matching.
1289  11. Unicode property support in character classes was not working for  
1290    11. Unicode property support in character classes was not working for
1291      characters (bytes) greater than 127 when not in UTF-8 mode.      characters (bytes) greater than 127 when not in UTF-8 mode.
1293  12. Added the -M command line option to pcretest.  12. Added the -M command line option to pcretest.
1295  14. Added the non-standard REG_NOTEMPTY option to the POSIX interface.  14. Added the non-standard REG_NOTEMPTY option to the POSIX interface.
1297    15. Added the PCRE_NO_START_OPTIMIZE match-time option.
1299    16. Added comments and documentation about mis-use of no_arg in the C++
1300        wrapper.
1302    17. Implemented support for UTF-8 encoding in EBCDIC environments, a patch
1303        from Martin Jerabek that uses macro names for all relevant character and
1304        string constants.
1306    18. Added to pcre_internal.h two configuration checks: (a) If both EBCDIC and
1307        SUPPORT_UTF8 are set, give an error; (b) If SUPPORT_UCP is set without
1308        SUPPORT_UTF8, define SUPPORT_UTF8. The "configure" script handles both of
1309        these, but not everybody uses configure.
1311    19. A conditional group that had only one branch was not being correctly
1312        recognized as an item that could match an empty string. This meant that an
1313        enclosing group might also not be so recognized, causing infinite looping
1314        (and probably a segfault) for patterns such as ^"((?(?=[a])[^"])|b)*"$
1315        with the subject "ab", where knowledge that the repeated group can match
1316        nothing is needed in order to break the loop.
1318    20. If a pattern that was compiled with callouts was matched using pcre_dfa_
1319        exec(), but without supplying a callout function, matching went wrong.
1321    21. If PCRE_ERROR_MATCHLIMIT occurred during a recursion, there was a memory
1322        leak if the size of the offset vector was greater than 30. When the vector
1323        is smaller, the saved offsets during recursion go onto a local stack
1324        vector, but for larger vectors malloc() is used. It was failing to free
1325        when the recursion yielded PCRE_ERROR_MATCH_LIMIT (or any other "abnormal"
1326        error, in fact).
1328    22. There was a missing #ifdef SUPPORT_UTF8 round one of the variables in the
1329        heapframe that is used only when UTF-8 support is enabled. This caused no
1330        problem, but was untidy.
1332    23. Steven Van Ingelgem's patch to CMakeLists.txt to change the name
1333        CMAKE_BINARY_DIR to PROJECT_BINARY_DIR so that it works when PCRE is
1334        included within another project.
1336    24. Steven Van Ingelgem's patches to add more options to the CMake support,
1337        slightly modified by me:
1339          (a) PCRE_BUILD_TESTS can be set OFF not to build the tests, including
1340              not building pcregrep.
1342          (b) PCRE_BUILD_PCREGREP can be see OFF not to build pcregrep, but only
1343              if PCRE_BUILD_TESTS is also set OFF, because the tests use pcregrep.
1345    25. Forward references, both numeric and by name, in patterns that made use of
1346        duplicate group numbers, could behave incorrectly or give incorrect errors,
1347        because when scanning forward to find the reference group, PCRE was not
1348        taking into account the duplicate group numbers. A pattern such as
1349        ^X(?3)(a)(?|(b)|(q))(Y) is an example.
1351    26. Changed a few more instances of "const unsigned char *" to USPTR, making
1352        the feature of a custom pointer more persuasive (as requested by a user).
1354    27. Wrapped the definitions of fileno and isatty for Windows, which appear in
1355        pcretest.c, inside #ifndefs, because it seems they are sometimes already
1356        pre-defined.
1358    28. Added support for (*UTF8) at the start of a pattern.
1360    29. Arrange for flags added by the "release type" setting in CMake to be shown
1361        in the configuration summary.
1364  Version 7.8 05-Sep-08  Version 7.8 05-Sep-08
1365  ---------------------  ---------------------

Removed from v.388  
changed lines
  Added in v.958

  ViewVC Help
Powered by ViewVC 1.1.5