/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 751 by ph10, Fri Nov 18 11:13:30 2011 UTC revision 1502 by ph10, Mon Sep 15 13:56:18 2014 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
3    
4  Version 8.21  Version 8.36 15-September-2014
5  ------------  ------------------------------
6    
7    1.  Got rid of some compiler warnings in the C++ modules that were shown up by
8        -Wmissing-field-initializers and -Wunused-parameter.
9    
10    2.  The tests for quantifiers being too big (greater than 65535) were being
11        applied after reading the number, and stupidly assuming that integer
12        overflow would give a negative number. The tests are now applied as the
13        numbers are read.
14    
15    3.  Tidy code in pcre_exec.c where two branches that used to be different are
16        now the same.
17    
18    4.  The JIT compiler did not generate match limit checks for certain
19        bracketed expressions with quantifiers. This may lead to exponential
20        backtracking, instead of returning with PCRE_ERROR_MATCHLIMIT. This
21        issue should be resolved now.
22    
23    5.  Fixed an issue, which occures when nested alternatives are optimized
24        with table jumps.
25    
26    6.  Inserted two casts and changed some ints to size_t in the light of some
27        reported 64-bit compiler warnings (Bugzilla 1477).
28    
29    7.  Fixed a bug concerned with zero-minimum possessive groups that could match
30        an empty string, which sometimes were behaving incorrectly in the
31        interpreter (though correctly in the JIT matcher). This pcretest input is
32        an example:
33    
34          '\A(?:[^"]++|"(?:[^"]*+|"")*+")++'
35          NON QUOTED "QUOT""ED" AFTER "NOT MATCHED
36    
37        the interpreter was reporting a match of 'NON QUOTED ' only, whereas the
38        JIT matcher and Perl both matched 'NON QUOTED "QUOT""ED" AFTER '. The test
39        for an empty string was breaking the inner loop and carrying on at a lower
40        level, when possessive repeated groups should always return to a higher
41        level as they have no backtrack points in them. The empty string test now
42        occurs at the outer level.
43    
44    8.  Fixed a bug that was incorrectly auto-possessifying \w+ in the pattern
45        ^\w+(?>\s*)(?<=\w) which caused it not to match "test test".
46    
47    9.  Give a compile-time error for \o{} (as Perl does) and for \x{} (which Perl
48        doesn't).
49    
50    10. Change 8.34/15 introduced a bug that caused the amount of memory needed
51        to hold a pattern to be incorrectly computed (too small) when there were
52        named back references to duplicated names. This could cause "internal
53        error: code overflow" or "double free or corruption" or other memory
54        handling errors.
55    
56    11. When named subpatterns had the same prefixes, back references could be
57        confused. For example, in this pattern:
58    
59          /(?P<Name>a)?(?P<Name2>b)?(?(<Name>)c|d)*l/
60    
61        the reference to 'Name' was incorrectly treated as a reference to a
62        duplicate name.
63    
64    12. A pattern such as /^s?c/mi8 where the optional character has more than
65        one "other case" was incorrectly compiled such that it would only try to
66        match starting at "c".
67    
68    13. When a pattern starting with \s was studied, VT was not included in the
69        list of possible starting characters; this should have been part of the
70        8.34/18 patch.
71    
72    14. If a character class started [\Qx]... where x is any character, the class
73        was incorrectly terminated at the ].
74    
75    15. If a pattern that started with a caseless match for a character with more
76        than one "other case" was studied, PCRE did not set up the starting code
77        unit bit map for the list of possible characters. Now it does. This is an
78        optimization improvement, not a bug fix.
79    
80    16. The Unicode data tables have been updated to Unicode 7.0.0.
81    
82    17. Fixed a number of memory leaks in pcregrep.
83    
84    18. Avoid a compiler warning (from some compilers) for a function call with
85        a cast that removes "const" from an lvalue by using an intermediate
86        variable (to which the compiler does not object).
87    
88    19. Incorrect code was compiled if a group that contained an internal recursive
89        back reference was optional (had quantifier with a minimum of zero). This
90        example compiled incorrect code: /(((a\2)|(a*)\g<-1>))*/ and other examples
91        caused segmentation faults because of stack overflows at compile time.
92    
93    20. A pattern such as /((?(R)a|(?1)))+/, which contains a recursion within a
94        group that is quantified with an indefinite repeat, caused a compile-time
95        loop which used up all the system stack and provoked a segmentation fault.
96        This was not the same bug as 19 above.
97    
98    21. Add PCRECPP_EXP_DECL declaration to operator<< in pcre_stringpiece.h.
99        Patch by Mike Frysinger.
100    
101    
102    Version 8.35 04-April-2014
103    --------------------------
104    
105    1.  A new flag is set, when property checks are present in an XCLASS.
106        When this flag is not set, PCRE can perform certain optimizations
107        such as studying these XCLASS-es.
108    
109    2.  The auto-possessification of character sets were improved: a normal
110        and an extended character set can be compared now. Furthermore
111        the JIT compiler optimizes more character set checks.
112    
113    3.  Got rid of some compiler warnings for potentially uninitialized variables
114        that show up only when compiled with -O2.
115    
116    4.  A pattern such as (?=ab\K) that uses \K in an assertion can set the start
117        of a match later then the end of the match. The pcretest program was not
118        handling the case sensibly - it was outputting from the start to the next
119        binary zero. It now reports this situation in a message, and outputs the
120        text from the end to the start.
121    
122    5.  Fast forward search is improved in JIT. Instead of the first three
123        characters, any three characters with fixed position can be searched.
124        Search order: first, last, middle.
125    
126    6.  Improve character range checks in JIT. Characters are read by an inprecise
127        function now, which returns with an unknown value if the character code is
128        above a certain threshold (e.g: 256). The only limitation is that the value
129        must be bigger than the threshold as well. This function is useful when
130        the characters above the threshold are handled in the same way.
131    
132    7.  The macros whose names start with RAWUCHAR are placeholders for a future
133        mode in which only the bottom 21 bits of 32-bit data items are used. To
134        make this more memorable for those maintaining the code, the names have
135        been changed to start with UCHAR21, and an extensive comment has been added
136        to their definition.
137    
138    8.  Add missing (new) files sljitNativeTILEGX.c and sljitNativeTILEGX-encoder.c
139        to the export list in Makefile.am (they were accidentally omitted from the
140        8.34 tarball).
141    
142    9.  The informational output from pcretest used the phrase "starting byte set"
143        which is inappropriate for the 16-bit and 32-bit libraries. As the output
144        for "first char" and "need char" really means "non-UTF-char", I've changed
145        "byte" to "char", and slightly reworded the output. The documentation about
146        these values has also been (I hope) clarified.
147    
148    10. Another JIT related optimization: use table jumps for selecting the correct
149        backtracking path, when more than four alternatives are present inside a
150        bracket.
151    
152    11. Empty match is not possible, when the minimum length is greater than zero,
153        and there is no \K in the pattern. JIT should avoid empty match checks in
154        such cases.
155    
156    12. In a caseless character class with UCP support, when a character with more
157        than one alternative case was not the first character of a range, not all
158        the alternative cases were added to the class. For example, s and \x{17f}
159        are both alternative cases for S: the class [RST] was handled correctly,
160        but [R-T] was not.
161    
162    13. The configure.ac file always checked for pthread support when JIT was
163        enabled. This is not used in Windows, so I have put this test inside a
164        check for the presence of windows.h (which was already tested for).
165    
166    14. Improve pattern prefix search by a simplified Boyer-Moore algorithm in JIT.
167        The algorithm provides a way to skip certain starting offsets, and usually
168        faster than linear prefix searches.
169    
170    15. Change 13 for 8.20 updated RunTest to check for the 'fr' locale as well
171        as for 'fr_FR' and 'french'. For some reason, however, it then used the
172        Windows-specific input and output files, which have 'french' screwed in.
173        So this could never have worked. One of the problems with locales is that
174        they aren't always the same. I have now updated RunTest so that it checks
175        the output of the locale test (test 3) against three different output
176        files, and it allows the test to pass if any one of them matches. With luck
177        this should make the test pass on some versions of Solaris where it was
178        failing. Because of the uncertainty, the script did not used to stop if
179        test 3 failed; it now does. If further versions of a French locale ever
180        come to light, they can now easily be added.
181    
182    16. If --with-pcregrep-bufsize was given a non-integer value such as "50K",
183        there was a message during ./configure, but it did not stop. This now
184        provokes an error. The invalid example in README has been corrected.
185        If a value less than the minimum is given, the minimum value has always
186        been used, but now a warning is given.
187    
188    17. If --enable-bsr-anycrlf was set, the special 16/32-bit test failed. This
189        was a bug in the test system, which is now fixed. Also, the list of various
190        configurations that are tested for each release did not have one with both
191        16/32 bits and --enable-bar-anycrlf. It now does.
192    
193    18. pcretest was missing "-C bsr" for displaying the \R default setting.
194    
195    19. Little endian PowerPC systems are supported now by the JIT compiler.
196    
197    20. The fast forward newline mechanism could enter to an infinite loop on
198        certain invalid UTF-8 input. Although we don't support these cases
199        this issue can be fixed by a performance optimization.
200    
201    21. Change 33 of 8.34 is not sufficient to ensure stack safety because it does
202        not take account if existing stack usage. There is now a new global
203        variable called pcre_stack_guard that can be set to point to an external
204        function to check stack availability. It is called at the start of
205        processing every parenthesized group.
206    
207    22. A typo in the code meant that in ungreedy mode the max/min qualifier
208        behaved like a min-possessive qualifier, and, for example, /a{1,3}b/U did
209        not match "ab".
210    
211    23. When UTF was disabled, the JIT program reported some incorrect compile
212        errors. These messages are silenced now.
213    
214    24. Experimental support for ARM-64 and MIPS-64 has been added to the JIT
215        compiler.
216    
217    25. Change all the temporary files used in RunGrepTest to be different to those
218        used by RunTest so that the tests can be run simultaneously, for example by
219        "make -j check".
220    
221    
222    Version 8.34 15-December-2013
223    -----------------------------
224    
225    1.  Add pcre[16|32]_jit_free_unused_memory to forcibly free unused JIT
226        executable memory. Patch inspired by Carsten Klein.
227    
228    2.  ./configure --enable-coverage defined SUPPORT_GCOV in config.h, although
229        this macro is never tested and has no effect, because the work to support
230        coverage involves only compiling and linking options and special targets in
231        the Makefile. The comment in config.h implied that defining the macro would
232        enable coverage support, which is totally false. There was also support for
233        setting this macro in the CMake files (my fault, I just copied it from
234        configure). SUPPORT_GCOV has now been removed.
235    
236    3.  Make a small performance improvement in strlen16() and strlen32() in
237        pcretest.
238    
239    4.  Change 36 for 8.33 left some unreachable statements in pcre_exec.c,
240        detected by the Solaris compiler (gcc doesn't seem to be able to diagnose
241        these cases). There was also one in pcretest.c.
242    
243    5.  Cleaned up a "may be uninitialized" compiler warning in pcre_exec.c.
244    
245    6.  In UTF mode, the code for checking whether a group could match an empty
246        string (which is used for indefinitely repeated groups to allow for
247        breaking an infinite loop) was broken when the group contained a repeated
248        negated single-character class with a character that occupied more than one
249        data item and had a minimum repetition of zero (for example, [^\x{100}]* in
250        UTF-8 mode). The effect was undefined: the group might or might not be
251        deemed as matching an empty string, or the program might have crashed.
252    
253    7.  The code for checking whether a group could match an empty string was not
254        recognizing that \h, \H, \v, \V, and \R must match a character.
255    
256    8.  Implemented PCRE_INFO_MATCH_EMPTY, which yields 1 if the pattern can match
257        an empty string. If it can, pcretest shows this in its information output.
258    
259    9.  Fixed two related bugs that applied to Unicode extended grapheme clusters
260        that were repeated with a maximizing qualifier (e.g. \X* or \X{2,5}) when
261        matched by pcre_exec() without using JIT:
262    
263        (a) If the rest of the pattern did not match after a maximal run of
264            grapheme clusters, the code for backing up to try with fewer of them
265            did not always back up over a full grapheme when characters that do not
266            have the modifier quality were involved, e.g. Hangul syllables.
267    
268        (b) If the match point in a subject started with modifier character, and
269            there was no match, the code could incorrectly back up beyond the match
270            point, and potentially beyond the first character in the subject,
271            leading to a segfault or an incorrect match result.
272    
273    10. A conditional group with an assertion condition could lead to PCRE
274        recording an incorrect first data item for a match if no other first data
275        item was recorded. For example, the pattern (?(?=ab)ab) recorded "a" as a
276        first data item, and therefore matched "ca" after "c" instead of at the
277        start.
278    
279    11. Change 40 for 8.33 (allowing pcregrep to find empty strings) showed up a
280        bug that caused the command "echo a | ./pcregrep -M '|a'" to loop.
281    
282    12. The source of pcregrep now includes z/OS-specific code so that it can be
283        compiled for z/OS as part of the special z/OS distribution.
284    
285    13. Added the -T and -TM options to pcretest.
286    
287    14. The code in pcre_compile.c for creating the table of named capturing groups
288        has been refactored. Instead of creating the table dynamically during the
289        actual compiling pass, the information is remembered during the pre-compile
290        pass (on the stack unless there are more than 20 named groups, in which
291        case malloc() is used) and the whole table is created before the actual
292        compile happens. This has simplified the code (it is now nearly 150 lines
293        shorter) and prepared the way for better handling of references to groups
294        with duplicate names.
295    
296    15. A back reference to a named subpattern when there is more than one of the
297        same name now checks them in the order in which they appear in the pattern.
298        The first one that is set is used for the reference. Previously only the
299        first one was inspected. This change makes PCRE more compatible with Perl.
300    
301    16. Unicode character properties were updated from Unicode 6.3.0.
302    
303    17. The compile-time code for auto-possessification has been refactored, based
304        on a patch by Zoltan Herczeg. It now happens after instead of during
305        compilation. The code is cleaner, and more cases are handled. The option
306        PCRE_NO_AUTO_POSSESS is added for testing purposes, and the -O and /O
307        options in pcretest are provided to set it. It can also be set by
308        (*NO_AUTO_POSSESS) at the start of a pattern.
309    
310    18. The character VT has been added to the default ("C" locale) set of
311        characters that match \s and are generally treated as white space,
312        following this same change in Perl 5.18. There is now no difference between
313        "Perl space" and "POSIX space". Whether VT is treated as white space in
314        other locales depends on the locale.
315    
316    19. The code for checking named groups as conditions, either for being set or
317        for being recursed, has been refactored (this is related to 14 and 15
318        above). Processing unduplicated named groups should now be as fast at
319        numerical groups, and processing duplicated groups should be faster than
320        before.
321    
322    20. Two patches to the CMake build system, by Alexander Barkov:
323    
324          (1) Replace the "source" command by "." in CMakeLists.txt because
325              "source" is a bash-ism.
326    
327          (2) Add missing HAVE_STDINT_H and HAVE_INTTYPES_H to config-cmake.h.in;
328              without these the CMake build does not work on Solaris.
329    
330    21. Perl has changed its handling of \8 and \9. If there is no previously
331        encountered capturing group of those numbers, they are treated as the
332        literal characters 8 and 9 instead of a binary zero followed by the
333        literals. PCRE now does the same.
334    
335    22. Following Perl, added \o{} to specify codepoints in octal, making it
336        possible to specify values greater than 0777 and also making them
337        unambiguous.
338    
339    23. Perl now gives an error for missing closing braces after \x{... instead of
340        treating the string as literal. PCRE now does the same.
341    
342    24. RunTest used to grumble if an inappropriate test was selected explicitly,
343        but just skip it when running all tests. This make it awkward to run ranges
344        of tests when one of them was inappropriate. Now it just skips any
345        inappropriate tests, as it always did when running all tests.
346    
347    25. If PCRE_AUTO_CALLOUT and PCRE_UCP were set for a pattern that contained
348        character types such as \d or \w, too many callouts were inserted, and the
349        data that they returned was rubbish.
350    
351    26. In UCP mode, \s was not matching two of the characters that Perl matches,
352        namely NEL (U+0085) and MONGOLIAN VOWEL SEPARATOR (U+180E), though they
353        were matched by \h. The code has now been refactored so that the lists of
354        the horizontal and vertical whitespace characters used for \h and \v (which
355        are defined only in one place) are now also used for \s.
356    
357    27. Add JIT support for the 64 bit TileGX architecture.
358        Patch by Jiong Wang (Tilera Corporation).
359    
360    28. Possessive quantifiers for classes (both explicit and automatically
361        generated) now use special opcodes instead of wrapping in ONCE brackets.
362    
363    29. Whereas an item such as A{4}+ ignored the possessivenes of the quantifier
364        (because it's meaningless), this was not happening when PCRE_CASELESS was
365        set. Not wrong, but inefficient.
366    
367    30. Updated perltest.pl to add /u (force Unicode mode) when /W (use Unicode
368        properties for \w, \d, etc) is present in a test regex. Otherwise if the
369        test contains no characters greater than 255, Perl doesn't realise it
370        should be using Unicode semantics.
371    
372    31. Upgraded the handling of the POSIX classes [:graph:], [:print:], and
373        [:punct:] when PCRE_UCP is set so as to include the same characters as Perl
374        does in Unicode mode.
375    
376    32. Added the "forbid" facility to pcretest so that putting tests into the
377        wrong test files can sometimes be quickly detected.
378    
379    33. There is now a limit (default 250) on the depth of nesting of parentheses.
380        This limit is imposed to control the amount of system stack used at compile
381        time. It can be changed at build time by --with-parens-nest-limit=xxx or
382        the equivalent in CMake.
383    
384    34. Character classes such as [A-\d] or [a-[:digit:]] now cause compile-time
385        errors. Perl warns for these when in warning mode, but PCRE has no facility
386        for giving warnings.
387    
388    35. Change 34 for 8.13 allowed quantifiers on assertions, because Perl does.
389        However, this was not working for (?!) because it is optimized to (*FAIL),
390        for which PCRE does not allow quantifiers. The optimization is now disabled
391        when a quantifier follows (?!). I can't see any use for this, but it makes
392        things uniform.
393    
394    36. Perl no longer allows group names to start with digits, so I have made this
395        change also in PCRE. It simplifies the code a bit.
396    
397    37. In extended mode, Perl ignores spaces before a + that indicates a
398        possessive quantifier. PCRE allowed a space before the quantifier, but not
399        before the possessive +. It now does.
400    
401    38. The use of \K (reset reported match start) within a repeated possessive
402        group such as (a\Kb)*+ was not working.
403    
404    40. Document that the same character tables must be used at compile time and
405        run time, and that the facility to pass tables to pcre_exec() and
406        pcre_dfa_exec() is for use only with saved/restored patterns.
407    
408    41. Applied Jeff Trawick's patch CMakeLists.txt, which "provides two new
409        features for Builds with MSVC:
410    
411        1. Support pcre.rc and/or pcreposix.rc (as is already done for MinGW
412           builds). The .rc files can be used to set FileDescription and many other
413           attributes.
414    
415        2. Add an option (-DINSTALL_MSVC_PDB) to enable installation of .pdb files.
416           This allows higher-level build scripts which want .pdb files to avoid
417           hard-coding the exact files needed."
418    
419    42. Added support for [[:<:]] and [[:>:]] as used in the BSD POSIX library to
420        mean "start of word" and "end of word", respectively, as a transition aid.
421    
422    43. A minimizing repeat of a class containing codepoints greater than 255 in
423        non-UTF 16-bit or 32-bit modes caused an internal error when PCRE was
424        compiled to use the heap for recursion.
425    
426    44. Got rid of some compiler warnings for unused variables when UTF but not UCP
427        is configured.
428    
429    
430    Version 8.33 28-May-2013
431    ------------------------
432    
433    1.  Added 'U' to some constants that are compared to unsigned integers, to
434        avoid compiler signed/unsigned warnings. Added (int) casts to unsigned
435        variables that are added to signed variables, to ensure the result is
436        signed and can be negated.
437    
438    2.  Applied patch by Daniel Richard G for quashing MSVC warnings to the
439        CMake config files.
440    
441    3.  Revise the creation of config.h.generic so that all boolean macros are
442        #undefined, whereas non-boolean macros are #ifndef/#endif-ed. This makes
443        overriding via -D on the command line possible.
444    
445    4.  Changing the definition of the variable "op" in pcre_exec.c from pcre_uchar
446        to unsigned int is reported to make a quite noticeable speed difference in
447        a specific Windows environment. Testing on Linux did also appear to show
448        some benefit (and it is clearly not harmful). Also fixed the definition of
449        Xop which should be unsigned.
450    
451    5.  Related to (4), changing the definition of the intermediate variable cc
452        in repeated character loops from pcre_uchar to pcre_uint32 also gave speed
453        improvements.
454    
455    6.  Fix forward search in JIT when link size is 3 or greater. Also removed some
456        unnecessary spaces.
457    
458    7.  Adjust autogen.sh and configure.ac to lose warnings given by automake 1.12
459        and later.
460    
461    8.  Fix two buffer over read issues in 16 and 32 bit modes. Affects JIT only.
462    
463    9.  Optimizing fast_forward_start_bits in JIT.
464    
465    10. Adding support for callouts in JIT, and fixing some issues revealed
466        during this work. Namely:
467    
468        (a) Unoptimized capturing brackets incorrectly reset on backtrack.
469    
470        (b) Minimum length was not checked before the matching is started.
471    
472    11. The value of capture_last that is passed to callouts was incorrect in some
473        cases when there was a capture on one path that was subsequently abandoned
474        after a backtrack. Also, the capture_last value is now reset after a
475        recursion, since all captures are also reset in this case.
476    
477    12. The interpreter no longer returns the "too many substrings" error in the
478        case when an overflowing capture is in a branch that is subsequently
479        abandoned after a backtrack.
480    
481    13. In the pathological case when an offset vector of size 2 is used, pcretest
482        now prints out the matched string after a yield of 0 or 1.
483    
484    14. Inlining subpatterns in recursions, when certain conditions are fulfilled.
485        Only supported by the JIT compiler at the moment.
486    
487    15. JIT compiler now supports 32 bit Macs thanks to Lawrence Velazquez.
488    
489    16. Partial matches now set offsets[2] to the "bumpalong" value, that is, the
490        offset of the starting point of the matching process, provided the offsets
491        vector is large enough.
492    
493    17. The \A escape now records a lookbehind value of 1, though its execution
494        does not actually inspect the previous character. This is to ensure that,
495        in partial multi-segment matching, at least one character from the old
496        segment is retained when a new segment is processed. Otherwise, if there
497        are no lookbehinds in the pattern, \A might match incorrectly at the start
498        of a new segment.
499    
500    18. Added some #ifdef __VMS code into pcretest.c to help VMS implementations.
501    
502    19. Redefined some pcre_uchar variables in pcre_exec.c as pcre_uint32; this
503        gives some modest performance improvement in 8-bit mode.
504    
505    20. Added the PCRE-specific property \p{Xuc} for matching characters that can
506        be expressed in certain programming languages using Universal Character
507        Names.
508    
509    21. Unicode validation has been updated in the light of Unicode Corrigendum #9,
510        which points out that "non characters" are not "characters that may not
511        appear in Unicode strings" but rather "characters that are reserved for
512        internal use and have only local meaning".
513    
514    22. When a pattern was compiled with automatic callouts (PCRE_AUTO_CALLOUT) and
515        there was a conditional group that depended on an assertion, if the
516        assertion was false, the callout that immediately followed the alternation
517        in the condition was skipped when pcre_exec() was used for matching.
518    
519    23. Allow an explicit callout to be inserted before an assertion that is the
520        condition for a conditional group, for compatibility with automatic
521        callouts, which always insert a callout at this point.
522    
523    24. In 8.31, (*COMMIT) was confined to within a recursive subpattern. Perl also
524        confines (*SKIP) and (*PRUNE) in the same way, and this has now been done.
525    
526    25. (*PRUNE) is now supported by the JIT compiler.
527    
528    26. Fix infinite loop when /(?<=(*SKIP)ac)a/ is matched against aa.
529    
530    27. Fix the case where there are two or more SKIPs with arguments that may be
531        ignored.
532    
533    28. (*SKIP) is now supported by the JIT compiler.
534    
535    29. (*THEN) is now supported by the JIT compiler.
536    
537    30. Update RunTest with additional test selector options.
538    
539    31. The way PCRE handles backtracking verbs has been changed in two ways.
540    
541        (1) Previously, in something like (*COMMIT)(*SKIP), COMMIT would override
542        SKIP. Now, PCRE acts on whichever backtracking verb is reached first by
543        backtracking. In some cases this makes it more Perl-compatible, but Perl's
544        rather obscure rules do not always do the same thing.
545    
546        (2) Previously, backtracking verbs were confined within assertions. This is
547        no longer the case for positive assertions, except for (*ACCEPT). Again,
548        this sometimes improves Perl compatibility, and sometimes does not.
549    
550    32. A number of tests that were in test 2 because Perl did things differently
551        have been moved to test 1, because either Perl or PCRE has changed, and
552        these tests are now compatible.
553    
554    32. Backtracking control verbs are now handled in the same way in JIT and
555        interpreter.
556    
557    33. An opening parenthesis in a MARK/PRUNE/SKIP/THEN name in a pattern that
558        contained a forward subroutine reference caused a compile error.
559    
560    34. Auto-detect and optimize limited repetitions in JIT.
561    
562    35. Implement PCRE_NEVER_UTF to lock out the use of UTF, in particular,
563        blocking (*UTF) etc.
564    
565    36. In the interpreter, maximizing pattern repetitions for characters and
566        character types now use tail recursion, which reduces stack usage.
567    
568    37. The value of the max lookbehind was not correctly preserved if a compiled
569        and saved regex was reloaded on a host of different endianness.
570    
571    38. Implemented (*LIMIT_MATCH) and (*LIMIT_RECURSION). As part of the extension
572        of the compiled pattern block, expand the flags field from 16 to 32 bits
573        because it was almost full.
574    
575    39. Try madvise first before posix_madvise.
576    
577    40. Change 7 for PCRE 7.9 made it impossible for pcregrep to find empty lines
578        with a pattern such as ^$. It has taken 4 years for anybody to notice! The
579        original change locked out all matches of empty strings. This has been
580        changed so that one match of an empty string per line is recognized.
581        Subsequent searches on the same line (for colouring or for --only-matching,
582        for example) do not recognize empty strings.
583    
584    41. Applied a user patch to fix a number of spelling mistakes in comments.
585    
586    42. Data lines longer than 65536 caused pcretest to crash.
587    
588    43. Clarified the data type for length and startoffset arguments for pcre_exec
589        and pcre_dfa_exec in the function-specific man pages, where they were
590        explicitly stated to be in bytes, never having been updated. I also added
591        some clarification to the pcreapi man page.
592    
593    44. A call to pcre_dfa_exec() with an output vector size less than 2 caused
594        a segmentation fault.
595    
596    
597    Version 8.32 30-November-2012
598    -----------------------------
599    
600    1.  Improved JIT compiler optimizations for first character search and single
601        character iterators.
602    
603    2.  Supporting IBM XL C compilers for PPC architectures in the JIT compiler.
604        Patch by Daniel Richard G.
605    
606    3.  Single character iterator optimizations in the JIT compiler.
607    
608    4.  Improved JIT compiler optimizations for character ranges.
609    
610    5.  Rename the "leave" variable names to "quit" to improve WinCE compatibility.
611        Reported by Giuseppe D'Angelo.
612    
613    6.  The PCRE_STARTLINE bit, indicating that a match can occur only at the start
614        of a line, was being set incorrectly in cases where .* appeared inside
615        atomic brackets at the start of a pattern, or where there was a subsequent
616        *PRUNE or *SKIP.
617    
618    7.  Improved instruction cache flush for POWER/PowerPC.
619        Patch by Daniel Richard G.
620    
621    8.  Fixed a number of issues in pcregrep, making it more compatible with GNU
622        grep:
623    
624        (a) There is now no limit to the number of patterns to be matched.
625    
626        (b) An error is given if a pattern is too long.
627    
628        (c) Multiple uses of --exclude, --exclude-dir, --include, and --include-dir
629            are now supported.
630    
631        (d) --exclude-from and --include-from (multiple use) have been added.
632    
633        (e) Exclusions and inclusions now apply to all files and directories, not
634            just to those obtained from scanning a directory recursively.
635    
636        (f) Multiple uses of -f and --file-list are now supported.
637    
638        (g) In a Windows environment, the default for -d has been changed from
639            "read" (the GNU grep default) to "skip", because otherwise the presence
640            of a directory in the file list provokes an error.
641    
642        (h) The documentation has been revised and clarified in places.
643    
644    9.  Improve the matching speed of capturing brackets.
645    
646    10. Changed the meaning of \X so that it now matches a Unicode extended
647        grapheme cluster.
648    
649    11. Patch by Daniel Richard G to the autoconf files to add a macro for sorting
650        out POSIX threads when JIT support is configured.
651    
652    12. Added support for PCRE_STUDY_EXTRA_NEEDED.
653    
654    13. In the POSIX wrapper regcomp() function, setting re_nsub field in the preg
655        structure could go wrong in environments where size_t is not the same size
656        as int.
657    
658    14. Applied user-supplied patch to pcrecpp.cc to allow PCRE_NO_UTF8_CHECK to be
659        set.
660    
661    15. The EBCDIC support had decayed; later updates to the code had included
662        explicit references to (e.g.) \x0a instead of CHAR_LF. There has been a
663        general tidy up of EBCDIC-related issues, and the documentation was also
664        not quite right. There is now a test that can be run on ASCII systems to
665        check some of the EBCDIC-related things (but is it not a full test).
666    
667    16. The new PCRE_STUDY_EXTRA_NEEDED option is now used by pcregrep, resulting
668        in a small tidy to the code.
669    
670    17. Fix JIT tests when UTF is disabled and both 8 and 16 bit mode are enabled.
671    
672    18. If the --only-matching (-o) option in pcregrep is specified multiple
673        times, each one causes appropriate output. For example, -o1 -o2 outputs the
674        substrings matched by the 1st and 2nd capturing parentheses. A separating
675        string can be specified by --om-separator (default empty).
676    
677    19. Improving the first n character searches.
678    
679    20. Turn case lists for horizontal and vertical white space into macros so that
680        they are defined only once.
681    
682    21. This set of changes together give more compatible Unicode case-folding
683        behaviour for characters that have more than one other case when UCP
684        support is available.
685    
686        (a) The Unicode property table now has offsets into a new table of sets of
687            three or more characters that are case-equivalent. The MultiStage2.py
688            script that generates these tables (the pcre_ucd.c file) now scans
689            CaseFolding.txt instead of UnicodeData.txt for character case
690            information.
691    
692        (b) The code for adding characters or ranges of characters to a character
693            class has been abstracted into a generalized function that also handles
694            case-independence. In UTF-mode with UCP support, this uses the new data
695            to handle characters with more than one other case.
696    
697        (c) A bug that is fixed as a result of (b) is that codepoints less than 256
698            whose other case is greater than 256 are now correctly matched
699            caselessly. Previously, the high codepoint matched the low one, but not
700            vice versa.
701    
702        (d) The processing of \h, \H, \v, and \ in character classes now makes use
703            of the new class addition function, using character lists defined as
704            macros alongside the case definitions of 20 above.
705    
706        (e) Caseless back references now work with characters that have more than
707            one other case.
708    
709        (f) General caseless matching of characters with more than one other case
710            is supported.
711    
712    22. Unicode character properties were updated from Unicode 6.2.0
713    
714    23. Improved CMake support under Windows. Patch by Daniel Richard G.
715    
716    24. Add support for 32-bit character strings, and UTF-32
717    
718    25. Major JIT compiler update (code refactoring and bugfixing).
719        Experimental Sparc 32 support is added.
720    
721    26. Applied a modified version of Daniel Richard G's patch to create
722        pcre.h.generic and config.h.generic by "make" instead of in the
723        PrepareRelease script.
724    
725    27. Added a definition for CHAR_NULL (helpful for the z/OS port), and use it in
726        pcre_compile.c when checking for a zero character.
727    
728    28. Introducing a native interface for JIT. Through this interface, the compiled
729        machine code can be directly executed. The purpose of this interface is to
730        provide fast pattern matching, so several sanity checks are not performed.
731        However, feature tests are still performed. The new interface provides
732        1.4x speedup compared to the old one.
733    
734    29. If pcre_exec() or pcre_dfa_exec() was called with a negative value for
735        the subject string length, the error given was PCRE_ERROR_BADOFFSET, which
736        was confusing. There is now a new error PCRE_ERROR_BADLENGTH for this case.
737    
738    30. In 8-bit UTF-8 mode, pcretest failed to give an error for data codepoints
739        greater than 0x7fffffff (which cannot be represented in UTF-8, even under
740        the "old" RFC 2279). Instead, it ended up passing a negative length to
741        pcre_exec().
742    
743    31. Add support for GCC's visibility feature to hide internal functions.
744    
745    32. Running "pcretest -C pcre8" or "pcretest -C pcre16" gave a spurious error
746        "unknown -C option" after outputting 0 or 1.
747    
748    33. There is now support for generating a code coverage report for the test
749        suite in environments where gcc is the compiler and lcov is installed. This
750        is mainly for the benefit of the developers.
751    
752    34. If PCRE is built with --enable-valgrind, certain memory regions are marked
753        unaddressable using valgrind annotations, allowing valgrind to detect
754        invalid memory accesses. This is mainly for the benefit of the developers.
755    
756    25. (*UTF) can now be used to start a pattern in any of the three libraries.
757    
758    26. Give configure error if --enable-cpp but no C++ compiler found.
759    
760    
761    Version 8.31 06-July-2012
762    -------------------------
763    
764    1.  Fixing a wrong JIT test case and some compiler warnings.
765    
766    2.  Removed a bashism from the RunTest script.
767    
768    3.  Add a cast to pcre_exec.c to fix the warning "unary minus operator applied
769        to unsigned type, result still unsigned" that was given by an MS compiler
770        on encountering the code "-sizeof(xxx)".
771    
772    4.  Partial matching support is added to the JIT compiler.
773    
774    5.  Fixed several bugs concerned with partial matching of items that consist
775        of more than one character:
776    
777        (a) /^(..)\1/ did not partially match "aba" because checking references was
778            done on an "all or nothing" basis. This also applied to repeated
779            references.
780    
781        (b) \R did not give a hard partial match if \r was found at the end of the
782            subject.
783    
784        (c) \X did not give a hard partial match after matching one or more
785            characters at the end of the subject.
786    
787        (d) When newline was set to CRLF, a pattern such as /a$/ did not recognize
788            a partial match for the string "\r".
789    
790        (e) When newline was set to CRLF, the metacharacter "." did not recognize
791            a partial match for a CR character at the end of the subject string.
792    
793    6.  If JIT is requested using /S++ or -s++ (instead of just /S+ or -s+) when
794        running pcretest, the text "(JIT)" added to the output whenever JIT is
795        actually used to run the match.
796    
797    7.  Individual JIT compile options can be set in pcretest by following -s+[+]
798        or /S+[+] with a digit between 1 and 7.
799    
800    8.  OP_NOT now supports any UTF character not just single-byte ones.
801    
802    9.  (*MARK) control verb is now supported by the JIT compiler.
803    
804    10. The command "./RunTest list" lists the available tests without actually
805        running any of them. (Because I keep forgetting what they all are.)
806    
807    11. Add PCRE_INFO_MAXLOOKBEHIND.
808    
809    12. Applied a (slightly modified) user-supplied patch that improves performance
810        when the heap is used for recursion (compiled with --disable-stack-for-
811        recursion). Instead of malloc and free for each heap frame each time a
812        logical recursion happens, frames are retained on a chain and re-used where
813        possible. This sometimes gives as much as 30% improvement.
814    
815    13. As documented, (*COMMIT) is now confined to within a recursive subpattern
816        call.
817    
818    14. As documented, (*COMMIT) is now confined to within a positive assertion.
819    
820    15. It is now possible to link pcretest with libedit as an alternative to
821        libreadline.
822    
823    16. (*COMMIT) control verb is now supported by the JIT compiler.
824    
825    17. The Unicode data tables have been updated to Unicode 6.1.0.
826    
827    18. Added --file-list option to pcregrep.
828    
829    19. Added binary file support to pcregrep, including the -a, --binary-files,
830        -I, and --text options.
831    
832    20. The madvise function is renamed for posix_madvise for QNX compatibility
833        reasons. Fixed by Giuseppe D'Angelo.
834    
835    21. Fixed a bug for backward assertions with REVERSE 0 in the JIT compiler.
836    
837    22. Changed the option for creating symbolic links for 16-bit man pages from
838        -s to -sf so that re-installing does not cause issues.
839    
840    23. Support PCRE_NO_START_OPTIMIZE in JIT as (*MARK) support requires it.
841    
842    24. Fixed a very old bug in pcretest that caused errors with restarted DFA
843        matches in certain environments (the workspace was not being correctly
844        retained). Also added to pcre_dfa_exec() a simple plausibility check on
845        some of the workspace data at the beginning of a restart.
846    
847    25. \s*\R was auto-possessifying the \s* when it should not, whereas \S*\R
848        was not doing so when it should - probably a typo introduced by SVN 528
849        (change 8.10/14).
850    
851    26. When PCRE_UCP was not set, \w+\x{c4} was incorrectly auto-possessifying the
852        \w+ when the character tables indicated that \x{c4} was a word character.
853        There were several related cases, all because the tests for doing a table
854        lookup were testing for characters less than 127 instead of 255.
855    
856    27. If a pattern contains capturing parentheses that are not used in a match,
857        their slots in the ovector are set to -1. For those that are higher than
858        any matched groups, this happens at the end of processing. In the case when
859        there were back references that the ovector was too small to contain
860        (causing temporary malloc'd memory to be used during matching), and the
861        highest capturing number was not used, memory off the end of the ovector
862        was incorrectly being set to -1. (It was using the size of the temporary
863        memory instead of the true size.)
864    
865    28. To catch bugs like 27 using valgrind, when pcretest is asked to specify an
866        ovector size, it uses memory at the end of the block that it has got.
867    
868    29. Check for an overlong MARK name and give an error at compile time. The
869        limit is 255 for the 8-bit library and 65535 for the 16-bit library.
870    
871    30. JIT compiler update.
872    
873    31. JIT is now supported on jailbroken iOS devices. Thanks for Ruiger
874        Rill for the patch.
875    
876    32. Put spaces around SLJIT_PRINT_D in the JIT compiler. Required by CXX11.
877    
878    33. Variable renamings in the PCRE-JIT compiler. No functionality change.
879    
880    34. Fixed typos in pcregrep: in two places there was SUPPORT_LIBZ2 instead of
881        SUPPORT_LIBBZ2. This caused a build problem when bzip2 but not gzip (zlib)
882        was enabled.
883    
884    35. Improve JIT code generation for greedy plus quantifier.
885    
886    36. When /((?:a?)*)*c/ or /((?>a?)*)*c/ was matched against "aac", it set group
887        1 to "aa" instead of to an empty string. The bug affected repeated groups
888        that could potentially match an empty string.
889    
890    37. Optimizing single character iterators in JIT.
891    
892    38. Wide characters specified with \uxxxx in JavaScript mode are now subject to
893        the same checks as \x{...} characters in non-JavaScript mode. Specifically,
894        codepoints that are too big for the mode are faulted, and in a UTF mode,
895        disallowed codepoints are also faulted.
896    
897    39. If PCRE was compiled with UTF support, in three places in the DFA
898        matcher there was code that should only have been obeyed in UTF mode, but
899        was being obeyed unconditionally. In 8-bit mode this could cause incorrect
900        processing when bytes with values greater than 127 were present. In 16-bit
901        mode the bug would be provoked by values in the range 0xfc00 to 0xdc00. In
902        both cases the values are those that cannot be the first data item in a UTF
903        character. The three items that might have provoked this were recursions,
904        possessively repeated groups, and atomic groups.
905    
906    40. Ensure that libpcre is explicitly listed in the link commands for pcretest
907        and pcregrep, because some OS require shared objects to be explicitly
908        passed to ld, causing the link step to fail if they are not.
909    
910    41. There were two incorrect #ifdefs in pcre_study.c, meaning that, in 16-bit
911        mode, patterns that started with \h* or \R* might be incorrectly matched.
912    
913    
914    Version 8.30 04-February-2012
915    -----------------------------
916    
917    1.  Renamed "isnumber" as "is_a_number" because in some Mac environments this
918        name is defined in ctype.h.
919    
920    2.  Fixed a bug in fixed-length calculation for lookbehinds that would show up
921        only in quite long subpatterns.
922    
923    3.  Removed the function pcre_info(), which has been obsolete and deprecated
924        since it was replaced by pcre_fullinfo() in February 2000.
925    
926    4.  For a non-anchored pattern, if (*SKIP) was given with a name that did not
927        match a (*MARK), and the match failed at the start of the subject, a
928        reference to memory before the start of the subject could occur. This bug
929        was introduced by fix 17 of release 8.21.
930    
931    5.  A reference to an unset group with zero minimum repetition was giving
932        totally wrong answers (in non-JavaScript-compatibility mode). For example,
933        /(another)?(\1?)test/ matched against "hello world test". This bug was
934        introduced in release 8.13.
935    
936    6.  Add support for 16-bit character strings (a large amount of work involving
937        many changes and refactorings).
938    
939    7.  RunGrepTest failed on msys because \r\n was replaced by whitespace when the
940        command "pattern=`printf 'xxx\r\njkl'`" was run. The pattern is now taken
941        from a file.
942    
943    8.  Ovector size of 2 is also supported by JIT based pcre_exec (the ovector size
944        rounding is not applied in this particular case).
945    
946    9.  The invalid Unicode surrogate codepoints U+D800 to U+DFFF are now rejected
947        if they appear, or are escaped, in patterns.
948    
949    10. Get rid of a number of -Wunused-but-set-variable warnings.
950    
951    11. The pattern /(?=(*:x))(q|)/ matches an empty string, and returns the mark
952        "x". The similar pattern /(?=(*:x))((*:y)q|)/ did not return a mark at all.
953        Oddly, Perl behaves the same way. PCRE has been fixed so that this pattern
954        also returns the mark "x". This bug applied to capturing parentheses,
955        non-capturing parentheses, and atomic parentheses. It also applied to some
956        assertions.
957    
958    12. Stephen Kelly's patch to CMakeLists.txt allows it to parse the version
959        information out of configure.ac instead of relying on pcre.h.generic, which
960        is not stored in the repository.
961    
962    13. Applied Dmitry V. Levin's patch for a more portable method for linking with
963        -lreadline.
964    
965    14. ZH added PCRE_CONFIG_JITTARGET; added its output to pcretest -C.
966    
967    15. Applied Graycode's patch to put the top-level frame on the stack rather
968        than the heap when not using the stack for recursion. This gives a
969        performance improvement in many cases when recursion is not deep.
970    
971    16. Experimental code added to "pcretest -C" to output the stack frame size.
972    
973    
974    Version 8.21 12-Dec-2011
975    ------------------------
976    
977  1.  Updating the JIT compiler.  1.  Updating the JIT compiler.
978    
# Line 13  Version 8.21 Line 983  Version 8.21
983      PCRE_EXTRA_TABLES is not suported by JIT, and should be checked before      PCRE_EXTRA_TABLES is not suported by JIT, and should be checked before
984      calling _pcre_jit_exec. Some extra comments are added.      calling _pcre_jit_exec. Some extra comments are added.
985    
986  4.  Mark settings inside atomic groups that do not contain any capturing  4.  (*MARK) settings inside atomic groups that do not contain any capturing
987      parentheses, for example, (?>a(*:m)), were not being passed out. This bug      parentheses, for example, (?>a(*:m)), were not being passed out. This bug
988      was introduced by change 18 for 8.20.      was introduced by change 18 for 8.20.
989    
# Line 22  Version 8.21 Line 992  Version 8.21
992    
993  6.  Lookbehinds such as (?<=a{2}b) that contained a fixed repetition were  6.  Lookbehinds such as (?<=a{2}b) that contained a fixed repetition were
994      erroneously being rejected as "not fixed length" if PCRE_CASELESS was set.      erroneously being rejected as "not fixed length" if PCRE_CASELESS was set.
995      This bug was probably introduced by change 9 of 8.13.      This bug was probably introduced by change 9 of 8.13.
996    
997  7.  While fixing 6 above, I noticed that a number of other items were being  7.  While fixing 6 above, I noticed that a number of other items were being
998      incorrectly rejected as "not fixed length". This arose partly because newer      incorrectly rejected as "not fixed length". This arose partly because newer
999      opcodes had not been added to the fixed-length checking code. I have (a)      opcodes had not been added to the fixed-length checking code. I have (a)
1000      corrected the bug and added tests for these items, and (b) arranged for an      corrected the bug and added tests for these items, and (b) arranged for an
1001      error to occur if an unknown opcode is encountered while checking for fixed      error to occur if an unknown opcode is encountered while checking for fixed
1002      length instead of just assuming "not fixed length". The items that were      length instead of just assuming "not fixed length". The items that were
1003      rejected were: (*ACCEPT), (*COMMIT), (*FAIL), (*MARK), (*PRUNE), (*SKIP),      rejected were: (*ACCEPT), (*COMMIT), (*FAIL), (*MARK), (*PRUNE), (*SKIP),
1004      (*THEN), \h, \H, \v, \V, and single character negative classes with fixed      (*THEN), \h, \H, \v, \V, and single character negative classes with fixed
1005      repetitions, e.g. [^a]{3}, with and without PCRE_CASELESS.      repetitions, e.g. [^a]{3}, with and without PCRE_CASELESS.
1006    
1007  8.  A possessively repeated conditional subpattern such as (?(?=c)c|d)++ was  8.  A possessively repeated conditional subpattern such as (?(?=c)c|d)++ was
1008      being incorrectly compiled and would have given unpredicatble results.      being incorrectly compiled and would have given unpredicatble results.
1009    
1010  9.  A possessively repeated subpattern with minimum repeat count greater than  9.  A possessively repeated subpattern with minimum repeat count greater than
1011      one behaved incorrectly. For example, (A){2,}+ behaved as if it was      one behaved incorrectly. For example, (A){2,}+ behaved as if it was
1012      (A)(A)++ which meant that, after a subsequent mismatch, backtracking into      (A)(A)++ which meant that, after a subsequent mismatch, backtracking into
1013      the first (A) could occur when it should not.      the first (A) could occur when it should not.
1014    
1015  10. Add a cast and remove a redundant test from the code.  10. Add a cast and remove a redundant test from the code.
1016    
1017    11. JIT should use pcre_malloc/pcre_free for allocation.
1018    
1019    12. Updated pcre-config so that it no longer shows -L/usr/lib, which seems
1020        best practice nowadays, and helps with cross-compiling. (If the exec_prefix
1021        is anything other than /usr, -L is still shown).
1022    
1023    13. In non-UTF-8 mode, \C is now supported in lookbehinds and DFA matching.
1024    
1025    14. Perl does not support \N without a following name in a [] class; PCRE now
1026        also gives an error.
1027    
1028    15. If a forward reference was repeated with an upper limit of around 2000,
1029        it caused the error "internal error: overran compiling workspace". The
1030        maximum number of forward references (including repeats) was limited by the
1031        internal workspace, and dependent on the LINK_SIZE. The code has been
1032        rewritten so that the workspace expands (via pcre_malloc) if necessary, and
1033        the default depends on LINK_SIZE. There is a new upper limit (for safety)
1034        of around 200,000 forward references. While doing this, I also speeded up
1035        the filling in of repeated forward references.
1036    
1037    16. A repeated forward reference in a pattern such as (a)(?2){2}(.) was
1038        incorrectly expecting the subject to contain another "a" after the start.
1039    
1040    17. When (*SKIP:name) is activated without a corresponding (*MARK:name) earlier
1041        in the match, the SKIP should be ignored. This was not happening; instead
1042        the SKIP was being treated as NOMATCH. For patterns such as
1043        /A(*MARK:A)A+(*SKIP:B)Z|AAC/ this meant that the AAC branch was never
1044        tested.
1045    
1046    18. The behaviour of (*MARK), (*PRUNE), and (*THEN) has been reworked and is
1047        now much more compatible with Perl, in particular in cases where the result
1048        is a non-match for a non-anchored pattern. For example, if
1049        /b(*:m)f|a(*:n)w/ is matched against "abc", the non-match returns the name
1050        "m", where previously it did not return a name. A side effect of this
1051        change is that for partial matches, the last encountered mark name is
1052        returned, as for non matches. A number of tests that were previously not
1053        Perl-compatible have been moved into the Perl-compatible test files. The
1054        refactoring has had the pleasing side effect of removing one argument from
1055        the match() function, thus reducing its stack requirements.
1056    
1057    19. If the /S+ option was used in pcretest to study a pattern using JIT,
1058        subsequent uses of /S (without +) incorrectly behaved like /S+.
1059    
1060    21. Retrieve executable code size support for the JIT compiler and fixing
1061        some warnings.
1062    
1063    22. A caseless match of a UTF-8 character whose other case uses fewer bytes did
1064        not work when the shorter character appeared right at the end of the
1065        subject string.
1066    
1067    23. Added some (int) casts to non-JIT modules to reduce warnings on 64-bit
1068        systems.
1069    
1070    24. Added PCRE_INFO_JITSIZE to pass on the value from (21) above, and also
1071        output it when the /M option is used in pcretest.
1072    
1073    25. The CheckMan script was not being included in the distribution. Also, added
1074        an explicit "perl" to run Perl scripts from the PrepareRelease script
1075        because this is reportedly needed in Windows.
1076    
1077    26. If study data was being save in a file and studying had not found a set of
1078        "starts with" bytes for the pattern, the data written to the file (though
1079        never used) was taken from uninitialized memory and so caused valgrind to
1080        complain.
1081    
1082    27. Updated RunTest.bat as provided by Sheri Pierce.
1083    
1084    28. Fixed a possible uninitialized memory bug in pcre_jit_compile.c.
1085    
1086    29. Computation of memory usage for the table of capturing group names was
1087        giving an unnecessarily large value.
1088    
1089    
1090  Version 8.20 21-Oct-2011  Version 8.20 21-Oct-2011
# Line 1059  Version 7.9 11-Apr-09 Line 2101  Version 7.9 11-Apr-09
2101  7.  A pattern that could match an empty string could cause pcregrep to loop; it  7.  A pattern that could match an empty string could cause pcregrep to loop; it
2102      doesn't make sense to accept an empty string match in pcregrep, so I have      doesn't make sense to accept an empty string match in pcregrep, so I have
2103      locked it out (using PCRE's PCRE_NOTEMPTY option). By experiment, this      locked it out (using PCRE's PCRE_NOTEMPTY option). By experiment, this
2104      seems to be how GNU grep behaves.      seems to be how GNU grep behaves. [But see later change 40 for release
2105        8.33.]
2106    
2107  8.  The pattern (?(?=.*b)b|^) was incorrectly compiled as "match must be at  8.  The pattern (?(?=.*b)b|^) was incorrectly compiled as "match must be at
2108      start or after a newline", because the conditional assertion was not being      start or after a newline", because the conditional assertion was not being
# Line 1302  Version 7.7 07-May-08 Line 2345  Version 7.7 07-May-08
2345      containing () gave an internal compiling error instead of "reference to      containing () gave an internal compiling error instead of "reference to
2346      non-existent subpattern". Fortunately, when the pattern did exist, the      non-existent subpattern". Fortunately, when the pattern did exist, the
2347      compiled code was correct. (When scanning forwards to check for the      compiled code was correct. (When scanning forwards to check for the
2348      existencd of the subpattern, it was treating the data ']' as terminating      existence of the subpattern, it was treating the data ']' as terminating
2349      the class, so got the count wrong. When actually compiling, the reference      the class, so got the count wrong. When actually compiling, the reference
2350      was subsequently set up correctly.)      was subsequently set up correctly.)
2351    

Legend:
Removed from v.751  
changed lines
  Added in v.1502

  ViewVC Help
Powered by ViewVC 1.1.5