/[pcre]/code/trunk/RunTest
ViewVC logotype

Diff of /code/trunk/RunTest

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

code/trunk/RunTest.in revision 73 by nigel, Sat Feb 24 21:40:30 2007 UTC code/trunk/RunTest revision 1123 by ph10, Wed Oct 17 18:06:16 2012 UTC
# Line 1  Line 1 
1  #! /bin/sh  #! /bin/sh
2    
3  # This file is generated by configure from RunTest.in. Make any changes  # Run the PCRE tests using the pcretest program. The appropriate tests are
4  # to that file.  # selected, depending on which build-time options were used.
5    #
6    # All tests are now run both with and without -s, to ensure that everything is
7    # tested with and without studying. However, there are some tests that produce
8    # different output after studying, typically when we are tracing the actual
9    # matching process (for example, using auto-callouts). In these few cases, the
10    # tests are duplicated in the files, one with /S to force studying always, and
11    # one with /SS to force *not* studying always. The use of -s doesn't then make
12    # any difference to their output. There is also one test which compiles invalid
13    # UTF-8 with the UTF-8 check turned off; for this, studying must also be
14    # disabled with /SS.
15    #
16    # When JIT support is available, all the tests are also run with -s+ to test
17    # (again, almost) everything with studying and the JIT option. There are also
18    # two tests for JIT-specific features, one to be run when JIT support is
19    # available, and one when it is not.
20    #
21    # Whichever of the 8-, 16- and 32-bit libraries exist are tested. It is also
22    # possible to select which to test by the arguments -8, -16 or -32.
23    #
24    # Other arguments for this script can be individual test numbers, or the word
25    # "valgrind", or "sim" followed by an argument to run cross-compiled
26    # executables under a simulator, for example:
27    #
28    # RunTest 3 sim "qemu-arm -s 8388608"
29    #
30    #
31    # There are two special cases where only one argument is allowed:
32    #
33    # If the first and only argument is "ebcdic", the script runs the special
34    # EBCDIC test that can be useful for checking certain EBCDIC features, even
35    # when run in an ASCII environment.
36    #
37    # If the script is obeyed as "RunTest list", a list of available tests is
38    # output, but none of them are run.
39    
40    
41    # Define test titles in variables so that they can be output as a list. Some
42    # of them are modified (e.g. with -8 or -16) when used in the actual tests.
43    
44    title1="Test 1: Main functionality (Compatible with Perl >= 5.10)"
45    title2="Test 2: API, errors, internals, and non-Perl stuff"
46    title3="Test 3: Locale-specific features"
47    title4A="Test 4: UTF"
48    title4B=" support (Compatible with Perl >= 5.10)"
49    title5="Test 5: API, internals, and non-Perl stuff for UTF"
50    title6="Test 6: Unicode property support (Compatible with Perl >= 5.10)"
51    title7="Test 7: API, internals, and non-Perl stuff for Unicode property support"
52    title8="Test 8: DFA matching main functionality"
53    title9="Test 9: DFA matching with UTF"
54    title10="Test 10: DFA matching with Unicode properties"
55    title11="Test 11: Internal offsets and code size tests"
56    title12="Test 12: JIT-specific features (JIT available)"
57    title13="Test 13: JIT-specific features (JIT not available)"
58    title14="Test 14: Specials for the basic 8-bit library"
59    title15="Test 15: Specials for the 8-bit library with UTF-8 support"
60    title16="Test 16: Specials for the 8-bit library with Unicode propery support"
61    title17="Test 17: Specials for the basic 16/32-bit library"
62    title18="Test 18: Specials for the 16/32-bit library with UTF-16/32 support"
63    title19="Test 19: Specials for the 16/32-bit library with Unicode property support"
64    title20="Test 20: DFA specials for the basic 16/32-bit library"
65    title21="Test 21: Reloads for the basic 16/32-bit library"
66    title22="Test 22: Reloads for the 16/32-bit library with UTF-16/32 support"
67    title23="Test 23: Specials for the 16-bit library"
68    title24="Test 24: Specials for the 16-bit library with UTF-16 support"
69    title25="Test 25: Specials for the 32-bit library"
70    title26="Test 26: Specials for the 32-bit library with UTF-32 support"
71    
72    if [ $# -eq 1 -a "$1" = "list" ]; then
73      echo $title1
74      echo $title2 "(not UTF)"
75      echo $title3
76      echo $title4A $title4B
77      echo $title5 support
78      echo $title6
79      echo $title7
80      echo $title8
81      echo $title9
82      echo $title10
83      echo $title11
84      echo $title12
85      echo $title13
86      echo $title14
87      echo $title15
88      echo $title16
89      echo $title17
90      echo $title18
91      echo $title19
92      echo $title20
93      echo $title21
94      echo $title22
95      echo $title23
96      echo $title24
97      echo $title25
98      echo $title26
99      exit 0
100    fi
101    
102    # Set up a suitable "diff" command for comparison. Some systems
103    # have a diff that lacks a -u option. Try to deal with this.
104    
105    cf="diff"
106    diff -u /dev/null /dev/null 2>/dev/null && cf="diff -u"
107    
108    # Find the test data
109    
110    if [ -n "$srcdir" -a -d "$srcdir" ] ; then
111      testdata="$srcdir/testdata"
112    elif [ -d "./testdata" ] ; then
113      testdata=./testdata
114    elif [ -d "../testdata" ] ; then
115      testdata=../testdata
116    else
117      echo "Cannot find the testdata directory"
118      exit 1
119    fi
120    
121    
122  # Run PCRE tests  # ------ Special EBCDIC Test -------
123    
124  cf=diff  if [ $# -eq 1 -a "$1" = "ebcdic" ]; then
125  testdata=@top_srcdir@/testdata    ./pcretest -C ebcdic >/dev/null
126      ebcdic=$?
127      if [ $ebcdic -ne 1 ] ; then
128        echo "Cannot run EBCDIC tests: EBCDIC support not compiled"
129        exit 1
130      fi
131    
132  # Select which tests to run; if no selection, run all    for opt in "" "-s" "-dfa" "-s -dfa"; do
133        ./pcretest -q $opt $testdata/testinputEBC >testtry
134        if [ $? = 0 ] ; then
135          $cf $testdata/testoutputEBC testtry
136          if [ $? != 0 ] ; then exit 1; fi
137        else exit 1
138        fi
139        if [ "$opt" = "-s" ] ; then echo "  OK with study"
140        elif [ "$opt" = "-dfa" ] ; then echo "  OK using DFA"
141        elif [ "$opt" = "-s -dfa" ] ; then echo "  OK using DFA with study"
142        else echo "  OK"
143        fi
144      done
145    
146    exit 0
147    fi
148    
149    
150    # ------ Normal Tests ------
151    
152    # Default values
153    
154    valgrind=
155    sim=
156    arg8=
157    arg16=
158    arg32=
159    
160    # This is in case the caller has set aliases (as I do - PH)
161    unset cp ls mv rm
162    
163    # Select which tests to run; for those that are explicitly requested, check
164    # that the necessary optional facilities are available.
165    
166  do1=no  do1=no
167  do2=no  do2=no
168  do3=no  do3=no
169  do4=no  do4=no
170  do5=no  do5=no
171    do6=no
172    do7=no
173    do8=no
174    do9=no
175    do10=no
176    do11=no
177    do12=no
178    do13=no
179    do14=no
180    do15=no
181    do16=no
182    do17=no
183    do18=no
184    do19=no
185    do20=no
186    do21=no
187    do22=no
188    do23=no
189    do24=no
190    do25=no
191    do26=no
192    
193  while [ $# -gt 0 ] ; do  while [ $# -gt 0 ] ; do
194    case $1 in    case $1 in
# Line 22  while [ $# -gt 0 ] ; do Line 196  while [ $# -gt 0 ] ; do
196      2) do2=yes;;      2) do2=yes;;
197      3) do3=yes;;      3) do3=yes;;
198      4) do4=yes;;      4) do4=yes;;
199      5) do5=yes;;      5) do5=yes;;
200      *) echo "Unknown test number $1"; exit 1;;      6) do6=yes;;
201        7) do7=yes;;
202        8) do8=yes;;
203        9) do9=yes;;
204       10) do10=yes;;
205       11) do11=yes;;
206       12) do12=yes;;
207       13) do13=yes;;
208       14) do14=yes;;
209       15) do15=yes;;
210       16) do16=yes;;
211       17) do17=yes;;
212       18) do18=yes;;
213       19) do19=yes;;
214       20) do20=yes;;
215       21) do21=yes;;
216       22) do22=yes;;
217       23) do23=yes;;
218       24) do24=yes;;
219       25) do25=yes;;
220       26) do26=yes;;
221       -8) arg8=yes;;
222      -16) arg16=yes;;
223      -32) arg32=yes;;
224       valgrind) valgrind="valgrind --tool=memcheck --num-callers=30 --leak-check=no --error-limit=no --smc-check=all --log-file=report.%p ";;
225       sim) shift; sim=$1;;
226        *) echo "Unknown test number '$1'"; exit 1;;
227    esac    esac
228    shift    shift
229  done  done
230    
231  if [ "@UTF8@" = "" ] ; then  # Find which optional facilities are available.
232    
233    $sim ./pcretest -C linksize >/dev/null
234    link_size=$?
235    if [ $link_size -lt 2 ] ; then
236      echo "Failed to find internal link size"
237      exit 1
238    fi
239    if [ $link_size -gt 4 ] ; then
240      echo "Failed to find internal link size"
241      exit 1
242    fi
243    
244    # All of 8-bit, 16-bit, and 32-bit character strings may be supported, but only
245    # one need be.
246    
247    $sim ./pcretest -C pcre8 >/dev/null
248    support8=$?
249    $sim ./pcretest -C pcre16 >/dev/null
250    support16=$?
251    $sim ./pcretest -C pcre32 >/dev/null
252    support32=$?
253    
254    # Initialize all bitsizes skipped
255    
256    test8=skip
257    test16=skip
258    test32=skip
259    
260    # If no bitsize arguments, select all that are available
261    
262    if [ "$arg8$arg16$arg32" = "" ] ; then
263      if [ $support8 -ne 0 ] ; then
264        test8=
265      fi
266      if [ $support16 -ne 0 ] ; then
267        test16=-16
268      fi
269      if [ $support32 -ne 0 ] ; then
270        test32=-32
271      fi
272    
273    # Select requested bit sizes
274    
275    else
276      if [ "$arg8" = yes ] ; then
277        if [ $support8 -eq 0 ] ; then
278          echo "Cannot run 8-bit library tests: 8-bit library not compiled"
279          exit 1
280        fi
281        test8=
282      fi
283      if [ "$arg16" = yes ] ; then
284        if [ $support16 -eq 0 ] ; then
285          echo "Cannot run 16-bit library tests: 16-bit library not compiled"
286          exit 1
287        fi
288        test16=-16
289      fi
290      if [ "$arg32" = yes ] ; then
291        if [ $support32 -eq 0 ] ; then
292          echo "Cannot run 32-bit library tests: 32-bit library not compiled"
293          exit 1
294        fi
295        test32=-32
296      fi
297    fi
298    
299    # UTF support always applies to all bit sizes if both are supported; we can't
300    # have UTF-8 support without UTF-16 support (for example).
301    
302    $sim ./pcretest -C utf >/dev/null
303    utf=$?
304    
305    $sim ./pcretest -C ucp >/dev/null
306    ucp=$?
307    
308    jitopt=
309    $sim ./pcretest -C jit >/dev/null
310    jit=$?
311    if [ $jit -ne 0 ] ; then
312      jitopt=-s+
313    fi
314    
315    if [ $utf -eq 0 ] ; then
316    if [ $do4 = yes ] ; then    if [ $do4 = yes ] ; then
317      echo "Can't run test 4 because UFT8 support is not configured"      echo "Can't run test 4 because UTF support is not configured"
318      exit 1      exit 1
319    fi    fi
320    if [ $do5 = yes ] ; then    if [ $do5 = yes ] ; then
321      echo "Can't run test 5 because UFT8 support is not configured"      echo "Can't run test 5 because UTF support is not configured"
322        exit 1
323      fi
324      if [ $do9 = yes ] ; then
325        echo "Can't run test 8 because UTF support is not configured"
326        exit 1
327      fi
328      if [ $do15 = yes ] ; then
329        echo "Can't run test 15 because UTF support is not configured"
330        exit 1
331      fi
332      if [ $do18 = yes ] ; then
333        echo "Can't run test 18 because UTF support is not configured"
334      fi
335      if [ $do22 = yes ] ; then
336        echo "Can't run test 22 because UTF support is not configured"
337      fi
338    fi
339    
340    if [ $ucp -eq 0 ] ; then
341      if [ $do6 = yes ] ; then
342        echo "Can't run test 6 because Unicode property support is not configured"
343        exit 1
344      fi
345      if [ $do7 = yes ] ; then
346        echo "Can't run test 7 because Unicode property support is not configured"
347        exit 1
348      fi
349      if [ $do10 = yes ] ; then
350        echo "Can't run test 10 because Unicode property support is not configured"
351        exit 1
352      fi
353      if [ $do16 = yes ] ; then
354        echo "Can't run test 16 because Unicode property support is not configured"
355        exit 1
356      fi
357      if [ $do19 = yes ] ; then
358        echo "Can't run test 19 because Unicode property support is not configured"
359      exit 1      exit 1
360    fi    fi
361  fi  fi
362    
363    if [ $link_size -ne 2 ] ; then
364      if [ $do11 = yes ] ; then
365        echo "Can't run test 11 because the link size ($link_size) is not 2"
366        exit 1
367      fi
368    fi
369    
370    if [ $jit -eq 0 ] ; then
371      if [ $do12 = "yes" ] ; then
372        echo "Can't run test 12 because JIT support is not configured"
373        exit 1
374      fi
375    else
376      if [ $do13 = "yes" ] ; then
377        echo "Can't run test 13 because JIT support is configured"
378        exit 1
379      fi
380    fi
381    
382    # If no specific tests were requested, select all. Those that are not
383    # relevant will be skipped.
384    
385  if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a\  if [ $do1  = no -a $do2  = no -a $do3  = no -a $do4  = no -a \
386       $do5 = no ] ; then       $do5  = no -a $do6  = no -a $do7  = no -a $do8  = no -a \
387         $do9  = no -a $do10 = no -a $do11 = no -a $do12 = no -a \
388         $do13 = no -a $do14 = no -a $do15 = no -a $do16 = no -a \
389         $do17 = no -a $do18 = no -a $do19 = no -a $do20 = no -a \
390         $do21 = no -a $do22 = no -a $do23 = no -a $do24 = no -a \
391         $do25 = no -a $do26 = no ] ; then
392    do1=yes    do1=yes
393    do2=yes    do2=yes
394    do3=yes    do3=yes
395    if [ "@UTF8@" != "" ] ; then do4=yes; fi    do4=yes
396    if [ "@UTF8@" != "" ] ; then do5=yes; fi    do5=yes
397      do6=yes
398      do7=yes
399      do8=yes
400      do9=yes
401      do10=yes
402      do11=yes
403      do12=yes
404      do13=yes
405      do14=yes
406      do15=yes
407      do16=yes
408      do17=yes
409      do18=yes
410      do19=yes
411      do20=yes
412      do21=yes
413      do22=yes
414      do23=yes
415      do24=yes
416      do25=yes
417      do26=yes
418  fi  fi
419    
420  # Show which release  # Extra test round for testing 32-bit UTF mode with high bits set
421    if test "$test32" != "skip" -a $utf -eq 1; then
422      test32plus="-32+"
423    else
424      test32plus=skip
425    fi
426    
427  ./pcretest /dev/null  # Show which release and which test data
428    
429  # Primary test, Perl-compatible  echo ""
430    echo PCRE C library tests using test data from $testdata
431    $sim ./pcretest /dev/null
432    
433    for bmode in "$test8" "$test16" "$test32" "$test32plus"; do
434      case "$bmode" in
435        skip) continue;;
436        -16)  if [ "$test8$test32" != "skipskip" ] ; then echo ""; fi
437              bits=16; echo "---- Testing 16-bit library ----"; echo "";;
438        -32)  if [ "$test8$test16" != "skipskip" ] ; then echo ""; fi
439              bits=32; echo "---- Testing 32-bit library ----"; echo "";;
440        -32+) echo ""
441              bits=32; echo "---- Testing 32-bit library UTF-32 mode with high bits set ----"; echo "";;
442        *)    bits=8; echo "---- Testing 8-bit library ----"; echo "";;
443      esac
444    
445  if [ $do1 = yes ] ; then    # When testing 32-bit UTF mode with high bits masked, skip all non-UTF tests
446    echo "Testing main functionality (Perl compatible)"    # Since this is the last test, we can just set doN=no
447    ./pcretest $testdata/testinput1 testtry    if test "$bmode" = "-32+"; then
448    if [ $? = 0 ] ; then      do1=no do2=no do3=no do8=no
449      $cf testtry $testdata/testoutput1      do12=no do13=no do14=no do15=no do16=no do17=no
450      if [ $? != 0 ] ; then exit 1; fi      do20=no do21=no do23=no do24=no do25=no
     echo " "  
   else exit 1  
451    fi    fi
 fi  
452    
453  # PCRE tests that are not Perl-compatible - API & error tests, mostly  # Primary test, compatible with JIT and all versions of Perl >= 5.8
454    
455  if [ $do2 = yes ] ; then  if [ $do1 = yes ] ; then
456    echo "Testing API and error handling (not Perl compatible)"    echo $title1
457    ./pcretest -i $testdata/testinput2 testtry    for opt in "" "-s" $jitopt; do
458    if [ $? = 0 ] ; then      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput1 testtry
459      $cf testtry $testdata/testoutput2      if [ $? = 0 ] ; then
460      if [ $? != 0 ] ; then exit 1; fi        $cf $testdata/testoutput1 testtry
461    else exit 1        if [ $? != 0 ] ; then exit 1; fi
462    fi      else exit 1
463        fi
464        if [ "$opt" = "-s" ] ; then echo "  OK with study"
465        elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
466        else echo "  OK"
467        fi
468      done
469  fi  fi
470    
471  if [ $do1 = yes -a $do2 = yes ] ; then  # PCRE tests that are not JIT or Perl-compatible: API, errors, internals
472    echo " "  
473    echo "The two main tests ran OK"  if [ $do2 = yes ] ; then
474    echo " "    echo $title2 "(not UTF-$bits)"
475      for opt in "" "-s" $jitopt; do
476        $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput2 testtry
477        if [ $? = 0 ] ; then
478          $cf $testdata/testoutput2 testtry
479          if [ $? != 0 ] ; then exit 1; fi
480        else
481          echo " "
482          echo "** Test 2 requires a lot of stack. If it has crashed with a"
483          echo "** segmentation fault, it may be that you do not have enough"
484          echo "** stack available by default. Please see the 'pcrestack' man"
485          echo "** page for a discussion of PCRE's stack usage."
486          echo " "
487          exit 1
488        fi
489        if [ "$opt" = "-s" ] ; then echo "  OK with study"
490        elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
491        else echo "  OK"
492        fi
493      done
494  fi  fi
495    
496  # Locale-specific tests, provided the "fr_FR" locale is available  # Locale-specific tests, provided that either the "fr_FR" or the "french"
497    # locale is available. The former is the Unix-like standard; the latter is
498    # for Windows. Another possibility is "fr", which needs to be run against
499    # the Windows-specific input and output files.
500    
501  if [ $do3 = yes ] ; then  if [ $do3 = yes ] ; then
502    locale -a | grep '^fr_FR$' >/dev/null    locale -a | grep '^fr_FR$' >/dev/null
503    if [ $? -eq 0 ] ; then    if [ $? -eq 0 ] ; then
504      echo "Testing locale-specific features (using 'fr_FR' locale)"      locale=fr_FR
505      ./pcretest $testdata/testinput3 testtry      infile=$testdata/testinput3
506      if [ $? = 0 ] ; then      outfile=$testdata/testoutput3
507        $cf testtry $testdata/testoutput3    else
508        if [ $? != 0 ] ; then      infile=test3input
509          echo " "      outfile=test3output
510          echo "Locale test did not run entirely successfully."      locale -a | grep '^french$' >/dev/null
511          echo "This usually means that there is a problem with the locale"      if [ $? -eq 0 ] ; then
512          echo "settings rather than a bug in PCRE."        locale=french
513          sed 's/fr_FR/french/' $testdata/testinput3 >test3input
514          sed 's/fr_FR/french/' $testdata/testoutput3 >test3output
515        else
516          locale -a | grep '^fr$' >/dev/null
517          if [ $? -eq 0 ] ; then
518            locale=fr
519            sed 's/fr_FR/fr/' $testdata/wintestinput3 >test3input
520            sed 's/fr_FR/fr/' $testdata/wintestoutput3 >test3output
521        else        else
522        echo "Locale test ran OK"          locale=
523        fi        fi
       echo " "  
     else exit 1  
524      fi      fi
525      fi
526    
527      if [ "$locale" != "" ] ; then
528        echo $title3 "(using '$locale' locale)"
529        for opt in "" "-s" $jitopt; do
530          $sim $valgrind ./pcretest -q $bmode $opt $infile testtry
531          if [ $? = 0 ] ; then
532            $cf $outfile testtry
533            if [ $? != 0 ] ; then
534              echo " "
535              echo "Locale test did not run entirely successfully."
536              echo "This usually means that there is a problem with the locale"
537              echo "settings rather than a bug in PCRE."
538              break;
539            else
540              if [ "$opt" = "-s" ] ; then echo "  OK with study"
541              elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
542              else echo "  OK"
543              fi
544            fi
545          else exit 1
546          fi
547        done
548    else    else
549      echo "Cannot test locale-specific features - 'fr_FR' locale not found,"      echo "Cannot test locale-specific features - none of the 'fr_FR', 'fr' or"
550      echo "or the \"locale\" command is not available to check for it."      echo "'french' locales exist, or the \"locale\" command is not available"
551      echo " "      echo "to check for them."
552        echo " "
553    fi    fi
554  fi  fi
555    
556  # Additional tests for UTF8 support  # Additional tests for UTF support
557    
558  if [ $do4 = yes ] ; then  if [ $do4 = yes ] ; then
559    echo "Testing UTF-8 support (Perl compatible)"    echo ${title4A}-${bits}${title4B}
560    ./pcretest $testdata/testinput4 testtry    if [ $utf -eq 0 ] ; then
561    if [ $? = 0 ] ; then      echo "  Skipped because UTF-$bits support is not available"
562      $cf testtry $testdata/testoutput4    else
563      if [ $? != 0 ] ; then exit 1; fi      for opt in "" "-s" $jitopt; do
564    else exit 1        $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput4 testtry
565          if [ $? = 0 ] ; then
566            $cf $testdata/testoutput4 testtry
567            if [ $? != 0 ] ; then exit 1; fi
568          else exit 1
569          fi
570          if [ "$opt" = "-s" ] ; then echo "  OK with study"
571          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
572          else echo "  OK"
573          fi
574        done
575    fi    fi
   echo "UTF8 test ran OK"  
   echo " "  
576  fi  fi
577    
578  if [ $do5 = yes ] ; then  if [ $do5 = yes ] ; then
579    echo "Testing API and internals for UTF-8 support (not Perl compatible)"    echo ${title5}-${bits} support
580    ./pcretest $testdata/testinput5 testtry    if [ $utf -eq 0 ] ; then
581    if [ $? = 0 ] ; then      echo "  Skipped because UTF-$bits support is not available"
582      $cf testtry $testdata/testoutput5    else
583      if [ $? != 0 ] ; then exit 1; fi      for opt in "" "-s" $jitopt; do
584    else exit 1        $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput5 testtry
585          if [ $? = 0 ] ; then
586            $cf $testdata/testoutput5 testtry
587            if [ $? != 0 ] ; then exit 1; fi
588          else exit 1
589          fi
590          if [ "$opt" = "-s" ] ; then echo "  OK with study"
591          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
592          else echo "  OK"
593          fi
594        done
595    fi    fi
   echo "UTF8 internals test ran OK"  
   echo " "  
596  fi  fi
597    
598    if [ $do6 = yes ] ; then
599      echo $title6
600      if [ $utf -eq 0 -o $ucp -eq 0 ] ; then
601        echo "  Skipped because Unicode property support is not available"
602      else
603        for opt in "" "-s" $jitopt; do
604          $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput6 testtry
605          if [ $? = 0 ] ; then
606            $cf $testdata/testoutput6 testtry
607            if [ $? != 0 ] ; then exit 1; fi
608          else exit 1
609          fi
610          if [ "$opt" = "-s" ] ; then echo "  OK with study"
611          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
612          else echo "  OK"
613          fi
614        done
615      fi
616    fi
617    
618    # Test non-Perl-compatible Unicode property support
619    
620    if [ $do7 = yes ] ; then
621      echo $title7
622      if [ $utf -eq 0 -o $ucp -eq 0 ] ; then
623        echo "  Skipped because Unicode property support is not available"
624      else
625        for opt in "" "-s" $jitopt; do
626          $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput7 testtry
627          if [ $? = 0 ] ; then
628            $cf $testdata/testoutput7 testtry
629            if [ $? != 0 ] ; then exit 1; fi
630          else exit 1
631          fi
632          if [ "$opt" = "-s" ] ; then echo "  OK with study"
633          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
634          else echo "  OK"
635          fi
636        done
637      fi
638    fi
639    
640    # Tests for DFA matching support
641    
642    if [ $do8 = yes ] ; then
643      echo $title8
644      for opt in "" "-s"; do
645        $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput8 testtry
646        if [ $? = 0 ] ; then
647          $cf $testdata/testoutput8 testtry
648          if [ $? != 0 ] ; then exit 1; fi
649        else exit 1
650        fi
651        if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
652      done
653    fi
654    
655    if [ $do9 = yes ] ; then
656      echo ${title9}-${bits}
657      if [ $utf -eq 0 ] ; then
658        echo "  Skipped because UTF-$bits support is not available"
659      else
660        for opt in "" "-s"; do
661          $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput9 testtry
662          if [ $? = 0 ] ; then
663            $cf $testdata/testoutput9 testtry
664            if [ $? != 0 ] ; then exit 1; fi
665          else exit 1
666          fi
667          if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
668        done
669      fi
670    fi
671    
672    if [ $do10 = yes ] ; then
673      echo $title10
674      if [ $utf -eq 0 -o $ucp -eq 0 ] ; then
675        echo "  Skipped because Unicode property support is not available"
676      else
677        for opt in "" "-s"; do
678          $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput10 testtry
679          if [ $? = 0 ] ; then
680            $cf $testdata/testoutput10 testtry
681            if [ $? != 0 ] ; then exit 1; fi
682          else exit 1
683          fi
684          if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
685        done
686      fi
687    fi
688    
689    # Test of internal offsets and code sizes. This test is run only when there
690    # is Unicode property support and the link size is 2. The actual tests are
691    # mostly the same as in some of the above, but in this test we inspect some
692    # offsets and sizes that require a known link size. This is a doublecheck for
693    # the maintainer, just in case something changes unexpectely. The output from
694    # this test is not the same in 8-bit and 16-bit modes.
695    
696    if [ $do11 = yes ] ; then
697      echo $title11
698      if [ $link_size -ne 2 ] ; then
699        echo "  Skipped because link size is not 2"
700      elif [ $ucp -eq 0 ] ; then
701        echo "  Skipped because Unicode property support is not available"
702      else
703        for opt in "" "-s"; do
704          $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput11 testtry
705          if [ $? = 0 ] ; then
706            $cf $testdata/testoutput11-$bits testtry
707            if [ $? != 0 ] ; then exit 1; fi
708          else exit 1
709          fi
710          if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
711        done
712      fi
713    fi
714    
715    # Test JIT-specific features when JIT is available
716    
717    if [ $do12 = yes ] ; then
718      echo $title12
719      if [ $jit -eq 0 ] ; then
720        echo "  Skipped because JIT is not available or not usable"
721      else
722        $sim $valgrind ./pcretest -q $bmode $testdata/testinput12 testtry
723        if [ $? = 0 ] ; then
724          $cf $testdata/testoutput12 testtry
725          if [ $? != 0 ] ; then exit 1; fi
726        else exit 1
727        fi
728        echo "  OK"
729      fi
730    fi
731    
732    # Test JIT-specific features when JIT is not available
733    
734    if [ $do13 = yes ] ; then
735      echo $title13
736      if [ $jit -ne 0 ] ; then
737        echo "  Skipped because JIT is available"
738      else
739        $sim $valgrind ./pcretest -q $bmode $testdata/testinput13 testtry
740        if [ $? = 0 ] ; then
741          $cf $testdata/testoutput13 testtry
742          if [ $? != 0 ] ; then exit 1; fi
743        else exit 1
744        fi
745        echo "  OK"
746      fi
747    fi
748    
749    # Tests for 8-bit-specific features
750    
751    if [ "$do14" = yes ] ; then
752      echo $title14
753      if [ "$bits" = "16" -o "$bits" = "32" ] ; then
754        echo "  Skipped when running 16/32-bit tests"
755      else
756        cp -f $testdata/saved16 testsaved16
757        cp -f $testdata/saved32 testsaved32
758        for opt in "" "-s" $jitopt; do
759          $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput14 testtry
760          if [ $? = 0 ] ; then
761            $cf $testdata/testoutput14 testtry
762            if [ $? != 0 ] ; then exit 1; fi
763          else exit 1
764          fi
765          if [ "$opt" = "-s" ] ; then echo "  OK with study"
766          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
767          else echo "  OK"
768          fi
769        done
770      fi
771    fi
772    
773    # Tests for 8-bit-specific features (needs UTF-8 support)
774    
775    if [ "$do15" = yes ] ; then
776      echo $title15
777      if [ "$bits" = "16" -o "$bits" = "32" ] ; then
778        echo "  Skipped when running 16/32-bit tests"
779      elif [ $utf -eq 0 ] ; then
780        echo "  Skipped because UTF-$bits support is not available"
781      else
782        for opt in "" "-s" $jitopt; do
783          $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput15 testtry
784          if [ $? = 0 ] ; then
785            $cf $testdata/testoutput15 testtry
786            if [ $? != 0 ] ; then exit 1; fi
787          else exit 1
788          fi
789          if [ "$opt" = "-s" ] ; then echo "  OK with study"
790          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
791          else echo "  OK"
792          fi
793        done
794      fi
795    fi
796    
797    # Tests for 8-bit-specific features (Unicode property support)
798    
799    if [ $do16 = yes ] ; then
800      echo $title16
801      if [ "$bits" = "16" -o "$bits" = "32" ] ; then
802        echo "  Skipped when running 16/32-bit tests"
803      elif [ $ucp -eq 0 ] ; then
804        echo "  Skipped because Unicode property support is not available"
805      else
806        for opt in "" "-s" $jitopt; do
807          $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput16 testtry
808          if [ $? = 0 ] ; then
809            $cf $testdata/testoutput16 testtry
810            if [ $? != 0 ] ; then exit 1; fi
811          else exit 1
812          fi
813          if [ "$opt" = "-s" ] ; then echo "  OK with study"
814          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
815          else echo "  OK"
816          fi
817        done
818      fi
819    fi
820    
821    # Tests for 16/32-bit-specific features
822    
823    if [ $do17 = yes ] ; then
824      echo $title17
825      if [ "$bits" = "8" ] ; then
826        echo "  Skipped when running 8-bit tests"
827      else
828        for opt in "" "-s" $jitopt; do
829          $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput17 testtry
830          if [ $? = 0 ] ; then
831            $cf $testdata/testoutput17 testtry
832            if [ $? != 0 ] ; then exit 1; fi
833          else exit 1
834          fi
835          if [ "$opt" = "-s" ] ; then echo "  OK with study"
836          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
837          else echo "  OK"
838          fi
839        done
840      fi
841    fi
842    
843    # Tests for 16/32-bit-specific features (UTF-16/32 support)
844    
845    if [ $do18 = yes ] ; then
846      echo $title18
847      if [ "$bits" = "8" ] ; then
848        echo "  Skipped when running 8-bit tests"
849      elif [ $utf -eq 0 ] ; then
850        echo "  Skipped because UTF-$bits support is not available"
851      else
852        for opt in "" "-s" $jitopt; do
853          $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput18 testtry
854          if [ $? = 0 ] ; then
855            $cf $testdata/testoutput18-$bits testtry
856            if [ $? != 0 ] ; then exit 1; fi
857          else exit 1
858          fi
859          if [ "$opt" = "-s" ] ; then echo "  OK with study"
860          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
861          else echo "  OK"
862          fi
863        done
864      fi
865    fi
866    
867    # Tests for 16/32-bit-specific features (Unicode property support)
868    
869    if [ $do19 = yes ] ; then
870      echo $title19
871      if [ "$bits" = "8" ] ; then
872        echo "  Skipped when running 8-bit tests"
873      elif [ $ucp -eq 0 ] ; then
874        echo "  Skipped because Unicode property support is not available"
875      else
876        for opt in "" "-s" $jitopt; do
877          $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput19 testtry
878          if [ $? = 0 ] ; then
879            $cf $testdata/testoutput19 testtry
880            if [ $? != 0 ] ; then exit 1; fi
881          else exit 1
882          fi
883          if [ "$opt" = "-s" ] ; then echo "  OK with study"
884          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
885          else echo "  OK"
886          fi
887        done
888      fi
889    fi
890    
891    # Tests for 16/32-bit-specific features in DFA non-UTF-16 mode
892    
893    if [ $do20 = yes ] ; then
894      echo $title20
895      if [ "$bits" = "8" ] ; then
896        echo "  Skipped when running 8-bit tests"
897      else
898        for opt in "" "-s"; do
899          $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput20 testtry
900          if [ $? = 0 ] ; then
901            $cf $testdata/testoutput20 testtry
902            if [ $? != 0 ] ; then exit 1; fi
903          else exit 1
904          fi
905          if [ "$opt" = "-s" ] ; then echo "  OK with study"
906          else echo "  OK"
907          fi
908        done
909      fi
910    fi
911    
912    # Tests for reloads with 16/32-bit library
913    
914    if [ $do21 = yes ] ; then
915      echo $title21
916      if [ "$bits" = "8" ] ; then
917        echo "  Skipped when running 8-bit tests"
918      elif [ $link_size -ne 2 ] ; then
919        echo "  Skipped because link size is not 2"
920      else
921        cp -f $testdata/saved8 testsaved8
922        cp -f $testdata/saved16LE-1 testsaved16LE-1
923        cp -f $testdata/saved16BE-1 testsaved16BE-1
924        cp -f $testdata/saved32LE-1 testsaved32LE-1
925        cp -f $testdata/saved32BE-1 testsaved32BE-1
926        $sim $valgrind ./pcretest -q $bmode $testdata/testinput21 testtry
927        if [ $? = 0 ] ; then
928          $cf $testdata/testoutput21-$bits testtry
929          if [ $? != 0 ] ; then exit 1; fi
930        else exit 1
931        fi
932        echo "  OK"
933      fi
934    fi
935    
936    # Tests for reloads with 16/32-bit library (UTF-16 support)
937    
938    if [ $do22 = yes ] ; then
939      echo $title22
940      if [ "$bits" = "8" ] ; then
941        echo "  Skipped when running 8-bit tests"
942      elif [ $utf -eq 0 ] ; then
943        echo "  Skipped because UTF-$bits support is not available"
944      elif [ $link_size -ne 2 ] ; then
945        echo "  Skipped because link size is not 2"
946      else
947        cp -f $testdata/saved16LE-2 testsaved16LE-2
948        cp -f $testdata/saved16BE-2 testsaved16BE-2
949        cp -f $testdata/saved32LE-2 testsaved32LE-2
950        cp -f $testdata/saved32BE-2 testsaved32BE-2
951        $sim $valgrind ./pcretest -q $bmode $testdata/testinput22 testtry
952        if [ $? = 0 ] ; then
953          $cf $testdata/testoutput22-$bits testtry
954          if [ $? != 0 ] ; then exit 1; fi
955        else exit 1
956        fi
957        echo "  OK"
958      fi
959    fi
960    
961    if [ $do23 = yes ] ; then
962      echo $title23
963      if [ "$bits" = "8" -o "$bits" = "32" ] ; then
964        echo "  Skipped when running 8/32-bit tests"
965      else
966        $sim $valgrind ./pcretest -q $bmode $testdata/testinput23 testtry
967        if [ $? = 0 ] ; then
968          $cf $testdata/testoutput23 testtry
969          if [ $? != 0 ] ; then exit 1; fi
970        else exit 1
971        fi
972        echo "  OK"
973      fi
974    fi
975    
976    if [ $do24 = yes ] ; then
977      echo $title24
978      if [ "$bits" = "8" -o "$bits" = "32" ] ; then
979        echo "  Skipped when running 8/32-bit tests"
980      elif [ $utf -eq 0 ] ; then
981        echo "  Skipped because UTF-$bits support is not available"
982      else
983        $sim $valgrind ./pcretest -q $bmode $testdata/testinput24 testtry
984        if [ $? = 0 ] ; then
985          $cf $testdata/testoutput24 testtry
986          if [ $? != 0 ] ; then exit 1; fi
987        else exit 1
988        fi
989        echo "  OK"
990      fi
991    fi
992    
993    if [ $do25 = yes ] ; then
994      echo $title25
995      if [ "$bits" = "8" -o "$bits" = "16" ] ; then
996        echo "  Skipped when running 8/16-bit tests"
997      else
998        $sim $valgrind ./pcretest -q $bmode $testdata/testinput25 testtry
999        if [ $? = 0 ] ; then
1000          $cf $testdata/testoutput25 testtry
1001          if [ $? != 0 ] ; then exit 1; fi
1002        else exit 1
1003        fi
1004        echo "  OK"
1005      fi
1006    fi
1007    
1008    if [ $do26 = yes ] ; then
1009      echo $title26
1010      if [ "$bits" = "8" -o "$bits" = "16" ] ; then
1011        echo "  Skipped when running 8/16-bit tests"
1012      elif [ $utf -eq 0 ] ; then
1013        echo "  Skipped because UTF-$bits support is not available"
1014      else
1015        $sim $valgrind ./pcretest -q $bmode $testdata/testinput26 testtry
1016        if [ $? = 0 ] ; then
1017          $cf $testdata/testoutput26 testtry
1018          if [ $? != 0 ] ; then exit 1; fi
1019        else exit 1
1020        fi
1021        echo "  OK"
1022      fi
1023    fi
1024    
1025    # End of loop for 8/16/32-bit tests
1026    done
1027    
1028    # Clean up local working files
1029    rm -f test3input test3output testNinput testsaved* teststderr teststdout testtry
1030    
1031  # End  # End

Legend:
Removed from v.73  
changed lines
  Added in v.1123

  ViewVC Help
Powered by ViewVC 1.1.5