Contents of /code/trunk/RunTest

#! /bin/sh

# Run the PCRE tests using the pcretest program. The appropriate tests are
# selected, depending on which build-time options were used.

# All tests are now run both with and without -s, to ensure that everything is
# tested with and without studying. However, there are some tests that produce
# different output after studying, typically when we are tracing the actual
# matching process (for example, using auto-callouts). In these few cases, the
# tests are duplicated in the files, one with /S to force studying always, and
# one with /SS to force *not* studying always. The use of -s doesn't then make
# any difference to their output. There is also one test which compiles invalid
# UTF-8 with the UTF-8 check turned off; for this, studying must also be
# disabled with /SS.

# When JIT support is available, all the tests are also run with -s+ to test
# (again, almost) everything with studying and the JIT option. There are also
# two tests for JIT-specific features, one to be run when JIT support is
# available, and one when it is not.

# Whichever of the 8-bit and 16-bit libraries exist are tested. It is also
# possible to select which to test by the arguments -8 or -16.

# Other arguments for this script can be individual test numbers, or the word
# "valgrind", or "sim" followed by an argument to run cross-compiled
# executables under a simulator, for example:
#
# RunTest 3 sim "qemu-arm -s 8388608"

valgrind=
sim=
arg8=
arg16=

# This is in case the caller has set aliases (as I do - PH)
unset cp ls mv rm

# Select which tests to run; for those that are explicitly requested, check
# that the necessary optional facilities are available.

do1=no
do2=no
do3=no
do4=no
do5=no
do6=no
do7=no
do8=no
do9=no
do10=no
do11=no
do12=no
do13=no
do14=no
do15=no
do16=no
do17=no
do18=no
do19=no
do20=no
do21=no
do22=no

while [ $# -gt 0 ] ; do
  case $1 in
    1) do1=yes;;
    2) do2=yes;;
    3) do3=yes;;
    4) do4=yes;;
    5) do5=yes;;
    6) do6=yes;;
    7) do7=yes;;
    8) do8=yes;;
    9) do9=yes;;
   10) do10=yes;;
   11) do11=yes;;
   12) do12=yes;;
   13) do13=yes;;
   14) do14=yes;;
   15) do15=yes;;
   16) do16=yes;;
   17) do17=yes;;
   18) do18=yes;;
   19) do19=yes;;
   20) do20=yes;;
   21) do21=yes;;
   22) do22=yes;;
   -8) arg8=yes;;
  -16) arg16=yes;;
   valgrind) valgrind="valgrind -q --smc-check=all";;
   sim) shift; sim=$1;;
    *) echo "Unknown test number $1"; exit 1;;
  esac
  shift
done

# Set up a suitable "diff" command for comparison. Some systems
# have a diff that lacks a -u option. Try to deal with this.

if diff -u /dev/null /dev/null; then cf="diff -u"; else cf="diff"; fi

# Find the test data

if [ -n "$srcdir" -a -d "$srcdir" ] ; then
  testdata="$srcdir/testdata"
elif [ -d "./testdata" ] ; then
  testdata=./testdata
elif [ -d "../testdata" ] ; then
  testdata=../testdata
else
  echo "Cannot find the testdata directory"
  exit 1
fi

# Find which optional facilities are available. In some Windows environments
# the output of pcretest -C has CRLF at the end of each line, but the shell
# strips only linefeeds from the output of a `backquoted` command. Hence the
# alternative patterns.

$sim ./pcretest -C linksize >/dev/null
link_size=$?
if [ $link_size -lt 2 ] ; then
  echo "Failed to find internal link size"
  exit 1
fi
if [ $link_size -gt 4 ] ; then
  echo "Failed to find internal link size"
  exit 1
fi

# Both 8-bit and 16-bit character strings may be supported, but only one
# need be.

$sim ./pcretest -C pcre8 >/dev/null
support8=$?
$sim ./pcretest -C pcre16 >/dev/null
support16=$?
if [ $(( $support8 + $support16 )) -eq 2 ] ; then
  test8=
  test16=-16
  if [ "$arg8" = yes -a "$arg16" != yes ] ; then
    test16=skip
  fi
  if [ "$arg16" = yes -a "$arg8" != yes ] ; then
    test8=skip
  fi
else
  if [ $support8 -ne 0 ] ; then
    if [ "$arg16" = yes ] ; then
      echo "Cannot run 16-bit library tests: 16-bit library not compiled"
      exit 1
    fi
    test8=
    test16=skip
  else
    if [ "$arg8" = yes ] ; then
      echo "Cannot run 8-bit library tests: 8-bit library not compiled"
      exit 1
    fi
    test8=skip
    test16=-16
  fi
fi

# UTF support always applies to both bit sizes if both are supported; we can't
# have UTF-8 support without UTF-16 support (for example).

$sim ./pcretest -C utf >/dev/null
utf=$?

$sim ./pcretest -C ucp >/dev/null
ucp=$?

jitopt=
$sim ./pcretest -C jit >/dev/null
jit=$?
if [ $jit -ne 0 ] ; then
  jitopt=-s+
fi

if [ $utf -eq 0 ] ; then
  if [ $do4 = yes ] ; then
    echo "Can't run test 4 because UTF support is not configured"
    exit 1
  fi
  if [ $do5 = yes ] ; then
    echo "Can't run test 5 because UTF support is not configured"
    exit 1
  fi
  if [ $do9 = yes ] ; then
    echo "Can't run test 8 because UTF support is not configured"
    exit 1
  fi
  if [ $do15 = yes ] ; then
    echo "Can't run test 15 because UTF support is not configured"
    exit 1
  fi
  if [ $do18 = yes ] ; then
    echo "Can't run test 18 because UTF support is not configured"
  fi
  if [ $do22 = yes ] ; then
    echo "Can't run test 22 because UTF support is not configured"
  fi
fi

if [ $ucp -eq 0 ] ; then
  if [ $do6 = yes ] ; then
    echo "Can't run test 6 because Unicode property support is not configured"
    exit 1
  fi
  if [ $do7 = yes ] ; then
    echo "Can't run test 7 because Unicode property support is not configured"
    exit 1
  fi
  if [ $do10 = yes ] ; then
    echo "Can't run test 10 because Unicode property support is not configured"
    exit 1
  fi
  if [ $do16 = yes ] ; then
    echo "Can't run test 16 because Unicode property support is not configured"
    exit 1
  fi
  if [ $do19 = yes ] ; then
    echo "Can't run test 19 because Unicode property support is not configured"
    exit 1
  fi
fi

if [ $link_size -ne 2 ] ; then
  if [ $do11 = yes ] ; then
    echo "Can't run test 11 because the link size ($link_size) is not 2"
    exit 1
  fi
fi

if [ $jit -eq 0 ] ; then
  if [ $do12 = "yes" ] ; then
    echo "Can't run test 12 because JIT support is not configured"
    exit 1
  fi
else
  if [ $do13 = "yes" ] ; then
    echo "Can't run test 13 because JIT support is configured"
    exit 1
  fi
fi

# If no specific tests were requested, select all. Those that are not
# relevant will be skipped.

if [ $do1  = no -a $do2  = no -a $do3  = no -a $do4  = no -a \
     $do5  = no -a $do6  = no -a $do7  = no -a $do8  = no -a \
     $do9  = no -a $do10 = no -a $do11 = no -a $do12 = no -a \
     $do13 = no -a $do14 = no -a $do15 = no -a $do16 = no -a \
     $do17 = no -a $do18 = no -a $do19 = no -a $do20 = no -a \
     $do21 = no -a $do22 = no ] ; then
  do1=yes
  do2=yes
  do3=yes
  do4=yes
  do5=yes
  do6=yes
  do7=yes
  do8=yes
  do9=yes
  do10=yes
  do11=yes
  do12=yes
  do13=yes
  do14=yes
  do15=yes
  do16=yes
  do17=yes
  do18=yes
  do19=yes
  do20=yes
  do21=yes
  do22=yes
fi

# Show which release and which test data

echo ""
echo PCRE C library tests using test data from $testdata
$sim ./pcretest /dev/null

for bmode in "$test8" "$test16"; do
  case "$bmode" in
    skip) continue;;
    -16)  if [ "$test8" != "skip" ] ; then echo ""; fi
          bits=16; echo "---- Testing 16-bit library ----"; echo "";;
    *)    bits=8; echo "---- Testing 8-bit library ----"; echo "";;
  esac

# Primary test, compatible with JIT and all versions of Perl >= 5.8

if [ $do1 = yes ] ; then
  echo "Test 1: main functionality (Compatible with Perl >= 5.10)"
  for opt in "" "-s" $jitopt; do
    $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput1 testtry
    if [ $? = 0 ] ; then
      $cf $testdata/testoutput1 testtry
      if [ $? != 0 ] ; then exit 1; fi
    else exit 1
    fi
    if [ "$opt" = "-s" ] ; then echo "  OK with study"
    elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
    else echo "  OK"
    fi
  done
fi

# PCRE tests that are not JIT or Perl-compatible: API, errors, internals

if [ $do2 = yes ] ; then
  echo "Test 2: API, errors, internals, and non-Perl stuff (not UTF-$bits)"
  for opt in "" "-s" $jitopt; do
    $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput2 testtry
    if [ $? = 0 ] ; then
      $cf $testdata/testoutput2 testtry
      if [ $? != 0 ] ; then exit 1; fi
    else
      echo " "
      echo "** Test 2 requires a lot of stack. If it has crashed with a"
      echo "** segmentation fault, it may be that you do not have enough"
      echo "** stack available by default. Please see the 'pcrestack' man"
      echo "** page for a discussion of PCRE's stack usage."
      echo " "
      exit 1
    fi
    if [ "$opt" = "-s" ] ; then echo "  OK with study"
    elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
    else echo "  OK"
    fi
  done
fi

# Locale-specific tests, provided that either the "fr_FR" or the "french"
# locale is available. The former is the Unix-like standard; the latter is
# for Windows. Another possibility is "fr", which needs to be run against
# the Windows-specific input and output files.

if [ $do3 = yes ] ; then
  locale -a | grep '^fr_FR$' >/dev/null
  if [ $? -eq 0 ] ; then
    locale=fr_FR
    infile=$testdata/testinput3
    outfile=$testdata/testoutput3
  else
    infile=test3input
    outfile=test3output
    locale -a | grep '^french$' >/dev/null
    if [ $? -eq 0 ] ; then
      locale=french
      sed 's/fr_FR/french/' $testdata/testinput3 >test3input
      sed 's/fr_FR/french/' $testdata/testoutput3 >test3output
    else
      locale -a | grep '^fr$' >/dev/null
      if [ $? -eq 0 ] ; then
        locale=fr
        sed 's/fr_FR/fr/' $testdata/wintestinput3 >test3input
        sed 's/fr_FR/fr/' $testdata/wintestoutput3 >test3output
      else
        locale=
      fi
    fi
  fi

  if [ "$locale" != "" ] ; then
    echo "Test 3: locale-specific features (using '$locale' locale)"
    for opt in "" "-s" $jitopt; do
      $sim $valgrind ./pcretest -q $bmode $opt $infile testtry
      if [ $? = 0 ] ; then
        $cf $outfile testtry
        if [ $? != 0 ] ; then
          echo " "
          echo "Locale test did not run entirely successfully."
          echo "This usually means that there is a problem with the locale"
          echo "settings rather than a bug in PCRE."
          break;
        else
          if [ "$opt" = "-s" ] ; then echo "  OK with study"
          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
          else echo "  OK"
          fi
        fi
      else exit 1
      fi
    done
  else
    echo "Cannot test locale-specific features - none of the 'fr_FR', 'fr' or"
    echo "'french' locales exist, or the \"locale\" command is not available"
    echo "to check for them."
    echo " "
  fi
fi

# Additional tests for UTF support

if [ $do4 = yes ] ; then
  echo "Test 4: UTF-$bits support (Compatible with Perl >= 5.10)"
  if [ $utf -eq 0 ] ; then
    echo "  Skipped because UTF-$bits support is not available"
  else
    for opt in "" "-s" $jitopt; do
      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput4 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput4 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study"
      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
      else echo "  OK"
      fi
    done
  fi
fi

if [ $do5 = yes ] ; then
  echo "Test 5: API, internals, and non-Perl stuff for UTF-$bits support"
  if [ $utf -eq 0 ] ; then
    echo "  Skipped because UTF-$bits support is not available"
  else
    for opt in "" "-s" $jitopt; do
      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput5 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput5 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study"
      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
      else echo "  OK"
      fi
    done
  fi
fi

if [ $do6 = yes ] ; then
  echo "Test 6: Unicode property support (Compatible with Perl >= 5.10)"
  if [ $utf -eq 0 -o $ucp -eq 0 ] ; then
    echo "  Skipped because Unicode property support is not available"
  else
    for opt in "" "-s" $jitopt; do
      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput6 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput6 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study"
      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
      else echo "  OK"
      fi
    done
  fi
fi

# Test non-Perl-compatible Unicode property support

if [ $do7 = yes ] ; then
  echo "Test 7: API, internals, and non-Perl stuff for Unicode property support"
  if [ $utf -eq 0 -o $ucp -eq 0 ] ; then
    echo "  Skipped because Unicode property support is not available"
  else
    for opt in "" "-s" $jitopt; do
      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput7 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput7 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study"
      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
      else echo "  OK"
      fi
    done
  fi
fi

# Tests for DFA matching support

if [ $do8 = yes ] ; then
  echo "Test 8: DFA matching main functionality"
  for opt in "" "-s"; do
    $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput8 testtry
    if [ $? = 0 ] ; then
      $cf $testdata/testoutput8 testtry
      if [ $? != 0 ] ; then exit 1; fi
    else exit 1
    fi
    if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
  done
fi

if [ $do9 = yes ] ; then
  echo "Test 9: DFA matching with UTF-$bits"
  if [ $utf -eq 0 ] ; then
    echo "  Skipped because UTF-$bits support is not available"
  else
    for opt in "" "-s"; do
      $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput9 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput9 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
    done
  fi
fi

if [ $do10 = yes ] ; then
  echo "Test 10: DFA matching with Unicode properties"
  if [ $utf -eq 0 -o $ucp -eq 0 ] ; then
    echo "  Skipped because Unicode property support is not available"
  else
    for opt in "" "-s"; do
      $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput10 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput10 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
    done
  fi
fi

# Test of internal offsets and code sizes. This test is run only when there
# is Unicode property support and the link size is 2. The actual tests are
# mostly the same as in some of the above, but in this test we inspect some
# offsets and sizes that require a known link size. This is a doublecheck for
# the maintainer, just in case something changes unexpectely. The output from
# this test is not the same in 8-bit and 16-bit modes.

if [ $do11 = yes ] ; then
  echo "Test 11: Internal offsets and code size tests"
  if [ $link_size -ne 2 ] ; then
    echo "  Skipped because link size is not 2"
  elif [ $ucp -eq 0 ] ; then
    echo "  Skipped because Unicode property support is not available"
  else
    for opt in "" "-s"; do
      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput11 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput11-$bits testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
    done
  fi
fi

# Test JIT-specific features when JIT is available

if [ $do12 = yes ] ; then
  echo "Test 12: JIT-specific features (JIT available)"
  if [ $jit -eq 0 ] ; then
    echo "  Skipped because JIT is not available or not usable"
  else
    $sim $valgrind ./pcretest -q $bmode $testdata/testinput12 testtry
    if [ $? = 0 ] ; then
      $cf $testdata/testoutput12 testtry
      if [ $? != 0 ] ; then exit 1; fi
    else exit 1
    fi
    echo "  OK"
  fi
fi

# Test JIT-specific features when JIT is not available

if [ $do13 = yes ] ; then
  echo "Test 13: JIT-specific features (JIT not available)"
  if [ $jit -ne 0 ] ; then
    echo "  Skipped because JIT is available"
  else
    $sim $valgrind ./pcretest -q $bmode $testdata/testinput13 testtry
    if [ $? = 0 ] ; then
      $cf $testdata/testoutput13 testtry
      if [ $? != 0 ] ; then exit 1; fi
    else exit 1
    fi
    echo "  OK"
  fi
fi

# Tests for 8-bit-specific features

if [ "$do14" = yes ] ; then
  echo "Test 14: specials for the basic 8-bit library"
  if [ "$bits" = "16" ] ; then
    echo "  Skipped when running 16-bit tests"
  else
    cp -f $testdata/saved16 testsaved16
    for opt in "" "-s" $jitopt; do
      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput14 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput14 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study"
      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
      else echo "  OK"
      fi
    done
  fi
fi

# Tests for 8-bit-specific features (needs UTF-8 support)

if [ "$do15" = yes ] ; then
  echo "Test 15: specials for the 8-bit library with UTF-8 support"
  if [ "$bits" = "16" ] ; then
    echo "  Skipped when running 16-bit tests"
  elif [ $utf -eq 0 ] ; then
    echo "  Skipped because UTF-$bits support is not available"
  else
    for opt in "" "-s" $jitopt; do
      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput15 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput15 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study"
      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
      else echo "  OK"
      fi
    done
  fi
fi

# Tests for 8-bit-specific features (Unicode property support)

if [ $do16 = yes ] ; then
  echo "Test 16: specials for the 8-bit library with Unicode propery support"
  if [ "$bits" = "16" ] ; then
    echo "  Skipped when running 16-bit tests"
  elif [ $ucp -eq 0 ] ; then
    echo "  Skipped because Unicode property support is not available"
  else
    for opt in "" "-s" $jitopt; do
      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput16 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput16 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study"
      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
      else echo "  OK"
      fi
    done
  fi
fi

# Tests for 16-bit-specific features

if [ $do17 = yes ] ; then
  echo "Test 17: specials for the basic 16-bit library"
  if [ "$bits" = "8" ] ; then
    echo "  Skipped when running 8-bit tests"
  else
    for opt in "" "-s" $jitopt; do
      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput17 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput17 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study"
      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
      else echo "  OK"
      fi
    done
  fi
fi

# Tests for 16-bit-specific features (UTF-16 support)

if [ $do18 = yes ] ; then
  echo "Test 18: specials for the 16-bit library with UTF-16 support"
  if [ "$bits" = "8" ] ; then
    echo "  Skipped when running 8-bit tests"
  elif [ $utf -eq 0 ] ; then
    echo "  Skipped because UTF-$bits support is not available"
  else
    for opt in "" "-s" $jitopt; do
      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput18 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput18 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study"
      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
      else echo "  OK"
      fi
    done
  fi
fi

# Tests for 16-bit-specific features (Unicode property support)

if [ $do19 = yes ] ; then
  echo "Test 19: specials for the 16-bit library with Unicode propery support"
  if [ "$bits" = "8" ] ; then
    echo "  Skipped when running 8-bit tests"
  elif [ $ucp -eq 0 ] ; then
    echo "  Skipped because Unicode property support is not available"
  else
    for opt in "" "-s" $jitopt; do
      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput19 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput19 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study"
      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
      else echo "  OK"
      fi
    done
  fi
fi

# Tests for 16-bit-specific features in DFA non-UTF-16 mode

if [ $do20 = yes ] ; then
  echo "Test 20: DFA specials for the basic 16-bit library"
  if [ "$bits" = "8" ] ; then
    echo "  Skipped when running 8-bit tests"
  else
    for opt in "" "-s"; do
      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput20 testtry
      if [ $? = 0 ] ; then
        $cf $testdata/testoutput20 testtry
        if [ $? != 0 ] ; then exit 1; fi
      else exit 1
      fi
      if [ "$opt" = "-s" ] ; then echo "  OK with study"
      else echo "  OK"
      fi
    done
  fi
fi

# Tests for reloads with 16-bit library

if [ $do21 = yes ] ; then
  echo "Test 21: reloads for the basic 16-bit library"
  if [ "$bits" = "8" ] ; then
    echo "  Skipped when running 8-bit tests"
  elif [ $link_size -ne 2 ] ; then
    echo "  Skipped because link size is not 2"
  else
    cp -f $testdata/saved8 testsaved8
    cp -f $testdata/saved16LE-1 testsaved16LE-1
    cp -f $testdata/saved16BE-1 testsaved16BE-1
    $sim $valgrind ./pcretest -q $bmode $testdata/testinput21 testtry
    if [ $? = 0 ] ; then
      $cf $testdata/testoutput21 testtry
      if [ $? != 0 ] ; then exit 1; fi
    else exit 1
    fi
    echo "  OK"
  fi
fi

# Tests for reloads with 16-bit library (UTF-16 support)

if [ $do22 = yes ] ; then
  echo "Test 22: reloads for the 16-bit library with UTF-16 support"
  if [ "$bits" = "8" ] ; then
    echo "  Skipped when running 8-bit tests"
  elif [ $utf -eq 0 ] ; then
    echo "  Skipped because UTF-$bits support is not available"
  elif [ $link_size -ne 2 ] ; then
    echo "  Skipped because link size is not 2"
  else
    cp -f $testdata/saved16LE-2 testsaved16LE-2
    cp -f $testdata/saved16BE-2 testsaved16BE-2
    $sim $valgrind ./pcretest -q $bmode $testdata/testinput22 testtry
    if [ $? = 0 ] ; then
      $cf $testdata/testoutput22 testtry
      if [ $? != 0 ] ; then exit 1; fi
    else exit 1
    fi
    echo "  OK"
  fi
fi

# End of loop for 8-bit/16-bit tests
done

# Clean up local working files
rm -f test3input test3output testNinput testsaved* teststderr teststdout testtry

# End
Name	Value
svn:executable	*
svn:keywords	"Author Date Id Revision Url"