| 1 |
#! /bin/sh |
#! /bin/sh |
| 2 |
|
|
| 3 |
# Run PCRE tests. |
# Run the PCRE tests using the pcretest program. The appropriate tests are |
| 4 |
|
# selected, depending on which build-time options were used. |
| 5 |
|
|
| 6 |
valgrind= |
# All tests are now run both with and without -s, to ensure that everything is |
| 7 |
|
# tested with and without studying. However, there are some tests that produce |
| 8 |
# Set up a suitable "diff" command for comparison. Some systems |
# different output after studying, typically when we are tracing the actual |
| 9 |
# have a diff that lacks a -u option. Try to deal with this. |
# matching process (for example, using auto-callouts). In these few cases, the |
| 10 |
|
# tests are duplicated in the files, one with /S to force studying always, and |
| 11 |
if diff -u /dev/null /dev/null; then cf="diff -u"; else cf="diff"; fi |
# one with /SS to force *not* studying always. The use of -s doesn't then make |
| 12 |
|
# any difference to their output. There is also one test which compiles invalid |
| 13 |
|
# UTF-8 with the UTF-8 check turned off; for this, studying must also be |
| 14 |
|
# disabled with /SS. |
| 15 |
|
|
| 16 |
|
# When JIT support is available, all the tests are also run with -s+ to test |
| 17 |
|
# (again, almost) everything with studying and the JIT option. There are also |
| 18 |
|
# two tests for JIT-specific features, one to be run when JIT support is |
| 19 |
|
# available, and one when it is not. |
| 20 |
|
|
| 21 |
|
# Whichever of the 8-bit and 16-bit libraries exist are tested. It is also |
| 22 |
|
# possible to select which to test by the arguments -8 or -16. |
| 23 |
|
|
| 24 |
|
# Other arguments for this script can be individual test numbers, or the word |
| 25 |
|
# "valgrind", or "sim" followed by an argument to run cross-compiled |
| 26 |
|
# executables under a simulator, for example: |
| 27 |
|
# |
| 28 |
|
# RunTest 3 sim "qemu-arm -s 8388608" |
| 29 |
|
|
| 30 |
# Find the test data |
valgrind= |
| 31 |
|
sim= |
| 32 |
testdata=testdata |
arg8= |
| 33 |
if [ -n "$srcdir" -a -d "$srcdir" ] ; then |
arg16= |
|
testdata="$srcdir/testdata" |
|
|
fi |
|
|
|
|
|
# Find which optional facilities are available |
|
|
|
|
|
case `./pcretest -C | ./pcregrep 'Internal link size'` in |
|
|
*2) link_size=2;; |
|
|
*3) link_size=3;; |
|
|
*4) link_size=4;; |
|
|
*) echo "Failed to find internal link size"; exit 1;; |
|
|
esac |
|
|
|
|
|
./pcretest -C | ./pcregrep 'No UTF-8 support' >/dev/null |
|
|
utf8=$? |
|
|
|
|
|
./pcretest -C | ./pcregrep 'No Unicode properties support' >/dev/null |
|
|
ucp=$? |
|
| 34 |
|
|
| 35 |
# Select which tests to run; for those that are explicitly requested, check |
# Select which tests to run; for those that are explicitly requested, check |
| 36 |
# that the necessary optional facilities are available. |
# that the necessary optional facilities are available. |
| 45 |
do8=no |
do8=no |
| 46 |
do9=no |
do9=no |
| 47 |
do10=no |
do10=no |
| 48 |
|
do11=no |
| 49 |
|
do12=no |
| 50 |
|
do13=no |
| 51 |
|
do14=no |
| 52 |
|
do15=no |
| 53 |
|
do16=no |
| 54 |
|
do17=no |
| 55 |
|
do18=no |
| 56 |
|
do19=no |
| 57 |
|
do20=no |
| 58 |
|
|
| 59 |
while [ $# -gt 0 ] ; do |
while [ $# -gt 0 ] ; do |
| 60 |
case $1 in |
case $1 in |
| 68 |
8) do8=yes;; |
8) do8=yes;; |
| 69 |
9) do9=yes;; |
9) do9=yes;; |
| 70 |
10) do10=yes;; |
10) do10=yes;; |
| 71 |
valgrind) valgrind="valgrind -q";; |
11) do11=yes;; |
| 72 |
|
12) do12=yes;; |
| 73 |
|
13) do13=yes;; |
| 74 |
|
14) do14=yes;; |
| 75 |
|
15) do15=yes;; |
| 76 |
|
16) do16=yes;; |
| 77 |
|
17) do17=yes;; |
| 78 |
|
18) do18=yes;; |
| 79 |
|
19) do19=yes;; |
| 80 |
|
20) do20=yes;; |
| 81 |
|
-8) arg8=yes;; |
| 82 |
|
-16) arg16=yes;; |
| 83 |
|
valgrind) valgrind="valgrind -q --smc-check=all";; |
| 84 |
|
sim) shift; sim=$1;; |
| 85 |
*) echo "Unknown test number $1"; exit 1;; |
*) echo "Unknown test number $1"; exit 1;; |
| 86 |
esac |
esac |
| 87 |
shift |
shift |
| 88 |
done |
done |
| 89 |
|
|
| 90 |
if [ $utf8 -eq 0 ] ; then |
# Set up a suitable "diff" command for comparison. Some systems |
| 91 |
|
# have a diff that lacks a -u option. Try to deal with this. |
| 92 |
|
|
| 93 |
|
if diff -u /dev/null /dev/null; then cf="diff -u"; else cf="diff"; fi |
| 94 |
|
|
| 95 |
|
# Find the test data |
| 96 |
|
|
| 97 |
|
if [ -n "$srcdir" -a -d "$srcdir" ] ; then |
| 98 |
|
testdata="$srcdir/testdata" |
| 99 |
|
elif [ -d "./testdata" ] ; then |
| 100 |
|
testdata=./testdata |
| 101 |
|
elif [ -d "../testdata" ] ; then |
| 102 |
|
testdata=../testdata |
| 103 |
|
else |
| 104 |
|
echo "Cannot find the testdata directory" |
| 105 |
|
exit 1 |
| 106 |
|
fi |
| 107 |
|
|
| 108 |
|
# Find which optional facilities are available. In some Windows environments |
| 109 |
|
# the output of pcretest -C has CRLF at the end of each line, but the shell |
| 110 |
|
# strips only linefeeds from the output of a `backquoted` command. Hence the |
| 111 |
|
# alternative patterns. |
| 112 |
|
|
| 113 |
|
$sim ./pcretest -C linksize >/dev/null |
| 114 |
|
link_size=$? |
| 115 |
|
if [ $link_size -lt 2 ] ; then |
| 116 |
|
echo "Failed to find internal link size" |
| 117 |
|
exit 1 |
| 118 |
|
fi |
| 119 |
|
if [ $link_size -gt 4 ] ; then |
| 120 |
|
echo "Failed to find internal link size" |
| 121 |
|
exit 1 |
| 122 |
|
fi |
| 123 |
|
|
| 124 |
|
# Both 8-bit and 16-bit character strings may be supported, but only one |
| 125 |
|
# need be. |
| 126 |
|
|
| 127 |
|
$sim ./pcretest -C pcre8 >/dev/null |
| 128 |
|
support8=$? |
| 129 |
|
$sim ./pcretest -C pcre16 >/dev/null |
| 130 |
|
support16=$? |
| 131 |
|
if [ $(( $support8 + $support16 )) -eq 2 ] ; then |
| 132 |
|
test8= |
| 133 |
|
test16=-16 |
| 134 |
|
if [ "$arg8" = yes -a "$arg16" != yes ] ; then |
| 135 |
|
test16=skip |
| 136 |
|
fi |
| 137 |
|
if [ "$arg16" = yes -a "$arg8" != yes ] ; then |
| 138 |
|
test8=skip |
| 139 |
|
fi |
| 140 |
|
else |
| 141 |
|
if [ $support8 -ne 0 ] ; then |
| 142 |
|
if [ "$arg16" = yes ] ; then |
| 143 |
|
echo "Cannot run 16-bit library tests: 16-bit library not compiled" |
| 144 |
|
exit 1 |
| 145 |
|
fi |
| 146 |
|
test8= |
| 147 |
|
test16=skip |
| 148 |
|
else |
| 149 |
|
if [ "$arg8" = yes ] ; then |
| 150 |
|
echo "Cannot run 8-bit library tests: 8-bit library not compiled" |
| 151 |
|
exit 1 |
| 152 |
|
fi |
| 153 |
|
test8=skip |
| 154 |
|
test16=-16 |
| 155 |
|
fi |
| 156 |
|
fi |
| 157 |
|
|
| 158 |
|
# UTF support always applies to both bit sizes if both are supported; we can't |
| 159 |
|
# have UTF-8 support without UTF-16 support (for example). |
| 160 |
|
|
| 161 |
|
$sim ./pcretest -C utf >/dev/null |
| 162 |
|
utf=$? |
| 163 |
|
|
| 164 |
|
$sim ./pcretest -C ucp >/dev/null |
| 165 |
|
ucp=$? |
| 166 |
|
|
| 167 |
|
jitopt= |
| 168 |
|
$sim ./pcretest -C jit >/dev/null |
| 169 |
|
jit=$? |
| 170 |
|
if [ $jit -ne 0 ] ; then |
| 171 |
|
jitopt=-s+ |
| 172 |
|
fi |
| 173 |
|
|
| 174 |
|
if [ $utf -eq 0 ] ; then |
| 175 |
if [ $do4 = yes ] ; then |
if [ $do4 = yes ] ; then |
| 176 |
echo "Can't run test 4 because UTF-8 support is not configured" |
echo "Can't run test 4 because UTF support is not configured" |
| 177 |
exit 1 |
exit 1 |
| 178 |
fi |
fi |
| 179 |
if [ $do5 = yes ] ; then |
if [ $do5 = yes ] ; then |
| 180 |
echo "Can't run test 5 because UTF-8 support is not configured" |
echo "Can't run test 5 because UTF support is not configured" |
| 181 |
|
exit 1 |
| 182 |
|
fi |
| 183 |
|
if [ $do9 = yes ] ; then |
| 184 |
|
echo "Can't run test 8 because UTF support is not configured" |
| 185 |
exit 1 |
exit 1 |
| 186 |
fi |
fi |
| 187 |
if [ $do8 = yes ] ; then |
if [ $do15 = yes ] ; then |
| 188 |
echo "Can't run test 8 because UTF-8 support is not configured" |
echo "Can't run test 15 because UTF support is not configured" |
| 189 |
exit 1 |
exit 1 |
| 190 |
fi |
fi |
| 191 |
|
if [ $do18 = yes ] ; then |
| 192 |
|
echo "Can't run test 18 because UTF support is not configured" |
| 193 |
|
fi |
| 194 |
fi |
fi |
| 195 |
|
|
| 196 |
if [ $ucp -eq 0 ] ; then |
if [ $ucp -eq 0 ] ; then |
| 198 |
echo "Can't run test 6 because Unicode property support is not configured" |
echo "Can't run test 6 because Unicode property support is not configured" |
| 199 |
exit 1 |
exit 1 |
| 200 |
fi |
fi |
| 201 |
if [ $do9 = yes ] ; then |
if [ $do7 = yes ] ; then |
| 202 |
echo "Can't run test 9 because Unicode property support is not configured" |
echo "Can't run test 7 because Unicode property support is not configured" |
| 203 |
exit 1 |
exit 1 |
| 204 |
fi |
fi |
| 205 |
if [ $do10 = yes ] ; then |
if [ $do10 = yes ] ; then |
| 206 |
echo "Can't run test 10 because Unicode property support is not configured" |
echo "Can't run test 10 because Unicode property support is not configured" |
| 207 |
exit 1 |
exit 1 |
| 208 |
fi |
fi |
| 209 |
|
if [ $do16 = yes ] ; then |
| 210 |
|
echo "Can't run test 16 because Unicode property support is not configured" |
| 211 |
|
exit 1 |
| 212 |
|
fi |
| 213 |
|
if [ $do19 = yes ] ; then |
| 214 |
|
echo "Can't run test 19 because Unicode property support is not configured" |
| 215 |
|
exit 1 |
| 216 |
|
fi |
| 217 |
fi |
fi |
| 218 |
|
|
| 219 |
if [ $link_size -ne 2 ] ; then |
if [ $link_size -ne 2 ] ; then |
| 220 |
if [ $do10 = yes ] ; then |
if [ $do11 = yes ] ; then |
| 221 |
echo "Can't run test 10 because the link size ($link_size) is not 2" |
echo "Can't run test 11 because the link size ($link_size) is not 2" |
| 222 |
exit 1 |
exit 1 |
| 223 |
fi |
fi |
| 224 |
fi |
fi |
| 225 |
|
|
| 226 |
# If no specific tests were requested, select all that are relevant. |
if [ $jit -eq 0 ] ; then |
| 227 |
|
if [ $do12 = "yes" ] ; then |
| 228 |
|
echo "Can't run test 12 because JIT support is not configured" |
| 229 |
|
exit 1 |
| 230 |
|
fi |
| 231 |
|
else |
| 232 |
|
if [ $do13 = "yes" ] ; then |
| 233 |
|
echo "Can't run test 13 because JIT support is configured" |
| 234 |
|
exit 1 |
| 235 |
|
fi |
| 236 |
|
fi |
| 237 |
|
|
| 238 |
if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a \ |
# If no specific tests were requested, select all. Those that are not |
| 239 |
$do5 = no -a $do6 = no -a $do7 = no -a $do8 = no -a \ |
# relevant will be skipped. |
| 240 |
$do9 = no -a $do10 = no ] ; then |
|
| 241 |
|
if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a \ |
| 242 |
|
$do5 = no -a $do6 = no -a $do7 = no -a $do8 = no -a \ |
| 243 |
|
$do9 = no -a $do10 = no -a $do11 = no -a $do12 = no -a \ |
| 244 |
|
$do13 = no -a $do14 = no -a $do15 = no -a $do16 = no -a \ |
| 245 |
|
$do17 = no -a $do18 = no -a $do19 = no -a $do20 = no ] ; then |
| 246 |
do1=yes |
do1=yes |
| 247 |
do2=yes |
do2=yes |
| 248 |
do3=yes |
do3=yes |
| 249 |
if [ $utf8 -ne 0 ] ; then do4=yes; fi |
do4=yes |
| 250 |
if [ $utf8 -ne 0 ] ; then do5=yes; fi |
do5=yes |
| 251 |
if [ $utf8 -ne 0 -a $ucp -ne 0 ] ; then do6=yes; fi |
do6=yes |
| 252 |
do7=yes |
do7=yes |
| 253 |
if [ $utf8 -ne 0 ] ; then do8=yes; fi |
do8=yes |
| 254 |
if [ $utf8 -ne 0 -a $ucp -ne 0 ] ; then do9=yes; fi |
do9=yes |
| 255 |
if [ $link_size -eq 2 -a $ucp -ne 0 ] ; then do10=yes; fi |
do10=yes |
| 256 |
|
do11=yes |
| 257 |
|
do12=yes |
| 258 |
|
do13=yes |
| 259 |
|
do14=yes |
| 260 |
|
do15=yes |
| 261 |
|
do16=yes |
| 262 |
|
do17=yes |
| 263 |
|
do18=yes |
| 264 |
|
do19=yes |
| 265 |
|
do20=yes |
| 266 |
fi |
fi |
| 267 |
|
|
| 268 |
# Show which release |
# Show which release and which test data |
| 269 |
|
|
| 270 |
echo "" |
echo "" |
| 271 |
echo PCRE C library tests |
echo PCRE C library tests using test data from $testdata |
| 272 |
./pcretest /dev/null |
$sim ./pcretest /dev/null |
| 273 |
|
|
| 274 |
# Primary test, Perl-compatible |
for bmode in "$test8" "$test16"; do |
| 275 |
|
case "$bmode" in |
| 276 |
|
skip) continue;; |
| 277 |
|
-16) if [ "$test8" != "skip" ] ; then echo ""; fi |
| 278 |
|
bits=16; echo "---- Testing 16-bit library ----"; echo "";; |
| 279 |
|
*) bits=8; echo "---- Testing 8-bit library ----"; echo "";; |
| 280 |
|
esac |
| 281 |
|
|
| 282 |
|
# Primary test, compatible with JIT and all versions of Perl >= 5.8 |
| 283 |
|
|
| 284 |
if [ $do1 = yes ] ; then |
if [ $do1 = yes ] ; then |
| 285 |
echo "Test 1: main functionality (Perl compatible)" |
echo "Test 1: main functionality (Compatible with Perl >= 5.10)" |
| 286 |
$valgrind ./pcretest -q $testdata/testinput1 testtry |
for opt in "" "-s" $jitopt; do |
| 287 |
if [ $? = 0 ] ; then |
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput1 testtry |
| 288 |
$cf $testdata/testoutput1 testtry |
if [ $? = 0 ] ; then |
| 289 |
if [ $? != 0 ] ; then exit 1; fi |
$cf $testdata/testoutput1 testtry |
| 290 |
else exit 1 |
if [ $? != 0 ] ; then exit 1; fi |
| 291 |
fi |
else exit 1 |
| 292 |
echo "OK" |
fi |
| 293 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 294 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 295 |
|
else echo " OK" |
| 296 |
|
fi |
| 297 |
|
done |
| 298 |
fi |
fi |
| 299 |
|
|
| 300 |
# PCRE tests that are not Perl-compatible - API & error tests, mostly |
# PCRE tests that are not JIT or Perl-compatible: API, errors, internals |
| 301 |
|
|
| 302 |
if [ $do2 = yes ] ; then |
if [ $do2 = yes ] ; then |
| 303 |
echo "Test 2: API and error handling (not Perl compatible)" |
echo "Test 2: API, errors, internals, and non-Perl stuff (not UTF-$bits)" |
| 304 |
$valgrind ./pcretest -q $testdata/testinput2 testtry |
for opt in "" "-s" $jitopt; do |
| 305 |
if [ $? = 0 ] ; then |
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput2 testtry |
| 306 |
$cf $testdata/testoutput2 testtry |
if [ $? = 0 ] ; then |
| 307 |
if [ $? != 0 ] ; then exit 1; fi |
$cf $testdata/testoutput2 testtry |
| 308 |
else |
if [ $? != 0 ] ; then exit 1; fi |
| 309 |
echo " " |
else |
| 310 |
echo "** Test 2 requires a lot of stack. If it has crashed with a" |
echo " " |
| 311 |
echo "** segmentation fault, it may be that you do not have enough" |
echo "** Test 2 requires a lot of stack. If it has crashed with a" |
| 312 |
echo "** stack available by default. Please see the 'pcrestack' man" |
echo "** segmentation fault, it may be that you do not have enough" |
| 313 |
echo "** page for a discussion of PCRE's stack usage." |
echo "** stack available by default. Please see the 'pcrestack' man" |
| 314 |
echo " " |
echo "** page for a discussion of PCRE's stack usage." |
| 315 |
exit 1 |
echo " " |
| 316 |
fi |
exit 1 |
| 317 |
echo "OK" |
fi |
| 318 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 319 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 320 |
|
else echo " OK" |
| 321 |
|
fi |
| 322 |
|
done |
| 323 |
fi |
fi |
| 324 |
|
|
| 325 |
# Locale-specific tests, provided that either the "fr_FR" or the "french" |
# Locale-specific tests, provided that either the "fr_FR" or the "french" |
| 326 |
# locale is available. The former is the Unix-like standard; the latter is |
# locale is available. The former is the Unix-like standard; the latter is |
| 327 |
# for Windows. |
# for Windows. Another possibility is "fr", which needs to be run against |
| 328 |
|
# the Windows-specific input and output files. |
| 329 |
|
|
| 330 |
if [ $do3 = yes ] ; then |
if [ $do3 = yes ] ; then |
| 331 |
locale -a | grep '^fr_FR$' >/dev/null |
locale -a | grep '^fr_FR$' >/dev/null |
| 334 |
infile=$testdata/testinput3 |
infile=$testdata/testinput3 |
| 335 |
outfile=$testdata/testoutput3 |
outfile=$testdata/testoutput3 |
| 336 |
else |
else |
| 337 |
|
infile=test3input |
| 338 |
|
outfile=test3output |
| 339 |
locale -a | grep '^french$' >/dev/null |
locale -a | grep '^french$' >/dev/null |
| 340 |
if [ $? -eq 0 ] ; then |
if [ $? -eq 0 ] ; then |
| 341 |
locale=french |
locale=french |
| 342 |
sed 's/fr_FR/french/' $testdata/testinput3 >test3input |
sed 's/fr_FR/french/' $testdata/testinput3 >test3input |
| 343 |
sed 's/fr_FR/french/' $testdata/testoutput3 >test3output |
sed 's/fr_FR/french/' $testdata/testoutput3 >test3output |
|
infile=test3input |
|
|
outfile=test3output |
|
| 344 |
else |
else |
| 345 |
locale= |
locale -a | grep '^fr$' >/dev/null |
| 346 |
|
if [ $? -eq 0 ] ; then |
| 347 |
|
locale=fr |
| 348 |
|
sed 's/fr_FR/fr/' $testdata/wintestinput3 >test3input |
| 349 |
|
sed 's/fr_FR/fr/' $testdata/wintestoutput3 >test3output |
| 350 |
|
else |
| 351 |
|
locale= |
| 352 |
|
fi |
| 353 |
fi |
fi |
| 354 |
fi |
fi |
| 355 |
|
|
| 356 |
if [ "$locale" != "" ] ; then |
if [ "$locale" != "" ] ; then |
| 357 |
echo "Test 3: locale-specific features (using '$locale' locale)" |
echo "Test 3: locale-specific features (using '$locale' locale)" |
| 358 |
$valgrind ./pcretest -q $infile testtry |
for opt in "" "-s" $jitopt; do |
| 359 |
if [ $? = 0 ] ; then |
$sim $valgrind ./pcretest -q $bmode $opt $infile testtry |
| 360 |
$cf $outfile testtry |
if [ $? = 0 ] ; then |
| 361 |
if [ $? != 0 ] ; then |
$cf $outfile testtry |
| 362 |
echo " " |
if [ $? != 0 ] ; then |
| 363 |
echo "Locale test did not run entirely successfully." |
echo " " |
| 364 |
echo "This usually means that there is a problem with the locale" |
echo "Locale test did not run entirely successfully." |
| 365 |
echo "settings rather than a bug in PCRE." |
echo "This usually means that there is a problem with the locale" |
| 366 |
else |
echo "settings rather than a bug in PCRE." |
| 367 |
echo "OK" |
break; |
| 368 |
|
else |
| 369 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 370 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 371 |
|
else echo " OK" |
| 372 |
|
fi |
| 373 |
|
fi |
| 374 |
|
else exit 1 |
| 375 |
fi |
fi |
| 376 |
else exit 1 |
done |
|
fi |
|
| 377 |
else |
else |
| 378 |
echo "Cannot test locale-specific features - neither the 'fr_FR' nor the" |
echo "Cannot test locale-specific features - none of the 'fr_FR', 'fr' or" |
| 379 |
echo "'french' locale exists, or the \"locale\" command is not available" |
echo "'french' locales exist, or the \"locale\" command is not available" |
| 380 |
echo "to check for them." |
echo "to check for them." |
| 381 |
echo " " |
echo " " |
| 382 |
fi |
fi |
| 383 |
fi |
fi |
| 384 |
|
|
| 385 |
# Additional tests for UTF8 support |
# Additional tests for UTF support |
| 386 |
|
|
| 387 |
if [ $do4 = yes ] ; then |
if [ $do4 = yes ] ; then |
| 388 |
echo "Test 4: UTF-8 support (Perl compatible)" |
echo "Test 4: UTF-$bits support (Compatible with Perl >= 5.10)" |
| 389 |
$valgrind ./pcretest -q $testdata/testinput4 testtry |
if [ $utf -eq 0 ] ; then |
| 390 |
if [ $? = 0 ] ; then |
echo " Skipped because UTF-$bits support is not available" |
| 391 |
$cf $testdata/testoutput4 testtry |
else |
| 392 |
if [ $? != 0 ] ; then exit 1; fi |
for opt in "" "-s" $jitopt; do |
| 393 |
else exit 1 |
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput4 testtry |
| 394 |
|
if [ $? = 0 ] ; then |
| 395 |
|
$cf $testdata/testoutput4 testtry |
| 396 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 397 |
|
else exit 1 |
| 398 |
|
fi |
| 399 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 400 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 401 |
|
else echo " OK" |
| 402 |
|
fi |
| 403 |
|
done |
| 404 |
fi |
fi |
|
echo "OK" |
|
| 405 |
fi |
fi |
| 406 |
|
|
| 407 |
if [ $do5 = yes ] ; then |
if [ $do5 = yes ] ; then |
| 408 |
echo "Test 5: API and internals for UTF-8 support (not Perl compatible)" |
echo "Test 5: API, internals, and non-Perl stuff for UTF-$bits support" |
| 409 |
$valgrind ./pcretest -q $testdata/testinput5 testtry |
if [ $utf -eq 0 ] ; then |
| 410 |
if [ $? = 0 ] ; then |
echo " Skipped because UTF-$bits support is not available" |
| 411 |
$cf $testdata/testoutput5 testtry |
else |
| 412 |
if [ $? != 0 ] ; then exit 1; fi |
for opt in "" "-s" $jitopt; do |
| 413 |
else exit 1 |
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput5 testtry |
| 414 |
|
if [ $? = 0 ] ; then |
| 415 |
|
$cf $testdata/testoutput5 testtry |
| 416 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 417 |
|
else exit 1 |
| 418 |
|
fi |
| 419 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 420 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 421 |
|
else echo " OK" |
| 422 |
|
fi |
| 423 |
|
done |
| 424 |
fi |
fi |
|
echo "OK" |
|
| 425 |
fi |
fi |
| 426 |
|
|
| 427 |
if [ $do6 = yes ] ; then |
if [ $do6 = yes ] ; then |
| 428 |
echo "Test 6: Unicode property support" |
echo "Test 6: Unicode property support (Compatible with Perl >= 5.10)" |
| 429 |
$valgrind ./pcretest -q $testdata/testinput6 testtry |
if [ $utf -eq 0 -o $ucp -eq 0 ] ; then |
| 430 |
if [ $? = 0 ] ; then |
echo " Skipped because Unicode property support is not available" |
| 431 |
$cf $testdata/testoutput6 testtry |
else |
| 432 |
if [ $? != 0 ] ; then exit 1; fi |
for opt in "" "-s" $jitopt; do |
| 433 |
else exit 1 |
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput6 testtry |
| 434 |
|
if [ $? = 0 ] ; then |
| 435 |
|
$cf $testdata/testoutput6 testtry |
| 436 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 437 |
|
else exit 1 |
| 438 |
|
fi |
| 439 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 440 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 441 |
|
else echo " OK" |
| 442 |
|
fi |
| 443 |
|
done |
| 444 |
fi |
fi |
|
echo "OK" |
|
| 445 |
fi |
fi |
| 446 |
|
|
| 447 |
# Tests for DFA matching support |
# Test non-Perl-compatible Unicode property support |
| 448 |
|
|
| 449 |
if [ $do7 = yes ] ; then |
if [ $do7 = yes ] ; then |
| 450 |
echo "Test 7: DFA matching" |
echo "Test 7: API, internals, and non-Perl stuff for Unicode property support" |
| 451 |
$valgrind ./pcretest -q -dfa $testdata/testinput7 testtry |
if [ $utf -eq 0 -o $ucp -eq 0 ] ; then |
| 452 |
if [ $? = 0 ] ; then |
echo " Skipped because Unicode property support is not available" |
| 453 |
$cf $testdata/testoutput7 testtry |
else |
| 454 |
if [ $? != 0 ] ; then exit 1; fi |
for opt in "" "-s" $jitopt; do |
| 455 |
else exit 1 |
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput7 testtry |
| 456 |
|
if [ $? = 0 ] ; then |
| 457 |
|
$cf $testdata/testoutput7 testtry |
| 458 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 459 |
|
else exit 1 |
| 460 |
|
fi |
| 461 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 462 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 463 |
|
else echo " OK" |
| 464 |
|
fi |
| 465 |
|
done |
| 466 |
fi |
fi |
|
echo "OK" |
|
| 467 |
fi |
fi |
| 468 |
|
|
| 469 |
|
# Tests for DFA matching support |
| 470 |
|
|
| 471 |
if [ $do8 = yes ] ; then |
if [ $do8 = yes ] ; then |
| 472 |
echo "Test 8: DFA matching with UTF-8" |
echo "Test 8: DFA matching main functionality" |
| 473 |
$valgrind ./pcretest -q -dfa $testdata/testinput8 testtry |
for opt in "" "-s"; do |
| 474 |
if [ $? = 0 ] ; then |
$sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput8 testtry |
| 475 |
$cf $testdata/testoutput8 testtry |
if [ $? = 0 ] ; then |
| 476 |
if [ $? != 0 ] ; then exit 1; fi |
$cf $testdata/testoutput8 testtry |
| 477 |
else exit 1 |
if [ $? != 0 ] ; then exit 1; fi |
| 478 |
fi |
else exit 1 |
| 479 |
echo "OK" |
fi |
| 480 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi |
| 481 |
|
done |
| 482 |
fi |
fi |
| 483 |
|
|
| 484 |
if [ $do9 = yes ] ; then |
if [ $do9 = yes ] ; then |
| 485 |
echo "Test 9: DFA matching with Unicode properties" |
echo "Test 9: DFA matching with UTF-$bits" |
| 486 |
$valgrind ./pcretest -q -dfa $testdata/testinput9 testtry |
if [ $utf -eq 0 ] ; then |
| 487 |
if [ $? = 0 ] ; then |
echo " Skipped because UTF-$bits support is not available" |
| 488 |
$cf $testdata/testoutput9 testtry |
else |
| 489 |
if [ $? != 0 ] ; then exit 1; fi |
for opt in "" "-s"; do |
| 490 |
else exit 1 |
$sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput9 testtry |
| 491 |
|
if [ $? = 0 ] ; then |
| 492 |
|
$cf $testdata/testoutput9 testtry |
| 493 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 494 |
|
else exit 1 |
| 495 |
|
fi |
| 496 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi |
| 497 |
|
done |
| 498 |
|
fi |
| 499 |
|
fi |
| 500 |
|
|
| 501 |
|
if [ $do10 = yes ] ; then |
| 502 |
|
echo "Test 10: DFA matching with Unicode properties" |
| 503 |
|
if [ $utf -eq 0 -o $ucp -eq 0 ] ; then |
| 504 |
|
echo " Skipped because Unicode property support is not available" |
| 505 |
|
else |
| 506 |
|
for opt in "" "-s"; do |
| 507 |
|
$sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput10 testtry |
| 508 |
|
if [ $? = 0 ] ; then |
| 509 |
|
$cf $testdata/testoutput10 testtry |
| 510 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 511 |
|
else exit 1 |
| 512 |
|
fi |
| 513 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi |
| 514 |
|
done |
| 515 |
fi |
fi |
|
echo "OK" |
|
| 516 |
fi |
fi |
| 517 |
|
|
| 518 |
# Test of internal offsets and code sizes. This test is run only when there |
# Test of internal offsets and code sizes. This test is run only when there |
| 519 |
# is Unicode property support and the link size is 2. The actual tests are |
# is Unicode property support and the link size is 2. The actual tests are |
| 520 |
# mostly the same as in some of the above, but in this test we inspect some |
# mostly the same as in some of the above, but in this test we inspect some |
| 521 |
# offsets and sizes that require a known link size. This is a doublecheck for |
# offsets and sizes that require a known link size. This is a doublecheck for |
| 522 |
# the maintainer, just in case something changes unexpectely. |
# the maintainer, just in case something changes unexpectely. The output from |
| 523 |
|
# this test is not the same in 8-bit and 16-bit modes. |
| 524 |
|
|
| 525 |
if [ $do10 = yes ] ; then |
if [ $do11 = yes ] ; then |
| 526 |
echo "Test 10: Internal offsets and code size tests" |
echo "Test 11: Internal offsets and code size tests" |
| 527 |
$valgrind ./pcretest -q $testdata/testinput10 testtry |
if [ $link_size -ne 2 ] ; then |
| 528 |
if [ $? = 0 ] ; then |
echo " Skipped because link size is not 2" |
| 529 |
$cf $testdata/testoutput10 testtry |
elif [ $ucp -eq 0 ] ; then |
| 530 |
if [ $? != 0 ] ; then exit 1; fi |
echo " Skipped because Unicode property support is not available" |
| 531 |
else exit 1 |
else |
| 532 |
|
for opt in "" "-s"; do |
| 533 |
|
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput11 testtry |
| 534 |
|
if [ $? = 0 ] ; then |
| 535 |
|
$cf $testdata/testoutput11-$bits testtry |
| 536 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 537 |
|
else exit 1 |
| 538 |
|
fi |
| 539 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi |
| 540 |
|
done |
| 541 |
fi |
fi |
|
echo "OK" |
|
| 542 |
fi |
fi |
| 543 |
|
|
| 544 |
|
# Test JIT-specific features when JIT is available |
| 545 |
|
|
| 546 |
|
if [ $do12 = yes ] ; then |
| 547 |
|
echo "Test 12: JIT-specific features (JIT available)" |
| 548 |
|
if [ $jit -eq 0 ] ; then |
| 549 |
|
echo " Skipped because JIT is not available or not usable" |
| 550 |
|
else |
| 551 |
|
$sim $valgrind ./pcretest -q $bmode $testdata/testinput12 testtry |
| 552 |
|
if [ $? = 0 ] ; then |
| 553 |
|
$cf $testdata/testoutput12 testtry |
| 554 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 555 |
|
else exit 1 |
| 556 |
|
fi |
| 557 |
|
echo " OK" |
| 558 |
|
fi |
| 559 |
|
fi |
| 560 |
|
|
| 561 |
|
# Test JIT-specific features when JIT is not available |
| 562 |
|
|
| 563 |
|
if [ $do13 = yes ] ; then |
| 564 |
|
echo "Test 13: JIT-specific features (JIT not available)" |
| 565 |
|
if [ $jit -ne 0 ] ; then |
| 566 |
|
echo " Skipped because JIT is available" |
| 567 |
|
else |
| 568 |
|
$sim $valgrind ./pcretest -q $bmode $testdata/testinput13 testtry |
| 569 |
|
if [ $? = 0 ] ; then |
| 570 |
|
$cf $testdata/testoutput13 testtry |
| 571 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 572 |
|
else exit 1 |
| 573 |
|
fi |
| 574 |
|
echo " OK" |
| 575 |
|
fi |
| 576 |
|
fi |
| 577 |
|
|
| 578 |
|
# Tests for 8-bit-specific features |
| 579 |
|
|
| 580 |
|
if [ "$do14" = yes ] ; then |
| 581 |
|
echo "Test 14: specials for the basic 8-bit library" |
| 582 |
|
if [ "$bits" = "16" ] ; then |
| 583 |
|
echo " Skipped when running 16-bit tests" |
| 584 |
|
elif [ $utf -eq 0 ] ; then |
| 585 |
|
echo " Skipped because UTF-$bits support is not available" |
| 586 |
|
else |
| 587 |
|
for opt in "" "-s" $jitopt; do |
| 588 |
|
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput14 testtry |
| 589 |
|
if [ $? = 0 ] ; then |
| 590 |
|
$cf $testdata/testoutput14 testtry |
| 591 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 592 |
|
else exit 1 |
| 593 |
|
fi |
| 594 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 595 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 596 |
|
else echo " OK" |
| 597 |
|
fi |
| 598 |
|
done |
| 599 |
|
fi |
| 600 |
|
fi |
| 601 |
|
|
| 602 |
|
# Tests for 8-bit-specific features (needs UTF-8 support) |
| 603 |
|
|
| 604 |
|
if [ "$do15" = yes ] ; then |
| 605 |
|
echo "Test 15: specials for the 8-bit library with UTF-8 support" |
| 606 |
|
if [ "$bits" = "16" ] ; then |
| 607 |
|
echo " Skipped when running 16-bit tests" |
| 608 |
|
elif [ $utf -eq 0 ] ; then |
| 609 |
|
echo " Skipped because UTF-$bits support is not available" |
| 610 |
|
else |
| 611 |
|
for opt in "" "-s" $jitopt; do |
| 612 |
|
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput15 testtry |
| 613 |
|
if [ $? = 0 ] ; then |
| 614 |
|
$cf $testdata/testoutput15 testtry |
| 615 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 616 |
|
else exit 1 |
| 617 |
|
fi |
| 618 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 619 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 620 |
|
else echo " OK" |
| 621 |
|
fi |
| 622 |
|
done |
| 623 |
|
fi |
| 624 |
|
fi |
| 625 |
|
|
| 626 |
|
# Tests for 8-bit-specific features (Unicode property support) |
| 627 |
|
|
| 628 |
|
if [ $do16 = yes ] ; then |
| 629 |
|
echo "Test 16: specials for the 8-bit library with Unicode propery support" |
| 630 |
|
if [ "$bits" = "16" ] ; then |
| 631 |
|
echo " Skipped when running 16-bit tests" |
| 632 |
|
elif [ $ucp -eq 0 ] ; then |
| 633 |
|
echo " Skipped because Unicode property support is not available" |
| 634 |
|
else |
| 635 |
|
for opt in "" "-s" $jitopt; do |
| 636 |
|
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput16 testtry |
| 637 |
|
if [ $? = 0 ] ; then |
| 638 |
|
$cf $testdata/testoutput16 testtry |
| 639 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 640 |
|
else exit 1 |
| 641 |
|
fi |
| 642 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 643 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 644 |
|
else echo " OK" |
| 645 |
|
fi |
| 646 |
|
done |
| 647 |
|
fi |
| 648 |
|
fi |
| 649 |
|
|
| 650 |
|
# Tests for 16-bit-specific features |
| 651 |
|
|
| 652 |
|
if [ $do17 = yes ] ; then |
| 653 |
|
echo "Test 17: specials for the basic 16-bit library" |
| 654 |
|
if [ "$bits" = "8" ] ; then |
| 655 |
|
echo " Skipped when running 8-bit tests" |
| 656 |
|
else |
| 657 |
|
for opt in "" "-s" $jitopt; do |
| 658 |
|
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput17 testtry |
| 659 |
|
if [ $? = 0 ] ; then |
| 660 |
|
$cf $testdata/testoutput17 testtry |
| 661 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 662 |
|
else exit 1 |
| 663 |
|
fi |
| 664 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 665 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 666 |
|
else echo " OK" |
| 667 |
|
fi |
| 668 |
|
done |
| 669 |
|
fi |
| 670 |
|
fi |
| 671 |
|
|
| 672 |
|
# Tests for 16-bit-specific features (UTF-16 support) |
| 673 |
|
|
| 674 |
|
if [ $do18 = yes ] ; then |
| 675 |
|
echo "Test 18: specials for the 16-bit library with UTF-16 support" |
| 676 |
|
if [ "$bits" = "8" ] ; then |
| 677 |
|
echo " Skipped when running 8-bit tests" |
| 678 |
|
elif [ $utf -eq 0 ] ; then |
| 679 |
|
echo " Skipped because UTF-$bits support is not available" |
| 680 |
|
else |
| 681 |
|
for opt in "" "-s" $jitopt; do |
| 682 |
|
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput18 testtry |
| 683 |
|
if [ $? = 0 ] ; then |
| 684 |
|
$cf $testdata/testoutput18 testtry |
| 685 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 686 |
|
else exit 1 |
| 687 |
|
fi |
| 688 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 689 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 690 |
|
else echo " OK" |
| 691 |
|
fi |
| 692 |
|
done |
| 693 |
|
fi |
| 694 |
|
fi |
| 695 |
|
|
| 696 |
|
# Tests for 16-bit-specific features (Unicode property support) |
| 697 |
|
|
| 698 |
|
if [ $do19 = yes ] ; then |
| 699 |
|
echo "Test 19: specials for the 16-bit library with Unicode propery support" |
| 700 |
|
if [ "$bits" = "8" ] ; then |
| 701 |
|
echo " Skipped when running 8-bit tests" |
| 702 |
|
elif [ $ucp -eq 0 ] ; then |
| 703 |
|
echo " Skipped because Unicode property support is not available" |
| 704 |
|
else |
| 705 |
|
for opt in "" "-s" $jitopt; do |
| 706 |
|
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput19 testtry |
| 707 |
|
if [ $? = 0 ] ; then |
| 708 |
|
$cf $testdata/testoutput19 testtry |
| 709 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 710 |
|
else exit 1 |
| 711 |
|
fi |
| 712 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 713 |
|
elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| 714 |
|
else echo " OK" |
| 715 |
|
fi |
| 716 |
|
done |
| 717 |
|
fi |
| 718 |
|
fi |
| 719 |
|
|
| 720 |
|
# Tests for 16-bit-specific features in DFA non-UTF-16 mode |
| 721 |
|
|
| 722 |
|
if [ $do20 = yes ] ; then |
| 723 |
|
echo "Test 20: DFA specials for the basic 16-bit library" |
| 724 |
|
if [ "$bits" = "8" ] ; then |
| 725 |
|
echo " Skipped when running 8-bit tests" |
| 726 |
|
else |
| 727 |
|
for opt in "" "-s"; do |
| 728 |
|
$sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput20 testtry |
| 729 |
|
if [ $? = 0 ] ; then |
| 730 |
|
$cf $testdata/testoutput20 testtry |
| 731 |
|
if [ $? != 0 ] ; then exit 1; fi |
| 732 |
|
else exit 1 |
| 733 |
|
fi |
| 734 |
|
if [ "$opt" = "-s" ] ; then echo " OK with study" |
| 735 |
|
else echo " OK" |
| 736 |
|
fi |
| 737 |
|
done |
| 738 |
|
fi |
| 739 |
|
fi |
| 740 |
|
|
| 741 |
|
# End of loop for 8-bit/16-bit tests |
| 742 |
|
done |
| 743 |
|
|
| 744 |
# End |
# End |
Parent Directory
| 
Revision Log
| 
Patch