/[pcre]/code/trunk/RunTest
ViewVC logotype

Diff of /code/trunk/RunTest

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

code/trunk/RunTest.in revision 49 by nigel, Sat Feb 24 21:39:33 2007 UTC code/trunk/RunTest revision 708 by ph10, Fri Sep 23 11:03:03 2011 UTC
# Line 1  Line 1 
1  #! /bin/sh  #! /bin/sh
2    
3  # This file is generated by configure from RunTest.in. Make any changes  # Run the PCRE tests using the pcretest program. The appropriate tests are
4  # to that file.  # selected, depending on which build-time options were used.
5    
6  # Run PCRE tests  # All tests are now run both with and without -s, to ensure that everything is
7    # tested with and without studying. However, there are some tests that produce
8    # different output after studying, typically when we are tracing the actual
9    # matching process (for example, using auto-callouts). In these few cases, the
10    # tests are duplicated in the files, one with /S to force studying always, and
11    # one with /SS to force *not* studying always. The use of -s doesn't then make
12    # any difference to their output. There is also one test which compiles invalid
13    # UTF-8 with the UTF-8 check turned off; for this, studying must also be
14    # disabled with /SS.
15    
16    # When JIT support is available, all the tests are also run with -s+ to test
17    # (again, almost) everything with studying and the JIT option. There are also
18    # two tests for JIT-specific features, one to be run when JIT support is
19    # available, and one when it is not.
20    
21    # The arguments for this script can be individual test numbers, or the word
22    # "valgrind", or "sim" followed by an argument to run cross-compiled
23    # executables under a simulator, for example:
24    #
25    # RunTest 3 sim "qemu-arm -s 8388608"
26    
27  cf=diff  valgrind=
28    sim=
29    
30  # Select which tests to run; if no selection, run all  # Select which tests to run; for those that are explicitly requested, check
31    # that the necessary optional facilities are available.
32    
33  do1=no  do1=no
34  do2=no  do2=no
# Line 15  do3=no Line 36  do3=no
36  do4=no  do4=no
37  do5=no  do5=no
38  do6=no  do6=no
39    do7=no
40    do8=no
41    do9=no
42    do10=no
43    do11=no
44    do12=no
45    do13=no
46    do14=no
47    do15=no
48    
49  while [ $# -gt 0 ] ; do  while [ $# -gt 0 ] ; do
50    case $1 in    case $1 in
# Line 22  while [ $# -gt 0 ] ; do Line 52  while [ $# -gt 0 ] ; do
52      2) do2=yes;;      2) do2=yes;;
53      3) do3=yes;;      3) do3=yes;;
54      4) do4=yes;;      4) do4=yes;;
55      5) do5=yes;;      5) do5=yes;;
56      6) do6=yes;;      6) do6=yes;;
57        7) do7=yes;;
58        8) do8=yes;;
59        9) do9=yes;;
60       10) do10=yes;;
61       11) do11=yes;;
62       12) do12=yes;;
63       13) do13=yes;;
64       14) do14=yes;;
65       15) do15=yes;;
66       valgrind) valgrind="valgrind -q --smc-check=all";;
67       sim) shift; sim=$1;;
68      *) echo "Unknown test number $1"; exit 1;;      *) echo "Unknown test number $1"; exit 1;;
69    esac    esac
70    shift    shift
71  done  done
72    
73  if [ "@UTF8@" = "" ] ; then  # Set up a suitable "diff" command for comparison. Some systems
74    # have a diff that lacks a -u option. Try to deal with this.
75    
76    if diff -u /dev/null /dev/null; then cf="diff -u"; else cf="diff"; fi
77    
78    # Find the test data
79    
80    if [ -n "$srcdir" -a -d "$srcdir" ] ; then
81      testdata="$srcdir/testdata"
82    elif [ -d "./testdata" ] ; then
83      testdata=./testdata
84    elif [ -d "../testdata" ] ; then
85      testdata=../testdata
86    else
87      echo "Cannot find the testdata directory"
88      exit 1
89    fi
90    
91    # Find which optional facilities are available
92    
93    case `$sim ./pcretest -C | $sim ./pcregrep 'Internal link size'` in
94      *2) link_size=2;;
95      *3) link_size=3;;
96      *4) link_size=4;;
97       *) echo "Failed to find internal link size"; exit 1;;
98    esac
99    
100    $sim ./pcretest -C | $sim ./pcregrep 'No UTF-8 support' >/dev/null
101    utf8=$?
102    
103    $sim ./pcretest -C | $sim ./pcregrep 'No Unicode properties support' >/dev/null
104    ucp=$?
105    
106    jitopt=
107    $sim ./pcretest -C | $sim ./pcregrep 'No just-in-time compiler support' \
108      >/dev/null
109    jit=$?
110    if [ $jit -ne 0 ] ; then
111      jitopt=-s+
112    fi
113    
114    if [ $utf8 -eq 0 ] ; then
115      if [ $do4 = yes ] ; then
116        echo "Can't run test 4 because UTF-8 support is not configured"
117        exit 1
118      fi
119    if [ $do5 = yes ] ; then    if [ $do5 = yes ] ; then
120      echo "Can't run test 5 because UFT8 support is not configured"      echo "Can't run test 5 because UTF-8 support is not configured"
121        exit 1
122      fi
123      if [ $do8 = yes ] ; then
124        echo "Can't run test 8 because UTF-8 support is not configured"
125        exit 1
126      fi
127      if [ $do12 = yes ] ; then
128        echo "Can't run test 12 because UTF-8 support is not configured"
129      exit 1      exit 1
130    fi    fi
131    fi
132    
133    if [ $ucp -eq 0 ] ; then
134    if [ $do6 = yes ] ; then    if [ $do6 = yes ] ; then
135      echo "Can't run test 6 because UFT8 support is not configured"      echo "Can't run test 6 because Unicode property support is not configured"
136        exit 1
137      fi
138      if [ $do9 = yes ] ; then
139        echo "Can't run test 9 because Unicode property support is not configured"
140        exit 1
141      fi
142      if [ $do10 = yes ] ; then
143        echo "Can't run test 10 because Unicode property support is not configured"
144        exit 1
145      fi
146      if [ $do13 = yes ] ; then
147        echo "Can't run test 12 because Unicode property support is not configured"
148        exit 1
149      fi
150    fi
151    
152    if [ $link_size -ne 2 ] ; then
153      if [ $do10 = yes ] ; then
154        echo "Can't run test 10 because the link size ($link_size) is not 2"
155        exit 1
156      fi
157    fi
158    
159    if [ $jit -eq 0 ] ; then
160      if [ $do14 = "yes" ] ; then
161        echo "Can't run test 14 because JIT support is not configured"
162      exit 1      exit 1
163    fi    fi
164  fi  else
165      if [ $do15 = "yes" ] ; then
166        echo "Can't run test 15 because JIT support is configured"
167        exit 1
168      fi
169    fi
170    
171  if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a\  # If no specific tests were requested, select all. Those that are not
172       $do5 = no -a $do6 = no ] ; then  # relevant will be skipped.
173    
174    if [ $do1  = no -a $do2  = no -a $do3  = no -a $do4  = no -a \
175         $do5  = no -a $do6  = no -a $do7  = no -a $do8  = no -a \
176         $do9  = no -a $do10 = no -a $do11 = no -a $do12 = no -a \
177         $do13 = no -a $do14 = no -a $do15 = no ] ; then
178    do1=yes    do1=yes
179    do2=yes    do2=yes
180    do3=yes    do3=yes
181    do4=yes    do4=yes
182    if [ "@UTF8@" != "" ] ; then do5=yes; fi    do5=yes
183    if [ "@UTF8@" != "" ] ; then do6=yes; fi    do6=yes
184      do7=yes
185      do8=yes
186      do9=yes
187      do10=yes
188      do11=yes
189      do12=yes
190      do13=yes
191      do14=yes
192      do15=yes
193  fi  fi
194    
195  # Primary test, Perl-compatible  # Show which release and which test data
196    
197    echo ""
198    echo PCRE C library tests using test data from $testdata
199    $sim ./pcretest /dev/null
200    
201    # Primary test, compatible with JIT and all versions of Perl >= 5.8
202    
203  if [ $do1 = yes ] ; then  if [ $do1 = yes ] ; then
204    echo "Testing main functionality (Perl compatible)"    echo "Test 1: main functionality (Compatible with Perl >= 5.8)"
205    ./pcretest testdata/testinput1 testtry    for opt in "" "-s" $jitopt; do
206    if [ $? = 0 ] ; then      $sim $valgrind ./pcretest -q $opt $testdata/testinput1 testtry
207      $cf testtry testdata/testoutput1      if [ $? = 0 ] ; then
208      if [ $? != 0 ] ; then exit 1; fi        $cf $testdata/testoutput1 testtry
209    else exit 1        if [ $? != 0 ] ; then exit 1; fi
210    fi      else exit 1
211        fi
212        if [ "$opt" = "-s" ] ; then echo "  OK with study"
213        elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
214        else echo "  OK"
215        fi
216      done
217  fi  fi
218    
219  # PCRE tests that are not Perl-compatible - API & error tests, mostly  # PCRE tests that are not JIT or Perl-compatible: API, errors, internals
220    
221  if [ $do2 = yes ] ; then  if [ $do2 = yes ] ; then
222    echo "Testing API and error handling (not Perl compatible)"    echo "Test 2: API, errors, internals, and non-Perl stuff"
223    ./pcretest -i testdata/testinput2 testtry    for opt in "" "-s" $jitopt; do
224    if [ $? = 0 ] ; then      $sim $valgrind ./pcretest -q $opt $testdata/testinput2 testtry
225      $cf testtry testdata/testoutput2      if [ $? = 0 ] ; then
226      if [ $? != 0 ] ; then exit 1; fi        $cf $testdata/testoutput2 testtry
227    else exit 1        if [ $? != 0 ] ; then exit 1; fi
228    fi      else
229          echo " "
230          echo "** Test 2 requires a lot of stack. If it has crashed with a"
231          echo "** segmentation fault, it may be that you do not have enough"
232          echo "** stack available by default. Please see the 'pcrestack' man"
233          echo "** page for a discussion of PCRE's stack usage."
234          echo " "
235          exit 1
236        fi
237        if [ "$opt" = "-s" ] ; then echo "  OK with study"
238        elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
239        else echo "  OK"
240        fi
241      done
242  fi  fi
243    
244  # Additional Perl-compatible tests for Perl 5.005's new features  # Locale-specific tests, provided that either the "fr_FR" or the "french"
245    # locale is available. The former is the Unix-like standard; the latter is
246    # for Windows. Another possibility is "fr", which needs to be run against
247    # the Windows-specific input and output files.
248    
249  if [ $do3 = yes ] ; then  if [ $do3 = yes ] ; then
250    echo "Testing Perl 5.005 features (Perl 5.005 compatible)"    locale -a | grep '^fr_FR$' >/dev/null
251    ./pcretest testdata/testinput3 testtry    if [ $? -eq 0 ] ; then
252    if [ $? = 0 ] ; then      locale=fr_FR
253      $cf testtry testdata/testoutput3      infile=$testdata/testinput3
254      if [ $? != 0 ] ; then exit 1; fi      outfile=$testdata/testoutput3
255    else exit 1    else
256        infile=test3input
257        outfile=test3output
258        locale -a | grep '^french$' >/dev/null
259        if [ $? -eq 0 ] ; then
260          locale=french
261          sed 's/fr_FR/french/' $testdata/testinput3 >test3input
262          sed 's/fr_FR/french/' $testdata/testoutput3 >test3output
263        else
264          locale -a | grep '^fr$' >/dev/null
265          if [ $? -eq 0 ] ; then
266            locale=fr
267            sed 's/fr_FR/fr/' $testdata/wintestinput3 >test3input
268            sed 's/fr_FR/fr/' $testdata/wintestoutput3 >test3output
269          else
270            locale=
271          fi
272        fi
273    fi    fi
 fi  
274    
275  if [ $do1 = yes -a $do2 = yes -a $do3 = yes ] ; then    if [ "$locale" != "" ] ; then
276    echo " "      echo "Test 3: locale-specific features (using '$locale' locale)"
277    echo "The three main tests all ran OK"      for opt in "" "-s" $jitopt; do
278    echo " "        $sim $valgrind ./pcretest -q $opt $infile testtry
279          if [ $? = 0 ] ; then
280            $cf $outfile testtry
281            if [ $? != 0 ] ; then
282              echo " "
283              echo "Locale test did not run entirely successfully."
284              echo "This usually means that there is a problem with the locale"
285              echo "settings rather than a bug in PCRE."
286              break;
287            else
288              if [ "$opt" = "-s" ] ; then echo "  OK with study"
289              elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
290              else echo "  OK"
291              fi
292            fi
293          else exit 1
294          fi
295        done
296      else
297        echo "Cannot test locale-specific features - neither the 'fr_FR' nor the"
298        echo "'french' locale exists, or the \"locale\" command is not available"
299        echo "to check for them."
300        echo " "
301      fi
302  fi  fi
303    
304  # Locale-specific tests, provided the "fr" locale is available  # Additional tests for UTF8 support
305    
306  if [ $do4 = yes ] ; then  if [ $do4 = yes ] ; then
307    locale -a | grep '^fr$' >/dev/null    echo "Test 4: UTF-8 support (Compatible with Perl >= 5.8)"
308    if [ $? -eq 0 ] ; then    if [ $utf8 -eq 0 ] ; then
309      echo "Testing locale-specific features (using 'fr' locale)"      echo "  Skipped because UTF-8 support is not available"
310      ./pcretest testdata/testinput4 testtry    else
311        for opt in "" "-s" $jitopt; do
312          $sim $valgrind ./pcretest -q $opt $testdata/testinput4 testtry
313          if [ $? = 0 ] ; then
314            $cf $testdata/testoutput4 testtry
315            if [ $? != 0 ] ; then exit 1; fi
316          else exit 1
317          fi
318          if [ "$opt" = "-s" ] ; then echo "  OK with study"
319          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
320          else echo "  OK"
321          fi
322        done
323      fi
324    fi
325    
326    if [ $do5 = yes ] ; then
327      echo "Test 5: API, internals, and non-Perl stuff for UTF-8 support"
328      if [ $utf8 -eq 0 ] ; then
329        echo "  Skipped because UTF-8 support is not available"
330      else
331        for opt in "" "-s" $jitopt; do
332          $sim $valgrind ./pcretest -q $opt $testdata/testinput5 testtry
333          if [ $? = 0 ] ; then
334            $cf $testdata/testoutput5 testtry
335            if [ $? != 0 ] ; then exit 1; fi
336          else exit 1
337          fi
338          if [ "$opt" = "-s" ] ; then echo "  OK with study"
339          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
340          else echo "  OK"
341          fi
342        done
343      fi
344    fi
345    
346    if [ $do6 = yes ] ; then
347      echo "Test 6: Unicode property support (Compatible with Perl >= 5.10)"
348      if [ $utf8 -eq 0 -o $ucp -eq 0 ] ; then
349        echo "  Skipped because Unicode property support is not available"
350      else
351        for opt in "" "-s" $jitopt; do
352          $sim $valgrind ./pcretest -q $opt $testdata/testinput6 testtry
353          if [ $? = 0 ] ; then
354            $cf $testdata/testoutput6 testtry
355            if [ $? != 0 ] ; then exit 1; fi
356          else exit 1
357          fi
358          if [ "$opt" = "-s" ] ; then echo "  OK with study"
359          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
360          else echo "  OK"
361          fi
362        done
363      fi
364    fi
365    
366    # Tests for DFA matching support
367    
368    if [ $do7 = yes ] ; then
369      echo "Test 7: DFA matching"
370      for opt in "" "-s"; do
371        $sim $valgrind ./pcretest -q $opt -dfa $testdata/testinput7 testtry
372      if [ $? = 0 ] ; then      if [ $? = 0 ] ; then
373        $cf testtry testdata/testoutput4        $cf $testdata/testoutput7 testtry
374        if [ $? != 0 ] ; then        if [ $? != 0 ] ; then exit 1; fi
         echo " "  
         echo "Locale test did not run entirely successfully."  
         echo "This usually means that there is a problem with the locale"  
         echo "settings rather than a bug in PCRE."  
       else  
       echo "Locale test ran OK"  
       fi  
       echo " "  
375      else exit 1      else exit 1
376      fi      fi
377        if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
378      done
379    fi
380    
381    if [ $do8 = yes ] ; then
382      echo "Test 8: DFA matching with UTF-8"
383      if [ $utf8 -eq 0 ] ; then
384        echo "  Skipped because UTF-8 support is not available"
385    else    else
386      echo "Cannot test locale-specific features - 'fr' locale not found,"      for opt in "" "-s"; do
387      echo "or the \"locale\" command is not available to check for it."        $sim $valgrind ./pcretest -q $opt -dfa $testdata/testinput8 testtry
388      echo " "        if [ $? = 0 ] ; then
389            $cf $testdata/testoutput8 testtry
390            if [ $? != 0 ] ; then exit 1; fi
391          else exit 1
392          fi
393          if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
394        done
395    fi    fi
396  fi  fi
397    
398  # Additional tests for UTF8 support  if [ $do9 = yes ] ; then
399      echo "Test 9: DFA matching with Unicode properties"
400      if [ $utf8 -eq 0 -o $ucp -eq 0 ] ; then
401        echo "  Skipped because Unicode property support is not available"
402      else
403        for opt in "" "-s"; do
404          $sim $valgrind ./pcretest -q $opt -dfa $testdata/testinput9 testtry
405          if [ $? = 0 ] ; then
406            $cf $testdata/testoutput9 testtry
407            if [ $? != 0 ] ; then exit 1; fi
408          else exit 1
409          fi
410          if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
411        done
412      fi
413    fi
414    
415  if [ $do5 = yes ] ; then  # Test of internal offsets and code sizes. This test is run only when there
416    echo "Testing experimental, incomplete UTF8 support (Perl compatible)"  # is Unicode property support and the link size is 2. The actual tests are
417    ./pcretest testdata/testinput5 testtry  # mostly the same as in some of the above, but in this test we inspect some
418    if [ $? = 0 ] ; then  # offsets and sizes that require a known link size. This is a doublecheck for
419      $cf testtry testdata/testoutput5  # the maintainer, just in case something changes unexpectely.
420      if [ $? != 0 ] ; then exit 1; fi  
421    else exit 1  if [ $do10 = yes ] ; then
422      echo "Test 10: Internal offsets and code size tests"
423      if [ $link_size -ne 2 ] ; then
424        echo "  Skipped because link size is not 2"
425      elif [ $ucp -eq 0 ] ; then
426        echo "  Skipped because Unicode property support is not available"
427      else
428        for opt in "" "-s"; do
429          $sim $valgrind ./pcretest -q $opt $testdata/testinput10 testtry
430          if [ $? = 0 ] ; then
431            $cf $testdata/testoutput10 testtry
432            if [ $? != 0 ] ; then exit 1; fi
433          else exit 1
434          fi
435          if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
436        done
437    fi    fi
   echo "UTF8 test ran OK"  
   echo " "  
438  fi  fi
439    
440  if [ $do6 = yes ] ; then  # Test of Perl >= 5.10 features without UTF8 support
441    echo "Testing API and internals for UTF8 support (not Perl compatible)"  
442    ./pcretest testdata/testinput6 testtry  if [ $do11 = yes ] ; then
443    if [ $? = 0 ] ; then    echo "Test 11: Features from Perl >= 5.10 without UTF8 support"
444      $cf testtry testdata/testoutput6    for opt in "" "-s" $jitopt; do
445      if [ $? != 0 ] ; then exit 1; fi      $sim $valgrind ./pcretest -q $opt $testdata/testinput11 testtry
446    else exit 1      if [ $? = 0 ] ; then
447          $cf $testdata/testoutput11 testtry
448          if [ $? != 0 ] ; then exit 1; fi
449        else exit 1
450        fi
451        if [ "$opt" = "-s" ] ; then echo "  OK with study"
452        elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
453        else echo "  OK"
454        fi
455      done
456    fi
457    
458    # Test of Perl >= 5.10 features with UTF8 support
459    
460    if [ $do12 = yes ] ; then
461      echo "Test 12: Features from Perl >= 5.10 with UTF8 support"
462      if [ $utf8 -eq 0 ] ; then
463        echo "  Skipped because UTF-8 support is not available"
464      else
465        for opt in "" "-s" $jitopt; do
466          $sim $valgrind ./pcretest -q $opt $testdata/testinput12 testtry
467          if [ $? = 0 ] ; then
468            $cf $testdata/testoutput12 testtry
469            if [ $? != 0 ] ; then exit 1; fi
470          else exit 1
471          fi
472          if [ "$opt" = "-s" ] ; then echo "  OK with study"
473          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
474          else echo "  OK"
475          fi
476        done
477      fi
478    fi
479    
480    # Test non-Perl-compatible Unicode property support
481    
482    if [ $do13 = yes ] ; then
483      echo "Test 13: API, internals, and non-Perl stuff for Unicode property support"
484      if [ $utf8 -eq 0 -o $ucp -eq 0 ] ; then
485        echo "  Skipped because Unicode property support is not available"
486      else
487        for opt in "" "-s" $jitopt; do
488          $sim $valgrind ./pcretest -q $opt $testdata/testinput13 testtry
489          if [ $? = 0 ] ; then
490            $cf $testdata/testoutput13 testtry
491            if [ $? != 0 ] ; then exit 1; fi
492          else exit 1
493          fi
494          if [ "$opt" = "-s" ] ; then echo "  OK with study"
495          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
496          else echo "  OK"
497          fi
498        done
499      fi
500    fi
501    
502    # Test JIT-specific features when JIT is available
503    
504    if [ $do14 = yes ] ; then
505      echo "Test 14: JIT-specific features (JIT available)"
506      if [ $jit -eq 0 ] ; then
507        echo "  Skipped because JIT is not available or not usable"
508      else
509        $sim $valgrind ./pcretest -q $testdata/testinput14 testtry
510        if [ $? = 0 ] ; then
511          $cf $testdata/testoutput14 testtry
512          if [ $? != 0 ] ; then exit 1; fi
513        else exit 1
514        fi
515        echo "  OK"
516      fi
517    fi
518    
519    # Test JIT-specific features when JIT is not available
520    
521    if [ $do15 = yes ] ; then
522      echo "Test 15: JIT-specific features (JIT not available)"
523      if [ $jit -ne 0 ] ; then
524        echo "  Skipped because JIT is available"
525      else
526        $sim $valgrind ./pcretest -q $testdata/testinput15 testtry
527        if [ $? = 0 ] ; then
528          $cf $testdata/testoutput15 testtry
529          if [ $? != 0 ] ; then exit 1; fi
530        else exit 1
531        fi
532        echo "  OK"
533    fi    fi
   echo "UTF8 internals test ran OK"  
   echo " "  
534  fi  fi
535    
536  # End  # End

Legend:
Removed from v.49  
changed lines
  Added in v.708

  ViewVC Help
Powered by ViewVC 1.1.5