/[pcre]/code/trunk/doc/pcre.txt
ViewVC logotype

Diff of /code/trunk/doc/pcre.txt

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 69 by nigel, Sat Feb 24 21:40:18 2007 UTC revision 148 by ph10, Mon Apr 16 13:25:10 2007 UTC
# Line 1  Line 1 
1    -----------------------------------------------------------------------------
2  This file contains a concatenation of the PCRE man pages, converted to plain  This file contains a concatenation of the PCRE man pages, converted to plain
3  text format for ease of searching with a text editor, or for use on systems  text format for ease of searching with a text editor, or for use on systems
4  that do not have a man page processor. The small individual files that give  that do not have a man page processor. The small individual files that give
# Line 5  synopses of each function in the library Line 6  synopses of each function in the library
6  separate text files for the pcregrep and pcretest commands.  separate text files for the pcregrep and pcretest commands.
7  -----------------------------------------------------------------------------  -----------------------------------------------------------------------------
8    
9    
10    PCRE(3)                                                                PCRE(3)
11    
12    
13  NAME  NAME
14       PCRE - Perl-compatible regular expressions         PCRE - Perl-compatible regular expressions
15    
16    
17  DESCRIPTION  INTRODUCTION
18    
19       The PCRE library is a set of functions that implement  regu-         The  PCRE  library is a set of functions that implement regular expres-
20       lar  expression  pattern  matching using the same syntax and         sion pattern matching using the same syntax and semantics as Perl, with
21       semantics as Perl, with just a few differences. The  current         just  a  few differences. (Certain features that appeared in Python and
22       implementation  of  PCRE  (release 4.x) corresponds approxi-         PCRE before they appeared in Perl are also available using  the  Python
23       mately with Perl 5.8, including support  for  UTF-8  encoded         syntax.)
24       strings.    However,  this  support  has  to  be  explicitly  
25       enabled; it is not the default.         The  current  implementation of PCRE (release 7.x) corresponds approxi-
26           mately with Perl 5.10, including support for UTF-8 encoded strings  and
27       PCRE is written in C and released as a C library. However, a         Unicode general category properties. However, UTF-8 and Unicode support
28       number  of  people  have  written wrappers and interfaces of         has to be explicitly enabled; it is not the default. The Unicode tables
29       various kinds. A C++ class is included  in  these  contribu-         correspond to Unicode release 5.0.0.
30       tions,  which  can  be found in the Contrib directory at the  
31       primary FTP site, which is:         In  addition to the Perl-compatible matching function, PCRE contains an
32           alternative matching function that matches the same  compiled  patterns
33       ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre         in  a different way. In certain circumstances, the alternative function
34           has some advantages. For a discussion of the two  matching  algorithms,
35       Details of exactly which Perl  regular  expression  features         see the pcrematching page.
36       are  and  are  not  supported  by PCRE are given in separate  
37       documents. See the pcrepattern and pcrecompat pages.         PCRE  is  written  in C and released as a C library. A number of people
38           have written wrappers and interfaces of various kinds.  In  particular,
39       Some features of PCRE can be included, excluded, or  changed         Google  Inc.   have  provided  a comprehensive C++ wrapper. This is now
40       when  the library is built. The pcre_config() function makes         included as part of the PCRE distribution. The pcrecpp page has details
41       it possible for a client  to  discover  which  features  are         of  this  interface.  Other  people's contributions can be found in the
42       available.  Documentation  about  building  PCRE for various         Contrib directory at the primary FTP site, which is:
43       operating systems can be found in the  README  file  in  the  
44       source distribution.         ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre
45    
46           Details of exactly which Perl regular expression features are  and  are
47           not supported by PCRE are given in separate documents. See the pcrepat-
48           tern and pcrecompat pages.
49    
50           Some features of PCRE can be included, excluded, or  changed  when  the
51           library  is  built.  The pcre_config() function makes it possible for a
52           client to discover which features are  available.  The  features  them-
53           selves  are described in the pcrebuild page. Documentation about build-
54           ing PCRE for various operating systems can be found in the README  file
55           in the source distribution.
56    
57           The  library  contains  a number of undocumented internal functions and
58           data tables that are used by more than one  of  the  exported  external
59           functions,  but  which  are  not  intended for use by external callers.
60           Their names all begin with "_pcre_", which hopefully will  not  provoke
61           any name clashes. In some environments, it is possible to control which
62           external symbols are exported when a shared library is  built,  and  in
63           these cases the undocumented symbols are not exported.
64    
65    
66  USER DOCUMENTATION  USER DOCUMENTATION
67    
68       The user documentation for PCRE has been  split  up  into  a         The  user  documentation  for PCRE comprises a number of different sec-
69       number  of  different sections. In the "man" format, each of         tions. In the "man" format, each of these is a separate "man page".  In
70       these is a separate "man page". In the HTML format, each  is         the  HTML  format, each is a separate page, linked from the index page.
71       a  separate  page,  linked from the index page. In the plain         In the plain text format, all the sections are concatenated,  for  ease
72       text format, all the sections are concatenated, for ease  of         of searching. The sections are as follows:
73       searching. The sections are as follows:  
74             pcre              this document
75         pcre              this document           pcreapi           details of PCRE's native C API
76         pcreapi           details of PCRE's native API           pcrebuild         options for building PCRE
77         pcrebuild         options for building PCRE           pcrecallout       details of the callout feature
78         pcrecallout       details of the callout feature           pcrecompat        discussion of Perl compatibility
79         pcrecompat        discussion of Perl compatibility           pcrecpp           details of the C++ wrapper
80         pcregrep          description of the pcregrep command           pcregrep          description of the pcregrep command
81         pcrepattern       syntax and semantics of supported           pcrematching      discussion of the two matching algorithms
82                             regular expressions           pcrepartial       details of the partial matching facility
83         pcreperform       discussion of performance issues           pcrepattern       syntax and semantics of supported
84         pcreposix         the POSIX-compatible API                               regular expressions
85         pcresample        discussion of the sample program           pcreperform       discussion of performance issues
86         pcretest          the pcretest testing command           pcreposix         the POSIX-compatible C API
87             pcreprecompile    details of saving and re-using precompiled patterns
88       In addition, in the "man" and HTML formats, there is a short           pcresample        discussion of the sample program
89       page  for  each  library function, listing its arguments and           pcrestack         discussion of stack usage
90       results.           pcretest          description of the pcretest testing command
91    
92           In addition, in the "man" and HTML formats, there is a short  page  for
93           each C library function, listing its arguments and results.
94    
95    
96  LIMITATIONS  LIMITATIONS
97    
98       There are some size limitations in PCRE but it is hoped that         There  are some size limitations in PCRE but it is hoped that they will
99       they will never in practice be relevant.         never in practice be relevant.
100    
101       The maximum length of a  compiled  pattern  is  65539  (sic)         The maximum length of a compiled pattern is 65539 (sic) bytes  if  PCRE
102       bytes  if PCRE is compiled with the default internal linkage         is compiled with the default internal linkage size of 2. If you want to
103       size of 2. If you want to process regular  expressions  that         process regular expressions that are truly enormous,  you  can  compile
104       are  truly  enormous,  you can compile PCRE with an internal         PCRE  with  an  internal linkage size of 3 or 4 (see the README file in
105       linkage size of 3 or 4 (see the README file  in  the  source         the source distribution and the pcrebuild documentation  for  details).
106       distribution  and  the pcrebuild documentation for details).         In  these  cases the limit is substantially larger.  However, the speed
107       If these cases the limit is substantially larger.   However,         of execution is slower.
108       the speed of execution will be slower.  
109           All values in repeating quantifiers must be less than 65536. The  maxi-
110       All values in repeating quantifiers must be less than 65536.         mum  compiled  length  of  subpattern  with an explicit repeat count is
111       The maximum number of capturing subpatterns is 65535.         30000 bytes. The maximum number of capturing subpatterns is 65535.
112    
113       There is no limit to the  number  of  non-capturing  subpat-         There is no limit to the number of parenthesized subpatterns, but there
114       terns,  but  the  maximum  depth  of nesting of all kinds of         can be no more than 65535 capturing subpatterns.
115       parenthesized subpattern, including  capturing  subpatterns,  
116       assertions, and other types of subpattern, is 200.         The maximum length of name for a named subpattern is 32 characters, and
117           the maximum number of named subpatterns is 10000.
118       The maximum length of a subject string is the largest  posi-  
119       tive number that an integer variable can hold. However, PCRE         The maximum length of a subject string is the largest  positive  number
120       uses recursion to handle subpatterns and indefinite  repeti-         that  an integer variable can hold. However, when using the traditional
121       tion.  This  means  that the available stack space may limit         matching function, PCRE uses recursion to handle subpatterns and indef-
122       the size of a subject string that can be processed  by  cer-         inite  repetition.  This means that the available stack space may limit
123       tain patterns.         the size of a subject string that can be processed by certain patterns.
124           For a discussion of stack issues, see the pcrestack documentation.
125    
126    
127    UTF-8 AND UNICODE PROPERTY SUPPORT
128    
129           From  release  3.3,  PCRE  has  had  some support for character strings
130           encoded in the UTF-8 format. For release 4.0 this was greatly  extended
131           to  cover  most common requirements, and in release 5.0 additional sup-
132           port for Unicode general category properties was added.
133    
134           In order process UTF-8 strings, you must build PCRE  to  include  UTF-8
135           support  in  the  code,  and, in addition, you must call pcre_compile()
136           with the PCRE_UTF8 option flag. When you do this, both the pattern  and
137           any  subject  strings  that are matched against it are treated as UTF-8
138           strings instead of just strings of bytes.
139    
140           If you compile PCRE with UTF-8 support, but do not use it at run  time,
141           the  library will be a bit bigger, but the additional run time overhead
142           is limited to testing the PCRE_UTF8 flag occasionally, so should not be
143           very big.
144    
145           If PCRE is built with Unicode character property support (which implies
146           UTF-8 support), the escape sequences \p{..}, \P{..}, and  \X  are  sup-
147           ported.  The available properties that can be tested are limited to the
148           general category properties such as Lu for an upper case letter  or  Nd
149           for  a  decimal number, the Unicode script names such as Arabic or Han,
150           and the derived properties Any and L&. A full  list  is  given  in  the
151           pcrepattern documentation. Only the short names for properties are sup-
152           ported. For example, \p{L} matches a letter. Its Perl synonym,  \p{Let-
153           ter},  is  not  supported.   Furthermore,  in Perl, many properties may
154           optionally be prefixed by "Is", for compatibility with Perl  5.6.  PCRE
155           does not support this.
156    
157           The following comments apply when PCRE is running in UTF-8 mode:
158    
159           1.  When you set the PCRE_UTF8 flag, the strings passed as patterns and
160           subjects are checked for validity on entry to the  relevant  functions.
161           If an invalid UTF-8 string is passed, an error return is given. In some
162           situations, you may already know  that  your  strings  are  valid,  and
163           therefore want to skip these checks in order to improve performance. If
164           you set the PCRE_NO_UTF8_CHECK flag at compile time  or  at  run  time,
165           PCRE  assumes  that  the  pattern or subject it is given (respectively)
166           contains only valid UTF-8 codes. In this case, it does not diagnose  an
167           invalid  UTF-8 string. If you pass an invalid UTF-8 string to PCRE when
168           PCRE_NO_UTF8_CHECK is set, the results are undefined. Your program  may
169           crash.
170    
171           2.  An  unbraced  hexadecimal  escape sequence (such as \xb3) matches a
172           two-byte UTF-8 character if the value is greater than 127.
173    
174           3. Octal numbers up to \777 are recognized, and  match  two-byte  UTF-8
175           characters for values greater than \177.
176    
177           4.  Repeat quantifiers apply to complete UTF-8 characters, not to indi-
178           vidual bytes, for example: \x{100}{3}.
179    
180           5. The dot metacharacter matches one UTF-8 character instead of a  sin-
181           gle byte.
182    
183           6.  The  escape sequence \C can be used to match a single byte in UTF-8
184           mode, but its use can lead to some strange effects.  This  facility  is
185           not available in the alternative matching function, pcre_dfa_exec().
186    
187           7.  The  character escapes \b, \B, \d, \D, \s, \S, \w, and \W correctly
188           test characters of any code value, but the characters that PCRE  recog-
189           nizes  as  digits,  spaces,  or  word characters remain the same set as
190           before, all with values less than 256. This remains true even when PCRE
191           includes  Unicode  property support, because to do otherwise would slow
192           down PCRE in many common cases. If you really want to test for a  wider
193           sense  of,  say,  "digit",  you must use Unicode property tests such as
194           \p{Nd}.
195    
196           8. Similarly, characters that match the POSIX named  character  classes
197           are all low-valued characters.
198    
199           9.  Case-insensitive  matching  applies only to characters whose values
200           are less than 128, unless PCRE is built with Unicode property  support.
201           Even  when  Unicode  property support is available, PCRE still uses its
202           own character tables when checking the case of  low-valued  characters,
203           so  as not to degrade performance.  The Unicode property information is
204           used only for characters with higher values. Even when Unicode property
205           support is available, PCRE supports case-insensitive matching only when
206           there is a one-to-one mapping between a letter's  cases.  There  are  a
207           small  number  of  many-to-one  mappings in Unicode; these are not sup-
208           ported by PCRE.
209    
210    
211  UTF-8 SUPPORT  AUTHOR
212    
213       Starting at release 3.3, PCRE has had some support for char-         Philip Hazel
214       acter  strings  encoded in the UTF-8 format. For release 4.0         University Computing Service
215       this has been greatly extended to cover most common require-         Cambridge CB2 3QH, England.
      ments.  
   
      In order process UTF-8  strings,  you  must  build  PCRE  to  
      include  UTF-8  support  in  the code, and, in addition, you  
      must call pcre_compile() with  the  PCRE_UTF8  option  flag.  
      When  you  do this, both the pattern and any subject strings  
      that are matched against it are  treated  as  UTF-8  strings  
      instead of just strings of bytes.  
   
      If you compile PCRE with UTF-8 support, but do not use it at  
      run  time,  the  library will be a bit bigger, but the addi-  
      tional run time overhead is limited to testing the PCRE_UTF8  
      flag in several places, so should not be very large.  
   
      The following comments apply when PCRE is running  in  UTF-8  
      mode:  
   
      1. PCRE assumes that the strings it is given  contain  valid  
      UTF-8  codes. It does not diagnose invalid UTF-8 strings. If  
      you pass invalid UTF-8 strings  to  PCRE,  the  results  are  
      undefined.  
   
      2. In a pattern, the escape sequence \x{...}, where the con-  
      tents  of  the  braces is a string of hexadecimal digits, is  
      interpreted as a UTF-8 character whose code  number  is  the  
      given  hexadecimal  number, for example: \x{1234}. If a non-  
      hexadecimal digit appears between the braces,  the  item  is  
      not  recognized.  This escape sequence can be used either as  
      a literal, or within a character class.  
   
      3. The original hexadecimal escape sequence, \xhh, matches a  
      two-byte UTF-8 character if the value is greater than 127.  
   
      4. Repeat quantifiers apply to  complete  UTF-8  characters,  
      not to individual bytes, for example: \x{100}{3}.  
   
      5. The dot metacharacter matches one UTF-8 character instead  
      of a single byte.  
   
      6. The escape sequence \C can be used to match a single byte  
      in UTF-8 mode, but its use can lead to some strange effects.  
   
      7. The character escapes \b, \B, \d, \D, \s, \S, \w, and  \W  
      correctly test characters of any code value, but the charac-  
      ters that PCRE recognizes as digits, spaces, or word charac-  
      ters  remain  the  same  set as before, all with values less  
      than 256.  
   
      8. Case-insensitive  matching  applies  only  to  characters  
      whose  values  are  less than 256. PCRE does not support the  
      notion of "case" for higher-valued characters.  
216    
217       9. PCRE does not support the use of Unicode tables and  pro-         Putting an actual email address here seems to have been a spam  magnet,
218       perties or the Perl escapes \p, \P, and \X.         so I've taken it away. If you want to email me, use my initial and sur-
219           name, separated by a dot, at the domain ucs.cam.ac.uk.
220    
221    
222  AUTHOR  REVISION
223    
224       Philip Hazel <ph10@cam.ac.uk>         Last updated: 06 March 2007
225       University Computing Service,         Copyright (c) 1997-2007 University of Cambridge.
226       Cambridge CB2 3QG, England.  ------------------------------------------------------------------------------
227       Phone: +44 1223 334714  
228    
229    PCREBUILD(3)                                                      PCREBUILD(3)
230    
 Last updated: 04 February 2003  
 Copyright (c) 1997-2003 University of Cambridge.  
 -----------------------------------------------------------------------------  
231    
232  NAME  NAME
233       PCRE - Perl-compatible regular expressions         PCRE - Perl-compatible regular expressions
234    
235    
236  PCRE BUILD-TIME OPTIONS  PCRE BUILD-TIME OPTIONS
237    
238       This document describes the optional features of  PCRE  that         This  document  describes  the  optional  features  of PCRE that can be
239       can  be  selected when the library is compiled. They are all         selected when the library is compiled. They are all selected, or  dese-
240       selected, or deselected, by providing options to the config-         lected, by providing options to the configure script that is run before
241       ure  script  which  is run before the make command. The com-         the make command. The complete list of  options  for  configure  (which
242       plete list of options  for  configure  (which  includes  the         includes  the  standard  ones such as the selection of the installation
243       standard  ones  such  as  the  selection of the installation         directory) can be obtained by running
244       directory) can be obtained by running  
245             ./configure --help
246         ./configure --help  
247           The following sections include  descriptions  of  options  whose  names
248       The following sections describe certain options whose  names         begin with --enable or --disable. These settings specify changes to the
249       begin  with  --enable  or  --disable. These settings specify         defaults for the configure command. Because of the way  that  configure
250       changes to the defaults for the configure  command.  Because         works,  --enable  and --disable always come in pairs, so the complemen-
251       of  the  way  that  configure  works, --enable and --disable         tary option always exists as well, but as it specifies the default,  it
252       always come in pairs, so  the  complementary  option  always         is not described.
253       exists  as  well, but as it specifies the default, it is not  
254       described.  
255    C++ SUPPORT
256    
257           By default, the configure script will search for a C++ compiler and C++
258           header files. If it finds them, it automatically builds the C++ wrapper
259           library for PCRE. You can disable this by adding
260    
261             --disable-cpp
262    
263           to the configure command.
264    
265    
266  UTF-8 SUPPORT  UTF-8 SUPPORT
267    
268       To build PCRE with support for UTF-8 character strings, add         To build PCRE with support for UTF-8 character strings, add
269    
270             --enable-utf8
271    
272           to  the  configure  command.  Of  itself, this does not make PCRE treat
273           strings as UTF-8. As well as compiling PCRE with this option, you  also
274           have  have to set the PCRE_UTF8 option when you call the pcre_compile()
275           function.
276    
277    
278    UNICODE CHARACTER PROPERTY SUPPORT
279    
280           UTF-8 support allows PCRE to process character values greater than  255
281           in  the  strings that it handles. On its own, however, it does not pro-
282           vide any facilities for accessing the properties of such characters. If
283           you  want  to  be able to use the pattern escapes \P, \p, and \X, which
284           refer to Unicode character properties, you must add
285    
286         --enable-utf8           --enable-unicode-properties
287    
288       to the configure command. Of itself, this does not make PCRE         to the configure command. This implies UTF-8 support, even if you  have
289       treat  strings as UTF-8. As well as compiling PCRE with this         not explicitly requested it.
290       option, you also have have to set the PCRE_UTF8 option  when  
291       you call the pcre_compile() function.         Including  Unicode  property  support  adds around 30K of tables to the
292           PCRE library. Only the general category properties such as  Lu  and  Nd
293           are supported. Details are given in the pcrepattern documentation.
294    
295    
296  CODE VALUE OF NEWLINE  CODE VALUE OF NEWLINE
297    
298       By default, PCRE treats character 10 (linefeed) as the  new-         By  default,  PCRE interprets character 10 (linefeed, LF) as indicating
299       line  character.  This  is  the  normal newline character on         the end of a line. This is the normal newline  character  on  Unix-like
300       Unix-like systems. You can compile PCRE to use character  13         systems. You can compile PCRE to use character 13 (carriage return, CR)
301       (carriage return) instead by adding         instead, by adding
302    
303         --enable-newline-is-cr           --enable-newline-is-cr
304    
305       to the configure command. For completeness there is  also  a         to the  configure  command.  There  is  also  a  --enable-newline-is-lf
306       --enable-newline-is-lf  option,  which  explicitly specifies         option, which explicitly specifies linefeed as the newline character.
307       linefeed as the newline character.  
308           Alternatively, you can specify that line endings are to be indicated by
309           the two character sequence CRLF. If you want this, add
310    
311             --enable-newline-is-crlf
312    
313           to the configure command. There is a fourth option, specified by
314    
315             --enable-newline-is-any
316    
317           which causes PCRE to recognize any Unicode newline sequence.
318    
319           Whatever line ending convention is selected when PCRE is built  can  be
320           overridden  when  the library functions are called. At build time it is
321           conventional to use the standard for your operating system.
322    
323    
324  BUILDING SHARED AND STATIC LIBRARIES  BUILDING SHARED AND STATIC LIBRARIES
325    
326       The PCRE building process uses libtool to build both  shared         The PCRE building process uses libtool to build both shared and  static
327       and  static  Unix libraries by default. You can suppress one         Unix  libraries by default. You can suppress one of these by adding one
328       of these by adding one of         of
329    
330         --disable-shared           --disable-shared
331         --disable-static           --disable-static
332    
333       to the configure command, as required.         to the configure command, as required.
334    
335    
336  POSIX MALLOC USAGE  POSIX MALLOC USAGE
337    
338       When PCRE is called through the  POSIX  interface  (see  the         When PCRE is called through the POSIX interface (see the pcreposix doc-
339       pcreposix  documentation),  additional  working  storage  is         umentation),  additional  working  storage  is required for holding the
340       required for holding the pointers  to  capturing  substrings         pointers to capturing substrings, because PCRE requires three  integers
341       because  PCRE requires three integers per substring, whereas         per  substring,  whereas  the POSIX interface provides only two. If the
342       the POSIX interface provides only  two.  If  the  number  of         number of expected substrings is small, the wrapper function uses space
343       expected  substrings  is  small,  the  wrapper function uses         on the stack, because this is faster than using malloc() for each call.
344       space on the stack, because this is faster than  using  mal-         The default threshold above which the stack is no longer used is 10; it
345       loc()  for  each call. The default threshold above which the         can be changed by adding a setting such as
      stack is no longer used is 10; it can be changed by adding a  
      setting such as  
346    
347         --with-posix-malloc-threshold=20           --with-posix-malloc-threshold=20
348    
349       to the configure command.         to the configure command.
350    
351    
352    HANDLING VERY LARGE PATTERNS
353    
354           Within  a  compiled  pattern,  offset values are used to point from one
355           part to another (for example, from an opening parenthesis to an  alter-
356           nation  metacharacter).  By default, two-byte values are used for these
357           offsets, leading to a maximum size for a  compiled  pattern  of  around
358           64K.  This  is sufficient to handle all but the most gigantic patterns.
359           Nevertheless, some people do want to process enormous patterns,  so  it
360           is  possible  to compile PCRE to use three-byte or four-byte offsets by
361           adding a setting such as
362    
363             --with-link-size=3
364    
365           to the configure command. The value given must be 2,  3,  or  4.  Using
366           longer  offsets slows down the operation of PCRE because it has to load
367           additional bytes when handling them.
368    
369    
370    AVOIDING EXCESSIVE STACK USAGE
371    
372           When matching with the pcre_exec() function, PCRE implements backtrack-
373           ing  by  making recursive calls to an internal function called match().
374           In environments where the size of the stack is limited,  this  can  se-
375           verely  limit  PCRE's operation. (The Unix environment does not usually
376           suffer from this problem, but it may sometimes be necessary to increase
377           the  maximum  stack size.  There is a discussion in the pcrestack docu-
378           mentation.) An alternative approach to recursion that uses memory  from
379           the  heap  to remember data, instead of using recursive function calls,
380           has been implemented to work round the problem of limited  stack  size.
381           If you want to build a version of PCRE that works this way, add
382    
383             --disable-stack-for-recursion
384    
385           to  the  configure  command. With this configuration, PCRE will use the
386           pcre_stack_malloc and pcre_stack_free variables to call memory  manage-
387           ment  functions.  Separate  functions are provided because the usage is
388           very predictable: the block sizes requested are always  the  same,  and
389           the  blocks  are always freed in reverse order. A calling program might
390           be able to implement optimized functions that perform better  than  the
391           standard  malloc()  and  free()  functions.  PCRE  runs noticeably more
392           slowly when built in this way. This option affects only the pcre_exec()
393           function; it is not relevant for the the pcre_dfa_exec() function.
394    
395    
396  LIMITING PCRE RESOURCE USAGE  LIMITING PCRE RESOURCE USAGE
397    
398       Internally, PCRE has a  function  called  match()  which  it         Internally,  PCRE has a function called match(), which it calls repeat-
399       calls  repeatedly  (possibly  recursively) when performing a         edly  (sometimes  recursively)  when  matching  a  pattern   with   the
400       matching operation. By limiting the  number  of  times  this         pcre_exec()  function.  By controlling the maximum number of times this
401       function  may  be  called,  a  limit  can  be  placed on the         function may be called during a single matching operation, a limit  can
402       resources used by a single call to  pcre_exec().  The  limit         be  placed  on  the resources used by a single call to pcre_exec(). The
403       can  be  changed  at  run  time, as described in the pcreapi         limit can be changed at run time, as described in the pcreapi  documen-
404       documentation. The default is 10 million, but  this  can  be         tation.  The default is 10 million, but this can be changed by adding a
405       changed by adding a setting such as         setting such as
406    
407         --with-match-limit=500000           --with-match-limit=500000
408    
409       to the configure command.         to  the  configure  command.  This  setting  has  no  effect   on   the
410           pcre_dfa_exec() matching function.
411    
412           In  some  environments  it is desirable to limit the depth of recursive
413           calls of match() more strictly than the total number of calls, in order
414           to  restrict  the maximum amount of stack (or heap, if --disable-stack-
415           for-recursion is specified) that is used. A second limit controls this;
416           it  defaults  to  the  value  that is set for --with-match-limit, which
417           imposes no additional constraints. However, you can set a  lower  limit
418           by adding, for example,
419    
420  HANDLING VERY LARGE PATTERNS           --with-match-limit-recursion=10000
421    
422       Within a compiled pattern, offset values are used  to  point         to  the  configure  command.  This  value can also be overridden at run
423       from  one  part  to  another  (for  example, from an opening         time.
424       parenthesis to an  alternation  metacharacter).  By  default  
425       two-byte  values  are  used  for these offsets, leading to a  
426       maximum size for a compiled pattern of around 64K.  This  is  CREATING CHARACTER TABLES AT BUILD TIME
427       sufficient  to  handle  all  but the most gigantic patterns.  
428       Nevertheless, some people do want to process  enormous  pat-         PCRE uses fixed tables for processing characters whose code values  are
429       terns,  so  it is possible to compile PCRE to use three-byte         less  than 256. By default, PCRE is built with a set of tables that are
430       or four-byte offsets by adding a setting such as         distributed in the file pcre_chartables.c.dist. These  tables  are  for
431           ASCII codes only. If you add
432         --with-link-size=3  
433             --enable-rebuild-chartables
434       to the configure command. The value given must be 2,  3,  or  
435       4.  Using  longer  offsets  slows down the operation of PCRE         to  the  configure  command, the distributed tables are no longer used.
436       because it has to load additional bytes when handling them.         Instead, a program called dftables is compiled and  run.  This  outputs
437           the source for new set of tables, created in the default locale of your
438       If you build PCRE with an increased link size, test  2  (and         C runtime system. (This method of replacing the tables does not work if
439       test 5 if you are using UTF-8) will fail. Part of the output         you  are cross compiling, because dftables is run on the local host. If
440       of these tests is a representation of the compiled  pattern,         you need to create alternative tables when cross  compiling,  you  will
441       and this changes with the link size.         have to do so "by hand".)
442    
443    
444    USING EBCDIC CODE
445    
446           PCRE  assumes  by  default that it will run in an environment where the
447           character code is ASCII (or Unicode, which is  a  superset  of  ASCII).
448           PCRE  can,  however,  be  compiled  to  run in an EBCDIC environment by
449           adding
450    
451             --enable-ebcdic
452    
453           to the configure command. This setting implies --enable-rebuild-charta-
454           bles.
455    
456    
457    SEE ALSO
458    
459           pcreapi(3), pcre_config(3).
460    
461    
462    AUTHOR
463    
464           Philip Hazel
465           University Computing Service
466           Cambridge CB2 3QH, England.
467    
468    
469    REVISION
470    
471           Last updated: 20 March 2007
472           Copyright (c) 1997-2007 University of Cambridge.
473    ------------------------------------------------------------------------------
474    
475    
476    PCREMATCHING(3)                                                PCREMATCHING(3)
477    
 Last updated: 21 January 2003  
 Copyright (c) 1997-2003 University of Cambridge.  
 -----------------------------------------------------------------------------  
478    
479  NAME  NAME
480       PCRE - Perl-compatible regular expressions         PCRE - Perl-compatible regular expressions
481    
482    
483    PCRE MATCHING ALGORITHMS
484    
485           This document describes the two different algorithms that are available
486           in PCRE for matching a compiled regular expression against a given sub-
487           ject  string.  The  "standard"  algorithm  is  the  one provided by the
488           pcre_exec() function.  This works in the same was  as  Perl's  matching
489           function, and provides a Perl-compatible matching operation.
490    
491           An  alternative  algorithm is provided by the pcre_dfa_exec() function;
492           this operates in a different way, and is not  Perl-compatible.  It  has
493           advantages  and disadvantages compared with the standard algorithm, and
494           these are described below.
495    
496           When there is only one possible way in which a given subject string can
497           match  a pattern, the two algorithms give the same answer. A difference
498           arises, however, when there are multiple possibilities. For example, if
499           the pattern
500    
501             ^<.*>
502    
503           is matched against the string
504    
505             <something> <something else> <something further>
506    
507           there are three possible answers. The standard algorithm finds only one
508           of them, whereas the alternative algorithm finds all three.
509    
510    
511    REGULAR EXPRESSIONS AS TREES
512    
513  SYNOPSIS OF PCRE API         The set of strings that are matched by a regular expression can be rep-
514           resented  as  a  tree structure. An unlimited repetition in the pattern
515           makes the tree of infinite size, but it is still a tree.  Matching  the
516           pattern  to a given subject string (from a given starting point) can be
517           thought of as a search of the tree.  There are two  ways  to  search  a
518           tree:  depth-first  and  breadth-first, and these correspond to the two
519           matching algorithms provided by PCRE.
520    
      #include <pcre.h>  
521    
522       pcre *pcre_compile(const char *pattern, int options,  THE STANDARD MATCHING ALGORITHM
           const char **errptr, int *erroffset,  
           const unsigned char *tableptr);  
523    
524       pcre_extra *pcre_study(const pcre *code, int options,         In the terminology of Jeffrey Friedl's book "Mastering Regular  Expres-
525            const char **errptr);         sions",  the  standard  algorithm  is an "NFA algorithm". It conducts a
526           depth-first search of the pattern tree. That is, it  proceeds  along  a
527           single path through the tree, checking that the subject matches what is
528           required. When there is a mismatch, the algorithm  tries  any  alterna-
529           tives  at  the  current point, and if they all fail, it backs up to the
530           previous branch point in the  tree,  and  tries  the  next  alternative
531           branch  at  that  level.  This often involves backing up (moving to the
532           left) in the subject string as well.  The  order  in  which  repetition
533           branches  are  tried  is controlled by the greedy or ungreedy nature of
534           the quantifier.
535    
536       int pcre_exec(const pcre *code, const pcre_extra *extra,         If a leaf node is reached, a matching string has  been  found,  and  at
537            const char *subject, int length, int startoffset,         that  point the algorithm stops. Thus, if there is more than one possi-
538            int options, int *ovector, int ovecsize);         ble match, this algorithm returns the first one that it finds.  Whether
539           this  is the shortest, the longest, or some intermediate length depends
540           on the way the greedy and ungreedy repetition quantifiers are specified
541           in the pattern.
542    
543       int pcre_copy_named_substring(const pcre *code,         Because  it  ends  up  with a single path through the tree, it is rela-
544            const char *subject, int *ovector,         tively straightforward for this algorithm to keep  track  of  the  sub-
545            int stringcount, const char *stringname,         strings  that  are  matched  by portions of the pattern in parentheses.
546            char *buffer, int buffersize);         This provides support for capturing parentheses and back references.
547    
      int pcre_copy_substring(const char *subject, int *ovector,  
           int stringcount, int stringnumber, char *buffer,  
           int buffersize);  
548    
549       int pcre_get_named_substring(const pcre *code,  THE ALTERNATIVE MATCHING ALGORITHM
           const char *subject, int *ovector,  
           int stringcount, const char *stringname,  
           const char **stringptr);  
550    
551       int pcre_get_stringnumber(const pcre *code,         This algorithm conducts a breadth-first search of  the  tree.  Starting
552            const char *name);         from  the  first  matching  point  in the subject, it scans the subject
553           string from left to right, once, character by character, and as it does
554           this,  it remembers all the paths through the tree that represent valid
555           matches. In Friedl's terminology, this is a kind  of  "DFA  algorithm",
556           though  it is not implemented as a traditional finite state machine (it
557           keeps multiple states active simultaneously).
558    
559       int pcre_get_substring(const char *subject, int *ovector,         The scan continues until either the end of the subject is  reached,  or
560            int stringcount, int stringnumber,         there  are  no more unterminated paths. At this point, terminated paths
561            const char **stringptr);         represent the different matching possibilities (if there are none,  the
562           match  has  failed).   Thus,  if there is more than one possible match,
563           this algorithm finds all of them, and in particular, it finds the long-
564           est.  In PCRE, there is an option to stop the algorithm after the first
565           match (which is necessarily the shortest) has been found.
566    
567       int pcre_get_substring_list(const char *subject,         Note that all the matches that are found start at the same point in the
568            int *ovector, int stringcount, const char ***listptr);         subject. If the pattern
569    
570       void pcre_free_substring(const char *stringptr);           cat(er(pillar)?)
571    
572       void pcre_free_substring_list(const char **stringptr);         is  matched  against the string "the caterpillar catchment", the result
573           will be the three strings "cat", "cater", and "caterpillar" that  start
574           at the fourth character of the subject. The algorithm does not automat-
575           ically move on to find matches that start at later positions.
576    
577       const unsigned char *pcre_maketables(void);         There are a number of features of PCRE regular expressions that are not
578           supported by the alternative matching algorithm. They are as follows:
579    
580       int pcre_fullinfo(const pcre *code, const pcre_extra *extra,         1.  Because  the  algorithm  finds  all possible matches, the greedy or
581            int what, void *where);         ungreedy nature of repetition quantifiers is not relevant.  Greedy  and
582           ungreedy quantifiers are treated in exactly the same way. However, pos-
583           sessive quantifiers can make a difference when what follows could  also
584           match what is quantified, for example in a pattern like this:
585    
586             ^a++\w!
587    
588       int pcre_info(const pcre *code, int *optptr, *firstcharptr);         This  pattern matches "aaab!" but not "aaa!", which would be matched by
589           a non-possessive quantifier. Similarly, if an atomic group is  present,
590           it  is matched as if it were a standalone pattern at the current point,
591           and the longest match is then "locked in" for the rest of  the  overall
592           pattern.
593    
594       int pcre_config(int what, void *where);         2. When dealing with multiple paths through the tree simultaneously, it
595           is not straightforward to keep track of  captured  substrings  for  the
596           different  matching  possibilities,  and  PCRE's implementation of this
597           algorithm does not attempt to do this. This means that no captured sub-
598           strings are available.
599    
600       char *pcre_version(void);         3.  Because no substrings are captured, back references within the pat-
601           tern are not supported, and cause errors if encountered.
602    
603       void *(*pcre_malloc)(size_t);         4. For the same reason, conditional expressions that use  a  backrefer-
604           ence  as  the  condition or test for a specific group recursion are not
605           supported.
606    
607       void (*pcre_free)(void *);         5. Callouts are supported, but the value of the  capture_top  field  is
608           always 1, and the value of the capture_last field is always -1.
609    
610       int (*pcre_callout)(pcre_callout_block *);         6.  The \C escape sequence, which (in the standard algorithm) matches a
611           single byte, even in UTF-8 mode, is not supported because the  alterna-
612           tive  algorithm  moves  through  the  subject string one character at a
613           time, for all active paths through the tree.
614    
615    
616  PCRE API  ADVANTAGES OF THE ALTERNATIVE ALGORITHM
617    
618       PCRE has its own native API,  which  is  described  in  this         Using the alternative matching algorithm provides the following  advan-
619       document.  There  is  also  a  set of wrapper functions that         tages:
      correspond to the POSIX regular expression API.   These  are  
      described in the pcreposix documentation.  
620    
621       The native API function prototypes are defined in the header         1. All possible matches (at a single point in the subject) are automat-
622       file  pcre.h,  and  on  Unix  systems  the library itself is         ically found, and in particular, the longest match is  found.  To  find
623       called libpcre.a, so can be accessed by adding -lpcre to the         more than one match using the standard algorithm, you have to do kludgy
624       command  for  linking  an  application  which  calls it. The         things with callouts.
      header file defines the macros PCRE_MAJOR and PCRE_MINOR  to  
      contain the major and minor release numbers for the library.  
      Applications can use these to include support for  different  
      releases.  
625    
626       The functions pcre_compile(), pcre_study(), and  pcre_exec()         2. There is much better support for partial matching. The  restrictions
627       are  used  for compiling and matching regular expressions. A         on  the content of the pattern that apply when using the standard algo-
628       sample program that demonstrates the simplest way  of  using         rithm for partial matching do not apply to the  alternative  algorithm.
629       them  is  given in the file pcredemo.c. The pcresample docu-         For  non-anchored patterns, the starting position of a partial match is
630       mentation describes how to run it.         available.
631    
632       There are convenience functions for extracting captured sub-         3. Because the alternative algorithm  scans  the  subject  string  just
633       strings from a matched subject string. They are:         once,  and  never  needs to backtrack, it is possible to pass very long
634           subject strings to the matching function in  several  pieces,  checking
635           for partial matching each time.
636    
        pcre_copy_substring()  
        pcre_copy_named_substring()  
        pcre_get_substring()  
        pcre_get_named_substring()  
        pcre_get_substring_list()  
637    
638       pcre_free_substring()  and  pcre_free_substring_list()   are  DISADVANTAGES OF THE ALTERNATIVE ALGORITHM
      also  provided,  to  free  the  memory  used  for  extracted  
      strings.  
639    
640       The function pcre_maketables() is used (optionally) to build         The alternative algorithm suffers from a number of disadvantages:
      a  set of character tables in the current locale for passing  
      to pcre_compile().  
641    
642       The function pcre_fullinfo() is used to find out information         1.  It  is  substantially  slower  than the standard algorithm. This is
643       about a compiled pattern; pcre_info() is an obsolete version         partly because it has to search for all possible matches, but  is  also
644       which returns only some of the available information, but is         because it is less susceptible to optimization.
      retained   for   backwards   compatibility.    The  function  
      pcre_version() returns a pointer to a string containing  the  
      version of PCRE and its date of release.  
645    
646       The global variables  pcre_malloc  and  pcre_free  initially         2. Capturing parentheses and back references are not supported.
      contain the entry points of the standard malloc() and free()  
      functions respectively. PCRE  calls  the  memory  management  
      functions  via  these  variables,  so  a calling program can  
      replace them if it  wishes  to  intercept  the  calls.  This  
      should be done before calling any PCRE functions.  
647    
648       The global variable pcre_callout initially contains NULL. It         3. Although atomic groups are supported, their use does not provide the
649       can be set by the caller to a "callout" function, which PCRE         performance advantage that it does for the standard algorithm.
650       will then call at specified points during a matching  opera-  
651       tion. Details are given in the pcrecallout documentation.  
652    AUTHOR
653    
654           Philip Hazel
655           University Computing Service
656           Cambridge CB2 3QH, England.
657    
658    
659    REVISION
660    
661           Last updated: 06 March 2007
662           Copyright (c) 1997-2007 University of Cambridge.
663    ------------------------------------------------------------------------------
664    
665    
666    PCREAPI(3)                                                          PCREAPI(3)
667    
668    
669    NAME
670           PCRE - Perl-compatible regular expressions
671    
672    
673    PCRE NATIVE API
674    
675           #include <pcre.h>
676    
677           pcre *pcre_compile(const char *pattern, int options,
678                const char **errptr, int *erroffset,
679                const unsigned char *tableptr);
680    
681           pcre *pcre_compile2(const char *pattern, int options,
682                int *errorcodeptr,
683                const char **errptr, int *erroffset,
684                const unsigned char *tableptr);
685    
686           pcre_extra *pcre_study(const pcre *code, int options,
687                const char **errptr);
688    
689           int pcre_exec(const pcre *code, const pcre_extra *extra,
690                const char *subject, int length, int startoffset,
691                int options, int *ovector, int ovecsize);
692    
693           int pcre_dfa_exec(const pcre *code, const pcre_extra *extra,
694                const char *subject, int length, int startoffset,
695                int options, int *ovector, int ovecsize,
696                int *workspace, int wscount);
697    
698           int pcre_copy_named_substring(const pcre *code,
699                const char *subject, int *ovector,
700                int stringcount, const char *stringname,
701                char *buffer, int buffersize);
702    
703           int pcre_copy_substring(const char *subject, int *ovector,
704                int stringcount, int stringnumber, char *buffer,
705                int buffersize);
706    
707           int pcre_get_named_substring(const pcre *code,
708                const char *subject, int *ovector,
709                int stringcount, const char *stringname,
710                const char **stringptr);
711    
712           int pcre_get_stringnumber(const pcre *code,
713                const char *name);
714    
715           int pcre_get_stringtable_entries(const pcre *code,
716                const char *name, char **first, char **last);
717    
718           int pcre_get_substring(const char *subject, int *ovector,
719                int stringcount, int stringnumber,
720                const char **stringptr);
721    
722           int pcre_get_substring_list(const char *subject,
723                int *ovector, int stringcount, const char ***listptr);
724    
725           void pcre_free_substring(const char *stringptr);
726    
727           void pcre_free_substring_list(const char **stringptr);
728    
729           const unsigned char *pcre_maketables(void);
730    
731           int pcre_fullinfo(const pcre *code, const pcre_extra *extra,
732                int what, void *where);
733    
734           int pcre_info(const pcre *code, int *optptr, int *firstcharptr);
735    
736           int pcre_refcount(pcre *code, int adjust);
737    
738           int pcre_config(int what, void *where);
739    
740           char *pcre_version(void);
741    
742           void *(*pcre_malloc)(size_t);
743    
744           void (*pcre_free)(void *);
745    
746           void *(*pcre_stack_malloc)(size_t);
747    
748           void (*pcre_stack_free)(void *);
749    
750           int (*pcre_callout)(pcre_callout_block *);
751    
752    
753    PCRE API OVERVIEW
754    
755           PCRE has its own native API, which is described in this document. There
756           are also some wrapper functions that correspond to  the  POSIX  regular
757           expression  API.  These  are  described in the pcreposix documentation.
758           Both of these APIs define a set of C function calls. A C++  wrapper  is
759           distributed with PCRE. It is documented in the pcrecpp page.
760    
761           The  native  API  C  function prototypes are defined in the header file
762           pcre.h, and on Unix systems the library itself is called  libpcre.   It
763           can normally be accessed by adding -lpcre to the command for linking an
764           application  that  uses  PCRE.  The  header  file  defines  the  macros
765           PCRE_MAJOR  and  PCRE_MINOR to contain the major and minor release num-
766           bers for the library.  Applications can use these  to  include  support
767           for different releases of PCRE.
768    
769           The   functions   pcre_compile(),  pcre_compile2(),  pcre_study(),  and
770           pcre_exec() are used for compiling and matching regular expressions  in
771           a  Perl-compatible  manner. A sample program that demonstrates the sim-
772           plest way of using them is provided in the file  called  pcredemo.c  in
773           the  source distribution. The pcresample documentation describes how to
774           run it.
775    
776           A second matching function, pcre_dfa_exec(), which is not Perl-compati-
777           ble,  is  also provided. This uses a different algorithm for the match-
778           ing. The alternative algorithm finds all possible matches (at  a  given
779           point  in  the subject), and scans the subject just once. However, this
780           algorithm does not return captured substrings. A description of the two
781           matching  algorithms and their advantages and disadvantages is given in
782           the pcrematching documentation.
783    
784           In addition to the main compiling and  matching  functions,  there  are
785           convenience functions for extracting captured substrings from a subject
786           string that is matched by pcre_exec(). They are:
787    
788             pcre_copy_substring()
789             pcre_copy_named_substring()
790             pcre_get_substring()
791             pcre_get_named_substring()
792             pcre_get_substring_list()
793             pcre_get_stringnumber()
794             pcre_get_stringtable_entries()
795    
796           pcre_free_substring() and pcre_free_substring_list() are also provided,
797           to free the memory used for extracted strings.
798    
799           The  function  pcre_maketables()  is  used  to build a set of character
800           tables  in  the  current  locale   for   passing   to   pcre_compile(),
801           pcre_exec(),  or  pcre_dfa_exec(). This is an optional facility that is
802           provided for specialist use.  Most  commonly,  no  special  tables  are
803           passed,  in  which case internal tables that are generated when PCRE is
804           built are used.
805    
806           The function pcre_fullinfo() is used to find out  information  about  a
807           compiled  pattern; pcre_info() is an obsolete version that returns only
808           some of the available information, but is retained for  backwards  com-
809           patibility.   The function pcre_version() returns a pointer to a string
810           containing the version of PCRE and its date of release.
811    
812           The function pcre_refcount() maintains a  reference  count  in  a  data
813           block  containing  a compiled pattern. This is provided for the benefit
814           of object-oriented applications.
815    
816           The global variables pcre_malloc and pcre_free  initially  contain  the
817           entry  points  of  the  standard malloc() and free() functions, respec-
818           tively. PCRE calls the memory management functions via these variables,
819           so  a  calling  program  can replace them if it wishes to intercept the
820           calls. This should be done before calling any PCRE functions.
821    
822           The global variables pcre_stack_malloc  and  pcre_stack_free  are  also
823           indirections  to  memory  management functions. These special functions
824           are used only when PCRE is compiled to use  the  heap  for  remembering
825           data, instead of recursive function calls, when running the pcre_exec()
826           function. See the pcrebuild documentation for  details  of  how  to  do
827           this.  It  is  a non-standard way of building PCRE, for use in environ-
828           ments that have limited stacks. Because of the greater  use  of  memory
829           management,  it  runs  more  slowly. Separate functions are provided so
830           that special-purpose external code can be  used  for  this  case.  When
831           used,  these  functions  are always called in a stack-like manner (last
832           obtained, first freed), and always for memory blocks of the same  size.
833           There  is  a discussion about PCRE's stack usage in the pcrestack docu-
834           mentation.
835    
836           The global variable pcre_callout initially contains NULL. It can be set
837           by  the  caller  to  a "callout" function, which PCRE will then call at
838           specified points during a matching operation. Details are given in  the
839           pcrecallout documentation.
840    
841    
842    NEWLINES
843    
844           PCRE  supports four different conventions for indicating line breaks in
845           strings: a single CR (carriage return) character, a  single  LF  (line-
846           feed)  character,  the two-character sequence CRLF, or any Unicode new-
847           line sequence.  The Unicode newline sequences are the three  just  men-
848           tioned, plus the single characters VT (vertical tab, U+000B), FF (form-
849           feed, U+000C), NEL (next line, U+0085), LS  (line  separator,  U+2028),
850           and PS (paragraph separator, U+2029).
851    
852           Each  of  the first three conventions is used by at least one operating
853           system as its standard newline sequence. When PCRE is built, a  default
854           can  be  specified.  The default default is LF, which is the Unix stan-
855           dard. When PCRE is run, the default can be overridden,  either  when  a
856           pattern is compiled, or when it is matched.
857    
858           In the PCRE documentation the word "newline" is used to mean "the char-
859           acter or pair of characters that indicate a line break". The choice  of
860           newline  convention  affects  the  handling of the dot, circumflex, and
861           dollar metacharacters, the handling of #-comments in /x mode, and, when
862           CRLF  is a recognized line ending sequence, the match position advance-
863           ment for a non-anchored pattern. The choice of newline convention  does
864           not affect the interpretation of the \n or \r escape sequences.
865    
866    
867  MULTITHREADING  MULTITHREADING
868    
869       The PCRE functions can be used in  multi-threading  applica-         The  PCRE  functions  can be used in multi-threading applications, with
870       tions, with the proviso that the memory management functions         the  proviso  that  the  memory  management  functions  pointed  to  by
871       pointed to by pcre_malloc and  pcre_free,  and  the  callout         pcre_malloc, pcre_free, pcre_stack_malloc, and pcre_stack_free, and the
872       function  pointed  to  by  pcre_callout,  are  shared by all         callout function pointed to by pcre_callout, are shared by all threads.
873       threads.  
874           The  compiled form of a regular expression is not altered during match-
875       The compiled form of a regular  expression  is  not  altered         ing, so the same compiled pattern can safely be used by several threads
876       during  matching, so the same compiled pattern can safely be         at once.
877       used by several threads at once.  
878    
879    SAVING PRECOMPILED PATTERNS FOR LATER USE
880    
881           The compiled form of a regular expression can be saved and re-used at a
882           later time, possibly by a different program, and even on a  host  other
883           than  the  one  on  which  it  was  compiled.  Details are given in the
884           pcreprecompile documentation.
885    
886    
887  CHECKING BUILD-TIME OPTIONS  CHECKING BUILD-TIME OPTIONS
888    
889       int pcre_config(int what, void *where);         int pcre_config(int what, void *where);
890    
891           The function pcre_config() makes it possible for a PCRE client to  dis-
892           cover which optional features have been compiled into the PCRE library.
893           The pcrebuild documentation has more details about these optional  fea-
894           tures.
895    
896           The  first  argument  for pcre_config() is an integer, specifying which
897           information is required; the second argument is a pointer to a variable
898           into  which  the  information  is  placed. The following information is
899           available:
900    
901       The function pcre_config() makes  it  possible  for  a  PCRE           PCRE_CONFIG_UTF8
      client  to  discover  which optional features have been com-  
      piled into the PCRE library. The pcrebuild documentation has  
      more details about these optional features.  
902    
903       The first argument for pcre_config() is an integer, specify-         The output is an integer that is set to one if UTF-8 support is  avail-
904       ing  which information is required; the second argument is a         able; otherwise it is set to zero.
      pointer to a variable into which the information is  placed.  
      The following information is available:  
905    
906         PCRE_CONFIG_UTF8           PCRE_CONFIG_UNICODE_PROPERTIES
907    
908       The output is an integer that is set to one if UTF-8 support         The  output  is  an  integer  that is set to one if support for Unicode
909       is available; otherwise it is set to zero.         character properties is available; otherwise it is set to zero.
910    
911         PCRE_CONFIG_NEWLINE           PCRE_CONFIG_NEWLINE
912    
913       The output is an integer that is set to  the  value  of  the         The output is an integer whose value specifies  the  default  character
914       code  that  is  used for the newline character. It is either         sequence  that is recognized as meaning "newline". The four values that
915       linefeed (10) or carriage return (13), and  should  normally         are supported are: 10 for LF, 13 for CR, 3338 for CRLF, and -1 for ANY.
916       be the standard character for your operating system.         The default should normally be the standard sequence for your operating
917           system.
918    
919         PCRE_CONFIG_LINK_SIZE           PCRE_CONFIG_LINK_SIZE
920    
921       The output is an integer that contains the number  of  bytes         The output is an integer that contains the number  of  bytes  used  for
922       used  for  internal linkage in compiled regular expressions.         internal linkage in compiled regular expressions. The value is 2, 3, or
923       The value is 2, 3, or 4. Larger values allow larger  regular         4. Larger values allow larger regular expressions to  be  compiled,  at
924       expressions  to be compiled, at the expense of slower match-         the  expense  of  slower matching. The default value of 2 is sufficient
925       ing. The default value of 2 is sufficient for  all  but  the         for all but the most massive patterns, since  it  allows  the  compiled
926       most  massive patterns, since it allows the compiled pattern         pattern to be up to 64K in size.
      to be up to 64K in size.  
927    
928         PCRE_CONFIG_POSIX_MALLOC_THRESHOLD           PCRE_CONFIG_POSIX_MALLOC_THRESHOLD
929    
930       The output is an integer that contains the  threshold  above         The  output  is  an integer that contains the threshold above which the
931       which  the POSIX interface uses malloc() for output vectors.         POSIX interface uses malloc() for output vectors. Further  details  are
932       Further details are given in the pcreposix documentation.         given in the pcreposix documentation.
933    
934         PCRE_CONFIG_MATCH_LIMIT           PCRE_CONFIG_MATCH_LIMIT
935    
936       The output is an integer that gives the  default  limit  for         The output is an integer that gives the default limit for the number of
937       the   number  of  internal  matching  function  calls  in  a         internal matching function calls in a  pcre_exec()  execution.  Further
938       pcre_exec()  execution.  Further  details  are  given   with         details are given with pcre_exec() below.
939       pcre_exec() below.  
940             PCRE_CONFIG_MATCH_LIMIT_RECURSION
941    
942           The  output is an integer that gives the default limit for the depth of
943           recursion when calling the internal matching function in a  pcre_exec()
944           execution. Further details are given with pcre_exec() below.
945    
946             PCRE_CONFIG_STACKRECURSE
947    
948           The  output is an integer that is set to one if internal recursion when
949           running pcre_exec() is implemented by recursive function calls that use
950           the  stack  to remember their state. This is the usual way that PCRE is
951           compiled. The output is zero if PCRE was compiled to use blocks of data
952           on  the  heap  instead  of  recursive  function  calls.  In  this case,
953           pcre_stack_malloc and  pcre_stack_free  are  called  to  manage  memory
954           blocks on the heap, thus avoiding the use of the stack.
955    
956    
957  COMPILING A PATTERN  COMPILING A PATTERN
958    
959       pcre *pcre_compile(const char *pattern, int options,         pcre *pcre_compile(const char *pattern, int options,
960            const char **errptr, int *erroffset,              const char **errptr, int *erroffset,
961            const unsigned char *tableptr);              const unsigned char *tableptr);
962    
963       The function pcre_compile() is called to compile  a  pattern         pcre *pcre_compile2(const char *pattern, int options,
964       into  an internal form. The pattern is a C string terminated              int *errorcodeptr,
965       by a binary zero, and is passed in the argument  pattern.  A              const char **errptr, int *erroffset,
966       pointer  to  a  single  block of memory that is obtained via              const unsigned char *tableptr);
967       pcre_malloc is returned. This contains the compiled code and  
968       related  data.  The  pcre  type  is defined for the returned         Either of the functions pcre_compile() or pcre_compile2() can be called
969       block; this is a typedef for a structure whose contents  are         to compile a pattern into an internal form. The only difference between
970       not  externally  defined. It is up to the caller to free the         the  two interfaces is that pcre_compile2() has an additional argument,
971       memory when it is no longer required.         errorcodeptr, via which a numerical error code can be returned.
972    
973       Although the compiled code of a PCRE regex  is  relocatable,         The pattern is a C string terminated by a binary zero, and is passed in
974       that is, it does not depend on memory location, the complete         the  pattern  argument.  A  pointer to a single block of memory that is
975       pcre data block is not fully relocatable,  because  it  con-         obtained via pcre_malloc is returned. This contains the  compiled  code
976       tains  a  copy of the tableptr argument, which is an address         and related data. The pcre type is defined for the returned block; this
977       (see below).         is a typedef for a structure whose contents are not externally defined.
978       The options argument contains independent bits  that  affect         It is up to the caller to free the memory (via pcre_free) when it is no
979       the  compilation.  It  should  be  zero  if  no  options are         longer required.
980       required. Some of the options, in particular, those that are  
981       compatible  with Perl, can also be set and unset from within         Although the compiled code of a PCRE regex is relocatable, that is,  it
982       the pattern (see the detailed description of regular expres-         does not depend on memory location, the complete pcre data block is not
983       sions  in the pcrepattern documentation). For these options,         fully relocatable, because it may contain a copy of the tableptr  argu-
984       the contents of the options argument specifies their initial         ment, which is an address (see below).
985       settings  at  the  start  of  compilation and execution. The  
986       PCRE_ANCHORED option can be set at the time of  matching  as         The options argument contains various bit settings that affect the com-
987       well as at compile time.         pilation. It should be zero if no options are required.  The  available
988           options  are  described  below. Some of them, in particular, those that
989       If errptr is NULL, pcre_compile() returns NULL  immediately.         are compatible with Perl, can also be set and  unset  from  within  the
990       Otherwise, if compilation of a pattern fails, pcre_compile()         pattern  (see  the  detailed  description in the pcrepattern documenta-
991       returns NULL, and sets the variable pointed to by errptr  to         tion). For these options, the contents of the options  argument  speci-
992       point  to a textual error message. The offset from the start         fies  their initial settings at the start of compilation and execution.
993       of  the  pattern  to  the  character  where  the  error  was         The PCRE_ANCHORED and PCRE_NEWLINE_xxx options can be set at  the  time
994       discovered   is   placed  in  the  variable  pointed  to  by         of matching as well as at compile time.
995       erroffset, which must not be NULL. If it  is,  an  immediate  
996       error is given.         If errptr is NULL, pcre_compile() returns NULL immediately.  Otherwise,
997           if compilation of a pattern fails,  pcre_compile()  returns  NULL,  and
998       If the final  argument,  tableptr,  is  NULL,  PCRE  uses  a         sets the variable pointed to by errptr to point to a textual error mes-
999       default  set  of character tables which are built when it is         sage. This is a static string that is part of the library. You must not
1000       compiled, using the default C  locale.  Otherwise,  tableptr         try to free it. The offset from the start of the pattern to the charac-
1001       must  be  the result of a call to pcre_maketables(). See the         ter where the error was discovered is placed in the variable pointed to
1002       section on locale support below.         by  erroffset,  which must not be NULL. If it is, an immediate error is
1003           given.
1004       This code fragment shows a typical straightforward  call  to  
1005       pcre_compile():         If pcre_compile2() is used instead of pcre_compile(),  and  the  error-
1006           codeptr  argument is not NULL, a non-zero error code number is returned
1007         pcre *re;         via this argument in the event of an error. This is in addition to  the
1008         const char *error;         textual error message. Error codes and messages are listed below.
1009         int erroffset;  
1010         re = pcre_compile(         If  the  final  argument, tableptr, is NULL, PCRE uses a default set of
1011           "^A.*Z",          /* the pattern */         character tables that are  built  when  PCRE  is  compiled,  using  the
1012           0,                /* default options */         default  C  locale.  Otherwise, tableptr must be an address that is the
1013           &error,           /* for error message */         result of a call to pcre_maketables(). This value is  stored  with  the
1014           &erroffset,       /* for error offset */         compiled  pattern,  and used again by pcre_exec(), unless another table
1015           NULL);            /* use default character tables */         pointer is passed to it. For more discussion, see the section on locale
1016           support below.
1017       The following option bits are defined:  
1018           This  code  fragment  shows a typical straightforward call to pcre_com-
1019         PCRE_ANCHORED         pile():
1020    
1021       If this bit is set, the pattern is forced to be  "anchored",           pcre *re;
1022       that is, it is constrained to match only at the first match-           const char *error;
1023       ing point in the string which is being searched  (the  "sub-           int erroffset;
1024       ject string"). This effect can also be achieved by appropri-           re = pcre_compile(
1025       ate constructs in the pattern itself, which is the only  way             "^A.*Z",          /* the pattern */
1026       to do it in Perl.             0,                /* default options */
1027               &error,           /* for error message */
1028         PCRE_CASELESS             &erroffset,       /* for error offset */
1029               NULL);            /* use default character tables */
1030       If this bit is set, letters in the pattern match both  upper  
1031       and  lower  case  letters.  It  is  equivalent  to Perl's /i         The following names for option bits are defined in  the  pcre.h  header
1032       option, and it can be changed within a  pattern  by  a  (?i)         file:
1033       option setting.  
1034             PCRE_ANCHORED
1035         PCRE_DOLLAR_ENDONLY  
1036           If this bit is set, the pattern is forced to be "anchored", that is, it
1037       If this bit is set, a dollar metacharacter  in  the  pattern         is constrained to match only at the first matching point in the  string
1038       matches  only at the end of the subject string. Without this         that  is being searched (the "subject string"). This effect can also be
1039       option, a dollar also matches immediately before  the  final         achieved by appropriate constructs in the pattern itself, which is  the
1040       character  if it is a newline (but not before any other new-         only way to do it in Perl.
1041       lines).  The  PCRE_DOLLAR_ENDONLY  option  is   ignored   if  
1042       PCRE_MULTILINE is set. There is no equivalent to this option           PCRE_AUTO_CALLOUT
1043       in Perl, and no way to set it within a pattern.  
1044           If this bit is set, pcre_compile() automatically inserts callout items,
1045         PCRE_DOTALL         all with number 255, before each pattern item. For  discussion  of  the
1046           callout facility, see the pcrecallout documentation.
1047       If this bit is  set,  a  dot  metacharater  in  the  pattern  
1048       matches all characters, including newlines. Without it, new-           PCRE_CASELESS
1049       lines are excluded. This option is equivalent to  Perl's  /s  
1050       option,  and  it  can  be changed within a pattern by a (?s)         If  this  bit is set, letters in the pattern match both upper and lower
1051       option setting. A negative class such as [^a] always matches         case letters. It is equivalent to Perl's  /i  option,  and  it  can  be
1052       a  newline  character,  independent  of  the setting of this         changed  within a pattern by a (?i) option setting. In UTF-8 mode, PCRE
1053       option.         always understands the concept of case for characters whose values  are
1054           less  than 128, so caseless matching is always possible. For characters
1055         PCRE_EXTENDED         with higher values, the concept of case is supported if  PCRE  is  com-
1056           piled  with Unicode property support, but not otherwise. If you want to
1057       If this bit is set, whitespace data characters in  the  pat-         use caseless matching for characters 128 and  above,  you  must  ensure
1058       tern  are  totally  ignored  except when escaped or inside a         that  PCRE  is  compiled  with Unicode property support as well as with
1059       character class. Whitespace does not include the VT  charac-         UTF-8 support.
1060       ter  (code 11). In addition, characters between an unescaped  
1061       # outside a character class and the next newline  character,           PCRE_DOLLAR_ENDONLY
1062       inclusive, are also ignored. This is equivalent to Perl's /x  
1063       option, and it can be changed within a  pattern  by  a  (?x)         If this bit is set, a dollar metacharacter in the pattern matches  only
1064       option setting.         at  the  end  of the subject string. Without this option, a dollar also
1065           matches immediately before a newline at the end of the string (but  not
1066       This option makes it possible  to  include  comments  inside         before  any  other newlines). The PCRE_DOLLAR_ENDONLY option is ignored
1067       complicated patterns.  Note, however, that this applies only         if PCRE_MULTILINE is set.  There is no equivalent  to  this  option  in
1068       to data characters. Whitespace characters may  never  appear         Perl, and no way to set it within a pattern.
1069       within special character sequences in a pattern, for example  
1070       within the sequence (?( which introduces a conditional  sub-           PCRE_DOTALL
1071       pattern.  
1072           If this bit is set, a dot metacharater in the pattern matches all char-
1073         PCRE_EXTRA         acters, including those that indicate newline. Without it, a  dot  does
1074           not  match  when  the  current position is at a newline. This option is
1075       This option was invented in  order  to  turn  on  additional         equivalent to Perl's /s option, and it can be changed within a  pattern
1076       functionality of PCRE that is incompatible with Perl, but it         by  a (?s) option setting. A negative class such as [^a] always matches
1077       is currently of very little use. When set, any backslash  in         newline characters, independent of the setting of this option.
1078       a  pattern  that is followed by a letter that has no special  
1079       meaning causes an error, thus reserving  these  combinations           PCRE_DUPNAMES
1080       for  future  expansion.  By default, as in Perl, a backslash  
1081       followed by a letter with no special meaning is treated as a         If this bit is set, names used to identify capturing  subpatterns  need
1082       literal.  There  are at present no other features controlled         not be unique. This can be helpful for certain types of pattern when it
1083       by this option. It can also be set by a (?X) option  setting         is known that only one instance of the named  subpattern  can  ever  be
1084       within a pattern.         matched.  There  are  more details of named subpatterns below; see also
1085           the pcrepattern documentation.
1086         PCRE_MULTILINE  
1087             PCRE_EXTENDED
1088       By default, PCRE treats the subject string as consisting  of  
1089       a  single "line" of characters (even if it actually contains         If this bit is set, whitespace  data  characters  in  the  pattern  are
1090       several newlines). The "start  of  line"  metacharacter  (^)         totally ignored except when escaped or inside a character class. White-
1091       matches  only  at the start of the string, while the "end of         space does not include the VT character (code 11). In addition, charac-
1092       line" metacharacter ($) matches  only  at  the  end  of  the         ters between an unescaped # outside a character class and the next new-
1093       string,    or   before   a   terminating   newline   (unless         line, inclusive, are also ignored. This  is  equivalent  to  Perl's  /x
1094       PCRE_DOLLAR_ENDONLY is set). This is the same as Perl.         option,  and  it  can be changed within a pattern by a (?x) option set-
1095           ting.
1096       When PCRE_MULTILINE it is set, the "start of line" and  "end  
1097       of  line"  constructs match immediately following or immedi-         This option makes it possible to include  comments  inside  complicated
1098       ately before any newline  in  the  subject  string,  respec-         patterns.   Note,  however,  that this applies only to data characters.
1099       tively,  as  well  as  at  the  very  start and end. This is         Whitespace  characters  may  never  appear  within  special   character
1100       equivalent to Perl's /m option, and it can be changed within         sequences  in  a  pattern,  for  example  within the sequence (?( which
1101       a  pattern  by  a  (?m) option setting. If there are no "\n"         introduces a conditional subpattern.
1102       characters in a subject string, or no occurrences of ^ or  $  
1103       in a pattern, setting PCRE_MULTILINE has no effect.           PCRE_EXTRA
1104    
1105         PCRE_NO_AUTO_CAPTURE         This option was invented in order to turn on  additional  functionality
1106           of  PCRE  that  is  incompatible with Perl, but it is currently of very
1107       If this option is set, it disables the use of numbered  cap-         little use. When set, any backslash in a pattern that is followed by  a
1108       turing  parentheses  in the pattern. Any opening parenthesis         letter  that  has  no  special  meaning causes an error, thus reserving
1109       that is not followed by ? behaves as if it were followed  by         these combinations for future expansion. By  default,  as  in  Perl,  a
1110       ?:  but  named  parentheses  can still be used for capturing         backslash  followed by a letter with no special meaning is treated as a
1111       (and they acquire numbers in the usual  way).  There  is  no         literal. (Perl can, however, be persuaded to give a warning for  this.)
1112       equivalent of this option in Perl.         There  are  at  present no other features controlled by this option. It
1113           can also be set by a (?X) option setting within a pattern.
1114         PCRE_UNGREEDY  
1115             PCRE_FIRSTLINE
1116       This option inverts the "greediness" of the  quantifiers  so  
1117       that  they  are  not greedy by default, but become greedy if         If this option is set, an  unanchored  pattern  is  required  to  match
1118       followed by "?". It is not compatible with Perl. It can also         before  or  at  the  first  newline  in  the subject string, though the
1119       be set by a (?U) option setting within the pattern.         matched text may continue over the newline.
1120    
1121         PCRE_UTF8           PCRE_MULTILINE
1122    
1123       This option causes PCRE to regard both the pattern  and  the         By default, PCRE treats the subject string as consisting  of  a  single
1124       subject  as  strings  of UTF-8 characters instead of single-         line  of characters (even if it actually contains newlines). The "start
1125       byte character strings. However, it  is  available  only  if         of line" metacharacter (^) matches only at the  start  of  the  string,
1126       PCRE  has  been  built to include UTF-8 support. If not, the         while  the  "end  of line" metacharacter ($) matches only at the end of
1127       use of this option provokes an error. Details  of  how  this         the string, or before a terminating newline (unless PCRE_DOLLAR_ENDONLY
1128       option  changes  the behaviour of PCRE are given in the sec-         is set). This is the same as Perl.
1129       tion on UTF-8 support in the main pcre page.  
1130           When  PCRE_MULTILINE  it  is set, the "start of line" and "end of line"
1131           constructs match immediately following or immediately  before  internal
1132           newlines  in  the  subject string, respectively, as well as at the very
1133           start and end. This is equivalent to Perl's /m option, and  it  can  be
1134           changed within a pattern by a (?m) option setting. If there are no new-
1135           lines in a subject string, or no occurrences of ^ or $  in  a  pattern,
1136           setting PCRE_MULTILINE has no effect.
1137    
1138             PCRE_NEWLINE_CR
1139             PCRE_NEWLINE_LF
1140             PCRE_NEWLINE_CRLF
1141             PCRE_NEWLINE_ANY
1142    
1143           These  options  override the default newline definition that was chosen
1144           when PCRE was built. Setting the first or the second specifies  that  a
1145           newline  is  indicated  by a single character (CR or LF, respectively).
1146           Setting PCRE_NEWLINE_CRLF specifies that a newline is indicated by  the
1147           two-character  CRLF  sequence.  Setting PCRE_NEWLINE_ANY specifies that
1148           any Unicode newline sequence should be recognized. The Unicode  newline
1149           sequences  are  the three just mentioned, plus the single characters VT
1150           (vertical tab, U+000B), FF (formfeed, U+000C), NEL (next line, U+0085),
1151           LS  (line separator, U+2028), and PS (paragraph separator, U+2029). The
1152           last two are recognized only in UTF-8 mode.
1153    
1154           The newline setting in the  options  word  uses  three  bits  that  are
1155           treated  as  a  number, giving eight possibilities. Currently only five
1156           are used (default plus the four values above). This means that  if  you
1157           set  more  than  one  newline option, the combination may or may not be
1158           sensible. For example, PCRE_NEWLINE_CR with PCRE_NEWLINE_LF is  equiva-
1159           lent  to PCRE_NEWLINE_CRLF, but other combinations yield unused numbers
1160           and cause an error.
1161    
1162           The only time that a line break is specially recognized when  compiling
1163           a  pattern  is  if  PCRE_EXTENDED  is set, and an unescaped # outside a
1164           character class is encountered. This indicates  a  comment  that  lasts
1165           until  after the next line break sequence. In other circumstances, line
1166           break  sequences  are  treated  as  literal  data,   except   that   in
1167           PCRE_EXTENDED mode, both CR and LF are treated as whitespace characters
1168           and are therefore ignored.
1169    
1170           The newline option that is set at compile time becomes the default that
1171           is  used for pcre_exec() and pcre_dfa_exec(), but it can be overridden.
1172    
1173             PCRE_NO_AUTO_CAPTURE
1174    
1175           If this option is set, it disables the use of numbered capturing paren-
1176           theses  in the pattern. Any opening parenthesis that is not followed by
1177           ? behaves as if it were followed by ?: but named parentheses can  still
1178           be  used  for  capturing  (and  they acquire numbers in the usual way).
1179           There is no equivalent of this option in Perl.
1180    
1181             PCRE_UNGREEDY
1182    
1183           This option inverts the "greediness" of the quantifiers  so  that  they
1184           are  not greedy by default, but become greedy if followed by "?". It is
1185           not compatible with Perl. It can also be set by a (?U)  option  setting
1186           within the pattern.
1187    
1188             PCRE_UTF8
1189    
1190           This  option  causes PCRE to regard both the pattern and the subject as
1191           strings of UTF-8 characters instead of single-byte  character  strings.
1192           However,  it is available only when PCRE is built to include UTF-8 sup-
1193           port. If not, the use of this option provokes an error. Details of  how
1194           this  option  changes the behaviour of PCRE are given in the section on
1195           UTF-8 support in the main pcre page.
1196    
1197             PCRE_NO_UTF8_CHECK
1198    
1199           When PCRE_UTF8 is set, the validity of the pattern as a UTF-8 string is
1200           automatically  checked. If an invalid UTF-8 sequence of bytes is found,
1201           pcre_compile() returns an error. If you already know that your  pattern
1202           is  valid, and you want to skip this check for performance reasons, you
1203           can set the PCRE_NO_UTF8_CHECK option. When it is set,  the  effect  of
1204           passing an invalid UTF-8 string as a pattern is undefined. It may cause
1205           your program to crash.  Note that this option can  also  be  passed  to
1206           pcre_exec()  and pcre_dfa_exec(), to suppress the UTF-8 validity check-
1207           ing of subject strings.
1208    
1209    
1210    COMPILATION ERROR CODES
1211    
1212           The following table lists the error  codes  than  may  be  returned  by
1213           pcre_compile2(),  along with the error messages that may be returned by
1214           both compiling functions. As PCRE has developed, some error codes  have
1215           fallen out of use. To avoid confusion, they have not been re-used.
1216    
1217              0  no error
1218              1  \ at end of pattern
1219              2  \c at end of pattern
1220              3  unrecognized character follows \
1221              4  numbers out of order in {} quantifier
1222              5  number too big in {} quantifier
1223              6  missing terminating ] for character class
1224              7  invalid escape sequence in character class
1225              8  range out of order in character class
1226              9  nothing to repeat
1227             10  [this code is not in use]
1228             11  internal error: unexpected repeat
1229             12  unrecognized character after (?
1230             13  POSIX named classes are supported only within a class
1231             14  missing )
1232             15  reference to non-existent subpattern
1233             16  erroffset passed as NULL
1234             17  unknown option bit(s) set
1235             18  missing ) after comment
1236             19  [this code is not in use]
1237             20  regular expression too large
1238             21  failed to get memory
1239             22  unmatched parentheses
1240             23  internal error: code overflow
1241             24  unrecognized character after (?<
1242             25  lookbehind assertion is not fixed length
1243             26  malformed number or name after (?(
1244             27  conditional group contains more than two branches
1245             28  assertion expected after (?(
1246             29  (?R or (?digits must be followed by )
1247             30  unknown POSIX class name
1248             31  POSIX collating elements are not supported
1249             32  this version of PCRE is not compiled with PCRE_UTF8 support
1250             33  [this code is not in use]
1251             34  character value in \x{...} sequence is too large
1252             35  invalid condition (?(0)
1253             36  \C not allowed in lookbehind assertion
1254             37  PCRE does not support \L, \l, \N, \U, or \u
1255             38  number after (?C is > 255
1256             39  closing ) for (?C expected
1257             40  recursive call could loop indefinitely
1258             41  unrecognized character after (?P
1259             42  syntax error in subpattern name (missing terminator)
1260             43  two named subpatterns have the same name
1261             44  invalid UTF-8 string
1262             45  support for \P, \p, and \X has not been compiled
1263             46  malformed \P or \p sequence
1264             47  unknown property name after \P or \p
1265             48  subpattern name is too long (maximum 32 characters)
1266             49  too many named subpatterns (maximum 10,000)
1267             50  repeated subpattern is too long
1268             51  octal value is greater than \377 (not in UTF-8 mode)
1269             52  internal error: overran compiling workspace
1270             53   internal  error:  previously-checked  referenced  subpattern not
1271           found
1272             54  DEFINE group contains more than one branch
1273             55  repeating a DEFINE group is not allowed
1274             56  inconsistent NEWLINE options"
1275    
1276    
1277  STUDYING A PATTERN  STUDYING A PATTERN
1278    
1279       pcre_extra *pcre_study(const pcre *code, int options,         pcre_extra *pcre_study(const pcre *code, int options
1280            const char **errptr);              const char **errptr);
1281    
1282       When a pattern is going to be  used  several  times,  it  is         If a compiled pattern is going to be used several times,  it  is  worth
1283       worth  spending  more time analyzing it in order to speed up         spending more time analyzing it in order to speed up the time taken for
1284       the time taken for matching. The function pcre_study() takes         matching. The function pcre_study() takes a pointer to a compiled  pat-
1285       a  pointer  to  a compiled pattern as its first argument. If         tern as its first argument. If studying the pattern produces additional
1286       studing the pattern  produces  additional  information  that         information that will help speed up matching,  pcre_study()  returns  a
1287       will  help speed up matching, pcre_study() returns a pointer         pointer  to a pcre_extra block, in which the study_data field points to
1288       to a pcre_extra block, in which the study_data field  points         the results of the study.
1289       to the results of the study.  
1290           The  returned  value  from  pcre_study()  can  be  passed  directly  to
1291       The  returned  value  from  a  pcre_study()  can  be  passed         pcre_exec().  However,  a  pcre_extra  block also contains other fields
1292       directly  to pcre_exec(). However, the pcre_extra block also         that can be set by the caller before the block  is  passed;  these  are
1293       contains other fields that can be set by the  caller  before         described below in the section on matching a pattern.
1294       the  block is passed; these are described below. If studying  
1295       the pattern does not  produce  any  additional  information,         If  studying  the  pattern  does not produce any additional information
1296       pcre_study() returns NULL. In that circumstance, if the cal-         pcre_study() returns NULL. In that circumstance, if the calling program
1297       ling program wants to pass  some  of  the  other  fields  to         wants  to  pass  any of the other fields to pcre_exec(), it must set up
1298       pcre_exec(), it must set up its own pcre_extra block.         its own pcre_extra block.
1299    
1300       The second argument contains option  bits.  At  present,  no         The second argument of pcre_study() contains option bits.  At  present,
1301       options  are  defined  for  pcre_study(),  and this argument         no options are defined, and this argument should always be zero.
1302       should always be zero.  
1303           The  third argument for pcre_study() is a pointer for an error message.
1304       The third argument for pcre_study()  is  a  pointer  for  an         If studying succeeds (even if no data is  returned),  the  variable  it
1305       error  message.  If  studying  succeeds  (even if no data is         points  to  is  set  to NULL. Otherwise it is set to point to a textual
1306       returned), the variable it points to is set to NULL.  Other-         error message. This is a static string that is part of the library. You
1307       wise it points to a textual error message. You should there-         must  not  try  to  free it. You should test the error pointer for NULL
1308       fore  test  the  error  pointer  for  NULL   after   calling         after calling pcre_study(), to be sure that it has run successfully.
1309       pcre_study(), to be sure that it has run successfully.  
1310           This is a typical call to pcre_study():
1311       This is a typical call to pcre_study():  
1312             pcre_extra *pe;
1313         pcre_extra *pe;           pe = pcre_study(
1314         pe = pcre_study(             re,             /* result of pcre_compile() */
1315           re,             /* result of pcre_compile() */             0,              /* no options exist */
1316           0,              /* no options exist */             &error);        /* set to NULL or points to a message */
1317           &error);        /* set to NULL or points to a message */  
1318           At present, studying a pattern is useful only for non-anchored patterns
1319       At present, studying a  pattern  is  useful  only  for  non-         that  do not have a single fixed starting character. A bitmap of possi-
1320       anchored  patterns  that do not have a single fixed starting         ble starting bytes is created.
      character. A  bitmap  of  possible  starting  characters  is  
      created.  
1321    
1322    
1323  LOCALE SUPPORT  LOCALE SUPPORT
1324    
1325       PCRE handles caseless matching, and determines whether char-         PCRE handles caseless matching, and determines whether  characters  are
1326       acters  are  letters, digits, or whatever, by reference to a         letters,  digits, or whatever, by reference to a set of tables, indexed
1327       set of tables. When running in UTF-8 mode, this applies only         by character value. When running in UTF-8 mode, this  applies  only  to
1328       to characters with codes less than 256. The library contains         characters  with  codes  less than 128. Higher-valued codes never match
1329       a default set of tables that is created  in  the  default  C         escapes such as \w or \d, but can be tested with \p if  PCRE  is  built
1330       locale  when  PCRE  is compiled. This is used when the final         with  Unicode  character property support. The use of locales with Uni-
1331       argument of pcre_compile() is NULL, and  is  sufficient  for         code is discouraged. If you are handling characters with codes  greater
1332       many applications.         than  128, you should either use UTF-8 and Unicode, or use locales, but
1333           not try to mix the two.
1334       An alternative set of tables can, however, be supplied. Such  
1335       tables  are built by calling the pcre_maketables() function,         PCRE contains an internal set of tables that are used  when  the  final
1336       which has no arguments, in the relevant locale.  The  result         argument  of  pcre_compile()  is  NULL.  These  are sufficient for many
1337       can  then be passed to pcre_compile() as often as necessary.         applications.  Normally, the internal tables recognize only ASCII char-
1338       For example, to build and use tables  that  are  appropriate         acters. However, when PCRE is built, it is possible to cause the inter-
1339       for  the French locale (where accented characters with codes         nal tables to be rebuilt in the default "C" locale of the local system,
1340       greater than 128 are treated as letters), the following code         which may cause them to be different.
1341       could be used:  
1342           The  internal tables can always be overridden by tables supplied by the
1343         setlocale(LC_CTYPE, "fr");         application that calls PCRE. These may be created in a different locale
1344         tables = pcre_maketables();         from  the  default.  As more and more applications change to using Uni-
1345         re = pcre_compile(..., tables);         code, the need for this locale support is expected to die away.
1346    
1347       The  tables  are  built  in  memory  that  is  obtained  via         External tables are built by calling  the  pcre_maketables()  function,
1348       pcre_malloc.  The  pointer that is passed to pcre_compile is         which  has no arguments, in the relevant locale. The result can then be
1349       saved with the compiled pattern, and  the  same  tables  are         passed to pcre_compile() or pcre_exec()  as  often  as  necessary.  For
1350       used via this pointer by pcre_study() and pcre_exec(). Thus,         example,  to  build  and use tables that are appropriate for the French
1351       for any single pattern, compilation, studying  and  matching         locale (where accented characters with  values  greater  than  128  are
1352       all happen in the same locale, but different patterns can be         treated as letters), the following code could be used:
1353       compiled in different locales. It is the caller's  responsi-  
1354       bility  to  ensure  that  the  memory  containing the tables           setlocale(LC_CTYPE, "fr_FR");
1355       remains available for as long as it is needed.           tables = pcre_maketables();
1356             re = pcre_compile(..., tables);
1357    
1358           The  locale  name "fr_FR" is used on Linux and other Unix-like systems;
1359           if you are using Windows, the name for the French locale is "french".
1360    
1361           When pcre_maketables() runs, the tables are built  in  memory  that  is
1362           obtained  via  pcre_malloc. It is the caller's responsibility to ensure
1363           that the memory containing the tables remains available for as long  as
1364           it is needed.
1365    
1366           The pointer that is passed to pcre_compile() is saved with the compiled
1367           pattern, and the same tables are used via this pointer by  pcre_study()
1368           and normally also by pcre_exec(). Thus, by default, for any single pat-
1369           tern, compilation, studying and matching all happen in the same locale,
1370           but different patterns can be compiled in different locales.
1371    
1372           It  is  possible to pass a table pointer or NULL (indicating the use of
1373           the internal tables) to pcre_exec(). Although  not  intended  for  this
1374           purpose,  this facility could be used to match a pattern in a different
1375           locale from the one in which it was compiled. Passing table pointers at
1376           run time is discussed below in the section on matching a pattern.
1377    
1378    
1379  INFORMATION ABOUT A PATTERN  INFORMATION ABOUT A PATTERN
1380    
1381       int pcre_fullinfo(const pcre *code, const pcre_extra *extra,         int pcre_fullinfo(const pcre *code, const pcre_extra *extra,
1382            int what, void *where);              int what, void *where);
1383    
1384       The pcre_fullinfo() function  returns  information  about  a         The  pcre_fullinfo() function returns information about a compiled pat-
1385       compiled pattern. It replaces the obsolete pcre_info() func-         tern. It replaces the obsolete pcre_info() function, which is neverthe-
1386       tion, which is nevertheless retained for backwards compabil-         less retained for backwards compability (and is documented below).
1387       ity (and is documented below).  
1388           The  first  argument  for  pcre_fullinfo() is a pointer to the compiled
1389       The first argument for pcre_fullinfo() is a pointer  to  the         pattern. The second argument is the result of pcre_study(), or NULL  if
1390       compiled  pattern.  The  second  argument  is  the result of         the  pattern  was not studied. The third argument specifies which piece
1391       pcre_study(), or NULL if the pattern was  not  studied.  The         of information is required, and the fourth argument is a pointer  to  a
1392       third  argument  specifies  which  piece  of  information is         variable  to  receive  the  data. The yield of the function is zero for
1393       required, and the fourth argument is a pointer to a variable         success, or one of the following negative numbers:
1394       to  receive  the data. The yield of the function is zero for  
1395       success, or one of the following negative numbers:           PCRE_ERROR_NULL       the argument code was NULL
1396                                   the argument where was NULL
1397         PCRE_ERROR_NULL       the argument code was NULL           PCRE_ERROR_BADMAGIC   the "magic number" was not found
1398                               the argument where was NULL           PCRE_ERROR_BADOPTION  the value of what was invalid
1399         PCRE_ERROR_BADMAGIC   the "magic number" was not found  
1400         PCRE_ERROR_BADOPTION  the value of what was invalid         The "magic number" is placed at the start of each compiled  pattern  as
1401           an  simple check against passing an arbitrary memory pointer. Here is a
1402       Here is a typical call of  pcre_fullinfo(),  to  obtain  the         typical call of pcre_fullinfo(), to obtain the length of  the  compiled
1403       length of the compiled pattern:         pattern:
1404    
1405         int rc;           int rc;
1406         unsigned long int length;           size_t length;
1407         rc = pcre_fullinfo(           rc = pcre_fullinfo(
1408           re,               /* result of pcre_compile() */             re,               /* result of pcre_compile() */
1409           pe,               /* result of pcre_study(), or NULL */             pe,               /* result of pcre_study(), or NULL */
1410           PCRE_INFO_SIZE,   /* what is required */             PCRE_INFO_SIZE,   /* what is required */
1411           &length);         /* where to put the data */             &length);         /* where to put the data */
1412    
1413       The possible values for the third argument  are  defined  in         The  possible  values for the third argument are defined in pcre.h, and
1414       pcre.h, and are as follows:         are as follows:
1415    
1416         PCRE_INFO_BACKREFMAX           PCRE_INFO_BACKREFMAX
1417    
1418       Return the number of the highest back reference in the  pat-         Return the number of the highest back reference  in  the  pattern.  The
1419       tern.  The  fourth argument should point to an int variable.         fourth  argument  should  point to an int variable. Zero is returned if
1420       Zero is returned if there are no back references.         there are no back references.
1421    
1422         PCRE_INFO_CAPTURECOUNT           PCRE_INFO_CAPTURECOUNT
1423    
1424       Return the number of capturing subpatterns in  the  pattern.         Return the number of capturing subpatterns in the pattern.  The  fourth
1425       The fourth argument should point to an int variable.         argument should point to an int variable.
1426    
1427         PCRE_INFO_FIRSTBYTE           PCRE_INFO_DEFAULT_TABLES
1428    
1429       Return information about  the  first  byte  of  any  matched         Return  a pointer to the internal default character tables within PCRE.
1430       string,  for a non-anchored pattern. (This option used to be         The fourth argument should point to an unsigned char *  variable.  This
1431       called PCRE_INFO_FIRSTCHAR; the old name is still recognized         information call is provided for internal use by the pcre_study() func-
1432       for backwards compatibility.)         tion. External callers can cause PCRE to use  its  internal  tables  by
1433           passing a NULL table pointer.
1434       If there is a fixed first byte, e.g. from a pattern such  as  
1435       (cat|cow|coyote),  it  is returned in the integer pointed to           PCRE_INFO_FIRSTBYTE
1436       by where. Otherwise, if either  
1437           Return  information  about  the first byte of any matched string, for a
1438       (a) the pattern was compiled with the PCRE_MULTILINE option,         non-anchored pattern. The fourth argument should point to an int  vari-
1439       and every branch starts with "^", or         able.  (This option used to be called PCRE_INFO_FIRSTCHAR; the old name
1440           is still recognized for backwards compatibility.)
1441       (b) every  branch  of  the  pattern  starts  with  ".*"  and  
1442       PCRE_DOTALL is not set (if it were set, the pattern would be         If there is a fixed first byte, for example, from  a  pattern  such  as
1443       anchored),         (cat|cow|coyote), its value is returned. Otherwise, if either
1444    
1445       -1 is returned, indicating that the pattern matches only  at         (a)  the pattern was compiled with the PCRE_MULTILINE option, and every
1446       the  start  of  a subject string or after any newline within         branch starts with "^", or
1447       the string. Otherwise -2 is returned. For anchored patterns,  
1448       -2 is returned.         (b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not
1449           set (if it were set, the pattern would be anchored),
1450         PCRE_INFO_FIRSTTABLE  
1451           -1  is  returned, indicating that the pattern matches only at the start
1452       If the pattern was studied, and this resulted  in  the  con-         of a subject string or after any newline within the  string.  Otherwise
1453       struction of a 256-bit table indicating a fixed set of bytes         -2 is returned. For anchored patterns, -2 is returned.
1454       for the first byte in any matching string, a pointer to  the  
1455       table  is  returned.  Otherwise NULL is returned. The fourth           PCRE_INFO_FIRSTTABLE
1456       argument should point to an unsigned char * variable.  
1457           If  the pattern was studied, and this resulted in the construction of a
1458         PCRE_INFO_LASTLITERAL         256-bit table indicating a fixed set of bytes for the first byte in any
1459           matching  string, a pointer to the table is returned. Otherwise NULL is
1460       Return the value of the rightmost  literal  byte  that  must         returned. The fourth argument should point to an unsigned char *  vari-
1461       exist  in  any  matched  string, other than at its start, if         able.
1462       such a byte has been recorded. The  fourth  argument  should  
1463       point  to  an  int variable. If there is no such byte, -1 is           PCRE_INFO_LASTLITERAL
1464       returned. For anchored patterns,  a  last  literal  byte  is  
1465       recorded  only  if  it follows something of variable length.         Return  the  value of the rightmost literal byte that must exist in any
1466       For example, for the pattern /^a\d+z\d+/ the returned  value         matched string, other than at its  start,  if  such  a  byte  has  been
1467       is "z", but for /^a\dz\d/ the returned value is -1.         recorded. The fourth argument should point to an int variable. If there
1468           is no such byte, -1 is returned. For anchored patterns, a last  literal
1469         PCRE_INFO_NAMECOUNT         byte  is  recorded only if it follows something of variable length. For
1470         PCRE_INFO_NAMEENTRYSIZE         example, for the pattern /^a\d+z\d+/ the returned value is "z", but for
1471         PCRE_INFO_NAMETABLE         /^a\dz\d/ the returned value is -1.
1472    
1473       PCRE supports the use of named as well as numbered capturing           PCRE_INFO_NAMECOUNT
1474       parentheses. The names are just an additional way of identi-           PCRE_INFO_NAMEENTRYSIZE
1475       fying the parentheses,  which  still  acquire  a  number.  A           PCRE_INFO_NAMETABLE
1476       caller  that  wants  to extract data from a named subpattern  
1477       must convert the name to a number in  order  to  access  the         PCRE  supports the use of named as well as numbered capturing parenthe-
1478       correct  pointers  in  the  output  vector  (described  with         ses. The names are just an additional way of identifying the  parenthe-
1479       pcre_exec() below). In order to do this, it must  first  use         ses, which still acquire numbers. Several convenience functions such as
1480       these  three  values  to  obtain  the name-to-number mapping         pcre_get_named_substring() are provided for  extracting  captured  sub-
1481       table for the pattern.         strings  by  name. It is also possible to extract the data directly, by
1482           first converting the name to a number in order to  access  the  correct
1483       The  map  consists  of  a  number  of  fixed-size   entries.         pointers in the output vector (described with pcre_exec() below). To do
1484       PCRE_INFO_NAMECOUNT   gives   the  number  of  entries,  and         the conversion, you need  to  use  the  name-to-number  map,  which  is
1485       PCRE_INFO_NAMEENTRYSIZE gives the size of each  entry;  both         described by these three values.
1486       of  these return an int value. The entry size depends on the  
1487       length of the longest name.  PCRE_INFO_NAMETABLE  returns  a         The map consists of a number of fixed-size entries. PCRE_INFO_NAMECOUNT
1488       pointer to the first entry of the table (a pointer to char).         gives the number of entries, and PCRE_INFO_NAMEENTRYSIZE gives the size
1489       The first two bytes of each entry are the number of the cap-         of  each  entry;  both  of  these  return  an int value. The entry size
1490       turing parenthesis, most significant byte first. The rest of         depends on the length of the longest name. PCRE_INFO_NAMETABLE  returns
1491       the entry is the corresponding name,  zero  terminated.  The         a  pointer  to  the  first  entry of the table (a pointer to char). The
1492       names  are  in alphabetical order. For example, consider the         first two bytes of each entry are the number of the capturing parenthe-
1493       following pattern (assume PCRE_EXTENDED  is  set,  so  white         sis,  most  significant byte first. The rest of the entry is the corre-
1494       space - including newlines - is ignored):         sponding name, zero terminated. The names are  in  alphabetical  order.
1495           When PCRE_DUPNAMES is set, duplicate names are in order of their paren-
1496         (?P<date> (?P<year>(\d\d)?\d\d) -         theses numbers. For example, consider  the  following  pattern  (assume
1497         (?P<month>\d\d) - (?P<day>\d\d) )         PCRE_EXTENDED  is  set,  so  white  space  -  including  newlines  - is
1498           ignored):
1499       There are four named subpatterns,  so  the  table  has  four  
1500       entries,  and  each  entry in the table is eight bytes long.           (?<date> (?<year>(\d\d)?\d\d) -
1501       The table is as follows, with non-printing  bytes  shows  in           (?<month>\d\d) - (?<day>\d\d) )
1502       hex, and undefined bytes shown as ??:  
1503           There are four named subpatterns, so the table has  four  entries,  and
1504         00 01 d  a  t  e  00 ??         each  entry  in the table is eight bytes long. The table is as follows,
1505         00 05 d  a  y  00 ?? ??         with non-printing bytes shows in hexadecimal, and undefined bytes shown
1506         00 04 m  o  n  t  h  00         as ??:
1507         00 02 y  e  a  r  00 ??  
1508             00 01 d  a  t  e  00 ??
1509       When writing code to extract data  from  named  subpatterns,           00 05 d  a  y  00 ?? ??
1510       remember  that the length of each entry may be different for           00 04 m  o  n  t  h  00
1511       each compiled pattern.           00 02 y  e  a  r  00 ??
1512    
1513         PCRE_INFO_OPTIONS         When  writing  code  to  extract  data from named subpatterns using the
1514           name-to-number map, remember that the length of the entries  is  likely
1515       Return a copy of the options with which the pattern was com-         to be different for each compiled pattern.
1516       piled.  The fourth argument should point to an unsigned long  
1517       int variable. These option bits are those specified  in  the           PCRE_INFO_OPTIONS
1518       call  to  pcre_compile(),  modified  by any top-level option  
1519       settings within the pattern itself.         Return  a  copy of the options with which the pattern was compiled. The
1520           fourth argument should point to an unsigned long  int  variable.  These
1521       A pattern is automatically anchored by PCRE if  all  of  its         option bits are those specified in the call to pcre_compile(), modified
1522       top-level alternatives begin with one of the following:         by any top-level option settings within the pattern itself.
1523    
1524         ^     unless PCRE_MULTILINE is set         A pattern is automatically anchored by PCRE if  all  of  its  top-level
1525         \A    always         alternatives begin with one of the following:
1526         \G    always  
1527         .*    if PCRE_DOTALL is set and there are no back           ^     unless PCRE_MULTILINE is set
1528                 references to the subpattern in which .* appears           \A    always
1529             \G    always
1530       For such patterns, the  PCRE_ANCHORED  bit  is  set  in  the           .*    if PCRE_DOTALL is set and there are no back
1531       options returned by pcre_fullinfo().                   references to the subpattern in which .* appears
1532    
1533         PCRE_INFO_SIZE         For such patterns, the PCRE_ANCHORED bit is set in the options returned
1534           by pcre_fullinfo().
1535       Return the size of the compiled pattern, that is, the  value  
1536       that  was  passed as the argument to pcre_malloc() when PCRE           PCRE_INFO_SIZE
1537       was getting memory in which to place the compiled data.  The  
1538       fourth argument should point to a size_t variable.         Return the size of the compiled pattern, that is, the  value  that  was
1539           passed as the argument to pcre_malloc() when PCRE was getting memory in
1540         PCRE_INFO_STUDYSIZE         which to place the compiled data. The fourth argument should point to a
1541           size_t variable.
1542       Returns the size  of  the  data  block  pointed  to  by  the  
1543       study_data  field  in a pcre_extra block. That is, it is the           PCRE_INFO_STUDYSIZE
1544       value that was passed to pcre_malloc() when PCRE was getting  
1545       memory into which to place the data created by pcre_study().         Return the size of the data block pointed to by the study_data field in
1546       The fourth argument should point to a size_t variable.         a pcre_extra block. That is,  it  is  the  value  that  was  passed  to
1547           pcre_malloc() when PCRE was getting memory into which to place the data
1548           created by pcre_study(). The fourth argument should point to  a  size_t
1549           variable.
1550    
1551    
1552  OBSOLETE INFO FUNCTION  OBSOLETE INFO FUNCTION
1553    
1554       int pcre_info(const pcre *code, int *optptr, *firstcharptr);         int pcre_info(const pcre *code, int *optptr, int *firstcharptr);
1555    
1556       The pcre_info() function is now obsolete because its  inter-         The  pcre_info()  function is now obsolete because its interface is too
1557       face  is  too  restrictive  to return all the available data         restrictive to return all the available data about a compiled  pattern.
1558       about  a  compiled  pattern.   New   programs   should   use         New   programs   should  use  pcre_fullinfo()  instead.  The  yield  of
1559       pcre_fullinfo()  instead.  The  yield  of pcre_info() is the         pcre_info() is the number of capturing subpatterns, or one of the  fol-
1560       number of capturing subpatterns, or  one  of  the  following         lowing negative numbers:
1561       negative numbers:  
1562             PCRE_ERROR_NULL       the argument code was NULL
1563         PCRE_ERROR_NULL       the argument code was NULL           PCRE_ERROR_BADMAGIC   the "magic number" was not found
1564         PCRE_ERROR_BADMAGIC   the "magic number" was not found  
1565           If  the  optptr  argument is not NULL, a copy of the options with which
1566       If the optptr argument is not NULL, a copy  of  the  options         the pattern was compiled is placed in the integer  it  points  to  (see
1567       with which the pattern was compiled is placed in the integer         PCRE_INFO_OPTIONS above).
1568       it points to (see PCRE_INFO_OPTIONS above).  
1569           If  the  pattern  is  not anchored and the firstcharptr argument is not
1570       If the pattern is not anchored and the firstcharptr argument         NULL, it is used to pass back information about the first character  of
1571       is  not  NULL, it is used to pass back information about the         any matched string (see PCRE_INFO_FIRSTBYTE above).
1572       first    character    of    any    matched    string    (see  
1573       PCRE_INFO_FIRSTBYTE above).  
1574    REFERENCE COUNTS
1575    
1576           int pcre_refcount(pcre *code, int adjust);
1577    
1578           The  pcre_refcount()  function is used to maintain a reference count in
1579           the data block that contains a compiled pattern. It is provided for the
1580           benefit  of  applications  that  operate  in an object-oriented manner,
1581           where different parts of the application may be using the same compiled
1582           pattern, but you want to free the block when they are all done.
1583    
1584           When a pattern is compiled, the reference count field is initialized to
1585           zero.  It is changed only by calling this function, whose action is  to
1586           add  the  adjust  value  (which may be positive or negative) to it. The
1587           yield of the function is the new value. However, the value of the count
1588           is  constrained to lie between 0 and 65535, inclusive. If the new value
1589           is outside these limits, it is forced to the appropriate limit value.
1590    
1591           Except when it is zero, the reference count is not correctly  preserved
1592           if  a  pattern  is  compiled on one host and then transferred to a host
1593           whose byte-order is different. (This seems a highly unlikely scenario.)
1594    
1595    
1596    MATCHING A PATTERN: THE TRADITIONAL FUNCTION
1597    
1598           int pcre_exec(const pcre *code, const pcre_extra *extra,
1599                const char *subject, int length, int startoffset,
1600                int options, int *ovector, int ovecsize);
1601    
1602           The  function pcre_exec() is called to match a subject string against a
1603           compiled pattern, which is passed in the code argument. If the  pattern
1604           has been studied, the result of the study should be passed in the extra
1605           argument. This function is the main matching facility of  the  library,
1606           and it operates in a Perl-like manner. For specialist use there is also
1607           an alternative matching function, which is described below in the  sec-
1608           tion about the pcre_dfa_exec() function.
1609    
1610           In  most applications, the pattern will have been compiled (and option-
1611           ally studied) in the same process that calls pcre_exec().  However,  it
1612           is possible to save compiled patterns and study data, and then use them
1613           later in different processes, possibly even on different hosts.  For  a
1614           discussion about this, see the pcreprecompile documentation.
1615    
1616           Here is an example of a simple call to pcre_exec():
1617    
1618             int rc;
1619             int ovector[30];
1620             rc = pcre_exec(
1621               re,             /* result of pcre_compile() */
1622               NULL,           /* we didn't study the pattern */
1623               "some string",  /* the subject string */
1624               11,             /* the length of the subject string */
1625               0,              /* start at offset 0 in the subject */
1626               0,              /* default options */
1627               ovector,        /* vector of integers for substring information */
1628               30);            /* number of elements (NOT size in bytes) */
1629    
1630       Extra data for pcre_exec()
1631    
1632           If  the  extra argument is not NULL, it must point to a pcre_extra data
1633           block. The pcre_study() function returns such a block (when it  doesn't
1634           return  NULL), but you can also create one for yourself, and pass addi-
1635           tional information in it. The pcre_extra block contains  the  following
1636           fields (not necessarily in this order):
1637    
1638             unsigned long int flags;
1639             void *study_data;
1640             unsigned long int match_limit;
1641             unsigned long int match_limit_recursion;
1642             void *callout_data;
1643             const unsigned char *tables;
1644    
1645           The  flags  field  is a bitmap that specifies which of the other fields
1646           are set. The flag bits are:
1647    
1648             PCRE_EXTRA_STUDY_DATA
1649             PCRE_EXTRA_MATCH_LIMIT
1650             PCRE_EXTRA_MATCH_LIMIT_RECURSION
1651             PCRE_EXTRA_CALLOUT_DATA
1652             PCRE_EXTRA_TABLES
1653    
1654           Other flag bits should be set to zero. The study_data field is  set  in
1655           the  pcre_extra  block  that is returned by pcre_study(), together with
1656           the appropriate flag bit. You should not set this yourself, but you may
1657           add  to  the  block by setting the other fields and their corresponding
1658           flag bits.
1659    
1660           The match_limit field provides a means of preventing PCRE from using up
1661           a  vast amount of resources when running patterns that are not going to
1662           match, but which have a very large number  of  possibilities  in  their
1663           search  trees.  The  classic  example  is  the  use of nested unlimited
1664           repeats.
1665    
1666           Internally, PCRE uses a function called match() which it calls  repeat-
1667           edly  (sometimes  recursively). The limit set by match_limit is imposed
1668           on the number of times this function is called during  a  match,  which
1669           has  the  effect  of  limiting the amount of backtracking that can take
1670           place. For patterns that are not anchored, the count restarts from zero
1671           for each position in the subject string.
1672    
1673           The  default  value  for  the  limit can be set when PCRE is built; the
1674           default default is 10 million, which handles all but the  most  extreme
1675           cases.  You  can  override  the  default by suppling pcre_exec() with a
1676           pcre_extra    block    in    which    match_limit    is    set,     and
1677           PCRE_EXTRA_MATCH_LIMIT  is  set  in  the  flags  field. If the limit is
1678           exceeded, pcre_exec() returns PCRE_ERROR_MATCHLIMIT.
1679    
1680           The match_limit_recursion field is similar to match_limit, but  instead
1681           of limiting the total number of times that match() is called, it limits
1682           the depth of recursion. The recursion depth is a  smaller  number  than
1683           the  total number of calls, because not all calls to match() are recur-
1684           sive.  This limit is of use only if it is set smaller than match_limit.
1685    
1686           Limiting  the  recursion  depth  limits the amount of stack that can be
1687           used, or, when PCRE has been compiled to use memory on the heap instead
1688           of the stack, the amount of heap memory that can be used.
1689    
1690           The  default  value  for  match_limit_recursion can be set when PCRE is
1691           built; the default default  is  the  same  value  as  the  default  for
1692           match_limit.  You can override the default by suppling pcre_exec() with
1693           a  pcre_extra  block  in  which  match_limit_recursion  is   set,   and
1694           PCRE_EXTRA_MATCH_LIMIT_RECURSION  is  set  in  the  flags field. If the
1695           limit is exceeded, pcre_exec() returns PCRE_ERROR_RECURSIONLIMIT.
1696    
1697           The pcre_callout field is used in conjunction with the  "callout"  fea-
1698           ture, which is described in the pcrecallout documentation.
1699    
1700           The  tables  field  is  used  to  pass  a  character  tables pointer to
1701           pcre_exec(); this overrides the value that is stored with the  compiled
1702           pattern.  A  non-NULL value is stored with the compiled pattern only if
1703           custom tables were supplied to pcre_compile() via  its  tableptr  argu-
1704           ment.  If NULL is passed to pcre_exec() using this mechanism, it forces
1705           PCRE's internal tables to be used. This facility is  helpful  when  re-
1706           using  patterns  that  have been saved after compiling with an external
1707           set of tables, because the external tables  might  be  at  a  different
1708           address  when  pcre_exec() is called. See the pcreprecompile documenta-
1709           tion for a discussion of saving compiled patterns for later use.
1710    
1711       Option bits for pcre_exec()
1712    
1713           The unused bits of the options argument for pcre_exec() must  be  zero.
1714           The  only  bits  that  may  be set are PCRE_ANCHORED, PCRE_NEWLINE_xxx,
1715           PCRE_NOTBOL,   PCRE_NOTEOL,   PCRE_NOTEMPTY,   PCRE_NO_UTF8_CHECK   and
1716           PCRE_PARTIAL.
1717    
1718             PCRE_ANCHORED
1719    
1720           The  PCRE_ANCHORED  option  limits pcre_exec() to matching at the first
1721           matching position. If a pattern was  compiled  with  PCRE_ANCHORED,  or
1722           turned  out to be anchored by virtue of its contents, it cannot be made
1723           unachored at matching time.
1724    
1725             PCRE_NEWLINE_CR
1726             PCRE_NEWLINE_LF
1727             PCRE_NEWLINE_CRLF
1728             PCRE_NEWLINE_ANY
1729    
1730           These options override  the  newline  definition  that  was  chosen  or
1731           defaulted  when the pattern was compiled. For details, see the descrip-
1732           tion of pcre_compile()  above.  During  matching,  the  newline  choice
1733           affects  the  behaviour  of the dot, circumflex, and dollar metacharac-
1734           ters. It may also alter the way the match position is advanced after  a
1735           match  failure  for  an  unanchored  pattern. When PCRE_NEWLINE_CRLF or
1736           PCRE_NEWLINE_ANY is set, and a match attempt  fails  when  the  current
1737           position  is  at a CRLF sequence, the match position is advanced by two
1738           characters instead of one, in other words, to after the CRLF.
1739    
1740             PCRE_NOTBOL
1741    
1742           This option specifies that first character of the subject string is not
1743           the  beginning  of  a  line, so the circumflex metacharacter should not
1744           match before it. Setting this without PCRE_MULTILINE (at compile  time)
1745           causes  circumflex  never to match. This option affects only the behav-
1746           iour of the circumflex metacharacter. It does not affect \A.
1747    
1748             PCRE_NOTEOL
1749    
1750           This option specifies that the end of the subject string is not the end
1751           of  a line, so the dollar metacharacter should not match it nor (except
1752           in multiline mode) a newline immediately before it. Setting this  with-
1753           out PCRE_MULTILINE (at compile time) causes dollar never to match. This
1754           option affects only the behaviour of the dollar metacharacter. It  does
1755           not affect \Z or \z.
1756    
1757             PCRE_NOTEMPTY
1758    
1759           An empty string is not considered to be a valid match if this option is
1760           set. If there are alternatives in the pattern, they are tried.  If  all
1761           the  alternatives  match  the empty string, the entire match fails. For
1762           example, if the pattern
1763    
1764             a?b?
1765    
1766           is applied to a string not beginning with "a" or "b",  it  matches  the
1767           empty  string at the start of the subject. With PCRE_NOTEMPTY set, this
1768           match is not valid, so PCRE searches further into the string for occur-
1769           rences of "a" or "b".
1770    
1771           Perl has no direct equivalent of PCRE_NOTEMPTY, but it does make a spe-
1772           cial case of a pattern match of the empty  string  within  its  split()
1773           function,  and  when  using  the /g modifier. It is possible to emulate
1774           Perl's behaviour after matching a null string by first trying the match
1775           again at the same offset with PCRE_NOTEMPTY and PCRE_ANCHORED, and then
1776           if that fails by advancing the starting offset (see below)  and  trying
1777           an ordinary match again. There is some code that demonstrates how to do
1778           this in the pcredemo.c sample program.
1779    
1780             PCRE_NO_UTF8_CHECK
1781    
1782           When PCRE_UTF8 is set at compile time, the validity of the subject as a
1783           UTF-8  string is automatically checked when pcre_exec() is subsequently
1784           called.  The value of startoffset is also checked  to  ensure  that  it
1785           points  to the start of a UTF-8 character. If an invalid UTF-8 sequence
1786           of bytes is found, pcre_exec() returns the error PCRE_ERROR_BADUTF8. If
1787           startoffset  contains  an  invalid  value, PCRE_ERROR_BADUTF8_OFFSET is
1788           returned.
1789    
1790           If you already know that your subject is valid, and you  want  to  skip
1791           these    checks    for   performance   reasons,   you   can   set   the
1792           PCRE_NO_UTF8_CHECK option when calling pcre_exec(). You might  want  to
1793           do  this  for the second and subsequent calls to pcre_exec() if you are
1794           making repeated calls to find all  the  matches  in  a  single  subject
1795           string.  However,  you  should  be  sure  that the value of startoffset
1796           points to the start of a UTF-8 character.  When  PCRE_NO_UTF8_CHECK  is
1797           set,  the  effect of passing an invalid UTF-8 string as a subject, or a
1798           value of startoffset that does not point to the start of a UTF-8  char-
1799           acter, is undefined. Your program may crash.
1800    
1801             PCRE_PARTIAL
1802    
1803           This  option  turns  on  the  partial  matching feature. If the subject
1804           string fails to match the pattern, but at some point during the  match-
1805           ing  process  the  end of the subject was reached (that is, the subject
1806           partially matches the pattern and the failure to  match  occurred  only
1807           because  there were not enough subject characters), pcre_exec() returns
1808           PCRE_ERROR_PARTIAL instead of PCRE_ERROR_NOMATCH. When PCRE_PARTIAL  is
1809           used,  there  are restrictions on what may appear in the pattern. These
1810           are discussed in the pcrepartial documentation.
1811    
1812       The string to be matched by pcre_exec()
1813    
1814           The subject string is passed to pcre_exec() as a pointer in subject,  a
1815           length  in  length, and a starting byte offset in startoffset. In UTF-8
1816           mode, the byte offset must point to the start  of  a  UTF-8  character.
1817           Unlike  the  pattern string, the subject may contain binary zero bytes.
1818           When the starting offset is zero, the search for a match starts at  the
1819           beginning of the subject, and this is by far the most common case.
1820    
1821           A  non-zero  starting offset is useful when searching for another match
1822           in the same subject by calling pcre_exec() again after a previous  suc-
1823           cess.   Setting  startoffset differs from just passing over a shortened
1824           string and setting PCRE_NOTBOL in the case of  a  pattern  that  begins
1825           with any kind of lookbehind. For example, consider the pattern
1826    
1827             \Biss\B
1828    
1829           which  finds  occurrences  of "iss" in the middle of words. (\B matches
1830           only if the current position in the subject is not  a  word  boundary.)
1831           When  applied  to the string "Mississipi" the first call to pcre_exec()
1832           finds the first occurrence. If pcre_exec() is called  again  with  just
1833           the  remainder  of  the  subject,  namely  "issipi", it does not match,
1834           because \B is always false at the start of the subject, which is deemed
1835           to  be  a  word  boundary. However, if pcre_exec() is passed the entire
1836           string again, but with startoffset set to 4, it finds the second occur-
1837           rence  of "iss" because it is able to look behind the starting point to
1838           discover that it is preceded by a letter.
1839    
1840           If a non-zero starting offset is passed when the pattern  is  anchored,
1841           one attempt to match at the given offset is made. This can only succeed
1842           if the pattern does not require the match to be at  the  start  of  the
1843           subject.
1844    
1845       How pcre_exec() returns captured substrings
1846    
1847           In  general, a pattern matches a certain portion of the subject, and in
1848           addition, further substrings from the subject  may  be  picked  out  by
1849           parts  of  the  pattern.  Following the usage in Jeffrey Friedl's book,
1850           this is called "capturing" in what follows, and the  phrase  "capturing
1851           subpattern"  is  used for a fragment of a pattern that picks out a sub-
1852           string. PCRE supports several other kinds of  parenthesized  subpattern
1853           that do not cause substrings to be captured.
1854    
1855           Captured  substrings are returned to the caller via a vector of integer
1856           offsets whose address is passed in ovector. The number of  elements  in
1857           the  vector is passed in ovecsize, which must be a non-negative number.
1858           Note: this argument is NOT the size of ovector in bytes.
1859    
1860           The first two-thirds of the vector is used to pass back  captured  sub-
1861           strings,  each  substring using a pair of integers. The remaining third
1862           of the vector is used as workspace by pcre_exec() while  matching  cap-
1863           turing  subpatterns, and is not available for passing back information.
1864           The length passed in ovecsize should always be a multiple of three.  If
1865           it is not, it is rounded down.
1866    
1867           When  a  match  is successful, information about captured substrings is
1868           returned in pairs of integers, starting at the  beginning  of  ovector,
1869           and  continuing  up  to two-thirds of its length at the most. The first
1870           element of a pair is set to the offset of the first character in a sub-
1871           string,  and  the  second  is  set to the offset of the first character
1872           after the end of a substring. The  first  pair,  ovector[0]  and  ovec-
1873           tor[1],  identify  the  portion  of  the  subject string matched by the
1874           entire pattern. The next pair is used for the first  capturing  subpat-
1875           tern, and so on. The value returned by pcre_exec() is one more than the
1876           highest numbered pair that has been set. For example, if two substrings
1877           have  been captured, the returned value is 3. If there are no capturing
1878           subpatterns, the return value from a successful match is 1,  indicating
1879           that just the first pair of offsets has been set.
1880    
1881           If a capturing subpattern is matched repeatedly, it is the last portion
1882           of the string that it matched that is returned.
1883    
1884           If the vector is too small to hold all the captured substring  offsets,
1885           it is used as far as possible (up to two-thirds of its length), and the
1886           function returns a value of zero. In particular, if the substring  off-
1887           sets are not of interest, pcre_exec() may be called with ovector passed
1888           as NULL and ovecsize as zero. However, if  the  pattern  contains  back
1889           references  and  the  ovector is not big enough to remember the related
1890           substrings, PCRE has to get additional memory for use during  matching.
1891           Thus it is usually advisable to supply an ovector.
1892    
1893           The  pcre_info()  function  can  be used to find out how many capturing
1894           subpatterns there are in a compiled  pattern.  The  smallest  size  for
1895           ovector  that  will allow for n captured substrings, in addition to the
1896           offsets of the substring matched by the whole pattern, is (n+1)*3.
1897    
1898           It is possible for capturing subpattern number n+1 to match  some  part
1899           of the subject when subpattern n has not been used at all. For example,
1900           if the string "abc" is matched  against  the  pattern  (a|(z))(bc)  the
1901           return from the function is 4, and subpatterns 1 and 3 are matched, but
1902           2 is not. When this happens, both values in  the  offset  pairs  corre-
1903           sponding to unused subpatterns are set to -1.
1904    
1905           Offset  values  that correspond to unused subpatterns at the end of the
1906           expression are also set to -1. For example,  if  the  string  "abc"  is
1907           matched  against the pattern (abc)(x(yz)?)? subpatterns 2 and 3 are not
1908           matched. The return from the function is 2, because  the  highest  used
1909           capturing subpattern number is 1. However, you can refer to the offsets
1910           for the second and third capturing subpatterns if  you  wish  (assuming
1911           the vector is large enough, of course).
1912    
1913           Some  convenience  functions  are  provided for extracting the captured
1914           substrings as separate strings. These are described below.
1915    
1916       Error return values from pcre_exec()
1917    
1918           If pcre_exec() fails, it returns a negative number. The  following  are
1919           defined in the header file:
1920    
1921             PCRE_ERROR_NOMATCH        (-1)
1922    
1923           The subject string did not match the pattern.
1924    
1925             PCRE_ERROR_NULL           (-2)
1926    
1927           Either  code  or  subject  was  passed as NULL, or ovector was NULL and
1928           ovecsize was not zero.
1929    
1930             PCRE_ERROR_BADOPTION      (-3)
1931    
1932           An unrecognized bit was set in the options argument.
1933    
1934             PCRE_ERROR_BADMAGIC       (-4)
1935    
1936           PCRE stores a 4-byte "magic number" at the start of the compiled  code,
1937           to catch the case when it is passed a junk pointer and to detect when a
1938           pattern that was compiled in an environment of one endianness is run in
1939           an  environment  with the other endianness. This is the error that PCRE
1940           gives when the magic number is not present.
1941    
1942             PCRE_ERROR_UNKNOWN_OPCODE (-5)
1943    
1944           While running the pattern match, an unknown item was encountered in the
1945           compiled  pattern.  This  error  could be caused by a bug in PCRE or by
1946           overwriting of the compiled pattern.
1947    
1948             PCRE_ERROR_NOMEMORY       (-6)
1949    
1950           If a pattern contains back references, but the ovector that  is  passed
1951           to pcre_exec() is not big enough to remember the referenced substrings,
1952           PCRE gets a block of memory at the start of matching to  use  for  this
1953           purpose.  If the call via pcre_malloc() fails, this error is given. The
1954           memory is automatically freed at the end of matching.
1955    
1956             PCRE_ERROR_NOSUBSTRING    (-7)
1957    
1958           This error is used by the pcre_copy_substring(),  pcre_get_substring(),
1959           and  pcre_get_substring_list()  functions  (see  below).  It  is  never
1960           returned by pcre_exec().
1961    
1962             PCRE_ERROR_MATCHLIMIT     (-8)
1963    
1964           The backtracking limit, as specified by  the  match_limit  field  in  a
1965           pcre_extra  structure  (or  defaulted) was reached. See the description
1966           above.
1967    
1968             PCRE_ERROR_CALLOUT        (-9)
1969    
1970           This error is never generated by pcre_exec() itself. It is provided for
1971           use  by  callout functions that want to yield a distinctive error code.
1972           See the pcrecallout documentation for details.
1973    
1974             PCRE_ERROR_BADUTF8        (-10)
1975    
1976           A string that contains an invalid UTF-8 byte sequence was passed  as  a
1977           subject.
1978    
1979             PCRE_ERROR_BADUTF8_OFFSET (-11)
1980    
1981           The UTF-8 byte sequence that was passed as a subject was valid, but the
1982           value of startoffset did not point to the beginning of a UTF-8  charac-
1983           ter.
1984    
1985             PCRE_ERROR_PARTIAL        (-12)
1986    
1987           The  subject  string did not match, but it did match partially. See the
1988           pcrepartial documentation for details of partial matching.
1989    
1990             PCRE_ERROR_BADPARTIAL     (-13)
1991    
1992           The PCRE_PARTIAL option was used with  a  compiled  pattern  containing
1993           items  that are not supported for partial matching. See the pcrepartial
1994           documentation for details of partial matching.
1995    
1996             PCRE_ERROR_INTERNAL       (-14)
1997    
1998           An unexpected internal error has occurred. This error could  be  caused
1999           by a bug in PCRE or by overwriting of the compiled pattern.
2000    
2001             PCRE_ERROR_BADCOUNT       (-15)
2002    
2003           This  error is given if the value of the ovecsize argument is negative.
2004    
2005             PCRE_ERROR_RECURSIONLIMIT (-21)
2006    
2007           The internal recursion limit, as specified by the match_limit_recursion
2008           field  in  a  pcre_extra  structure (or defaulted) was reached. See the
2009           description above.
2010    
2011             PCRE_ERROR_NULLWSLIMIT    (-22)
2012    
2013           When a group that can match an empty  substring  is  repeated  with  an
2014           unbounded  upper  limit, the subject position at the start of the group
2015           must be remembered, so that a test for an empty string can be made when
2016           the  end  of the group is reached. Some workspace is required for this;
2017           if it runs out, this error is given.
2018    
2019             PCRE_ERROR_BADNEWLINE     (-23)
2020    
2021  MATCHING A PATTERN         An invalid combination of PCRE_NEWLINE_xxx options was given.
2022    
2023       int pcre_exec(const pcre *code, const pcre_extra *extra,         Error numbers -16 to -20 are not used by pcre_exec().
           const char *subject, int length, int startoffset,  
           int options, int *ovector, int ovecsize);  
   
      The function pcre_exec() is called to match a subject string  
      against  a pre-compiled pattern, which is passed in the code  
      argument. If the pattern has been studied, the result of the  
      study should be passed in the extra argument.  
   
      Here is an example of a simple call to pcre_exec():  
   
        int rc;  
        int ovector[30];  
        rc = pcre_exec(  
          re,             /* result of pcre_compile() */  
          NULL,           /* we didn't study the pattern */  
          "some string",  /* the subject string */  
          11,             /* the length of the subject string */  
          0,              /* start at offset 0 in the subject */  
          0,              /* default options */  
          ovector,        /* vector for substring information */  
          30);            /* number of elements in the vector */  
   
      If the extra argument is  not  NULL,  it  must  point  to  a  
      pcre_extra  data  block.  The  pcre_study() function returns  
      such a block (when it doesn't return NULL), but you can also  
      create  one for yourself, and pass additional information in  
      it. The fields in the block are as follows:  
   
        unsigned long int flags;  
        void *study_data;  
        unsigned long int match_limit;  
        void *callout_data;  
   
      The flags field is a bitmap  that  specifies  which  of  the  
      other fields are set. The flag bits are:  
   
        PCRE_EXTRA_STUDY_DATA  
        PCRE_EXTRA_MATCH_LIMIT  
        PCRE_EXTRA_CALLOUT_DATA  
   
      Other flag bits should be set to zero. The study_data  field  
      is   set  in  the  pcre_extra  block  that  is  returned  by  
      pcre_study(), together with the appropriate  flag  bit.  You  
      should  not  set this yourself, but you can add to the block  
      by setting the other fields.  
   
      The match_limit field provides a means  of  preventing  PCRE  
      from  using  up a vast amount of resources when running pat-  
      terns that are not going to match, but  which  have  a  very  
      large  number  of  possibilities  in their search trees. The  
      classic example is the  use  of  nested  unlimited  repeats.  
      Internally,  PCRE  uses  a  function called match() which it  
      calls  repeatedly  (sometimes  recursively).  The  limit  is  
      imposed  on the number of times this function is called dur-  
      ing a match, which has the effect of limiting the amount  of  
      recursion and backtracking that can take place. For patterns  
      that are not anchored, the count starts from zero  for  each  
      position in the subject string.  
   
      The default limit for the library can be set  when  PCRE  is  
      built;  the default default is 10 million, which handles all  
      but the most extreme cases. You can reduce  the  default  by  
      suppling  pcre_exec()  with  a  pcre_extra  block  in  which  
      match_limit   is   set   to    a    smaller    value,    and  
      PCRE_EXTRA_MATCH_LIMIT  is  set  in  the flags field. If the  
      limit      is      exceeded,       pcre_exec()       returns  
      PCRE_ERROR_MATCHLIMIT.  
   
      The pcre_callout field is used in conjunction with the "cal-  
      lout"  feature,  which is described in the pcrecallout docu-  
      mentation.  
   
      The PCRE_ANCHORED option can be passed in the options  argu-  
      ment,   whose   unused   bits  must  be  zero.  This  limits  
      pcre_exec() to matching at the first matching position. How-  
      ever,  if  a  pattern  was  compiled  with PCRE_ANCHORED, or  
      turned out to be anchored by virtue of its contents, it can-  
      not be made unachored at matching time.  
   
      There are also three further options that can be set only at  
      matching time:  
   
        PCRE_NOTBOL  
   
      The first character of the string is not the beginning of  a  
      line,  so  the  circumflex  metacharacter  should  not match  
      before it. Setting this without PCRE_MULTILINE  (at  compile  
      time) causes circumflex never to match.  
   
        PCRE_NOTEOL  
   
      The end of the string is not the end of a line, so the  dol-  
      lar  metacharacter should not match it nor (except in multi-  
      line mode) a newline immediately  before  it.  Setting  this  
      without PCRE_MULTILINE (at compile time) causes dollar never  
      to match.  
   
        PCRE_NOTEMPTY  
   
      An empty string is not considered to be  a  valid  match  if  
      this  option  is  set. If there are alternatives in the pat-  
      tern, they are tried. If  all  the  alternatives  match  the  
      empty  string,  the  entire match fails. For example, if the  
      pattern  
   
        a?b?  
   
      is applied to a string not beginning with  "a"  or  "b",  it  
      matches  the  empty string at the start of the subject. With  
      PCRE_NOTEMPTY set, this match is not valid, so PCRE searches  
      further into the string for occurrences of "a" or "b".  
   
      Perl has no direct equivalent of PCRE_NOTEMPTY, but it  does  
      make  a  special case of a pattern match of the empty string  
      within its split() function, and when using the /g modifier.  
      It  is possible to emulate Perl's behaviour after matching a  
      null string by first trying the  match  again  at  the  same  
      offset  with  PCRE_NOTEMPTY  set,  and then if that fails by  
      advancing the starting offset  (see  below)  and  trying  an  
      ordinary match again.  
   
      The subject string is passed to pcre_exec() as a pointer  in  
      subject,  a length in length, and a starting offset in star-  
      toffset. Unlike the pattern string, the subject may  contain  
      binary  zero  bytes.  When  the starting offset is zero, the  
      search for a match starts at the beginning of  the  subject,  
      and this is by far the most common case.  
   
      If the pattern was compiled with the PCRE_UTF8  option,  the  
      subject  must  be  a sequence of bytes that is a valid UTF-8  
      string.  If  an  invalid  UTF-8  string  is  passed,  PCRE's  
      behaviour is not defined.  
   
      A non-zero starting offset  is  useful  when  searching  for  
      another  match  in  the  same subject by calling pcre_exec()  
      again after a previous success.  Setting startoffset differs  
      from  just  passing  over  a  shortened  string  and setting  
      PCRE_NOTBOL in the case of a pattern that  begins  with  any  
      kind of lookbehind. For example, consider the pattern  
   
        \Biss\B  
   
      which finds occurrences of "iss" in the middle of words. (\B  
      matches only if the current position in the subject is not a  
      word boundary.) When applied to the string "Mississipi"  the  
      first  call  to  pcre_exec()  finds the first occurrence. If  
      pcre_exec() is called again with just the remainder  of  the  
      subject,  namely  "issipi", it does not match, because \B is  
      always false at the start of the subject, which is deemed to  
      be  a  word  boundary. However, if pcre_exec() is passed the  
      entire string again, but with startoffset set to 4, it finds  
      the  second  occurrence  of "iss" because it is able to look  
      behind the starting point to discover that it is preceded by  
      a letter.  
   
      If a non-zero starting offset is passed when the pattern  is  
      anchored, one attempt to match at the given offset is tried.  
      This can only succeed if the pattern does  not  require  the  
      match to be at the start of the subject.  
   
      In general, a pattern matches a certain portion of the  sub-  
      ject,  and  in addition, further substrings from the subject  
      may be picked out by parts of  the  pattern.  Following  the  
      usage  in  Jeffrey Friedl's book, this is called "capturing"  
      in what follows, and the phrase  "capturing  subpattern"  is  
      used for a fragment of a pattern that picks out a substring.  
      PCRE supports several other kinds of  parenthesized  subpat-  
      tern that do not cause substrings to be captured.  
   
      Captured substrings are returned to the caller via a  vector  
      of  integer  offsets whose address is passed in ovector. The  
      number of elements in the vector is passed in ovecsize.  The  
      first two-thirds of the vector is used to pass back captured  
      substrings, each substring using a  pair  of  integers.  The  
      remaining  third  of  the  vector  is  used  as workspace by  
      pcre_exec() while matching capturing subpatterns, and is not  
      available for passing back information. The length passed in  
      ovecsize should always be a multiple of three. If it is not,  
      it is rounded down.  
   
      When a match has been successful, information about captured  
      substrings is returned in pairs of integers, starting at the  
      beginning of ovector, and continuing up to two-thirds of its  
      length  at  the  most. The first element of a pair is set to  
      the offset of the first character in a  substring,  and  the  
      second is set to the offset of the first character after the  
      end of a substring. The first  pair,  ovector[0]  and  ovec-  
      tor[1],  identify  the portion of the subject string matched  
      by the entire pattern. The next pair is used for  the  first  
      capturing  subpattern,  and  so  on.  The  value returned by  
      pcre_exec() is the number of pairs that have  been  set.  If  
      there  are no capturing subpatterns, the return value from a  
      successful match is 1, indicating that just the  first  pair  
      of offsets has been set.  
   
      Some convenience functions are provided for  extracting  the  
      captured substrings as separate strings. These are described  
      in the following section.  
   
      It is possible for an capturing  subpattern  number  n+1  to  
      match  some  part  of  the subject when subpattern n has not  
      been used at all.  For  example,  if  the  string  "abc"  is  
      matched  against the pattern (a|(z))(bc) subpatterns 1 and 3  
      are matched, but 2 is not. When this  happens,  both  offset  
      values corresponding to the unused subpattern are set to -1.  
   
      If a capturing subpattern is matched repeatedly, it  is  the  
      last  portion  of  the  string  that  it  matched  that gets  
      returned.  
   
      If the vector is too small to hold  all  the  captured  sub-  
      strings,  it is used as far as possible (up to two-thirds of  
      its length), and the function returns a value  of  zero.  In  
      particular,  if  the  substring offsets are not of interest,  
      pcre_exec() may be called with ovector passed  as  NULL  and  
      ovecsize  as  zero.  However,  if  the pattern contains back  
      references and the ovector isn't big enough to remember  the  
      related  substrings,  PCRE  has to get additional memory for  
      use during matching. Thus it is usually advisable to  supply  
      an ovector.  
   
      Note that pcre_info() can be used to find out how many  cap-  
      turing  subpatterns  there  are  in  a compiled pattern. The  
      smallest size for ovector that will  allow  for  n  captured  
      substrings,  in  addition  to  the  offsets of the substring  
      matched by the whole pattern, is (n+1)*3.  
   
      If pcre_exec() fails, it returns a negative number. The fol-  
      lowing are defined in the header file:  
   
        PCRE_ERROR_NOMATCH        (-1)  
   
      The subject string did not match the pattern.  
   
        PCRE_ERROR_NULL           (-2)  
   
      Either code or subject was passed as NULL,  or  ovector  was  
      NULL and ovecsize was not zero.  
   
        PCRE_ERROR_BADOPTION      (-3)  
   
      An unrecognized bit was set in the options argument.  
   
        PCRE_ERROR_BADMAGIC       (-4)  
   
      PCRE stores a 4-byte "magic number" at the start of the com-  
      piled  code,  to  catch  the  case  when it is passed a junk  
      pointer. This is the error it gives when  the  magic  number  
      isn't present.  
   
        PCRE_ERROR_UNKNOWN_NODE   (-5)  
   
      While running the pattern match, an unknown item was encoun-  
      tered in the compiled pattern. This error could be caused by  
      a bug in PCRE or by overwriting of the compiled pattern.  
   
        PCRE_ERROR_NOMEMORY       (-6)  
   
      If a pattern contains back references, but the ovector  that  
      is  passed  to pcre_exec() is not big enough to remember the  
      referenced substrings, PCRE gets a block of  memory  at  the  
      start  of  matching to use for this purpose. If the call via  
      pcre_malloc() fails, this error  is  given.  The  memory  is  
      freed at the end of matching.  
   
        PCRE_ERROR_NOSUBSTRING    (-7)  
   
      This   error   is   used   by   the   pcre_copy_substring(),  
      pcre_get_substring(),  and  pcre_get_substring_list()  func-  
      tions (see below). It is never returned by pcre_exec().  
   
        PCRE_ERROR_MATCHLIMIT     (-8)  
   
      The recursion and backtracking limit, as  specified  by  the  
      match_limit  field  in a pcre_extra structure (or defaulted)  
      was reached. See the description above.  
   
        PCRE_ERROR_CALLOUT        (-9)  
   
      This error is never generated by pcre_exec() itself.  It  is  
      provided  for  use by callout functions that want to yield a  
      distinctive error code. See  the  pcrecallout  documentation  
      for details.  
2024    
2025    
2026  EXTRACTING CAPTURED SUBSTRINGS BY NUMBER  EXTRACTING CAPTURED SUBSTRINGS BY NUMBER
2027    
2028       int pcre_copy_substring(const char *subject, int *ovector,         int pcre_copy_substring(const char *subject, int *ovector,
2029            int stringcount, int stringnumber, char *buffer,              int stringcount, int stringnumber, char *buffer,
2030            int buffersize);              int buffersize);
2031    
2032       int pcre_get_substring(const char *subject, int *ovector,         int pcre_get_substring(const char *subject, int *ovector,
2033            int stringcount, int stringnumber,              int stringcount, int stringnumber,
2034            const char **stringptr);              const char **stringptr);
2035    
2036       int pcre_get_substring_list(const char *subject,         int pcre_get_substring_list(const char *subject,
2037            int *ovector, int stringcount, const char ***listptr);              int *ovector, int stringcount, const char ***listptr);
2038    
2039       Captured substrings can be accessed directly  by  using  the         Captured substrings can be  accessed  directly  by  using  the  offsets
2040       offsets returned by pcre_exec() in ovector. For convenience,         returned  by  pcre_exec()  in  ovector.  For convenience, the functions
2041       the functions  pcre_copy_substring(),  pcre_get_substring(),         pcre_copy_substring(),    pcre_get_substring(),    and    pcre_get_sub-
2042       and  pcre_get_substring_list()  are  provided for extracting         string_list()  are  provided for extracting captured substrings as new,
2043       captured  substrings  as  new,   separate,   zero-terminated         separate, zero-terminated strings. These functions identify  substrings
2044       strings.  These functions identify substrings by number. The         by  number.  The  next section describes functions for extracting named
2045       next section describes functions for extracting  named  sub-         substrings.
2046       strings.   A  substring  that  contains  a  binary  zero  is  
2047       correctly extracted and has a further zero added on the end,         A substring that contains a binary zero is correctly extracted and  has
2048       but the result is not, of course, a C string.         a  further zero added on the end, but the result is not, of course, a C
2049           string.  However, you can process such a string  by  referring  to  the
2050       The first three arguments are the  same  for  all  three  of         length  that  is  returned  by  pcre_copy_substring() and pcre_get_sub-
2051       these  functions:   subject  is the subject string which has         string().  Unfortunately, the interface to pcre_get_substring_list() is
2052       just been successfully matched, ovector is a pointer to  the         not  adequate for handling strings containing binary zeros, because the
2053       vector  of  integer  offsets that was passed to pcre_exec(),         end of the final string is not independently indicated.
2054       and stringcount is the number of substrings that  were  cap-  
2055       tured by the match, including the substring that matched the         The first three arguments are the same for all  three  of  these  func-
2056       entire regular expression. This is  the  value  returned  by         tions:  subject  is  the subject string that has just been successfully
2057       pcre_exec  if  it  is  greater  than  zero.  If  pcre_exec()         matched, ovector is a pointer to the vector of integer offsets that was
2058       returned zero, indicating that it ran out of space in  ovec-         passed to pcre_exec(), and stringcount is the number of substrings that
2059       tor,  the  value passed as stringcount should be the size of         were captured by the match, including the substring  that  matched  the
2060       the vector divided by three.         entire regular expression. This is the value returned by pcre_exec() if
2061           it is greater than zero. If pcre_exec() returned zero, indicating  that
2062       The functions pcre_copy_substring() and pcre_get_substring()         it  ran out of space in ovector, the value passed as stringcount should
2063       extract a single substring, whose number is given as string-         be the number of elements in the vector divided by three.
2064       number. A value of zero extracts the substring that  matched  
2065       the entire pattern, while higher values extract the captured         The functions pcre_copy_substring() and pcre_get_substring() extract  a
2066       substrings. For pcre_copy_substring(), the string is  placed         single  substring,  whose  number  is given as stringnumber. A value of
2067       in  buffer,  whose  length is given by buffersize, while for         zero extracts the substring that matched the  entire  pattern,  whereas
2068       pcre_get_substring() a new block of memory is  obtained  via         higher  values  extract  the  captured  substrings.  For pcre_copy_sub-
2069       pcre_malloc,  and its address is returned via stringptr. The         string(), the string is placed in buffer,  whose  length  is  given  by
2070       yield of the function is  the  length  of  the  string,  not         buffersize,  while  for  pcre_get_substring()  a new block of memory is
2071       including the terminating zero, or one of         obtained via pcre_malloc, and its address is  returned  via  stringptr.
2072           The  yield  of  the function is the length of the string, not including
2073         PCRE_ERROR_NOMEMORY       (-6)         the terminating zero, or one of these error codes:
2074    
2075       The buffer was too small for pcre_copy_substring(),  or  the           PCRE_ERROR_NOMEMORY       (-6)
2076       attempt to get memory failed for pcre_get_substring().  
2077           The buffer was too small for pcre_copy_substring(), or the  attempt  to
2078         PCRE_ERROR_NOSUBSTRING    (-7)         get memory failed for pcre_get_substring().
2079    
2080       There is no substring whose number is stringnumber.           PCRE_ERROR_NOSUBSTRING    (-7)
2081    
2082       The pcre_get_substring_list() function extracts  all  avail-         There is no substring whose number is stringnumber.
2083       able  substrings  and builds a list of pointers to them. All  
2084       this is done in a single block of memory which  is  obtained         The  pcre_get_substring_list()  function  extracts  all  available sub-
2085       via pcre_malloc. The address of the memory block is returned         strings and builds a list of pointers to them. All this is  done  in  a
2086       via listptr, which is also the start of the list  of  string         single block of memory that is obtained via pcre_malloc. The address of
2087       pointers.  The  end of the list is marked by a NULL pointer.         the memory block is returned via listptr, which is also  the  start  of
2088       The yield of the function is zero if all went well, or         the  list  of  string pointers. The end of the list is marked by a NULL
2089           pointer. The yield of the function is zero if all  went  well,  or  the
2090         PCRE_ERROR_NOMEMORY       (-6)         error code
2091    
2092       if the attempt to get the memory block failed.           PCRE_ERROR_NOMEMORY       (-6)
2093    
2094       When any of these functions encounter a  substring  that  is         if the attempt to get the memory block failed.
2095       unset, which can happen when capturing subpattern number n+1  
2096       matches some part of the subject, but subpattern n  has  not         When  any of these functions encounter a substring that is unset, which
2097       been  used  at all, they return an empty string. This can be         can happen when capturing subpattern number n+1 matches  some  part  of
2098       distinguished  from  a  genuine  zero-length  substring   by         the  subject, but subpattern n has not been used at all, they return an
2099       inspecting the appropriate offset in ovector, which is nega-         empty string. This can be distinguished from a genuine zero-length sub-
2100       tive for unset substrings.         string  by inspecting the appropriate offset in ovector, which is nega-
2101           tive for unset substrings.
2102       The  two  convenience  functions  pcre_free_substring()  and  
2103       pcre_free_substring_list()  can  be  used to free the memory         The two convenience functions pcre_free_substring() and  pcre_free_sub-
2104       returned by  a  previous  call  of  pcre_get_substring()  or         string_list()  can  be  used  to free the memory returned by a previous
2105       pcre_get_substring_list(),  respectively.  They  do  nothing         call  of  pcre_get_substring()  or  pcre_get_substring_list(),  respec-
2106       more than call the function pointed to by  pcre_free,  which         tively.  They  do  nothing  more  than  call the function pointed to by
2107       of  course  could  be called directly from a C program. How-         pcre_free, which of course could be called directly from a  C  program.
2108       ever, PCRE is used in some situations where it is linked via         However,  PCRE is used in some situations where it is linked via a spe-
2109       a  special  interface  to another programming language which         cial  interface  to  another  programming  language  that  cannot   use
2110       cannot use pcre_free directly; it is for  these  cases  that         pcre_free  directly;  it is for these cases that the functions are pro-
2111       the functions are provided.         vided.
2112    
2113    
2114  EXTRACTING CAPTURED SUBSTRINGS BY NAME  EXTRACTING CAPTURED SUBSTRINGS BY NAME
2115    
2116       int pcre_copy_named_substring(const pcre *code,         int pcre_get_stringnumber(const pcre *code,
2117            const char *subject, int *ovector,              const char *name);
2118            int stringcount, const char *stringname,  
2119            char *buffer, int buffersize);         int pcre_copy_named_substring(const pcre *code,
2120                const char *subject, int *ovector,
2121       int pcre_get_stringnumber(const pcre *code,              int stringcount, const char *stringname,
2122            const char *name);              char *buffer, int buffersize);
2123    
2124       int pcre_get_named_substring(const pcre *code,         int pcre_get_named_substring(const pcre *code,
2125            const char *subject, int *ovector,              const char *subject, int *ovector,
2126            int stringcount, const char *stringname,              int stringcount, const char *stringname,
2127            const char **stringptr);              const char **stringptr);
2128    
2129       To extract a substring by name, you first have to find asso-         To extract a substring by name, you first have to find associated  num-
2130       ciated    number.    This    can    be   done   by   calling         ber.  For example, for this pattern
2131       pcre_get_stringnumber(). The first argument is the  compiled  
2132       pattern,  and  the second is the name. For example, for this           (a+)b(?<xxx>\d+)...
2133       pattern  
2134           the number of the subpattern called "xxx" is 2. If the name is known to
2135         ab(?<xxx>\d+)...         be unique (PCRE_DUPNAMES was not set), you can find the number from the
2136           name by calling pcre_get_stringnumber(). The first argument is the com-
2137       the number of the subpattern called "xxx" is  1.  Given  the         piled pattern, and the second is the name. The yield of the function is
2138       number,  you can then extract the substring directly, or use         the  subpattern  number,  or PCRE_ERROR_NOSUBSTRING (-7) if there is no
2139       one of the functions described in the previous section.  For         subpattern of that name.
2140       convenience,  there are also two functions that do the whole  
2141       job.         Given the number, you can extract the substring directly, or use one of
2142           the functions described in the previous section. For convenience, there
2143       Most of the  arguments  of  pcre_copy_named_substring()  and         are also two functions that do the whole job.
2144       pcre_get_named_substring()  are  the  same  as those for the  
2145       functions that  extract  by  number,  and  so  are  not  re-         Most   of   the   arguments    of    pcre_copy_named_substring()    and
2146       described here. There are just two differences.         pcre_get_named_substring()  are  the  same  as  those for the similarly
2147           named functions that extract by number. As these are described  in  the
2148       First, instead of a substring number, a  substring  name  is         previous  section,  they  are not re-described here. There are just two
2149       given.  Second,  there  is  an  extra argument, given at the         differences:
2150       start, which is a pointer to the compiled pattern.  This  is  
2151       needed  in order to gain access to the name-to-number trans-         First, instead of a substring number, a substring name is  given.  Sec-
2152       lation table.         ond, there is an extra argument, given at the start, which is a pointer
2153           to the compiled pattern. This is needed in order to gain access to  the
2154       These functions  call  pcre_get_stringnumber(),  and  if  it         name-to-number translation table.
2155       succeeds,    they   then   call   pcre_copy_substring()   or  
2156       pcre_get_substring(), as appropriate.         These  functions call pcre_get_stringnumber(), and if it succeeds, they
2157           then call pcre_copy_substring() or pcre_get_substring(),  as  appropri-
2158           ate.  NOTE:  If PCRE_DUPNAMES is set and there are duplicate names, the
2159           behaviour may not be what you want (see the next section).
2160    
2161    
2162    DUPLICATE SUBPATTERN NAMES
2163    
2164           int pcre_get_stringtable_entries(const pcre *code,
2165                const char *name, char **first, char **last);
2166    
2167           When a pattern is compiled with the  PCRE_DUPNAMES  option,  names  for
2168           subpatterns  are  not  required  to  be unique. Normally, patterns with
2169           duplicate names are such that in any one match, only one of  the  named
2170           subpatterns  participates. An example is shown in the pcrepattern docu-
2171           mentation. When duplicates are present, pcre_copy_named_substring() and
2172           pcre_get_named_substring()  return the first substring corresponding to
2173           the given name that is set.  If  none  are  set,  an  empty  string  is
2174           returned.  The pcre_get_stringnumber() function returns one of the num-
2175           bers that are associated with the name, but it is not defined which  it
2176           is.
2177    
2178           If  you want to get full details of all captured substrings for a given
2179           name, you must use  the  pcre_get_stringtable_entries()  function.  The
2180           first argument is the compiled pattern, and the second is the name. The
2181           third and fourth are pointers to variables which  are  updated  by  the
2182           function. After it has run, they point to the first and last entries in
2183           the name-to-number table  for  the  given  name.  The  function  itself
2184           returns  the  length  of  each entry, or PCRE_ERROR_NOSUBSTRING (-7) if
2185           there are none. The format of the table is described above in the  sec-
2186           tion  entitled  Information  about  a  pattern.  Given all the relevant
2187           entries for the name, you can extract each of their numbers, and  hence
2188           the captured data, if any.
2189    
2190    
2191    FINDING ALL POSSIBLE MATCHES
2192    
2193           The  traditional  matching  function  uses a similar algorithm to Perl,
2194           which stops when it finds the first match, starting at a given point in
2195           the  subject.  If you want to find all possible matches, or the longest
2196           possible match, consider using the alternative matching  function  (see
2197           below)  instead.  If you cannot use the alternative function, but still
2198           need to find all possible matches, you can kludge it up by  making  use
2199           of the callout facility, which is described in the pcrecallout documen-
2200           tation.
2201    
2202           What you have to do is to insert a callout right at the end of the pat-
2203           tern.   When your callout function is called, extract and save the cur-
2204           rent matched substring. Then return  1,  which  forces  pcre_exec()  to
2205           backtrack  and  try other alternatives. Ultimately, when it runs out of
2206           matches, pcre_exec() will yield PCRE_ERROR_NOMATCH.
2207    
2208    
2209    MATCHING A PATTERN: THE ALTERNATIVE FUNCTION
2210    
2211           int pcre_dfa_exec(const pcre *code, const pcre_extra *extra,
2212                const char *subject, int length, int startoffset,
2213                int options, int *ovector, int ovecsize,
2214                int *workspace, int wscount);
2215    
2216           The function pcre_dfa_exec()  is  called  to  match  a  subject  string
2217           against  a  compiled pattern, using a matching algorithm that scans the
2218           subject string just once, and does not backtrack.  This  has  different
2219           characteristics  to  the  normal  algorithm, and is not compatible with
2220           Perl. Some of the features of PCRE patterns are not  supported.  Never-
2221           theless,  there are times when this kind of matching can be useful. For
2222           a discussion of the two matching algorithms, see the pcrematching docu-
2223           mentation.
2224    
2225           The  arguments  for  the  pcre_dfa_exec()  function are the same as for
2226           pcre_exec(), plus two extras. The ovector argument is used in a differ-
2227           ent  way,  and  this is described below. The other common arguments are
2228           used in the same way as for pcre_exec(), so their  description  is  not
2229           repeated here.
2230    
2231           The  two  additional  arguments provide workspace for the function. The
2232           workspace vector should contain at least 20 elements. It  is  used  for
2233           keeping  track  of  multiple  paths  through  the  pattern  tree.  More
2234           workspace will be needed for patterns and subjects where  there  are  a
2235           lot of potential matches.
2236    
2237           Here is an example of a simple call to pcre_dfa_exec():
2238    
2239             int rc;
2240             int ovector[10];
2241             int wspace[20];
2242             rc = pcre_dfa_exec(
2243               re,             /* result of pcre_compile() */
2244               NULL,           /* we didn't study the pattern */
2245               "some string",  /* the subject string */
2246               11,             /* the length of the subject string */
2247               0,              /* start at offset 0 in the subject */
2248               0,              /* default options */
2249               ovector,        /* vector of integers for substring information */
2250               10,             /* number of elements (NOT size in bytes) */
2251               wspace,         /* working space vector */
2252               20);            /* number of elements (NOT size in bytes) */
2253    
2254       Option bits for pcre_dfa_exec()
2255    
2256           The  unused  bits  of  the options argument for pcre_dfa_exec() must be
2257           zero. The only bits  that  may  be  set  are  PCRE_ANCHORED,  PCRE_NEW-
2258           LINE_xxx,  PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, PCRE_NO_UTF8_CHECK,
2259           PCRE_PARTIAL, PCRE_DFA_SHORTEST, and PCRE_DFA_RESTART. All but the last
2260           three of these are the same as for pcre_exec(), so their description is
2261           not repeated here.
2262    
2263             PCRE_PARTIAL
2264    
2265           This has the same general effect as it does for  pcre_exec(),  but  the
2266           details   are   slightly   different.  When  PCRE_PARTIAL  is  set  for
2267           pcre_dfa_exec(), the return code PCRE_ERROR_NOMATCH is  converted  into
2268           PCRE_ERROR_PARTIAL  if  the  end  of the subject is reached, there have
2269           been no complete matches, but there is still at least one matching pos-
2270           sibility.  The portion of the string that provided the partial match is
2271           set as the first matching string.
2272    
2273             PCRE_DFA_SHORTEST
2274    
2275           Setting the PCRE_DFA_SHORTEST option causes the matching  algorithm  to
2276           stop as soon as it has found one match. Because of the way the alterna-
2277           tive algorithm works, this is necessarily the shortest  possible  match
2278           at the first possible matching point in the subject string.
2279    
2280             PCRE_DFA_RESTART
2281    
2282           When  pcre_dfa_exec()  is  called  with  the  PCRE_PARTIAL  option, and
2283           returns a partial match, it is possible to call it  again,  with  addi-
2284           tional  subject  characters,  and have it continue with the same match.
2285           The PCRE_DFA_RESTART option requests this action; when it is  set,  the
2286           workspace  and wscount options must reference the same vector as before
2287           because data about the match so far is left in  them  after  a  partial
2288           match.  There  is  more  discussion of this facility in the pcrepartial
2289           documentation.
2290    
2291       Successful returns from pcre_dfa_exec()
2292    
2293           When pcre_dfa_exec() succeeds, it may have matched more than  one  sub-
2294           string in the subject. Note, however, that all the matches from one run
2295           of the function start at the same point in  the  subject.  The  shorter
2296           matches  are all initial substrings of the longer matches. For example,
2297           if the pattern
2298    
2299             <.*>
2300    
2301           is matched against the string
2302    
2303             This is <something> <something else> <something further> no more
2304    
2305           the three matched strings are
2306    
2307             <something>
2308             <something> <something else>
2309             <something> <something else> <something further>
2310    
2311           On success, the yield of the function is a number  greater  than  zero,
2312           which  is  the  number of matched substrings. The substrings themselves
2313           are returned in ovector. Each string uses two elements;  the  first  is
2314           the  offset  to  the start, and the second is the offset to the end. In
2315           fact, all the strings have the same start  offset.  (Space  could  have
2316           been  saved by giving this only once, but it was decided to retain some
2317           compatibility with the way pcre_exec() returns data,  even  though  the
2318           meaning of the strings is different.)
2319    
2320           The strings are returned in reverse order of length; that is, the long-
2321           est matching string is given first. If there were too many  matches  to
2322           fit  into ovector, the yield of the function is zero, and the vector is
2323           filled with the longest matches.
2324    
2325       Error returns from pcre_dfa_exec()
2326    
2327           The pcre_dfa_exec() function returns a negative number when  it  fails.
2328           Many  of  the  errors  are  the  same as for pcre_exec(), and these are
2329           described above.  There are in addition the following errors  that  are
2330           specific to pcre_dfa_exec():
2331    
2332             PCRE_ERROR_DFA_UITEM      (-16)
2333    
2334           This  return is given if pcre_dfa_exec() encounters an item in the pat-
2335           tern that it does not support, for instance, the use of \C  or  a  back
2336           reference.
2337    
2338             PCRE_ERROR_DFA_UCOND      (-17)
2339    
2340           This  return  is  given  if pcre_dfa_exec() encounters a condition item
2341           that uses a back reference for the condition, or a test  for  recursion
2342           in a specific group. These are not supported.
2343    
2344             PCRE_ERROR_DFA_UMLIMIT    (-18)
2345    
2346           This  return  is given if pcre_dfa_exec() is called with an extra block
2347           that contains a setting of the match_limit field. This is not supported
2348           (it is meaningless).
2349    
2350             PCRE_ERROR_DFA_WSSIZE     (-19)
2351    
2352           This  return  is  given  if  pcre_dfa_exec()  runs  out of space in the
2353           workspace vector.
2354    
2355             PCRE_ERROR_DFA_RECURSE    (-20)
2356    
2357           When a recursive subpattern is processed, the matching  function  calls
2358           itself  recursively,  using  private vectors for ovector and workspace.
2359           This error is given if the output vector  is  not  large  enough.  This
2360           should be extremely rare, as a vector of size 1000 is used.
2361    
2362    
2363    SEE ALSO
2364    
2365           pcrebuild(3),  pcrecallout(3), pcrecpp(3)(3), pcrematching(3), pcrepar-
2366           tial(3), pcreposix(3), pcreprecompile(3), pcresample(3),  pcrestack(3).
2367    
2368    
2369    AUTHOR
2370    
2371           Philip Hazel
2372           University Computing Service
2373           Cambridge CB2 3QH, England.
2374    
2375    
2376    REVISION
2377    
2378           Last updated: 06 March 2007
2379           Copyright (c) 1997-2007 University of Cambridge.
2380    ------------------------------------------------------------------------------
2381    
2382    
2383    PCRECALLOUT(3)                                                  PCRECALLOUT(3)
2384    
 Last updated: 03 February 2003  
 Copyright (c) 1997-2003 University of Cambridge.  
 -----------------------------------------------------------------------------  
2385    
2386  NAME  NAME
2387       PCRE - Perl-compatible regular expressions         PCRE - Perl-compatible regular expressions
2388    
2389    
2390  PCRE CALLOUTS  PCRE CALLOUTS
2391    
2392       int (*pcre_callout)(pcre_callout_block *);         int (*pcre_callout)(pcre_callout_block *);
   
      PCRE provides a feature called "callout", which is  a  means  
      of  temporarily passing control to the caller of PCRE in the  
      middle of pattern matching. The caller of PCRE  provides  an  
      external  function  by putting its entry point in the global  
      variable pcre_callout. By default,  this  variable  contains  
      NULL, which disables all calling out.  
   
      Within a regular expression, (?C) indicates  the  points  at  
      which  the external function is to be called. Different cal-  
      lout points can be identified by putting a number less  than  
      256  after  the  letter  C.  The default value is zero.  For  
      example, this pattern has two callout points:  
   
        (?C1)9abc(?C2)def  
   
      During matching, when PCRE  reaches  a  callout  point  (and  
      pcre_callout  is  set), the external function is called. Its  
      only argument is a pointer to  a  pcre_callout  block.  This  
      contains the following variables:  
   
        int          version;  
        int          callout_number;  
        int         *offset_vector;  
        const char  *subject;  
        int          subject_length;  
        int          start_match;  
        int          current_position;  
        int          capture_top;  
        int          capture_last;  
        void        *callout_data;  
   
      The version field  is  an  integer  containing  the  version  
      number of the block format. The current version is zero. The  
      version number may change in future if additional fields are  
      added,  but  the  intention  is  never  to remove any of the  
      existing fields.  
   
      The callout_number field contains the number of the callout,  
      as compiled into the pattern (that is, the number after ?C).  
   
      The offset_vector field  is  a  pointer  to  the  vector  of  
      offsets  that  was  passed by the caller to pcre_exec(). The  
      contents can be inspected in  order  to  extract  substrings  
      that  have  been  matched  so  far,  in  the same way as for  
      extracting substrings after a match has completed.  
      The subject and subject_length  fields  contain  copies  the  
      values that were passed to pcre_exec().  
   
      The start_match field contains the offset within the subject  
      at  which  the current match attempt started. If the pattern  
      is not anchored, the callout function may be called  several  
      times for different starting points.  
   
      The current_position field contains the  offset  within  the  
      subject of the current match pointer.  
   
      The capture_top field contains the  number  of  the  highest  
      captured substring so far.  
   
      The capture_last field  contains  the  number  of  the  most  
      recently captured substring.  
   
      The callout_data field contains a value that  is  passed  to  
      pcre_exec()  by  the  caller  specifically so that it can be  
      passed back in callouts. It is passed  in  the  pcre_callout  
      field  of the pcre_extra data structure. If no such data was  
      passed, the value of callout_data in a pcre_callout block is  
      NULL.  There is a description of the pcre_extra structure in  
      the pcreapi documentation.  
2393    
2394           PCRE provides a feature called "callout", which is a means of temporar-
2395           ily passing control to the caller of PCRE  in  the  middle  of  pattern
2396           matching.  The  caller of PCRE provides an external function by putting
2397           its entry point in the global variable pcre_callout. By  default,  this
2398           variable contains NULL, which disables all calling out.
2399    
2400           Within  a  regular  expression,  (?C) indicates the points at which the
2401           external function is to be called.  Different  callout  points  can  be
2402           identified  by  putting  a number less than 256 after the letter C. The
2403           default value is zero.  For  example,  this  pattern  has  two  callout
2404           points:
2405    
2406             (?C1)eabc(?C2)def
2407    
2408           If  the  PCRE_AUTO_CALLOUT  option  bit  is  set when pcre_compile() is
2409           called, PCRE automatically  inserts  callouts,  all  with  number  255,
2410           before  each  item in the pattern. For example, if PCRE_AUTO_CALLOUT is
2411           used with the pattern
2412    
2413             A(\d{2}|--)
2414    
2415           it is processed as if it were
2416    
2417           (?C255)A(?C255)((?C255)\d{2}(?C255)|(?C255)-(?C255)-(?C255))(?C255)
2418    
2419           Notice that there is a callout before and after  each  parenthesis  and
2420           alternation  bar.  Automatic  callouts  can  be  used  for tracking the
2421           progress of pattern matching. The pcretest command has an  option  that
2422           sets  automatic callouts; when it is used, the output indicates how the
2423           pattern is matched. This is useful information when you are  trying  to
2424           optimize the performance of a particular pattern.
2425    
2426    
2427    MISSING CALLOUTS
2428    
2429           You  should  be  aware  that,  because of optimizations in the way PCRE
2430           matches patterns, callouts sometimes do not happen. For example, if the
2431           pattern is
2432    
2433             ab(?C4)cd
2434    
2435           PCRE knows that any matching string must contain the letter "d". If the
2436           subject string is "abyz", the lack of "d" means that  matching  doesn't
2437           ever  start,  and  the  callout is never reached. However, with "abyd",
2438           though the result is still no match, the callout is obeyed.
2439    
2440    
2441    THE CALLOUT INTERFACE
2442    
2443           During matching, when PCRE reaches a callout point, the external  func-
2444           tion  defined by pcre_callout is called (if it is set). This applies to
2445           both the pcre_exec() and the pcre_dfa_exec()  matching  functions.  The
2446           only  argument  to  the callout function is a pointer to a pcre_callout
2447           block. This structure contains the following fields:
2448    
2449             int          version;
2450             int          callout_number;
2451             int         *offset_vector;
2452             const char  *subject;
2453             int          subject_length;
2454             int          start_match;
2455             int          current_position;
2456             int          capture_top;
2457             int          capture_last;
2458             void        *callout_data;
2459             int          pattern_position;
2460             int          next_item_length;
2461    
2462           The version field is an integer containing the version  number  of  the
2463           block  format. The initial version was 0; the current version is 1. The
2464           version number will change again in future  if  additional  fields  are
2465           added, but the intention is never to remove any of the existing fields.
2466    
2467           The callout_number field contains the number of the  callout,  as  com-
2468           piled  into  the pattern (that is, the number after ?C for manual call-
2469           outs, and 255 for automatically generated callouts).
2470    
2471           The offset_vector field is a pointer to the vector of offsets that  was
2472           passed   by   the   caller  to  pcre_exec()  or  pcre_dfa_exec().  When
2473           pcre_exec() is used, the contents can be inspected in order to  extract
2474           substrings  that  have  been  matched  so  far,  in the same way as for
2475           extracting substrings after a match has completed. For  pcre_dfa_exec()
2476           this field is not useful.
2477    
2478           The subject and subject_length fields contain copies of the values that
2479           were passed to pcre_exec().
2480    
2481           The start_match field contains the offset within the subject  at  which
2482           the  current match attempt started. If the pattern is not anchored, the
2483           callout function may be called several times from the same point in the
2484           pattern for different starting points in the subject.
2485    
2486           The  current_position  field  contains the offset within the subject of
2487           the current match pointer.
2488    
2489           When the pcre_exec() function is used, the capture_top  field  contains
2490           one  more than the number of the highest numbered captured substring so
2491           far. If no substrings have been captured, the value of  capture_top  is
2492           one.  This  is always the case when pcre_dfa_exec() is used, because it
2493           does not support captured substrings.
2494    
2495           The capture_last field contains the number of the  most  recently  cap-
2496           tured  substring. If no substrings have been captured, its value is -1.
2497           This is always the case when pcre_dfa_exec() is used.
2498    
2499           The callout_data field contains a value that is passed  to  pcre_exec()
2500           or  pcre_dfa_exec() specifically so that it can be passed back in call-
2501           outs. It is passed in the pcre_callout field  of  the  pcre_extra  data
2502           structure.  If  no such data was passed, the value of callout_data in a
2503           pcre_callout block is NULL. There is a description  of  the  pcre_extra
2504           structure in the pcreapi documentation.
2505    
2506           The  pattern_position field is present from version 1 of the pcre_call-
2507           out structure. It contains the offset to the next item to be matched in
2508           the pattern string.
2509    
2510           The  next_item_length field is present from version 1 of the pcre_call-
2511           out structure. It contains the length of the next item to be matched in
2512           the  pattern  string. When the callout immediately precedes an alterna-
2513           tion bar, a closing parenthesis, or the end of the pattern, the  length
2514           is  zero.  When the callout precedes an opening parenthesis, the length
2515           is that of the entire subpattern.
2516    
2517           The pattern_position and next_item_length fields are intended  to  help
2518           in  distinguishing between different automatic callouts, which all have
2519           the same callout number. However, they are set for all callouts.
2520    
2521    
2522  RETURN VALUES  RETURN VALUES
2523    
2524       The callout function returns an integer.  If  the  value  is         The external callout function returns an integer to PCRE. If the  value
2525       zero,  matching  proceeds as normal. If the value is greater         is  zero,  matching  proceeds  as  normal. If the value is greater than
2526       than zero, matching fails at the current  point,  but  back-         zero, matching fails at the current point, but  the  testing  of  other
2527       tracking  to test other possibilities goes ahead, just as if         matching possibilities goes ahead, just as if a lookahead assertion had
2528       a lookahead assertion had failed. If the value is less  than         failed. If the value is less than zero, the  match  is  abandoned,  and
2529       zero,  the  match  is abandoned, and pcre_exec() returns the         pcre_exec() (or pcre_dfa_exec()) returns the negative value.
2530       value.  
2531           Negative   values   should   normally   be   chosen  from  the  set  of
2532       Negative values should normally be chosen from  the  set  of         PCRE_ERROR_xxx values. In particular, PCRE_ERROR_NOMATCH forces a stan-
2533       PCRE_ERROR_xxx  values.  In  particular,  PCRE_ERROR_NOMATCH         dard  "no  match"  failure.   The  error  number  PCRE_ERROR_CALLOUT is
2534       forces a standard "no  match"  failure.   The  error  number         reserved for use by callout functions; it will never be  used  by  PCRE
2535       PCRE_ERROR_CALLOUT is reserved for use by callout functions;         itself.
2536       it will never be used by PCRE itself.  
2537    
2538    AUTHOR
2539    
2540           Philip Hazel
2541           University Computing Service
2542           Cambridge CB2 3QH, England.
2543    
2544    
2545    REVISION
2546    
2547           Last updated: 06 March 2007
2548           Copyright (c) 1997-2007 University of Cambridge.
2549    ------------------------------------------------------------------------------
2550    
2551    
2552    PCRECOMPAT(3)                                                    PCRECOMPAT(3)
2553    
 Last updated: 21 January 2003  
 Copyright (c) 1997-2003 University of Cambridge.  
 -----------------------------------------------------------------------------  
2554    
2555  NAME  NAME
2556       PCRE - Perl-compatible regular expressions         PCRE - Perl-compatible regular expressions
2557    
2558    
2559  DIFFERENCES FROM PERL  DIFFERENCES BETWEEN PCRE AND PERL
2560    
2561       This document describes the differences  in  the  ways  that         This  document describes the differences in the ways that PCRE and Perl
2562       PCRE  and  Perl  handle regular expressions. The differences         handle regular expressions. The differences described here  are  mainly
2563       described here are with respect to Perl 5.8.         with  respect  to  Perl 5.8, though PCRE version 7.0 contains some fea-
2564           tures that are expected to be in the forthcoming Perl 5.10.
2565       1. PCRE does  not  allow  repeat  quantifiers  on  lookahead  
2566       assertions. Perl permits them, but they do not mean what you         1. PCRE has only a subset of Perl's UTF-8 and Unicode support.  Details
2567       might think. For example, (?!a){3} does not assert that  the         of  what  it does have are given in the section on UTF-8 support in the
2568       next  three characters are not "a". It just asserts that the         main pcre page.
2569       next character is not "a" three times.  
2570           2. PCRE does not allow repeat quantifiers on lookahead assertions. Perl
2571       2. Capturing subpatterns that occur inside  negative  looka-         permits  them,  but they do not mean what you might think. For example,
2572       head  assertions  are  counted,  but  their  entries  in the         (?!a){3} does not assert that the next three characters are not "a". It
2573       offsets vector are never set. Perl sets its numerical  vari-         just asserts that the next character is not "a" three times.
2574       ables  from  any  such  patterns that are matched before the  
2575       assertion fails to match something (thereby succeeding), but         3.  Capturing  subpatterns  that occur inside negative lookahead asser-
2576       only  if  the negative lookahead assertion contains just one         tions are counted, but their entries in the offsets  vector  are  never
2577       branch.         set.  Perl sets its numerical variables from any such patterns that are
2578           matched before the assertion fails to match something (thereby succeed-
2579       3. Though binary zero characters are supported in  the  sub-         ing),  but  only  if the negative lookahead assertion contains just one
2580       ject  string,  they  are  not  allowed  in  a pattern string         branch.
2581       because it is passed as a normal  C  string,  terminated  by  
2582       zero. The escape sequence "\0" can be used in the pattern to         4. Though binary zero characters are supported in the  subject  string,
2583       represent a binary zero.         they are not allowed in a pattern string because it is passed as a nor-
2584           mal C string, terminated by zero. The escape sequence \0 can be used in
2585       4. The following Perl escape sequences  are  not  supported:         the pattern to represent a binary zero.
2586       \l,  \u,  \L,  \U,  \P, \p, and \X. In fact these are imple-  
2587       mented by Perl's general string-handling and are not part of         5.  The  following Perl escape sequences are not supported: \l, \u, \L,
2588       its pattern matching engine. If any of these are encountered         \U, and \N. In fact these are implemented by Perl's general string-han-
2589       by PCRE, an error is generated.         dling  and are not part of its pattern matching engine. If any of these
2590           are encountered by PCRE, an error is generated.
2591       5. PCRE does support the \Q...\E  escape  for  quoting  sub-  
2592       strings. Characters in between are treated as literals. This         6. The Perl escape sequences \p, \P, and \X are supported only if  PCRE
2593       is slightly different from Perl in that $  and  @  are  also         is  built  with Unicode character property support. The properties that
2594       handled  as  literals inside the quotes. In Perl, they cause         can be tested with \p and \P are limited to the general category  prop-
2595       variable interpolation (but of course  PCRE  does  not  have         erties  such  as  Lu and Nd, script names such as Greek or Han, and the
2596       variables). Note the following examples:         derived properties Any and L&.
2597    
2598           Pattern            PCRE matches      Perl matches         7. PCRE does support the \Q...\E escape for quoting substrings. Charac-
2599           ters  in  between  are  treated as literals. This is slightly different
2600           \Qabc$xyz\E        abc$xyz           abc followed by the         from Perl in that $ and @ are  also  handled  as  literals  inside  the
2601                                                  contents of $xyz         quotes.  In Perl, they cause variable interpolation (but of course PCRE
2602           \Qabc\$xyz\E       abc\$xyz          abc\$xyz         does not have variables). Note the following examples:
2603           \Qabc\E\$\Qxyz\E   abc$xyz           abc$xyz  
2604               Pattern            PCRE matches      Perl matches
2605       In PCRE, the \Q...\E mechanism is not  recognized  inside  a  
2606       character class.             \Qabc$xyz\E        abc$xyz           abc followed by the
2607                                                      contents of $xyz
2608       8. Fairly obviously, PCRE does not support the (?{code}) and             \Qabc\$xyz\E       abc\$xyz          abc\$xyz
2609       (?p{code})  constructions. However, there is some experimen-             \Qabc\E\$\Qxyz\E   abc$xyz           abc$xyz
2610       tal support for recursive patterns using the non-Perl  items  
2611       (?R),  (?number)  and  (?P>name).  Also,  the PCRE "callout"         The \Q...\E sequence is recognized both inside  and  outside  character
2612       feature allows an external function to be called during pat-         classes.
2613       tern matching.  
2614           8. Fairly obviously, PCRE does not support the (?{code}) and (??{code})
2615       9. There are some differences that are  concerned  with  the         constructions. However, there is support for recursive  patterns.  This
2616       settings  of  captured  strings  when  part  of a pattern is         is  not available in Perl 5.8, but will be in Perl 5.10. Also, the PCRE
2617       repeated. For example, matching "aba"  against  the  pattern         "callout" feature allows an external function to be called during  pat-
2618       /^(a(b)?)+$/  in Perl leaves $2 unset, but in PCRE it is set         tern matching. See the pcrecallout documentation for details.
2619       to "b".  
2620           9.  Subpatterns  that  are  called  recursively or as "subroutines" are
2621       10. PCRE  provides  some  extensions  to  the  Perl  regular         always treated as atomic groups in  PCRE.  This  is  like  Python,  but
2622       expression facilities:         unlike Perl.
2623    
2624       (a) Although lookbehind assertions must match  fixed  length         10.  There are some differences that are concerned with the settings of
2625       strings,  each  alternative branch of a lookbehind assertion         captured strings when part of  a  pattern  is  repeated.  For  example,
2626       can match a different length of string. Perl  requires  them         matching  "aba"  against  the  pattern  /^(a(b)?)+$/  in Perl leaves $2
2627       all to have the same length.         unset, but in PCRE it is set to "b".
2628    
2629       (b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is  not         11. PCRE provides some extensions to the Perl regular expression facil-
2630       set,  the  $  meta-character matches only at the very end of         ities.   Perl  5.10  will  include new features that are not in earlier
2631       the string.         versions, some of which (such as named parentheses) have been  in  PCRE
2632           for some time. This list is with respect to Perl 5.10:
2633       (c) If PCRE_EXTRA is set, a backslash followed by  a  letter  
2634       with no special meaning is faulted.         (a)  Although  lookbehind  assertions  must match fixed length strings,
2635           each alternative branch of a lookbehind assertion can match a different
2636       (d) If PCRE_UNGREEDY is set, the greediness of  the  repeti-         length of string. Perl requires them all to have the same length.
2637       tion  quantifiers  is inverted, that is, by default they are  
2638       not greedy, but if followed by a question mark they are.         (b)  If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is not set, the $
2639           meta-character matches only at the very end of the string.
2640       (e) PCRE_ANCHORED can be used to force a pattern to be tried  
2641       only at the first matching position in the subject string.         (c) If PCRE_EXTRA is set, a backslash followed by a letter with no spe-
2642           cial  meaning  is  faulted.  Otherwise,  like  Perl,  the  backslash is
2643       (f)  The  PCRE_NOTBOL,   PCRE_NOTEOL,   PCRE_NOTEMPTY,   and         ignored. (Perl can be made to issue a warning.)
2644       PCRE_NO_AUTO_CAPTURE  options  for  pcre_exec() have no Perl  
2645       equivalents.         (d) If PCRE_UNGREEDY is set, the greediness of the  repetition  quanti-
2646           fiers is inverted, that is, by default they are not greedy, but if fol-
2647       (g) The (?R), (?number), and (?P>name) constructs allows for         lowed by a question mark they are.
2648       recursive  pattern  matching  (Perl  can  do  this using the  
2649       (?p{code}) construct, which PCRE cannot support.)         (e) PCRE_ANCHORED can be used at matching time to force a pattern to be
2650           tried only at the first matching position in the subject string.
2651       (h) PCRE supports  named  capturing  substrings,  using  the  
2652       Python syntax.         (f)  The PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, and PCRE_NO_AUTO_CAP-
2653           TURE options for pcre_exec() have no Perl equivalents.
2654       (i) PCRE supports the  possessive  quantifier  "++"  syntax,  
2655       taken from Sun's Java package.         (g) The callout facility is PCRE-specific.
2656    
2657       (j) The (R) condition, for  testing  recursion,  is  a  PCRE         (h) The partial matching facility is PCRE-specific.
      extension.  
2658    
2659       (k) The callout facility is PCRE-specific.         (i) Patterns compiled by PCRE can be saved and re-used at a later time,
2660           even on different hosts that have the other endianness.
2661    
2662           (j)  The  alternative  matching function (pcre_dfa_exec()) matches in a
2663           different way and is not Perl-compatible.
2664    
2665    
2666    AUTHOR
2667    
2668           Philip Hazel
2669           University Computing Service
2670           Cambridge CB2 3QH, England.
2671    
2672    
2673    REVISION
2674    
2675           Last updated: 06 March 2007
2676           Copyright (c) 1997-2007 University of Cambridge.
2677    ------------------------------------------------------------------------------
2678    
2679    
2680    PCREPATTERN(3)                                                  PCREPATTERN(3)
2681    
 Last updated: 03 February 2003  
 Copyright (c) 1997-2003 University of Cambridge.  
 -----------------------------------------------------------------------------  
2682    
2683  NAME  NAME
2684       PCRE - Perl-compatible regular expressions         PCRE - Perl-compatible regular expressions
2685    
2686    
2687  PCRE REGULAR EXPRESSION DETAILS  PCRE REGULAR EXPRESSION DETAILS
2688    
2689       The syntax and semantics of  the  regular  expressions  sup-         The  syntax  and semantics of the regular expressions supported by PCRE
2690       ported  by PCRE are described below. Regular expressions are         are described below. Regular expressions are also described in the Perl
2691       also described in the Perl documentation and in a number  of         documentation  and  in  a  number  of books, some of which have copious
2692       other  books,  some  of which have copious examples. Jeffrey         examples.  Jeffrey Friedl's "Mastering Regular Expressions",  published
2693       Friedl's  "Mastering  Regular  Expressions",  published   by         by  O'Reilly, covers regular expressions in great detail. This descrip-
2694       O'Reilly,  covers them in great detail. The description here         tion of PCRE's regular expressions is intended as reference material.
2695       is intended as reference documentation.  
2696           The original operation of PCRE was on strings of  one-byte  characters.
2697       The basic operation of PCRE is on strings of bytes. However,         However,  there is now also support for UTF-8 character strings. To use
2698       there  is  also  support for UTF-8 character strings. To use         this, you must build PCRE to  include  UTF-8  support,  and  then  call
2699       this support you must build PCRE to include  UTF-8  support,         pcre_compile()  with  the  PCRE_UTF8  option.  How this affects pattern
2700       and  then call pcre_compile() with the PCRE_UTF8 option. How         matching is mentioned in several places below. There is also a  summary
2701       this affects the pattern matching is  mentioned  in  several         of  UTF-8  features  in  the  section on UTF-8 support in the main pcre
2702       places  below.  There is also a summary of UTF-8 features in         page.
2703       the section on UTF-8 support in the main pcre page.  
2704           The remainder of this document discusses the  patterns  that  are  sup-
2705       A regular expression is a pattern that is matched against  a         ported  by  PCRE when its main matching function, pcre_exec(), is used.
2706       subject string from left to right. Most characters stand for         From  release  6.0,   PCRE   offers   a   second   matching   function,
2707       themselves in a pattern, and match the corresponding charac-         pcre_dfa_exec(),  which matches using a different algorithm that is not
2708       ters in the subject. As a trivial example, the pattern         Perl-compatible. The advantages and disadvantages  of  the  alternative
2709           function, and how it differs from the normal function, are discussed in
2710         The quick brown fox         the pcrematching page.
2711    
2712       matches a portion of a subject string that is  identical  to  
2713       itself.  The  power  of  regular  expressions comes from the  CHARACTERS AND METACHARACTERS
2714       ability to include alternatives and repetitions in the  pat-  
2715       tern.  These  are encoded in the pattern by the use of meta-         A regular expression is a pattern that is  matched  against  a  subject
2716       characters, which do not stand for  themselves  but  instead         string  from  left  to right. Most characters stand for themselves in a
2717       are interpreted in some special way.         pattern, and match the corresponding characters in the  subject.  As  a
2718           trivial example, the pattern
2719       There are two different sets of meta-characters: those  that  
2720       are  recognized anywhere in the pattern except within square           The quick brown fox
2721       brackets, and those that are recognized in square  brackets.  
2722       Outside square brackets, the meta-characters are as follows:         matches a portion of a subject string that is identical to itself. When
2723           caseless matching is specified (the PCRE_CASELESS option), letters  are
2724         \      general escape character with several uses         matched  independently  of case. In UTF-8 mode, PCRE always understands
2725         ^      assert start of string (or line, in multiline mode)         the concept of case for characters whose values are less than  128,  so
2726         $      assert end of string (or line, in multiline mode)         caseless  matching  is always possible. For characters with higher val-
2727         .      match any character except newline (by default)         ues, the concept of case is supported if PCRE is compiled with  Unicode
2728         [      start character class definition         property  support,  but  not  otherwise.   If  you want to use caseless
2729         |      start of alternative branch         matching for characters 128 and above, you must  ensure  that  PCRE  is
2730         (      start subpattern         compiled with Unicode property support as well as with UTF-8 support.
2731         )      end subpattern  
2732         ?      extends the meaning of (         The  power  of  regular  expressions  comes from the ability to include
2733                also 0 or 1 quantifier         alternatives and repetitions in the pattern. These are encoded  in  the
2734                also quantifier minimizer         pattern by the use of metacharacters, which do not stand for themselves
2735         *      0 or more quantifier         but instead are interpreted in some special way.
2736         +      1 or more quantifier  
2737                also "possessive quantifier"         There are two different sets of metacharacters: those that  are  recog-
2738         {      start min/max quantifier         nized  anywhere in the pattern except within square brackets, and those
2739           that are recognized within square brackets.  Outside  square  brackets,
2740       Part of a pattern that is in square  brackets  is  called  a         the metacharacters are as follows:
2741       "character  class".  In  a  character  class  the only meta-  
2742       characters are:           \      general escape character with several uses
2743             ^      assert start of string (or line, in multiline mode)
2744         \      general escape character           $      assert end of string (or line, in multiline mode)
2745         ^      negate the class, but only if the first character           .      match any character except newline (by default)
2746         -      indicates character range           [      start character class definition
2747         [      POSIX character class (only if followed by POSIX           |      start of alternative branch
2748                  syntax)           (      start subpattern
2749         ]      terminates the character class           )      end subpattern
2750             ?      extends the meaning of (
2751                    also 0 or 1 quantifier
2752                    also quantifier minimizer
2753             *      0 or more quantifier
2754             +      1 or more quantifier
2755                    also "possessive quantifier"
2756             {      start min/max quantifier
2757    
2758           Part  of  a  pattern  that is in square brackets is called a "character
2759           class". In a character class the only metacharacters are:
2760    
2761             \      general escape character
2762             ^      negate the class, but only if the first character
2763             -      indicates character range
2764             [      POSIX character class (only if followed by POSIX
2765                      syntax)
2766             ]      terminates the character class
2767    
2768       The following sections describe  the  use  of  each  of  the         The following sections describe the use of each of the  metacharacters.
      meta-characters.  
2769    
2770    
2771  BACKSLASH  BACKSLASH
2772    
2773       The backslash character has several uses. Firstly, if it  is         The backslash character has several uses. Firstly, if it is followed by
2774       followed  by  a  non-alphameric character, it takes away any         a non-alphanumeric character, it takes away any  special  meaning  that
2775       special  meaning  that  character  may  have.  This  use  of         character  may  have.  This  use  of  backslash  as an escape character
2776       backslash  as  an  escape  character applies both inside and         applies both inside and outside character classes.
2777       outside character classes.  
2778           For example, if you want to match a * character, you write  \*  in  the
2779       For example, if you want to match a * character,