/[pcre]/code/trunk/maint/README

Diff of /code/trunk/maint/README

Parent Directory | Revision Log | View Patch Patch

-revision 114 by ph10,
Fri Mar  9 10:15:12 2007 UTC
+revision 122 by ph10,
Mon Mar 12 15:10:25 2007 UTC
 Line 1
+ MAINTENANCE README FOR PCRE
+ ---------------------------
  The files in the "maint" directory of the PCRE source contain data, scripts,
- and programs that are used for the maintenance of PCRE, but do not form part of
+ and programs that are used for the maintenance of PCRE, but which do not form
- the PCRE distribution tarballs.
+ part of the PCRE distribution tarballs. This document describes these files and
+ also contains some notes for maintainers. Its contents are:
+   Files in the maint directory
+   Updating to a new Unicode release
+   Preparing for a PCRE release
+   Making a PCRE release
+   Long-term ideas (wish list)
+ Files in the maint directory
+ ----------------------------
  Builducptable   A Perl script that creates the contents of the ucptable.h file
                  from two Unicode data files, which themselves are downloaded
-Line 15 
 Unicode.tables  The files in this direct
+Line 29 
 Unicode.tables  The files in this direct
  ucptest.c       A short C program for testing the Unicode property functions in
                  pcre_ucp_searchfuncs.c, mainly useful after rebuilding the
-                 Unicode property table. Compile and run this in the "main"
+                 Unicode property table. Compile and run this in the "maint"
                  directory.
  ucptestdata     A directory containing two files, testinput1 and testoutput1,
-Line 29 
 utf8.c          A short, freestanding C
+Line 43 
 utf8.c          A short, freestanding C
                  them as a UTF-8 character and outputs the equivalent code point
                  in hex.
+ Updating to a new Unicode release
+ ---------------------------------
  When there is a new release of Unicode, the files in Unicode.tables must be
  refreshed from the web site, and the Buildupctable script can then be run to
  generate a new version of ucptable.h. The ucptest program can be used to check
  that the resulting table works properly, using the data files in ucptestdata to
  check a number of test characters.
- ****
+ Preparing for a PCRE release
+ ----------------------------
+ This section contains a checklist of things that I consult before building a
+ distribution for a new release.
+ . Ensure that the version number and version date are correct in configure.ac.
+ . Run ./autogen.sh to ensure everything is up-to-date.
+ . Compile and test with many different config options, and combinations of
+   options:
+    * Totally standard ./configure with no options
+    * --disable-shared
+    * --disable-static
+    * --enable-utf8
+    * --enable-unicode-properties
+    * --disable-cpp
+    * --with-link-size=3 (occasionally check with 4 as well)
+    * --disable-stack-for-recursion
+    * --enable-newline-is-any
+   I've never automated this, but perhaps I should. The newline testing could be
+   enhanced; at present, some tests fail unless plain LF is a newline.
+ . Run perltest.pl on the test data for tests 1 and 4. The output should match
+   the PCRE test output, apart from the version identification at the top. The
+   other tests are not Perl-compatible (they use various special PCRE options).
+ . Test on a number of different operating systems. In particular, at the moment
+   I can test on Solaris, using Sun's cc compiler (as a change from gcc). Adding
+   -xarch=v9 to the cc options does a 64-bit test, but it also needs -S 64 for
+   pcretest to increase the stack size for test 2. I also test on FreeBSD and
+   Linux (where I develop).
+ . Test with valgrind by running "RunTest valgrind". There is also "RunGrepTest
+   valgrind", though that takes quite a long time.
+ . It can also useful to test with Electric Fence, though the fact that it
+   grumbles for missing free() calls can be a nuisance. (A missing free() in
+   pcretest is hardly a big problem.) To build with EF, use:
+     LIBS='/usr/lib/libefence.a -lpthread' with ./configure.
+   Then all normal runs use it to check for buffer overflow. Also run everything
+   with:
+     EF_PROTECT_BELOW=1 <whatever>
+   because there have been problems with lookbehinds that looked too far.
+ . Test with the emulated memmove() function by undefining HAVE_MEMMOVE and
+   HAVE_BCOPY in config.h.
+ . Documentation: check AUTHORS, COPYING, ChangeLog (check date), INSTALL,
+   LICENCE, NEWS (check date), NON-UNIX-USE, and README. Many of these won't
+   need changing, but over the long term things do change.
+ . Man pages: Check all man pages for \ not followed by e or f or " because
+   that indicates a markup error.
+ Making a PCRE release
+ ---------------------
+ Run PrepareRelease and commit the files that it changes (by removing trailing
+ spaces). Then run "make dist" to create the tarballs and the zipball.
+ Don't forget to update Freshmeat when the new release is out, and to tell
+ webmaster@pcre.org and the mailing list.
+ Future ideas (wish list)
+ ------------------------
+ This section records a list of ideas so that they do not get forgotten. They
+ vary enormously in their usefulness and potential for implementation. Some are
+ very sensible; some are rather wacky. Some have been on this list for years;
+ others are relatively new.
+ . Optimization
+   There are always ideas for new optimizations so as to speed up pattern
+   matching. Most of them try to save work by recognizing a non-match without
+   having to scan all the possibilities. These are some that I've recorded:
+   * /((A{0,5}){0,5}){0,5}(something complex)/ on a non-matching string is very
+     slow, though Perl is fast. Can we speed up somehow? Convert to {0,125}?
+     OTOH, this is pathological - the user could easily fix it.
+   * Turn ={4} into ==== ? (for speed). I once did an experiment, and it seems
+     to have little effect, and maybe makes things worse.
+   * "Ends with literal string" - note that a single character doesn't gain much
+     over the existing "required byte" (reqbyte) feature that just saves one
+     byte.
+   * These probably need to go in study():
+     o Remember an initial string rather than just 1 char?
+     o A required byte from alternatives - not just the last char, but an
+       earlier one if common to all alternatives.
+     o Minimum length of subject needed.
+     o Friedl contains other ideas.
+ . If Perl gets to a consistent state over the settings of capturing sub-
+   patterns inside repeats, see if we can match it. One example of the
+   difference is the matching of /(main(O)?)+/ against mainOmain, where PCRE
+   leaves $2 set. In Perl, it's unset. Changing this in PCRE will be very hard
+   because I think it needs much more state to be remembered.
+ . Perl 6 will be a revolution. Is it a revolution too far for PCRE?
+ . Unicode
+   * Note that in Perl, \s matches \pZ and similarly for \d, \w and the POSIX
+     character classes. For the moment, I've chosen not to support this for
+     backward compatibility, for speed, and because it would be messy to
+     implement.
+   * A different approach to Unicode might be to use a typedef to do everything
+     in unsigned shorts instead of unsigned chars. Actually, we'd have to have a
+     new typedef to distinguish data from bits of compiled pattern that are in
+     bytes, I think. There would need to be conversion functions in and out. I
+     don't think this is particularly trivial - and anyway, Unicode now has
+     characters that need more than 16 bits, so is this at all sensible?
+   * There has been a request for direct support of 16-bit characters and
+     UTF-16. However, since Unicode is moving beyond purely 16-bit characters,
+     is this worth it at all? One possible way of handling 16-bit characters
+     would be to "load" them in the same way that UTF-8 characters are loaded.
+ . Allow errorptr and erroroffset to be NULL. I don't like this idea.
+ . Line endings:
+   * Option to use NUL as a line terminator in subject strings. This could now
+     be done relatively easily since the extension to support LF, CR, and CRLF.
+     If this is done, a suitable option for pcregrep is also required.
+ . Option to provide the pattern with a length instead of with a NUL terminator.
+   This probably affects quite a few places in the code.
+ . Catch SIGSEGV for stack overflows?
+ . "Cut" as described in Jeffrey Friedl's book, p364: \v and \V. The definitions
+   aren't yet clear enough for me. \v flushes saved states so that no
+   backtracking to anything earlier can happen; \V says "no more bumpalong", but
+   does it fail the current match? As described in the book, these aren't really
+   "cut" as in Prolog, are they? NOTE: (a) PCRE once had "cut", but it was
+   removed when atomic groups were introduced. (b) Perl 5.10 has some (*PRUNE)
+   features -- see below.
+ . A feature to suspend a match via a callout was once requested.
+ . Option to convert results into character offsets and character lengths.
+ . Option for pcregrep to scan only the start of a file. I am not keen - this is
+   the job of "head".
+ . A (non-Unix) user wanted pcregrep options to (a) list a file name just once,
+   preceded by a blank line, instead of adding it to every matched line, and (b)
+   support --outputfile=name.
+ . Consider making UTF-8 and UCP the default for PCRE n.0 for some n > 7.
+ . Add a user pointer to pcre_malloc/free functions -- some option would be
+   needed to retain backward compatibility.
+ . Define a union for the results from pcre_fullinfo().
+ . Provide a "random access to the subject" facility so that the way in which it
+   is stored is independent of PCRE. For efficiency, it probably isn't possible
+   to switch this dynamically. It would have to be specified when PCRE was
+   compiled. PCRE would then call a function every time it wanted a character.
+ . There are new (*PRUNE) facilities in Perl 5.10, some of which it might be
+   relatively easy to implement.
+ . Also in Perl 5.10 are relative subroutine references (?&-1) and (?&+1) which
+   I didn't know about when I added some 5.10 features for PCRE 7.0. What about
+   (?(-1)... as a condition? That's an obvious extension, even if Perl 5.10
+   doesn't have it.
+ . Wild thought: the ability to compile from PCRE's internal byte code to a real
+   FSM and a very fast (third) matcher to process the result. There would be
+   even more restrictions than for pcre_dfa_exec(), however. This is not easy.
+ . Should pcretest have some private locale data, to avoid relying on the
+   available locales for the test data, since different OS have different ideas?
+   This won't be as thorough a test, but perhaps that doesn't really matter.
+ . pcregrep: add -rs for a sorted recurse? Having to store file names and sort
+   them will of course slow it down.
+ . Re-arrange test 2: take out the link-size dependent stuff for a separate test
+   that is run only when the link size *is* 2; leave in some non-numbered
+   debugging tests using the new /Z feature.
+ . Stan Switzer's goto replacement for longjmp, which is apparently very slow on
+   OS-X. This is used when stack recursion is disabled. It would be worth doing
+   some timing tests on other OS.
+ . Someone suggested --disable-callout to save code space when callouts are
+   never wanted. This seems rather marginal.
+ . Automate some of the testing before release into a script that compiles with
+   different options and runs the tests in each case.
+ . How about distributing a fixed pcre_chartables.c file and abandoning the
+   on-the-fly generation using dftables. This will make cross-compiling easier,
+   and in any case, locales are going out of fashion.
+ Philip Hazel
+ Email local part: ph10
+ Email domain: cam.ac.uk
+ Last updated: 12 March 2007

 Legend:



Removed from v.114
 


changed lines


 
Added in v.122
 Legend:



Removed from v.114
 


changed lines


 
Added in v.122
-Removed from v.114
+Added in v.122

	ViewVC Help
Powered by ViewVC 1.1.5