/[pcre]/code/trunk/pcre_compile.c
ViewVC logotype

Contents of /code/trunk/pcre_compile.c

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1438 - (show annotations)
Fri Jan 10 16:13:10 2014 UTC (5 years, 8 months ago) by ph10
File MIME type: text/plain
File size: 310924 byte(s)
Error occurred while calculating annotation data.
Fix caseless character class bug for characters within a range that have more 
than one other case.
1 /*************************************************
2 * Perl-Compatible Regular Expressions *
3 *************************************************/
4
5 /* PCRE is a library of functions to support regular expressions whose syntax
6 and semantics are as close as possible to those of the Perl 5 language.
7
8 Written by Philip Hazel
9 Copyright (c) 1997-2014 University of Cambridge
10
11 -----------------------------------------------------------------------------
12 Redistribution and use in source and binary forms, with or without
13 modification, are permitted provided that the following conditions are met:
14
15 * Redistributions of source code must retain the above copyright notice,
16 this list of conditions and the following disclaimer.
17
18 * Redistributions in binary form must reproduce the above copyright
19 notice, this list of conditions and the following disclaimer in the
20 documentation and/or other materials provided with the distribution.
21
22 * Neither the name of the University of Cambridge nor the names of its
23 contributors may be used to endorse or promote products derived from
24 this software without specific prior written permission.
25
26 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
27 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
28 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
29 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
30 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36 POSSIBILITY OF SUCH DAMAGE.
37 -----------------------------------------------------------------------------
38 */
39
40
41 /* This module contains the external function pcre_compile(), along with
42 supporting internal functions that are not used by other modules. */
43
44
45 #ifdef HAVE_CONFIG_H
46 #include "config.h"
47 #endif
48
49 #define NLBLOCK cd /* Block containing newline information */
50 #define PSSTART start_pattern /* Field containing processed string start */
51 #define PSEND end_pattern /* Field containing processed string end */
52
53 #include "pcre_internal.h"
54
55
56 /* When PCRE_DEBUG is defined, we need the pcre(16|32)_printint() function, which
57 is also used by pcretest. PCRE_DEBUG is not defined when building a production
58 library. We do not need to select pcre16_printint.c specially, because the
59 COMPILE_PCREx macro will already be appropriately set. */
60
61 #ifdef PCRE_DEBUG
62 /* pcre_printint.c should not include any headers */
63 #define PCRE_INCLUDED
64 #include "pcre_printint.c"
65 #undef PCRE_INCLUDED
66 #endif
67
68
69 /* Macro for setting individual bits in class bitmaps. */
70
71 #define SETBIT(a,b) a[(b)/8] |= (1 << ((b)&7))
72
73 /* Maximum length value to check against when making sure that the integer that
74 holds the compiled pattern length does not overflow. We make it a bit less than
75 INT_MAX to allow for adding in group terminating bytes, so that we don't have
76 to check them every time. */
77
78 #define OFLOW_MAX (INT_MAX - 20)
79
80 /* Definitions to allow mutual recursion */
81
82 static int
83 add_list_to_class(pcre_uint8 *, pcre_uchar **, int, compile_data *,
84 const pcre_uint32 *, unsigned int);
85
86 static BOOL
87 compile_regex(int, pcre_uchar **, const pcre_uchar **, int *, BOOL, BOOL, int, int,
88 pcre_uint32 *, pcre_int32 *, pcre_uint32 *, pcre_int32 *, branch_chain *,
89 compile_data *, int *);
90
91
92
93 /*************************************************
94 * Code parameters and static tables *
95 *************************************************/
96
97 /* This value specifies the size of stack workspace that is used during the
98 first pre-compile phase that determines how much memory is required. The regex
99 is partly compiled into this space, but the compiled parts are discarded as
100 soon as they can be, so that hopefully there will never be an overrun. The code
101 does, however, check for an overrun. The largest amount I've seen used is 218,
102 so this number is very generous.
103
104 The same workspace is used during the second, actual compile phase for
105 remembering forward references to groups so that they can be filled in at the
106 end. Each entry in this list occupies LINK_SIZE bytes, so even when LINK_SIZE
107 is 4 there is plenty of room for most patterns. However, the memory can get
108 filled up by repetitions of forward references, for example patterns like
109 /(?1){0,1999}(b)/, and one user did hit the limit. The code has been changed so
110 that the workspace is expanded using malloc() in this situation. The value
111 below is therefore a minimum, and we put a maximum on it for safety. The
112 minimum is now also defined in terms of LINK_SIZE so that the use of malloc()
113 kicks in at the same number of forward references in all cases. */
114
115 #define COMPILE_WORK_SIZE (2048*LINK_SIZE)
116 #define COMPILE_WORK_SIZE_MAX (100*COMPILE_WORK_SIZE)
117
118 /* This value determines the size of the initial vector that is used for
119 remembering named groups during the pre-compile. It is allocated on the stack,
120 but if it is too small, it is expanded using malloc(), in a similar way to the
121 workspace. The value is the number of slots in the list. */
122
123 #define NAMED_GROUP_LIST_SIZE 20
124
125 /* The overrun tests check for a slightly smaller size so that they detect the
126 overrun before it actually does run off the end of the data block. */
127
128 #define WORK_SIZE_SAFETY_MARGIN (100)
129
130 /* Private flags added to firstchar and reqchar. */
131
132 #define REQ_CASELESS (1 << 0) /* Indicates caselessness */
133 #define REQ_VARY (1 << 1) /* Reqchar followed non-literal item */
134 /* Negative values for the firstchar and reqchar flags */
135 #define REQ_UNSET (-2)
136 #define REQ_NONE (-1)
137
138 /* Repeated character flags. */
139
140 #define UTF_LENGTH 0x10000000l /* The char contains its length. */
141
142 /* Table for handling escaped characters in the range '0'-'z'. Positive returns
143 are simple data values; negative values are for special things like \d and so
144 on. Zero means further processing is needed (for things like \x), or the escape
145 is invalid. */
146
147 #ifndef EBCDIC
148
149 /* This is the "normal" table for ASCII systems or for EBCDIC systems running
150 in UTF-8 mode. */
151
152 static const short int escapes[] = {
153 0, 0,
154 0, 0,
155 0, 0,
156 0, 0,
157 0, 0,
158 CHAR_COLON, CHAR_SEMICOLON,
159 CHAR_LESS_THAN_SIGN, CHAR_EQUALS_SIGN,
160 CHAR_GREATER_THAN_SIGN, CHAR_QUESTION_MARK,
161 CHAR_COMMERCIAL_AT, -ESC_A,
162 -ESC_B, -ESC_C,
163 -ESC_D, -ESC_E,
164 0, -ESC_G,
165 -ESC_H, 0,
166 0, -ESC_K,
167 0, 0,
168 -ESC_N, 0,
169 -ESC_P, -ESC_Q,
170 -ESC_R, -ESC_S,
171 0, 0,
172 -ESC_V, -ESC_W,
173 -ESC_X, 0,
174 -ESC_Z, CHAR_LEFT_SQUARE_BRACKET,
175 CHAR_BACKSLASH, CHAR_RIGHT_SQUARE_BRACKET,
176 CHAR_CIRCUMFLEX_ACCENT, CHAR_UNDERSCORE,
177 CHAR_GRAVE_ACCENT, 7,
178 -ESC_b, 0,
179 -ESC_d, ESC_e,
180 ESC_f, 0,
181 -ESC_h, 0,
182 0, -ESC_k,
183 0, 0,
184 ESC_n, 0,
185 -ESC_p, 0,
186 ESC_r, -ESC_s,
187 ESC_tee, 0,
188 -ESC_v, -ESC_w,
189 0, 0,
190 -ESC_z
191 };
192
193 #else
194
195 /* This is the "abnormal" table for EBCDIC systems without UTF-8 support. */
196
197 static const short int escapes[] = {
198 /* 48 */ 0, 0, 0, '.', '<', '(', '+', '|',
199 /* 50 */ '&', 0, 0, 0, 0, 0, 0, 0,
200 /* 58 */ 0, 0, '!', '$', '*', ')', ';', '~',
201 /* 60 */ '-', '/', 0, 0, 0, 0, 0, 0,
202 /* 68 */ 0, 0, '|', ',', '%', '_', '>', '?',
203 /* 70 */ 0, 0, 0, 0, 0, 0, 0, 0,
204 /* 78 */ 0, '`', ':', '#', '@', '\'', '=', '"',
205 /* 80 */ 0, 7, -ESC_b, 0, -ESC_d, ESC_e, ESC_f, 0,
206 /* 88 */-ESC_h, 0, 0, '{', 0, 0, 0, 0,
207 /* 90 */ 0, 0, -ESC_k, 'l', 0, ESC_n, 0, -ESC_p,
208 /* 98 */ 0, ESC_r, 0, '}', 0, 0, 0, 0,
209 /* A0 */ 0, '~', -ESC_s, ESC_tee, 0,-ESC_v, -ESC_w, 0,
210 /* A8 */ 0,-ESC_z, 0, 0, 0, '[', 0, 0,
211 /* B0 */ 0, 0, 0, 0, 0, 0, 0, 0,
212 /* B8 */ 0, 0, 0, 0, 0, ']', '=', '-',
213 /* C0 */ '{',-ESC_A, -ESC_B, -ESC_C, -ESC_D,-ESC_E, 0, -ESC_G,
214 /* C8 */-ESC_H, 0, 0, 0, 0, 0, 0, 0,
215 /* D0 */ '}', 0, -ESC_K, 0, 0,-ESC_N, 0, -ESC_P,
216 /* D8 */-ESC_Q,-ESC_R, 0, 0, 0, 0, 0, 0,
217 /* E0 */ '\\', 0, -ESC_S, 0, 0,-ESC_V, -ESC_W, -ESC_X,
218 /* E8 */ 0,-ESC_Z, 0, 0, 0, 0, 0, 0,
219 /* F0 */ 0, 0, 0, 0, 0, 0, 0, 0,
220 /* F8 */ 0, 0, 0, 0, 0, 0, 0, 0
221 };
222 #endif
223
224
225 /* Table of special "verbs" like (*PRUNE). This is a short table, so it is
226 searched linearly. Put all the names into a single string, in order to reduce
227 the number of relocations when a shared library is dynamically linked. The
228 string is built from string macros so that it works in UTF-8 mode on EBCDIC
229 platforms. */
230
231 typedef struct verbitem {
232 int len; /* Length of verb name */
233 int op; /* Op when no arg, or -1 if arg mandatory */
234 int op_arg; /* Op when arg present, or -1 if not allowed */
235 } verbitem;
236
237 static const char verbnames[] =
238 "\0" /* Empty name is a shorthand for MARK */
239 STRING_MARK0
240 STRING_ACCEPT0
241 STRING_COMMIT0
242 STRING_F0
243 STRING_FAIL0
244 STRING_PRUNE0
245 STRING_SKIP0
246 STRING_THEN;
247
248 static const verbitem verbs[] = {
249 { 0, -1, OP_MARK },
250 { 4, -1, OP_MARK },
251 { 6, OP_ACCEPT, -1 },
252 { 6, OP_COMMIT, -1 },
253 { 1, OP_FAIL, -1 },
254 { 4, OP_FAIL, -1 },
255 { 5, OP_PRUNE, OP_PRUNE_ARG },
256 { 4, OP_SKIP, OP_SKIP_ARG },
257 { 4, OP_THEN, OP_THEN_ARG }
258 };
259
260 static const int verbcount = sizeof(verbs)/sizeof(verbitem);
261
262
263 /* Substitutes for [[:<:]] and [[:>:]], which mean start and end of word in
264 another regex library. */
265
266 static const pcre_uchar sub_start_of_word[] = {
267 CHAR_BACKSLASH, CHAR_b, CHAR_LEFT_PARENTHESIS, CHAR_QUESTION_MARK,
268 CHAR_EQUALS_SIGN, CHAR_BACKSLASH, CHAR_w, CHAR_RIGHT_PARENTHESIS, '\0' };
269
270 static const pcre_uchar sub_end_of_word[] = {
271 CHAR_BACKSLASH, CHAR_b, CHAR_LEFT_PARENTHESIS, CHAR_QUESTION_MARK,
272 CHAR_LESS_THAN_SIGN, CHAR_EQUALS_SIGN, CHAR_BACKSLASH, CHAR_w,
273 CHAR_RIGHT_PARENTHESIS, '\0' };
274
275
276 /* Tables of names of POSIX character classes and their lengths. The names are
277 now all in a single string, to reduce the number of relocations when a shared
278 library is dynamically loaded. The list of lengths is terminated by a zero
279 length entry. The first three must be alpha, lower, upper, as this is assumed
280 for handling case independence. The indices for graph, print, and punct are
281 needed, so identify them. */
282
283 static const char posix_names[] =
284 STRING_alpha0 STRING_lower0 STRING_upper0 STRING_alnum0
285 STRING_ascii0 STRING_blank0 STRING_cntrl0 STRING_digit0
286 STRING_graph0 STRING_print0 STRING_punct0 STRING_space0
287 STRING_word0 STRING_xdigit;
288
289 static const pcre_uint8 posix_name_lengths[] = {
290 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 };
291
292 #define PC_GRAPH 8
293 #define PC_PRINT 9
294 #define PC_PUNCT 10
295
296
297 /* Table of class bit maps for each POSIX class. Each class is formed from a
298 base map, with an optional addition or removal of another map. Then, for some
299 classes, there is some additional tweaking: for [:blank:] the vertical space
300 characters are removed, and for [:alpha:] and [:alnum:] the underscore
301 character is removed. The triples in the table consist of the base map offset,
302 second map offset or -1 if no second map, and a non-negative value for map
303 addition or a negative value for map subtraction (if there are two maps). The
304 absolute value of the third field has these meanings: 0 => no tweaking, 1 =>
305 remove vertical space characters, 2 => remove underscore. */
306
307 static const int posix_class_maps[] = {
308 cbit_word, cbit_digit, -2, /* alpha */
309 cbit_lower, -1, 0, /* lower */
310 cbit_upper, -1, 0, /* upper */
311 cbit_word, -1, 2, /* alnum - word without underscore */
312 cbit_print, cbit_cntrl, 0, /* ascii */
313 cbit_space, -1, 1, /* blank - a GNU extension */
314 cbit_cntrl, -1, 0, /* cntrl */
315 cbit_digit, -1, 0, /* digit */
316 cbit_graph, -1, 0, /* graph */
317 cbit_print, -1, 0, /* print */
318 cbit_punct, -1, 0, /* punct */
319 cbit_space, -1, 0, /* space */
320 cbit_word, -1, 0, /* word - a Perl extension */
321 cbit_xdigit,-1, 0 /* xdigit */
322 };
323
324 /* Table of substitutes for \d etc when PCRE_UCP is set. They are replaced by
325 Unicode property escapes. */
326
327 #ifdef SUPPORT_UCP
328 static const pcre_uchar string_PNd[] = {
329 CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET,
330 CHAR_N, CHAR_d, CHAR_RIGHT_CURLY_BRACKET, '\0' };
331 static const pcre_uchar string_pNd[] = {
332 CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET,
333 CHAR_N, CHAR_d, CHAR_RIGHT_CURLY_BRACKET, '\0' };
334 static const pcre_uchar string_PXsp[] = {
335 CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET,
336 CHAR_X, CHAR_s, CHAR_p, CHAR_RIGHT_CURLY_BRACKET, '\0' };
337 static const pcre_uchar string_pXsp[] = {
338 CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET,
339 CHAR_X, CHAR_s, CHAR_p, CHAR_RIGHT_CURLY_BRACKET, '\0' };
340 static const pcre_uchar string_PXwd[] = {
341 CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET,
342 CHAR_X, CHAR_w, CHAR_d, CHAR_RIGHT_CURLY_BRACKET, '\0' };
343 static const pcre_uchar string_pXwd[] = {
344 CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET,
345 CHAR_X, CHAR_w, CHAR_d, CHAR_RIGHT_CURLY_BRACKET, '\0' };
346
347 static const pcre_uchar *substitutes[] = {
348 string_PNd, /* \D */
349 string_pNd, /* \d */
350 string_PXsp, /* \S */ /* Xsp is Perl space, but from 8.34, Perl */
351 string_pXsp, /* \s */ /* space and POSIX space are the same. */
352 string_PXwd, /* \W */
353 string_pXwd /* \w */
354 };
355
356 /* The POSIX class substitutes must be in the order of the POSIX class names,
357 defined above, and there are both positive and negative cases. NULL means no
358 general substitute of a Unicode property escape (\p or \P). However, for some
359 POSIX classes (e.g. graph, print, punct) a special property code is compiled
360 directly. */
361
362 static const pcre_uchar string_pL[] = {
363 CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET,
364 CHAR_L, CHAR_RIGHT_CURLY_BRACKET, '\0' };
365 static const pcre_uchar string_pLl[] = {
366 CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET,
367 CHAR_L, CHAR_l, CHAR_RIGHT_CURLY_BRACKET, '\0' };
368 static const pcre_uchar string_pLu[] = {
369 CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET,
370 CHAR_L, CHAR_u, CHAR_RIGHT_CURLY_BRACKET, '\0' };
371 static const pcre_uchar string_pXan[] = {
372 CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET,
373 CHAR_X, CHAR_a, CHAR_n, CHAR_RIGHT_CURLY_BRACKET, '\0' };
374 static const pcre_uchar string_h[] = {
375 CHAR_BACKSLASH, CHAR_h, '\0' };
376 static const pcre_uchar string_pXps[] = {
377 CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET,
378 CHAR_X, CHAR_p, CHAR_s, CHAR_RIGHT_CURLY_BRACKET, '\0' };
379 static const pcre_uchar string_PL[] = {
380 CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET,
381 CHAR_L, CHAR_RIGHT_CURLY_BRACKET, '\0' };
382 static const pcre_uchar string_PLl[] = {
383 CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET,
384 CHAR_L, CHAR_l, CHAR_RIGHT_CURLY_BRACKET, '\0' };
385 static const pcre_uchar string_PLu[] = {
386 CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET,
387 CHAR_L, CHAR_u, CHAR_RIGHT_CURLY_BRACKET, '\0' };
388 static const pcre_uchar string_PXan[] = {
389 CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET,
390 CHAR_X, CHAR_a, CHAR_n, CHAR_RIGHT_CURLY_BRACKET, '\0' };
391 static const pcre_uchar string_H[] = {
392 CHAR_BACKSLASH, CHAR_H, '\0' };
393 static const pcre_uchar string_PXps[] = {
394 CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET,
395 CHAR_X, CHAR_p, CHAR_s, CHAR_RIGHT_CURLY_BRACKET, '\0' };
396
397 static const pcre_uchar *posix_substitutes[] = {
398 string_pL, /* alpha */
399 string_pLl, /* lower */
400 string_pLu, /* upper */
401 string_pXan, /* alnum */
402 NULL, /* ascii */
403 string_h, /* blank */
404 NULL, /* cntrl */
405 string_pNd, /* digit */
406 NULL, /* graph */
407 NULL, /* print */
408 NULL, /* punct */
409 string_pXps, /* space */ /* Xps is POSIX space, but from 8.34 */
410 string_pXwd, /* word */ /* Perl and POSIX space are the same */
411 NULL, /* xdigit */
412 /* Negated cases */
413 string_PL, /* ^alpha */
414 string_PLl, /* ^lower */
415 string_PLu, /* ^upper */
416 string_PXan, /* ^alnum */
417 NULL, /* ^ascii */
418 string_H, /* ^blank */
419 NULL, /* ^cntrl */
420 string_PNd, /* ^digit */
421 NULL, /* ^graph */
422 NULL, /* ^print */
423 NULL, /* ^punct */
424 string_PXps, /* ^space */ /* Xps is POSIX space, but from 8.34 */
425 string_PXwd, /* ^word */ /* Perl and POSIX space are the same */
426 NULL /* ^xdigit */
427 };
428 #define POSIX_SUBSIZE (sizeof(posix_substitutes) / sizeof(pcre_uchar *))
429 #endif
430
431 #define STRING(a) # a
432 #define XSTRING(s) STRING(s)
433
434 /* The texts of compile-time error messages. These are "char *" because they
435 are passed to the outside world. Do not ever re-use any error number, because
436 they are documented. Always add a new error instead. Messages marked DEAD below
437 are no longer used. This used to be a table of strings, but in order to reduce
438 the number of relocations needed when a shared library is loaded dynamically,
439 it is now one long string. We cannot use a table of offsets, because the
440 lengths of inserts such as XSTRING(MAX_NAME_SIZE) are not known. Instead, we
441 simply count through to the one we want - this isn't a performance issue
442 because these strings are used only when there is a compilation error.
443
444 Each substring ends with \0 to insert a null character. This includes the final
445 substring, so that the whole string ends with \0\0, which can be detected when
446 counting through. */
447
448 static const char error_texts[] =
449 "no error\0"
450 "\\ at end of pattern\0"
451 "\\c at end of pattern\0"
452 "unrecognized character follows \\\0"
453 "numbers out of order in {} quantifier\0"
454 /* 5 */
455 "number too big in {} quantifier\0"
456 "missing terminating ] for character class\0"
457 "invalid escape sequence in character class\0"
458 "range out of order in character class\0"
459 "nothing to repeat\0"
460 /* 10 */
461 "operand of unlimited repeat could match the empty string\0" /** DEAD **/
462 "internal error: unexpected repeat\0"
463 "unrecognized character after (? or (?-\0"
464 "POSIX named classes are supported only within a class\0"
465 "missing )\0"
466 /* 15 */
467 "reference to non-existent subpattern\0"
468 "erroffset passed as NULL\0"
469 "unknown option bit(s) set\0"
470 "missing ) after comment\0"
471 "parentheses nested too deeply\0" /** DEAD **/
472 /* 20 */
473 "regular expression is too large\0"
474 "failed to get memory\0"
475 "unmatched parentheses\0"
476 "internal error: code overflow\0"
477 "unrecognized character after (?<\0"
478 /* 25 */
479 "lookbehind assertion is not fixed length\0"
480 "malformed number or name after (?(\0"
481 "conditional group contains more than two branches\0"
482 "assertion expected after (?(\0"
483 "(?R or (?[+-]digits must be followed by )\0"
484 /* 30 */
485 "unknown POSIX class name\0"
486 "POSIX collating elements are not supported\0"
487 "this version of PCRE is compiled without UTF support\0"
488 "spare error\0" /** DEAD **/
489 "character value in \\x{} or \\o{} is too large\0"
490 /* 35 */
491 "invalid condition (?(0)\0"
492 "\\C not allowed in lookbehind assertion\0"
493 "PCRE does not support \\L, \\l, \\N{name}, \\U, or \\u\0"
494 "number after (?C is > 255\0"
495 "closing ) for (?C expected\0"
496 /* 40 */
497 "recursive call could loop indefinitely\0"
498 "unrecognized character after (?P\0"
499 "syntax error in subpattern name (missing terminator)\0"
500 "two named subpatterns have the same name\0"
501 "invalid UTF-8 string\0"
502 /* 45 */
503 "support for \\P, \\p, and \\X has not been compiled\0"
504 "malformed \\P or \\p sequence\0"
505 "unknown property name after \\P or \\p\0"
506 "subpattern name is too long (maximum " XSTRING(MAX_NAME_SIZE) " characters)\0"
507 "too many named subpatterns (maximum " XSTRING(MAX_NAME_COUNT) ")\0"
508 /* 50 */
509 "repeated subpattern is too long\0" /** DEAD **/
510 "octal value is greater than \\377 in 8-bit non-UTF-8 mode\0"
511 "internal error: overran compiling workspace\0"
512 "internal error: previously-checked referenced subpattern not found\0"
513 "DEFINE group contains more than one branch\0"
514 /* 55 */
515 "repeating a DEFINE group is not allowed\0" /** DEAD **/
516 "inconsistent NEWLINE options\0"
517 "\\g is not followed by a braced, angle-bracketed, or quoted name/number or by a plain number\0"
518 "a numbered reference must not be zero\0"
519 "an argument is not allowed for (*ACCEPT), (*FAIL), or (*COMMIT)\0"
520 /* 60 */
521 "(*VERB) not recognized or malformed\0"
522 "number is too big\0"
523 "subpattern name expected\0"
524 "digit expected after (?+\0"
525 "] is an invalid data character in JavaScript compatibility mode\0"
526 /* 65 */
527 "different names for subpatterns of the same number are not allowed\0"
528 "(*MARK) must have an argument\0"
529 "this version of PCRE is not compiled with Unicode property support\0"
530 "\\c must be followed by an ASCII character\0"
531 "\\k is not followed by a braced, angle-bracketed, or quoted name\0"
532 /* 70 */
533 "internal error: unknown opcode in find_fixedlength()\0"
534 "\\N is not supported in a class\0"
535 "too many forward references\0"
536 "disallowed Unicode code point (>= 0xd800 && <= 0xdfff)\0"
537 "invalid UTF-16 string\0"
538 /* 75 */
539 "name is too long in (*MARK), (*PRUNE), (*SKIP), or (*THEN)\0"
540 "character value in \\u.... sequence is too large\0"
541 "invalid UTF-32 string\0"
542 "setting UTF is disabled by the application\0"
543 "non-hex character in \\x{} (closing brace missing?)\0"
544 /* 80 */
545 "non-octal character in \\o{} (closing brace missing?)\0"
546 "missing opening brace after \\o\0"
547 "parentheses are too deeply nested\0"
548 "invalid range in character class\0"
549 "group name must start with a non-digit\0"
550 ;
551
552 /* Table to identify digits and hex digits. This is used when compiling
553 patterns. Note that the tables in chartables are dependent on the locale, and
554 may mark arbitrary characters as digits - but the PCRE compiling code expects
555 to handle only 0-9, a-z, and A-Z as digits when compiling. That is why we have
556 a private table here. It costs 256 bytes, but it is a lot faster than doing
557 character value tests (at least in some simple cases I timed), and in some
558 applications one wants PCRE to compile efficiently as well as match
559 efficiently.
560
561 For convenience, we use the same bit definitions as in chartables:
562
563 0x04 decimal digit
564 0x08 hexadecimal digit
565
566 Then we can use ctype_digit and ctype_xdigit in the code. */
567
568 /* Using a simple comparison for decimal numbers rather than a memory read
569 is much faster, and the resulting code is simpler (the compiler turns it
570 into a subtraction and unsigned comparison). */
571
572 #define IS_DIGIT(x) ((x) >= CHAR_0 && (x) <= CHAR_9)
573
574 #ifndef EBCDIC
575
576 /* This is the "normal" case, for ASCII systems, and EBCDIC systems running in
577 UTF-8 mode. */
578
579 static const pcre_uint8 digitab[] =
580 {
581 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 0- 7 */
582 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 8- 15 */
583 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 16- 23 */
584 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */
585 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - ' */
586 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* ( - / */
587 0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c, /* 0 - 7 */
588 0x0c,0x0c,0x00,0x00,0x00,0x00,0x00,0x00, /* 8 - ? */
589 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* @ - G */
590 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* H - O */
591 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* P - W */
592 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* X - _ */
593 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* ` - g */
594 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* h - o */
595 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* p - w */
596 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* x -127 */
597 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */
598 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */
599 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */
600 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */
601 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */
602 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */
603 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */
604 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
605 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */
606 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */
607 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */
608 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */
609 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */
610 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */
611 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
612 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */
613
614 #else
615
616 /* This is the "abnormal" case, for EBCDIC systems not running in UTF-8 mode. */
617
618 static const pcre_uint8 digitab[] =
619 {
620 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 0- 7 0 */
621 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 8- 15 */
622 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 16- 23 10 */
623 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */
624 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 32- 39 20 */
625 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 40- 47 */
626 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 48- 55 30 */
627 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 56- 63 */
628 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - 71 40 */
629 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 72- | */
630 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* & - 87 50 */
631 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 88- 95 */
632 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - -103 60 */
633 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 104- ? */
634 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 112-119 70 */
635 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 120- " */
636 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* 128- g 80 */
637 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* h -143 */
638 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144- p 90 */
639 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* q -159 */
640 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160- x A0 */
641 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* y -175 */
642 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* ^ -183 B0 */
643 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
644 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* { - G C0 */
645 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* H -207 */
646 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* } - P D0 */
647 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Q -223 */
648 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* \ - X E0 */
649 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Y -239 */
650 0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c, /* 0 - 7 F0 */
651 0x0c,0x0c,0x00,0x00,0x00,0x00,0x00,0x00};/* 8 -255 */
652
653 static const pcre_uint8 ebcdic_chartab[] = { /* chartable partial dup */
654 0x80,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /* 0- 7 */
655 0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00, /* 8- 15 */
656 0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /* 16- 23 */
657 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */
658 0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /* 32- 39 */
659 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 40- 47 */
660 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 48- 55 */
661 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 56- 63 */
662 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - 71 */
663 0x00,0x00,0x00,0x80,0x00,0x80,0x80,0x80, /* 72- | */
664 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* & - 87 */
665 0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00, /* 88- 95 */
666 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - -103 */
667 0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x80, /* 104- ? */
668 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 112-119 */
669 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 120- " */
670 0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* 128- g */
671 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* h -143 */
672 0x00,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* 144- p */
673 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* q -159 */
674 0x00,0x00,0x12,0x12,0x12,0x12,0x12,0x12, /* 160- x */
675 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* y -175 */
676 0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* ^ -183 */
677 0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
678 0x80,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* { - G */
679 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* H -207 */
680 0x00,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* } - P */
681 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* Q -223 */
682 0x00,0x00,0x12,0x12,0x12,0x12,0x12,0x12, /* \ - X */
683 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* Y -239 */
684 0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /* 0 - 7 */
685 0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x00};/* 8 -255 */
686 #endif
687
688
689 /* This table is used to check whether auto-possessification is possible
690 between adjacent character-type opcodes. The left-hand (repeated) opcode is
691 used to select the row, and the right-hand opcode is use to select the column.
692 A value of 1 means that auto-possessification is OK. For example, the second
693 value in the first row means that \D+\d can be turned into \D++\d.
694
695 The Unicode property types (\P and \p) have to be present to fill out the table
696 because of what their opcode values are, but the table values should always be
697 zero because property types are handled separately in the code. The last four
698 columns apply to items that cannot be repeated, so there is no need to have
699 rows for them. Note that OP_DIGIT etc. are generated only when PCRE_UCP is
700 *not* set. When it is set, \d etc. are converted into OP_(NOT_)PROP codes. */
701
702 #define APTROWS (LAST_AUTOTAB_LEFT_OP - FIRST_AUTOTAB_OP + 1)
703 #define APTCOLS (LAST_AUTOTAB_RIGHT_OP - FIRST_AUTOTAB_OP + 1)
704
705 static const pcre_uint8 autoposstab[APTROWS][APTCOLS] = {
706 /* \D \d \S \s \W \w . .+ \C \P \p \R \H \h \V \v \X \Z \z $ $M */
707 { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 }, /* \D */
708 { 1, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 1, 1, 1 }, /* \d */
709 { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 1, 1, 1 }, /* \S */
710 { 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 }, /* \s */
711 { 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 }, /* \W */
712 { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 1, 1, 1 }, /* \w */
713 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0 }, /* . */
714 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 }, /* .+ */
715 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 }, /* \C */
716 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* \P */
717 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* \p */
718 { 0, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0 }, /* \R */
719 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0 }, /* \H */
720 { 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0, 1, 0, 0 }, /* \h */
721 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 0, 0 }, /* \V */
722 { 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 1, 0, 0 }, /* \v */
723 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } /* \X */
724 };
725
726
727 /* This table is used to check whether auto-possessification is possible
728 between adjacent Unicode property opcodes (OP_PROP and OP_NOTPROP). The
729 left-hand (repeated) opcode is used to select the row, and the right-hand
730 opcode is used to select the column. The values are as follows:
731
732 0 Always return FALSE (never auto-possessify)
733 1 Character groups are distinct (possessify if both are OP_PROP)
734 2 Check character categories in the same group (general or particular)
735 3 TRUE if the two opcodes are not the same (PROP vs NOTPROP)
736
737 4 Check left general category vs right particular category
738 5 Check right general category vs left particular category
739
740 6 Left alphanum vs right general category
741 7 Left space vs right general category
742 8 Left word vs right general category
743
744 9 Right alphanum vs left general category
745 10 Right space vs left general category
746 11 Right word vs left general category
747
748 12 Left alphanum vs right particular category
749 13 Left space vs right particular category
750 14 Left word vs right particular category
751
752 15 Right alphanum vs left particular category
753 16 Right space vs left particular category
754 17 Right word vs left particular category
755 */
756
757 static const pcre_uint8 propposstab[PT_TABSIZE][PT_TABSIZE] = {
758 /* ANY LAMP GC PC SC ALNUM SPACE PXSPACE WORD CLIST UCNC */
759 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* PT_ANY */
760 { 0, 3, 0, 0, 0, 3, 1, 1, 0, 0, 0 }, /* PT_LAMP */
761 { 0, 0, 2, 4, 0, 9, 10, 10, 11, 0, 0 }, /* PT_GC */
762 { 0, 0, 5, 2, 0, 15, 16, 16, 17, 0, 0 }, /* PT_PC */
763 { 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0 }, /* PT_SC */
764 { 0, 3, 6, 12, 0, 3, 1, 1, 0, 0, 0 }, /* PT_ALNUM */
765 { 0, 1, 7, 13, 0, 1, 3, 3, 1, 0, 0 }, /* PT_SPACE */
766 { 0, 1, 7, 13, 0, 1, 3, 3, 1, 0, 0 }, /* PT_PXSPACE */
767 { 0, 0, 8, 14, 0, 0, 1, 1, 3, 0, 0 }, /* PT_WORD */
768 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* PT_CLIST */
769 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3 } /* PT_UCNC */
770 };
771
772 /* This table is used to check whether auto-possessification is possible
773 between adjacent Unicode property opcodes (OP_PROP and OP_NOTPROP) when one
774 specifies a general category and the other specifies a particular category. The
775 row is selected by the general category and the column by the particular
776 category. The value is 1 if the particular category is not part of the general
777 category. */
778
779 static const pcre_uint8 catposstab[7][30] = {
780 /* Cc Cf Cn Co Cs Ll Lm Lo Lt Lu Mc Me Mn Nd Nl No Pc Pd Pe Pf Pi Po Ps Sc Sk Sm So Zl Zp Zs */
781 { 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }, /* C */
782 { 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }, /* L */
783 { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }, /* M */
784 { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }, /* N */
785 { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1 }, /* P */
786 { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1 }, /* S */
787 { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0 } /* Z */
788 };
789
790 /* This table is used when checking ALNUM, (PX)SPACE, SPACE, and WORD against
791 a general or particular category. The properties in each row are those
792 that apply to the character set in question. Duplication means that a little
793 unnecessary work is done when checking, but this keeps things much simpler
794 because they can all use the same code. For more details see the comment where
795 this table is used.
796
797 Note: SPACE and PXSPACE used to be different because Perl excluded VT from
798 "space", but from Perl 5.18 it's included, so both categories are treated the
799 same here. */
800
801 static const pcre_uint8 posspropstab[3][4] = {
802 { ucp_L, ucp_N, ucp_N, ucp_Nl }, /* ALNUM, 3rd and 4th values redundant */
803 { ucp_Z, ucp_Z, ucp_C, ucp_Cc }, /* SPACE and PXSPACE, 2nd value redundant */
804 { ucp_L, ucp_N, ucp_P, ucp_Po } /* WORD */
805 };
806
807 /* This table is used when converting repeating opcodes into possessified
808 versions as a result of an explicit possessive quantifier such as ++. A zero
809 value means there is no possessified version - in those cases the item in
810 question must be wrapped in ONCE brackets. The table is truncated at OP_CALLOUT
811 because all relevant opcodes are less than that. */
812
813 static const pcre_uint8 opcode_possessify[] = {
814 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0 - 15 */
815 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 16 - 31 */
816
817 0, /* NOTI */
818 OP_POSSTAR, 0, /* STAR, MINSTAR */
819 OP_POSPLUS, 0, /* PLUS, MINPLUS */
820 OP_POSQUERY, 0, /* QUERY, MINQUERY */
821 OP_POSUPTO, 0, /* UPTO, MINUPTO */
822 0, /* EXACT */
823 0, 0, 0, 0, /* POS{STAR,PLUS,QUERY,UPTO} */
824
825 OP_POSSTARI, 0, /* STARI, MINSTARI */
826 OP_POSPLUSI, 0, /* PLUSI, MINPLUSI */
827 OP_POSQUERYI, 0, /* QUERYI, MINQUERYI */
828 OP_POSUPTOI, 0, /* UPTOI, MINUPTOI */
829 0, /* EXACTI */
830 0, 0, 0, 0, /* POS{STARI,PLUSI,QUERYI,UPTOI} */
831
832 OP_NOTPOSSTAR, 0, /* NOTSTAR, NOTMINSTAR */
833 OP_NOTPOSPLUS, 0, /* NOTPLUS, NOTMINPLUS */
834 OP_NOTPOSQUERY, 0, /* NOTQUERY, NOTMINQUERY */
835 OP_NOTPOSUPTO, 0, /* NOTUPTO, NOTMINUPTO */
836 0, /* NOTEXACT */
837 0, 0, 0, 0, /* NOTPOS{STAR,PLUS,QUERY,UPTO} */
838
839 OP_NOTPOSSTARI, 0, /* NOTSTARI, NOTMINSTARI */
840 OP_NOTPOSPLUSI, 0, /* NOTPLUSI, NOTMINPLUSI */
841 OP_NOTPOSQUERYI, 0, /* NOTQUERYI, NOTMINQUERYI */
842 OP_NOTPOSUPTOI, 0, /* NOTUPTOI, NOTMINUPTOI */
843 0, /* NOTEXACTI */
844 0, 0, 0, 0, /* NOTPOS{STARI,PLUSI,QUERYI,UPTOI} */
845
846 OP_TYPEPOSSTAR, 0, /* TYPESTAR, TYPEMINSTAR */
847 OP_TYPEPOSPLUS, 0, /* TYPEPLUS, TYPEMINPLUS */
848 OP_TYPEPOSQUERY, 0, /* TYPEQUERY, TYPEMINQUERY */
849 OP_TYPEPOSUPTO, 0, /* TYPEUPTO, TYPEMINUPTO */
850 0, /* TYPEEXACT */
851 0, 0, 0, 0, /* TYPEPOS{STAR,PLUS,QUERY,UPTO} */
852
853 OP_CRPOSSTAR, 0, /* CRSTAR, CRMINSTAR */
854 OP_CRPOSPLUS, 0, /* CRPLUS, CRMINPLUS */
855 OP_CRPOSQUERY, 0, /* CRQUERY, CRMINQUERY */
856 OP_CRPOSRANGE, 0, /* CRRANGE, CRMINRANGE */
857 0, 0, 0, 0, /* CRPOS{STAR,PLUS,QUERY,RANGE} */
858
859 0, 0, 0, /* CLASS, NCLASS, XCLASS */
860 0, 0, /* REF, REFI */
861 0, 0, /* DNREF, DNREFI */
862 0, 0 /* RECURSE, CALLOUT */
863 };
864
865
866
867 /*************************************************
868 * Find an error text *
869 *************************************************/
870
871 /* The error texts are now all in one long string, to save on relocations. As
872 some of the text is of unknown length, we can't use a table of offsets.
873 Instead, just count through the strings. This is not a performance issue
874 because it happens only when there has been a compilation error.
875
876 Argument: the error number
877 Returns: pointer to the error string
878 */
879
880 static const char *
881 find_error_text(int n)
882 {
883 const char *s = error_texts;
884 for (; n > 0; n--)
885 {
886 while (*s++ != CHAR_NULL) {};
887 if (*s == CHAR_NULL) return "Error text not found (please report)";
888 }
889 return s;
890 }
891
892
893
894 /*************************************************
895 * Expand the workspace *
896 *************************************************/
897
898 /* This function is called during the second compiling phase, if the number of
899 forward references fills the existing workspace, which is originally a block on
900 the stack. A larger block is obtained from malloc() unless the ultimate limit
901 has been reached or the increase will be rather small.
902
903 Argument: pointer to the compile data block
904 Returns: 0 if all went well, else an error number
905 */
906
907 static int
908 expand_workspace(compile_data *cd)
909 {
910 pcre_uchar *newspace;
911 int newsize = cd->workspace_size * 2;
912
913 if (newsize > COMPILE_WORK_SIZE_MAX) newsize = COMPILE_WORK_SIZE_MAX;
914 if (cd->workspace_size >= COMPILE_WORK_SIZE_MAX ||
915 newsize - cd->workspace_size < WORK_SIZE_SAFETY_MARGIN)
916 return ERR72;
917
918 newspace = (PUBL(malloc))(IN_UCHARS(newsize));
919 if (newspace == NULL) return ERR21;
920 memcpy(newspace, cd->start_workspace, cd->workspace_size * sizeof(pcre_uchar));
921 cd->hwm = (pcre_uchar *)newspace + (cd->hwm - cd->start_workspace);
922 if (cd->workspace_size > COMPILE_WORK_SIZE)
923 (PUBL(free))((void *)cd->start_workspace);
924 cd->start_workspace = newspace;
925 cd->workspace_size = newsize;
926 return 0;
927 }
928
929
930
931 /*************************************************
932 * Check for counted repeat *
933 *************************************************/
934
935 /* This function is called when a '{' is encountered in a place where it might
936 start a quantifier. It looks ahead to see if it really is a quantifier or not.
937 It is only a quantifier if it is one of the forms {ddd} {ddd,} or {ddd,ddd}
938 where the ddds are digits.
939
940 Arguments:
941 p pointer to the first char after '{'
942
943 Returns: TRUE or FALSE
944 */
945
946 static BOOL
947 is_counted_repeat(const pcre_uchar *p)
948 {
949 if (!IS_DIGIT(*p)) return FALSE;
950 p++;
951 while (IS_DIGIT(*p)) p++;
952 if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE;
953
954 if (*p++ != CHAR_COMMA) return FALSE;
955 if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE;
956
957 if (!IS_DIGIT(*p)) return FALSE;
958 p++;
959 while (IS_DIGIT(*p)) p++;
960
961 return (*p == CHAR_RIGHT_CURLY_BRACKET);
962 }
963
964
965
966 /*************************************************
967 * Handle escapes *
968 *************************************************/
969
970 /* This function is called when a \ has been encountered. It either returns a
971 positive value for a simple escape such as \n, or 0 for a data character which
972 will be placed in chptr. A backreference to group n is returned as negative n.
973 When UTF-8 is enabled, a positive value greater than 255 may be returned in
974 chptr. On entry, ptr is pointing at the \. On exit, it is on the final
975 character of the escape sequence.
976
977 Arguments:
978 ptrptr points to the pattern position pointer
979 chptr points to a returned data character
980 errorcodeptr points to the errorcode variable
981 bracount number of previous extracting brackets
982 options the options bits
983 isclass TRUE if inside a character class
984
985 Returns: zero => a data character
986 positive => a special escape sequence
987 negative => a back reference
988 on error, errorcodeptr is set
989 */
990
991 static int
992 check_escape(const pcre_uchar **ptrptr, pcre_uint32 *chptr, int *errorcodeptr,
993 int bracount, int options, BOOL isclass)
994 {
995 /* PCRE_UTF16 has the same value as PCRE_UTF8. */
996 BOOL utf = (options & PCRE_UTF8) != 0;
997 const pcre_uchar *ptr = *ptrptr + 1;
998 pcre_uint32 c;
999 int escape = 0;
1000 int i;
1001
1002 GETCHARINCTEST(c, ptr); /* Get character value, increment pointer */
1003 ptr--; /* Set pointer back to the last byte */
1004
1005 /* If backslash is at the end of the pattern, it's an error. */
1006
1007 if (c == CHAR_NULL) *errorcodeptr = ERR1;
1008
1009 /* Non-alphanumerics are literals. For digits or letters, do an initial lookup
1010 in a table. A non-zero result is something that can be returned immediately.
1011 Otherwise further processing may be required. */
1012
1013 #ifndef EBCDIC /* ASCII/UTF-8 coding */
1014 /* Not alphanumeric */
1015 else if (c < CHAR_0 || c > CHAR_z) {}
1016 else if ((i = escapes[c - CHAR_0]) != 0)
1017 { if (i > 0) c = (pcre_uint32)i; else escape = -i; }
1018
1019 #else /* EBCDIC coding */
1020 /* Not alphanumeric */
1021 else if (c < CHAR_a || (!MAX_255(c) || (ebcdic_chartab[c] & 0x0E) == 0)) {}
1022 else if ((i = escapes[c - 0x48]) != 0) { if (i > 0) c = (pcre_uint32)i; else escape = -i; }
1023 #endif
1024
1025 /* Escapes that need further processing, or are illegal. */
1026
1027 else
1028 {
1029 const pcre_uchar *oldptr;
1030 BOOL braced, negated, overflow;
1031 int s;
1032
1033 switch (c)
1034 {
1035 /* A number of Perl escapes are not handled by PCRE. We give an explicit
1036 error. */
1037
1038 case CHAR_l:
1039 case CHAR_L:
1040 *errorcodeptr = ERR37;
1041 break;
1042
1043 case CHAR_u:
1044 if ((options & PCRE_JAVASCRIPT_COMPAT) != 0)
1045 {
1046 /* In JavaScript, \u must be followed by four hexadecimal numbers.
1047 Otherwise it is a lowercase u letter. */
1048 if (MAX_255(ptr[1]) && (digitab[ptr[1]] & ctype_xdigit) != 0
1049 && MAX_255(ptr[2]) && (digitab[ptr[2]] & ctype_xdigit) != 0
1050 && MAX_255(ptr[3]) && (digitab[ptr[3]] & ctype_xdigit) != 0
1051 && MAX_255(ptr[4]) && (digitab[ptr[4]] & ctype_xdigit) != 0)
1052 {
1053 c = 0;
1054 for (i = 0; i < 4; ++i)
1055 {
1056 register pcre_uint32 cc = *(++ptr);
1057 #ifndef EBCDIC /* ASCII/UTF-8 coding */
1058 if (cc >= CHAR_a) cc -= 32; /* Convert to upper case */
1059 c = (c << 4) + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10));
1060 #else /* EBCDIC coding */
1061 if (cc >= CHAR_a && cc <= CHAR_z) cc += 64; /* Convert to upper case */
1062 c = (c << 4) + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10));
1063 #endif
1064 }
1065
1066 #if defined COMPILE_PCRE8
1067 if (c > (utf ? 0x10ffffU : 0xffU))
1068 #elif defined COMPILE_PCRE16
1069 if (c > (utf ? 0x10ffffU : 0xffffU))
1070 #elif defined COMPILE_PCRE32
1071 if (utf && c > 0x10ffffU)
1072 #endif
1073 {
1074 *errorcodeptr = ERR76;
1075 }
1076 else if (utf && c >= 0xd800 && c <= 0xdfff) *errorcodeptr = ERR73;
1077 }
1078 }
1079 else
1080 *errorcodeptr = ERR37;
1081 break;
1082
1083 case CHAR_U:
1084 /* In JavaScript, \U is an uppercase U letter. */
1085 if ((options & PCRE_JAVASCRIPT_COMPAT) == 0) *errorcodeptr = ERR37;
1086 break;
1087
1088 /* In a character class, \g is just a literal "g". Outside a character
1089 class, \g must be followed by one of a number of specific things:
1090
1091 (1) A number, either plain or braced. If positive, it is an absolute
1092 backreference. If negative, it is a relative backreference. This is a Perl
1093 5.10 feature.
1094
1095 (2) Perl 5.10 also supports \g{name} as a reference to a named group. This
1096 is part of Perl's movement towards a unified syntax for back references. As
1097 this is synonymous with \k{name}, we fudge it up by pretending it really
1098 was \k.
1099
1100 (3) For Oniguruma compatibility we also support \g followed by a name or a
1101 number either in angle brackets or in single quotes. However, these are
1102 (possibly recursive) subroutine calls, _not_ backreferences. Just return
1103 the ESC_g code (cf \k). */
1104
1105 case CHAR_g:
1106 if (isclass) break;
1107 if (ptr[1] == CHAR_LESS_THAN_SIGN || ptr[1] == CHAR_APOSTROPHE)
1108 {
1109 escape = ESC_g;
1110 break;
1111 }
1112
1113 /* Handle the Perl-compatible cases */
1114
1115 if (ptr[1] == CHAR_LEFT_CURLY_BRACKET)
1116 {
1117 const pcre_uchar *p;
1118 for (p = ptr+2; *p != CHAR_NULL && *p != CHAR_RIGHT_CURLY_BRACKET; p++)
1119 if (*p != CHAR_MINUS && !IS_DIGIT(*p)) break;
1120 if (*p != CHAR_NULL && *p != CHAR_RIGHT_CURLY_BRACKET)
1121 {
1122 escape = ESC_k;
1123 break;
1124 }
1125 braced = TRUE;
1126 ptr++;
1127 }
1128 else braced = FALSE;
1129
1130 if (ptr[1] == CHAR_MINUS)
1131 {
1132 negated = TRUE;
1133 ptr++;
1134 }
1135 else negated = FALSE;
1136
1137 /* The integer range is limited by the machine's int representation. */
1138 s = 0;
1139 overflow = FALSE;
1140 while (IS_DIGIT(ptr[1]))
1141 {
1142 if (s > INT_MAX / 10 - 1) /* Integer overflow */
1143 {
1144 overflow = TRUE;
1145 break;
1146 }
1147 s = s * 10 + (int)(*(++ptr) - CHAR_0);
1148 }
1149 if (overflow) /* Integer overflow */
1150 {
1151 while (IS_DIGIT(ptr[1]))
1152 ptr++;
1153 *errorcodeptr = ERR61;
1154 break;
1155 }
1156
1157 if (braced && *(++ptr) != CHAR_RIGHT_CURLY_BRACKET)
1158 {
1159 *errorcodeptr = ERR57;
1160 break;
1161 }
1162
1163 if (s == 0)
1164 {
1165 *errorcodeptr = ERR58;
1166 break;
1167 }
1168
1169 if (negated)
1170 {
1171 if (s > bracount)
1172 {
1173 *errorcodeptr = ERR15;
1174 break;
1175 }
1176 s = bracount - (s - 1);
1177 }
1178
1179 escape = -s;
1180 break;
1181
1182 /* The handling of escape sequences consisting of a string of digits
1183 starting with one that is not zero is not straightforward. Perl has changed
1184 over the years. Nowadays \g{} for backreferences and \o{} for octal are
1185 recommended to avoid the ambiguities in the old syntax.
1186
1187 Outside a character class, the digits are read as a decimal number. If the
1188 number is less than 8 (used to be 10), or if there are that many previous
1189 extracting left brackets, then it is a back reference. Otherwise, up to
1190 three octal digits are read to form an escaped byte. Thus \123 is likely to
1191 be octal 123 (cf \0123, which is octal 012 followed by the literal 3). If
1192 the octal value is greater than 377, the least significant 8 bits are
1193 taken. \8 and \9 are treated as the literal characters 8 and 9.
1194
1195 Inside a character class, \ followed by a digit is always either a literal
1196 8 or 9 or an octal number. */
1197
1198 case CHAR_1: case CHAR_2: case CHAR_3: case CHAR_4: case CHAR_5:
1199 case CHAR_6: case CHAR_7: case CHAR_8: case CHAR_9:
1200
1201 if (!isclass)
1202 {
1203 oldptr = ptr;
1204 /* The integer range is limited by the machine's int representation. */
1205 s = (int)(c -CHAR_0);
1206 overflow = FALSE;
1207 while (IS_DIGIT(ptr[1]))
1208 {
1209 if (s > INT_MAX / 10 - 1) /* Integer overflow */
1210 {
1211 overflow = TRUE;
1212 break;
1213 }
1214 s = s * 10 + (int)(*(++ptr) - CHAR_0);
1215 }
1216 if (overflow) /* Integer overflow */
1217 {
1218 while (IS_DIGIT(ptr[1]))
1219 ptr++;
1220 *errorcodeptr = ERR61;
1221 break;
1222 }
1223 if (s < 8 || s <= bracount) /* Check for back reference */
1224 {
1225 escape = -s;
1226 break;
1227 }
1228 ptr = oldptr; /* Put the pointer back and fall through */
1229 }
1230
1231 /* Handle a digit following \ when the number is not a back reference. If
1232 the first digit is 8 or 9, Perl used to generate a binary zero byte and
1233 then treat the digit as a following literal. At least by Perl 5.18 this
1234 changed so as not to insert the binary zero. */
1235
1236 if ((c = *ptr) >= CHAR_8) break;
1237
1238 /* Fall through with a digit less than 8 */
1239
1240 /* \0 always starts an octal number, but we may drop through to here with a
1241 larger first octal digit. The original code used just to take the least
1242 significant 8 bits of octal numbers (I think this is what early Perls used
1243 to do). Nowadays we allow for larger numbers in UTF-8 mode and 16-bit mode,
1244 but no more than 3 octal digits. */
1245
1246 case CHAR_0:
1247 c -= CHAR_0;
1248 while(i++ < 2 && ptr[1] >= CHAR_0 && ptr[1] <= CHAR_7)
1249 c = c * 8 + *(++ptr) - CHAR_0;
1250 #ifdef COMPILE_PCRE8
1251 if (!utf && c > 0xff) *errorcodeptr = ERR51;
1252 #endif
1253 break;
1254
1255 /* \o is a relatively new Perl feature, supporting a more general way of
1256 specifying character codes in octal. The only supported form is \o{ddd}. */
1257
1258 case CHAR_o:
1259 if (ptr[1] != CHAR_LEFT_CURLY_BRACKET) *errorcodeptr = ERR81; else
1260 {
1261 ptr += 2;
1262 c = 0;
1263 overflow = FALSE;
1264 while (*ptr >= CHAR_0 && *ptr <= CHAR_7)
1265 {
1266 register pcre_uint32 cc = *ptr++;
1267 if (c == 0 && cc == CHAR_0) continue; /* Leading zeroes */
1268 #ifdef COMPILE_PCRE32
1269 if (c >= 0x20000000l) { overflow = TRUE; break; }
1270 #endif
1271 c = (c << 3) + cc - CHAR_0 ;
1272 #if defined COMPILE_PCRE8
1273 if (c > (utf ? 0x10ffffU : 0xffU)) { overflow = TRUE; break; }
1274 #elif defined COMPILE_PCRE16
1275 if (c > (utf ? 0x10ffffU : 0xffffU)) { overflow = TRUE; break; }
1276 #elif defined COMPILE_PCRE32
1277 if (utf && c > 0x10ffffU) { overflow = TRUE; break; }
1278 #endif
1279 }
1280 if (overflow)
1281 {
1282 while (*ptr >= CHAR_0 && *ptr <= CHAR_7) ptr++;
1283 *errorcodeptr = ERR34;
1284 }
1285 else if (*ptr == CHAR_RIGHT_CURLY_BRACKET)
1286 {
1287 if (utf && c >= 0xd800 && c <= 0xdfff) *errorcodeptr = ERR73;
1288 }
1289 else *errorcodeptr = ERR80;
1290 }
1291 break;
1292
1293 /* \x is complicated. In JavaScript, \x must be followed by two hexadecimal
1294 numbers. Otherwise it is a lowercase x letter. */
1295
1296 case CHAR_x:
1297 if ((options & PCRE_JAVASCRIPT_COMPAT) != 0)
1298 {
1299 if (MAX_255(ptr[1]) && (digitab[ptr[1]] & ctype_xdigit) != 0
1300 && MAX_255(ptr[2]) && (digitab[ptr[2]] & ctype_xdigit) != 0)
1301 {
1302 c = 0;
1303 for (i = 0; i < 2; ++i)
1304 {
1305 register pcre_uint32 cc = *(++ptr);
1306 #ifndef EBCDIC /* ASCII/UTF-8 coding */
1307 if (cc >= CHAR_a) cc -= 32; /* Convert to upper case */
1308 c = (c << 4) + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10));
1309 #else /* EBCDIC coding */
1310 if (cc >= CHAR_a && cc <= CHAR_z) cc += 64; /* Convert to upper case */
1311 c = (c << 4) + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10));
1312 #endif
1313 }
1314 }
1315 } /* End JavaScript handling */
1316
1317 /* Handle \x in Perl's style. \x{ddd} is a character number which can be
1318 greater than 0xff in utf or non-8bit mode, but only if the ddd are hex
1319 digits. If not, { used to be treated as a data character. However, Perl
1320 seems to read hex digits up to the first non-such, and ignore the rest, so
1321 that, for example \x{zz} matches a binary zero. This seems crazy, so PCRE
1322 now gives an error. */
1323
1324 else
1325 {
1326 if (ptr[1] == CHAR_LEFT_CURLY_BRACKET)
1327 {
1328 ptr += 2;
1329 c = 0;
1330 overflow = FALSE;
1331 while (MAX_255(*ptr) && (digitab[*ptr] & ctype_xdigit) != 0)
1332 {
1333 register pcre_uint32 cc = *ptr++;
1334 if (c == 0 && cc == CHAR_0) continue; /* Leading zeroes */
1335
1336 #ifdef COMPILE_PCRE32
1337 if (c >= 0x10000000l) { overflow = TRUE; break; }
1338 #endif
1339
1340 #ifndef EBCDIC /* ASCII/UTF-8 coding */
1341 if (cc >= CHAR_a) cc -= 32; /* Convert to upper case */
1342 c = (c << 4) + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10));
1343 #else /* EBCDIC coding */
1344 if (cc >= CHAR_a && cc <= CHAR_z) cc += 64; /* Convert to upper case */
1345 c = (c << 4) + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10));
1346 #endif
1347
1348 #if defined COMPILE_PCRE8
1349 if (c > (utf ? 0x10ffffU : 0xffU)) { overflow = TRUE; break; }
1350 #elif defined COMPILE_PCRE16
1351 if (c > (utf ? 0x10ffffU : 0xffffU)) { overflow = TRUE; break; }
1352 #elif defined COMPILE_PCRE32
1353 if (utf && c > 0x10ffffU) { overflow = TRUE; break; }
1354 #endif
1355 }
1356
1357 if (overflow)
1358 {
1359 while (MAX_255(*ptr) && (digitab[*ptr] & ctype_xdigit) != 0) ptr++;
1360 *errorcodeptr = ERR34;
1361 }
1362
1363 else if (*ptr == CHAR_RIGHT_CURLY_BRACKET)
1364 {
1365 if (utf && c >= 0xd800 && c <= 0xdfff) *errorcodeptr = ERR73;
1366 }
1367
1368 /* If the sequence of hex digits does not end with '}', give an error.
1369 We used just to recognize this construct and fall through to the normal
1370 \x handling, but nowadays Perl gives an error, which seems much more
1371 sensible, so we do too. */
1372
1373 else *errorcodeptr = ERR79;
1374 } /* End of \x{} processing */
1375
1376 /* Read a single-byte hex-defined char (up to two hex digits after \x) */
1377
1378 else
1379 {
1380 c = 0;
1381 while (i++ < 2 && MAX_255(ptr[1]) && (digitab[ptr[1]] & ctype_xdigit) != 0)
1382 {
1383 pcre_uint32 cc; /* Some compilers don't like */
1384 cc = *(++ptr); /* ++ in initializers */
1385 #ifndef EBCDIC /* ASCII/UTF-8 coding */
1386 if (cc >= CHAR_a) cc -= 32; /* Convert to upper case */
1387 c = c * 16 + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10));
1388 #else /* EBCDIC coding */
1389 if (cc <= CHAR_z) cc += 64; /* Convert to upper case */
1390 c = c * 16 + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10));
1391 #endif
1392 }
1393 } /* End of \xdd handling */
1394 } /* End of Perl-style \x handling */
1395 break;
1396
1397 /* For \c, a following letter is upper-cased; then the 0x40 bit is flipped.
1398 An error is given if the byte following \c is not an ASCII character. This
1399 coding is ASCII-specific, but then the whole concept of \cx is
1400 ASCII-specific. (However, an EBCDIC equivalent has now been added.) */
1401
1402 case CHAR_c:
1403 c = *(++ptr);
1404 if (c == CHAR_NULL)
1405 {
1406 *errorcodeptr = ERR2;
1407 break;
1408 }
1409 #ifndef EBCDIC /* ASCII/UTF-8 coding */
1410 if (c > 127) /* Excludes all non-ASCII in either mode */
1411 {
1412 *errorcodeptr = ERR68;
1413 break;
1414 }
1415 if (c >= CHAR_a && c <= CHAR_z) c -= 32;
1416 c ^= 0x40;
1417 #else /* EBCDIC coding */
1418 if (c >= CHAR_a && c <= CHAR_z) c += 64;
1419 c ^= 0xC0;
1420 #endif
1421 break;
1422
1423 /* PCRE_EXTRA enables extensions to Perl in the matter of escapes. Any
1424 other alphanumeric following \ is an error if PCRE_EXTRA was set;
1425 otherwise, for Perl compatibility, it is a literal. This code looks a bit
1426 odd, but there used to be some cases other than the default, and there may
1427 be again in future, so I haven't "optimized" it. */
1428
1429 default:
1430 if ((options & PCRE_EXTRA) != 0) switch(c)
1431 {
1432 default:
1433 *errorcodeptr = ERR3;
1434 break;
1435 }
1436 break;
1437 }
1438 }
1439
1440 /* Perl supports \N{name} for character names, as well as plain \N for "not
1441 newline". PCRE does not support \N{name}. However, it does support
1442 quantification such as \N{2,3}. */
1443
1444 if (escape == ESC_N && ptr[1] == CHAR_LEFT_CURLY_BRACKET &&
1445 !is_counted_repeat(ptr+2))
1446 *errorcodeptr = ERR37;
1447
1448 /* If PCRE_UCP is set, we change the values for \d etc. */
1449
1450 if ((options & PCRE_UCP) != 0 && escape >= ESC_D && escape <= ESC_w)
1451 escape += (ESC_DU - ESC_D);
1452
1453 /* Set the pointer to the final character before returning. */
1454
1455 *ptrptr = ptr;
1456 *chptr = c;
1457 return escape;
1458 }
1459
1460
1461
1462 #ifdef SUPPORT_UCP
1463 /*************************************************
1464 * Handle \P and \p *
1465 *************************************************/
1466
1467 /* This function is called after \P or \p has been encountered, provided that
1468 PCRE is compiled with support for Unicode properties. On entry, ptrptr is
1469 pointing at the P or p. On exit, it is pointing at the final character of the
1470 escape sequence.
1471
1472 Argument:
1473 ptrptr points to the pattern position pointer
1474 negptr points to a boolean that is set TRUE for negation else FALSE
1475 ptypeptr points to an unsigned int that is set to the type value
1476 pdataptr points to an unsigned int that is set to the detailed property value
1477 errorcodeptr points to the error code variable
1478
1479 Returns: TRUE if the type value was found, or FALSE for an invalid type
1480 */
1481
1482 static BOOL
1483 get_ucp(const pcre_uchar **ptrptr, BOOL *negptr, unsigned int *ptypeptr,
1484 unsigned int *pdataptr, int *errorcodeptr)
1485 {
1486 pcre_uchar c;
1487 int i, bot, top;
1488 const pcre_uchar *ptr = *ptrptr;
1489 pcre_uchar name[32];
1490
1491 c = *(++ptr);
1492 if (c == CHAR_NULL) goto ERROR_RETURN;
1493
1494 *negptr = FALSE;
1495
1496 /* \P or \p can be followed by a name in {}, optionally preceded by ^ for
1497 negation. */
1498
1499 if (c == CHAR_LEFT_CURLY_BRACKET)
1500 {
1501 if (ptr[1] == CHAR_CIRCUMFLEX_ACCENT)
1502 {
1503 *negptr = TRUE;
1504 ptr++;
1505 }
1506 for (i = 0; i < (int)(sizeof(name) / sizeof(pcre_uchar)) - 1; i++)
1507 {
1508 c = *(++ptr);
1509 if (c == CHAR_NULL) goto ERROR_RETURN;
1510 if (c == CHAR_RIGHT_CURLY_BRACKET) break;
1511 name[i] = c;
1512 }
1513 if (c != CHAR_RIGHT_CURLY_BRACKET) goto ERROR_RETURN;
1514 name[i] = 0;
1515 }
1516
1517 /* Otherwise there is just one following character */
1518
1519 else
1520 {
1521 name[0] = c;
1522 name[1] = 0;
1523 }
1524
1525 *ptrptr = ptr;
1526
1527 /* Search for a recognized property name using binary chop */
1528
1529 bot = 0;
1530 top = PRIV(utt_size);
1531
1532 while (bot < top)
1533 {
1534 int r;
1535 i = (bot + top) >> 1;
1536 r = STRCMP_UC_C8(name, PRIV(utt_names) + PRIV(utt)[i].name_offset);
1537 if (r == 0)
1538 {
1539 *ptypeptr = PRIV(utt)[i].type;
1540 *pdataptr = PRIV(utt)[i].value;
1541 return TRUE;
1542 }
1543 if (r > 0) bot = i + 1; else top = i;
1544 }
1545
1546 *errorcodeptr = ERR47;
1547 *ptrptr = ptr;
1548 return FALSE;
1549
1550 ERROR_RETURN:
1551 *errorcodeptr = ERR46;
1552 *ptrptr = ptr;
1553 return FALSE;
1554 }
1555 #endif
1556
1557
1558
1559 /*************************************************
1560 * Read repeat counts *
1561 *************************************************/
1562
1563 /* Read an item of the form {n,m} and return the values. This is called only
1564 after is_counted_repeat() has confirmed that a repeat-count quantifier exists,
1565 so the syntax is guaranteed to be correct, but we need to check the values.
1566
1567 Arguments:
1568 p pointer to first char after '{'
1569 minp pointer to int for min
1570 maxp pointer to int for max
1571 returned as -1 if no max
1572 errorcodeptr points to error code variable
1573
1574 Returns: pointer to '}' on success;
1575 current ptr on error, with errorcodeptr set non-zero
1576 */
1577
1578 static const pcre_uchar *
1579 read_repeat_counts(const pcre_uchar *p, int *minp, int *maxp, int *errorcodeptr)
1580 {
1581 int min = 0;
1582 int max = -1;
1583
1584 /* Read the minimum value and do a paranoid check: a negative value indicates
1585 an integer overflow. */
1586
1587 while (IS_DIGIT(*p)) min = min * 10 + (int)(*p++ - CHAR_0);
1588 if (min < 0 || min > 65535)
1589 {
1590 *errorcodeptr = ERR5;
1591 return p;
1592 }
1593
1594 /* Read the maximum value if there is one, and again do a paranoid on its size.
1595 Also, max must not be less than min. */
1596
1597 if (*p == CHAR_RIGHT_CURLY_BRACKET) max = min; else
1598 {
1599 if (*(++p) != CHAR_RIGHT_CURLY_BRACKET)
1600 {
1601 max = 0;
1602 while(IS_DIGIT(*p)) max = max * 10 + (int)(*p++ - CHAR_0);
1603 if (max < 0 || max > 65535)
1604 {
1605 *errorcodeptr = ERR5;
1606 return p;
1607 }
1608 if (max < min)
1609 {
1610 *errorcodeptr = ERR4;
1611 return p;
1612 }
1613 }
1614 }
1615
1616 /* Fill in the required variables, and pass back the pointer to the terminating
1617 '}'. */
1618
1619 *minp = min;
1620 *maxp = max;
1621 return p;
1622 }
1623
1624
1625
1626 /*************************************************
1627 * Find first significant op code *
1628 *************************************************/
1629
1630 /* This is called by several functions that scan a compiled expression looking
1631 for a fixed first character, or an anchoring op code etc. It skips over things
1632 that do not influence this. For some calls, it makes sense to skip negative
1633 forward and all backward assertions, and also the \b assertion; for others it
1634 does not.
1635
1636 Arguments:
1637 code pointer to the start of the group
1638 skipassert TRUE if certain assertions are to be skipped
1639
1640 Returns: pointer to the first significant opcode
1641 */
1642
1643 static const pcre_uchar*
1644 first_significant_code(const pcre_uchar *code, BOOL skipassert)
1645 {
1646 for (;;)
1647 {
1648 switch ((int)*code)
1649 {
1650 case OP_ASSERT_NOT:
1651 case OP_ASSERTBACK:
1652 case OP_ASSERTBACK_NOT:
1653 if (!skipassert) return code;
1654 do code += GET(code, 1); while (*code == OP_ALT);
1655 code += PRIV(OP_lengths)[*code];
1656 break;
1657
1658 case OP_WORD_BOUNDARY:
1659 case OP_NOT_WORD_BOUNDARY:
1660 if (!skipassert) return code;
1661 /* Fall through */
1662
1663 case OP_CALLOUT:
1664 case OP_CREF:
1665 case OP_DNCREF:
1666 case OP_RREF:
1667 case OP_DNRREF:
1668 case OP_DEF:
1669 code += PRIV(OP_lengths)[*code];
1670 break;
1671
1672 default:
1673 return code;
1674 }
1675 }
1676 /* Control never reaches here */
1677 }
1678
1679
1680
1681 /*************************************************
1682 * Find the fixed length of a branch *
1683 *************************************************/
1684
1685 /* Scan a branch and compute the fixed length of subject that will match it,
1686 if the length is fixed. This is needed for dealing with backward assertions.
1687 In UTF8 mode, the result is in characters rather than bytes. The branch is
1688 temporarily terminated with OP_END when this function is called.
1689
1690 This function is called when a backward assertion is encountered, so that if it
1691 fails, the error message can point to the correct place in the pattern.
1692 However, we cannot do this when the assertion contains subroutine calls,
1693 because they can be forward references. We solve this by remembering this case
1694 and doing the check at the end; a flag specifies which mode we are running in.
1695
1696 Arguments:
1697 code points to the start of the pattern (the bracket)
1698 utf TRUE in UTF-8 / UTF-16 / UTF-32 mode
1699 atend TRUE if called when the pattern is complete
1700 cd the "compile data" structure
1701
1702 Returns: the fixed length,
1703 or -1 if there is no fixed length,
1704 or -2 if \C was encountered (in UTF-8 mode only)
1705 or -3 if an OP_RECURSE item was encountered and atend is FALSE
1706 or -4 if an unknown opcode was encountered (internal error)
1707 */
1708
1709 static int
1710 find_fixedlength(pcre_uchar *code, BOOL utf, BOOL atend, compile_data *cd)
1711 {
1712 int length = -1;
1713
1714 register int branchlength = 0;
1715 register pcre_uchar *cc = code + 1 + LINK_SIZE;
1716
1717 /* Scan along the opcodes for this branch. If we get to the end of the
1718 branch, check the length against that of the other branches. */
1719
1720 for (;;)
1721 {
1722 int d;
1723 pcre_uchar *ce, *cs;
1724 register pcre_uchar op = *cc;
1725
1726 switch (op)
1727 {
1728 /* We only need to continue for OP_CBRA (normal capturing bracket) and
1729 OP_BRA (normal non-capturing bracket) because the other variants of these
1730 opcodes are all concerned with unlimited repeated groups, which of course
1731 are not of fixed length. */
1732
1733 case OP_CBRA:
1734 case OP_BRA:
1735 case OP_ONCE:
1736 case OP_ONCE_NC:
1737 case OP_COND:
1738 d = find_fixedlength(cc + ((op == OP_CBRA)? IMM2_SIZE : 0), utf, atend, cd);
1739 if (d < 0) return d;
1740 branchlength += d;
1741 do cc += GET(cc, 1); while (*cc == OP_ALT);
1742 cc += 1 + LINK_SIZE;
1743 break;
1744
1745 /* Reached end of a branch; if it's a ket it is the end of a nested call.
1746 If it's ALT it is an alternation in a nested call. An ACCEPT is effectively
1747 an ALT. If it is END it's the end of the outer call. All can be handled by
1748 the same code. Note that we must not include the OP_KETRxxx opcodes here,
1749 because they all imply an unlimited repeat. */
1750
1751 case OP_ALT:
1752 case OP_KET:
1753 case OP_END:
1754 case OP_ACCEPT:
1755 case OP_ASSERT_ACCEPT:
1756 if (length < 0) length = branchlength;
1757 else if (length != branchlength) return -1;
1758 if (*cc != OP_ALT) return length;
1759 cc += 1 + LINK_SIZE;
1760 branchlength = 0;
1761 break;
1762
1763 /* A true recursion implies not fixed length, but a subroutine call may
1764 be OK. If the subroutine is a forward reference, we can't deal with
1765 it until the end of the pattern, so return -3. */
1766
1767 case OP_RECURSE:
1768 if (!atend) return -3;
1769 cs = ce = (pcre_uchar *)cd->start_code + GET(cc, 1); /* Start subpattern */
1770 do ce += GET(ce, 1); while (*ce == OP_ALT); /* End subpattern */
1771 if (cc > cs && cc < ce) return -1; /* Recursion */
1772 d = find_fixedlength(cs + IMM2_SIZE, utf, atend, cd);
1773 if (d < 0) return d;
1774 branchlength += d;
1775 cc += 1 + LINK_SIZE;
1776 break;
1777
1778 /* Skip over assertive subpatterns */
1779
1780 case OP_ASSERT:
1781 case OP_ASSERT_NOT:
1782 case OP_ASSERTBACK:
1783 case OP_ASSERTBACK_NOT:
1784 do cc += GET(cc, 1); while (*cc == OP_ALT);
1785 cc += PRIV(OP_lengths)[*cc];
1786 break;
1787
1788 /* Skip over things that don't match chars */
1789
1790 case OP_MARK:
1791 case OP_PRUNE_ARG:
1792 case OP_SKIP_ARG:
1793 case OP_THEN_ARG:
1794 cc += cc[1] + PRIV(OP_lengths)[*cc];
1795 break;
1796
1797 case OP_CALLOUT:
1798 case OP_CIRC:
1799 case OP_CIRCM:
1800 case OP_CLOSE:
1801 case OP_COMMIT:
1802 case OP_CREF:
1803 case OP_DEF:
1804 case OP_DNCREF:
1805 case OP_DNRREF:
1806 case OP_DOLL:
1807 case OP_DOLLM:
1808 case OP_EOD:
1809 case OP_EODN:
1810 case OP_FAIL:
1811 case OP_NOT_WORD_BOUNDARY:
1812 case OP_PRUNE:
1813 case OP_REVERSE:
1814 case OP_RREF:
1815 case OP_SET_SOM:
1816 case OP_SKIP:
1817 case OP_SOD:
1818 case OP_SOM:
1819 case OP_THEN:
1820 case OP_WORD_BOUNDARY:
1821 cc += PRIV(OP_lengths)[*cc];
1822 break;
1823
1824 /* Handle literal characters */
1825
1826 case OP_CHAR:
1827 case OP_CHARI:
1828 case OP_NOT:
1829 case OP_NOTI:
1830 branchlength++;
1831 cc += 2;
1832 #ifdef SUPPORT_UTF
1833 if (utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]);
1834 #endif
1835 break;
1836
1837 /* Handle exact repetitions. The count is already in characters, but we
1838 need to skip over a multibyte character in UTF8 mode. */
1839
1840 case OP_EXACT:
1841 case OP_EXACTI:
1842 case OP_NOTEXACT:
1843 case OP_NOTEXACTI:
1844 branchlength += (int)GET2(cc,1);
1845 cc += 2 + IMM2_SIZE;
1846 #ifdef SUPPORT_UTF
1847 if (utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]);
1848 #endif
1849 break;
1850
1851 case OP_TYPEEXACT:
1852 branchlength += GET2(cc,1);
1853 if (cc[1 + IMM2_SIZE] == OP_PROP || cc[1 + IMM2_SIZE] == OP_NOTPROP)
1854 cc += 2;
1855 cc += 1 + IMM2_SIZE + 1;
1856 break;
1857
1858 /* Handle single-char matchers */
1859
1860 case OP_PROP:
1861 case OP_NOTPROP:
1862 cc += 2;
1863 /* Fall through */
1864
1865 case OP_HSPACE:
1866 case OP_VSPACE:
1867 case OP_NOT_HSPACE:
1868 case OP_NOT_VSPACE:
1869 case OP_NOT_DIGIT:
1870 case OP_DIGIT:
1871 case OP_NOT_WHITESPACE:
1872 case OP_WHITESPACE:
1873 case OP_NOT_WORDCHAR:
1874 case OP_WORDCHAR:
1875 case OP_ANY:
1876 case OP_ALLANY:
1877 branchlength++;
1878 cc++;
1879 break;
1880
1881 /* The single-byte matcher isn't allowed. This only happens in UTF-8 mode;
1882 otherwise \C is coded as OP_ALLANY. */
1883
1884 case OP_ANYBYTE:
1885 return -2;
1886
1887 /* Check a class for variable quantification */
1888
1889 case OP_CLASS:
1890 case OP_NCLASS:
1891 #if defined SUPPORT_UTF || defined COMPILE_PCRE16 || defined COMPILE_PCRE32
1892 case OP_XCLASS:
1893 /* The original code caused an unsigned overflow in 64 bit systems,
1894 so now we use a conditional statement. */
1895 if (op == OP_XCLASS)
1896 cc += GET(cc, 1);
1897 else
1898 cc += PRIV(OP_lengths)[OP_CLASS];
1899 #else
1900 cc += PRIV(OP_lengths)[OP_CLASS];
1901 #endif
1902
1903 switch (*cc)
1904 {
1905 case OP_CRSTAR:
1906 case OP_CRMINSTAR:
1907 case OP_CRPLUS:
1908 case OP_CRMINPLUS:
1909 case OP_CRQUERY:
1910 case OP_CRMINQUERY:
1911 case OP_CRPOSSTAR:
1912 case OP_CRPOSPLUS:
1913 case OP_CRPOSQUERY:
1914 return -1;
1915
1916 case OP_CRRANGE:
1917 case OP_CRMINRANGE:
1918 case OP_CRPOSRANGE:
1919 if (GET2(cc,1) != GET2(cc,1+IMM2_SIZE)) return -1;
1920 branchlength += (int)GET2(cc,1);
1921 cc += 1 + 2 * IMM2_SIZE;
1922 break;
1923
1924 default:
1925 branchlength++;
1926 }
1927 break;
1928
1929 /* Anything else is variable length */
1930
1931 case OP_ANYNL:
1932 case OP_BRAMINZERO:
1933 case OP_BRAPOS:
1934 case OP_BRAPOSZERO:
1935 case OP_BRAZERO:
1936 case OP_CBRAPOS:
1937 case OP_EXTUNI:
1938 case OP_KETRMAX:
1939 case OP_KETRMIN:
1940 case OP_KETRPOS:
1941 case OP_MINPLUS:
1942 case OP_MINPLUSI:
1943 case OP_MINQUERY:
1944 case OP_MINQUERYI:
1945 case OP_MINSTAR:
1946 case OP_MINSTARI:
1947 case OP_MINUPTO:
1948 case OP_MINUPTOI:
1949 case OP_NOTMINPLUS:
1950 case OP_NOTMINPLUSI:
1951 case OP_NOTMINQUERY:
1952 case OP_NOTMINQUERYI:
1953 case OP_NOTMINSTAR:
1954 case OP_NOTMINSTARI:
1955 case OP_NOTMINUPTO:
1956 case OP_NOTMINUPTOI:
1957 case OP_NOTPLUS:
1958 case OP_NOTPLUSI:
1959 case OP_NOTPOSPLUS:
1960 case OP_NOTPOSPLUSI:
1961 case OP_NOTPOSQUERY:
1962 case OP_NOTPOSQUERYI:
1963 case OP_NOTPOSSTAR:
1964 case OP_NOTPOSSTARI:
1965 case OP_NOTPOSUPTO:
1966 case OP_NOTPOSUPTOI:
1967 case OP_NOTQUERY:
1968 case OP_NOTQUERYI:
1969 case OP_NOTSTAR:
1970 case OP_NOTSTARI:
1971 case OP_NOTUPTO:
1972 case OP_NOTUPTOI:
1973 case OP_PLUS:
1974 case OP_PLUSI:
1975 case OP_POSPLUS:
1976 case OP_POSPLUSI:
1977 case OP_POSQUERY:
1978 case OP_POSQUERYI:
1979 case OP_POSSTAR:
1980 case OP_POSSTARI:
1981 case OP_POSUPTO:
1982 case OP_POSUPTOI:
1983 case OP_QUERY:
1984 case OP_QUERYI:
1985 case OP_REF:
1986 case OP_REFI:
1987 case OP_DNREF:
1988 case OP_DNREFI:
1989 case OP_SBRA:
1990 case OP_SBRAPOS:
1991 case OP_SCBRA:
1992 case OP_SCBRAPOS:
1993 case OP_SCOND:
1994 case OP_SKIPZERO:
1995 case OP_STAR:
1996 case OP_STARI:
1997 case OP_TYPEMINPLUS:
1998 case OP_TYPEMINQUERY:
1999 case OP_TYPEMINSTAR:
2000 case OP_TYPEMINUPTO:
2001 case OP_TYPEPLUS:
2002 case OP_TYPEPOSPLUS:
2003 case OP_TYPEPOSQUERY:
2004 case OP_TYPEPOSSTAR:
2005 case OP_TYPEPOSUPTO:
2006 case OP_TYPEQUERY:
2007 case OP_TYPESTAR:
2008 case OP_TYPEUPTO:
2009 case OP_UPTO:
2010 case OP_UPTOI:
2011 return -1;
2012
2013 /* Catch unrecognized opcodes so that when new ones are added they
2014 are not forgotten, as has happened in the past. */
2015
2016 default:
2017 return -4;
2018 }
2019 }
2020 /* Control never gets here */
2021 }
2022
2023
2024
2025 /*************************************************
2026 * Scan compiled regex for specific bracket *
2027 *************************************************/
2028
2029 /* This little function scans through a compiled pattern until it finds a
2030 capturing bracket with the given number, or, if the number is negative, an
2031 instance of OP_REVERSE for a lookbehind. The function is global in the C sense
2032 so that it can be called from pcre_study() when finding the minimum matching
2033 length.
2034
2035 Arguments:
2036 code points to start of expression
2037 utf TRUE in UTF-8 / UTF-16 / UTF-32 mode
2038 number the required bracket number or negative to find a lookbehind
2039
2040 Returns: pointer to the opcode for the bracket, or NULL if not found
2041 */
2042
2043 const pcre_uchar *
2044 PRIV(find_bracket)(const pcre_uchar *code, BOOL utf, int number)
2045 {
2046 for (;;)
2047 {
2048 register pcre_uchar c = *code;
2049
2050 if (c == OP_END) return NULL;
2051
2052 /* XCLASS is used for classes that cannot be represented just by a bit
2053 map. This includes negated single high-valued characters. The length in
2054 the table is zero; the actual length is stored in the compiled code. */
2055
2056 if (c == OP_XCLASS) code += GET(code, 1);
2057
2058 /* Handle recursion */
2059
2060 else if (c == OP_REVERSE)
2061 {
2062 if (number < 0) return (pcre_uchar *)code;
2063 code += PRIV(OP_lengths)[c];
2064 }
2065
2066 /* Handle capturing bracket */
2067
2068 else if (c == OP_CBRA || c == OP_SCBRA ||
2069 c == OP_CBRAPOS || c == OP_SCBRAPOS)
2070 {
2071 int n = (int)GET2(code, 1+LINK_SIZE);
2072 if (n == number) return (pcre_uchar *)code;
2073 code += PRIV(OP_lengths)[c];
2074 }
2075
2076 /* Otherwise, we can get the item's length from the table, except that for
2077 repeated character types, we have to test for \p and \P, which have an extra
2078 two bytes of parameters, and for MARK/PRUNE/SKIP/THEN with an argument, we
2079 must add in its length. */
2080
2081 else
2082 {
2083 switch(c)
2084 {
2085 case OP_TYPESTAR:
2086 case OP_TYPEMINSTAR:
2087 case OP_TYPEPLUS:
2088 case OP_TYPEMINPLUS:
2089 case OP_TYPEQUERY:
2090 case OP_TYPEMINQUERY:
2091 case OP_TYPEPOSSTAR:
2092 case OP_TYPEPOSPLUS:
2093 case OP_TYPEPOSQUERY:
2094 if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
2095 break;
2096
2097 case OP_TYPEUPTO:
2098 case OP_TYPEMINUPTO:
2099 case OP_TYPEEXACT:
2100 case OP_TYPEPOSUPTO:
2101 if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP)
2102 code += 2;
2103 break;
2104
2105 case OP_MARK:
2106 case OP_PRUNE_ARG:
2107 case OP_SKIP_ARG:
2108 case OP_THEN_ARG:
2109 code += code[1];
2110 break;
2111 }
2112
2113 /* Add in the fixed length from the table */
2114
2115 code += PRIV(OP_lengths)[c];
2116
2117 /* In UTF-8 mode, opcodes that are followed by a character may be followed by
2118 a multi-byte character. The length in the table is a minimum, so we have to
2119 arrange to skip the extra bytes. */
2120
2121 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
2122 if (utf) switch(c)
2123 {
2124 case OP_CHAR:
2125 case OP_CHARI:
2126 case OP_EXACT:
2127 case OP_EXACTI:
2128 case OP_UPTO:
2129 case OP_UPTOI:
2130 case OP_MINUPTO:
2131 case OP_MINUPTOI:
2132 case OP_POSUPTO:
2133 case OP_POSUPTOI:
2134 case OP_STAR:
2135 case OP_STARI:
2136 case OP_MINSTAR:
2137 case OP_MINSTARI:
2138 case OP_POSSTAR:
2139 case OP_POSSTARI:
2140 case OP_PLUS:
2141 case OP_PLUSI:
2142 case OP_MINPLUS:
2143 case OP_MINPLUSI:
2144 case OP_POSPLUS:
2145 case OP_POSPLUSI:
2146 case OP_QUERY:
2147 case OP_QUERYI:
2148 case OP_MINQUERY:
2149 case OP_MINQUERYI:
2150 case OP_POSQUERY:
2151 case OP_POSQUERYI:
2152 if (HAS_EXTRALEN(code[-1])) code += GET_EXTRALEN(code[-1]);
2153 break;
2154 }
2155 #else
2156 (void)(utf); /* Keep compiler happy by referencing function argument */
2157 #endif
2158 }
2159 }
2160 }
2161
2162
2163
2164 /*************************************************
2165 * Scan compiled regex for recursion reference *
2166 *************************************************/
2167
2168 /* This little function scans through a compiled pattern until it finds an
2169 instance of OP_RECURSE.
2170
2171 Arguments:
2172 code points to start of expression
2173 utf TRUE in UTF-8 / UTF-16 / UTF-32 mode
2174
2175 Returns: pointer to the opcode for OP_RECURSE, or NULL if not found
2176 */
2177
2178 static const pcre_uchar *
2179 find_recurse(const pcre_uchar *code, BOOL utf)
2180 {
2181 for (;;)
2182 {
2183 register pcre_uchar c = *code;
2184 if (c == OP_END) return NULL;
2185 if (c == OP_RECURSE) return code;
2186
2187 /* XCLASS is used for classes that cannot be represented just by a bit
2188 map. This includes negated single high-valued characters. The length in
2189 the table is zero; the actual length is stored in the compiled code. */
2190
2191 if (c == OP_XCLASS) code += GET(code, 1);
2192
2193 /* Otherwise, we can get the item's length from the table, except that for
2194 repeated character types, we have to test for \p and \P, which have an extra
2195 two bytes of parameters, and for MARK/PRUNE/SKIP/THEN with an argument, we
2196 must add in its length. */
2197
2198 else
2199 {
2200 switch(c)
2201 {
2202 case OP_TYPESTAR:
2203 case OP_TYPEMINSTAR:
2204 case OP_TYPEPLUS:
2205 case OP_TYPEMINPLUS:
2206 case OP_TYPEQUERY:
2207 case OP_TYPEMINQUERY:
2208 case OP_TYPEPOSSTAR:
2209 case OP_TYPEPOSPLUS:
2210 case OP_TYPEPOSQUERY:
2211 if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
2212 break;
2213
2214 case OP_TYPEPOSUPTO:
2215 case OP_TYPEUPTO:
2216 case OP_TYPEMINUPTO:
2217 case OP_TYPEEXACT:
2218 if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP)
2219 code += 2;
2220 break;
2221
2222 case OP_MARK:
2223 case OP_PRUNE_ARG:
2224 case OP_SKIP_ARG:
2225 case OP_THEN_ARG:
2226 code += code[1];
2227 break;
2228 }
2229
2230 /* Add in the fixed length from the table */
2231
2232 code += PRIV(OP_lengths)[c];
2233
2234 /* In UTF-8 mode, opcodes that are followed by a character may be followed
2235 by a multi-byte character. The length in the table is a minimum, so we have
2236 to arrange to skip the extra bytes. */
2237
2238 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
2239 if (utf) switch(c)
2240 {
2241 case OP_CHAR:
2242 case OP_CHARI:
2243 case OP_NOT:
2244 case OP_NOTI:
2245 case OP_EXACT:
2246 case OP_EXACTI:
2247 case OP_NOTEXACT:
2248 case OP_NOTEXACTI:
2249 case OP_UPTO:
2250 case OP_UPTOI:
2251 case OP_NOTUPTO:
2252 case OP_NOTUPTOI:
2253 case OP_MINUPTO:
2254 case OP_MINUPTOI:
2255 case OP_NOTMINUPTO:
2256 case OP_NOTMINUPTOI:
2257 case OP_POSUPTO:
2258 case OP_POSUPTOI:
2259 case OP_NOTPOSUPTO:
2260 case OP_NOTPOSUPTOI:
2261 case OP_STAR:
2262 case OP_STARI:
2263 case OP_NOTSTAR:
2264 case OP_NOTSTARI:
2265 case OP_MINSTAR:
2266 case OP_MINSTARI:
2267 case OP_NOTMINSTAR:
2268 case OP_NOTMINSTARI:
2269 case OP_POSSTAR:
2270 case OP_POSSTARI:
2271 case OP_NOTPOSSTAR:
2272 case OP_NOTPOSSTARI:
2273 case OP_PLUS:
2274 case OP_PLUSI:
2275 case OP_NOTPLUS:
2276 case OP_NOTPLUSI:
2277 case OP_MINPLUS:
2278 case OP_MINPLUSI:
2279 case OP_NOTMINPLUS:
2280 case OP_NOTMINPLUSI:
2281 case OP_POSPLUS:
2282 case OP_POSPLUSI:
2283 case OP_NOTPOSPLUS:
2284 case OP_NOTPOSPLUSI:
2285 case OP_QUERY:
2286 case OP_QUERYI:
2287 case OP_NOTQUERY:
2288 case OP_NOTQUERYI:
2289 case OP_MINQUERY:
2290 case OP_MINQUERYI:
2291 case OP_NOTMINQUERY:
2292 case OP_NOTMINQUERYI:
2293 case OP_POSQUERY:
2294 case OP_POSQUERYI:
2295 case OP_NOTPOSQUERY:
2296 case OP_NOTPOSQUERYI:
2297 if (HAS_EXTRALEN(code[-1])) code += GET_EXTRALEN(code[-1]);
2298 break;
2299 }
2300 #else
2301 (void)(utf); /* Keep compiler happy by referencing function argument */
2302 #endif
2303 }
2304 }
2305 }
2306
2307
2308
2309 /*************************************************
2310 * Scan compiled branch for non-emptiness *
2311 *************************************************/
2312
2313 /* This function scans through a branch of a compiled pattern to see whether it
2314 can match the empty string or not. It is called from could_be_empty()
2315 below and from compile_branch() when checking for an unlimited repeat of a
2316 group that can match nothing. Note that first_significant_code() skips over
2317 backward and negative forward assertions when its final argument is TRUE. If we
2318 hit an unclosed bracket, we return "empty" - this means we've struck an inner
2319 bracket whose current branch will already have been scanned.
2320
2321 Arguments:
2322 code points to start of search
2323 endcode points to where to stop
2324 utf TRUE if in UTF-8 / UTF-16 / UTF-32 mode
2325 cd contains pointers to tables etc.
2326 recurses chain of recurse_check to catch mutual recursion
2327
2328 Returns: TRUE if what is matched could be empty
2329 */
2330
2331 typedef struct recurse_check {
2332 struct recurse_check *prev;
2333 const pcre_uchar *group;
2334 } recurse_check;
2335
2336 static BOOL
2337 could_be_empty_branch(const pcre_uchar *code, const pcre_uchar *endcode,
2338 BOOL utf, compile_data *cd, recurse_check *recurses)
2339 {
2340 register pcre_uchar c;
2341 recurse_check this_recurse;
2342
2343 for (code = first_significant_code(code + PRIV(OP_lengths)[*code], TRUE);
2344 code < endcode;
2345 code = first_significant_code(code + PRIV(OP_lengths)[c], TRUE))
2346 {
2347 const pcre_uchar *ccode;
2348
2349 c = *code;
2350
2351 /* Skip over forward assertions; the other assertions are skipped by
2352 first_significant_code() with a TRUE final argument. */
2353
2354 if (c == OP_ASSERT)
2355 {
2356 do code += GET(code, 1); while (*code == OP_ALT);
2357 c = *code;
2358 continue;
2359 }
2360
2361 /* For a recursion/subroutine call, if its end has been reached, which
2362 implies a backward reference subroutine call, we can scan it. If it's a
2363 forward reference subroutine call, we can't. To detect forward reference
2364 we have to scan up the list that is kept in the workspace. This function is
2365 called only when doing the real compile, not during the pre-compile that
2366 measures the size of the compiled pattern. */
2367
2368 if (c == OP_RECURSE)
2369 {
2370 const pcre_uchar *scode = cd->start_code + GET(code, 1);
2371 BOOL empty_branch;
2372
2373 /* Test for forward reference or uncompleted reference. This is disabled
2374 when called to scan a completed pattern by setting cd->start_workspace to
2375 NULL. */
2376
2377 if (cd->start_workspace != NULL)
2378 {
2379 const pcre_uchar *tcode;
2380 for (tcode = cd->start_workspace; tcode < cd->hwm; tcode += LINK_SIZE)
2381 if ((int)GET(tcode, 0) == (int)(code + 1 - cd->start_code)) return TRUE;
2382 if (GET(scode, 1) == 0) return TRUE; /* Unclosed */
2383 }
2384
2385 /* If we are scanning a completed pattern, there are no forward references
2386 and all groups are complete. We need to detect whether this is a recursive
2387 call, as otherwise there will be an infinite loop. If it is a recursion,
2388 just skip over it. Simple recursions are easily detected. For mutual
2389 recursions we keep a chain on the stack. */
2390
2391 else
2392 {
2393 recurse_check *r = recurses;
2394 const pcre_uchar *endgroup = scode;
2395
2396 do endgroup += GET(endgroup, 1); while (*endgroup == OP_ALT);
2397 if (code >= scode && code <= endgroup) continue; /* Simple recursion */
2398
2399 for (r = recurses; r != NULL; r = r->prev)
2400 if (r->group == scode) break;
2401 if (r != NULL) continue; /* Mutual recursion */
2402 }
2403
2404 /* Completed reference; scan the referenced group, remembering it on the
2405 stack chain to detect mutual recursions. */
2406
2407 empty_branch = FALSE;
2408 this_recurse.prev = recurses;
2409 this_recurse.group = scode;
2410
2411 do
2412 {
2413 if (could_be_empty_branch(scode, endcode, utf, cd, &this_recurse))
2414 {
2415 empty_branch = TRUE;
2416 break;
2417 }
2418 scode += GET(scode, 1);
2419 }
2420 while (*scode == OP_ALT);
2421
2422 if (!empty_branch) return FALSE; /* All branches are non-empty */
2423 continue;
2424 }
2425
2426 /* Groups with zero repeats can of course be empty; skip them. */
2427
2428 if (c == OP_BRAZERO || c == OP_BRAMINZERO || c == OP_SKIPZERO ||
2429 c == OP_BRAPOSZERO)
2430 {
2431 code += PRIV(OP_lengths)[c];
2432 do code += GET(code, 1); while (*code == OP_ALT);
2433 c = *code;
2434 continue;
2435 }
2436
2437 /* A nested group that is already marked as "could be empty" can just be
2438 skipped. */
2439
2440 if (c == OP_SBRA || c == OP_SBRAPOS ||
2441 c == OP_SCBRA || c == OP_SCBRAPOS)
2442 {
2443 do code += GET(code, 1); while (*code == OP_ALT);
2444 c = *code;
2445 continue;
2446 }
2447
2448 /* For other groups, scan the branches. */
2449
2450 if (c == OP_BRA || c == OP_BRAPOS ||
2451 c == OP_CBRA || c == OP_CBRAPOS ||
2452 c == OP_ONCE || c == OP_ONCE_NC ||
2453 c == OP_COND)
2454 {
2455 BOOL empty_branch;
2456 if (GET(code, 1) == 0) return TRUE; /* Hit unclosed bracket */
2457
2458 /* If a conditional group has only one branch, there is a second, implied,
2459 empty branch, so just skip over the conditional, because it could be empty.
2460 Otherwise, scan the individual branches of the group. */
2461
2462 if (c == OP_COND && code[GET(code, 1)] != OP_ALT)
2463 code += GET(code, 1);
2464 else
2465 {
2466 empty_branch = FALSE;
2467 do
2468 {
2469 if (!empty_branch && could_be_empty_branch(code, endcode, utf, cd, NULL))
2470 empty_branch = TRUE;
2471 code += GET(code, 1);
2472 }
2473 while (*code == OP_ALT);
2474 if (!empty_branch) return FALSE; /* All branches are non-empty */
2475 }
2476
2477 c = *code;
2478 continue;
2479 }
2480
2481 /* Handle the other opcodes */
2482
2483 switch (c)
2484 {
2485 /* Check for quantifiers after a class. XCLASS is used for classes that
2486 cannot be represented just by a bit map. This includes negated single
2487 high-valued characters. The length in PRIV(OP_lengths)[] is zero; the
2488 actual length is stored in the compiled code, so we must update "code"
2489 here. */
2490
2491 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
2492 case OP_XCLASS:
2493 ccode = code += GET(code, 1);
2494 goto CHECK_CLASS_REPEAT;
2495 #endif
2496
2497 case OP_CLASS:
2498 case OP_NCLASS:
2499 ccode = code + PRIV(OP_lengths)[OP_CLASS];
2500
2501 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
2502 CHECK_CLASS_REPEAT:
2503 #endif
2504
2505 switch (*ccode)
2506 {
2507 case OP_CRSTAR: /* These could be empty; continue */
2508 case OP_CRMINSTAR:
2509 case OP_CRQUERY:
2510 case OP_CRMINQUERY:
2511 case OP_CRPOSSTAR:
2512 case OP_CRPOSQUERY:
2513 break;
2514
2515 default: /* Non-repeat => class must match */
2516 case OP_CRPLUS: /* These repeats aren't empty */
2517 case OP_CRMINPLUS:
2518 case OP_CRPOSPLUS:
2519 return FALSE;
2520
2521 case OP_CRRANGE:
2522 case OP_CRMINRANGE:
2523 case OP_CRPOSRANGE:
2524 if (GET2(ccode, 1) > 0) return FALSE; /* Minimum > 0 */
2525 break;
2526 }
2527 break;
2528
2529 /* Opcodes that must match a character */
2530
2531 case OP_ANY:
2532 case OP_ALLANY:
2533 case OP_ANYBYTE:
2534
2535 case OP_PROP:
2536 case OP_NOTPROP:
2537 case OP_ANYNL:
2538
2539 case OP_NOT_HSPACE:
2540 case OP_HSPACE:
2541 case OP_NOT_VSPACE:
2542 case OP_VSPACE:
2543 case OP_EXTUNI:
2544
2545 case OP_NOT_DIGIT:
2546 case OP_DIGIT:
2547 case OP_NOT_WHITESPACE:
2548 case OP_WHITESPACE:
2549 case OP_NOT_WORDCHAR:
2550 case OP_WORDCHAR:
2551
2552 case OP_CHAR:
2553 case OP_CHARI:
2554 case OP_NOT:
2555 case OP_NOTI:
2556
2557 case OP_PLUS:
2558 case OP_PLUSI:
2559 case OP_MINPLUS:
2560 case OP_MINPLUSI:
2561
2562 case OP_NOTPLUS:
2563 case OP_NOTPLUSI:
2564 case OP_NOTMINPLUS:
2565 case OP_NOTMINPLUSI:
2566
2567 case OP_POSPLUS:
2568 case OP_POSPLUSI:
2569 case OP_NOTPOSPLUS:
2570 case OP_NOTPOSPLUSI:
2571
2572 case OP_EXACT:
2573 case OP_EXACTI:
2574 case OP_NOTEXACT:
2575 case OP_NOTEXACTI:
2576
2577 case OP_TYPEPLUS:
2578 case OP_TYPEMINPLUS:
2579 case OP_TYPEPOSPLUS:
2580 case OP_TYPEEXACT:
2581
2582 return FALSE;
2583
2584 /* These are going to continue, as they may be empty, but we have to
2585 fudge the length for the \p and \P cases. */
2586
2587 case OP_TYPESTAR:
2588 case OP_TYPEMINSTAR:
2589 case OP_TYPEPOSSTAR:
2590 case OP_TYPEQUERY:
2591 case OP_TYPEMINQUERY:
2592 case OP_TYPEPOSQUERY:
2593 if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
2594 break;
2595
2596 /* Same for these */
2597
2598 case OP_TYPEUPTO:
2599 case OP_TYPEMINUPTO:
2600 case OP_TYPEPOSUPTO:
2601 if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP)
2602 code += 2;
2603 break;
2604
2605 /* End of branch */
2606
2607 case OP_KET:
2608 case OP_KETRMAX:
2609 case OP_KETRMIN:
2610 case OP_KETRPOS:
2611 case OP_ALT:
2612 return TRUE;
2613
2614 /* In UTF-8 mode, STAR, MINSTAR, POSSTAR, QUERY, MINQUERY, POSQUERY, UPTO,
2615 MINUPTO, and POSUPTO and their caseless and negative versions may be
2616 followed by a multibyte character. */
2617
2618 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
2619 case OP_STAR:
2620 case OP_STARI:
2621 case OP_NOTSTAR:
2622 case OP_NOTSTARI:
2623
2624 case OP_MINSTAR:
2625 case OP_MINSTARI:
2626 case OP_NOTMINSTAR:
2627 case OP_NOTMINSTARI:
2628
2629 case OP_POSSTAR:
2630 case OP_POSSTARI:
2631 case OP_NOTPOSSTAR:
2632 case OP_NOTPOSSTARI:
2633
2634 case OP_QUERY:
2635 case OP_QUERYI:
2636 case OP_NOTQUERY:
2637 case OP_NOTQUERYI:
2638
2639 case OP_MINQUERY:
2640 case OP_MINQUERYI:
2641 case OP_NOTMINQUERY:
2642 case OP_NOTMINQUERYI:
2643
2644 case OP_POSQUERY:
2645 case OP_POSQUERYI:
2646 case OP_NOTPOSQUERY:
2647 case OP_NOTPOSQUERYI:
2648
2649 if (utf && HAS_EXTRALEN(code[1])) code += GET_EXTRALEN(code[1]);
2650 break;
2651
2652 case OP_UPTO:
2653 case OP_UPTOI:
2654 case OP_NOTUPTO:
2655 case OP_NOTUPTOI:
2656
2657 case OP_MINUPTO:
2658 case OP_MINUPTOI:
2659 case OP_NOTMINUPTO:
2660 case OP_NOTMINUPTOI:
2661
2662 case OP_POSUPTO:
2663 case OP_POSUPTOI:
2664 case OP_NOTPOSUPTO:
2665 case OP_NOTPOSUPTOI:
2666
2667 if (utf && HAS_EXTRALEN(code[1 + IMM2_SIZE])) code += GET_EXTRALEN(code[1 + IMM2_SIZE]);
2668 break;
2669 #endif
2670
2671 /* MARK, and PRUNE/SKIP/THEN with an argument must skip over the argument
2672 string. */
2673
2674 case OP_MARK:
2675 case OP_PRUNE_ARG:
2676 case OP_SKIP_ARG:
2677 case OP_THEN_ARG:
2678 code += code[1];
2679 break;
2680
2681 /* None of the remaining opcodes are required to match a character. */
2682
2683 default:
2684 break;
2685 }
2686 }
2687
2688 return TRUE;
2689 }
2690
2691
2692
2693 /*************************************************
2694 * Scan compiled regex for non-emptiness *
2695 *************************************************/
2696
2697 /* This function is called to check for left recursive calls. We want to check
2698 the current branch of the current pattern to see if it could match the empty
2699 string. If it could, we must look outwards for branches at other levels,
2700 stopping when we pass beyond the bracket which is the subject of the recursion.
2701 This function is called only during the real compile, not during the
2702 pre-compile.
2703
2704 Arguments:
2705 code points to start of the recursion
2706 endcode points to where to stop (current RECURSE item)
2707 bcptr points to the chain of current (unclosed) branch starts
2708 utf TRUE if in UTF-8 / UTF-16 / UTF-32 mode
2709 cd pointers to tables etc
2710
2711 Returns: TRUE if what is matched could be empty
2712 */
2713
2714 static BOOL
2715 could_be_empty(const pcre_uchar *code, const pcre_uchar *endcode,
2716 branch_chain *bcptr, BOOL utf, compile_data *cd)
2717 {
2718 while (bcptr != NULL && bcptr->current_branch >= code)
2719 {
2720 if (!could_be_empty_branch(bcptr->current_branch, endcode, utf, cd, NULL))
2721 return FALSE;
2722 bcptr = bcptr->outer;
2723 }
2724 return TRUE;
2725 }
2726
2727
2728
2729 /*************************************************
2730 * Base opcode of repeated opcodes *
2731 *************************************************/
2732
2733 /* Returns the base opcode for repeated single character type opcodes. If the
2734 opcode is not a repeated character type, it returns with the original value.
2735
2736 Arguments: c opcode
2737 Returns: base opcode for the type
2738 */
2739
2740 static pcre_uchar
2741 get_repeat_base(pcre_uchar c)
2742 {
2743 return (c > OP_TYPEPOSUPTO)? c :
2744 (c >= OP_TYPESTAR)? OP_TYPESTAR :
2745 (c >= OP_NOTSTARI)? OP_NOTSTARI :
2746 (c >= OP_NOTSTAR)? OP_NOTSTAR :
2747 (c >= OP_STARI)? OP_STARI :
2748 OP_STAR;
2749 }
2750
2751
2752
2753 #ifdef SUPPORT_UCP
2754 /*************************************************
2755 * Check a character and a property *
2756 *************************************************/
2757
2758 /* This function is called by check_auto_possessive() when a property item
2759 is adjacent to a fixed character.
2760
2761 Arguments:
2762 c the character
2763 ptype the property type
2764 pdata the data for the type
2765 negated TRUE if it's a negated property (\P or \p{^)
2766
2767 Returns: TRUE if auto-possessifying is OK
2768 */
2769
2770 static BOOL
2771 check_char_prop(pcre_uint32 c, unsigned int ptype, unsigned int pdata,
2772 BOOL negated)
2773 {
2774 const pcre_uint32 *p;
2775 const ucd_record *prop = GET_UCD(c);
2776
2777 switch(ptype)
2778 {
2779 case PT_LAMP:
2780 return (prop->chartype == ucp_Lu ||
2781 prop->chartype == ucp_Ll ||
2782 prop->chartype == ucp_Lt) == negated;
2783
2784 case PT_GC:
2785 return (pdata == PRIV(ucp_gentype)[prop->chartype]) == negated;
2786
2787 case PT_PC:
2788 return (pdata == prop->chartype) == negated;
2789
2790 case PT_SC:
2791 return (pdata == prop->script) == negated;
2792
2793 /* These are specials */
2794
2795 case PT_ALNUM:
2796 return (PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
2797 PRIV(ucp_gentype)[prop->chartype] == ucp_N) == negated;
2798
2799 /* Perl space used to exclude VT, but from Perl 5.18 it is included, which
2800 means that Perl space and POSIX space are now identical. PCRE was changed
2801 at release 8.34. */
2802
2803 case PT_SPACE: /* Perl space */
2804 case PT_PXSPACE: /* POSIX space */
2805 switch(c)
2806 {
2807 HSPACE_CASES:
2808 VSPACE_CASES:
2809 return negated;
2810
2811 default:
2812 return (PRIV(ucp_gentype)[prop->chartype] == ucp_Z) == negated;
2813 }
2814 break; /* Control never reaches here */
2815
2816 case PT_WORD:
2817 return (PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
2818 PRIV(ucp_gentype)[prop->chartype] == ucp_N ||
2819 c == CHAR_UNDERSCORE) == negated;
2820
2821 case PT_CLIST:
2822 p = PRIV(ucd_caseless_sets) + prop->caseset;
2823 for (;;)
2824 {
2825 if (c < *p) return !negated;
2826 if (c == *p++) return negated;
2827 }
2828 break; /* Control never reaches here */
2829 }
2830
2831 return FALSE;
2832 }
2833 #endif /* SUPPORT_UCP */
2834
2835
2836
2837 /*************************************************
2838 * Fill the character property list *
2839 *************************************************/
2840
2841 /* Checks whether the code points to an opcode that can take part in auto-
2842 possessification, and if so, fills a list with its properties.
2843
2844 Arguments:
2845 code points to start of expression
2846 utf TRUE if in UTF-8 / UTF-16 / UTF-32 mode
2847 fcc points to case-flipping table
2848 list points to output list
2849 list[0] will be filled with the opcode
2850 list[1] will be non-zero if this opcode
2851 can match an empty character string
2852 list[2..7] depends on the opcode
2853
2854 Returns: points to the start of the next opcode if *code is accepted
2855 NULL if *code is not accepted
2856 */
2857
2858 static const pcre_uchar *
2859 get_chr_property_list(const pcre_uchar *code, BOOL utf,
2860 const pcre_uint8 *fcc, pcre_uint32 *list)
2861 {
2862 pcre_uchar c = *code;
2863 pcre_uchar base;
2864 const pcre_uchar *end;
2865 pcre_uint32 chr;
2866
2867 #ifdef SUPPORT_UCP
2868 pcre_uint32 *clist_dest;
2869 const pcre_uint32 *clist_src;
2870 #else
2871 utf = utf; /* Suppress "unused parameter" compiler warning */
2872 #endif
2873
2874 list[0] = c;
2875 list[1] = FALSE;
2876 code++;
2877
2878 if (c >= OP_STAR && c <= OP_TYPEPOSUPTO)
2879 {
2880 base = get_repeat_base(c);
2881 c -= (base - OP_STAR);
2882
2883 if (c == OP_UPTO || c == OP_MINUPTO || c == OP_EXACT || c == OP_POSUPTO)
2884 code += IMM2_SIZE;
2885
2886 list[1] = (c != OP_PLUS && c != OP_MINPLUS && c != OP_EXACT && c != OP_POSPLUS);
2887
2888 switch(base)
2889 {
2890 case OP_STAR:
2891 list[0] = OP_CHAR;
2892 break;
2893
2894 case OP_STARI:
2895 list[0] = OP_CHARI;
2896 break;
2897
2898 case OP_NOTSTAR:
2899 list[0] = OP_NOT;
2900 break;
2901
2902 case OP_NOTSTARI:
2903 list[0] = OP_NOTI;
2904 break;
2905
2906 case OP_TYPESTAR:
2907 list[0] = *code;
2908 code++;
2909 break;
2910 }
2911 c = list[0];
2912 }
2913
2914 switch(c)
2915 {
2916 case OP_NOT_DIGIT:
2917 case OP_DIGIT:
2918 case OP_NOT_WHITESPACE:
2919 case OP_WHITESPACE:
2920 case OP_NOT_WORDCHAR:
2921 case OP_WORDCHAR:
2922 case OP_ANY:
2923 case OP_ALLANY:
2924 case OP_ANYNL:
2925 case OP_NOT_HSPACE:
2926 case OP_HSPACE:
2927 case OP_NOT_VSPACE:
2928 case OP_VSPACE:
2929 case OP_EXTUNI:
2930 case OP_EODN:
2931 case OP_EOD:
2932 case OP_DOLL:
2933 case OP_DOLLM:
2934 return code;
2935
2936 case OP_CHAR:
2937 case OP_NOT:
2938 GETCHARINCTEST(chr, code);
2939 list[2] = chr;
2940 list[3] = NOTACHAR;
2941 return code;
2942
2943 case OP_CHARI:
2944 case OP_NOTI:
2945 list[0] = (c == OP_CHARI) ? OP_CHAR : OP_NOT;
2946 GETCHARINCTEST(chr, code);
2947 list[2] = chr;
2948
2949 #ifdef SUPPORT_UCP
2950 if (chr < 128 || (chr < 256 && !utf))
2951 list[3] = fcc[chr];
2952 else
2953 list[3] = UCD_OTHERCASE(chr);
2954 #elif defined SUPPORT_UTF || !defined COMPILE_PCRE8
2955 list[3] = (chr < 256) ? fcc[chr] : chr;
2956 #else
2957 list[3] = fcc[chr];
2958 #endif
2959
2960 /* The othercase might be the same value. */
2961
2962 if (chr == list[3])
2963 list[3] = NOTACHAR;
2964 else
2965 list[4] = NOTACHAR;
2966 return code;
2967
2968 #ifdef SUPPORT_UCP
2969 case OP_PROP:
2970 case OP_NOTPROP:
2971 if (code[0] != PT_CLIST)
2972 {
2973 list[2] = code[0];
2974 list[3] = code[1];
2975 return code + 2;
2976 }
2977
2978 /* Convert only if we have enough space. */
2979
2980 clist_src = PRIV(ucd_caseless_sets) + code[1];
2981 clist_dest = list + 2;
2982 code += 2;
2983
2984 do {
2985 if (clist_dest >= list + 8)
2986 {
2987 /* Early return if there is not enough space. This should never
2988 happen, since all clists are shorter than 5 character now. */
2989 list[2] = code[0];
2990 list[3] = code[1];
2991 return code;
2992 }
2993 *clist_dest++ = *clist_src;
2994 }
2995 while(*clist_src++ != NOTACHAR);
2996
2997 /* All characters are stored. The terminating NOTACHAR
2998 is copied form the clist itself. */
2999
3000 list[0] = (c == OP_PROP) ? OP_CHAR : OP_NOT;
3001 return code;
3002 #endif
3003
3004 case OP_NCLASS:
3005 case OP_CLASS:
3006 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
3007 case OP_XCLASS:
3008 if (c == OP_XCLASS)
3009 end = code + GET(code, 0) - 1;
3010 else
3011 #endif
3012 end = code + 32 / sizeof(pcre_uchar);
3013
3014 switch(*end)
3015 {
3016 case OP_CRSTAR:
3017 case OP_CRMINSTAR:
3018 case OP_CRQUERY:
3019 case OP_CRMINQUERY:
3020 case OP_CRPOSSTAR:
3021 case OP_CRPOSQUERY:
3022 list[1] = TRUE;
3023 end++;
3024 break;
3025
3026 case OP_CRPLUS:
3027 case OP_CRMINPLUS:
3028 case OP_CRPOSPLUS:
3029 end++;
3030 break;
3031
3032 case OP_CRRANGE:
3033 case OP_CRMINRANGE:
3034 case OP_CRPOSRANGE:
3035 list[1] = (GET2(end, 1) == 0);
3036 end += 1 + 2 * IMM2_SIZE;
3037 break;
3038 }
3039 list[2] = end - code;
3040 return end;
3041 }
3042 return NULL; /* Opcode not accepted */
3043 }
3044
3045
3046
3047 /*************************************************
3048 * Scan further character sets for match *
3049 *************************************************/
3050
3051 /* Checks whether the base and the current opcode have a common character, in
3052 which case the base cannot be possessified.
3053
3054 Arguments:
3055 code points to the byte code
3056 utf TRUE in UTF-8 / UTF-16 / UTF-32 mode
3057 cd static compile data
3058 base_list the data list of the base opcode
3059
3060 Returns: TRUE if the auto-possessification is possible
3061 */
3062
3063 static BOOL
3064 compare_opcodes(const pcre_uchar *code, BOOL utf, const compile_data *cd,
3065 const pcre_uint32 *base_list, const pcre_uchar *base_end)
3066 {
3067 pcre_uchar c;
3068 pcre_uint32 list[8];
3069 const pcre_uint32 *chr_ptr;
3070 const pcre_uint32 *ochr_ptr;
3071 const pcre_uint32 *list_ptr;
3072 const pcre_uchar *next_code;
3073 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
3074 const pcre_uchar *xclass_flags;
3075 #endif
3076 const pcre_uint8 *class_bitset;
3077 const pcre_uint8 *set1, *set2, *set_end;
3078 pcre_uint32 chr;
3079 BOOL accepted, invert_bits;
3080
3081 /* Note: the base_list[1] contains whether the current opcode has greedy
3082 (represented by a non-zero value) quantifier. This is a different from
3083 other character type lists, which stores here that the character iterator
3084 matches to an empty string (also represented by a non-zero value). */
3085
3086 for(;;)
3087 {
3088 /* All operations move the code pointer forward.
3089 Therefore infinite recursions are not possible. */
3090
3091 c = *code;
3092
3093 /* Skip over callouts */
3094
3095 if (c == OP_CALLOUT)
3096 {
3097 code += PRIV(OP_lengths)[c];
3098 continue;
3099 }
3100
3101 if (c == OP_ALT)
3102 {
3103 do code += GET(code, 1); while (*code == OP_ALT);
3104 c = *code;
3105 }
3106
3107 switch(c)
3108 {
3109 case OP_END:
3110 case OP_KETRPOS:
3111 /* TRUE only in greedy case. The non-greedy case could be replaced by
3112 an OP_EXACT, but it is probably not worth it. (And note that OP_EXACT
3113 uses more memory, which we cannot get at this stage.) */
3114
3115 return base_list[1] != 0;
3116
3117 case OP_KET:
3118 /* If the bracket is capturing, and referenced by an OP_RECURSE, or
3119 it is an atomic sub-pattern (assert, once, etc.) the non-greedy case
3120 cannot be converted to a possessive form. */
3121
3122 if (base_list[1] == 0) return FALSE;
3123
3124 switch(*(code - GET(code, 1)))
3125 {
3126 case OP_ASSERT:
3127 case OP_ASSERT_NOT:
3128 case OP_ASSERTBACK:
3129 case OP_ASSERTBACK_NOT:
3130 case OP_ONCE:
3131 case OP_ONCE_NC:
3132 /* Atomic sub-patterns and assertions can always auto-possessify their
3133 last iterator. */
3134 return TRUE;
3135 }
3136
3137 code += PRIV(OP_lengths)[c];
3138 continue;
3139
3140 case OP_ONCE:
3141 case OP_ONCE_NC:
3142 case OP_BRA:
3143 case OP_CBRA:
3144 next_code = code + GET(code, 1);
3145 code += PRIV(OP_lengths)[c];
3146
3147 while (*next_code == OP_ALT)
3148 {
3149 if (!compare_opcodes(code, utf, cd, base_list, base_end)) return FALSE;
3150 code = next_code + 1 + LINK_SIZE;
3151 next_code += GET(next_code, 1);
3152 }
3153 continue;
3154
3155 case OP_BRAZERO:
3156 case OP_BRAMINZERO:
3157
3158 next_code = code + 1;
3159 if (*next_code != OP_BRA && *next_code != OP_CBRA
3160 && *next_code != OP_ONCE && *next_code != OP_ONCE_NC) return FALSE;
3161
3162 do next_code += GET(next_code, 1); while (*next_code == OP_ALT);
3163
3164 /* The bracket content will be checked by the
3165 OP_BRA/OP_CBRA case above. */
3166 next_code += 1 + LINK_SIZE;
3167 if (!compare_opcodes(next_code, utf, cd, base_list, base_end))
3168 return FALSE;
3169
3170 code += PRIV(OP_lengths)[c];
3171 continue;
3172 }
3173
3174 /* Check for a supported opcode, and load its properties. */
3175
3176 code = get_chr_property_list(code, utf, cd->fcc, list);
3177 if (code == NULL) return FALSE; /* Unsupported */
3178
3179 /* If either opcode is a small character list, set pointers for comparing
3180 characters from that list with another list, or with a property. */
3181
3182 if (base_list[0] == OP_CHAR)
3183 {
3184 chr_ptr = base_list + 2;
3185 list_ptr = list;
3186 }
3187 else if (list[0] == OP_CHAR)
3188 {
3189 chr_ptr = list + 2;
3190 list_ptr = base_list;
3191 }
3192
3193 /* Character bitsets can also be compared to certain opcodes. */
3194
3195 else if (base_list[0] == OP_CLASS || list[0] == OP_CLASS
3196 #ifdef COMPILE_PCRE8
3197 /* In 8 bit, non-UTF mode, OP_CLASS and OP_NCLASS are the same. */
3198 || (!utf && (base_list[0] == OP_NCLASS || list[0] == OP_NCLASS))
3199 #endif
3200 )
3201 {
3202 #ifdef COMPILE_PCRE8
3203 if (base_list[0] == OP_CLASS || (!utf && base_list[0] == OP_NCLASS))
3204 #else
3205 if (base_list[0] == OP_CLASS)
3206 #endif
3207 {
3208 set1 = (pcre_uint8 *)(base_end - base_list[2]);
3209 list_ptr = list;
3210 }
3211 else
3212 {
3213 set1 = (pcre_uint8 *)(code - list[2]);
3214 list_ptr = base_list;
3215 }
3216
3217 invert_bits = FALSE;
3218 switch(list_ptr[0])
3219 {
3220 case OP_CLASS:
3221 case OP_NCLASS:
3222 set2 = (pcre_uint8 *)
3223 ((list_ptr == list ? code : base_end) - list_ptr[2]);
3224 break;
3225
3226 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
3227 case OP_XCLASS:
3228 xclass_flags = (list_ptr == list ? code : base_end) - list_ptr[2] + LINK_SIZE;
3229 if ((*xclass_flags & XCL_HASPROP) != 0) return FALSE;
3230 if ((*xclass_flags & XCL_MAP) == 0)
3231 {
3232 /* No bits are set for characters < 256. */
3233 if (list[1] == 0) return TRUE;
3234 /* Might be an empty repeat. */
3235 continue;
3236 }
3237 set2 = (pcre_uint8 *)(xclass_flags + 1);
3238 break;
3239 #endif
3240
3241 case OP_NOT_DIGIT:
3242 invert_bits = TRUE;
3243 /* Fall through */
3244 case OP_DIGIT:
3245 set2 = (pcre_uint8 *)(cd->cbits + cbit_digit);
3246 break;
3247
3248 case OP_NOT_WHITESPACE:
3249 invert_bits = TRUE;
3250 /* Fall through */
3251 case OP_WHITESPACE:
3252 set2 = (pcre_uint8 *)(cd->cbits + cbit_space);
3253 break;
3254
3255 case OP_NOT_WORDCHAR:
3256 invert_bits = TRUE;
3257 /* Fall through */
3258 case OP_WORDCHAR:
3259 set2 = (pcre_uint8 *)(cd->cbits + cbit_word);
3260 break;
3261
3262 default:
3263 return FALSE;
3264 }
3265
3266 /* Because the sets are unaligned, we need
3267 to perform byte comparison here. */
3268 set_end = set1 + 32;
3269 if (invert_bits)
3270 {
3271 do
3272 {
3273 if ((*set1++ & ~(*set2++)) != 0) return FALSE;
3274 }
3275 while (set1 < set_end);
3276 }
3277 else
3278 {
3279 do
3280 {
3281 if ((*set1++ & *set2++) != 0) return FALSE;
3282 }
3283 while (set1 < set_end);
3284 }
3285
3286 if (list[1] == 0) return TRUE;
3287 /* Might be an empty repeat. */
3288 continue;
3289 }
3290
3291 /* Some property combinations also acceptable. Unicode property opcodes are
3292 processed specially; the rest can be handled with a lookup table. */
3293
3294 else
3295 {
3296 pcre_uint32 leftop, rightop;
3297
3298 leftop = base_list[0];
3299 rightop = list[0];
3300
3301 #ifdef SUPPORT_UCP
3302 accepted = FALSE; /* Always set in non-unicode case. */
3303 if (leftop == OP_PROP || leftop == OP_NOTPROP)
3304 {
3305 if (rightop == OP_EOD)
3306 accepted = TRUE;
3307 else if (rightop == OP_PROP || rightop == OP_NOTPROP)
3308 {
3309 int n;
3310 const pcre_uint8 *p;
3311 BOOL same = leftop == rightop;
3312 BOOL lisprop = leftop == OP_PROP;
3313 BOOL risprop = rightop == OP_PROP;
3314 BOOL bothprop = lisprop && risprop;
3315
3316 /* There's a table that specifies how each combination is to be
3317 processed:
3318 0 Always return FALSE (never auto-possessify)
3319 1 Character groups are distinct (possessify if both are OP_PROP)
3320 2 Check character categories in the same group (general or particular)
3321 3 Return TRUE if the two opcodes are not the same
3322 ... see comments below
3323 */
3324
3325 n = propposstab[base_list[2]][list[2]];
3326 switch(n)
3327 {
3328 case 0: break;
3329 case 1: accepted = bothprop; break;
3330 case 2: accepted = (base_list[3] == list[3]) != same; break;
3331 case 3: accepted = !same; break;
3332
3333 case 4: /* Left general category, right particular category */
3334 accepted = risprop && catposstab[base_list[3]][list[3]] == same;
3335 break;
3336
3337 case 5: /* Right general category, left particular category */
3338 accepted = lisprop && catposstab[list[3]][base_list[3]] == same;
3339 break;
3340
3341 /* This code is logically tricky. Think hard before fiddling with it.
3342 The posspropstab table has four entries per row. Each row relates to
3343 one of PCRE's special properties such as ALNUM or SPACE or WORD.
3344 Only WORD actually needs all four entries, but using repeats for the
3345 others means they can all use the same code below.
3346
3347 The first two entries in each row are Unicode general categories, and
3348 apply always, because all the characters they include are part of the
3349 PCRE character set. The third and fourth entries are a general and a
3350 particular category, respectively, that include one or more relevant
3351 characters. One or the other is used, depending on whether the check
3352 is for a general or a particular category. However, in both cases the
3353 category contains more characters than the specials that are defined
3354 for the property being tested against. Therefore, it cannot be used
3355 in a NOTPROP case.
3356
3357 Example: the row for WORD contains ucp_L, ucp_N, ucp_P, ucp_Po.
3358 Underscore is covered by ucp_P or ucp_Po. */
3359
3360 case 6: /* Left alphanum vs right general category */
3361 case 7: /* Left space vs right general category */
3362 case 8: /* Left word vs right general category */
3363 p = posspropstab[n-6];
3364 accepted = risprop && lisprop ==
3365 (list[3] != p[0] &&
3366 list[3] != p[1] &&
3367 (list[3] != p[2] || !lisprop));
3368 break;
3369
3370 case 9: /* Right alphanum vs left general category */
3371 case 10: /* Right space vs left general category */
3372 case 11: /* Right word vs left general category */
3373 p = posspropstab[n-9];
3374 accepted = lisprop && risprop ==
3375 (base_list[3] != p[0] &&
3376 base_list[3] != p[1] &&
3377 (base_list[3] != p[2] || !risprop));
3378 break;
3379
3380 case 12: /* Left alphanum vs right particular category */
3381 case 13: /* Left space vs right particular category */
3382 case 14: /* Left word vs right particular category */
3383 p = posspropstab[n-12];
3384 accepted = risprop && lisprop ==
3385 (catposstab[p[0]][list[3]] &&
3386 catposstab[p[1]][list[3]] &&
3387 (list[3] != p[3] || !lisprop));
3388 break;
3389
3390 case 15: /* Right alphanum vs left particular category */
3391 case 16: /* Right space vs left particular category */
3392 case 17: /* Right word vs left particular category */
3393 p = posspropstab[n-15];
3394 accepted = lisprop && risprop ==
3395 (catposstab[p[0]][base_list[3]] &&
3396 catposstab[p[1]][base_list[3]] &&
3397 (base_list[3] != p[3] || !risprop));
3398 break;
3399 }
3400 }
3401 }
3402
3403 else
3404 #endif /* SUPPORT_UCP */
3405
3406 accepted = leftop >= FIRST_AUTOTAB_OP && leftop <= LAST_AUTOTAB_LEFT_OP &&
3407 rightop >= FIRST_AUTOTAB_OP && rightop <= LAST_AUTOTAB_RIGHT_OP &&
3408 autoposstab[leftop - FIRST_AUTOTAB_OP][rightop - FIRST_AUTOTAB_OP];
3409
3410 if (!accepted)
3411 return FALSE;
3412
3413 if (list[1] == 0) return TRUE;
3414 /* Might be an empty repeat. */
3415 continue;
3416 }
3417
3418 /* Control reaches here only if one of the items is a small character list.
3419 All characters are checked against the other side. */
3420
3421 do
3422 {
3423 chr = *chr_ptr;
3424
3425 switch(list_ptr[0])
3426 {
3427 case OP_CHAR:
3428 ochr_ptr = list_ptr + 2;
3429 do
3430 {
3431 if (chr == *ochr_ptr) return FALSE;
3432 ochr_ptr++;
3433 }
3434 while(*ochr_ptr != NOTACHAR);
3435 break;
3436
3437 case OP_NOT:
3438 ochr_ptr = list_ptr + 2;
3439 do
3440 {
3441 if (chr == *ochr_ptr)
3442 break;
3443 ochr_ptr++;
3444 }
3445 while(*ochr_ptr != NOTACHAR);
3446 if (*ochr_ptr == NOTACHAR) return FALSE; /* Not found */
3447 break;
3448
3449 /* Note that OP_DIGIT etc. are generated only when PCRE_UCP is *not*
3450 set. When it is set, \d etc. are converted into OP_(NOT_)PROP codes. */
3451
3452 case OP_DIGIT:
3453 if (chr < 256 && (cd->ctypes[chr] & ctype_digit) != 0) return FALSE;
3454 break;
3455
3456 case OP_NOT_DIGIT:
3457 if (chr > 255 || (cd->ctypes[chr] & ctype_digit) == 0) return FALSE;
3458 break;
3459
3460 case OP_WHITESPACE:
3461 if (chr < 256 && (cd->ctypes[chr] & ctype_space) != 0) return FALSE;
3462 break;
3463
3464 case OP_NOT_WHITESPACE:
3465 if (chr > 255 || (cd->ctypes[chr] & ctype_space) == 0) return FALSE;
3466 break;
3467
3468 case OP_WORDCHAR:
3469 if (chr < 255 && (cd->ctypes[chr] & ctype_word) != 0) return FALSE;
3470 break;
3471
3472 case OP_NOT_WORDCHAR:
3473 if (chr > 255 || (cd->ctypes[chr] & ctype_word) == 0) return FALSE;
3474 break;
3475
3476 case OP_HSPACE:
3477 switch(chr)
3478 {
3479 HSPACE_CASES: return FALSE;
3480 default: break;
3481 }
3482 break;
3483
3484 case OP_NOT_HSPACE:
3485 switch(chr)
3486 {
3487 HSPACE_CASES: break;
3488 default: return FALSE;
3489 }
3490 break;
3491
3492 case OP_ANYNL:
3493 case OP_VSPACE:
3494 switch(chr)
3495 {
3496 VSPACE_CASES: return FALSE;
3497 default: break;
3498 }
3499 break;
3500
3501 case OP_NOT_VSPACE:
3502 switch(chr)
3503 {
3504 VSPACE_CASES: break;
3505 default: return FALSE;
3506 }
3507 break;
3508
3509 case OP_DOLL:
3510 case OP_EODN:
3511 switch (chr)
3512 {
3513 case CHAR_CR:
3514 case CHAR_LF:
3515 case CHAR_VT:
3516 case CHAR_FF:
3517 case CHAR_NEL:
3518 #ifndef EBCDIC
3519 case 0x2028:
3520 case 0x2029:
3521 #endif /* Not EBCDIC */
3522 return FALSE;
3523 }
3524 break;
3525
3526 case OP_EOD: /* Can always possessify before \z */
3527 break;
3528
3529 #ifdef SUPPORT_UCP
3530 case OP_PROP:
3531 case OP_NOTPROP:
3532 if (!check_char_prop(chr, list_ptr[2], list_ptr[3],
3533 list_ptr[0] == OP_NOTPROP))
3534 return FALSE;
3535 break;
3536 #endif
3537
3538 case OP_NCLASS:
3539 if (chr > 255) return FALSE;
3540 /* Fall through */
3541
3542 case OP_CLASS:
3543 if (chr > 255) break;
3544 class_bitset = (pcre_uint8 *)
3545 ((list_ptr == list ? code : base_end) - list_ptr[2]);
3546 if ((class_bitset[chr >> 3] & (1 << (chr & 7))) != 0) return FALSE;
3547 break;
3548
3549 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
3550 case OP_XCLASS:
3551 if (PRIV(xclass)(chr, (list_ptr == list ? code : base_end) -
3552 list_ptr[2] + LINK_SIZE, utf)) return FALSE;
3553 break;
3554 #endif
3555
3556 default:
3557 return FALSE;
3558 }
3559
3560 chr_ptr++;
3561 }
3562 while(*chr_ptr != NOTACHAR);
3563
3564 /* At least one character must be matched from this opcode. */
3565
3566 if (list[1] == 0) return TRUE;
3567 }
3568
3569 return FALSE;
3570 }
3571
3572
3573
3574 /*************************************************
3575 * Scan compiled regex for auto-possession *
3576 *************************************************/
3577
3578 /* Replaces single character iterations with their possessive alternatives
3579 if appropriate. This function modifies the compiled opcode!
3580
3581 Arguments:
3582 code points to start of the byte code
3583 utf TRUE in UTF-8 / UTF-16 / UTF-32 mode
3584 cd static compile data
3585
3586 Returns: nothing
3587 */
3588
3589 static void
3590 auto_possessify(pcre_uchar *code, BOOL utf, const compile_data *cd)
3591 {
3592 register pcre_uchar c;
3593 const pcre_uchar *end;
3594 pcre_uchar *repeat_opcode;
3595 pcre_uint32 list[8];
3596
3597 for (;;)
3598 {
3599 c = *code;
3600
3601 if (c >= OP_STAR && c <= OP_TYPEPOSUPTO)
3602 {
3603 c -= get_repeat_base(c) - OP_STAR;
3604 end = (c <= OP_MINUPTO) ?
3605 get_chr_property_list(code, utf, cd->fcc, list) : NULL;
3606 list[1] = c == OP_STAR || c == OP_PLUS || c == OP_QUERY || c == OP_UPTO;
3607
3608 if (end != NULL && compare_opcodes(end, utf, cd, list, end))
3609 {
3610 switch(c)
3611 {
3612 case OP_STAR:
3613 *code += OP_POSSTAR - OP_STAR;
3614 break;
3615
3616 case OP_MINSTAR:
3617 *code += OP_POSSTAR - OP_MINSTAR;
3618 break;
3619
3620 case OP_PLUS:
3621 *code += OP_POSPLUS - OP_PLUS;
3622 break;
3623
3624 case OP_MINPLUS:
3625 *code += OP_POSPLUS - OP_MINPLUS;
3626 break;
3627
3628 case OP_QUERY:
3629 *code += OP_POSQUERY - OP_QUERY;
3630 break;
3631
3632 case OP_MINQUERY:
3633 *code += OP_POSQUERY - OP_MINQUERY;
3634 break;
3635
3636 case OP_UPTO:
3637 *code += OP_POSUPTO - OP_UPTO;
3638 break;
3639
3640 case OP_MINUPTO:
3641 *code += OP_MINUPTO - OP_UPTO;
3642 break;
3643 }
3644 }
3645 c = *code;
3646 }
3647 else if (c == OP_CLASS || c == OP_NCLASS || c == OP_XCLASS)
3648 {
3649 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
3650 if (c == OP_XCLASS)
3651 repeat_opcode = code + GET(code, 1);
3652 else
3653 #endif
3654 repeat_opcode = code + 1 + (32 / sizeof(pcre_uchar));
3655
3656 c = *repeat_opcode;
3657 if (c >= OP_CRSTAR && c <= OP_CRMINRANGE)
3658 {
3659 /* end must not be NULL. */
3660 end = get_chr_property_list(code, utf, cd->fcc, list);
3661
3662 list[1] = (c & 1) == 0;
3663
3664 if (compare_opcodes(end, utf, cd, list, end))
3665 {
3666 switch (c)
3667 {
3668 case OP_CRSTAR:
3669 case OP_CRMINSTAR:
3670 *repeat_opcode = OP_CRPOSSTAR;
3671 break;
3672
3673 case OP_CRPLUS:
3674 case OP_CRMINPLUS:
3675 *repeat_opcode = OP_CRPOSPLUS;
3676 break;
3677
3678 case OP_CRQUERY:
3679 case OP_CRMINQUERY:
3680 *repeat_opcode = OP_CRPOSQUERY;
3681 break;
3682
3683 case OP_CRRANGE:
3684 case OP_CRMINRANGE:
3685 *repeat_opcode = OP_CRPOSRANGE;
3686 break;
3687 }
3688 }
3689 }
3690 c = *code;
3691 }
3692
3693 switch(c)
3694 {
3695 case OP_END:
3696 return;
3697
3698 case OP_TYPESTAR:
3699 case OP_TYPEMINSTAR:
3700 case OP_TYPEPLUS:
3701 case OP_TYPEMINPLUS:
3702 case OP_TYPEQUERY:
3703 case OP_TYPEMINQUERY:
3704 case OP_TYPEPOSSTAR:
3705 case OP_TYPEPOSPLUS:
3706 case OP_TYPEPOSQUERY:
3707 if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
3708 break;
3709
3710 case OP_TYPEUPTO:
3711 case OP_TYPEMINUPTO:
3712 case OP_TYPEEXACT:
3713 case OP_TYPEPOSUPTO:
3714 if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP)
3715 code += 2;
3716 break;
3717
3718 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
3719 case OP_XCLASS:
3720 code += GET(code, 1);
3721 break;
3722 #endif
3723
3724 case OP_MARK:
3725 case OP_PRUNE_ARG:
3726 case OP_SKIP_ARG:
3727 case OP_THEN_ARG:
3728 code += code[1];
3729 break;
3730 }
3731
3732 /* Add in the fixed length from the table */
3733
3734 code += PRIV(OP_lengths)[c];
3735
3736 /* In UTF-8 mode, opcodes that are followed by a character may be followed by
3737 a multi-byte character. The length in the table is a minimum, so we have to
3738 arrange to skip the extra bytes. */
3739
3740 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
3741 if (utf) switch(c)
3742 {
3743 case OP_CHAR:
3744 case OP_CHARI:
3745 case OP_NOT:
3746 case OP_NOTI:
3747 case OP_STAR:
3748 case OP_MINSTAR:
3749 case OP_PLUS:
3750 case OP_MINPLUS:
3751 case OP_QUERY:
3752 case OP_MINQUERY:
3753 case OP_UPTO:
3754 case OP_MINUPTO:
3755 case OP_EXACT:
3756 case OP_POSSTAR:
3757 case OP_POSPLUS:
3758 case OP_POSQUERY:
3759 case OP_POSUPTO:
3760 case OP_STARI:
3761 case OP_MINSTARI:
3762 case OP_PLUSI:
3763 case OP_MINPLUSI:
3764 case OP_QUERYI:
3765 case OP_MINQUERYI:
3766 case OP_UPTOI:
3767 case OP_MINUPTOI:
3768 case OP_EXACTI:
3769 case OP_POSSTARI:
3770 case OP_POSPLUSI:
3771 case OP_POSQUERYI:
3772 case OP_POSUPTOI:
3773 case OP_NOTSTAR:
3774 case OP_NOTMINSTAR:
3775 case OP_NOTPLUS:
3776 case OP_NOTMINPLUS:
3777 case OP_NOTQUERY:
3778 case OP_NOTMINQUERY:
3779 case OP_NOTUPTO:
3780 case OP_NOTMINUPTO:
3781 case OP_NOTEXACT:
3782 case OP_NOTPOSSTAR:
3783 case OP_NOTPOSPLUS:
3784 case OP_NOTPOSQUERY:
3785 case OP_NOTPOSUPTO:
3786 case OP_NOTSTARI:
3787 case OP_NOTMINSTARI:
3788 case OP_NOTPLUSI:
3789 case OP_NOTMINPLUSI:
3790 case OP_NOTQUERYI:
3791 case OP_NOTMINQUERYI:
3792 case OP_NOTUPTOI:
3793 case OP_NOTMINUPTOI:
3794 case OP_NOTEXACTI:
3795 case OP_NOTPOSSTARI:
3796 case OP_NOTPOSPLUSI:
3797 case OP_NOTPOSQUERYI:
3798 case OP_NOTPOSUPTOI:
3799 if (HAS_EXTRALEN(code[-1])) code += GET_EXTRALEN(code[-1]);
3800 break;
3801 }
3802 #else
3803 (void)(utf); /* Keep compiler happy by referencing function argument */
3804 #endif
3805 }
3806 }
3807
3808
3809
3810 /*************************************************
3811 * Check for POSIX class syntax *
3812 *************************************************/
3813
3814 /* This function is called when the sequence "[:" or "[." or "[=" is
3815 encountered in a character class. It checks whether this is followed by a
3816 sequence of characters terminated by a matching ":]" or ".]" or "=]". If we
3817 reach an unescaped ']' without the special preceding character, return FALSE.
3818
3819 Originally, this function only recognized a sequence of letters between the
3820 terminators, but it seems that Perl recognizes any sequence of characters,
3821 though of course unknown POSIX names are subsequently rejected. Perl gives an
3822 "Unknown POSIX class" error for [:f\oo:] for example, where previously PCRE
3823 didn't consider this to be a POSIX class. Likewise for [:1234:].
3824
3825 The problem in trying to be exactly like Perl is in the handling of escapes. We
3826 have to be sure that [abc[:x\]pqr] is *not* treated as containing a POSIX
3827 class, but [abc[:x\]pqr:]] is (so that an error can be generated). The code
3828 below handles the special case of \], but does not try to do any other escape
3829 processing. This makes it different from Perl for cases such as [:l\ower:]
3830 where Perl recognizes it as the POSIX class "lower" but PCRE does not recognize
3831 "l\ower". This is a lesser evil than not diagnosing bad classes when Perl does,
3832 I think.
3833
3834 A user pointed out that PCRE was rejecting [:a[:digit:]] whereas Perl was not.
3835 It seems that the appearance of a nested POSIX class supersedes an apparent
3836 external class. For example, [:a[:digit:]b:] matches "a", "b", ":", or
3837 a digit.
3838
3839 In Perl, unescaped square brackets may also appear as part of class names. For
3840 example, [:a[:abc]b:] gives unknown POSIX class "[:abc]b:]". However, for
3841 [:a[:abc]b][b:] it gives unknown POSIX class "[:abc]b][b:]", which does not
3842 seem right at all. PCRE does not allow closing square brackets in POSIX class
3843 names.
3844
3845 Arguments:
3846 ptr pointer to the initial [
3847 endptr where to return the end pointer
3848
3849 Returns: TRUE or FALSE
3850 */
3851
3852 static BOOL
3853 check_posix_syntax(const pcre_uchar *ptr, const pcre_uchar **endptr)
3854 {
3855 pcre_uchar terminator; /* Don't combine these lines; the Solaris cc */
3856 terminator = *(++ptr); /* compiler warns about "non-constant" initializer. */
3857 for (++ptr; *ptr != CHAR_NULL; ptr++)
3858 {
3859 if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
3860 ptr++;
3861 else if (*ptr == CHAR_RIGHT_SQUARE_BRACKET) return FALSE;
3862 else
3863 {
3864 if (*ptr == terminator && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
3865 {
3866 *endptr = ptr;
3867 return TRUE;
3868 }
3869 if (*ptr == CHAR_LEFT_SQUARE_BRACKET &&
3870 (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
3871 ptr[1] == CHAR_EQUALS_SIGN) &&
3872 check_posix_syntax(ptr, endptr))
3873 return FALSE;
3874 }
3875 }
3876 return FALSE;
3877 }
3878
3879
3880
3881
3882 /*************************************************
3883 * Check POSIX class name *
3884 *************************************************/
3885
3886 /* This function is called to check the name given in a POSIX-style class entry
3887 such as [:alnum:].
3888
3889 Arguments:
3890 ptr points to the first letter
3891 len the length of the name
3892
3893 Returns: a value representing the name, or -1 if unknown
3894 */
3895
3896 static int
3897 check_posix_name(const pcre_uchar *ptr, int len)
3898 {
3899 const char *pn = posix_names;
3900 register int yield = 0;
3901 while (posix_name_lengths[yield] != 0)
3902 {
3903 if (len == posix_name_lengths[yield] &&
3904 STRNCMP_UC_C8(ptr, pn, (unsigned int)len) == 0) return yield;
3905 pn += posix_name_lengths[yield] + 1;
3906 yield++;
3907 }
3908 return -1;
3909 }
3910
3911
3912 /*************************************************
3913 * Adjust OP_RECURSE items in repeated group *
3914 *************************************************/
3915
3916 /* OP_RECURSE items contain an offset from the start of the regex to the group
3917 that is referenced. This means that groups can be replicated for fixed
3918 repetition simply by copying (because the recursion is allowed to refer to
3919 earlier groups that are outside the current group). However, when a group is
3920 optional (i.e. the minimum quantifier is zero), OP_BRAZERO or OP_SKIPZERO is
3921 inserted before it, after it has been compiled. This means that any OP_RECURSE
3922 items within it that refer to the group itself or any contained groups have to
3923 have their offsets adjusted. That one of the jobs of this function. Before it
3924 is called, the partially compiled regex must be temporarily terminated with
3925 OP_END.
3926
3927 This function has been extended with the possibility of forward references for
3928 recursions and subroutine calls. It must also check the list of such references
3929 for the group we are dealing with. If it finds that one of the recursions in
3930 the current group is on this list, it adjusts the offset in the list, not the
3931 value in the reference (which is a group number).
3932
3933 Arguments:
3934 group points to the start of the group
3935 adjust the amount by which the group is to be moved
3936 utf TRUE in UTF-8 / UTF-16 / UTF-32 mode
3937 cd contains pointers to tables etc.
3938 save_hwm the hwm forward reference pointer at the start of the group
3939
3940 Returns: nothing
3941 */
3942
3943 static void
3944 adjust_recurse(pcre_uchar *group, int adjust, BOOL utf, compile_data *cd,
3945 pcre_uchar *save_hwm)
3946 {
3947 pcre_uchar *ptr = group;
3948
3949 while ((ptr = (pcre_uchar *)find_recurse(ptr, utf)) != NULL)
3950 {
3951 int offset;
3952 pcre_uchar *hc;
3953
3954 /* See if this recursion is on the forward reference list. If so, adjust the
3955 reference. */
3956
3957 for (hc = save_hwm; hc < cd->hwm; hc += LINK_SIZE)
3958 {
3959 offset = (int)GET(hc, 0);
3960 if (cd->start_code + offset == ptr + 1)
3961 {
3962 PUT(hc, 0, offset + adjust);
3963 break;
3964 }
3965 }
3966
3967 /* Otherwise, adjust the recursion offset if it's after the start of this
3968 group. */
3969
3970 if (hc >= cd->hwm)
3971 {
3972 offset = (int)GET(ptr, 1);
3973 if (cd->start_code + offset >= group) PUT(ptr, 1, offset + adjust);
3974 }
3975
3976 ptr += 1 + LINK_SIZE;
3977 }
3978 }
3979
3980
3981
3982 /*************************************************
3983 * Insert an automatic callout point *
3984 *************************************************/
3985
3986 /* This function is called when the PCRE_AUTO_CALLOUT option is set, to insert
3987 callout points before each pattern item.
3988
3989 Arguments:
3990 code current code pointer
3991 ptr current pattern pointer
3992 cd pointers to tables etc
3993
3994 Returns: new code pointer
3995 */
3996
3997 static pcre_uchar *
3998 auto_callout(pcre_uchar *code, const pcre_uchar *ptr, compile_data *cd)
3999 {
4000 *code++ = OP_CALLOUT;
4001 *code++ = 255;
4002 PUT(code, 0, (int)(ptr - cd->start_pattern)); /* Pattern offset */
4003 PUT(code, LINK_SIZE, 0); /* Default length */
4004 return code + 2 * LINK_SIZE;
4005 }
4006
4007
4008
4009 /*************************************************
4010 * Complete a callout item *
4011 *************************************************/
4012
4013 /* A callout item contains the length of the next item in the pattern, which
4014 we can't fill in till after we have reached the relevant point. This is used
4015 for both automatic and manual callouts.
4016
4017 Arguments:
4018 previous_callout points to previous callout item
4019 ptr current pattern pointer
4020 cd pointers to tables etc
4021
4022 Returns: nothing
4023 */
4024
4025 static void
4026 complete_callout(pcre_uchar *previous_callout, const pcre_uchar *ptr, compile_data *cd)
4027 {
4028 int length = (int)(ptr - cd->start_pattern - GET(previous_callout, 2));
4029 PUT(previous_callout, 2 + LINK_SIZE, length);
4030 }
4031
4032
4033
4034 #ifdef SUPPORT_UCP
4035 /*************************************************
4036 * Get othercase range *
4037 *************************************************/
4038
4039 /* This function is passed the start and end of a class range, in UTF-8 mode
4040 with UCP support. It searches up the characters, looking for ranges of
4041 characters in the "other" case. Each call returns the next one, updating the
4042 start address. A character with multiple other cases is returned on its own
4043 with a special return value.
4044
4045 Arguments:
4046 cptr points to starting character value; updated
4047 d end value
4048 ocptr where to put start of othercase range
4049 odptr where to put end of othercase range
4050
4051 Yield: -1 when no more
4052 0 when a range is returned
4053 >0 the CASESET offset for char with multiple other cases
4054 in this case, ocptr contains the original
4055 */
4056
4057 static int
4058 get_othercase_range(pcre_uint32 *cptr, pcre_uint32 d, pcre_uint32 *ocptr,
4059 pcre_uint32 *odptr)
4060 {
4061 pcre_uint32 c, othercase, next;
4062 unsigned int co;
4063
4064 /* Find the first character that has an other case. If it has multiple other
4065 cases, return its case offset value. */
4066
4067 for (c = *cptr; c <= d; c++)
4068 {
4069 if ((co = UCD_CASESET(c)) != 0)
4070 {
4071 *ocptr = c++; /* Character that has the set */
4072 *cptr = c; /* Rest of input range */
4073 return (int)co;
4074 }
4075 if ((othercase = UCD_OTHERCASE(c)) != c) break;
4076 }
4077
4078 if (c > d) return -1; /* Reached end of range */
4079
4080 /* Found a character that has a single other case. Search for the end of the
4081 range, which is either the end of the input range, or a character that has zero
4082 or more than one other cases. */
4083
4084 *ocptr = othercase;
4085 next = othercase + 1;
4086
4087 for (++c; c <= d; c++)
4088 {
4089 if ((co = UCD_CASESET(c)) != 0 || UCD_OTHERCASE(c) != next) break;
4090 next++;
4091 }
4092
4093 *odptr = next - 1; /* End of othercase range */
4094 *cptr = c; /* Rest of input range */
4095 return 0;
4096 }
4097 #endif /* SUPPORT_UCP */
4098
4099
4100
4101 /*************************************************
4102 * Add a character or range to a class *
4103 *************************************************/
4104
4105 /* This function packages up the logic of adding a character or range of
4106 characters to a class. The character values in the arguments will be within the
4107 valid values for the current mode (8-bit, 16-bit, UTF, etc). This function is
4108 mutually recursive with the function immediately below.
4109
4110 Arguments:
4111 classbits the bit map for characters < 256
4112 uchardptr points to the pointer for extra data
4113 options the options word
4114 cd contains pointers to tables etc.
4115 start start of range character
4116 end end of range character
4117
4118 Returns: the number of < 256 characters added
4119 the pointer to extra data is updated
4120 */
4121
4122 static int
4123 add_to_class(pcre_uint8 *classbits, pcre_uchar **uchardptr, int options,
4124 compile_data *cd, pcre_uint32 start, pcre_uint32 end)
4125 {
4126 pcre_uint32 c;
4127 pcre_uint32 classbits_end = (end <= 0xff ? end : 0xff);
4128 int n8 = 0;
4129
4130 /* If caseless matching is required, scan the range and process alternate
4131 cases. In Unicode, there are 8-bit characters that have alternate cases that
4132 are greater than 255 and vice-versa. Sometimes we can just extend the original
4133 range. */
4134
4135 if ((options & PCRE_CASELESS) != 0)
4136 {
4137 #ifdef SUPPORT_UCP
4138 if ((options & PCRE_UTF8) != 0)
4139 {
4140 int rc;
4141 pcre_uint32 oc, od;
4142
4143 options &= ~PCRE_CASELESS; /* Remove for recursive calls */
4144 c = start;
4145
4146 while ((rc = get_othercase_range(&c, end, &oc, &od)) >= 0)
4147 {
4148 /* Handle a single character that has more than one other case. */
4149
4150 if (rc > 0) n8 += add_list_to_class(classbits, uchardptr, options, cd,
4151 PRIV(ucd_caseless_sets) + rc, oc);
4152
4153 /* Do nothing if the other case range is within the original range. */
4154
4155 else if (oc >= start && od <= end) continue;
4156
4157 /* Extend the original range if there is overlap, noting that if oc < c, we
4158 can't have od > end because a subrange is always shorter than the basic
4159 range. Otherwise, use a recursive call to add the additional range. */
4160
4161 else if (oc < start && od >= start - 1) start = oc; /* Extend downwards */
4162 else if (od > end && oc <= end + 1) end = od; /* Extend upwards */
4163 else n8 += add_to_class(classbits, uchardptr, options, cd, oc, od);
4164 }
4165 }
4166 else
4167 #endif /* SUPPORT_UCP */
4168
4169 /* Not UTF-mode, or no UCP */
4170
4171 for (c = start; c <= classbits_end; c++)
4172 {
4173 SETBIT(classbits, cd->fcc[c]);
4174 n8++;
4175 }
4176 }
4177
4178 /* Now handle the original range. Adjust the final value according to the bit
4179 length - this means that the same lists of (e.g.) horizontal spaces can be used
4180 in all cases. */
4181
4182 #if defined COMPILE_PCRE8
4183 #ifdef SUPPORT_UTF
4184 if ((options & PCRE_UTF8) == 0)
4185 #endif
4186 if (end > 0xff) end = 0xff;
4187
4188 #elif defined COMPILE_PCRE16
4189 #ifdef SUPPORT_UTF
4190 if ((options & PCRE_UTF16) == 0)
4191 #endif
4192 if (end > 0xffff) end = 0xffff;
4193
4194 #endif /* COMPILE_PCRE[8|16] */
4195
4196 /* Use the bitmap for characters < 256. Otherwise use extra data.*/
4197
4198 for (c = start; c <= classbits_end; c++)
4199 {
4200 /* Regardless of start, c will always be <= 255. */
4201 SETBIT(classbits, c);
4202 n8++;
4203 }
4204
4205 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
4206 if (start <= 0xff) start = 0xff + 1;
4207
4208 if (end >= start)
4209 {
4210 pcre_uchar *uchardata = *uchardptr;
4211 #ifdef SUPPORT_UTF
4212 if ((options & PCRE_UTF8) != 0) /* All UTFs use the same flag bit */
4213 {
4214 if (start < end)
4215 {
4216 *uchardata++ = XCL_RANGE;
4217 uchardata += PRIV(ord2utf)(start, uchardata);
4218 uchardata += PRIV(ord2utf)(end, uchardata);
4219 }
4220 else if (start == end)
4221 {
4222 *uchardata++ = XCL_SINGLE;
4223 uchardata += PRIV(ord2utf)(start, uchardata);
4224 }
4225 }
4226 else
4227 #endif /* SUPPORT_UTF */
4228
4229 /* Without UTF support, character values are constrained by the bit length,
4230 and can only be > 256 for 16-bit and 32-bit libraries. */
4231
4232 #ifdef COMPILE_PCRE8
4233 {}
4234 #else
4235 if (start < end)
4236 {
4237 *uchardata++ = XCL_RANGE;
4238 *uchardata++ = start;
4239 *uchardata++ = end;
4240 }
4241 else if (start == end)
4242 {
4243 *uchardata++ = XCL_SINGLE;
4244 *uchardata++ = start;
4245 }
4246 #endif
4247
4248 *uchardptr = uchardata; /* Updata extra data pointer */
4249 }
4250 #endif /* SUPPORT_UTF || !COMPILE_PCRE8 */
4251
4252 return n8; /* Number of 8-bit characters */
4253 }
4254
4255
4256
4257
4258 /*************************************************
4259 * Add a list of characters to a class *
4260 *************************************************/
4261
4262 /* This function is used for adding a list of case-equivalent characters to a
4263 class, and also for adding a list of horizontal or vertical whitespace. If the
4264 list is in order (which it should be), ranges of characters are detected and
4265 handled appropriately. This function is mutually recursive with the function
4266 above.
4267
4268 Arguments:
4269 classbits the bit map for characters < 256
4270 uchardptr points to the pointer for extra data
4271 options the options word
4272 cd contains pointers to tables etc.
4273 p points to row of 32-bit values, terminated by NOTACHAR
4274 except character to omit; this is used when adding lists of
4275 case-equivalent characters to avoid including the one we
4276 already know about
4277
4278 Returns: the number of < 256 characters added
4279 the pointer to extra data is updated
4280 */
4281
4282 static int
4283 add_list_to_class(pcre_uint8 *classbits, pcre_uchar **uchardptr, int options,
4284 compile_data *cd, const pcre_uint32 *p, unsigned int except)
4285 {
4286 int n8 = 0;
4287 while (p[0] < NOTACHAR)
4288 {
4289 int n = 0;
4290 if (p[0] != except)
4291 {
4292 while(p[n+1] == p[0] + n + 1) n++;
4293 n8 += add_to_class(classbits, uchardptr, options, cd, p[0], p[n]);
4294 }
4295 p += n + 1;
4296 }
4297 return n8;
4298 }
4299
4300
4301
4302 /*************************************************
4303 * Add characters not in a list to a class *
4304 *************************************************/
4305
4306 /* This function is used for adding the complement of a list of horizontal or
4307 vertical whitespace to a class. The list must be in order.
4308
4309 Arguments:
4310 classbits the bit map for characters < 256
4311 uchardptr points to the pointer for extra data
4312 options the options word
4313 cd contains pointers to tables etc.
4314 p points to row of 32-bit values, terminated by NOTACHAR
4315
4316 Returns: the number of < 256 characters added
4317 the pointer to extra data is updated
4318 */
4319
4320 static int
4321 add_not_list_to_class(pcre_uint8 *classbits, pcre_uchar **uchardptr,
4322 int options, compile_data *cd, const pcre_uint32 *p)
4323 {
4324 BOOL utf = (options & PCRE_UTF8) != 0;
4325 int n8 = 0;
4326 if (p[0] > 0)
4327 n8 += add_to_class(classbits, uchardptr, options, cd, 0, p[0] - 1);
4328 while (p[0] < NOTACHAR)
4329 {
4330 while (p[1] == p[0] + 1) p++;
4331 n8 += add_to_class(classbits, uchardptr, options, cd, p[0] + 1,
4332 (p[1] == NOTACHAR) ? (utf ? 0x10ffffu : 0xffffffffu) : p[1] - 1);
4333 p++;
4334 }
4335 return n8;
4336 }
4337
4338
4339
4340 /*************************************************
4341 * Compile one branch *
4342 *************************************************/
4343
4344 /* Scan the pattern, compiling it into the a vector. If the options are
4345 changed during the branch, the pointer is used to change the external options
4346 bits. This function is used during the pre-compile phase when we are trying
4347 to find out the amount of memory needed, as well as during the real compile
4348 phase. The value of lengthptr distinguishes the two phases.
4349
4350 Arguments:
4351 optionsptr pointer to the option bits
4352 codeptr points to the pointer to the current code point
4353 ptrptr points to the current pattern pointer
4354 errorcodeptr points to error code variable
4355 firstcharptr place to put the first required character
4356 firstcharflagsptr place to put the first character flags, or a negative number
4357 reqcharptr place to put the last required character
4358 reqcharflagsptr place to put the last required character flags, or a negative number
4359 bcptr points to current branch chain
4360 cond_depth conditional nesting depth
4361 cd contains pointers to tables etc.
4362 lengthptr NULL during the real compile phase
4363 points to length accumulator during pre-compile phase
4364
4365 Returns: TRUE on success
4366 FALSE, with *errorcodeptr set non-zero on error
4367 */
4368
4369 static BOOL
4370 compile_branch(int *optionsptr, pcre_uchar **codeptr,
4371 const pcre_uchar **ptrptr, int *errorcodeptr,
4372 pcre_uint32 *firstcharptr, pcre_int32 *firstcharflagsptr,
4373 pcre_uint32 *reqcharptr, pcre_int32 *reqcharflagsptr,
4374 branch_chain *bcptr, int cond_depth,
4375 compile_data *cd, int *lengthptr)
4376 {
4377 int repeat_type, op_type;
4378 int repeat_min = 0, repeat_max = 0; /* To please picky compilers */
4379 int bravalue = 0;
4380 int greedy_default, greedy_non_default;
4381 pcre_uint32 firstchar, reqchar;
4382 pcre_int32 firstcharflags, reqcharflags;
4383 pcre_uint32 zeroreqchar, zerofirstchar;
4384 pcre_int32 zeroreqcharflags, zerofirstcharflags;
4385 pcre_int32 req_caseopt, reqvary, tempreqvary;
4386 int options = *optionsptr; /* May change dynamically */
4387 int after_manual_callout = 0;
4388 int length_prevgroup = 0;
4389 register pcre_uint32 c;
4390 int escape;
4391 register pcre_uchar *code = *codeptr;
4392 pcre_uchar *last_code = code;
4393 pcre_uchar *orig_code = code;
4394 pcre_uchar *tempcode;
4395 BOOL inescq = FALSE;
4396 BOOL groupsetfirstchar = FALSE;
4397 const pcre_uchar *ptr = *ptrptr;
4398 const pcre_uchar *tempptr;
4399 const pcre_uchar *nestptr = NULL;
4400 pcre_uchar *previous = NULL;
4401 pcre_uchar *previous_callout = NULL;
4402 pcre_uchar *save_hwm = NULL;
4403 pcre_uint8 classbits[32];
4404
4405 /* We can fish out the UTF-8 setting once and for all into a BOOL, but we
4406 must not do this for other options (e.g. PCRE_EXTENDED) because they may change
4407 dynamically as we process the pattern. */
4408
4409 #ifdef SUPPORT_UTF
4410 /* PCRE_UTF[16|32] have the same value as PCRE_UTF8. */
4411 BOOL utf = (options & PCRE_UTF8) != 0;
4412 #ifndef COMPILE_PCRE32
4413 pcre_uchar utf_chars[6];
4414 #endif
4415 #else
4416 BOOL utf = FALSE;
4417 #endif
4418
4419 /* Helper variables for OP_XCLASS opcode (for characters > 255). We define
4420 class_uchardata always so that it can be passed to add_to_class() always,
4421 though it will not be used in non-UTF 8-bit cases. This avoids having to supply
4422 alternative calls for the different cases. */
4423
4424 pcre_uchar *class_uchardata;
4425 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
4426 BOOL xclass;
4427 pcre_uchar *class_uchardata_base;
4428 #endif
4429
4430 #ifdef PCRE_DEBUG
4431 if (lengthptr != NULL) DPRINTF((">> start branch\n"));
4432 #endif
4433
4434 /* Set up the default and non-default settings for greediness */
4435
4436 greedy_default = ((options & PCRE_UNGREEDY) != 0);
4437 greedy_non_default = greedy_default ^ 1;
4438
4439 /* Initialize no first byte, no required byte. REQ_UNSET means "no char
4440 matching encountered yet". It gets changed to REQ_NONE if we hit something that
4441 matches a non-fixed char first char; reqchar just remains unset if we never
4442 find one.
4443
4444 When we hit a repeat whose minimum is zero, we may have to adjust these values
4445 to take the zero repeat into account. This is implemented by setting them to
4446 zerofirstbyte and zeroreqchar when such a repeat is encountered. The individual
4447 item types that can be repeated set these backoff variables appropriately. */
4448
4449 firstchar = reqchar = zerofirstchar = zeroreqchar = 0;
4450 firstcharflags = reqcharflags = zerofirstcharflags = zeroreqcharflags = REQ_UNSET;
4451
4452 /* The variable req_caseopt contains either the REQ_CASELESS value
4453 or zero, according to the current setting of the caseless flag. The
4454 REQ_CASELESS leaves the lower 28 bit empty. It is added into the
4455 firstchar or reqchar variables to record the case status of the
4456 value. This is used only for ASCII characters. */
4457
4458 req_caseopt = ((options & PCRE_CASELESS) != 0)? REQ_CASELESS:0;
4459
4460 /* Switch on next character until the end of the branch */
4461
4462 for (;; ptr++)
4463 {
4464 BOOL negate_class;
4465 BOOL should_flip_negation;
4466 BOOL possessive_quantifier;
4467 BOOL is_quantifier;
4468 BOOL is_recurse;
4469 BOOL reset_bracount;
4470 int class_has_8bitchar;
4471 int class_one_char;
4472 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
4473 BOOL xclass_has_prop;
4474 #endif
4475 int newoptions;
4476 int recno;
4477 int refsign;
4478 int skipbytes;
4479 pcre_uint32 subreqchar, subfirstchar;
4480 pcre_int32 subreqcharflags, subfirstcharflags;
4481 int terminator;
4482 unsigned int mclength;
4483 unsigned int tempbracount;
4484 pcre_uint32 ec;
4485 pcre_uchar mcbuffer[8];
4486
4487 /* Get next character in the pattern */
4488
4489 c = *ptr;
4490
4491 /* If we are at the end of a nested substitution, revert to the outer level
4492 string. Nesting only happens one level deep. */
4493
4494 if (c == CHAR_NULL && nestptr != NULL)
4495 {
4496 ptr = nestptr;
4497 nestptr = NULL;
4498 c = *ptr;
4499 }
4500
4501 /* If we are in the pre-compile phase, accumulate the length used for the
4502 previous cycle of this loop. */
4503
4504 if (lengthptr != NULL)
4505 {
4506 #ifdef PCRE_DEBUG
4507 if (code > cd->hwm) cd->hwm = code; /* High water info */
4508 #endif
4509 if (code > cd->start_workspace + cd->workspace_size -
4510 WORK_SIZE_SAFETY_MARGIN) /* Check for overrun */
4511 {
4512 *errorcodeptr = ERR52;
4513 goto FAILED;
4514 }
4515
4516 /* There is at least one situation where code goes backwards: this is the
4517 case of a zero quantifier after a class (e.g. [ab]{0}). At compile time,
4518 the class is simply eliminated. However, it is created first, so we have to
4519 allow memory for it. Therefore, don't ever reduce the length at this point.
4520 */
4521
4522 if (code < last_code) code = last_code;
4523
4524 /* Paranoid check for integer overflow */
4525
4526 if (OFLOW_MAX - *lengthptr < code - last_code)
4527 {
4528 *errorcodeptr = ERR20;
4529 goto FAILED;
4530 }
4531
4532 *lengthptr += (int)(code - last_code);
4533 DPRINTF(("length=%d added %d c=%c (0x%x)\n", *lengthptr,
4534 (int)(code - last_code), c, c));
4535
4536 /* If "previous" is set and it is not at the start of the work space, move
4537 it back to there, in order to avoid filling up the work space. Otherwise,
4538 if "previous" is NULL, reset the current code pointer to the start. */
4539
4540 if (previous != NULL)
4541 {
4542 if (previous > orig_code)
4543 {
4544 memmove(orig_code, previous, IN_UCHARS(code - previous));
4545 code -= previous - orig_code;
4546 previous = orig_code;
4547 }
4548 }
4549 else code = orig_code;
4550
4551 /* Remember where this code item starts so we can pick up the length
4552 next time round. */
4553
4554 last_code = code;
4555 }
4556
4557 /* In the real compile phase, just check the workspace used by the forward
4558 reference list. */
4559
4560 else if (cd->hwm > cd->start_workspace + cd->workspace_size -
4561 WORK_SIZE_SAFETY_MARGIN)
4562 {
4563 *errorcodeptr = ERR52;
4564 goto FAILED;
4565 }
4566
4567 /* If in \Q...\E, check for the end; if not, we have a literal */
4568
4569 if (inescq && c != CHAR_NULL)
4570 {
4571 if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E)
4572 {
4573 inescq = FALSE;
4574 ptr++;
4575 continue;
4576 }
4577 else
4578 {
4579 if (previous_callout != NULL)
4580 {
4581 if (lengthptr == NULL) /* Don't attempt in pre-compile phase */
4582 complete_callout(previous_callout, ptr, cd);
4583 previous_callout = NULL;
4584 }
4585 if ((options & PCRE_AUTO_CALLOUT) != 0)
4586 {
4587 previous_callout = code;
4588 code = auto_callout(code, ptr, cd);
4589 }
4590 goto NORMAL_CHAR;
4591 }
4592 /* Control does not reach here. */
4593 }
4594
4595 /* In extended mode, skip white space and comments. We need a loop in order
4596 to check for more white space and more comments after a comment. */
4597
4598 if ((options & PCRE_EXTENDED) != 0)
4599 {
4600 for (;;)
4601 {
4602 while (MAX_255(c) && (cd->ctypes[c] & ctype_space) != 0) c = *(++ptr);
4603 if (c != CHAR_NUMBER_SIGN) break;
4604 ptr++;
4605 while (*ptr != CHAR_NULL)
4606 {
4607 if (IS_NEWLINE(ptr)) /* For non-fixed-length newline cases, */
4608 { /* IS_NEWLINE sets cd->nllen. */
4609 ptr += cd->nllen;
4610 break;
4611 }
4612 ptr++;
4613 #ifdef SUPPORT_UTF
4614 if (utf) FORWARDCHAR(ptr);
4615 #endif
4616 }
4617 c = *ptr; /* Either NULL or the char after a newline */
4618 }
4619 }
4620
4621 /* See if the next thing is a quantifier. */
4622
4623 is_quantifier =
4624 c == CHAR_ASTERISK || c == CHAR_PLUS || c == CHAR_QUESTION_MARK ||
4625 (c == CHAR_LEFT_CURLY_BRACKET && is_counted_repeat(ptr+1));
4626
4627 /* Fill in length of a previous callout, except when the next thing is a
4628 quantifier or when processing a property substitution string in UCP mode. */
4629
4630 if (!is_quantifier && previous_callout != NULL && nestptr == NULL &&
4631 after_manual_callout-- <= 0)
4632 {
4633 if (lengthptr == NULL) /* Don't attempt in pre-compile phase */
4634 complete_callout(previous_callout, ptr, cd);
4635 previous_callout = NULL;
4636 }
4637
4638 /* Create auto callout, except for quantifiers, or while processing property
4639 strings that are substituted for \w etc in UCP mode. */
4640
4641 if ((options & PCRE_AUTO_CALLOUT) != 0 && !is_quantifier && nestptr == NULL)
4642 {
4643 previous_callout = code;
4644 code = auto_callout(code, ptr, cd);
4645 }
4646
4647 /* Process the next pattern item. */
4648
4649 switch(c)
4650 {
4651 /* ===================================================================*/
4652 case CHAR_NULL: /* The branch terminates at string end */
4653 case CHAR_VERTICAL_LINE: /* or | or ) */
4654 case CHAR_RIGHT_PARENTHESIS:
4655 *firstcharptr = firstchar;
4656 *firstcharflagsptr = firstcharflags;
4657 *reqcharptr = reqchar;
4658 *reqcharflagsptr = reqcharflags;
4659 *codeptr = code;
4660 *ptrptr = ptr;
4661 if (lengthptr != NULL)
4662 {
4663 if (OFLOW_MAX - *lengthptr < code - last_code)
4664 {
4665 *errorcodeptr = ERR20;
4666 goto FAILED;
4667 }
4668 *lengthptr += (int)(code - last_code); /* To include callout length */
4669 DPRINTF((">> end branch\n"));
4670 }
4671 return TRUE;
4672
4673
4674 /* ===================================================================*/
4675 /* Handle single-character metacharacters. In multiline mode, ^ disables
4676 the setting of any following char as a first character. */
4677
4678 case CHAR_CIRCUMFLEX_ACCENT:
4679 previous = NULL;
4680 if ((options & PCRE_MULTILINE) != 0)
4681 {
4682 if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
4683 *code++ = OP_CIRCM;
4684 }
4685 else *code++ = OP_CIRC;
4686 break;
4687
4688 case CHAR_DOLLAR_SIGN:
4689 previous = NULL;
4690 *code++ = ((options & PCRE_MULTILINE) != 0)? OP_DOLLM : OP_DOLL;
4691 break;
4692
4693 /* There can never be a first char if '.' is first, whatever happens about
4694 repeats. The value of reqchar doesn't change either. */
4695
4696 case CHAR_DOT:
4697 if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
4698 zerofirstchar = firstchar;
4699 zerofirstcharflags = firstcharflags;
4700 zeroreqchar = reqchar;
4701 zeroreqcharflags = reqcharflags;
4702 previous = code;
4703 *code++ = ((options & PCRE_DOTALL) != 0)? OP_ALLANY: OP_ANY;
4704 break;
4705
4706
4707 /* ===================================================================*/
4708 /* Character classes. If the included characters are all < 256, we build a
4709 32-byte bitmap of the permitted characters, except in the special case
4710 where there is only one such character. For negated classes, we build the
4711 map as usual, then invert it at the end. However, we use a different opcode
4712 so that data characters > 255 can be handled correctly.
4713
4714 If the class contains characters outside the 0-255 range, a different
4715 opcode is compiled. It may optionally have a bit map for characters < 256,
4716 but those above are are explicitly listed afterwards. A flag byte tells
4717 whether the bitmap is present, and whether this is a negated class or not.
4718
4719 In JavaScript compatibility mode, an isolated ']' causes an error. In
4720 default (Perl) mode, it is treated as a data character. */
4721
4722 case CHAR_RIGHT_SQUARE_BRACKET:
4723 if ((cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0)
4724 {
4725 *errorcodeptr = ERR64;
4726 goto FAILED;
4727 }
4728 goto NORMAL_CHAR;
4729
4730 /* In another (POSIX) regex library, the ugly syntax [[:<:]] and [[:>:]] is
4731 used for "start of word" and "end of word". As these are otherwise illegal
4732 sequences, we don't break anything by recognizing them. They are replaced
4733 by \b(?=\w) and \b(?<=\w) respectively. Sequences like [a[:<:]] are
4734 erroneous and are handled by the normal code below. */
4735
4736 case CHAR_LEFT_SQUARE_BRACKET:
4737 if (STRNCMP_UC_C8(ptr+1, STRING_WEIRD_STARTWORD, 6) == 0)
4738 {
4739 nestptr = ptr + 7;
4740 ptr = sub_start_of_word - 1;
4741 continue;
4742 }
4743
4744 if (STRNCMP_UC_C8(ptr+1, STRING_WEIRD_ENDWORD, 6) == 0)
4745 {
4746 nestptr = ptr + 7;
4747 ptr = sub_end_of_word - 1;
4748 continue;
4749 }
4750
4751 /* Handle a real character class. */
4752
4753 previous = code;
4754
4755 /* PCRE supports POSIX class stuff inside a class. Perl gives an error if
4756 they are encountered at the top level, so we'll do that too. */
4757
4758 if ((ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
4759 ptr[1] == CHAR_EQUALS_SIGN) &&
4760 check_posix_syntax(ptr, &tempptr))
4761 {
4762 *errorcodeptr = (ptr[1] == CHAR_COLON)? ERR13 : ERR31;
4763 goto FAILED;
4764 }
4765
4766 /* If the first character is '^', set the negation flag and skip it. Also,
4767 if the first few characters (either before or after ^) are \Q\E or \E we
4768 skip them too. This makes for compatibility with Perl. */
4769
4770 negate_class = FALSE;
4771 for (;;)
4772 {
4773 c = *(++ptr);
4774 if (c == CHAR_BACKSLASH)
4775 {
4776 if (ptr[1] == CHAR_E)
4777 ptr++;
4778 else if (STRNCMP_UC_C8(ptr + 1, STR_Q STR_BACKSLASH STR_E, 3) == 0)
4779 ptr += 3;
4780 else
4781 break;
4782 }
4783 else if (!negate_class && c == CHAR_CIRCUMFLEX_ACCENT)
4784 negate_class = TRUE;
4785 else break;
4786 }
4787
4788 /* Empty classes are allowed in JavaScript compatibility mode. Otherwise,
4789 an initial ']' is taken as a data character -- the code below handles
4790 that. In JS mode, [] must always fail, so generate OP_FAIL, whereas
4791 [^] must match any character, so generate OP_ALLANY. */
4792
4793 if (c == CHAR_RIGHT_SQUARE_BRACKET &&
4794 (cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0)
4795 {
4796 *code++ = negate_class? OP_ALLANY : OP_FAIL;
4797 if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
4798 zerofirstchar = firstchar;
4799 zerofirstcharflags = firstcharflags;
4800 break;
4801 }
4802
4803 /* If a class contains a negative special such as \S, we need to flip the
4804 negation flag at the end, so that support for characters > 255 works
4805 correctly (they are all included in the class). */
4806
4807 should_flip_negation = FALSE;
4808
4809 /* Extended class (xclass) will be used when characters > 255
4810 might match. */
4811
4812 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
4813 xclass = FALSE;
4814 class_uchardata = code + LINK_SIZE + 2; /* For XCLASS items */
4815 class_uchardata_base = class_uchardata; /* Save the start */
4816 #endif
4817
4818 /* For optimization purposes, we track some properties of the class:
4819 class_has_8bitchar will be non-zero if the class contains at least one <
4820 256 character; class_one_char will be 1 if the class contains just one
4821 character; xclass_has_prop will be TRUE if unicode property checks
4822 are present in the class. */
4823
4824 class_has_8bitchar = 0;
4825 class_one_char = 0;
4826 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
4827 xclass_has_prop = FALSE;
4828 #endif
4829
4830 /* Initialize the 32-char bit map to all zeros. We build the map in a
4831 temporary bit of memory, in case the class contains fewer than two
4832 8-bit characters because in that case the compiled code doesn't use the bit
4833 map. */
4834
4835 memset(classbits, 0, 32 * sizeof(pcre_uint8));
4836
4837 /* Process characters until ] is reached. By writing this as a "do" it
4838 means that an initial ] is taken as a data character. At the start of the
4839 loop, c contains the first byte of the character. */
4840
4841 if (c != CHAR_NULL) do
4842 {
4843 const pcre_uchar *oldptr;
4844
4845 #ifdef SUPPORT_UTF
4846 if (utf && HAS_EXTRALEN(c))
4847 { /* Braces are required because the */
4848 GETCHARLEN(c, ptr, ptr); /* macro generates multiple statements */
4849 }
4850 #endif
4851
4852 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
4853 /* In the pre-compile phase, accumulate the length of any extra
4854 data and reset the pointer. This is so that very large classes that
4855 contain a zillion > 255 characters no longer overwrite the work space
4856 (which is on the stack). We have to remember that there was XCLASS data,
4857 however. */
4858
4859 if (lengthptr != NULL && class_uchardata > class_uchardata_base)
4860 {
4861 xclass = TRUE;
4862 *lengthptr += class_uchardata - class_uchardata_base;
4863 class_uchardata = class_uchardata_base;
4864 }
4865 #endif
4866
4867 /* Inside \Q...\E everything is literal except \E */
4868
4869 if (inescq)
4870 {
4871 if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E) /* If we are at \E */
4872 {
4873 inescq = FALSE; /* Reset literal state */
4874 ptr++; /* Skip the 'E' */
4875 continue; /* Carry on with next */
4876 }
4877 goto CHECK_RANGE; /* Could be range if \E follows */
4878 }
4879
4880 /* Handle POSIX class names. Perl allows a negation extension of the
4881 form [:^name:]. A square bracket that doesn't match the syntax is
4882 treated as a literal. We also recognize the POSIX constructions
4883 [.ch.] and [=ch=] ("collating elements") and fault them, as Perl
4884 5.6 and 5.8 do. */
4885
4886 if (c == CHAR_LEFT_SQUARE_BRACKET &&
4887 (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
4888 ptr[1] == CHAR_EQUALS_SIGN) && check_posix_syntax(ptr, &tempptr))
4889 {
4890 BOOL local_negate = FALSE;
4891 int posix_class, taboffset, tabopt;
4892 register const pcre_uint8 *cbits = cd->cbits;
4893 pcre_uint8 pbits[32];
4894
4895 if (ptr[1] != CHAR_COLON)
4896 {
4897 *errorcodeptr = ERR31;
4898 goto FAILED;
4899 }
4900
4901 ptr += 2;
4902 if (*ptr == CHAR_CIRCUMFLEX_ACCENT)
4903 {
4904 local_negate = TRUE;
4905 should_flip_negation = TRUE; /* Note negative special */
4906 ptr++;
4907 }
4908
4909 posix_class = check_posix_name(ptr, (int)(tempptr - ptr));
4910 if (posix_class < 0)
4911 {
4912 *errorcodeptr = ERR30;
4913 goto FAILED;
4914 }
4915
4916 /* If matching is caseless, upper and lower are converted to
4917 alpha. This relies on the fact that the class table starts with
4918 alpha, lower, upper as the first 3 entries. */
4919
4920 if ((options & PCRE_CASELESS) != 0 && posix_class <= 2)
4921 posix_class = 0;
4922
4923 /* When PCRE_UCP is set, some of the POSIX classes are converted to
4924 different escape sequences that use Unicode properties \p or \P. Others
4925 that are not available via \p or \P generate XCL_PROP/XCL_NOTPROP
4926 directly. */
4927
4928 #ifdef SUPPORT_UCP
4929 if ((options & PCRE_UCP) != 0)
4930 {
4931 unsigned int ptype = 0;
4932 int pc = posix_class + ((local_negate)? POSIX_SUBSIZE/2 : 0);
4933
4934 /* The posix_substitutes table specifies which POSIX classes can be
4935 converted to \p or \P items. */
4936
4937 if (posix_substitutes[pc] != NULL)
4938 {
4939 nestptr = tempptr + 1;
4940 ptr = posix_substitutes[pc] - 1;
4941 continue;
4942 }
4943
4944 /* There are three other classes that generate special property calls
4945 that are recognized only in an XCLASS. */
4946
4947 else switch(posix_class)
4948 {
4949 case PC_GRAPH:
4950 ptype = PT_PXGRAPH;
4951 /* Fall through */
4952 case PC_PRINT:
4953 if (ptype == 0) ptype = PT_PXPRINT;
4954 /* Fall through */
4955 case PC_PUNCT:
4956 if (ptype == 0) ptype = PT_PXPUNCT;
4957 *class_uchardata++ = local_negate? XCL_NOTPROP : XCL_PROP;
4958 *class_uchardata++ = ptype;
4959 *class_uchardata++ = 0;
4960 xclass_has_prop = TRUE;
4961 ptr = tempptr + 1;
4962 continue;
4963
4964 /* For all other POSIX classes, no special action is taken in UCP
4965 mode. Fall through to the non_UCP case. */
4966
4967 default:
4968 break;
4969 }
4970 }
4971 #endif
4972 /* In the non-UCP case, or when UCP makes no difference, we build the
4973 bit map for the POSIX class in a chunk of local store because we may be
4974 adding and subtracting from it, and we don't want to subtract bits that
4975 may be in the main map already. At the end we or the result into the
4976 bit map that is being built. */
4977
4978 posix_class *= 3;
4979
4980 /* Copy in the first table (always present) */
4981
4982 memcpy(pbits, cbits + posix_class_maps[posix_class],
4983 32 * sizeof(pcre_uint8));
4984
4985 /* If there is a second table, add or remove it as required. */
4986
4987 taboffset = posix_class_maps[posix_class + 1];
4988 tabopt = posix_class_maps[posix_class + 2];
4989
4990 if (taboffset >= 0)
4991 {
4992 if (tabopt >= 0)
4993 for (c = 0; c < 32; c++) pbits[c] |= cbits[c + taboffset];
4994 else
4995 for (c = 0; c < 32; c++) pbits[c] &= ~cbits[c + taboffset];
4996 }
4997
4998 /* Now see if we need to remove any special characters. An option
4999 value of 1 removes vertical space and 2 removes underscore. */
5000
5001 if (tabopt < 0) tabopt = -tabopt;
5002 if (tabopt == 1) pbits[1] &= ~0x3c;
5003 else if (tabopt == 2) pbits[11] &= 0x7f;
5004
5005 /* Add the POSIX table or its complement into the main table that is
5006 being built and we are done. */
5007
5008 if (local_negate)
5009 for (c = 0; c < 32; c++) classbits[c] |= ~pbits[c];
5010 else
5011 for (c = 0; c < 32; c++) classbits[c] |= pbits[c];
5012
5013 ptr = tempptr + 1;
5014 /* Every class contains at least one < 256 character. */
5015 class_has_8bitchar = 1;
5016 /* Every class contains at least two characters. */
5017 class_one_char = 2;
5018 continue; /* End of POSIX syntax handling */
5019 }
5020
5021 /* Backslash may introduce a single character, or it may introduce one
5022 of the specials, which just set a flag. The sequence \b is a special
5023 case. Inside a class (and only there) it is treated as backspace. We
5024 assume that other escapes have more than one character in them, so
5025 speculatively set both class_has_8bitchar and class_one_char bigger
5026 than one. Unrecognized escapes fall through and are either treated
5027 as literal characters (by default), or are faulted if
5028 PCRE_EXTRA is set. */
5029
5030 if (c == CHAR_BACKSLASH)
5031 {
5032 escape = check_escape(&ptr, &ec, errorcodeptr, cd->bracount, options,
5033 TRUE);
5034 if (*errorcodeptr != 0) goto FAILED;
5035 if (escape == 0) c = ec;
5036 else if (escape == ESC_b) c = CHAR_BS; /* \b is backspace in a class */
5037 else if (escape == ESC_N) /* \N is not supported in a class */
5038 {
5039 *errorcodeptr = ERR71;
5040 goto FAILED;
5041 }
5042 else if (escape == ESC_Q) /* Handle start of quoted string */
5043 {
5044 if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
5045 {
5046 ptr += 2; /* avoid empty string */
5047 }
5048 else inescq = TRUE;
5049 continue;
5050 }
5051 else if (escape == ESC_E) continue; /* Ignore orphan \E */
5052
5053 else
5054 {
5055 register const pcre_uint8 *cbits = cd->cbits;
5056 /* Every class contains at least two < 256 characters. */
5057 class_has_8bitchar++;
5058 /* Every class contains at least two characters. */
5059 class_one_char += 2;
5060
5061 switch (escape)
5062 {
5063 #ifdef SUPPORT_UCP
5064 case ESC_du: /* These are the values given for \d etc */
5065 case ESC_DU: /* when PCRE_UCP is set. We replace the */
5066 case ESC_wu: /* escape sequence with an appropriate \p */
5067 case ESC_WU: /* or \P to test Unicode properties instead */
5068 case ESC_su: /* of the default ASCII testing. */
5069 case ESC_SU:
5070 nestptr = ptr;
5071 ptr = substitutes[escape - ESC_DU] - 1; /* Just before substitute */
5072 class_has_8bitchar--; /* Undo! */
5073 continue;
5074 #endif
5075 case ESC_d:
5076 for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_digit];
5077 continue;
5078
5079 case ESC_D:
5080 should_flip_negation = TRUE;
5081 for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_digit];
5082 continue;
5083
5084 case ESC_w:
5085 for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_word];
5086 continue;
5087
5088 case ESC_W:
5089 should_flip_negation = TRUE;
5090 for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_word];
5091 continue;
5092
5093 /* Perl 5.004 onwards omitted VT from \s, but restored it at Perl
5094 5.18. Before PCRE 8.34, we had to preserve the VT bit if it was
5095 previously set by something earlier in the character class.
5096 Luckily, the value of CHAR_VT is 0x0b in both ASCII and EBCDIC, so
5097 we could just adjust the appropriate bit. From PCRE 8.34 we no
5098 longer treat \s and \S specially. */
5099
5100 case ESC_s:
5101 for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_space];
5102 continue;
5103
5104 case ESC_S:
5105 should_flip_negation = TRUE;
5106 for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_space];
5107 continue;
5108
5109 /* The rest apply in both UCP and non-UCP cases. */
5110
5111 case ESC_h:
5112 (void)add_list_to_class(classbits, &class_uchardata, options, cd,
5113 PRIV(hspace_list), NOTACHAR);
5114 continue;
5115
5116 case ESC_H:
5117 (void)add_not_list_to_class(classbits, &class_uchardata, options,
5118 cd, PRIV(hspace_list));
5119 continue;
5120
5121 case ESC_v:
5122 (void)add_list_to_class(classbits, &class_uchardata, options, cd,
5123 PRIV(vspace_list), NOTACHAR);
5124 continue;
5125
5126 case ESC_V:
5127 (void)add_not_list_to_class(classbits, &class_uchardata, options,
5128 cd, PRIV(vspace_list));
5129 continue;
5130
5131 #ifdef SUPPORT_UCP
5132 case ESC_p:
5133 case ESC_P:
5134 {
5135 BOOL negated;
5136 unsigned int ptype = 0, pdata = 0;
5137 if (!get_ucp(&ptr, &negated, &ptype, &pdata, errorcodeptr))
5138 goto FAILED;
5139 *class_uchardata++ = ((escape == ESC_p) != negated)?
5140 XCL_PROP : XCL_NOTPROP;
5141 *class_uchardata++ = ptype;
5142 *class_uchardata++ = pdata;
5143 xclass_has_prop = TRUE;
5144 class_has_8bitchar--; /* Undo! */
5145 continue;
5146 }
5147 #endif
5148 /* Unrecognized escapes are faulted if PCRE is running in its
5149 strict mode. By default, for compatibility with Perl, they are
5150 treated as literals. */
5151
5152 default:
5153 if ((options & PCRE_EXTRA) != 0)
5154 {
5155 *errorcodeptr = ERR7;
5156 goto FAILED;
5157 }
5158 class_has_8bitchar--; /* Undo the speculative increase. */
5159 class_one_char -= 2; /* Undo the speculative increase. */
5160 c = *ptr; /* Get the final character and fall through */
5161 break;
5162 }
5163 }
5164
5165 /* Fall through if the escape just defined a single character (c >= 0).
5166 This may be greater than 256. */
5167
5168 escape = 0;
5169
5170 } /* End of backslash handling */
5171
5172 /* A character may be followed by '-' to form a range. However, Perl does
5173 not permit ']' to be the end of the range. A '-' character at the end is
5174 treated as a literal. Perl ignores orphaned \E sequences entirely. The
5175 code for handling \Q and \E is messy. */
5176
5177 CHECK_RANGE:
5178 while (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
5179 {
5180 inescq = FALSE;
5181 ptr += 2;
5182 }
5183 oldptr = ptr;
5184
5185 /* Remember if \r or \n were explicitly used */
5186
5187 if (c == CHAR_CR || c == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF;
5188
5189 /* Check for range */
5190
5191 if (!inescq && ptr[1] == CHAR_MINUS)
5192 {
5193 pcre_uint32 d;
5194 ptr += 2;
5195 while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E) ptr += 2;
5196
5197 /* If we hit \Q (not followed by \E) at this point, go into escaped
5198 mode. */
5199
5200 while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_Q)
5201 {
5202 ptr += 2;
5203 if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E)
5204 { ptr += 2; continue; }
5205 inescq = TRUE;
5206 break;
5207 }
5208
5209 /* Minus (hyphen) at the end of a class is treated as a literal, so put
5210 back the pointer and jump to handle the character that preceded it. */
5211
5212 if (*ptr == CHAR_NULL || (!inescq && *ptr == CHAR_RIGHT_SQUARE_BRACKET))
5213 {
5214 ptr = oldptr;
5215 goto CLASS_SINGLE_CHARACTER;
5216 }
5217
5218 /* Otherwise, we have a potential range; pick up the next character */
5219
5220 #ifdef SUPPORT_UTF
5221 if (utf)
5222 { /* Braces are required because the */
5223 GETCHARLEN(d, ptr, ptr); /* macro generates multiple statements */
5224 }
5225 else
5226 #endif
5227 d = *ptr; /* Not UTF-8 mode */
5228
5229 /* The second part of a range can be a single-character escape
5230 sequence, but not any of the other escapes. Perl treats a hyphen as a
5231 literal in such circumstances. However, in Perl's warning mode, a
5232 warning is given, so PCRE now faults it as it is almost certainly a
5233 mistake on the user's part. */
5234
5235 if (!inescq)
5236 {
5237 if (d == CHAR_BACKSLASH)
5238 {
5239 int descape;
5240 descape = check_escape(&ptr, &d, errorcodeptr, cd->bracount, options, TRUE);
5241 if (*errorcodeptr != 0) goto FAILED;
5242
5243 /* 0 means a character was put into d; \b is backspace; any other
5244 special causes an error. */
5245
5246 if (descape != 0)
5247 {
5248 if (descape == ESC_b) d = CHAR_BS; else
5249 {
5250 *errorcodeptr = ERR83;
5251 goto FAILED;
5252 }
5253 }
5254 }
5255
5256 /* A hyphen followed by a POSIX class is treated in the same way. */
5257
5258 else if (d == CHAR_LEFT_SQUARE_BRACKET &&
5259 (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
5260 ptr[1] == CHAR_EQUALS_SIGN) &&
5261 check_posix_syntax(ptr, &tempptr))
5262 {
5263 *errorcodeptr = ERR83;
5264 goto FAILED;
5265 }
5266 }
5267
5268 /* Check that the two values are in the correct order. Optimize
5269 one-character ranges. */
5270
5271 if (d < c)
5272 {
5273 *errorcodeptr = ERR8;
5274 goto FAILED;
5275 }
5276 if (d == c) goto CLASS_SINGLE_CHARACTER; /* A few lines below */
5277
5278 /* We have found a character range, so single character optimizations
5279 cannot be done anymore. Any value greater than 1 indicates that there
5280 is more than one character. */
5281
5282 class_one_char = 2;
5283
5284 /* Remember an explicit \r or \n, and add the range to the class. */
5285
5286 if (d == CHAR_CR || d == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF;
5287
5288 class_has_8bitchar +=
5289 add_to_class(classbits, &class_uchardata, options, cd, c, d);
5290
5291 continue; /* Go get the next char in the class */
5292 }
5293
5294 /* Handle a single character - we can get here for a normal non-escape
5295 char, or after \ that introduces a single character or for an apparent
5296 range that isn't. Only the value 1 matters for class_one_char, so don't
5297 increase it if it is already 2 or more ... just in case there's a class
5298 with a zillion characters in it. */
5299
5300 CLASS_SINGLE_CHARACTER:
5301 if (class_one_char < 2) class_one_char++;
5302
5303 /* If class_one_char is 1, we have the first single character in the
5304 class, and there have been no prior ranges, or XCLASS items generated by
5305 escapes. If this is the final character in the class, we can optimize by
5306 turning the item into a 1-character OP_CHAR[I] if it's positive, or
5307 OP_NOT[I] if it's negative. In the positive case, it can cause firstchar
5308 to be set. Otherwise, there can be no first char if this item is first,
5309 whatever repeat count may follow. In the case of reqchar, save the
5310 previous value for reinstating. */
5311
5312 if (class_one_char == 1 && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
5313 {
5314 ptr++;
5315 zeroreqchar = reqchar;
5316 zeroreqcharflags = reqcharflags;
5317
5318 if (negate_class)
5319 {
5320 #ifdef SUPPORT_UCP
5321 int d;
5322 #endif
5323 if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
5324 zerofirstchar = firstchar;
5325 zerofirstcharflags = firstcharflags;
5326
5327 /* For caseless UTF-8 mode when UCP support is available, check
5328 whether this character has more than one other case. If so, generate
5329 a special OP_NOTPROP item instead of OP_NOTI. */
5330
5331 #ifdef SUPPORT_UCP
5332 if (utf && (options & PCRE_CASELESS) != 0 &&
5333 (d = UCD_CASESET(c)) != 0)
5334 {
5335 *code++ = OP_NOTPROP;
5336 *code++ = PT_CLIST;
5337 *code++ = d;
5338 }
5339 else
5340 #endif
5341 /* Char has only one other case, or UCP not available */
5342
5343 {
5344 *code++ = ((options & PCRE_CASELESS) != 0)? OP_NOTI: OP_NOT;
5345 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
5346 if (utf && c > MAX_VALUE_FOR_SINGLE_CHAR)
5347 code += PRIV(ord2utf)(c, code);
5348 else
5349 #endif
5350 *code++ = c;
5351 }
5352
5353 /* We are finished with this character class */
5354
5355 goto END_CLASS;
5356 }
5357
5358 /* For a single, positive character, get the value into mcbuffer, and
5359 then we can handle this with the normal one-character code. */
5360
5361 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
5362 if (utf && c > MAX_VALUE_FOR_SINGLE_CHAR)
5363 mclength = PRIV(ord2utf)(c, mcbuffer);
5364 else
5365 #endif
5366 {
5367 mcbuffer[0] = c;
5368 mclength = 1;
5369 }
5370 goto ONE_CHAR;
5371 } /* End of 1-char optimization */
5372
5373 /* There is more than one character in the class, or an XCLASS item
5374 has been generated. Add this character to the class. */
5375
5376 class_has_8bitchar +=
5377 add_to_class(classbits, &class_uchardata, options, cd, c, c);
5378 }
5379
5380 /* Loop until ']' reached. This "while" is the end of the "do" far above.
5381 If we are at the end of an internal nested string, revert to the outer
5382 string. */
5383
5384 while (((c = *(++ptr)) != CHAR_NULL ||
5385 (nestptr != NULL &&
5386 (ptr = nestptr, nestptr = NULL, c = *(++ptr)) != CHAR_NULL)) &&
5387 (c != CHAR_RIGHT_SQUARE_BRACKET || inescq));
5388
5389 /* Check for missing terminating ']' */
5390
5391 if (c == CHAR_NULL)
5392 {
5393 *errorcodeptr = ERR6;
5394 goto FAILED;
5395 }
5396
5397 /* We will need an XCLASS if data has been placed in class_uchardata. In
5398 the second phase this is a sufficient test. However, in the pre-compile
5399 phase, class_uchardata gets emptied to prevent workspace overflow, so it
5400 only if the very last character in the class needs XCLASS will it contain
5401 anything at this point. For this reason, xclass gets set TRUE above when
5402 uchar_classdata is emptied, and that's why this code is the way it is here
5403 instead of just doing a test on class_uchardata below. */
5404
5405 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
5406 if (class_uchardata > class_uchardata_base) xclass = TRUE;
5407 #endif
5408
5409 /* If this is the first thing in the branch, there can be no first char
5410 setting, whatever the repeat count. Any reqchar setting must remain
5411 unchanged after any kind of repeat. */
5412
5413 if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
5414 zerofirstchar = firstchar;
5415 zerofirstcharflags = firstcharflags;
5416 zeroreqchar = reqchar;
5417 zeroreqcharflags = reqcharflags;
5418
5419 /* If there are characters with values > 255, we have to compile an
5420 extended class, with its own opcode, unless there was a negated special
5421 such as \S in the class, and PCRE_UCP is not set, because in that case all
5422 characters > 255 are in the class, so any that were explicitly given as
5423 well can be ignored. If (when there are explicit characters > 255 that must
5424 be listed) there are no characters < 256, we can omit the bitmap in the
5425 actual compiled code. */
5426
5427 #ifdef SUPPORT_UTF
5428 if (xclass && (!should_flip_negation || (options & PCRE_UCP) != 0))
5429 #elif !defined COMPILE_PCRE8
5430 if (xclass && !should_flip_negation)
5431 #endif
5432 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
5433 {
5434 *class_uchardata++ = XCL_END; /* Marks the end of extra data */
5435 *code++ = OP_XCLASS;
5436 code += LINK_SIZE;
5437 *code = negate_class? XCL_NOT:0;
5438 if (xclass_has_prop) *code |= XCL_HASPROP;
5439
5440 /* If the map is required, move up the extra data to make room for it;
5441 otherwise just move the code pointer to the end of the extra data. */
5442
5443 if (class_has_8bitchar > 0)
5444 {
5445 *code++ |= XCL_MAP;
5446 memmove(code + (32 / sizeof(pcre_uchar)), code,
5447 IN_UCHARS(class_uchardata - code));
5448 if (negate_class && !xclass_has_prop)
5449 for (c = 0; c < 32; c++) classbits[c] = ~classbits[c];
5450 memcpy(code, classbits, 32);
5451 code = class_uchardata + (32 / sizeof(pcre_uchar));
5452 }
5453 else code = class_uchardata;
5454
5455 /* Now fill in the complete length of the item */
5456
5457 PUT(previous, 1, (int)(code - previous));
5458 break; /* End of class handling */
5459 }
5460 #endif
5461
5462 /* If there are no characters > 255, or they are all to be included or
5463 excluded, set the opcode to OP_CLASS or OP_NCLASS, depending on whether the
5464 whole class was negated and whether there were negative specials such as \S
5465 (non-UCP) in the class. Then copy the 32-byte map into the code vector,
5466 negating it if necessary. */
5467
5468 *code++ = (negate_class == should_flip_negation) ? OP_CLASS : OP_NCLASS;
5469 if (lengthptr == NULL) /* Save time in the pre-compile phase */
5470 {
5471 if (negate_class)
5472 for (c = 0; c < 32; c++) classbits[c] = ~classbits[c];
5473 memcpy(code, classbits, 32);
5474 }
5475 code += 32 / sizeof(pcre_uchar);
5476
5477 END_CLASS:
5478 break;
5479
5480
5481 /* ===================================================================*/
5482 /* Various kinds of repeat; '{' is not necessarily a quantifier, but this
5483 has been tested above. */
5484
5485 case CHAR_LEFT_CURLY_BRACKET:
5486 if (!is_quantifier) goto NORMAL_CHAR;
5487 ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorcodeptr);
5488 if (*errorcodeptr != 0) goto FAILED;
5489 goto REPEAT;
5490
5491 case CHAR_ASTERISK:
5492 repeat_min = 0;
5493 repeat_max = -1;
5494 goto REPEAT;
5495
5496 case CHAR_PLUS:
5497 repeat_min = 1;
5498 repeat_max = -1;
5499 goto REPEAT;
5500
5501 case CHAR_QUESTION_MARK:
5502 repeat_min = 0;
5503 repeat_max = 1;
5504
5505 REPEAT:
5506 if (previous == NULL)
5507 {
5508 *errorcodeptr = ERR9;
5509 goto FAILED;
5510 }
5511
5512 if (repeat_min == 0)
5513 {
5514 firstchar = zerofirstchar; /* Adjust for zero repeat */
5515 firstcharflags = zerofirstcharflags;
5516 reqchar = zeroreqchar; /* Ditto */
5517 reqcharflags = zeroreqcharflags;
5518 }
5519
5520 /* Remember whether this is a variable length repeat */
5521
5522 reqvary = (repeat_min == repeat_max)? 0 : REQ_VARY;
5523
5524 op_type = 0; /* Default single-char op codes */
5525 possessive_quantifier = FALSE; /* Default not possessive quantifier */
5526
5527 /* Save start of previous item, in case we have to move it up in order to
5528 insert something before it. */
5529
5530 tempcode = previous;
5531
5532 /* Before checking for a possessive quantifier, we must skip over
5533 whitespace and comments in extended mode because Perl allows white space at
5534 this point. */
5535
5536 if ((options & PCRE_EXTENDED) != 0)
5537 {
5538 const pcre_uchar *p = ptr + 1;
5539 for (;;)
5540 {
5541 while (MAX_255(*p) && (cd->ctypes[*p] & ctype_space) != 0) p++;
5542 if (*p != CHAR_NUMBER_SIGN) break;
5543 p++;
5544 while (*p != CHAR_NULL)
5545 {
5546 if (IS_NEWLINE(p)) /* For non-fixed-length newline cases, */
5547 { /* IS_NEWLINE sets cd->nllen. */
5548 p += cd->nllen;
5549 break;
5550 }
5551 p++;
5552 #ifdef SUPPORT_UTF
5553 if (utf) FORWARDCHAR(p);
5554 #endif
5555 } /* Loop for comment characters */
5556 } /* Loop for multiple comments */
5557 ptr = p - 1; /* Character before the next significant one. */
5558 }
5559
5560 /* If the next character is '+', we have a possessive quantifier. This
5561 implies greediness, whatever the setting of the PCRE_UNGREEDY option.
5562 If the next character is '?' this is a minimizing repeat, by default,
5563 but if PCRE_UNGREEDY is set, it works the other way round. We change the
5564 repeat type to the non-default. */
5565
5566 if (ptr[1] == CHAR_PLUS)
5567 {
5568 repeat_type = 0; /* Force greedy */
5569 possessive_quantifier = TRUE;
5570 ptr++;
5571 }
5572 else if (ptr[1] == CHAR_QUESTION_MARK)
5573 {
5574 repeat_type = greedy_non_default;
5575 ptr++;
5576 }
5577 else repeat_type = greedy_default;
5578
5579 /* If previous was a recursion call, wrap it in atomic brackets so that
5580 previous becomes the atomic group. All recursions were so wrapped in the
5581 past, but it no longer happens for non-repeated recursions. In fact, the
5582 repeated ones could be re-implemented independently so as not to need this,
5583 but for the moment we rely on the code for repeating groups. */
5584
5585 if (*previous == OP_RECURSE)
5586 {
5587 memmove(previous + 1 + LINK_SIZE, previous, IN_UCHARS(1 + LINK_SIZE));
5588 *previous = OP_ONCE;
5589 PUT(previous, 1, 2 + 2*LINK_SIZE);
5590 previous[2 + 2*LINK_SIZE] = OP_KET;
5591 PUT(previous, 3 + 2*LINK_SIZE, 2 + 2*LINK_SIZE);
5592 code += 2 + 2 * LINK_SIZE;
5593 length_prevgroup = 3 + 3*LINK_SIZE;
5594
5595 /* When actually compiling, we need to check whether this was a forward
5596 reference, and if so, adjust the offset. */
5597
5598 if (lengthptr == NULL && cd->hwm >= cd->start_workspace + LINK_SIZE)
5599 {
5600 int offset = GET(cd->hwm, -LINK_SIZE);
5601 if (offset == previous + 1 - cd->start_code)
5602 PUT(cd->hwm, -LINK_SIZE, offset + 1 + LINK_SIZE);
5603 }
5604 }
5605
5606 /* Now handle repetition for the different types of item. */
5607
5608 /* If previous was a character or negated character match, abolish the item
5609 and generate a repeat item instead. If a char item has a minimum of more
5610 than one, ensure that it is set in reqchar - it might not be if a sequence
5611 such as x{3} is the first thing in a branch because the x will have gone
5612 into firstchar instead. */
5613
5614 if (*previous == OP_CHAR || *previous == OP_CHARI
5615 || *previous == OP_NOT || *previous == OP_NOTI)
5616 {
5617 switch (*previous)
5618 {
5619 default: /* Make compiler happy. */
5620 case OP_CHAR: op_type = OP_STAR - OP_STAR; break;
5621 case OP_CHARI: op_type = OP_STARI - OP_STAR; break;
5622 case OP_NOT: op_type = OP_NOTSTAR - OP_STAR; break;
5623 case OP_NOTI: op_type = OP_NOTSTARI - OP_STAR; break;
5624 }
5625
5626 /* Deal with UTF characters that take up more than one character. It's
5627 easier to write this out separately than try to macrify it. Use c to
5628 hold the length of the character in bytes, plus UTF_LENGTH to flag that
5629 it's a length rather than a small character. */
5630
5631 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
5632 if (utf && NOT_FIRSTCHAR(code[-1]))
5633 {
5634 pcre_uchar *lastchar = code - 1;
5635 BACKCHAR(lastchar);
5636 c = (int)(code - lastchar); /* Length of UTF-8 character */
5637 memcpy(utf_chars, lastchar, IN_UCHARS(c)); /* Save the char */
5638 c |= UTF_LENGTH; /* Flag c as a length */
5639 }
5640 else
5641 #endif /* SUPPORT_UTF */
5642
5643 /* Handle the case of a single charater - either with no UTF support, or
5644 with UTF disabled, or for a single character UTF character. */
5645 {
5646 c = code[-1];
5647 if (*previous <= OP_CHARI && repeat_min > 1)
5648 {
5649 reqchar = c;
5650 reqcharflags = req_caseopt | cd->req_varyopt;
5651 }
5652 }
5653
5654 goto OUTPUT_SINGLE_REPEAT; /* Code shared with single character types */
5655 }
5656
5657 /* If previous was a character type match (\d or similar), abolish it and
5658 create a suitable repeat item. The code is shared with single-character
5659 repeats by setting op_type to add a suitable offset into repeat_type. Note
5660 the the Unicode property types will be present only when SUPPORT_UCP is
5661 defined, but we don't wrap the little bits of code here because it just
5662 makes it horribly messy. */
5663
5664 else if (*previous < OP_EODN)
5665 {
5666 pcre_uchar *oldcode;
5667 int prop_type, prop_value;
5668 op_type = OP_TYPESTAR - OP_STAR; /* Use type opcodes */
5669 c = *previous;
5670
5671 OUTPUT_SINGLE_REPEAT:
5672 if (*previous == OP_PROP || *previous == OP_NOTPROP)
5673 {
5674 prop_type = previous[1];
5675 prop_value = previous[2];
5676 }
5677 else prop_type = prop_value = -1;
5678
5679 oldcode = code;
5680 code = previous; /* Usually overwrite previous item */
5681
5682 /* If the maximum is zero then the minimum must also be zero; Perl allows
5683 this case, so we do too - by simply omitting the item altogether. */
5684
5685 if (repeat_max == 0) goto END_REPEAT;
5686
5687 /* Combine the op_type with the repeat_type */
5688
5689 repeat_type += op_type;
5690
5691 /* A minimum of zero is handled either as the special case * or ?, or as
5692 an UPTO, with the maximum given. */
5693
5694 if (repeat_min == 0)
5695 {
5696 if (repeat_max == -1) *code++ = OP_STAR + repeat_type;
5697 else if (repeat_max == 1) *code++ = OP_QUERY + repeat_type;
5698 else
5699 {
5700 *code++ = OP_UPTO + repeat_type;
5701 PUT2INC(code, 0, repeat_max);
5702 }
5703 }
5704
5705 /* A repeat minimum of 1 is optimized into some special cases. If the
5706 maximum is unlimited, we use OP_PLUS. Otherwise, the original item is
5707 left in place and, if the maximum is greater than 1, we use OP_UPTO with
5708 one less than the maximum. */
5709
5710 else if (repeat_min == 1)
5711 {
5712 if (repeat_max == -1)
5713 *code++ = OP_PLUS + repeat_type;
5714 else
5715 {
5716 code = oldcode; /* leave previous item in place */
5717 if (repeat_max == 1) goto END_REPEAT;
5718 *code++ = OP_UPTO + repeat_type;
5719 PUT2INC(code, 0, repeat_max - 1);
5720 }
5721 }
5722
5723 /* The case {n,n} is just an EXACT, while the general case {n,m} is
5724 handled as an EXACT followed by an UPTO. */
5725
5726 else
5727 {
5728 *code++ = OP_EXACT + op_type; /* NB EXACT doesn't have repeat_type */
5729 PUT2INC(code, 0, repeat_min);
5730
5731 /* If the maximum is unlimited, insert an OP_STAR. Before doing so,
5732 we have to insert the character for the previous code. For a repeated
5733 Unicode property match, there are two extra bytes that define the
5734 required property. In UTF-8 mode, long characters have their length in
5735 c, with the UTF_LENGTH bit as a flag. */
5736
5737 if (repeat_max < 0)
5738 {
5739 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
5740 if (utf && (c & UTF_LENGTH) != 0)
5741 {
5742 memcpy(code, utf_chars, IN_UCHARS(c & 7));
5743 code += c & 7;
5744 }
5745 else
5746 #endif
5747 {
5748 *code++ = c;
5749 if (prop_type >= 0)
5750 {
5751 *code++ = prop_type;
5752 *code++ = prop_value;
5753 }
5754 }
5755 *code++ = OP_STAR + repeat_type;
5756 }
5757
5758 /* Else insert an UPTO if the max is greater than the min, again
5759 preceded by the character, for the previously inserted code. If the
5760 UPTO is just for 1 instance, we can use QUERY instead. */
5761
5762 else if (repeat_max != repeat_min)
5763 {
5764 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
5765 if (utf && (c & UTF_LENGTH) != 0)
5766 {
5767 memcpy(code, utf_chars, IN_UCHARS(c & 7));
5768 code += c & 7;
5769 }
5770 else
5771 #endif
5772 *code++ = c;
5773 if (prop_type >= 0)
5774 {
5775 *code++ = prop_type;
5776 *code++ = prop_value;
5777 }
5778 repeat_max -= repeat_min;
5779
5780 if (repeat_max == 1)
5781 {
5782 *code++ = OP_QUERY + repeat_type;
5783 }
5784 else
5785 {
5786 *code++ = OP_UPTO + repeat_type;
5787 PUT2INC(code, 0, repeat_max);
5788 }
5789 }
5790 }
5791
5792 /* The character or character type itself comes last in all cases. */
5793
5794 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
5795 if (utf && (c & UTF_LENGTH) != 0)
5796 {
5797 memcpy(code, utf_chars, IN_UCHARS(c & 7));
5798 code += c & 7;
5799 }
5800 else
5801 #endif
5802 *code++ = c;
5803
5804 /* For a repeated Unicode property match, there are two extra bytes that
5805 define the required property. */
5806
5807 #ifdef SUPPORT_UCP
5808 if (prop_type >= 0)
5809 {
5810 *code++ = prop_type;
5811 *code++ = prop_value;
5812 }
5813 #endif
5814 }
5815
5816 /* If previous was a character class or a back reference, we put the repeat
5817 stuff after it, but just skip the item if the repeat was {0,0}. */
5818
5819 else if (*previous == OP_CLASS || *previous == OP_NCLASS ||
5820 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
5821 *previous == OP_XCLASS ||
5822 #endif
5823 *previous == OP_REF || *previous == OP_REFI ||
5824 *previous == OP_DNREF || *previous == OP_DNREFI)
5825 {
5826 if (repeat_max == 0)
5827 {
5828 code = previous;
5829 goto END_REPEAT;
5830 }
5831
5832 if (repeat_min == 0 && repeat_max == -1)
5833 *code++ = OP_CRSTAR + repeat_type;
5834 else if (repeat_min == 1 && repeat_max == -1)
5835 *code++ = OP_CRPLUS + repeat_type;
5836 else if (repeat_min == 0 && repeat_max == 1)
5837 *code++ = OP_CRQUERY + repeat_type;
5838 else
5839 {
5840 *code++ = OP_CRRANGE + repeat_type;
5841 PUT2INC(code, 0, repeat_min);
5842 if (repeat_max == -1) repeat_max = 0; /* 2-byte encoding for max */
5843 PUT2INC(code, 0, repeat_max);
5844 }
5845 }
5846
5847 /* If previous was a bracket group, we may have to replicate it in certain
5848 cases. Note that at this point we can encounter only the "basic" bracket
5849 opcodes such as BRA and CBRA, as this is the place where they get converted
5850 into the more special varieties such as BRAPOS and SBRA. A test for >=
5851 OP_ASSERT and <= OP_COND includes ASSERT, ASSERT_NOT, ASSERTBACK,
5852 ASSERTBACK_NOT, ONCE, ONCE_NC, BRA, BRAPOS, CBRA, CBRAPOS, and COND.
5853 Originally, PCRE did not allow repetition of assertions, but now it does,
5854 for Perl compatibility. */
5855
5856 else if (*previous >= OP_ASSERT && *previous <= OP_COND)
5857 {
5858 register int i;
5859 int len = (int)(code - previous);
5860 pcre_uchar *bralink = NULL;
5861 pcre_uchar *brazeroptr = NULL;
5862
5863 /* Repeating a DEFINE group is pointless, but Perl allows the syntax, so
5864 we just ignore the repeat. */
5865
5866 if (*previous == OP_COND && previous[LINK_SIZE+1] == OP_DEF)
5867 goto END_REPEAT;
5868
5869 /* There is no sense in actually repeating assertions. The only potential
5870 use of repetition is in cases when the assertion is optional. Therefore,
5871 if the minimum is greater than zero, just ignore the repeat. If the
5872 maximum is not zero or one, set it to 1. */
5873
5874 if (*previous < OP_ONCE) /* Assertion */
5875 {
5876 if (repeat_min > 0) goto END_REPEAT;
5877 if (repeat_max < 0 || repeat_max > 1) repeat_max = 1;
5878 }
5879
5880 /* The case of a zero minimum is special because of the need to stick
5881 OP_BRAZERO in front of it, and because the group appears once in the
5882 data, whereas in other cases it appears the minimum number of times. For
5883 this reason, it is simplest to treat this case separately, as otherwise
5884 the code gets far too messy. There are several special subcases when the
5885 minimum is zero. */
5886
5887 if (repeat_min == 0)
5888 {
5889 /* If the maximum is also zero, we used to just omit the group from the
5890 output altogether, like this:
5891
5892 ** if (repeat_max == 0)
5893 ** {
5894 ** code = previous;
5895 ** goto END_REPEAT;
5896 ** }
5897
5898 However, that fails when a group or a subgroup within it is referenced
5899 as a subroutine from elsewhere in the pattern, so now we stick in
5900 OP_SKIPZERO in front of it so that it is skipped on execution. As we
5901 don't have a list of which groups are referenced, we cannot do this
5902 selectively.
5903
5904 If the maximum is 1 or unlimited, we just have to stick in the BRAZERO
5905 and do no more at this point. However, we do need to adjust any
5906 OP_RECURSE calls inside the group that refer to the group itself or any
5907 internal or forward referenced group, because the offset is from the
5908 start of the whole regex. Temporarily terminate the pattern while doing
5909 this. */
5910
5911 if (repeat_max <= 1) /* Covers 0, 1, and unlimited */
5912 {
5913 *code = OP_END;
5914 adjust_recurse(previous, 1, utf, cd, save_hwm);
5915 memmove(previous + 1, previous, IN_UCHARS(len));
5916 code++;
5917 if (repeat_max == 0)
5918 {
5919 *previous++ = OP_SKIPZERO;
5920 goto END_REPEAT;
5921 }
5922 brazeroptr = previous; /* Save for possessive optimizing */
5923 *previous++ = OP_BRAZERO + repeat_type;
5924 }
5925
5926 /* If the maximum is greater than 1 and limited, we have to replicate
5927 in a nested fashion, sticking OP_BRAZERO before each set of brackets.
5928 The first one has to be handled carefully because it's the original
5929 copy, which has to be moved up. The remainder can be handled by code
5930 that is common with the non-zero minimum case below. We have to
5931 adjust the value or repeat_max, since one less copy is required. Once
5932 again, we may have to adjust any OP_RECURSE calls inside the group. */
5933
5934 else
5935 {
5936 int offset;
5937 *code = OP_END;
5938 adjust_recurse(previous, 2 + LINK_SIZE, utf, cd, save_hwm);
5939 memmove(previous + 2 + LINK_SIZE, previous, IN_UCHARS(len));
5940 code += 2 + LINK_SIZE;
5941 *previous++ = OP_BRAZERO + repeat_type;
5942 *previous++ = OP_BRA;
5943
5944 /* We chain together the bracket offset fields that have to be
5945 filled in later when the ends of the brackets are reached. */
5946
5947 offset = (bralink == NULL)? 0 : (int)(previous - bralink);
5948 bralink = previous;
5949 PUTINC(previous, 0, offset);
5950 }
5951
5952 repeat_max--;
5953 }
5954
5955 /* If the minimum is greater than zero, replicate the group as many
5956 times as necessary, and adjust the maximum to the number of subsequent
5957 copies that we need. If we set a first char from the group, and didn't
5958 set a required char, copy the latter from the former. If there are any
5959 forward reference subroutine calls in the group, there will be entries on
5960 the workspace list; replicate these with an appropriate increment. */
5961
5962 else
5963 {
5964 if (repeat_min > 1)
5965 {
5966 /* In the pre-compile phase, we don't actually do the replication. We
5967 just adjust the length as if we had. Do some paranoid checks for
5968 potential integer overflow. The INT64_OR_DOUBLE type is a 64-bit
5969 integer type when available, otherwise double. */
5970
5971 if (lengthptr != NULL)
5972 {
5973 int delta = (repeat_min - 1)*length_prevgroup;
5974 if ((INT64_OR_DOUBLE)(repeat_min - 1)*
5975 (INT64_OR_DOUBLE)length_prevgroup >
5976 (INT64_OR_DOUBLE)INT_MAX ||
5977 OFLOW_MAX - *lengthptr < delta)
5978 {
5979 *errorcodeptr = ERR20;
5980 goto FAILED;
5981 }
5982 *lengthptr += delta;
5983 }
5984
5985 /* This is compiling for real. If there is a set first byte for
5986 the group, and we have not yet set a "required byte", set it. Make
5987 sure there is enough workspace for copying forward references before
5988 doing the copy. */
5989
5990 else
5991 {
5992 if (groupsetfirstchar && reqcharflags < 0)
5993 {
5994 reqchar = firstchar;
5995 reqcharflags = firstcharflags;
5996 }
5997
5998 for (i = 1; i < repeat_min; i++)
5999 {
6000 pcre_uchar *hc;
6001 pcre_uchar *this_hwm = cd->hwm;
6002 memcpy(code, previous, IN_UCHARS(len));
6003
6004 while (cd->hwm > cd->start_workspace + cd->workspace_size -
6005 WORK_SIZE_SAFETY_MARGIN - (this_hwm - save_hwm))
6006 {
6007 int save_offset = save_hwm - cd->start_workspace;
6008 int this_offset = this_hwm - cd->start_workspace;
6009 *errorcodeptr = expand_workspace(cd);
6010 if (*errorcodeptr != 0) goto FAILED;
6011 save_hwm = (pcre_uchar *)cd->start_workspace + save_offset;
6012 this_hwm = (pcre_uchar *)cd->start_workspace + this_offset;
6013 }
6014
6015 for (hc = save_hwm; hc < this_hwm; hc += LINK_SIZE)
6016 {
6017 PUT(cd->hwm, 0, GET(hc, 0) + len);
6018 cd->hwm += LINK_SIZE;
6019 }
6020 save_hwm = this_hwm;
6021 code += len;
6022 }
6023 }
6024 }
6025
6026 if (repeat_max > 0) repeat_max -= repeat_min;
6027 }
6028
6029 /* This code is common to both the zero and non-zero minimum cases. If
6030 the maximum is limited, it replicates the group in a nested fashion,
6031 remembering the bracket starts on a stack. In the case of a zero minimum,
6032 the first one was set up above. In all cases the repeat_max now specifies
6033 the number of additional copies needed. Again, we must remember to
6034 replicate entries on the forward reference list. */
6035
6036 if (repeat_max >= 0)
6037 {
6038 /* In the pre-compile phase, we don't actually do the replication. We
6039 just adjust the length as if we had. For each repetition we must add 1
6040 to the length for BRAZERO and for all but the last repetition we must
6041 add 2 + 2*LINKSIZE to allow for the nesting that occurs. Do some
6042 paranoid checks to avoid integer overflow. The INT64_OR_DOUBLE type is
6043 a 64-bit integer type when available, otherwise double. */
6044
6045 if (lengthptr != NULL && repeat_max > 0)
6046 {
6047 int delta = repeat_max * (length_prevgroup + 1 + 2 + 2*LINK_SIZE) -
6048 2 - 2*LINK_SIZE; /* Last one doesn't nest */
6049 if ((INT64_OR_DOUBLE)repeat_max *
6050 (INT64_OR_DOUBLE)(length_prevgroup + 1 + 2 + 2*LINK_SIZE)
6051 > (INT64_OR_DOUBLE)INT_MAX ||
6052 OFLOW_MAX - *lengthptr < delta)
6053 {
6054 *errorcodeptr = ERR20;
6055 goto FAILED;
6056 }
6057 *lengthptr += delta;
6058 }
6059
6060 /* This is compiling for real */
6061
6062 else for (i = repeat_max - 1; i >= 0; i--)
6063 {
6064 pcre_uchar *hc;
6065 pcre_uchar *this_hwm = cd->hwm;
6066
6067 *code++ = OP_BRAZERO + repeat_type;
6068
6069 /* All but the final copy start a new nesting, maintaining the
6070 chain of brackets outstanding. */
6071
6072 if (i != 0)
6073 {
6074 int offset;
6075 *code++ = OP_BRA;
6076 offset = (bralink == NULL)? 0 : (int)(code - bralink);
6077 bralink = code;
6078 PUTINC(code, 0, offset);
6079 }
6080
6081 memcpy(code, previous, IN_UCHARS(len));
6082
6083 /* Ensure there is enough workspace for forward references before
6084 copying them. */
6085
6086 while (cd->hwm > cd->start_workspace + cd->workspace_size -
6087 WORK_SIZE_SAFETY_MARGIN - (this_hwm - save_hwm))
6088 {
6089 int save_offset = save_hwm - cd->start_workspace;
6090 int this_offset = this_hwm - cd->start_workspace;
6091 *errorcodeptr = expand_workspace(cd);
6092 if (*errorcodeptr != 0) goto FAILED;
6093 save_hwm = (pcre_uchar *)cd->start_workspace + save_offset;
6094 this_hwm = (pcre_uchar *)cd->start_workspace + this_offset;
6095 }
6096
6097 for (hc = save_hwm; hc < this_hwm; hc += LINK_SIZE)
6098 {
6099 PUT(cd->hwm, 0, GET(hc, 0) + len + ((i != 0)? 2+LINK_SIZE : 1));
6100 cd->hwm += LINK_SIZE;
6101 }
6102 save_hwm = this_hwm;
6103 code += len;
6104 }
6105
6106 /* Now chain through the pending brackets, and fill in their length
6107 fields (which are holding the chain links pro tem). */
6108
6109 while (bralink != NULL)
6110 {
6111 int oldlinkoffset;
6112 int offset = (int)(code - bralink + 1);
6113 pcre_uchar *bra = code - offset;
6114 oldlinkoffset = GET(bra, 1);
6115 bralink = (oldlinkoffset == 0)? NULL : bralink - oldlinkoffset;
6116 *code++ = OP_KET;
6117 PUTINC(code, 0, offset);
6118 PUT(bra, 1, offset);
6119 }
6120 }
6121
6122 /* If the maximum is unlimited, set a repeater in the final copy. For
6123 ONCE brackets, that's all we need to do. However, possessively repeated
6124 ONCE brackets can be converted into non-capturing brackets, as the
6125 behaviour of (?:xx)++ is the same as (?>xx)++ and this saves having to
6126 deal with possessive ONCEs specially.
6127
6128 Otherwise, when we are doing the actual compile phase, check to see
6129 whether this group is one that could match an empty string. If so,
6130 convert the initial operator to the S form (e.g. OP_BRA -> OP_SBRA) so
6131 that runtime checking can be done. [This check is also applied to ONCE
6132 groups at runtime, but in a different way.]
6133
6134 Then, if the quantifier was possessive and the bracket is not a
6135 conditional, we convert the BRA code to the POS form, and the KET code to
6136 KETRPOS. (It turns out to be convenient at runtime to detect this kind of
6137 subpattern at both the start and at the end.) The use of special opcodes
6138 makes it possible to reduce greatly the stack usage in pcre_exec(). If
6139 the group is preceded by OP_BRAZERO, convert this to OP_BRAPOSZERO.
6140
6141 Then, if the minimum number of matches is 1 or 0, cancel the possessive
6142 flag so that the default action below, of wrapping everything inside
6143 atomic brackets, does not happen. When the minimum is greater than 1,
6144 there will be earlier copies of the group, and so we still have to wrap
6145 the whole thing. */
6146
6147 else
6148 {
6149 pcre_uchar *ketcode = code - 1 - LINK_SIZE;
6150 pcre_uchar *bracode = ketcode - GET(ketcode, 1);
6151
6152 /* Convert possessive ONCE brackets to non-capturing */
6153
6154 if ((*bracode == OP_ONCE || *bracode == OP_ONCE_NC) &&
6155 possessive_quantifier) *bracode = OP_BRA;
6156
6157 /* For non-possessive ONCE brackets, all we need to do is to
6158 set the KET. */
6159
6160 if (*bracode == OP_ONCE || *bracode == OP_ONCE_NC)
6161 *ketcode = OP_KETRMAX + repeat_type;
6162
6163 /* Handle non-ONCE brackets and possessive ONCEs (which have been
6164 converted to non-capturing above). */
6165
6166 else
6167 {
6168 /* In the compile phase, check for empty string matching. */
6169
6170 if (lengthptr == NULL)
6171 {
6172 pcre_uchar *scode = bracode;
6173 do
6174 {
6175 if (could_be_empty_branch(scode, ketcode, utf, cd, NULL))
6176 {
6177 *bracode += OP_SBRA - OP_BRA;
6178 break;
6179 }
6180 scode += GET(scode, 1);
6181 }
6182 while (*scode == OP_ALT);
6183 }
6184
6185 /* Handle possessive quantifiers. */
6186
6187 if (possessive_quantifier)
6188 {
6189 /* For COND brackets, we wrap the whole thing in a possessively
6190 repeated non-capturing bracket, because we have not invented POS
6191 versions of the COND opcodes. Because we are moving code along, we
6192 must ensure that any pending recursive references are updated. */
6193
6194 if (*bracode == OP_COND || *bracode == OP_SCOND)
6195 {
6196 int nlen = (int)(code - bracode);
6197 *code = OP_END;
6198 adjust_recurse(bracode, 1 + LINK_SIZE, utf, cd, save_hwm);
6199 memmove(bracode + 1 + LINK_SIZE, bracode, IN_UCHARS(nlen));
6200 code += 1 + LINK_SIZE;
6201 nlen += 1 + LINK_SIZE;
6202 *bracode = OP_BRAPOS;
6203 *code++ = OP_KETRPOS;
6204 PUTINC(code, 0, nlen);
6205 PUT(bracode, 1, nlen);
6206 }
6207
6208 /* For non-COND brackets, we modify the BRA code and use KETRPOS. */
6209
6210 else
6211 {
6212 *bracode += 1; /* Switch to xxxPOS opcodes */
6213 *ketcode = OP_KETRPOS;
6214 }
6215
6216 /* If the minimum is zero, mark it as possessive, then unset the
6217 possessive flag when the minimum is 0 or 1. */
6218
6219 if (brazeroptr != NULL) *brazeroptr = OP_BRAPOSZERO;
6220 if (repeat_min < 2) possessive_quantifier = FALSE;
6221 }
6222
6223 /* Non-possessive quantifier */
6224
6225 else *ketcode = OP_KETRMAX + repeat_type;
6226 }
6227 }
6228 }
6229
6230 /* If previous is OP_FAIL, it was generated by an empty class [] in
6231 JavaScript mode. The other ways in which OP_FAIL can be generated, that is
6232 by (*FAIL) or (?!) set previous to NULL, which gives a "nothing to repeat"
6233 error above. We can just ignore the repeat in JS case. */
6234
6235 else if (*previous == OP_FAIL) goto END_REPEAT;
6236
6237 /* Else there's some kind of shambles */
6238
6239 else
6240 {
6241 *errorcodeptr = ERR11;
6242 goto FAILED;
6243 }
6244
6245 /* If the character following a repeat is '+', possessive_quantifier is
6246 TRUE. For some opcodes, there are special alternative opcodes for this
6247 case. For anything else, we wrap the entire repeated item inside OP_ONCE
6248 brackets. Logically, the '+' notation is just syntactic sugar, taken from
6249 Sun's Java package, but the special opcodes can optimize it.
6250
6251 Some (but not all) possessively repeated subpatterns have already been
6252 completely handled in the code just above. For them, possessive_quantifier
6253 is always FALSE at this stage. Note that the repeated item starts at
6254 tempcode, not at previous, which might be the first part of a string whose
6255 (former) last char we repeated. */
6256
6257 if (possessive_quantifier)
6258 {
6259 int len;
6260
6261 /* Possessifying an EXACT quantifier has no effect, so we can ignore it.
6262 However, QUERY, STAR, or UPTO may follow (for quantifiers such as {5,6},
6263 {5,}, or {5,10}). We skip over an EXACT item; if the length of what
6264 remains is greater than zero, there's a further opcode that can be
6265 handled. If not, do nothing, leaving the EXACT alone. */
6266
6267 switch(*tempcode)
6268 {
6269 case OP_TYPEEXACT:
6270 tempcode += PRIV(OP_lengths)[*tempcode] +
6271 ((tempcode[1 + IMM2_SIZE] == OP_PROP
6272 || tempcode[1 + IMM2_SIZE] == OP_NOTPROP)? 2 : 0);
6273 break;
6274
6275 /* CHAR opcodes are used for exacts whose count is 1. */
6276
6277 case OP_CHAR:
6278 case OP_CHARI:
6279 case OP_NOT:
6280 case OP_NOTI:
6281 case OP_EXACT:
6282 case OP_EXACTI:
6283 case OP_NOTEXACT:
6284 case OP_NOTEXACTI:
6285 tempcode += PRIV(OP_lengths)[*tempcode];
6286 #ifdef SUPPORT_UTF
6287 if (utf && HAS_EXTRALEN(tempcode[-1]))
6288 tempcode += GET_EXTRALEN(tempcode[-1]);
6289 #endif
6290 break;
6291
6292 /* For the class opcodes, the repeat operator appears at the end;
6293 adjust tempcode to point to it. */
6294
6295 case OP_CLASS:
6296 case OP_NCLASS:
6297 tempcode += 1 + 32/sizeof(pcre_uchar);
6298 break;
6299
6300 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
6301 case OP_XCLASS:
6302 tempcode += GET(tempcode, 1);
6303 break;
6304 #endif
6305 }
6306
6307 /* If tempcode is equal to code (which points to the end of the repeated
6308 item), it means we have skipped an EXACT item but there is no following
6309 QUERY, STAR, or UPTO; the value of len will be 0, and we do nothing. In
6310 all other cases, tempcode will be pointing to the repeat opcode, and will
6311 be less than code, so the value of len will be greater than 0. */
6312
6313 len = (int)(code - tempcode);
6314 if (len > 0)
6315 {
6316 unsigned int repcode = *tempcode;
6317
6318 /* There is a table for possessifying opcodes, all of which are less
6319 than OP_CALLOUT. A zero entry means there is no possessified version.
6320 */
6321
6322 if (repcode < OP_CALLOUT && opcode_possessify[repcode] > 0)
6323 *tempcode = opcode_possessify[repcode];
6324
6325 /* For opcode without a special possessified version, wrap the item in
6326 ONCE brackets. Because we are moving code along, we must ensure that any
6327 pending recursive references are updated. */
6328
6329 else
6330 {
6331 *code = OP_END;
6332 adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm);
6333 memmove(tempcode + 1 + LINK_SIZE, tempcode, IN_UCHARS(len));
6334 code += 1 + LINK_SIZE;
6335 len += 1 + LINK_SIZE;
6336 tempcode[0] = OP_ONCE;
6337 *code++ = OP_KET;
6338 PUTINC(code, 0, len);
6339 PUT(tempcode, 1, len);
6340 }
6341 }
6342
6343 #ifdef NEVER
6344 if (len > 0) switch (*tempcode)
6345 {
6346 case OP_STAR: *tempcode = OP_POSSTAR; break;
6347 case OP_PLUS: *tempcode = OP_POSPLUS; break;
6348 case OP_QUERY: *tempcode = OP_POSQUERY; break;
6349 case OP_UPTO: *tempcode = OP_POSUPTO; break;
6350
6351 case OP_STARI: *tempcode = OP_POSSTARI; break;
6352 case OP_PLUSI: *tempcode = OP_POSPLUSI; break;
6353 case OP_QUERYI: *tempcode = OP_POSQUERYI; break;
6354 case OP_UPTOI: *tempcode = OP_POSUPTOI; break;
6355
6356 case OP_NOTSTAR: *tempcode = OP_NOTPOSSTAR; break;
6357 case OP_NOTPLUS: *tempcode = OP_NOTPOSPLUS; break;
6358 case OP_NOTQUERY: *tempcode = OP_NOTPOSQUERY; break;
6359 case OP_NOTUPTO: *tempcode = OP_NOTPOSUPTO; break;
6360
6361 case OP_NOTSTARI: *tempcode = OP_NOTPOSSTARI; break;
6362 case OP_NOTPLUSI: *tempcode = OP_NOTPOSPLUSI; break;
6363 case OP_NOTQUERYI: *tempcode = OP_NOTPOSQUERYI; break;
6364 case OP_NOTUPTOI: *tempcode = OP_NOTPOSUPTOI; break;
6365
6366 case OP_TYPESTAR: *tempcode = OP_TYPEPOSSTAR; break;
6367 case OP_TYPEPLUS: *tempcode = OP_TYPEPOSPLUS; break;
6368 case OP_TYPEQUERY: *tempcode = OP_TYPEPOSQUERY; break;
6369 case OP_TYPEUPTO: *tempcode = OP_TYPEPOSUPTO; break;
6370
6371 case OP_CRSTAR: *tempcode = OP_CRPOSSTAR; break;
6372 case OP_CRPLUS: *tempcode = OP_CRPOSPLUS; break;
6373 case OP_CRQUERY: *tempcode = OP_CRPOSQUERY; break;
6374 case OP_CRRANGE: *tempcode = OP_CRPOSRANGE; break;
6375
6376 /* Because we are moving code along, we must ensure that any
6377 pending recursive references are updated. */
6378
6379 default:
6380 *code = OP_END;
6381 adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm);
6382 memmove(tempcode + 1 + LINK_SIZE, tempcode, IN_UCHARS(len));
6383 code += 1 + LINK_SIZE;
6384 len += 1 + LINK_SIZE;
6385 tempcode[0] = OP_ONCE;
6386 *code++ = OP_KET;
6387 PUTINC(code, 0, len);
6388 PUT(tempcode, 1, len);
6389 break;
6390 }
6391 #endif
6392 }
6393
6394 /* In all case we no longer have a previous item. We also set the
6395 "follows varying string" flag for subsequently encountered reqchars if
6396 it isn't already set and we have just passed a varying length item. */
6397
6398 END_REPEAT:
6399 previous = NULL;
6400 cd->req_varyopt |= reqvary;
6401 break;
6402
6403
6404 /* ===================================================================*/
6405 /* Start of nested parenthesized sub-expression, or comment or lookahead or
6406 lookbehind or option setting or condition or all the other extended
6407 parenthesis forms. */
6408
6409 case CHAR_LEFT_PARENTHESIS:
6410 newoptions = options;
6411 skipbytes = 0;
6412 bravalue = OP_CBRA;
6413 save_hwm = cd->hwm;
6414 reset_bracount = FALSE;
6415
6416 /* First deal with various "verbs" that can be introduced by '*'. */
6417
6418 ptr++;
6419 if (ptr[0] == CHAR_ASTERISK && (ptr[1] == ':'
6420 || (MAX_255(ptr[1]) && ((cd->ctypes[ptr[1]] & ctype_letter) != 0))))
6421 {
6422 int i, namelen;
6423 int arglen = 0;
6424 const char *vn = verbnames;
6425 const pcre_uchar *name = ptr + 1;
6426 const pcre_uchar *arg = NULL;
6427 previous = NULL;
6428 ptr++;
6429 while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_letter) != 0) ptr++;
6430 namelen = (int)(ptr - name);
6431
6432 /* It appears that Perl allows any characters whatsoever, other than
6433 a closing parenthesis, to appear in arguments, so we no longer insist on
6434 letters, digits, and underscores. */
6435
6436 if (*ptr == CHAR_COLON)
6437 {
6438 arg = ++ptr;
6439 while (*ptr != CHAR_NULL && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
6440 arglen = (int)(ptr - arg);
6441 if ((unsigned int)arglen > MAX_MARK)
6442 {
6443 *errorcodeptr = ERR75;
6444 goto FAILED;
6445 }
6446 }
6447
6448 if (*ptr != CHAR_RIGHT_PARENTHESIS)
6449 {
6450 *errorcodeptr = ERR60;
6451 goto FAILED;
6452 }
6453
6454 /* Scan the table of verb names */
6455
6456 for (i = 0; i < verbcount; i++)
6457 {
6458 if (namelen == verbs[i].len &&
6459 STRNCMP_UC_C8(name, vn, namelen) == 0)
6460 {
6461 int setverb;
6462
6463 /* Check for open captures before ACCEPT and convert it to
6464 ASSERT_ACCEPT if in an assertion. */
6465
6466 if (verbs[i].op == OP_ACCEPT)
6467 {
6468 open_capitem *oc;
6469 if (arglen != 0)
6470 {
6471 *errorcodeptr = ERR59;
6472 goto FAILED;
6473 }
6474 cd->had_accept = TRUE;
6475 for (oc = cd->open_caps; oc != NULL; oc = oc->next)
6476 {
6477 *code++ = OP_CLOSE;
6478 PUT2INC(code, 0, oc->number);
6479 }
6480 setverb = *code++ =
6481 (cd->assert_depth > 0)? OP_ASSERT_ACCEPT : OP_ACCEPT;
6482
6483 /* Do not set firstchar after *ACCEPT */
6484 if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
6485 }
6486
6487 /* Handle other cases with/without an argument */
6488
6489 else if (arglen == 0)
6490 {
6491 if (verbs[i].op < 0) /* Argument is mandatory */
6492 {
6493 *errorcodeptr = ERR66;
6494 goto FAILED;
6495 }
6496 setverb = *code++ = verbs[i].op;
6497 }
6498
6499 else
6500 {
6501 if (verbs[i].op_arg < 0) /* Argument is forbidden */
6502 {
6503 *errorcodeptr = ERR59;
6504 goto FAILED;
6505 }
6506 setverb = *code++ = verbs[i].op_arg;
6507 *code++ = arglen;
6508 memcpy(code, arg, IN_UCHARS(arglen));
6509 code += arglen;
6510 *code++ = 0;
6511 }
6512
6513 switch (setverb)
6514 {
6515 case OP_THEN:
6516 case OP_THEN_ARG:
6517 cd->external_flags |= PCRE_HASTHEN;
6518 break;
6519
6520 case OP_PRUNE:
6521 case OP_PRUNE_ARG:
6522 case OP_SKIP:
6523 case OP_SKIP_ARG:
6524 cd->had_pruneorskip = TRUE;
6525 break;
6526 }
6527
6528 break; /* Found verb, exit loop */
6529 }
6530
6531 vn += verbs[i].len + 1;
6532 }
6533
6534 if (i < verbcount) continue; /* Successfully handled a verb */
6535 *errorcodeptr = ERR60; /* Verb not recognized */
6536 goto FAILED;
6537 }
6538
6539 /* Deal with the extended parentheses; all are introduced by '?', and the
6540 appearance of any of them means that this is not a capturing group. */
6541
6542 else if (*ptr == CHAR_QUESTION_MARK)
6543 {
6544 int i, set, unset, namelen;
6545 int *optset;
6546 const pcre_uchar *name;
6547 pcre_uchar *slot;
6548
6549 switch (*(++ptr))
6550 {
6551 case CHAR_NUMBER_SIGN: /* Comment; skip to ket */
6552 ptr++;
6553 while (*ptr != CHAR_NULL && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
6554 if (*ptr == CHAR_NULL)
6555 {
6556 *errorcodeptr = ERR18;
6557 goto FAILED;
6558 }
6559 continue;
6560
6561
6562 /* ------------------------------------------------------------ */
6563 case CHAR_VERTICAL_LINE: /* Reset capture count for each branch */
6564 reset_bracount = TRUE;
6565 /* Fall through */
6566
6567 /* ------------------------------------------------------------ */
6568 case CHAR_COLON: /* Non-capturing bracket */
6569 bravalue = OP_BRA;
6570 ptr++;
6571 break;
6572
6573
6574 /* ------------------------------------------------------------ */
6575 case CHAR_LEFT_PARENTHESIS:
6576 bravalue = OP_COND; /* Conditional group */
6577 tempptr = ptr;
6578
6579 /* A condition can be an assertion, a number (referring to a numbered
6580 group's having been set), a name (referring to a named group), or 'R',
6581 referring to recursion. R<digits> and R&name are also permitted for
6582 recursion tests.
6583
6584 There are ways of testing a named group: (?(name)) is used by Python;
6585 Perl 5.10 onwards uses (?(<name>) or (?('name')).
6586
6587 There is one unfortunate ambiguity, caused by history. 'R' can be the
6588 recursive thing or the name 'R' (and similarly for 'R' followed by
6589 digits). We look for a name first; if not found, we try the other case.
6590
6591 For compatibility with auto-callouts, we allow a callout to be
6592 specified before a condition that is an assertion. First, check for the
6593 syntax of a callout; if found, adjust the temporary pointer that is
6594 used to check for an assertion condition. That's all that is needed! */
6595
6596 if (ptr[1] == CHAR_QUESTION_MARK && ptr[2] == CHAR_C)
6597 {
6598 for (i = 3;; i++) if (!IS_DIGIT(ptr[i])) break;
6599 if (ptr[i] == CHAR_RIGHT_PARENTHESIS)
6600 tempptr += i + 1;
6601 }
6602
6603 /* For conditions that are assertions, check the syntax, and then exit
6604 the switch. This will take control down to where bracketed groups,
6605 including assertions, are processed. */
6606
6607 if (tempptr[1] == CHAR_QUESTION_MARK &&
6608 (tempptr[2] == CHAR_EQUALS_SIGN ||
6609 tempptr[2] == CHAR_EXCLAMATION_MARK ||
6610 tempptr[2] == CHAR_LESS_THAN_SIGN))
6611 break;
6612
6613 /* Other conditions use OP_CREF/OP_DNCREF/OP_RREF/OP_DNRREF, and all
6614 need to skip at least 1+IMM2_SIZE bytes at the start of the group. */
6615
6616 code[1+LINK_SIZE] = OP_CREF;
6617 skipbytes = 1+IMM2_SIZE;
6618 refsign = -1; /* => not a number */
6619 namelen = -1; /* => not a name; must set to avoid warning */
6620 name = NULL; /* Always set to avoid warning */
6621 recno = 0; /* Always set to avoid warning */
6622
6623 /* Check for a test for recursion in a named group. */
6624
6625 ptr++;
6626 if (*ptr == CHAR_R && ptr[1] == CHAR_AMPERSAND)
6627 {
6628 terminator = -1;
6629 ptr += 2;
6630 code[1+LINK_SIZE] = OP_RREF; /* Change the type of test */
6631 }
6632
6633 /* Check for a test for a named group's having been set, using the Perl
6634 syntax (?(<name>) or (?('name'), and also allow for the original PCRE
6635 syntax of (?(name) or for (?(+n), (?(-n), and just (?(n). */
6636
6637 else if (*ptr == CHAR_LESS_THAN_SIGN)
6638 {
6639 terminator = CHAR_GREATER_THAN_SIGN;
6640 ptr++;
6641 }
6642 else if (*ptr == CHAR_APOSTROPHE)
6643 {
6644 terminator = CHAR_APOSTROPHE;
6645 ptr++;
6646 }
6647 else
6648 {
6649 terminator = CHAR_NULL;
6650 if (*ptr == CHAR_MINUS || *ptr == CHAR_PLUS) refsign = *ptr++;
6651 else if (IS_DIGIT(*ptr)) refsign = 0;
6652 }
6653
6654 /* Handle a number */
6655
6656 if (refsign >= 0)
6657 {
6658 while (IS_DIGIT(*ptr))
6659 {