/[pcre]/code/trunk/pcre_compile.c
ViewVC logotype

Diff of /code/trunk/pcre_compile.c

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 1070 by chpe, Tue Oct 16 15:54:33 2012 UTC revision 1363 by ph10, Tue Oct 1 16:54:40 2013 UTC
# Line 6  Line 6 
6  and semantics are as close as possible to those of the Perl 5 language.  and semantics are as close as possible to those of the Perl 5 language.
7    
8                         Written by Philip Hazel                         Written by Philip Hazel
9             Copyright (c) 1997-2012 University of Cambridge             Copyright (c) 1997-2013 University of Cambridge
10    
11  -----------------------------------------------------------------------------  -----------------------------------------------------------------------------
12  Redistribution and use in source and binary forms, with or without  Redistribution and use in source and binary forms, with or without
# Line 80  to check them every time. */ Line 80  to check them every time. */
80  /* Definitions to allow mutual recursion */  /* Definitions to allow mutual recursion */
81    
82  static int  static int
83    add_list_to_class(pcre_uint8 *, pcre_uchar **, int, compile_data *,    add_list_to_class(pcre_uint8 *, pcre_uchar **, int, compile_data *,
84      const pcre_uint32 *, unsigned int);      const pcre_uint32 *, unsigned int);
85    
86  static BOOL  static BOOL
87    compile_regex(int, pcre_uchar **, const pcre_uchar **, int *, BOOL, BOOL,    compile_regex(int, pcre_uchar **, const pcre_uchar **, int *, BOOL, BOOL, int, int,
88      int, int, int *, int *, branch_chain *, compile_data *, int *);      pcre_uint32 *, pcre_int32 *, pcre_uint32 *, pcre_int32 *, branch_chain *,
89        compile_data *, int *);
90    
91    
92    
# Line 114  kicks in at the same number of forward r Line 115  kicks in at the same number of forward r
115  #define COMPILE_WORK_SIZE (2048*LINK_SIZE)  #define COMPILE_WORK_SIZE (2048*LINK_SIZE)
116  #define COMPILE_WORK_SIZE_MAX (100*COMPILE_WORK_SIZE)  #define COMPILE_WORK_SIZE_MAX (100*COMPILE_WORK_SIZE)
117    
118    /* This value determines the size of the initial vector that is used for
119    remembering named groups during the pre-compile. It is allocated on the stack,
120    but if it is too small, it is expanded using malloc(), in a similar way to the
121    workspace. The value is the number of slots in the list. */
122    
123    #define NAMED_GROUP_LIST_SIZE  20
124    
125  /* The overrun tests check for a slightly smaller size so that they detect the  /* The overrun tests check for a slightly smaller size so that they detect the
126  overrun before it actually does run off the end of the data block. */  overrun before it actually does run off the end of the data block. */
127    
# Line 121  overrun before it actually does run off Line 129  overrun before it actually does run off
129    
130  /* Private flags added to firstchar and reqchar. */  /* Private flags added to firstchar and reqchar. */
131    
132  #define REQ_CASELESS   0x10000000l      /* Indicates caselessness */  #define REQ_CASELESS    (1 << 0)        /* Indicates caselessness */
133  #define REQ_VARY       0x20000000l      /* Reqchar followed non-literal item */  #define REQ_VARY        (1 << 1)        /* Reqchar followed non-literal item */
134  #define REQ_MASK       (REQ_CASELESS | REQ_VARY)  /* Negative values for the firstchar and reqchar flags */
135    #define REQ_UNSET       (-2)
136    #define REQ_NONE        (-1)
137    
138  /* Repeated character flags. */  /* Repeated character flags. */
139    
# Line 484  static const char error_texts[] = Line 494  static const char error_texts[] =
494    "a numbered reference must not be zero\0"    "a numbered reference must not be zero\0"
495    "an argument is not allowed for (*ACCEPT), (*FAIL), or (*COMMIT)\0"    "an argument is not allowed for (*ACCEPT), (*FAIL), or (*COMMIT)\0"
496    /* 60 */    /* 60 */
497    "(*VERB) not recognized\0"    "(*VERB) not recognized or malformed\0"
498    "number is too big\0"    "number is too big\0"
499    "subpattern name expected\0"    "subpattern name expected\0"
500    "digit expected after (?+\0"    "digit expected after (?+\0"
# Line 505  static const char error_texts[] = Line 515  static const char error_texts[] =
515    "name is too long in (*MARK), (*PRUNE), (*SKIP), or (*THEN)\0"    "name is too long in (*MARK), (*PRUNE), (*SKIP), or (*THEN)\0"
516    "character value in \\u.... sequence is too large\0"    "character value in \\u.... sequence is too large\0"
517    "invalid UTF-32 string\0"    "invalid UTF-32 string\0"
518      "setting UTF is disabled by the application\0"
519    ;    ;
520    
521  /* Table to identify digits and hex digits. This is used when compiling  /* Table to identify digits and hex digits. This is used when compiling
# Line 644  static const pcre_uint8 ebcdic_chartab[] Line 655  static const pcre_uint8 ebcdic_chartab[]
655  #endif  #endif
656    
657    
658    /* This table is used to check whether auto-possessification is possible
659    between adjacent character-type opcodes. The left-hand (repeated) opcode is
660    used to select the row, and the right-hand opcode is use to select the column.
661    A value of 1 means that auto-possessification is OK. For example, the second
662    value in the first row means that \D+\d can be turned into \D++\d.
663    
664    The Unicode property types (\P and \p) have to be present to fill out the table
665    because of what their opcode values are, but the table values should always be
666    zero because property types are handled separately in the code. The last four
667    columns apply to items that cannot be repeated, so there is no need to have
668    rows for them. Note that OP_DIGIT etc. are generated only when PCRE_UCP is
669    *not* set. When it is set, \d etc. are converted into OP_(NOT_)PROP codes. */
670    
671    #define APTROWS (LAST_AUTOTAB_LEFT_OP - FIRST_AUTOTAB_OP + 1)
672    #define APTCOLS (LAST_AUTOTAB_RIGHT_OP - FIRST_AUTOTAB_OP + 1)
673    
674    static const pcre_uint8 autoposstab[APTROWS][APTCOLS] = {
675    /* \D \d \S \s \W \w  . .+ \C \P \p \R \H \h \V \v \X \Z \z  $ $M */
676      { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 },  /* \D */
677      { 1, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 1, 1, 1 },  /* \d */
678      { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 1, 1, 1 },  /* \S */
679      { 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 },  /* \s */
680      { 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 },  /* \W */
681      { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 1, 1, 1 },  /* \w */
682      { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0 },  /* .  */
683      { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 },  /* .+ */
684      { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 },  /* \C */
685      { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },  /* \P */
686      { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },  /* \p */
687      { 0, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0 },  /* \R */
688      { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0 },  /* \H */
689      { 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0, 1, 0, 0 },  /* \h */
690      { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 0, 0 },  /* \V */
691      { 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 1, 0, 0 },  /* \v */
692      { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 }   /* \X */
693    };
694    
695    
696    /* This table is used to check whether auto-possessification is possible
697    between adjacent Unicode property opcodes (OP_PROP and OP_NOTPROP). The
698    left-hand (repeated) opcode is used to select the row, and the right-hand
699    opcode is used to select the column. The values are as follows:
700    
701      0   Always return FALSE (never auto-possessify)
702      1   Character groups are distinct (possessify if both are OP_PROP)
703      2   Check character categories in the same group (general or particular)
704      3   TRUE if the two opcodes are not the same (PROP vs NOTPROP)
705    
706      4   Check left general category vs right particular category
707      5   Check right general category vs left particular category
708    
709      6   Left alphanum vs right general category
710      7   Left space vs right general category
711      8   Left word vs right general category
712    
713      9   Right alphanum vs left general category
714     10   Right space vs left general category
715     11   Right word vs left general category
716    
717     12   Left alphanum vs right particular category
718     13   Left space vs right particular category
719     14   Left word vs right particular category
720    
721     15   Right alphanum vs left particular category
722     16   Right space vs left particular category
723     17   Right word vs left particular category
724    */
725    
726    static const pcre_uint8 propposstab[PT_TABSIZE][PT_TABSIZE] = {
727    /* ANY LAMP GC  PC  SC ALNUM SPACE PXSPACE WORD CLIST UCNC */
728      { 0,  0,  0,  0,  0,    0,    0,      0,   0,    0,   0 },  /* PT_ANY */
729      { 0,  3,  0,  0,  0,    3,    1,      1,   0,    0,   0 },  /* PT_LAMP */
730      { 0,  0,  2,  4,  0,    9,   10,     10,  11,    0,   0 },  /* PT_GC */
731      { 0,  0,  5,  2,  0,   15,   16,     16,  17,    0,   0 },  /* PT_PC */
732      { 0,  0,  0,  0,  2,    0,    0,      0,   0,    0,   0 },  /* PT_SC */
733      { 0,  3,  6, 12,  0,    3,    1,      1,   0,    0,   0 },  /* PT_ALNUM */
734      { 0,  1,  7, 13,  0,    1,    3,      3,   1,    0,   0 },  /* PT_SPACE */
735      { 0,  1,  7, 13,  0,    1,    3,      3,   1,    0,   0 },  /* PT_PXSPACE */
736      { 0,  0,  8, 14,  0,    0,    1,      1,   3,    0,   0 },  /* PT_WORD */
737      { 0,  0,  0,  0,  0,    0,    0,      0,   0,    0,   0 },  /* PT_CLIST */
738      { 0,  0,  0,  0,  0,    0,    0,      0,   0,    0,   3 }   /* PT_UCNC */
739    };
740    
741    /* This table is used to check whether auto-possessification is possible
742    between adjacent Unicode property opcodes (OP_PROP and OP_NOTPROP) when one
743    specifies a general category and the other specifies a particular category. The
744    row is selected by the general category and the column by the particular
745    category. The value is 1 if the particular category is not part of the general
746    category. */
747    
748    static const pcre_uint8 catposstab[7][30] = {
749    /* Cc Cf Cn Co Cs Ll Lm Lo Lt Lu Mc Me Mn Nd Nl No Pc Pd Pe Pf Pi Po Ps Sc Sk Sm So Zl Zp Zs */
750      { 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 },  /* C */
751      { 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 },  /* L */
752      { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 },  /* M */
753      { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 },  /* N */
754      { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1 },  /* P */
755      { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1 },  /* S */
756      { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0 }   /* Z */
757    };
758    
759    /* This table is used when checking ALNUM, (PX)SPACE, SPACE, and WORD against
760    a general or particular category. The properties in each row are those
761    that apply to the character set in question. Duplication means that a little
762    unnecessary work is done when checking, but this keeps things much simpler
763    because they can all use the same code. For more details see the comment where
764    this table is used.
765    
766    Note: SPACE and PXSPACE used to be different because Perl excluded VT from
767    "space", but from Perl 5.18 it's included, so both categories are treated the
768    same here. */
769    
770    static const pcre_uint8 posspropstab[3][4] = {
771      { ucp_L, ucp_N, ucp_N, ucp_Nl },  /* ALNUM, 3rd and 4th values redundant */
772      { ucp_Z, ucp_Z, ucp_C, ucp_Cc },  /* SPACE and PXSPACE, 2nd value redundant */
773      { ucp_L, ucp_N, ucp_P, ucp_Po }   /* WORD */
774    };
775    
776    
777    
778  /*************************************************  /*************************************************
# Line 665  find_error_text(int n) Line 794  find_error_text(int n)
794  const char *s = error_texts;  const char *s = error_texts;
795  for (; n > 0; n--)  for (; n > 0; n--)
796    {    {
797    while (*s++ != 0) {};    while (*s++ != CHAR_NULL) {};
798    if (*s == 0) return "Error text not found (please report)";    if (*s == CHAR_NULL) return "Error text not found (please report)";
799    }    }
800  return s;  return s;
801  }  }
802    
803    
804    
805  /*************************************************  /*************************************************
806  *           Expand the workspace                 *  *           Expand the workspace                 *
807  *************************************************/  *************************************************/
# Line 771  Returns:         zero => a data characte Line 901  Returns:         zero => a data characte
901  */  */
902    
903  static int  static int
904  check_escape(const pcre_uchar **ptrptr, pcre_uint32 *chptr, int *errorcodeptr,  check_escape(const pcre_uchar **ptrptr, pcre_uint32 *chptr, int *errorcodeptr,
905    int bracount, int options, BOOL isclass)    int bracount, int options, BOOL isclass)
906  {  {
907  /* PCRE_UTF16 has the same value as PCRE_UTF8. */  /* PCRE_UTF16 has the same value as PCRE_UTF8. */
# Line 786  ptr--;                            /* Set Line 916  ptr--;                            /* Set
916    
917  /* If backslash is at the end of the pattern, it's an error. */  /* If backslash is at the end of the pattern, it's an error. */
918    
919  if (c == 0) *errorcodeptr = ERR1;  if (c == CHAR_NULL) *errorcodeptr = ERR1;
920    
921  /* Non-alphanumerics are literals. For digits or letters, do an initial lookup  /* Non-alphanumerics are literals. For digits or letters, do an initial lookup
922  in a table. A non-zero result is something that can be returned immediately.  in a table. A non-zero result is something that can be returned immediately.
# Line 795  Otherwise further processing may be requ Line 925  Otherwise further processing may be requ
925  #ifndef EBCDIC  /* ASCII/UTF-8 coding */  #ifndef EBCDIC  /* ASCII/UTF-8 coding */
926  /* Not alphanumeric */  /* Not alphanumeric */
927  else if (c < CHAR_0 || c > CHAR_z) {}  else if (c < CHAR_0 || c > CHAR_z) {}
928  else if ((i = escapes[c - CHAR_0]) != 0) { if (i > 0) c = (pcre_uint32)i; else escape = -i; }  else if ((i = escapes[c - CHAR_0]) != 0)
929      { if (i > 0) c = (pcre_uint32)i; else escape = -i; }
930    
931  #else           /* EBCDIC coding */  #else           /* EBCDIC coding */
932  /* Not alphanumeric */  /* Not alphanumeric */
# Line 845  else Line 976  else
976            }            }
977    
978  #if defined COMPILE_PCRE8  #if defined COMPILE_PCRE8
979          if (c > (utf ? 0x10ffff : 0xff))          if (c > (utf ? 0x10ffffU : 0xffU))
980  #elif defined COMPILE_PCRE16  #elif defined COMPILE_PCRE16
981          if (c > (utf ? 0x10ffff : 0xffff))          if (c > (utf ? 0x10ffffU : 0xffffU))
982  #elif defined COMPILE_PCRE32  #elif defined COMPILE_PCRE32
983          if (utf && c > 0x10ffff)          if (utf && c > 0x10ffffU)
984  #endif  #endif
985            {            {
986            *errorcodeptr = ERR76;            *errorcodeptr = ERR76;
# Line 896  else Line 1027  else
1027      if (ptr[1] == CHAR_LEFT_CURLY_BRACKET)      if (ptr[1] == CHAR_LEFT_CURLY_BRACKET)
1028        {        {
1029        const pcre_uchar *p;        const pcre_uchar *p;
1030        for (p = ptr+2; *p != 0 && *p != CHAR_RIGHT_CURLY_BRACKET; p++)        for (p = ptr+2; *p != CHAR_NULL && *p != CHAR_RIGHT_CURLY_BRACKET; p++)
1031          if (*p != CHAR_MINUS && !IS_DIGIT(*p)) break;          if (*p != CHAR_MINUS && !IS_DIGIT(*p)) break;
1032        if (*p != 0 && *p != CHAR_RIGHT_CURLY_BRACKET)        if (*p != CHAR_NULL && *p != CHAR_RIGHT_CURLY_BRACKET)
1033          {          {
1034          escape = ESC_k;          escape = ESC_k;
1035          break;          break;
# Line 1083  else Line 1214  else
1214  #endif  #endif
1215    
1216  #if defined COMPILE_PCRE8  #if defined COMPILE_PCRE8
1217          if (c > (utf ? 0x10ffff : 0xff)) { overflow = TRUE; break; }          if (c > (utf ? 0x10ffffU : 0xffU)) { overflow = TRUE; break; }
1218  #elif defined COMPILE_PCRE16  #elif defined COMPILE_PCRE16
1219          if (c > (utf ? 0x10ffff : 0xffff)) { overflow = TRUE; break; }          if (c > (utf ? 0x10ffffU : 0xffffU)) { overflow = TRUE; break; }
1220  #elif defined COMPILE_PCRE32  #elif defined COMPILE_PCRE32
1221          if (utf && c > 0x10ffff) { overflow = TRUE; break; }          if (utf && c > 0x10ffffU) { overflow = TRUE; break; }
1222  #endif  #endif
1223          }          }
1224    
# Line 1132  else Line 1263  else
1263    
1264      case CHAR_c:      case CHAR_c:
1265      c = *(++ptr);      c = *(++ptr);
1266      if (c == 0)      if (c == CHAR_NULL)
1267        {        {
1268        *errorcodeptr = ERR2;        *errorcodeptr = ERR2;
1269        break;        break;
# Line 1188  if ((options & PCRE_UCP) != 0 && escape Line 1319  if ((options & PCRE_UCP) != 0 && escape
1319  return escape;  return escape;
1320  }  }
1321    
1322    
1323    
1324  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
1325  /*************************************************  /*************************************************
1326  *               Handle \P and \p                 *  *               Handle \P and \p                 *
# Line 1201  escape sequence. Line 1334  escape sequence.
1334  Argument:  Argument:
1335    ptrptr         points to the pattern position pointer    ptrptr         points to the pattern position pointer
1336    negptr         points to a boolean that is set TRUE for negation else FALSE    negptr         points to a boolean that is set TRUE for negation else FALSE
1337    dptr           points to an int that is set to the detailed property value    ptypeptr       points to an unsigned int that is set to the type value
1338      pdataptr       points to an unsigned int that is set to the detailed property value
1339    errorcodeptr   points to the error code variable    errorcodeptr   points to the error code variable
1340    
1341  Returns:         type value from ucp_type_table, or -1 for an invalid type  Returns:         TRUE if the type value was found, or FALSE for an invalid type
1342  */  */
1343    
1344  static int  static BOOL
1345  get_ucp(const pcre_uchar **ptrptr, BOOL *negptr, int *dptr, int *errorcodeptr)  get_ucp(const pcre_uchar **ptrptr, BOOL *negptr, unsigned int *ptypeptr,
1346      unsigned int *pdataptr, int *errorcodeptr)
1347  {  {
1348  pcre_uchar c;  pcre_uchar c;
1349  int i, bot, top;  int i, bot, top;
# Line 1216  const pcre_uchar *ptr = *ptrptr; Line 1351  const pcre_uchar *ptr = *ptrptr;
1351  pcre_uchar name[32];  pcre_uchar name[32];
1352    
1353  c = *(++ptr);  c = *(++ptr);
1354  if (c == 0) goto ERROR_RETURN;  if (c == CHAR_NULL) goto ERROR_RETURN;
1355    
1356  *negptr = FALSE;  *negptr = FALSE;
1357    
# Line 1233  if (c == CHAR_LEFT_CURLY_BRACKET) Line 1368  if (c == CHAR_LEFT_CURLY_BRACKET)
1368    for (i = 0; i < (int)(sizeof(name) / sizeof(pcre_uchar)) - 1; i++)    for (i = 0; i < (int)(sizeof(name) / sizeof(pcre_uchar)) - 1; i++)
1369      {      {
1370      c = *(++ptr);      c = *(++ptr);
1371      if (c == 0) goto ERROR_RETURN;      if (c == CHAR_NULL) goto ERROR_RETURN;
1372      if (c == CHAR_RIGHT_CURLY_BRACKET) break;      if (c == CHAR_RIGHT_CURLY_BRACKET) break;
1373      name[i] = c;      name[i] = c;
1374      }      }
# Line 1263  while (bot < top) Line 1398  while (bot < top)
1398    r = STRCMP_UC_C8(name, PRIV(utt_names) + PRIV(utt)[i].name_offset);    r = STRCMP_UC_C8(name, PRIV(utt_names) + PRIV(utt)[i].name_offset);
1399    if (r == 0)    if (r == 0)
1400      {      {
1401      *dptr = PRIV(utt)[i].value;      *ptypeptr = PRIV(utt)[i].type;
1402      return PRIV(utt)[i].type;      *pdataptr = PRIV(utt)[i].value;
1403        return TRUE;
1404      }      }
1405    if (r > 0) bot = i + 1; else top = i;    if (r > 0) bot = i + 1; else top = i;
1406    }    }
1407    
1408  *errorcodeptr = ERR47;  *errorcodeptr = ERR47;
1409  *ptrptr = ptr;  *ptrptr = ptr;
1410  return -1;  return FALSE;
1411    
1412  ERROR_RETURN:  ERROR_RETURN:
1413  *errorcodeptr = ERR46;  *errorcodeptr = ERR46;
1414  *ptrptr = ptr;  *ptrptr = ptr;
1415  return -1;  return FALSE;
1416  }  }
1417  #endif  #endif
1418    
1419    
1420    
   
1421  /*************************************************  /*************************************************
1422  *         Read repeat counts                     *  *         Read repeat counts                     *
1423  *************************************************/  *************************************************/
# Line 1351  return p; Line 1486  return p;
1486    
1487    
1488  /*************************************************  /*************************************************
 *  Subroutine for finding forward reference      *  
 *************************************************/  
   
 /* This recursive function is called only from find_parens() below. The  
 top-level call starts at the beginning of the pattern. All other calls must  
 start at a parenthesis. It scans along a pattern's text looking for capturing  
 subpatterns, and counting them. If it finds a named pattern that matches the  
 name it is given, it returns its number. Alternatively, if the name is NULL, it  
 returns when it reaches a given numbered subpattern. Recursion is used to keep  
 track of subpatterns that reset the capturing group numbers - the (?| feature.  
   
 This function was originally called only from the second pass, in which we know  
 that if (?< or (?' or (?P< is encountered, the name will be correctly  
 terminated because that is checked in the first pass. There is now one call to  
 this function in the first pass, to check for a recursive back reference by  
 name (so that we can make the whole group atomic). In this case, we need check  
 only up to the current position in the pattern, and that is still OK because  
 and previous occurrences will have been checked. To make this work, the test  
 for "end of pattern" is a check against cd->end_pattern in the main loop,  
 instead of looking for a binary zero. This means that the special first-pass  
 call can adjust cd->end_pattern temporarily. (Checks for binary zero while  
 processing items within the loop are OK, because afterwards the main loop will  
 terminate.)  
   
 Arguments:  
   ptrptr       address of the current character pointer (updated)  
   cd           compile background data  
   name         name to seek, or NULL if seeking a numbered subpattern  
   lorn         name length, or subpattern number if name is NULL  
   xmode        TRUE if we are in /x mode  
   utf          TRUE if we are in UTF-8 / UTF-16 / UTF-32 mode  
   count        pointer to the current capturing subpattern number (updated)  
   
 Returns:       the number of the named subpattern, or -1 if not found  
 */  
   
 static int  
 find_parens_sub(pcre_uchar **ptrptr, compile_data *cd, const pcre_uchar *name, int lorn,  
   BOOL xmode, BOOL utf, int *count)  
 {  
 pcre_uchar *ptr = *ptrptr;  
 int start_count = *count;  
 int hwm_count = start_count;  
 BOOL dup_parens = FALSE;  
   
 /* If the first character is a parenthesis, check on the type of group we are  
 dealing with. The very first call may not start with a parenthesis. */  
   
 if (ptr[0] == CHAR_LEFT_PARENTHESIS)  
   {  
   /* Handle specials such as (*SKIP) or (*UTF8) etc. */  
   
   if (ptr[1] == CHAR_ASTERISK) ptr += 2;  
   
   /* Handle a normal, unnamed capturing parenthesis. */  
   
   else if (ptr[1] != CHAR_QUESTION_MARK)  
     {  
     *count += 1;  
     if (name == NULL && *count == lorn) return *count;  
     ptr++;  
     }  
   
   /* All cases now have (? at the start. Remember when we are in a group  
   where the parenthesis numbers are duplicated. */  
   
   else if (ptr[2] == CHAR_VERTICAL_LINE)  
     {  
     ptr += 3;  
     dup_parens = TRUE;  
     }  
   
   /* Handle comments; all characters are allowed until a ket is reached. */  
   
   else if (ptr[2] == CHAR_NUMBER_SIGN)  
     {  
     for (ptr += 3; *ptr != 0; ptr++) if (*ptr == CHAR_RIGHT_PARENTHESIS) break;  
     goto FAIL_EXIT;  
     }  
   
   /* Handle a condition. If it is an assertion, just carry on so that it  
   is processed as normal. If not, skip to the closing parenthesis of the  
   condition (there can't be any nested parens). */  
   
   else if (ptr[2] == CHAR_LEFT_PARENTHESIS)  
     {  
     ptr += 2;  
     if (ptr[1] != CHAR_QUESTION_MARK)  
       {  
       while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;  
       if (*ptr != 0) ptr++;  
       }  
     }  
   
   /* Start with (? but not a condition. */  
   
   else  
     {  
     ptr += 2;  
     if (*ptr == CHAR_P) ptr++;                      /* Allow optional P */  
   
     /* We have to disambiguate (?<! and (?<= from (?<name> for named groups */  
   
     if ((*ptr == CHAR_LESS_THAN_SIGN && ptr[1] != CHAR_EXCLAMATION_MARK &&  
         ptr[1] != CHAR_EQUALS_SIGN) || *ptr == CHAR_APOSTROPHE)  
       {  
       pcre_uchar term;  
       const pcre_uchar *thisname;  
       *count += 1;  
       if (name == NULL && *count == lorn) return *count;  
       term = *ptr++;  
       if (term == CHAR_LESS_THAN_SIGN) term = CHAR_GREATER_THAN_SIGN;  
       thisname = ptr;  
       while (*ptr != term) ptr++;  
       if (name != NULL && lorn == (int)(ptr - thisname) &&  
           STRNCMP_UC_UC(name, thisname, (unsigned int)lorn) == 0)  
         return *count;  
       term++;  
       }  
     }  
   }  
   
 /* Past any initial parenthesis handling, scan for parentheses or vertical  
 bars. Stop if we get to cd->end_pattern. Note that this is important for the  
 first-pass call when this value is temporarily adjusted to stop at the current  
 position. So DO NOT change this to a test for binary zero. */  
   
 for (; ptr < cd->end_pattern; ptr++)  
   {  
   /* Skip over backslashed characters and also entire \Q...\E */  
   
   if (*ptr == CHAR_BACKSLASH)  
     {  
     if (*(++ptr) == 0) goto FAIL_EXIT;  
     if (*ptr == CHAR_Q) for (;;)  
       {  
       while (*(++ptr) != 0 && *ptr != CHAR_BACKSLASH) {};  
       if (*ptr == 0) goto FAIL_EXIT;  
       if (*(++ptr) == CHAR_E) break;  
       }  
     continue;  
     }  
   
   /* Skip over character classes; this logic must be similar to the way they  
   are handled for real. If the first character is '^', skip it. Also, if the  
   first few characters (either before or after ^) are \Q\E or \E we skip them  
   too. This makes for compatibility with Perl. Note the use of STR macros to  
   encode "Q\\E" so that it works in UTF-8 on EBCDIC platforms. */  
   
   if (*ptr == CHAR_LEFT_SQUARE_BRACKET)  
     {  
     BOOL negate_class = FALSE;  
     for (;;)  
       {  
       if (ptr[1] == CHAR_BACKSLASH)  
         {  
         if (ptr[2] == CHAR_E)  
           ptr+= 2;  
         else if (STRNCMP_UC_C8(ptr + 2,  
                  STR_Q STR_BACKSLASH STR_E, 3) == 0)  
           ptr += 4;  
         else  
           break;  
         }  
       else if (!negate_class && ptr[1] == CHAR_CIRCUMFLEX_ACCENT)  
         {  
         negate_class = TRUE;  
         ptr++;  
         }  
       else break;  
       }  
   
     /* If the next character is ']', it is a data character that must be  
     skipped, except in JavaScript compatibility mode. */  
   
     if (ptr[1] == CHAR_RIGHT_SQUARE_BRACKET &&  
         (cd->external_options & PCRE_JAVASCRIPT_COMPAT) == 0)  
       ptr++;  
   
     while (*(++ptr) != CHAR_RIGHT_SQUARE_BRACKET)  
       {  
       if (*ptr == 0) return -1;  
       if (*ptr == CHAR_BACKSLASH)  
         {  
         if (*(++ptr) == 0) goto FAIL_EXIT;  
         if (*ptr == CHAR_Q) for (;;)  
           {  
           while (*(++ptr) != 0 && *ptr != CHAR_BACKSLASH) {};  
           if (*ptr == 0) goto FAIL_EXIT;  
           if (*(++ptr) == CHAR_E) break;  
           }  
         continue;  
         }  
       }  
     continue;  
     }  
   
   /* Skip comments in /x mode */  
   
   if (xmode && *ptr == CHAR_NUMBER_SIGN)  
     {  
     ptr++;  
     while (*ptr != 0)  
       {  
       if (IS_NEWLINE(ptr)) { ptr += cd->nllen - 1; break; }  
       ptr++;  
 #ifdef SUPPORT_UTF  
       if (utf) FORWARDCHAR(ptr);  
 #endif  
       }  
     if (*ptr == 0) goto FAIL_EXIT;  
     continue;  
     }  
   
   /* Check for the special metacharacters */  
   
   if (*ptr == CHAR_LEFT_PARENTHESIS)  
     {  
     int rc = find_parens_sub(&ptr, cd, name, lorn, xmode, utf, count);  
     if (rc > 0) return rc;  
     if (*ptr == 0) goto FAIL_EXIT;  
     }  
   
   else if (*ptr == CHAR_RIGHT_PARENTHESIS)  
     {  
     if (dup_parens && *count < hwm_count) *count = hwm_count;  
     goto FAIL_EXIT;  
     }  
   
   else if (*ptr == CHAR_VERTICAL_LINE && dup_parens)  
     {  
     if (*count > hwm_count) hwm_count = *count;  
     *count = start_count;  
     }  
   }  
   
 FAIL_EXIT:  
 *ptrptr = ptr;  
 return -1;  
 }  
   
   
   
   
 /*************************************************  
 *       Find forward referenced subpattern       *  
 *************************************************/  
   
 /* This function scans along a pattern's text looking for capturing  
 subpatterns, and counting them. If it finds a named pattern that matches the  
 name it is given, it returns its number. Alternatively, if the name is NULL, it  
 returns when it reaches a given numbered subpattern. This is used for forward  
 references to subpatterns. We used to be able to start this scan from the  
 current compiling point, using the current count value from cd->bracount, and  
 do it all in a single loop, but the addition of the possibility of duplicate  
 subpattern numbers means that we have to scan from the very start, in order to  
 take account of such duplicates, and to use a recursive function to keep track  
 of the different types of group.  
   
 Arguments:  
   cd           compile background data  
   name         name to seek, or NULL if seeking a numbered subpattern  
   lorn         name length, or subpattern number if name is NULL  
   xmode        TRUE if we are in /x mode  
   utf          TRUE if we are in UTF-8 / UTF-16 / UTF-32 mode  
   
 Returns:       the number of the found subpattern, or -1 if not found  
 */  
   
 static int  
 find_parens(compile_data *cd, const pcre_uchar *name, int lorn, BOOL xmode,  
   BOOL utf)  
 {  
 pcre_uchar *ptr = (pcre_uchar *)cd->start_pattern;  
 int count = 0;  
 int rc;  
   
 /* If the pattern does not start with an opening parenthesis, the first call  
 to find_parens_sub() will scan right to the end (if necessary). However, if it  
 does start with a parenthesis, find_parens_sub() will return when it hits the  
 matching closing parens. That is why we have to have a loop. */  
   
 for (;;)  
   {  
   rc = find_parens_sub(&ptr, cd, name, lorn, xmode, utf, &count);  
   if (rc > 0 || *ptr++ == 0) break;  
   }  
   
 return rc;  
 }  
   
   
   
   
 /*************************************************  
1489  *      Find first significant op code            *  *      Find first significant op code            *
1490  *************************************************/  *************************************************/
1491    
# Line 1700  for (;;) Line 1540  for (;;)
1540    
1541    
1542    
   
1543  /*************************************************  /*************************************************
1544  *        Find the fixed length of a branch       *  *        Find the fixed length of a branch       *
1545  *************************************************/  *************************************************/
# Line 1852  for (;;) Line 1691  for (;;)
1691      case OP_NOTI:      case OP_NOTI:
1692      branchlength++;      branchlength++;
1693      cc += 2;      cc += 2;
1694  #if defined SUPPORT_UTF && !defined COMPILE_PCRE32  #ifdef SUPPORT_UTF
1695      if (utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]);      if (utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]);
1696  #endif  #endif
1697      break;      break;
# Line 1866  for (;;) Line 1705  for (;;)
1705      case OP_NOTEXACTI:      case OP_NOTEXACTI:
1706      branchlength += (int)GET2(cc,1);      branchlength += (int)GET2(cc,1);
1707      cc += 2 + IMM2_SIZE;      cc += 2 + IMM2_SIZE;
1708  #if defined SUPPORT_UTF && !defined COMPILE_PCRE32  #ifdef SUPPORT_UTF
1709      if (utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]);      if (utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]);
1710  #endif  #endif
1711      break;      break;
1712    
1713      case OP_TYPEEXACT:      case OP_TYPEEXACT:
1714      branchlength += GET2(cc,1);      branchlength += GET2(cc,1);
1715      if (cc[1 + IMM2_SIZE] == OP_PROP || cc[1 + IMM2_SIZE] == OP_NOTPROP)      if (cc[1 + IMM2_SIZE] == OP_PROP || cc[1 + IMM2_SIZE] == OP_NOTPROP)
1716        cc += 2;        cc += 2;
1717      cc += 1 + IMM2_SIZE + 1;      cc += 1 + IMM2_SIZE + 1;
1718      break;      break;
# Line 1909  for (;;) Line 1748  for (;;)
1748    
1749      /* Check a class for variable quantification */      /* Check a class for variable quantification */
1750    
 #if defined SUPPORT_UTF || defined COMPILE_PCRE16 || defined COMPILE_PCRE32  
     case OP_XCLASS:  
     cc += GET(cc, 1) - PRIV(OP_lengths)[OP_CLASS];  
     /* Fall through */  
 #endif  
   
1751      case OP_CLASS:      case OP_CLASS:
1752      case OP_NCLASS:      case OP_NCLASS:
1753    #if defined SUPPORT_UTF || defined COMPILE_PCRE16 || defined COMPILE_PCRE32
1754        case OP_XCLASS:
1755        /* The original code caused an unsigned overflow in 64 bit systems,
1756        so now we use a conditional statement. */
1757        if (op == OP_XCLASS)
1758          cc += GET(cc, 1);
1759        else
1760          cc += PRIV(OP_lengths)[OP_CLASS];
1761    #else
1762      cc += PRIV(OP_lengths)[OP_CLASS];      cc += PRIV(OP_lengths)[OP_CLASS];
1763    #endif
1764    
1765      switch (*cc)      switch (*cc)
1766        {        {
# Line 1999  for (;;) Line 1842  for (;;)
1842      case OP_QUERYI:      case OP_QUERYI:
1843      case OP_REF:      case OP_REF:
1844      case OP_REFI:      case OP_REFI:
1845        case OP_DNREF:
1846        case OP_DNREFI:
1847      case OP_SBRA:      case OP_SBRA:
1848      case OP_SBRAPOS:      case OP_SBRAPOS:
1849      case OP_SCBRA:      case OP_SCBRA:
# Line 2035  for (;;) Line 1880  for (;;)
1880    
1881    
1882    
   
1883  /*************************************************  /*************************************************
1884  *    Scan compiled regex for specific bracket    *  *    Scan compiled regex for specific bracket    *
1885  *************************************************/  *************************************************/
# Line 2112  for (;;) Line 1956  for (;;)
1956        case OP_TYPEMINUPTO:        case OP_TYPEMINUPTO:
1957        case OP_TYPEEXACT:        case OP_TYPEEXACT:
1958        case OP_TYPEPOSUPTO:        case OP_TYPEPOSUPTO:
1959        if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP)        if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP)
1960          code += 2;          code += 2;
1961        break;        break;
1962    
1963        case OP_MARK:        case OP_MARK:
1964        case OP_PRUNE_ARG:        case OP_PRUNE_ARG:
1965        case OP_SKIP_ARG:        case OP_SKIP_ARG:
       code += code[1];  
       break;  
   
1966        case OP_THEN_ARG:        case OP_THEN_ARG:
1967        code += code[1];        code += code[1];
1968        break;        break;
# Line 2232  for (;;) Line 2073  for (;;)
2073        case OP_TYPEUPTO:        case OP_TYPEUPTO:
2074        case OP_TYPEMINUPTO:        case OP_TYPEMINUPTO:
2075        case OP_TYPEEXACT:        case OP_TYPEEXACT:
2076        if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP)        if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP)
2077          code += 2;          code += 2;
2078        break;        break;
2079    
2080        case OP_MARK:        case OP_MARK:
2081        case OP_PRUNE_ARG:        case OP_PRUNE_ARG:
2082        case OP_SKIP_ARG:        case OP_SKIP_ARG:
       code += code[1];  
       break;  
   
2083        case OP_THEN_ARG:        case OP_THEN_ARG:
2084        code += code[1];        code += code[1];
2085        break;        break;
# Line 2343  Arguments: Line 2181  Arguments:
2181    endcode     points to where to stop    endcode     points to where to stop
2182    utf         TRUE if in UTF-8 / UTF-16 / UTF-32 mode    utf         TRUE if in UTF-8 / UTF-16 / UTF-32 mode
2183    cd          contains pointers to tables etc.    cd          contains pointers to tables etc.
2184      recurses    chain of recurse_check to catch mutual recursion
2185    
2186  Returns:      TRUE if what is matched could be empty  Returns:      TRUE if what is matched could be empty
2187  */  */
2188    
2189    typedef struct recurse_check {
2190      struct recurse_check *prev;
2191      const pcre_uchar *group;
2192    } recurse_check;
2193    
2194  static BOOL  static BOOL
2195  could_be_empty_branch(const pcre_uchar *code, const pcre_uchar *endcode,  could_be_empty_branch(const pcre_uchar *code, const pcre_uchar *endcode,
2196    BOOL utf, compile_data *cd)    BOOL utf, compile_data *cd, recurse_check *recurses)
2197  {  {
2198  register int c;  register pcre_uchar c;
2199    recurse_check this_recurse;
2200    
2201  for (code = first_significant_code(code + PRIV(OP_lengths)[*code], TRUE);  for (code = first_significant_code(code + PRIV(OP_lengths)[*code], TRUE);
2202       code < endcode;       code < endcode;
2203       code = first_significant_code(code + PRIV(OP_lengths)[c], TRUE))       code = first_significant_code(code + PRIV(OP_lengths)[c], TRUE))
# Line 2379  for (code = first_significant_code(code Line 2225  for (code = first_significant_code(code
2225    
2226    if (c == OP_RECURSE)    if (c == OP_RECURSE)
2227      {      {
2228      const pcre_uchar *scode;      const pcre_uchar *scode = cd->start_code + GET(code, 1);
2229      BOOL empty_branch;      BOOL empty_branch;
2230    
2231      /* Test for forward reference */      /* Test for forward reference or uncompleted reference. This is disabled
2232        when called to scan a completed pattern by setting cd->start_workspace to
2233        NULL. */
2234    
2235        if (cd->start_workspace != NULL)
2236          {
2237          const pcre_uchar *tcode;
2238          for (tcode = cd->start_workspace; tcode < cd->hwm; tcode += LINK_SIZE)
2239            if ((int)GET(tcode, 0) == (int)(code + 1 - cd->start_code)) return TRUE;
2240          if (GET(scode, 1) == 0) return TRUE;    /* Unclosed */
2241          }
2242    
2243        /* If we are scanning a completed pattern, there are no forward references
2244        and all groups are complete. We need to detect whether this is a recursive
2245        call, as otherwise there will be an infinite loop. If it is a recursion,
2246        just skip over it. Simple recursions are easily detected. For mutual
2247        recursions we keep a chain on the stack. */
2248    
2249        else
2250          {
2251          recurse_check *r = recurses;
2252          const pcre_uchar *endgroup = scode;
2253    
2254          do endgroup += GET(endgroup, 1); while (*endgroup == OP_ALT);
2255          if (code >= scode && code <= endgroup) continue;  /* Simple recursion */
2256    
2257      for (scode = cd->start_workspace; scode < cd->hwm; scode += LINK_SIZE)        for (r = recurses; r != NULL; r = r->prev)
2258        if (GET(scode, 0) == code + 1 - cd->start_code) return TRUE;          if (r->group == scode) break;
2259          if (r != NULL) continue;   /* Mutual recursion */
2260          }
2261    
2262      /* Not a forward reference, test for completed backward reference */      /* Completed reference; scan the referenced group, remembering it on the
2263        stack chain to detect mutual recursions. */
2264    
2265      empty_branch = FALSE;      empty_branch = FALSE;
2266      scode = cd->start_code + GET(code, 1);      this_recurse.prev = recurses;
2267      if (GET(scode, 1) == 0) return TRUE;    /* Unclosed */      this_recurse.group = scode;
   
     /* Completed backwards reference */  
2268    
2269      do      do
2270        {        {
2271        if (could_be_empty_branch(scode, endcode, utf, cd))        if (could_be_empty_branch(scode, endcode, utf, cd, &this_recurse))
2272          {          {
2273          empty_branch = TRUE;          empty_branch = TRUE;
2274          break;          break;
# Line 2453  for (code = first_significant_code(code Line 2324  for (code = first_significant_code(code
2324        empty_branch = FALSE;        empty_branch = FALSE;
2325        do        do
2326          {          {
2327          if (!empty_branch && could_be_empty_branch(code, endcode, utf, cd))          if (!empty_branch && could_be_empty_branch(code, endcode, utf, cd, NULL))
2328            empty_branch = TRUE;            empty_branch = TRUE;
2329          code += GET(code, 1);          code += GET(code, 1);
2330          }          }
# Line 2511  for (code = first_significant_code(code Line 2382  for (code = first_significant_code(code
2382    
2383      /* Opcodes that must match a character */      /* Opcodes that must match a character */
2384    
2385        case OP_ANY:
2386        case OP_ALLANY:
2387        case OP_ANYBYTE:
2388    
2389      case OP_PROP:      case OP_PROP:
2390      case OP_NOTPROP:      case OP_NOTPROP:
2391        case OP_ANYNL:
2392    
2393        case OP_NOT_HSPACE:
2394        case OP_HSPACE:
2395        case OP_NOT_VSPACE:
2396        case OP_VSPACE:
2397      case OP_EXTUNI:      case OP_EXTUNI:
2398    
2399      case OP_NOT_DIGIT:      case OP_NOT_DIGIT:
2400      case OP_DIGIT:      case OP_DIGIT:
2401      case OP_NOT_WHITESPACE:      case OP_NOT_WHITESPACE:
2402      case OP_WHITESPACE:      case OP_WHITESPACE:
2403      case OP_NOT_WORDCHAR:      case OP_NOT_WORDCHAR:
2404      case OP_WORDCHAR:      case OP_WORDCHAR:
2405      case OP_ANY:  
     case OP_ALLANY:  
     case OP_ANYBYTE:  
2406      case OP_CHAR:      case OP_CHAR:
2407      case OP_CHARI:      case OP_CHARI:
2408      case OP_NOT:      case OP_NOT:
2409      case OP_NOTI:      case OP_NOTI:
2410    
2411      case OP_PLUS:      case OP_PLUS:
2412        case OP_PLUSI:
2413      case OP_MINPLUS:      case OP_MINPLUS:
2414      case OP_POSPLUS:      case OP_MINPLUSI:
2415      case OP_EXACT:  
2416      case OP_NOTPLUS:      case OP_NOTPLUS:
2417        case OP_NOTPLUSI:
2418      case OP_NOTMINPLUS:      case OP_NOTMINPLUS:
2419        case OP_NOTMINPLUSI:
2420    
2421        case OP_POSPLUS:
2422        case OP_POSPLUSI:
2423      case OP_NOTPOSPLUS:      case OP_NOTPOSPLUS:
2424        case OP_NOTPOSPLUSI:
2425    
2426        case OP_EXACT:
2427        case OP_EXACTI:
2428      case OP_NOTEXACT:      case OP_NOTEXACT:
2429        case OP_NOTEXACTI:
2430    
2431      case OP_TYPEPLUS:      case OP_TYPEPLUS:
2432      case OP_TYPEMINPLUS:      case OP_TYPEMINPLUS:
2433      case OP_TYPEPOSPLUS:      case OP_TYPEPOSPLUS:
2434      case OP_TYPEEXACT:      case OP_TYPEEXACT:
2435    
2436      return FALSE;      return FALSE;
2437    
2438      /* These are going to continue, as they may be empty, but we have to      /* These are going to continue, as they may be empty, but we have to
# Line 2558  for (code = first_significant_code(code Line 2452  for (code = first_significant_code(code
2452      case OP_TYPEUPTO:      case OP_TYPEUPTO:
2453      case OP_TYPEMINUPTO:      case OP_TYPEMINUPTO:
2454      case OP_TYPEPOSUPTO:      case OP_TYPEPOSUPTO:
2455      if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP)      if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP)
2456        code += 2;        code += 2;
2457      break;      break;
2458    
# Line 2572  for (code = first_significant_code(code Line 2466  for (code = first_significant_code(code
2466      return TRUE;      return TRUE;
2467    
2468      /* In UTF-8 mode, STAR, MINSTAR, POSSTAR, QUERY, MINQUERY, POSQUERY, UPTO,      /* In UTF-8 mode, STAR, MINSTAR, POSSTAR, QUERY, MINQUERY, POSQUERY, UPTO,
2469      MINUPTO, and POSUPTO may be followed by a multibyte character */      MINUPTO, and POSUPTO and their caseless and negative versions may be
2470        followed by a multibyte character. */
2471    
2472  #if defined SUPPORT_UTF && !defined COMPILE_PCRE32  #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
2473      case OP_STAR:      case OP_STAR:
2474      case OP_STARI:      case OP_STARI:
2475        case OP_NOTSTAR:
2476        case OP_NOTSTARI:
2477    
2478      case OP_MINSTAR:      case OP_MINSTAR:
2479      case OP_MINSTARI:      case OP_MINSTARI:
2480        case OP_NOTMINSTAR:
2481        case OP_NOTMINSTARI:
2482    
2483      case OP_POSSTAR:      case OP_POSSTAR:
2484      case OP_POSSTARI:      case OP_POSSTARI:
2485        case OP_NOTPOSSTAR:
2486        case OP_NOTPOSSTARI:
2487    
2488      case OP_QUERY:      case OP_QUERY:
2489      case OP_QUERYI:      case OP_QUERYI:
2490        case OP_NOTQUERY:
2491        case OP_NOTQUERYI:
2492    
2493      case OP_MINQUERY:      case OP_MINQUERY:
2494      case OP_MINQUERYI:      case OP_MINQUERYI:
2495        case OP_NOTMINQUERY:
2496        case OP_NOTMINQUERYI:
2497    
2498      case OP_POSQUERY:      case OP_POSQUERY:
2499      case OP_POSQUERYI:      case OP_POSQUERYI:
2500        case OP_NOTPOSQUERY:
2501        case OP_NOTPOSQUERYI:
2502    
2503      if (utf && HAS_EXTRALEN(code[1])) code += GET_EXTRALEN(code[1]);      if (utf && HAS_EXTRALEN(code[1])) code += GET_EXTRALEN(code[1]);
2504      break;      break;
2505    
2506      case OP_UPTO:      case OP_UPTO:
2507      case OP_UPTOI:      case OP_UPTOI:
2508        case OP_NOTUPTO:
2509        case OP_NOTUPTOI:
2510    
2511      case OP_MINUPTO:      case OP_MINUPTO:
2512      case OP_MINUPTOI:      case OP_MINUPTOI:
2513        case OP_NOTMINUPTO:
2514        case OP_NOTMINUPTOI:
2515    
2516      case OP_POSUPTO:      case OP_POSUPTO:
2517      case OP_POSUPTOI:      case OP_POSUPTOI:
2518        case OP_NOTPOSUPTO:
2519        case OP_NOTPOSUPTOI:
2520    
2521      if (utf && HAS_EXTRALEN(code[1 + IMM2_SIZE])) code += GET_EXTRALEN(code[1 + IMM2_SIZE]);      if (utf && HAS_EXTRALEN(code[1 + IMM2_SIZE])) code += GET_EXTRALEN(code[1 + IMM2_SIZE]);
2522      break;      break;
2523  #endif  #endif
# Line 2606  for (code = first_significant_code(code Line 2528  for (code = first_significant_code(code
2528      case OP_MARK:      case OP_MARK:
2529      case OP_PRUNE_ARG:      case OP_PRUNE_ARG:
2530      case OP_SKIP_ARG:      case OP_SKIP_ARG:
     code += code[1];  
     break;  
   
2531      case OP_THEN_ARG:      case OP_THEN_ARG:
2532      code += code[1];      code += code[1];
2533      break;      break;
# Line 2652  could_be_empty(const pcre_uchar *code, c Line 2571  could_be_empty(const pcre_uchar *code, c
2571  {  {
2572  while (bcptr != NULL && bcptr->current_branch >= code)  while (bcptr != NULL && bcptr->current_branch >= code)
2573    {    {
2574    if (!could_be_empty_branch(bcptr->current_branch, endcode, utf, cd))    if (!could_be_empty_branch(bcptr->current_branch, endcode, utf, cd, NULL))
2575      return FALSE;      return FALSE;
2576    bcptr = bcptr->outer;    bcptr = bcptr->outer;
2577    }    }
# Line 2662  return TRUE; Line 2581  return TRUE;
2581    
2582    
2583  /*************************************************  /*************************************************
2584  *           Check for POSIX class syntax         *  *        Base opcode of repeated opcodes         *
2585  *************************************************/  *************************************************/
2586    
2587  /* This function is called when the sequence "[:" or "[." or "[=" is  /* Returns the base opcode for repeated single character type opcodes. If the
2588  encountered in a character class. It checks whether this is followed by a  opcode is not a repeated character type, it returns with the original value.
 sequence of characters terminated by a matching ":]" or ".]" or "=]". If we  
 reach an unescaped ']' without the special preceding character, return FALSE.  
2589    
2590  Originally, this function only recognized a sequence of letters between the  Arguments:  c opcode
2591  terminators, but it seems that Perl recognizes any sequence of characters,  Returns:    base opcode for the type
 though of course unknown POSIX names are subsequently rejected. Perl gives an  
 "Unknown POSIX class" error for [:f\oo:] for example, where previously PCRE  
 didn't consider this to be a POSIX class. Likewise for [:1234:].  
   
 The problem in trying to be exactly like Perl is in the handling of escapes. We  
 have to be sure that [abc[:x\]pqr] is *not* treated as containing a POSIX  
 class, but [abc[:x\]pqr:]] is (so that an error can be generated). The code  
 below handles the special case of \], but does not try to do any other escape  
 processing. This makes it different from Perl for cases such as [:l\ower:]  
 where Perl recognizes it as the POSIX class "lower" but PCRE does not recognize  
 "l\ower". This is a lesser evil that not diagnosing bad classes when Perl does,  
 I think.  
   
 A user pointed out that PCRE was rejecting [:a[:digit:]] whereas Perl was not.  
 It seems that the appearance of a nested POSIX class supersedes an apparent  
 external class. For example, [:a[:digit:]b:] matches "a", "b", ":", or  
 a digit.  
   
 In Perl, unescaped square brackets may also appear as part of class names. For  
 example, [:a[:abc]b:] gives unknown POSIX class "[:abc]b:]". However, for  
 [:a[:abc]b][b:] it gives unknown POSIX class "[:abc]b][b:]", which does not  
 seem right at all. PCRE does not allow closing square brackets in POSIX class  
 names.  
   
 Arguments:  
   ptr      pointer to the initial [  
   endptr   where to return the end pointer  
   
 Returns:   TRUE or FALSE  
 */  
   
 static BOOL  
 check_posix_syntax(const pcre_uchar *ptr, const pcre_uchar **endptr)  
 {  
 int terminator;          /* Don't combine these lines; the Solaris cc */  
 terminator = *(++ptr);   /* compiler warns about "non-constant" initializer. */  
 for (++ptr; *ptr != 0; ptr++)  
   {  
   if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)  
     ptr++;  
   else if (*ptr == CHAR_RIGHT_SQUARE_BRACKET) return FALSE;  
   else  
     {  
     if (*ptr == terminator && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)  
       {  
       *endptr = ptr;  
       return TRUE;  
       }  
     if (*ptr == CHAR_LEFT_SQUARE_BRACKET &&  
          (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||  
           ptr[1] == CHAR_EQUALS_SIGN) &&  
         check_posix_syntax(ptr, endptr))  
       return FALSE;  
     }  
   }  
 return FALSE;  
 }  
   
   
   
   
 /*************************************************  
 *          Check POSIX class name                *  
 *************************************************/  
   
 /* This function is called to check the name given in a POSIX-style class entry  
 such as [:alnum:].  
   
 Arguments:  
   ptr        points to the first letter  
   len        the length of the name  
   
 Returns:     a value representing the name, or -1 if unknown  
 */  
   
 static int  
 check_posix_name(const pcre_uchar *ptr, int len)  
 {  
 const char *pn = posix_names;  
 register int yield = 0;  
 while (posix_name_lengths[yield] != 0)  
   {  
   if (len == posix_name_lengths[yield] &&  
     STRNCMP_UC_C8(ptr, pn, len) == 0) return yield;  
   pn += posix_name_lengths[yield] + 1;  
   yield++;  
   }  
 return -1;  
 }  
   
   
 /*************************************************  
 *    Adjust OP_RECURSE items in repeated group   *  
 *************************************************/  
   
 /* OP_RECURSE items contain an offset from the start of the regex to the group  
 that is referenced. This means that groups can be replicated for fixed  
 repetition simply by copying (because the recursion is allowed to refer to  
 earlier groups that are outside the current group). However, when a group is  
 optional (i.e. the minimum quantifier is zero), OP_BRAZERO or OP_SKIPZERO is  
 inserted before it, after it has been compiled. This means that any OP_RECURSE  
 items within it that refer to the group itself or any contained groups have to  
 have their offsets adjusted. That one of the jobs of this function. Before it  
 is called, the partially compiled regex must be temporarily terminated with  
 OP_END.  
   
 This function has been extended with the possibility of forward references for  
 recursions and subroutine calls. It must also check the list of such references  
 for the group we are dealing with. If it finds that one of the recursions in  
 the current group is on this list, it adjusts the offset in the list, not the  
 value in the reference (which is a group number).  
   
 Arguments:  
   group      points to the start of the group  
   adjust     the amount by which the group is to be moved  
   utf        TRUE in UTF-8 / UTF-16 / UTF-32 mode  
   cd         contains pointers to tables etc.  
   save_hwm   the hwm forward reference pointer at the start of the group  
   
 Returns:     nothing  
 */  
   
 static void  
 adjust_recurse(pcre_uchar *group, int adjust, BOOL utf, compile_data *cd,  
   pcre_uchar *save_hwm)  
 {  
 pcre_uchar *ptr = group;  
   
 while ((ptr = (pcre_uchar *)find_recurse(ptr, utf)) != NULL)  
   {  
   int offset;  
   pcre_uchar *hc;  
   
   /* See if this recursion is on the forward reference list. If so, adjust the  
   reference. */  
   
   for (hc = save_hwm; hc < cd->hwm; hc += LINK_SIZE)  
     {  
     offset = GET(hc, 0);  
     if (cd->start_code + offset == ptr + 1)  
       {  
       PUT(hc, 0, offset + adjust);  
       break;  
       }  
     }  
   
   /* Otherwise, adjust the recursion offset if it's after the start of this  
   group. */  
   
   if (hc >= cd->hwm)  
     {  
     offset = GET(ptr, 1);  
     if (cd->start_code + offset >= group) PUT(ptr, 1, offset + adjust);  
     }  
   
   ptr += 1 + LINK_SIZE;  
   }  
 }  
   
   
   
 /*************************************************  
 *        Insert an automatic callout point       *  
 *************************************************/  
   
 /* This function is called when the PCRE_AUTO_CALLOUT option is set, to insert  
 callout points before each pattern item.  
   
 Arguments:  
   code           current code pointer  
   ptr            current pattern pointer  
   cd             pointers to tables etc  
   
 Returns:         new code pointer  
 */  
   
 static pcre_uchar *  
 auto_callout(pcre_uchar *code, const pcre_uchar *ptr, compile_data *cd)  
 {  
 *code++ = OP_CALLOUT;  
 *code++ = 255;  
 PUT(code, 0, (int)(ptr - cd->start_pattern));  /* Pattern offset */  
 PUT(code, LINK_SIZE, 0);                       /* Default length */  
 return code + 2 * LINK_SIZE;  
 }  
   
   
   
 /*************************************************  
 *         Complete a callout item                *  
 *************************************************/  
   
 /* A callout item contains the length of the next item in the pattern, which  
 we can't fill in till after we have reached the relevant point. This is used  
 for both automatic and manual callouts.  
   
 Arguments:  
   previous_callout   points to previous callout item  
   ptr                current pattern pointer  
   cd                 pointers to tables etc  
   
 Returns:             nothing  
2592  */  */
2593    
2594  static void  static pcre_uchar
2595  complete_callout(pcre_uchar *previous_callout, const pcre_uchar *ptr, compile_data *cd)  get_repeat_base(pcre_uchar c)
2596  {  {
2597  int length = (int)(ptr - cd->start_pattern - GET(previous_callout, 2));  return (c > OP_TYPEPOSUPTO)? c :
2598  PUT(previous_callout, 2 + LINK_SIZE, length);         (c >= OP_TYPESTAR)?   OP_TYPESTAR :
2599           (c >= OP_NOTSTARI)?   OP_NOTSTARI :
2600           (c >= OP_NOTSTAR)?    OP_NOTSTAR :
2601           (c >= OP_STARI)?      OP_STARI :
2602                                 OP_STAR;
2603  }  }
2604    
2605    
2606    
2607  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
2608  /*************************************************  /*************************************************
 *           Get othercase range                  *  
 *************************************************/  
   
 /* This function is passed the start and end of a class range, in UTF-8 mode  
 with UCP support. It searches up the characters, looking for ranges of  
 characters in the "other" case. Each call returns the next one, updating the  
 start address. A character with multiple other cases is returned on its own  
 with a special return value.  
   
 Arguments:  
   cptr        points to starting character value; updated  
   d           end value  
   ocptr       where to put start of othercase range  
   odptr       where to put end of othercase range  
   
 Yield:        -1 when no more  
                0 when a range is returned  
               >0 the CASESET offset for char with multiple other cases  
                 in this case, ocptr contains the original  
 */  
   
 static int  
 get_othercase_range(pcre_uint32 *cptr, pcre_uint32 d, pcre_uint32 *ocptr,  
   pcre_uint32 *odptr)  
 {  
 pcre_uint32 c, othercase, next;  
 int co;  
   
 /* Find the first character that has an other case. If it has multiple other  
 cases, return its case offset value. */  
   
 for (c = *cptr; c <= d; c++)  
   {  
   if ((co = UCD_CASESET(c)) != 0)  
     {  
     *ocptr = c++;   /* Character that has the set */  
     *cptr = c;      /* Rest of input range */  
     return co;  
     }  
   if ((othercase = UCD_OTHERCASE(c)) != c) break;  
   }  
   
 if (c > d) return -1;  /* Reached end of range */  
   
 *ocptr = othercase;  
 next = othercase + 1;  
   
 for (++c; c <= d; c++)  
   {  
   if (UCD_OTHERCASE(c) != next) break;  
   next++;  
   }  
   
 *odptr = next - 1;     /* End of othercase range */  
 *cptr = c;             /* Rest of input range */  
 return 0;  
 }  
   
   
   
 /*************************************************  
2609  *        Check a character and a property        *  *        Check a character and a property        *
2610  *************************************************/  *************************************************/
2611    
# Line 2964  Returns:       TRUE if auto-possessifyin Line 2622  Returns:       TRUE if auto-possessifyin
2622  */  */
2623    
2624  static BOOL  static BOOL
2625  check_char_prop(pcre_uint32 c, int ptype, int pdata, BOOL negated)  check_char_prop(pcre_uint32 c, unsigned int ptype, unsigned int pdata,
2626      BOOL negated)
2627  {  {
 #ifdef SUPPORT_UCP  
2628  const pcre_uint32 *p;  const pcre_uint32 *p;
 #endif  
   
2629  const ucd_record *prop = GET_UCD(c);  const ucd_record *prop = GET_UCD(c);
2630    
2631  switch(ptype)  switch(ptype)
# Line 3009  switch(ptype) Line 2665  switch(ptype)
2665    return (PRIV(ucp_gentype)[prop->chartype] == ucp_L ||    return (PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
2666            PRIV(ucp_gentype)[prop->chartype] == ucp_N ||            PRIV(ucp_gentype)[prop->chartype] == ucp_N ||
2667            c == CHAR_UNDERSCORE) == negated;            c == CHAR_UNDERSCORE) == negated;
2668    
 #ifdef SUPPORT_UCP  
2669    case PT_CLIST:    case PT_CLIST:
2670    p = PRIV(ucd_caseless_sets) + prop->caseset;    p = PRIV(ucd_caseless_sets) + prop->caseset;
2671    for (;;)    for (;;)
2672      {      {
2673      if ((unsigned int)c < *p) return !negated;      if (c < *p) return !negated;
2674      if ((unsigned int)c == *p++) return negated;      if (c == *p++) return negated;
2675      }      }
2676    break;  /* Control never reaches here */    break;  /* Control never reaches here */
 #endif  
2677    }    }
2678    
2679  return FALSE;  return FALSE;
# Line 3029  return FALSE; Line 2683  return FALSE;
2683    
2684    
2685  /*************************************************  /*************************************************
2686  *     Check if auto-possessifying is possible    *  *        Fill the character property list        *
2687  *************************************************/  *************************************************/
2688    
2689  /* This function is called for unlimited repeats of certain items, to see  /* Checks whether the code points to an opcode that can take part in auto-
2690  whether the next thing could possibly match the repeated item. If not, it makes  possessification, and if so, fills a list with its properties.
 sense to automatically possessify the repeated item.  
2691    
2692  Arguments:  Arguments:
2693    previous      pointer to the repeated opcode    code        points to start of expression
2694    utf           TRUE in UTF-8 / UTF-16 / UTF-32 mode    utf         TRUE if in UTF-8 / UTF-16 / UTF-32 mode
2695    ptr           next character in pattern    fcc         points to case-flipping table
2696    options       options bits    list        points to output list
2697    cd            contains pointers to tables etc.                list[0] will be filled with the opcode
2698                  list[1] will be non-zero if this opcode
2699                    can match an empty character string
2700                  list[2..7] depends on the opcode
2701    
2702  Returns:        TRUE if possessifying is wanted  Returns:      points to the start of the next opcode if *code is accepted
2703                  NULL if *code is not accepted
2704  */  */
2705    
2706  static BOOL  static const pcre_uchar *
2707  check_auto_possessive(const pcre_uchar *previous, BOOL utf,  get_chr_property_list(const pcre_uchar *code, BOOL utf,
2708    const pcre_uchar *ptr, int options, compile_data *cd)    const pcre_uint8 *fcc, pcre_uint32 *list)
2709  {  {
2710  pcre_uint32 c = NOTACHAR;  pcre_uchar c = *code;
2711  pcre_uint32 next;  const pcre_uchar *end;
2712  int escape;  const pcre_uint32 *clist_src;
2713  int op_code = *previous++;  pcre_uint32 *clist_dest;
2714    pcre_uint32 chr;
2715    pcre_uchar base;
2716    
2717  /* Skip whitespace and comments in extended mode */  list[0] = c;
2718    list[1] = FALSE;
2719    code++;
2720    
2721  if ((options & PCRE_EXTENDED) != 0)  if (c >= OP_STAR && c <= OP_TYPEPOSUPTO)
2722    {    {
2723    for (;;)    base = get_repeat_base(c);
2724      c -= (base - OP_STAR);
2725    
2726      if (c == OP_UPTO || c == OP_MINUPTO || c == OP_EXACT || c == OP_POSUPTO)
2727        code += IMM2_SIZE;
2728    
2729      list[1] = (c != OP_PLUS && c != OP_MINPLUS && c != OP_EXACT && c != OP_POSPLUS);
2730    
2731      switch(base)
2732      {      {
2733      while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_space) != 0) ptr++;      case OP_STAR:
2734      if (*ptr == CHAR_NUMBER_SIGN)      list[0] = OP_CHAR;
2735        {      break;
2736        ptr++;  
2737        while (*ptr != 0)      case OP_STARI:
2738          {      list[0] = OP_CHARI;
2739          if (IS_NEWLINE(ptr)) { ptr += cd->nllen; break; }      break;
         ptr++;  
 #ifdef SUPPORT_UTF  
         if (utf) FORWARDCHAR(ptr);  
 #endif  
         }  
       }  
     else break;  
     }  
   }  
2740    
2741  /* If the next item is one that we can handle, get its value. A non-negative      case OP_NOTSTAR:
2742  value is a character, a negative value is an escape value. */      list[0] = OP_NOT;
2743        break;
2744    
2745  if (*ptr == CHAR_BACKSLASH)      case OP_NOTSTARI:
2746    {      list[0] = OP_NOTI;
2747    int temperrorcode = 0;      break;
2748    escape = check_escape(&ptr, &next, &temperrorcode, cd->bracount, options, FALSE);  
2749    if (temperrorcode != 0) return FALSE;      case OP_TYPESTAR:
2750    ptr++;    /* Point after the escape sequence */      list[0] = *code;
2751        code++;
2752        break;
2753        }
2754      c = list[0];
2755    }    }
2756  else if (!MAX_255(*ptr) || (cd->ctypes[*ptr] & ctype_meta) == 0)  
2757    switch(c)
2758    {    {
2759    escape = 0;    case OP_NOT_DIGIT:
2760  #ifdef SUPPORT_UTF    case OP_DIGIT:
2761    if (utf) { GETCHARINC(next, ptr); } else    case OP_NOT_WHITESPACE:
2762      case OP_WHITESPACE:
2763      case OP_NOT_WORDCHAR:
2764      case OP_WORDCHAR:
2765      case OP_ANY:
2766      case OP_ALLANY:
2767      case OP_ANYNL:
2768      case OP_NOT_HSPACE:
2769      case OP_HSPACE:
2770      case OP_NOT_VSPACE:
2771      case OP_VSPACE:
2772      case OP_EXTUNI:
2773      case OP_EODN:
2774      case OP_EOD:
2775      case OP_DOLL:
2776      case OP_DOLLM:
2777      return code;
2778    
2779      case OP_CHAR:
2780      case OP_NOT:
2781      GETCHARINCTEST(chr, code);
2782      list[2] = chr;
2783      list[3] = NOTACHAR;
2784      return code;
2785    
2786      case OP_CHARI:
2787      case OP_NOTI:
2788      list[0] = (c == OP_CHARI) ? OP_CHAR : OP_NOT;
2789      GETCHARINCTEST(chr, code);
2790      list[2] = chr;
2791    
2792    #ifdef SUPPORT_UCP
2793      if (chr < 128 || (chr < 256 && !utf))
2794        list[3] = fcc[chr];
2795      else
2796        list[3] = UCD_OTHERCASE(chr);
2797    #elif defined SUPPORT_UTF || !defined COMPILE_PCRE8
2798      list[3] = (chr < 256) ? fcc[chr] : chr;
2799    #else
2800      list[3] = fcc[chr];
2801  #endif  #endif
2802    next = *ptr++;  
2803      /* The othercase might be the same value. */
2804    
2805      if (chr == list[3])
2806        list[3] = NOTACHAR;
2807      else
2808        list[4] = NOTACHAR;
2809      return code;
2810    
2811    #ifdef SUPPORT_UCP
2812      case OP_PROP:
2813      case OP_NOTPROP:
2814      if (code[0] != PT_CLIST)
2815        {
2816        list[2] = code[0];
2817        list[3] = code[1];
2818        return code + 2;
2819        }
2820    
2821      /* Convert only if we have anough space. */
2822    
2823      clist_src = PRIV(ucd_caseless_sets) + code[1];
2824      clist_dest = list + 2;
2825      code += 2;
2826    
2827      do {
2828         /* Early return if there is not enough space. */
2829         if (clist_dest >= list + 8)
2830           {
2831           list[2] = code[0];
2832           list[3] = code[1];
2833           return code;
2834           }
2835         *clist_dest++ = *clist_src;
2836         }
2837       while(*clist_src++ != NOTACHAR);
2838    
2839      /* Enough space to store all characters. */
2840    
2841      list[0] = (c == OP_PROP) ? OP_CHAR : OP_NOT;
2842      return code;
2843    #endif
2844    
2845      case OP_NCLASS:
2846      case OP_CLASS:
2847    #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
2848      case OP_XCLASS:
2849    
2850      if (c == OP_XCLASS)
2851        end = code + GET(code, 0);
2852      else
2853    #endif
2854        end = code + 32 / sizeof(pcre_uchar);
2855    
2856      switch(*end)
2857        {
2858        case OP_CRSTAR:
2859        case OP_CRMINSTAR:
2860        case OP_CRQUERY:
2861        case OP_CRMINQUERY:
2862        list[1] = TRUE;
2863        end++;
2864        break;
2865    
2866        case OP_CRRANGE:
2867        case OP_CRMINRANGE:
2868        list[1] = (GET2(end, 1) == 0);
2869        end += 1 + 2 * IMM2_SIZE;
2870        break;
2871        }
2872      list[2] = end - code;
2873      return end;
2874    }    }
2875  else return FALSE;  return NULL;    /* Opcode not accepted */
2876    }
2877    
2878    
2879    
2880    /*************************************************
2881    *    Scan further character sets for match       *
2882    *************************************************/
2883    
2884    /* Checks whether the base and the current opcode have a common character, in
2885    which case the base cannot be possessified.
2886    
2887    Arguments:
2888      code        points to the byte code
2889      utf         TRUE in UTF-8 / UTF-16 / UTF-32 mode
2890      cd          static compile data
2891      base_list   the data list of the base opcode
2892    
2893  /* Skip whitespace and comments in extended mode */  Returns:      TRUE if the auto-possessification is possible
2894    */
2895    
2896  if ((options & PCRE_EXTENDED) != 0)  static BOOL
2897    compare_opcodes(const pcre_uchar *code, BOOL utf, const compile_data *cd,
2898      const pcre_uint32* base_list)
2899    {
2900    pcre_uchar c;
2901    pcre_uint32 list[8];
2902    const pcre_uint32* chr_ptr;
2903    const pcre_uint32* ochr_ptr;
2904    const pcre_uint32* list_ptr;
2905    pcre_uint32 chr;
2906    
2907    for(;;)
2908    {    {
2909    for (;;)    c = *code;
2910    
2911      /* Skip over callouts */
2912    
2913      if (c == OP_CALLOUT)
2914      {      {
2915      while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_space) != 0) ptr++;      code += PRIV(OP_lengths)[c];
2916      if (*ptr == CHAR_NUMBER_SIGN)      continue;
2917        }
2918    
2919      if (c == OP_ALT)
2920        {
2921        do code += GET(code, 1); while (*code == OP_ALT);
2922        c = *code;
2923        }
2924    
2925      switch(c)
2926        {
2927        case OP_END:
2928        /* TRUE only in greedy case. The non-greedy case could be replaced by an
2929        OP_EXACT, but it is probably not worth it. (And note that OP_EXACT uses
2930        more memory, which we cannot get at this stage.) */
2931    
2932        return base_list[1] != 0;
2933    
2934        case OP_KET:
2935        /* If the bracket is capturing, and referenced by an OP_RECURSE, the
2936        non-greedy case cannot be converted to a possessive form. We do not test
2937        the bracket type at the moment, but we might do it in the future to improve
2938        this condition. (But note that recursive calls are always atomic.) */
2939    
2940        if (base_list[1] == 0) return FALSE;
2941        code += PRIV(OP_lengths)[c];
2942        continue;
2943        }
2944    
2945      /* Check for a supported opcode, and load its properties. */
2946    
2947      code = get_chr_property_list(code, utf, cd->fcc, list);
2948      if (code == NULL) return FALSE;    /* Unsupported */
2949    
2950      /* If either opcode is a small character list, set pointers for comparing
2951      characters from that list with another list, or with a property. */
2952    
2953      if (base_list[0] == OP_CHAR)
2954        {
2955        chr_ptr = base_list + 2;
2956        list_ptr = list;
2957        }
2958      else if (list[0] == OP_CHAR)
2959        {
2960        chr_ptr = list + 2;
2961        list_ptr = base_list;
2962        }
2963    
2964      /* Some property combinations also acceptable. Unicode property opcodes are
2965      processed specially; the rest can be handled with a lookup table. */
2966    
2967      else
2968        {
2969        pcre_uint32 leftop, rightop;
2970    
2971        if (list[1] != 0) return FALSE;   /* Must match at least one character */
2972        leftop = base_list[0];
2973        rightop = list[0];
2974    
2975    #ifdef SUPPORT_UCP
2976        if (leftop == OP_PROP || leftop == OP_NOTPROP)
2977        {        {
2978        ptr++;        if (rightop == OP_EOD) return TRUE;
2979        while (*ptr != 0)        if (rightop == OP_PROP || rightop == OP_NOTPROP)
2980          {          {
2981          if (IS_NEWLINE(ptr)) { ptr += cd->nllen; break; }          int n;
2982          ptr++;          const pcre_uint8 *p;
2983  #ifdef SUPPORT_UTF          BOOL same = leftop == rightop;
2984          if (utf) FORWARDCHAR(ptr);          BOOL lisprop = leftop == OP_PROP;
2985  #endif          BOOL risprop = rightop == OP_PROP;
2986            BOOL bothprop = lisprop && risprop;
2987    
2988            /* There's a table that specifies how each combination is to be
2989            processed:
2990              0   Always return FALSE (never auto-possessify)
2991              1   Character groups are distinct (possessify if both are OP_PROP)
2992              2   Check character categories in the same group (general or particular)
2993              3   Return TRUE if the two opcodes are not the same
2994              ... see comments below
2995            */
2996    
2997            n = propposstab[base_list[2]][list[2]];
2998            switch(n)
2999              {
3000              case 0: return FALSE;
3001              case 1: return bothprop;
3002              case 2: return (base_list[3] == list[3]) != same;
3003              case 3: return !same;
3004    
3005              case 4:  /* Left general category, right particular category */
3006              return risprop && catposstab[base_list[3]][list[3]] == same;
3007    
3008              case 5:  /* Right general category, left particular category */
3009              return lisprop && catposstab[list[3]][base_list[3]] == same;
3010    
3011              /* This code is logically tricky. Think hard before fiddling with it.
3012              The posspropstab table has four entries per row. Each row relates to
3013              one of PCRE's special properties such as ALNUM or SPACE or WORD.
3014              Only WORD actually needs all four entries, but using repeats for the
3015              others means they can all use the same code below.
3016    
3017              The first two entries in each row are Unicode general categories, and
3018              apply always, because all the characters they include are part of the
3019              PCRE character set. The third and fourth entries are a general and a
3020              particular category, respectively, that include one or more relevant
3021              characters. One or the other is used, depending on whether the check
3022              is for a general or a particular category. However, in both cases the
3023              category contains more characters than the specials that are defined
3024              for the property being tested against. Therefore, it cannot be used
3025              in a NOTPROP case.
3026    
3027              Example: the row for WORD contains ucp_L, ucp_N, ucp_P, ucp_Po.
3028              Underscore is covered by ucp_P or ucp_Po. */
3029    
3030              case 6:  /* Left alphanum vs right general category */
3031              case 7:  /* Left space vs right general category */
3032              case 8:  /* Left word vs right general category */
3033              p = posspropstab[n-6];
3034              return risprop && lisprop ==
3035                (list[3] != p[0] &&
3036                 list[3] != p[1] &&
3037                (list[3] != p[2] || !lisprop));
3038    
3039              case 9:   /* Right alphanum vs left general category */
3040              case 10:  /* Right space vs left general category */
3041              case 11:  /* Right word vs left general category */
3042              p = posspropstab[n-9];
3043              return lisprop && risprop ==
3044                (base_list[3] != p[0] &&
3045                 base_list[3] != p[1] &&
3046                (base_list[3] != p[2] || !risprop));
3047    
3048              case 12:  /* Left alphanum vs right particular category */
3049              case 13:  /* Left space vs right particular category */
3050              case 14:  /* Left word vs right particular category */
3051              p = posspropstab[n-12];
3052              return risprop && lisprop ==
3053                (catposstab[p[0]][list[3]] &&
3054                 catposstab[p[1]][list[3]] &&
3055                (list[3] != p[3] || !lisprop));
3056    
3057              case 15:  /* Right alphanum vs left particular category */
3058              case 16:  /* Right space vs left particular category */
3059              case 17:  /* Right word vs left particular category */
3060              p = posspropstab[n-15];
3061              return lisprop && risprop ==
3062                (catposstab[p[0]][base_list[3]] &&
3063                 catposstab[p[1]][base_list[3]] &&
3064                (base_list[3] != p[3] || !risprop));
3065              }
3066          }          }
3067          return FALSE;
3068        }        }
3069      else break;  
3070        else
3071    #endif  /* SUPPORT_UCP */
3072    
3073        return leftop >= FIRST_AUTOTAB_OP && leftop <= LAST_AUTOTAB_LEFT_OP &&
3074               rightop >= FIRST_AUTOTAB_OP && rightop <= LAST_AUTOTAB_RIGHT_OP &&
3075               autoposstab[leftop - FIRST_AUTOTAB_OP][rightop - FIRST_AUTOTAB_OP];
3076      }      }
   }  
3077    
3078  /* If the next thing is itself optional, we have to give up. */    /* Control reaches here only if one of the items is a small character list.
3079      All characters are checked against the other side. */
3080    
3081  if (*ptr == CHAR_ASTERISK || *ptr == CHAR_QUESTION_MARK ||    do
3082    STRNCMP_UC_C8(ptr, STR_LEFT_CURLY_BRACKET STR_0 STR_COMMA, 3) == 0)      {
3083      return FALSE;      chr = *chr_ptr;
3084    
3085        switch(list_ptr[0])
3086          {
3087          case OP_CHAR:
3088          ochr_ptr = list_ptr + 2;
3089          do
3090            {
3091            if (chr == *ochr_ptr) return FALSE;
3092            ochr_ptr++;
3093            }
3094          while(*ochr_ptr != NOTACHAR);
3095          break;
3096    
3097          case OP_NOT:
3098          ochr_ptr = list_ptr + 2;
3099          do
3100            {
3101            if (chr == *ochr_ptr)
3102              break;
3103            ochr_ptr++;
3104            }
3105          while(*ochr_ptr != NOTACHAR);
3106          if (*ochr_ptr == NOTACHAR) return FALSE;   /* Not found */
3107          break;
3108    
3109  /* If the previous item is a character, get its value. */        /* Note that OP_DIGIT etc. are generated only when PCRE_UCP is *not*
3110          set. When it is set, \d etc. are converted into OP_(NOT_)PROP codes. */
3111    
3112  if (op_code == OP_CHAR || op_code == OP_CHARI ||        case OP_DIGIT:
3113      op_code == OP_NOT || op_code == OP_NOTI)        if (chr < 256 && (cd->ctypes[chr] & ctype_digit) != 0) return FALSE;
3114    //if (escape == 0) switch(op_code)        break;
3115    {  
3116  #ifdef SUPPORT_UTF        case OP_NOT_DIGIT:
3117    GETCHARTEST(c, previous);        if (chr > 255 || (cd->ctypes[chr] & ctype_digit) == 0) return FALSE;
3118  #else        break;
3119    c = *previous;  
3120          case OP_WHITESPACE:
3121          if (chr < 256 && (cd->ctypes[chr] & ctype_space) != 0) return FALSE;
3122          break;
3123    
3124          case OP_NOT_WHITESPACE:
3125          if (chr > 255 || (cd->ctypes[chr] & ctype_space) == 0) return FALSE;
3126          break;
3127    
3128          case OP_WORDCHAR:
3129          if (chr < 255 && (cd->ctypes[chr] & ctype_word) != 0) return FALSE;
3130          break;
3131    
3132          case OP_NOT_WORDCHAR:
3133          if (chr > 255 || (cd->ctypes[chr] & ctype_word) == 0) return FALSE;
3134          break;
3135    
3136          case OP_HSPACE:
3137          switch(chr)
3138            {
3139            HSPACE_CASES: return FALSE;
3140            default: break;
3141            }
3142          break;
3143    
3144          case OP_NOT_HSPACE:
3145          switch(chr)
3146            {
3147            HSPACE_CASES: break;
3148            default: return FALSE;
3149            }
3150          break;
3151    
3152          case OP_ANYNL:
3153          case OP_VSPACE:
3154          switch(chr)
3155            {
3156            VSPACE_CASES: return FALSE;
3157            default: break;
3158            }
3159          break;
3160    
3161          case OP_NOT_VSPACE:
3162          switch(chr)
3163            {
3164            VSPACE_CASES: break;
3165            default: return FALSE;
3166            }
3167          break;
3168    
3169          case OP_DOLL:
3170          case OP_EODN:
3171          switch (chr)
3172            {
3173            case CHAR_CR:
3174            case CHAR_LF:
3175            case CHAR_VT:
3176            case CHAR_FF:
3177            case CHAR_NEL:
3178    #ifndef EBCDIC
3179            case 0x2028:
3180            case 0x2029:
3181    #endif  /* Not EBCDIC */
3182            return FALSE;
3183            }
3184          break;
3185    
3186          case OP_EOD:    /* Can always possessify before \z */
3187          break;
3188    
3189          case OP_PROP:
3190          case OP_NOTPROP:
3191          if (!check_char_prop(chr, list_ptr[2], list_ptr[3],
3192                list_ptr[0] == OP_NOTPROP))
3193            return FALSE;
3194          break;
3195    
3196          /* The class comparisons work only when the class is the second item
3197          of the pair, because there are at present no possessive forms of the
3198          class opcodes. Note also that the "code" variable that is used below
3199          points after the second item, and that the pointer for the first item
3200          is not available, so even if there were possessive forms of the class
3201          opcodes, the correct comparison could not be done. */
3202    
3203          case OP_NCLASS:
3204          if (chr > 255) return FALSE;
3205          /* Fall through */
3206    
3207          case OP_CLASS:
3208          if (list_ptr != list) return FALSE;   /* Class is first opcode */
3209          if (chr > 255) break;
3210          if ((((pcre_uint8 *)(code - list_ptr[2] + 1))[chr >> 3] & (1 << (chr & 7))) != 0)
3211            return FALSE;
3212          break;
3213    
3214    #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
3215          case OP_XCLASS:
3216          if (list_ptr != list) return FALSE;   /* Class is first opcode */
3217          if (PRIV(xclass)(chr, code - list_ptr[2] + 1 + LINK_SIZE, utf))
3218            return FALSE;
3219          break;
3220  #endif  #endif
3221    
3222          default:
3223          return FALSE;
3224          }
3225    
3226        chr_ptr++;
3227        }
3228      while(*chr_ptr != NOTACHAR);
3229    
3230      /* At least one character must be matched from this opcode. */
3231    
3232      if (list[1] == 0) return TRUE;
3233    }    }
3234    
3235  /* Now compare the next item with the previous opcode. First, handle cases when  return FALSE;
3236  the next item is a character. */  }
3237    
3238    
3239    
3240    /*************************************************
3241    *    Scan compiled regex for auto-possession     *
3242    *************************************************/
3243    
3244    /* Replaces single character iterations with their possessive alternatives
3245    if appropriate. This function modifies the compiled opcode!
3246    
3247    Arguments:
3248      code        points to start of the byte code
3249      utf         TRUE in UTF-8 / UTF-16 / UTF-32 mode
3250      cd          static compile data
3251    
3252    Returns:      nothing
3253    */
3254    
3255    static void
3256    auto_possessify(pcre_uchar *code, BOOL utf, const compile_data *cd)
3257    {
3258    register pcre_uchar c;
3259    const pcre_uchar *end;
3260    pcre_uint32 list[8];
3261    
3262  if (escape == 0)  for (;;)
3263    {    {
3264    /* For a caseless UTF match, the next character may have more than one other    c = *code;
3265    case, which maps to the special PT_CLIST property. Check this first. */  
3266      if (c >= OP_STAR && c <= OP_TYPEPOSUPTO)
 #ifdef SUPPORT_UCP  
   if (utf && c != NOTACHAR && (options & PCRE_CASELESS) != 0)  
3267      {      {
3268      int ocs = UCD_CASESET(next);      c -= get_repeat_base(c) - OP_STAR;
3269      if (ocs > 0) return check_char_prop(c, PT_CLIST, ocs, op_code >= OP_NOT);      end = (c <= OP_MINUPTO) ?
3270          get_chr_property_list(code, utf, cd->fcc, list) : NULL;
3271        list[1] = c == OP_STAR || c == OP_PLUS || c == OP_QUERY || c == OP_UPTO;
3272    
3273        if (end != NULL && compare_opcodes(end, utf, cd, list))
3274          {
3275          switch(c)
3276            {
3277            case OP_STAR:
3278            *code += OP_POSSTAR - OP_STAR;
3279            break;
3280    
3281            case OP_MINSTAR:
3282            *code += OP_POSSTAR - OP_MINSTAR;
3283            break;
3284    
3285            case OP_PLUS:
3286            *code += OP_POSPLUS - OP_PLUS;
3287            break;
3288    
3289            case OP_MINPLUS:
3290            *code += OP_POSPLUS - OP_MINPLUS;
3291            break;
3292    
3293            case OP_QUERY:
3294            *code += OP_POSQUERY - OP_QUERY;
3295            break;
3296    
3297            case OP_MINQUERY:
3298            *code += OP_POSQUERY - OP_MINQUERY;
3299            break;
3300    
3301            case OP_UPTO:
3302            *code += OP_POSUPTO - OP_UPTO;
3303            break;
3304    
3305            case OP_MINUPTO:
3306            *code += OP_MINUPTO - OP_UPTO;
3307            break;
3308            }
3309          }
3310        c = *code;
3311      }      }
 #endif  
3312    
3313    switch(op_code)    switch(c)
3314      {      {
3315      case OP_CHAR:      case OP_END:
3316      return c != next;      return;
3317    
3318      /* For CHARI (caseless character) we must check the other case. If we have      case OP_TYPESTAR:
3319      Unicode property support, we can use it to test the other case of      case OP_TYPEMINSTAR:
3320      high-valued characters. We know that next can have only one other case,      case OP_TYPEPLUS:
3321      because multi-other-case characters are dealt with above. */      case OP_TYPEMINPLUS:
3322        case OP_TYPEQUERY:
3323        case OP_TYPEMINQUERY:
3324        case OP_TYPEPOSSTAR:
3325        case OP_TYPEPOSPLUS:
3326        case OP_TYPEPOSQUERY:
3327        if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
3328        break;
3329    
3330        case OP_TYPEUPTO:
3331        case OP_TYPEMINUPTO:
3332        case OP_TYPEEXACT:
3333        case OP_TYPEPOSUPTO:
3334        if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP)
3335          code += 2;
3336        break;
3337    
3338        case OP_XCLASS:
3339        code += GET(code, 1);
3340        break;
3341    
3342        case OP_MARK:
3343        case OP_PRUNE_ARG:
3344        case OP_SKIP_ARG:
3345        case OP_THEN_ARG:
3346        code += code[1];
3347        break;
3348        }
3349    
3350      /* Add in the fixed length from the table */
3351    
3352      code += PRIV(OP_lengths)[c];
3353    
3354      /* In UTF-8 mode, opcodes that are followed by a character may be followed by
3355      a multi-byte character. The length in the table is a minimum, so we have to
3356      arrange to skip the extra bytes. */
3357    
3358    #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
3359      if (utf) switch(c)
3360        {
3361        case OP_CHAR:
3362      case OP_CHARI:      case OP_CHARI:
     if (c == next) return FALSE;  
 #ifdef SUPPORT_UTF  
     if (utf)  
       {  
       pcre_uint32 othercase;  
       if (next < 128) othercase = cd->fcc[next]; else  
 #ifdef SUPPORT_UCP  
       othercase = UCD_OTHERCASE(next);  
 #else  
       othercase = NOTACHAR;  
 #endif  
       return c != othercase;  
       }  
     else  
 #endif  /* SUPPORT_UTF */  
     return (c != TABLE_GET(next, cd->fcc, next));  /* Not UTF */  
   
3363      case OP_NOT:      case OP_NOT:
     return c == next;  
   
3364      case OP_NOTI:      case OP_NOTI:
3365      if (c == next) return TRUE;      case OP_STAR:
3366  #ifdef SUPPORT_UTF      case OP_MINSTAR:
3367      if (utf)      case OP_PLUS:
3368        case OP_MINPLUS:
3369        case OP_QUERY:
3370        case OP_MINQUERY:
3371        case OP_UPTO:
3372        case OP_MINUPTO:
3373        case OP_EXACT:
3374        case OP_POSSTAR:
3375        case OP_POSPLUS:
3376        case OP_POSQUERY:
3377        case OP_POSUPTO:
3378        case OP_STARI:
3379        case OP_MINSTARI:
3380        case OP_PLUSI:
3381        case OP_MINPLUSI:
3382        case OP_QUERYI:
3383        case OP_MINQUERYI:
3384        case OP_UPTOI:
3385        case OP_MINUPTOI:
3386        case OP_EXACTI:
3387        case OP_POSSTARI:
3388        case OP_POSPLUSI:
3389        case OP_POSQUERYI:
3390        case OP_POSUPTOI:
3391        case OP_NOTSTAR:
3392        case OP_NOTMINSTAR:
3393        case OP_NOTPLUS:
3394        case OP_NOTMINPLUS:
3395        case OP_NOTQUERY:
3396        case OP_NOTMINQUERY:
3397        case OP_NOTUPTO:
3398        case OP_NOTMINUPTO:
3399        case OP_NOTEXACT:
3400        case OP_NOTPOSSTAR:
3401        case OP_NOTPOSPLUS:
3402        case OP_NOTPOSQUERY:
3403        case OP_NOTPOSUPTO:
3404        case OP_NOTSTARI:
3405        case OP_NOTMINSTARI:
3406        case OP_NOTPLUSI:
3407        case OP_NOTMINPLUSI:
3408        case OP_NOTQUERYI:
3409        case OP_NOTMINQUERYI:
3410        case OP_NOTUPTOI:
3411        case OP_NOTMINUPTOI:
3412        case OP_NOTEXACTI:
3413        case OP_NOTPOSSTARI:
3414        case OP_NOTPOSPLUSI:
3415        case OP_NOTPOSQUERYI:
3416        case OP_NOTPOSUPTOI:
3417        if (HAS_EXTRALEN(code[-1])) code += GET_EXTRALEN(code[-1]);
3418        break;
3419        }
3420    #else
3421      (void)(utf);  /* Keep compiler happy by referencing function argument */
3422    #endif
3423      }
3424    }
3425    
3426    
3427    
3428    /*************************************************
3429    *           Check for POSIX class syntax         *
3430    *************************************************/
3431    
3432    /* This function is called when the sequence "[:" or "[." or "[=" is
3433    encountered in a character class. It checks whether this is followed by a
3434    sequence of characters terminated by a matching ":]" or ".]" or "=]". If we
3435    reach an unescaped ']' without the special preceding character, return FALSE.
3436    
3437    Originally, this function only recognized a sequence of letters between the
3438    terminators, but it seems that Perl recognizes any sequence of characters,
3439    though of course unknown POSIX names are subsequently rejected. Perl gives an
3440    "Unknown POSIX class" error for [:f\oo:] for example, where previously PCRE
3441    didn't consider this to be a POSIX class. Likewise for [:1234:].
3442    
3443    The problem in trying to be exactly like Perl is in the handling of escapes. We
3444    have to be sure that [abc[:x\]pqr] is *not* treated as containing a POSIX
3445    class, but [abc[:x\]pqr:]] is (so that an error can be generated). The code
3446    below handles the special case of \], but does not try to do any other escape
3447    processing. This makes it different from Perl for cases such as [:l\ower:]
3448    where Perl recognizes it as the POSIX class "lower" but PCRE does not recognize
3449    "l\ower". This is a lesser evil that not diagnosing bad classes when Perl does,
3450    I think.
3451    
3452    A user pointed out that PCRE was rejecting [:a[:digit:]] whereas Perl was not.
3453    It seems that the appearance of a nested POSIX class supersedes an apparent
3454    external class. For example, [:a[:digit:]b:] matches "a", "b", ":", or
3455    a digit.
3456    
3457    In Perl, unescaped square brackets may also appear as part of class names. For
3458    example, [:a[:abc]b:] gives unknown POSIX class "[:abc]b:]". However, for
3459    [:a[:abc]b][b:] it gives unknown POSIX class "[:abc]b][b:]", which does not
3460    seem right at all. PCRE does not allow closing square brackets in POSIX class
3461    names.
3462    
3463    Arguments:
3464      ptr      pointer to the initial [
3465      endptr   where to return the end pointer
3466    
3467    Returns:   TRUE or FALSE
3468    */
3469    
3470    static BOOL
3471    check_posix_syntax(const pcre_uchar *ptr, const pcre_uchar **endptr)
3472    {
3473    pcre_uchar terminator;          /* Don't combine these lines; the Solaris cc */
3474    terminator = *(++ptr);   /* compiler warns about "non-constant" initializer. */
3475    for (++ptr; *ptr != CHAR_NULL; ptr++)
3476      {
3477      if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
3478        ptr++;
3479      else if (*ptr == CHAR_RIGHT_SQUARE_BRACKET) return FALSE;
3480      else
3481        {
3482        if (*ptr == terminator && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
3483        {        {
3484        pcre_uint32 othercase;        *endptr = ptr;
3485        if (next < 128) othercase = cd->fcc[next]; else        return TRUE;
 #ifdef SUPPORT_UCP  
       othercase = UCD_OTHERCASE(next);  
 #else  
       othercase = NOTACHAR;  
 #endif  
       return c == othercase;  
3486        }        }
3487      else      if (*ptr == CHAR_LEFT_SQUARE_BRACKET &&
3488  #endif  /* SUPPORT_UTF */           (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
3489      return (c == TABLE_GET(next, cd->fcc, next));  /* Not UTF */            ptr[1] == CHAR_EQUALS_SIGN) &&
3490            check_posix_syntax(ptr, endptr))
3491          return FALSE;
3492        }
3493      }
3494    return FALSE;
3495    }
3496    
     /* Note that OP_DIGIT etc. are generated only when PCRE_UCP is *not* set.  
     When it is set, \d etc. are converted into OP_(NOT_)PROP codes. */  
3497    
     case OP_DIGIT:  
     return next > 255 || (cd->ctypes[next] & ctype_digit) == 0;  
3498    
     case OP_NOT_DIGIT:  
     return next <= 255 && (cd->ctypes[next] & ctype_digit) != 0;  
3499    
3500      case OP_WHITESPACE:  /*************************************************
3501      return next > 255 || (cd->ctypes[next] & ctype_space) == 0;  *          Check POSIX class name                *
3502    *************************************************/
3503    
3504      case OP_NOT_WHITESPACE:  /* This function is called to check the name given in a POSIX-style class entry
3505      return next <= 255 && (cd->ctypes[next] & ctype_space) != 0;  such as [:alnum:].
3506    
3507      case OP_WORDCHAR:  Arguments:
3508      return next > 255 || (cd->ctypes[next] & ctype_word) == 0;    ptr        points to the first letter
3509      len        the length of the name
3510    
3511      case OP_NOT_WORDCHAR:  Returns:     a value representing the name, or -1 if unknown
3512      return next <= 255 && (cd->ctypes[next] & ctype_word) != 0;  */
3513    
3514      case OP_HSPACE:  static int
3515      case OP_NOT_HSPACE:  check_posix_name(const pcre_uchar *ptr, int len)
3516      switch(next)  {
3517        {  const char *pn = posix_names;
3518        HSPACE_CASES:  register int yield = 0;
3519        return op_code == OP_NOT_HSPACE;  while (posix_name_lengths[yield] != 0)
3520      {
3521      if (len == posix_name_lengths[yield] &&
3522        STRNCMP_UC_C8(ptr, pn, (unsigned int)len) == 0) return yield;
3523      pn += posix_name_lengths[yield] + 1;
3524      yield++;
3525      }
3526    return -1;
3527    }
3528    
       default:  
       return op_code != OP_NOT_HSPACE;  
       }  
3529    
3530      case OP_ANYNL:  /*************************************************
3531      case OP_VSPACE:  *    Adjust OP_RECURSE items in repeated group   *
3532      case OP_NOT_VSPACE:  *************************************************/
     switch(next)  
       {  
       VSPACE_CASES:  
       return op_code == OP_NOT_VSPACE;  
3533    
3534        default:  /* OP_RECURSE items contain an offset from the start of the regex to the group
3535        return op_code != OP_NOT_VSPACE;  that is referenced. This means that groups can be replicated for fixed
3536        }  repetition simply by copying (because the recursion is allowed to refer to
3537    earlier groups that are outside the current group). However, when a group is
3538    optional (i.e. the minimum quantifier is zero), OP_BRAZERO or OP_SKIPZERO is
3539    inserted before it, after it has been compiled. This means that any OP_RECURSE
3540    items within it that refer to the group itself or any contained groups have to
3541    have their offsets adjusted. That one of the jobs of this function. Before it
3542    is called, the partially compiled regex must be temporarily terminated with
3543    OP_END.
3544    
3545  #ifdef SUPPORT_UCP  This function has been extended with the possibility of forward references for
3546      case OP_PROP:  recursions and subroutine calls. It must also check the list of such references
3547      return check_char_prop(next, previous[0], previous[1], FALSE);  for the group we are dealing with. If it finds that one of the recursions in
3548    the current group is on this list, it adjusts the offset in the list, not the
3549    value in the reference (which is a group number).
3550    
3551      case OP_NOTPROP:  Arguments:
3552      return check_char_prop(next, previous[0], previous[1], TRUE);    group      points to the start of the group
3553  #endif    adjust     the amount by which the group is to be moved
3554      utf        TRUE in UTF-8 / UTF-16 / UTF-32 mode
3555      cd         contains pointers to tables etc.
3556      save_hwm   the hwm forward reference pointer at the start of the group
3557    
3558      default:  Returns:     nothing
3559      return FALSE;  */
     }  
   }  
3560    
3561  /* Handle the case when the next item is \d, \s, etc. Note that when PCRE_UCP  static void
3562  is set, \d turns into ESC_du rather than ESC_d, etc., so ESC_d etc. are  adjust_recurse(pcre_uchar *group, int adjust, BOOL utf, compile_data *cd,
3563  generated only when PCRE_UCP is *not* set, that is, when only ASCII    pcre_uchar *save_hwm)
3564  characteristics are recognized. Similarly, the opcodes OP_DIGIT etc. are  {
3565  replaced by OP_PROP codes when PCRE_UCP is set. */  pcre_uchar *ptr = group;
3566    
3567  switch(op_code)  while ((ptr = (pcre_uchar *)find_recurse(ptr, utf)) != NULL)
3568    {    {
3569    case OP_CHAR:    int offset;
3570    case OP_CHARI:    pcre_uchar *hc;
3571    switch(escape)  
3572      /* See if this recursion is on the forward reference list. If so, adjust the
3573      reference. */
3574    
3575      for (hc = save_hwm; hc < cd->hwm; hc += LINK_SIZE)
3576      {      {
3577      case ESC_d:      offset = (int)GET(hc, 0);
3578      return c > 255 || (cd->ctypes[c] & ctype_digit) == 0;      if (cd->start_code + offset == ptr + 1)
3579          {
3580          PUT(hc, 0, offset + adjust);
3581          break;
3582          }
3583        }
3584    
3585      case ESC_D:    /* Otherwise, adjust the recursion offset if it's after the start of this
3586      return c <= 255 && (cd->ctypes[c] & ctype_digit) != 0;    group. */
3587    
3588      case ESC_s:    if (hc >= cd->hwm)
3589      return c > 255 || (cd->ctypes[c] & ctype_space) == 0;      {
3590        offset = (int)GET(ptr, 1);
3591        if (cd->start_code + offset >= group) PUT(ptr, 1, offset + adjust);
3592        }
3593    
3594      case ESC_S:    ptr += 1 + LINK_SIZE;
3595      return c <= 255 && (cd->ctypes[c] & ctype_space) != 0;    }
3596    }
3597    
     case ESC_w:  
     return c > 255 || (cd->ctypes[c] & ctype_word) == 0;  
3598    
     case ESC_W:  
     return c <= 255 && (cd->ctypes[c] & ctype_word) != 0;  
3599    
3600      case ESC_h:  /*************************************************
3601      case ESC_H:  *        Insert an automatic callout point       *
3602      switch(c)  *************************************************/
       {  
       HSPACE_CASES:  
       return escape != ESC_h;  
   
       default:  
       return escape == ESC_h;  
       }  
3603    
3604      case ESC_v:  /* This function is called when the PCRE_AUTO_CALLOUT option is set, to insert
3605      case ESC_V:  callout points before each pattern item.
     switch(c)  
       {  
       VSPACE_CASES:  
       return escape != ESC_v;  
3606    
3607        default:  Arguments:
3608        return escape == ESC_v;    code           current code pointer
3609        }    ptr            current pattern pointer
3610      cd             pointers to tables etc
3611    
3612      /* When PCRE_UCP is set, these values get generated for \d etc. Find  Returns:         new code pointer
3613      their substitutions and process them. The result will always be either  */
     ESC_p or ESC_P. Then fall through to process those values. */  
3614    
3615  #ifdef SUPPORT_UCP  static pcre_uchar *
3616      case ESC_du:  auto_callout(pcre_uchar *code, const pcre_uchar *ptr, compile_data *cd)
3617      case ESC_DU:  {
3618      case ESC_wu:  *code++ = OP_CALLOUT;
3619      case ESC_WU:  *code++ = 255;
3620      case ESC_su:  PUT(code, 0, (int)(ptr - cd->start_pattern));  /* Pattern offset */
3621      case ESC_SU:  PUT(code, LINK_SIZE, 0);                       /* Default length */
3622        {  return code + 2 * LINK_SIZE;
3623        int temperrorcode = 0;  }
       ptr = substitutes[escape - ESC_DU];  
       escape = check_escape(&ptr, &next, &temperrorcode, 0, options, FALSE);  
       if (temperrorcode != 0) return FALSE;  
       ptr++;    /* For compatibility */  
       }  
     /* Fall through */  
3624    
     case ESC_p:  
     case ESC_P:  
       {  
       int ptype, pdata, errorcodeptr;  
       BOOL negated;  
3625    
       ptr--;      /* Make ptr point at the p or P */  
       ptype = get_ucp(&ptr, &negated, &pdata, &errorcodeptr);  
       if (ptype < 0) return FALSE;  
       ptr++;      /* Point past the final curly ket */  
3626    
3627        /* If the property item is optional, we have to give up. (When generated  /*************************************************
3628        from \d etc by PCRE_UCP, this test will have been applied much earlier,  *         Complete a callout item                *
3629        to the original \d etc. At this point, ptr will point to a zero byte. */  *************************************************/
3630    
3631        if (*ptr == CHAR_ASTERISK || *ptr == CHAR_QUESTION_MARK ||  /* A callout item contains the length of the next item in the pattern, which
3632          STRNCMP_UC_C8(ptr, STR_LEFT_CURLY_BRACKET STR_0 STR_COMMA, 3) == 0)  we can't fill in till after we have reached the relevant point. This is used
3633            return FALSE;  for both automatic and manual callouts.
3634    
3635        /* Do the property check. */  Arguments:
3636      previous_callout   points to previous callout item
3637      ptr                current pattern pointer
3638      cd                 pointers to tables etc
3639    
3640        return check_char_prop(c, ptype, pdata, (escape == ESC_P) != negated);  Returns:             nothing
3641        }  */
 #endif  
3642    
3643      default:  static void
3644      return FALSE;  complete_callout(pcre_uchar *previous_callout, const pcre_uchar *ptr, compile_data *cd)
3645      }  {
3646    int length = (int)(ptr - cd->start_pattern - GET(previous_callout, 2));
3647    PUT(previous_callout, 2 + LINK_SIZE, length);
3648    }
3649    
   /* In principle, support for Unicode properties should be integrated here as  
   well. It means re-organizing the above code so as to get hold of the property  
   values before switching on the op-code. However, I wonder how many patterns  
   combine ASCII \d etc with Unicode properties? (Note that if PCRE_UCP is set,  
   these op-codes are never generated.) */  
3650    
   case OP_DIGIT:  
   return escape == ESC_D || escape == ESC_s || escape == ESC_W ||  
          escape == ESC_h || escape == ESC_v || escape == ESC_R;  
3651    
3652    case OP_NOT_DIGIT:  #ifdef SUPPORT_UCP
3653    return escape == ESC_d;  /*************************************************
3654    *           Get othercase range                  *
3655    *************************************************/
3656    
3657    case OP_WHITESPACE:  /* This function is passed the start and end of a class range, in UTF-8 mode
3658    return escape == ESC_S || escape == ESC_d || escape == ESC_w;  with UCP support. It searches up the characters, looking for ranges of
3659    characters in the "other" case. Each call returns the next one, updating the
3660    start address. A character with multiple other cases is returned on its own
3661    with a special return value.
3662    
3663    case OP_NOT_WHITESPACE:  Arguments:
3664    return escape == ESC_s || escape == ESC_h || escape == ESC_v || escape == ESC_R;    cptr        points to starting character value; updated
3665      d           end value
3666      ocptr       where to put start of othercase range
3667      odptr       where to put end of othercase range
3668    
3669    case OP_HSPACE:  Yield:        -1 when no more
3670    return escape == ESC_S || escape == ESC_H || escape == ESC_d ||                 0 when a range is returned
3671           escape == ESC_w || escape == ESC_v || escape == ESC_R;                >0 the CASESET offset for char with multiple other cases
3672                    in this case, ocptr contains the original
3673    */
3674    
3675    case OP_NOT_HSPACE:  static int
3676    return escape == ESC_h;  get_othercase_range(pcre_uint32 *cptr, pcre_uint32 d, pcre_uint32 *ocptr,
3677      pcre_uint32 *odptr)
3678    {
3679    pcre_uint32 c, othercase, next;
3680    unsigned int co;
3681    
3682    /* Can't have \S in here because VT matches \S (Perl anomaly) */  /* Find the first character that has an other case. If it has multiple other
3683    case OP_ANYNL:  cases, return its case offset value. */
   case OP_VSPACE:  
   return escape == ESC_V || escape == ESC_d || escape == ESC_w;  
3684    
3685    case OP_NOT_VSPACE:  for (c = *cptr; c <= d; c++)
3686    return escape == ESC_v || escape == ESC_R;    {
3687      if ((co = UCD_CASESET(c)) != 0)
3688        {
3689        *ocptr = c++;   /* Character that has the set */
3690        *cptr = c;      /* Rest of input range */
3691        return (int)co;
3692        }
3693      if ((othercase = UCD_OTHERCASE(c)) != c) break;
3694      }
3695    
3696    case OP_WORDCHAR:  if (c > d) return -1;  /* Reached end of range */
   return escape == ESC_W || escape == ESC_s || escape == ESC_h ||  
          escape == ESC_v || escape == ESC_R;  
3697    
3698    case OP_NOT_WORDCHAR:  *ocptr = othercase;
3699    return escape == ESC_w || escape == ESC_d;  next = othercase + 1;
3700    
3701    default:  for (++c; c <= d; c++)
3702    return FALSE;    {
3703      if (UCD_OTHERCASE(c) != next) break;
3704      next++;
3705    }    }
3706    
3707  /* Control does not reach here */  *odptr = next - 1;     /* End of othercase range */
3708    *cptr = c;             /* Rest of input range */
3709    return 0;
3710  }  }
3711    #endif  /* SUPPORT_UCP */
3712    
3713    
3714    
# Line 3418  switch(op_code) Line 3717  switch(op_code)
3717  *************************************************/  *************************************************/
3718    
3719  /* This function packages up the logic of adding a character or range of  /* This function packages up the logic of adding a character or range of
3720  characters to a class. The character values in the arguments will be within the  characters to a class. The character values in the arguments will be within the
3721  valid values for the current mode (8-bit, 16-bit, UTF, etc). This function is  valid values for the current mode (8-bit, 16-bit, UTF, etc). This function is
3722  mutually recursive with the function immediately below.  mutually recursive with the function immediately below.
3723    
3724  Arguments:  Arguments:
3725    classbits     the bit map for characters < 256    classbits     the bit map for characters < 256
3726    uchardptr     points to the pointer for extra data    uchardptr     points to the pointer for extra data
3727    options       the options word    options       the options word
3728    cd            contains pointers to tables etc.    cd            contains pointers to tables etc.
3729    start         start of range character    start         start of range character
3730    end           end of range character    end           end of range character
3731    
3732  Returns:        the number of < 256 characters added  Returns:        the number of < 256 characters added
3733                  the pointer to extra data is updated                  the pointer to extra data is updated
3734  */  */
# Line 3441  add_to_class(pcre_uint8 *classbits, pcre Line 3740  add_to_class(pcre_uint8 *classbits, pcre
3740  pcre_uint32 c;  pcre_uint32 c;
3741  int n8 = 0;  int n8 = 0;
3742    
3743  /* If caseless matching is required, scan the range and process alternate  /* If caseless matching is required, scan the range and process alternate
3744  cases. In Unicode, there are 8-bit characters that have alternate cases that  cases. In Unicode, there are 8-bit characters that have alternate cases that
3745  are greater than 255 and vice-versa. Sometimes we can just extend the original  are greater than 255 and vice-versa. Sometimes we can just extend the original
3746  range. */  range. */
3747    
3748  if ((options & PCRE_CASELESS) != 0)  if ((options & PCRE_CASELESS) != 0)
3749    {    {
3750  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
3751    if ((options & PCRE_UTF8) != 0)    if ((options & PCRE_UTF8) != 0)
3752      {      {
3753      int rc;      int rc;
3754      pcre_uint32 oc, od;      pcre_uint32 oc, od;
3755    
3756      options &= ~PCRE_CASELESS;   /* Remove for recursive calls */      options &= ~PCRE_CASELESS;   /* Remove for recursive calls */
3757      c = start;      c = start;
3758    
3759      while ((rc = get_othercase_range(&c, end, &oc, &od)) >= 0)      while ((rc = get_othercase_range(&c, end, &oc, &od)) >= 0)
3760        {        {
3761        /* Handle a single character that has more than one other case. */        /* Handle a single character that has more than one other case. */
3762    
3763        if (rc > 0) n8 += add_list_to_class(classbits, uchardptr, options, cd,        if (rc > 0) n8 += add_list_to_class(classbits, uchardptr, options, cd,
3764          PRIV(ucd_caseless_sets) + rc, oc);          PRIV(ucd_caseless_sets) + rc, oc);
3765    
3766        /* Do nothing if the other case range is within the original range. */        /* Do nothing if the other case range is within the original range. */
3767    
3768        else if (oc >= start && od <= end) continue;        else if (oc >= start && od <= end) continue;
3769    
3770        /* Extend the original range if there is overlap, noting that if oc < c, we        /* Extend the original range if there is overlap, noting that if oc < c, we
3771        can't have od > end because a subrange is always shorter than the basic        can't have od > end because a subrange is always shorter than the basic
3772        range. Otherwise, use a recursive call to add the additional range. */        range. Otherwise, use a recursive call to add the additional range. */
3773    
3774        else if (oc < start && od >= start - 1) start = oc; /* Extend downwards */        else if (oc < start && od >= start - 1) start = oc; /* Extend downwards */
3775        else if (od > end && oc <= end + 1) end = od;       /* Extend upwards */        else if (od > end && oc <= end + 1) end = od;       /* Extend upwards */
3776        else n8 += add_to_class(classbits, uchardptr, options, cd, oc, od);        else n8 += add_to_class(classbits, uchardptr, options, cd, oc, od);
# Line 3481  if ((options & PCRE_CASELESS) != 0) Line 3780  if ((options & PCRE_CASELESS) != 0)
3780  #endif  /* SUPPORT_UCP */  #endif  /* SUPPORT_UCP */
3781    
3782    /* Not UTF-mode, or no UCP */    /* Not UTF-mode, or no UCP */
3783    
3784    for (c = start; c <= end && c < 256; c++)    for (c = start; c <= end && c < 256; c++)
3785      {      {
3786      SETBIT(classbits, cd->fcc[c]);      SETBIT(classbits, cd->fcc[c]);
3787      n8++;      n8++;
3788      }      }
3789    }    }
3790    
3791  /* Now handle the original range. Adjust the final value according to the bit  /* Now handle the original range. Adjust the final value according to the bit
3792  length - this means that the same lists of (e.g.) horizontal spaces can be used  length - this means that the same lists of (e.g.) horizontal spaces can be used
3793  in all cases. */  in all cases. */
# Line 3514  if (end < 0x100) Line 3813  if (end < 0x100)
3813    {    {
3814    for (c = start; c <= end; c++)    for (c = start; c <= end; c++)
3815      {      {
3816      n8++;      n8++;
3817      SETBIT(classbits, c);      SETBIT(classbits, c);
3818      }      }
3819    }    }
3820    
3821  else  else
3822    {    {
3823    pcre_uchar *uchardata = *uchardptr;    pcre_uchar *uchardata = *uchardptr;
3824    
3825  #ifdef SUPPORT_UTF  #ifdef SUPPORT_UTF
3826    if ((options & PCRE_UTF8) != 0)  /* All UTFs use the same flag bit */    if ((options & PCRE_UTF8) != 0)  /* All UTFs use the same flag bit */
3827      {      {
3828      if (start < end)      if (start < end)
3829        {        {
3830        *uchardata++ = XCL_RANGE;        *uchardata++ = XCL_RANGE;
3831        uchardata += PRIV(ord2utf)(start, uchardata);        uchardata += PRIV(ord2utf)(start, uchardata);
3832        uchardata += PRIV(ord2utf)(end, uchardata);        uchardata += PRIV(ord2utf)(end, uchardata);
3833        }        }
3834      else if (start == end)      else if (start == end)
3835        {        {
3836        *uchardata++ = XCL_SINGLE;        *uchardata++ = XCL_SINGLE;
3837        uchardata += PRIV(ord2utf)(start, uchardata);        uchardata += PRIV(ord2utf)(start, uchardata);
3838        }        }
3839      }      }
3840    else    else
3841  #endif  /* SUPPORT_UTF */  #endif  /* SUPPORT_UTF */
3842    
3843    /* Without UTF support, character values are constrained by the bit length,    /* Without UTF support, character values are constrained by the bit length,
3844    and can only be > 256 for 16-bit and 32-bit libraries. */    and can only be > 256 for 16-bit and 32-bit libraries. */
3845    
3846  #ifdef COMPILE_PCRE8  #ifdef COMPILE_PCRE8
3847      {}      {}
3848  #else  #else
3849    if (start < end)    if (start < end)
3850      {      {
3851      *uchardata++ = XCL_RANGE;      *uchardata++ = XCL_RANGE;
# Line 3557  else Line 3856  else
3856      {      {
3857      *uchardata++ = XCL_SINGLE;      *uchardata++ = XCL_SINGLE;
3858      *uchardata++ = start;      *uchardata++ = start;
3859      }      }
3860  #endif  #endif
3861    
3862    *uchardptr = uchardata;   /* Updata extra data pointer */    *uchardptr = uchardata;   /* Updata extra data pointer */
3863    }    }
3864    
3865  return n8;    /* Number of 8-bit characters */  return n8;    /* Number of 8-bit characters */
3866  }  }
3867    
3868    
3869    
3870    
3871  /*************************************************  /*************************************************
3872  *        Add a list of characters to a class     *  *        Add a list of characters to a class     *
3873  *************************************************/  *************************************************/
3874    
3875  /* This function is used for adding a list of case-equivalent characters to a  /* This function is used for adding a list of case-equivalent characters to a
3876  class, and also for adding a list of horizontal or vertical whitespace. If the  class, and also for adding a list of horizontal or vertical whitespace. If the
3877  list is in order (which it should be), ranges of characters are detected and  list is in order (which it should be), ranges of characters are detected and
3878  handled appropriately. This function is mutually recursive with the function  handled appropriately. This function is mutually recursive with the function
# Line 3583  Arguments: Line 3882  Arguments:
3882    classbits     the bit map for characters < 256    classbits     the bit map for characters < 256
3883    uchardptr     points to the pointer for extra data    uchardptr     points to the pointer for extra data
3884    options       the options word    options       the options word
3885    cd            contains pointers to tables etc.    cd            contains pointers to tables etc.
3886    p             points to row of 32-bit values, terminated by NOTACHAR    p             points to row of 32-bit values, terminated by NOTACHAR
3887    except        character to omit; this is used when adding lists of    except        character to omit; this is used when adding lists of
3888                    case-equivalent characters to avoid including the one we                    case-equivalent characters to avoid including the one we
3889                    already know about                    already know about
3890    
3891  Returns:        the number of < 256 characters added  Returns:        the number of < 256 characters added
3892                  the pointer to extra data is updated                  the pointer to extra data is updated
3893  */  */
# Line 3602  while (p[0] < NOTACHAR) Line 3901  while (p[0] < NOTACHAR)
3901    {    {
3902    int n = 0;    int n = 0;
3903    if (p[0] != except)    if (p[0] != except)
3904      {      {
3905      while(p[n+1] == p[0] + n + 1) n++;      while(p[n+1] == p[0] + n + 1) n++;
3906      n8 += add_to_class(classbits, uchardptr, options, cd, p[0], p[n]);      n8 += add_to_class(classbits, uchardptr, options, cd, p[0], p[n]);
3907      }      }
3908    p += n + 1;    p += n + 1;
3909    }    }
3910  return n8;  return n8;
3911  }  }
3912    
3913    
3914    
# Line 3624  Arguments: Line 3923  Arguments:
3923    classbits     the bit map for characters < 256    classbits     the bit map for characters < 256
3924    uchardptr     points to the pointer for extra data    uchardptr     points to the pointer for extra data
3925    options       the options word    options       the options word
3926    cd            contains pointers to tables etc.    cd            contains pointers to tables etc.
3927    p             points to row of 32-bit values, terminated by NOTACHAR    p             points to row of 32-bit values, terminated by NOTACHAR
3928    
3929  Returns:        the number of < 256 characters added  Returns:        the number of < 256 characters added
3930                  the pointer to extra data is updated                  the pointer to extra data is updated
3931  */  */
3932    
3933  static int  static int
3934  add_not_list_to_class(pcre_uint8 *classbits, pcre_uchar **uchardptr,  add_not_list_to_class(pcre_uint8 *classbits, pcre_uchar **uchardptr,
3935    int options, compile_data *cd, const pcre_uint32 *p)    int options, compile_data *cd, const pcre_uint32 *p)
3936  {  {
3937  BOOL utf = (options & PCRE_UTF8) != 0;  BOOL utf = (options & PCRE_UTF8) != 0;
# Line 3644  while (p[0] < NOTACHAR) Line 3943  while (p[0] < NOTACHAR)
3943    while (p[1] == p[0] + 1) p++;    while (p[1] == p[0] + 1) p++;
3944    n8 += add_to_class(classbits, uchardptr, options, cd, p[0] + 1,    n8 += add_to_class(classbits, uchardptr, options, cd, p[0] + 1,
3945      (p[1] == NOTACHAR) ? (utf ? 0x10ffffu : 0xffffffffu) : p[1] - 1);      (p[1] == NOTACHAR) ? (utf ? 0x10ffffu : 0xffffffffu) : p[1] - 1);
3946    p++;    p++;
3947    }    }
3948  return n8;  return n8;
3949  }  }
3950    
3951    
3952    
# Line 3662  to find out the amount of memory needed, Line 3961  to find out the amount of memory needed,
3961  phase. The value of lengthptr distinguishes the two phases.  phase. The value of lengthptr distinguishes the two phases.
3962    
3963  Arguments:  Arguments:
3964    optionsptr     pointer to the option bits    optionsptr        pointer to the option bits
3965    codeptr        points to the pointer to the current code point    codeptr           points to the pointer to the current code point
3966    ptrptr         points to the current pattern pointer    ptrptr            points to the current pattern pointer
3967    errorcodeptr   points to error code variable    errorcodeptr      points to error code variable
3968    firstcharptr   set to initial literal character, or < 0 (REQ_UNSET, REQ_NONE)    firstcharptr      place to put the first required character
3969    reqcharptr     set to the last literal character required, else < 0    firstcharflagsptr place to put the first character flags, or a negative number
3970    bcptr          points to current branch chain    reqcharptr        place to put the last required character
3971    cond_depth     conditional nesting depth    reqcharflagsptr   place to put the last required character flags, or a negative number
3972    cd             contains pointers to tables etc.    bcptr             points to current branch chain
3973    lengthptr      NULL during the real compile phase    cond_depth        conditional nesting depth
3974                   points to length accumulator during pre-compile phase    cd                contains pointers to tables etc.
3975      lengthptr         NULL during the real compile phase
3976                        points to length accumulator during pre-compile phase
3977    
3978  Returns:         TRUE on success  Returns:            TRUE on success
3979                   FALSE, with *errorcodeptr set non-zero on error                      FALSE, with *errorcodeptr set non-zero on error
3980  */  */
3981    
3982  static BOOL  static BOOL
3983  compile_branch(int *optionsptr, pcre_uchar **codeptr,  compile_branch(int *optionsptr, pcre_uchar **codeptr,
3984    const pcre_uchar **ptrptr, int *errorcodeptr, pcre_int32 *firstcharptr,    const pcre_uchar **ptrptr, int *errorcodeptr,
3985    pcre_int32 *reqcharptr, branch_chain *bcptr, int cond_depth,    pcre_uint32 *firstcharptr, pcre_int32 *firstcharflagsptr,
3986      pcre_uint32 *reqcharptr, pcre_int32 *reqcharflagsptr,
3987      branch_chain *bcptr, int cond_depth,
3988    compile_data *cd, int *lengthptr)    compile_data *cd, int *lengthptr)
3989  {  {
3990  int repeat_type, op_type;  int repeat_type, op_type;
3991  int repeat_min = 0, repeat_max = 0;      /* To please picky compilers */  int repeat_min = 0, repeat_max = 0;      /* To please picky compilers */
3992  int bravalue = 0;  int bravalue = 0;
3993  int greedy_default, greedy_non_default;  int greedy_default, greedy_non_default;
3994  pcre_int32 firstchar, reqchar;  pcre_uint32 firstchar, reqchar;
3995  pcre_int32 zeroreqchar, zerofirstchar;  pcre_int32 firstcharflags, reqcharflags;
3996    pcre_uint32 zeroreqchar, zerofirstchar;
3997    pcre_int32 zeroreqcharflags, zerofirstcharflags;
3998  pcre_int32 req_caseopt, reqvary, tempreqvary;  pcre_int32 req_caseopt, reqvary, tempreqvary;
3999  int options = *optionsptr;               /* May change dynamically */  int options = *optionsptr;               /* May change dynamically */
4000  int after_manual_callout = 0;  int after_manual_callout = 0;
# Line 3717  dynamically as we process the pattern. * Line 4022  dynamically as we process the pattern. *
4022  #ifdef SUPPORT_UTF  #ifdef SUPPORT_UTF
4023  /* PCRE_UTF[16|32] have the same value as PCRE_UTF8. */  /* PCRE_UTF[16|32] have the same value as PCRE_UTF8. */
4024  BOOL utf = (options & PCRE_UTF8) != 0;  BOOL utf = (options & PCRE_UTF8) != 0;
4025    #ifndef COMPILE_PCRE32
4026  pcre_uchar utf_chars[6];  pcre_uchar utf_chars[6];
4027    #endif
4028  #else  #else
4029  BOOL utf = FALSE;  BOOL utf = FALSE;
4030  #endif  #endif
4031    
4032  /* Helper variables for OP_XCLASS opcode (for characters > 255). We define  /* Helper variables for OP_XCLASS opcode (for characters > 255). We define
4033  class_uchardata always so that it can be passed to add_to_class() always,  class_uchardata always so that it can be passed to add_to_class() always,
4034  though it will not be used in non-UTF 8-bit cases. This avoids having to supply  though it will not be used in non-UTF 8-bit cases. This avoids having to supply
4035  alternative calls for the different cases. */  alternative calls for the different cases. */
4036    
4037  pcre_uchar *class_uchardata;  pcre_uchar *class_uchardata;
# Line 3752  to take the zero repeat into account. Th Line 4059  to take the zero repeat into account. Th
4059  zerofirstbyte and zeroreqchar when such a repeat is encountered. The individual  zerofirstbyte and zeroreqchar when such a repeat is encountered. The individual
4060  item types that can be repeated set these backoff variables appropriately. */  item types that can be repeated set these backoff variables appropriately. */
4061    
4062  firstchar = reqchar = zerofirstchar = zeroreqchar = REQ_UNSET;  firstchar = reqchar = zerofirstchar = zeroreqchar = 0;
4063    firstcharflags = reqcharflags = zerofirstcharflags = zeroreqcharflags = REQ_UNSET;
4064    
4065  /* The variable req_caseopt contains either the REQ_CASELESS value  /* The variable req_caseopt contains either the REQ_CASELESS value
4066  or zero, according to the current setting of the caseless flag. The  or zero, according to the current setting of the caseless flag. The
# Line 3778  for (;; ptr++) Line 4086  for (;; ptr++)
4086    int recno;    int recno;
4087    int refsign;    int refsign;
4088    int skipbytes;    int skipbytes;
4089    int subreqchar;    pcre_uint32 subreqchar, subfirstchar;
4090    int subfirstchar;    pcre_int32 subreqcharflags, subfirstcharflags;
4091    int terminator;    int terminator;
4092    int mclength;    unsigned int mclength;
4093    int tempbracount;    unsigned int tempbracount;
4094    int ec; // FIXMEchpe pcre_uint32    pcre_uint32 ec;
4095    pcre_uchar mcbuffer[8];    pcre_uchar mcbuffer[8];
4096    
4097    /* Get next character in the pattern */    /* Get next character in the pattern */
# Line 3793  for (;; ptr++) Line 4101  for (;; ptr++)
4101    /* If we are at the end of a nested substitution, revert to the outer level    /* If we are at the end of a nested substitution, revert to the outer level
4102    string. Nesting only happens one level deep. */    string. Nesting only happens one level deep. */
4103    
4104    if (c == 0 && nestptr != NULL)    if (c == CHAR_NULL && nestptr != NULL)
4105      {      {
4106      ptr = nestptr;      ptr = nestptr;
4107      nestptr = NULL;      nestptr = NULL;
# Line 3868  for (;; ptr++) Line 4176  for (;; ptr++)
4176    
4177    /* If in \Q...\E, check for the end; if not, we have a literal */    /* If in \Q...\E, check for the end; if not, we have a literal */
4178    
4179    if (inescq && c != 0)    if (inescq && c != CHAR_NULL)
4180      {      {
4181      if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E)      if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E)
4182        {        {
# Line 3916  for (;; ptr++) Line 4224  for (;; ptr++)
4224      if (c == CHAR_NUMBER_SIGN)      if (c == CHAR_NUMBER_SIGN)
4225        {        {
4226        ptr++;        ptr++;
4227        while (*ptr != 0)        while (*ptr != CHAR_NULL)
4228          {          {
4229          if (IS_NEWLINE(ptr)) { ptr += cd->nllen - 1; break; }          if (IS_NEWLINE(ptr)) { ptr += cd->nllen - 1; break; }
4230          ptr++;          ptr++;
# Line 3924  for (;; ptr++) Line 4232  for (;; ptr++)
4232          if (utf) FORWARDCHAR(ptr);          if (utf) FORWARDCHAR(ptr);
4233  #endif  #endif
4234          }          }
4235        if (*ptr != 0) continue;        if (*ptr != CHAR_NULL) continue;
4236    
4237        /* Else fall through to handle end of string */        /* Else fall through to handle end of string */
4238        c = 0;        c = 0;
# Line 3946  for (;; ptr++) Line 4254  for (;; ptr++)
4254      case CHAR_VERTICAL_LINE:       /* or | or ) */      case CHAR_VERTICAL_LINE:       /* or | or ) */
4255      case CHAR_RIGHT_PARENTHESIS:      case CHAR_RIGHT_PARENTHESIS:
4256      *firstcharptr = firstchar;      *firstcharptr = firstchar;
4257        *firstcharflagsptr = firstcharflags;
4258      *reqcharptr = reqchar;      *reqcharptr = reqchar;
4259        *reqcharflagsptr = reqcharflags;
4260      *codeptr = code;      *codeptr = code;
4261      *ptrptr = ptr;      *ptrptr = ptr;
4262      if (lengthptr != NULL)      if (lengthptr != NULL)
# Line 3970  for (;; ptr++) Line 4280  for (;; ptr++)
4280      previous = NULL;      previous = NULL;
4281      if ((options & PCRE_MULTILINE) != 0)      if ((options & PCRE_MULTILINE) != 0)
4282        {        {
4283        if (firstchar == REQ_UNSET) firstchar = REQ_NONE;        if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
4284        *code++ = OP_CIRCM;        *code++ = OP_CIRCM;
4285        }        }
4286      else *code++ = OP_CIRC;      else *code++ = OP_CIRC;
# Line 3985  for (;; ptr++) Line 4295  for (;; ptr++)
4295      repeats. The value of reqchar doesn't change either. */      repeats. The value of reqchar doesn't change either. */
4296    
4297      case CHAR_DOT:      case CHAR_DOT:
4298      if (firstchar == REQ_UNSET) firstchar = REQ_NONE;      if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
4299      zerofirstchar = firstchar;      zerofirstchar = firstchar;
4300        zerofirstcharflags = firstcharflags;
4301      zeroreqchar = reqchar;      zeroreqchar = reqchar;
4302        zeroreqcharflags = reqcharflags;
4303      previous = code;      previous = code;
4304      *code++ = ((options & PCRE_DOTALL) != 0)? OP_ALLANY: OP_ANY;      *code++ = ((options & PCRE_DOTALL) != 0)? OP_ALLANY: OP_ANY;
4305      break;      break;
# Line 4061  for (;; ptr++) Line 4373  for (;; ptr++)
4373          (cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0)          (cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0)
4374        {        {
4375        *code++ = negate_class? OP_ALLANY : OP_FAIL;        *code++ = negate_class? OP_ALLANY : OP_FAIL;
4376        if (firstchar == REQ_UNSET) firstchar = REQ_NONE;        if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
4377        zerofirstchar = firstchar;        zerofirstchar = firstchar;
4378          zerofirstcharflags = firstcharflags;
4379        break;        break;
4380        }        }
4381    
# Line 4097  for (;; ptr++) Line 4410  for (;; ptr++)
4410      means that an initial ] is taken as a data character. At the start of the      means that an initial ] is taken as a data character. At the start of the
4411      loop, c contains the first byte of the character. */      loop, c contains the first byte of the character. */
4412    
4413      if (c != 0) do      if (c != CHAR_NULL) do
4414        {        {
4415        const pcre_uchar *oldptr;        const pcre_uchar *oldptr;
4416    
4417  #if defined SUPPORT_UTF && !defined COMPILE_PCRE32  #ifdef SUPPORT_UTF
4418        if (utf && HAS_EXTRALEN(c))        if (utf && HAS_EXTRALEN(c))
4419          {                           /* Braces are required because the */          {                           /* Braces are required because the */
4420          GETCHARLEN(c, ptr, ptr);    /* macro generates multiple statements */          GETCHARLEN(c, ptr, ptr);    /* macro generates multiple statements */
# Line 4112  for (;; ptr++) Line 4425  for (;; ptr++)
4425        /* In the pre-compile phase, accumulate the length of any extra        /* In the pre-compile phase, accumulate the length of any extra
4426        data and reset the pointer. This is so that very large classes that        data and reset the pointer. This is so that very large classes that
4427        contain a zillion > 255 characters no longer overwrite the work space        contain a zillion > 255 characters no longer overwrite the work space
4428        (which is on the stack). We have to remember that there was XCLASS data,        (which is on the stack). We have to remember that there was XCLASS data,
4429        however. */        however. */
4430    
4431        if (lengthptr != NULL && class_uchardata > class_uchardata_base)        if (lengthptr != NULL && class_uchardata > class_uchardata_base)
# Line 4176  for (;; ptr++) Line 4489  for (;; ptr++)
4489          alpha. This relies on the fact that the class table starts with          alpha. This relies on the fact that the class table starts with
4490          alpha, lower, upper as the first 3 entries. */          alpha, lower, upper as the first 3 entries. */
4491    
4492          if ((options & PCRE_CASELESS) != 0 && posix_class <= 2)          if ((options & PCRE_CASELESS) != 0 && posix_class <= 2)
4493            posix_class = 0;            posix_class = 0;
4494    
4495          /* When PCRE_UCP is set, some of the POSIX classes are converted to          /* When PCRE_UCP is set, some of the POSIX classes are converted to
# Line 4253  for (;; ptr++) Line 4566  for (;; ptr++)
4566    
4567        if (c == CHAR_BACKSLASH)        if (c == CHAR_BACKSLASH)
4568          {          {
4569          escape = check_escape(&ptr, &ec, errorcodeptr, cd->bracount, options, TRUE);          escape = check_escape(&ptr, &ec, errorcodeptr, cd->bracount, options,
4570              TRUE);
4571          if (*errorcodeptr != 0) goto FAILED;          if (*errorcodeptr != 0) goto FAILED;
4572            if (escape == 0) c = ec;
         if (escape == 0)  
           c = ec;  
4573          else if (escape == ESC_b) c = CHAR_BS; /* \b is backspace in a class */          else if (escape == ESC_b) c = CHAR_BS; /* \b is backspace in a class */
4574          else if (escape == ESC_N)            /* \N is not supported in a class */          else if (escape == ESC_N)          /* \N is not supported in a class */
4575            {            {
4576            *errorcodeptr = ERR71;            *errorcodeptr = ERR71;
4577            goto FAILED;            goto FAILED;
# Line 4332  for (;; ptr++) Line 4643  for (;; ptr++)
4643              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_space];              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_space];
4644              classbits[1] |= 0x08;    /* Perl 5.004 onwards omits VT from \s */              classbits[1] |= 0x08;    /* Perl 5.004 onwards omits VT from \s */
4645              continue;              continue;
4646    
4647              /* The rest apply in both UCP and non-UCP cases. */              /* The rest apply in both UCP and non-UCP cases. */
4648    
4649              case ESC_h:              case ESC_h:
4650              (void)add_list_to_class(classbits, &class_uchardata, options, cd,              (void)add_list_to_class(classbits, &class_uchardata, options, cd,
4651                PRIV(hspace_list), NOTACHAR);                PRIV(hspace_list), NOTACHAR);
4652              continue;              continue;
4653    
4654              case ESC_H:              case ESC_H:
4655              (void)add_not_list_to_class(classbits, &class_uchardata, options,              (void)add_not_list_to_class(classbits, &class_uchardata, options,
4656                cd, PRIV(hspace_list));                cd, PRIV(hspace_list));
4657              continue;              continue;
4658    
4659              case ESC_v:              case ESC_v:
4660              (void)add_list_to_class(classbits, &class_uchardata, options, cd,              (void)add_list_to_class(classbits, &class_uchardata, options, cd,
4661                PRIV(vspace_list), NOTACHAR);                PRIV(vspace_list), NOTACHAR);
4662              continue;              continue;
4663    
4664              case ESC_V:              case ESC_V:
4665              (void)add_not_list_to_class(classbits, &class_uchardata, options,              (void)add_not_list_to_class(classbits, &class_uchardata, options,
4666                cd, PRIV(vspace_list));                cd, PRIV(vspace_list));
4667              continue;              continue;
4668    
4669  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
# Line 4360  for (;; ptr++) Line 4671  for (;; ptr++)
4671              case ESC_P:              case ESC_P:
4672                {                {
4673                BOOL negated;                BOOL negated;
4674                int pdata;                unsigned int ptype = 0, pdata = 0;
4675                int ptype = get_ucp(&ptr, &negated, &pdata, errorcodeptr);                if (!get_ucp(&ptr, &negated, &ptype, &pdata, errorcodeptr))
4676                if (ptype < 0) goto FAILED;                  goto FAILED;
4677                *class_uchardata++ = ((escape == ESC_p) != negated)?                *class_uchardata++ = ((escape == ESC_p) != negated)?
4678                  XCL_PROP : XCL_NOTPROP;                  XCL_PROP : XCL_NOTPROP;
4679                *class_uchardata++ = ptype;                *class_uchardata++ = ptype;
# Line 4390  for (;; ptr++) Line 4701  for (;; ptr++)
4701    
4702          /* Fall through if the escape just defined a single character (c >= 0).          /* Fall through if the escape just defined a single character (c >= 0).
4703          This may be greater than 256. */          This may be greater than 256. */
4704    
4705          escape = 0;          escape = 0;
4706    
4707          }   /* End of backslash handling */          }   /* End of backslash handling */
# Line 4416  for (;; ptr++) Line 4727  for (;; ptr++)
4727    
4728        if (!inescq && ptr[1] == CHAR_MINUS)        if (!inescq && ptr[1] == CHAR_MINUS)
4729          {          {
4730          int d;          pcre_uint32 d;
4731          ptr += 2;          ptr += 2;
4732          while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E) ptr += 2;          while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E) ptr += 2;
4733    
# Line 4431  for (;; ptr++) Line 4742  for (;; ptr++)
4742            inescq = TRUE;            inescq = TRUE;
4743            break;            break;
4744            }            }
4745    
4746          /* Minus (hyphen) at the end of a class is treated as a literal, so put          /* Minus (hyphen) at the end of a class is treated as a literal, so put
4747          back the pointer and jump to handle the character that preceded it. */          back the pointer and jump to handle the character that preceded it. */
4748    
4749          if (*ptr == 0 || (!inescq && *ptr == CHAR_RIGHT_SQUARE_BRACKET))          if (*ptr == CHAR_NULL || (!inescq && *ptr == CHAR_RIGHT_SQUARE_BRACKET))
4750            {            {
4751            ptr = oldptr;            ptr = oldptr;
4752            goto CLASS_SINGLE_CHARACTER;            goto CLASS_SINGLE_CHARACTER;
4753            }            }
4754    
4755          /* Otherwise, we have a potential range; pick up the next character */          /* Otherwise, we have a potential range; pick up the next character */
4756    
4757  #ifdef SUPPORT_UTF  #ifdef SUPPORT_UTF
# Line 4487  for (;; ptr++) Line 4798  for (;; ptr++)
4798          /* We have found a character range, so single character optimizations          /* We have found a character range, so single character optimizations
4799          cannot be done anymore. Any value greater than 1 indicates that there          cannot be done anymore. Any value greater than 1 indicates that there
4800          is more than one character. */          is more than one character. */
4801    
4802          class_one_char = 2;          class_one_char = 2;
4803    
4804          /* Remember an explicit \r or \n, and add the range to the class. */          /* Remember an explicit \r or \n, and add the range to the class. */
4805    
4806          if (d == CHAR_CR || d == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF;          if (d == CHAR_CR || d == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF;
4807    
4808          class_has_8bitchar +=          class_has_8bitchar +=
4809            add_to_class(classbits, &class_uchardata, options, cd, c, d);            add_to_class(classbits, &class_uchardata, options, cd, c, d);
4810    
4811          continue;   /* Go get the next char in the class */          continue;   /* Go get the next char in the class */
4812          }          }
4813    
4814        /* Handle a single character - we can get here for a normal non-escape        /* Handle a single character - we can get here for a normal non-escape
4815        char, or after \ that introduces a single character or for an apparent        char, or after \ that introduces a single character or for an apparent
4816        range that isn't. Only the value 1 matters for class_one_char, so don't        range that isn't. Only the value 1 matters for class_one_char, so don't
4817        increase it if it is already 2 or more ... just in case there's a class        increase it if it is already 2 or more ... just in case there's a class
4818        with a zillion characters in it. */        with a zillion characters in it. */
4819    
4820        CLASS_SINGLE_CHARACTER:        CLASS_SINGLE_CHARACTER:
# Line 4522  for (;; ptr++) Line 4833  for (;; ptr++)
4833          {          {
4834          ptr++;          ptr++;
4835          zeroreqchar = reqchar;          zeroreqchar = reqchar;
4836            zeroreqcharflags = reqcharflags;
4837    
4838          if (negate_class)          if (negate_class)
4839            {            {
4840  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
             // FIXMEchpe pcreuint32?  
4841            int d;            int d;
4842  #endif  #endif
4843            if (firstchar == REQ_UNSET) firstchar = REQ_NONE;            if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
4844            zerofirstchar = firstchar;            zerofirstchar = firstchar;
4845              zerofirstcharflags = firstcharflags;
4846    
4847            /* For caseless UTF-8 mode when UCP support is available, check            /* For caseless UTF-8 mode when UCP support is available, check
4848            whether this character has more than one other case. If so, generate            whether this character has more than one other case. If so, generate
4849            a special OP_NOTPROP item instead of OP_NOTI. */            a special OP_NOTPROP item instead of OP_NOTI. */
4850    
4851  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
4852            if (utf && (options & PCRE_CASELESS) != 0 &&            if (utf && (options & PCRE_CASELESS) != 0 &&
4853                (d = UCD_CASESET(c)) != 0)                (d = UCD_CASESET(c)) != 0)
4854              {              {
4855              *code++ = OP_NOTPROP;              *code++ = OP_NOTPROP;
4856              *code++ = PT_CLIST;              *code++ = PT_CLIST;
4857              *code++ = d;              *code++ = d;
4858              }              }
4859            else            else
4860  #endif  #endif
4861            /* Char has only one other case, or UCP not available */            /* Char has only one other case, or UCP not available */
4862    
# Line 4557  for (;; ptr++) Line 4869  for (;; ptr++)
4869  #endif  #endif
4870                *code++ = c;                *code++ = c;
4871              }              }
4872    
4873            /* We are finished with this character class */            /* We are finished with this character class */
4874    
4875            goto END_CLASS;            goto END_CLASS;
4876            }            }
4877    
# Line 4577  for (;; ptr++) Line 4889  for (;; ptr++)
4889            }            }
4890          goto ONE_CHAR;          goto ONE_CHAR;
4891          }       /* End of 1-char optimization */          }       /* End of 1-char optimization */
4892    
4893        /* There is more than one character in the class, or an XCLASS item        /* There is more than one character in the class, or an XCLASS item
4894        has been generated. Add this character to the class. */        has been generated. Add this character to the class. */
4895    
4896        class_has_8bitchar +=        class_has_8bitchar +=
4897          add_to_class(classbits, &class_uchardata, options, cd, c, c);          add_to_class(classbits, &class_uchardata, options, cd, c, c);
4898        }        }
4899    
# Line 4589  for (;; ptr++) Line 4901  for (;; ptr++)
4901      If we are at the end of an internal nested string, revert to the outer      If we are at the end of an internal nested string, revert to the outer
4902      string. */      string. */
4903    
4904      while (((c = *(++ptr)) != 0 ||      while (((c = *(++ptr)) != CHAR_NULL ||
4905             (nestptr != NULL &&             (nestptr != NULL &&
4906               (ptr = nestptr, nestptr = NULL, c = *(++ptr)) != 0)) &&               (ptr = nestptr, nestptr = NULL, c = *(++ptr)) != CHAR_NULL)) &&
4907             (c != CHAR_RIGHT_SQUARE_BRACKET || inescq));             (c != CHAR_RIGHT_SQUARE_BRACKET || inescq));
4908    
4909      /* Check for missing terminating ']' */      /* Check for missing terminating ']' */
4910    
4911      if (c == 0)      if (c == CHAR_NULL)
4912        {        {
4913        *errorcodeptr = ERR6;        *errorcodeptr = ERR6;
4914        goto FAILED;        goto FAILED;
4915        }        }
4916    
4917      /* We will need an XCLASS if data has been placed in class_uchardata. In      /* We will need an XCLASS if data has been placed in class_uchardata. In
4918      the second phase this is a sufficient test. However, in the pre-compile      the second phase this is a sufficient test. However, in the pre-compile
4919      phase, class_uchardata gets emptied to prevent workspace overflow, so it      phase, class_uchardata gets emptied to prevent workspace overflow, so it
4920      only if the very last character in the class needs XCLASS will it contain      only if the very last character in the class needs XCLASS will it contain
4921      anything at this point. For this reason, xclass gets set TRUE above when      anything at this point. For this reason, xclass gets set TRUE above when
4922      uchar_classdata is emptied, and that's why this code is the way it is here      uchar_classdata is emptied, and that's why this code is the way it is here
4923      instead of just doing a test on class_uchardata below. */      instead of just doing a test on class_uchardata below. */
4924    
4925  #if defined SUPPORT_UTF || !defined COMPILE_PCRE8  #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
4926      if (class_uchardata > class_uchardata_base) xclass = TRUE;      if (class_uchardata > class_uchardata_base) xclass = TRUE;
4927  #endif  #endif
# Line 4618  for (;; ptr++) Line 4930  for (;; ptr++)
4930      setting, whatever the repeat count. Any reqchar setting must remain      setting, whatever the repeat count. Any reqchar setting must remain
4931      unchanged after any kind of repeat. */      unchanged after any kind of repeat. */
4932    
4933      if (firstchar == REQ_UNSET) firstchar = REQ_NONE;      if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
4934      zerofirstchar = firstchar;      zerofirstchar = firstchar;
4935        zerofirstcharflags = firstcharflags;
4936      zeroreqchar = reqchar;      zeroreqchar = reqchar;
4937        zeroreqcharflags = reqcharflags;
4938    
4939      /* If there are characters with values > 255, we have to compile an      /* If there are characters with values > 255, we have to compile an
4940      extended class, with its own opcode, unless there was a negated special      extended class, with its own opcode, unless there was a negated special
# Line 4676  for (;; ptr++) Line 4990  for (;; ptr++)
4990        memcpy(code, classbits, 32);        memcpy(code, classbits, 32);
4991        }        }
4992      code += 32 / sizeof(pcre_uchar);      code += 32 / sizeof(pcre_uchar);
4993    
4994      END_CLASS:      END_CLASS:
4995      break;      break;
4996    
# Line 4715  for (;; ptr++) Line 5029  for (;; ptr++)
5029      if (repeat_min == 0)      if (repeat_min == 0)
5030        {        {
5031        firstchar = zerofirstchar;    /* Adjust for zero repeat */        firstchar = zerofirstchar;    /* Adjust for zero repeat */
5032          firstcharflags = zerofirstcharflags;
5033        reqchar = zeroreqchar;        /* Ditto */        reqchar = zeroreqchar;        /* Ditto */
5034          reqcharflags = zeroreqcharflags;
5035        }        }
5036    
5037      /* Remember whether this is a variable length repeat */      /* Remember whether this is a variable length repeat */
# Line 4818  for (;; ptr++) Line 5134  for (;; ptr++)
5134          {          {
5135          c = code[-1];          c = code[-1];
5136          if (*previous <= OP_CHARI && repeat_min > 1)          if (*previous <= OP_CHARI && repeat_min > 1)
5137            reqchar = c | req_caseopt | cd->req_varyopt;            {
5138          }            reqchar = c;
5139              reqcharflags = req_caseopt | cd->req_varyopt;
5140        /* If the repetition is unlimited, it pays to see if the next thing on            }
       the line is something that cannot possibly match this character. If so,  
       automatically possessifying this item gains some performance in the case  
       where the match fails. */  
   
       if (!possessive_quantifier &&  
           repeat_max < 0 &&  
           check_auto_possessive(previous, utf, ptr + 1, options, cd))  
         {  
         repeat_type = 0;    /* Force greedy */  
         possessive_quantifier = TRUE;  
5141          }          }
5142    
5143        goto OUTPUT_SINGLE_REPEAT;   /* Code shared with single character types */        goto OUTPUT_SINGLE_REPEAT;   /* Code shared with single character types */
# Line 4851  for (;; ptr++) Line 5157  for (;; ptr++)
5157        op_type = OP_TYPESTAR - OP_STAR;  /* Use type opcodes */        op_type = OP_TYPESTAR - OP_STAR;  /* Use type opcodes */
5158        c = *previous;        c = *previous;
5159    
       if (!possessive_quantifier &&  
           repeat_max < 0 &&  
           check_auto_possessive(previous, utf, ptr + 1, options, cd))  
         {  
         repeat_type = 0;    /* Force greedy */  
         possessive_quantifier = TRUE;  
         }  
   
5160        OUTPUT_SINGLE_REPEAT:        OUTPUT_SINGLE_REPEAT:
5161        if (*previous == OP_PROP || *previous == OP_NOTPROP)        if (*previous == OP_PROP || *previous == OP_NOTPROP)
5162          {          {
# Line 4875  for (;; ptr++) Line 5173  for (;; ptr++)
5173    
5174        if (repeat_max == 0) goto END_REPEAT;        if (repeat_max == 0) goto END_REPEAT;
5175    
       /*--------------------------------------------------------------------*/  
       /* This code is obsolete from release 8.00; the restriction was finally  
       removed: */  
   
       /* All real repeats make it impossible to handle partial matching (maybe  
       one day we will be able to remove this restriction). */  
   
       /* if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL; */  
       /*--------------------------------------------------------------------*/  
   
5176        /* Combine the op_type with the repeat_type */        /* Combine the op_type with the repeat_type */
5177    
5178        repeat_type += op_type;        repeat_type += op_type;
# Line 5017  for (;; ptr++) Line 5305  for (;; ptr++)
5305      /* If previous was a character class or a back reference, we put the repeat      /* If previous was a character class or a back reference, we put the repeat
5306      stuff after it, but just skip the item if the repeat was {0,0}. */      stuff after it, but just skip the item if the repeat was {0,0}. */
5307    
5308      else if (*previous == OP_CLASS ||      else if (*previous == OP_CLASS || *previous == OP_NCLASS ||
              *previous == OP_NCLASS ||  
5309  #if defined SUPPORT_UTF || !defined COMPILE_PCRE8  #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
5310               *previous == OP_XCLASS ||               *previous == OP_XCLASS ||
5311  #endif  #endif
5312               *previous == OP_REF ||               *previous == OP_REF   || *previous == OP_REFI ||
5313               *previous == OP_REFI)               *previous == OP_DNREF || *previous == OP_DNREFI)
5314        {        {
5315        if (repeat_max == 0)        if (repeat_max == 0)
5316          {          {
# Line 5031  for (;; ptr++) Line 5318  for (;; ptr++)
5318          goto END_REPEAT;          goto END_REPEAT;
5319          }          }
5320    
       /*--------------------------------------------------------------------*/  
       /* This code is obsolete from release 8.00; the restriction was finally  
       removed: */  
   
       /* All real repeats make it impossible to handle partial matching (maybe  
       one day we will be able to remove this restriction). */  
   
       /* if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL; */  
       /*--------------------------------------------------------------------*/  
   
5321        if (repeat_min == 0 && repeat_max == -1)        if (repeat_min == 0 && repeat_max == -1)
5322          *code++ = OP_CRSTAR + repeat_type;          *code++ = OP_CRSTAR + repeat_type;
5323        else if (repeat_min == 1 && repeat_max == -1)        else if (repeat_min == 1 && repeat_max == -1)
# Line 5200  for (;; ptr++) Line 5477  for (;; ptr++)
5477    
5478            else            else
5479              {              {
5480              if (groupsetfirstchar && reqchar < 0) reqchar = firstchar;              if (groupsetfirstchar && reqcharflags < 0)
5481                  {
5482                  reqchar = firstchar;
5483                  reqcharflags = firstcharflags;
5484                  }
5485    
5486              for (i = 1; i < repeat_min; i++)              for (i = 1; i < repeat_min; i++)
5487                {                {
# Line 5379  for (;; ptr++) Line 5660  for (;; ptr++)
5660              pcre_uchar *scode = bracode;              pcre_uchar *scode = bracode;
5661              do              do
5662                {                {
5663                if (could_be_empty_branch(scode, ketcode, utf, cd))                if (could_be_empty_branch(scode, ketcode, utf, cd, NULL))
5664                  {                  {
5665                  *bracode += OP_SBRA - OP_BRA;                  *bracode += OP_SBRA - OP_BRA;
5666                  break;                  break;
# Line 5479  for (;; ptr++) Line 5760  for (;; ptr++)
5760        else if (*tempcode == OP_EXACT || *tempcode == OP_NOTEXACT)        else if (*tempcode == OP_EXACT || *tempcode == OP_NOTEXACT)
5761          {          {
5762          tempcode += PRIV(OP_lengths)[*tempcode];          tempcode += PRIV(OP_lengths)[*tempcode];
5763  #if defined SUPPORT_UTF && !defined COMPILE_PCRE32  #ifdef SUPPORT_UTF
5764          if (utf && HAS_EXTRALEN(tempcode[-1]))          if (utf && HAS_EXTRALEN(tempcode[-1]))
5765            tempcode += GET_EXTRALEN(tempcode[-1]);            tempcode += GET_EXTRALEN(tempcode[-1]);
5766  #endif  #endif
# Line 5575  for (;; ptr++) Line 5856  for (;; ptr++)
5856        if (*ptr == CHAR_COLON)        if (*ptr == CHAR_COLON)
5857          {          {
5858          arg = ++ptr;          arg = ++ptr;
5859          while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;          while (*ptr != CHAR_NULL && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
5860          arglen = (int)(ptr - arg);          arglen = (int)(ptr - arg);
5861          if ((unsigned int)arglen > MAX_MARK)          if ((unsigned int)arglen > MAX_MARK)
5862            {            {
# Line 5620  for (;; ptr++) Line 5901  for (;; ptr++)
5901                (cd->assert_depth > 0)? OP_ASSERT_ACCEPT : OP_ACCEPT;                (cd->assert_depth > 0)? OP_ASSERT_ACCEPT : OP_ACCEPT;
5902    
5903              /* Do not set firstchar after *ACCEPT */              /* Do not set firstchar after *ACCEPT */
5904              if (firstchar == REQ_UNSET) firstchar = REQ_NONE;              if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
5905              }              }
5906    
5907            /* Handle other cases with/without an argument */            /* Handle other cases with/without an argument */
# Line 5689  for (;; ptr++) Line 5970  for (;; ptr++)
5970          {          {
5971          case CHAR_NUMBER_SIGN:                 /* Comment; skip to ket */          case CHAR_NUMBER_SIGN:                 /* Comment; skip to ket */
5972          ptr++;          ptr++;
5973          while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;          while (*ptr != CHAR_NULL && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
5974          if (*ptr == 0)          if (*ptr == CHAR_NULL)
5975            {            {
5976            *errorcodeptr = ERR18;            *errorcodeptr = ERR18;
5977            goto FAILED;            goto FAILED;
# Line 5713  for (;; ptr++) Line 5994  for (;; ptr++)
5994          /* ------------------------------------------------------------ */          /* ------------------------------------------------------------ */
5995          case CHAR_LEFT_PARENTHESIS:          case CHAR_LEFT_PARENTHESIS:
5996          bravalue = OP_COND;       /* Conditional group */          bravalue = OP_COND;       /* Conditional group */
5997            tempptr = ptr;
5998    
5999          /* A condition can be an assertion, a number (referring to a numbered          /* A condition can be an assertion, a number (referring to a numbered
6000          group), a name (referring to a named group), or 'R', referring to          group), a name (referring to a named group), or 'R', referring to
# Line 5725  for (;; ptr++) Line 6007  for (;; ptr++)
6007          be the recursive thing or the name 'R' (and similarly for 'R' followed          be the recursive thing or the name 'R' (and similarly for 'R' followed
6008          by digits), and (b) a number could be a name that consists of digits.          by digits), and (b) a number could be a name that consists of digits.
6009          In both cases, we look for a name first; if not found, we try the other          In both cases, we look for a name first; if not found, we try the other
6010          cases. */          cases.
6011    
6012            For compatibility with auto-callouts, we allow a callout to be
6013            specified before a condition that is an assertion. First, check for the
6014            syntax of a callout; if found, adjust the temporary pointer that is
6015            used to check for an assertion condition. That's all that is needed! */
6016    
6017            if (ptr[1] == CHAR_QUESTION_MARK && ptr[2] == CHAR_C)
6018              {
6019              for (i = 3;; i++) if (!IS_DIGIT(ptr[i])) break;
6020              if (ptr[i] == CHAR_RIGHT_PARENTHESIS)
6021                tempptr += i + 1;
6022              }
6023    
6024          /* For conditions that are assertions, check the syntax, and then exit          /* For conditions that are assertions, check the syntax, and then exit
6025          the switch. This will take control down to where bracketed groups,          the switch. This will take control down to where bracketed groups,
6026          including assertions, are processed. */          including assertions, are processed. */
6027    
6028          if (ptr[1] == CHAR_QUESTION_MARK && (ptr[2] == CHAR_EQUALS_SIGN ||          if (tempptr[1] == CHAR_QUESTION_MARK &&
6029              ptr[2] == CHAR_EXCLAMATION_MARK || ptr[2] == CHAR_LESS_THAN_SIGN))                (tempptr[2] == CHAR_EQUALS_SIGN ||
6030                   tempptr[2] == CHAR_EXCLAMATION_MARK ||
6031                   tempptr[2] == CHAR_LESS_THAN_SIGN))
6032            break;            break;
6033    
6034          /* Most other conditions use OP_CREF (a couple change to OP_RREF          /* Most other conditions use OP_CREF (a couple change to OP_RREF
# Line 5766  for (;; ptr++) Line 6062  for (;; ptr++)
6062            }            }
6063          else          else
6064            {            {
6065            terminator = 0;            terminator = CHAR_NULL;
6066            if (ptr[1] == CHAR_MINUS || ptr[1] == CHAR_PLUS) refsign = *(++ptr);            if (ptr[1] == CHAR_MINUS || ptr[1] == CHAR_PLUS) refsign = *(++ptr);
6067            }            }
6068    
# Line 5786  for (;; ptr++) Line 6082  for (;; ptr++)
6082          while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_word) != 0)          while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_word) != 0)
6083            {            {
6084            if (recno >= 0)            if (recno >= 0)
6085              recno = (IS_DIGIT(*ptr))? recno * 10 + *ptr - CHAR_0 : -1;              recno = (IS_DIGIT(*ptr))? recno * 10 + (int)(*ptr - CHAR_0) : -1;
6086            ptr++;            ptr++;
6087            }            }
6088          namelen = (int)(ptr - name);          namelen = (int)(ptr - name);
6089    
6090          if ((terminator > 0 && *ptr++ != terminator) ||          if ((terminator > 0 && *ptr++ != (pcre_uchar)terminator) ||
6091              *ptr++ != CHAR_RIGHT_PARENTHESIS)              *ptr++ != CHAR_RIGHT_PARENTHESIS)
6092            {            {
6093            ptr--;      /* Error offset */            ptr--;      /* Error offset */
# Line 5838  for (;; ptr++) Line 6134  for (;; ptr++)
6134            slot += cd->name_entry_size;            slot += cd->name_entry_size;
6135            }            }
6136    
6137          /* Found a previous named subpattern */          /* Found the named subpattern */
6138    
6139          if (i < cd->names_found)          if (i < cd->names_found)
6140            {            {
# Line 5847  for (;; ptr++) Line 6143  for (;; ptr++)
6143            code[1+LINK_SIZE]++;            code[1+LINK_SIZE]++;
6144            }            }
6145    
6146          /* Search the pattern for a forward reference */          /* If terminator == CHAR_NULL it means that the name followed directly
6147            after the opening parenthesis [e.g. (?(abc)...] and in this case there
6148          else if ((i = find_parens(cd, name, namelen,          are some further alternatives to try. For the cases where terminator !=
6149                          (options & PCRE_EXTENDED) != 0, utf)) > 0)          0 [things like (?(<name>... or (?('name')... or (?(R&name)... ] we have
           {  
           PUT2(code, 2+LINK_SIZE, i);  
           code[1+LINK_SIZE]++;  
           }  
   
         /* If terminator == 0 it means that the name followed directly after  
         the opening parenthesis [e.g. (?(abc)...] and in this case there are  
         some further alternatives to try. For the cases where terminator != 0  
         [things like (?(<name>... or (?('name')... or (?(R&name)... ] we have  
6150          now checked all the possibilities, so give an error. */          now checked all the possibilities, so give an error. */
6151    
6152          else if (terminator != 0)          else if (terminator != CHAR_NULL)
6153            {            {
6154            *errorcodeptr = ERR15;            *errorcodeptr = ERR15;
6155            goto FAILED;            goto FAILED;
# Line 6019  for (;; ptr++) Line 6306  for (;; ptr++)
6306          /* ------------------------------------------------------------ */          /* ------------------------------------------------------------ */
6307          DEFINE_NAME:    /* Come here from (?< handling */          DEFINE_NAME:    /* Come here from (?< handling */
6308          case CHAR_APOSTROPHE:          case CHAR_APOSTROPHE:
6309            terminator = (*ptr == CHAR_LESS_THAN_SIGN)?
6310              CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE;
6311            name = ++ptr;
6312    
6313            while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_word) != 0) ptr++;
6314            namelen = (int)(ptr - name);
6315    
6316            /* In the pre-compile phase, do a syntax check, remember the longest
6317            name, and then remember the group in a vector, expanding it if
6318            necessary. Duplicates for the same number are skipped; other duplicates
6319            are checked for validity. In the actual compile, there is nothing to
6320            do. */
6321    
6322            if (lengthptr != NULL)
6323            {            {
6324            terminator = (*ptr == CHAR_LESS_THAN_SIGN)?            named_group *ng;
6325              CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE;            pcre_uint32 number = cd->bracount + 1;
           name = ++ptr;  
6326    
6327            while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_word) != 0) ptr++;            if (*ptr != (pcre_uchar)terminator)
6328            namelen = (int)(ptr - name);              {
6329                *errorcodeptr = ERR42;
6330                goto FAILED;
6331                }
6332    
6333            /* In the pre-compile phase, just do a syntax check. */            if (cd->names_found >= MAX_NAME_COUNT)
6334                {
6335                *errorcodeptr = ERR49;
6336                goto FAILED;
6337                }
6338    
6339            if (lengthptr != NULL)            if (namelen + IMM2_SIZE + 1 > cd->name_entry_size)
6340              {              {
6341              if (*ptr != terminator)              cd->name_entry_size = namelen + IMM2_SIZE + 1;
6342                {              if (namelen > MAX_NAME_SIZE)
               *errorcodeptr = ERR42;  
               goto FAILED;  
               }  
             if (cd->names_found >= MAX_NAME_COUNT)  
6343                {                {
6344                *errorcodeptr = ERR49;                *errorcodeptr = ERR48;
6345                goto FAILED;                goto FAILED;
6346                }                }
6347              if (namelen + IMM2_SIZE + 1 > cd->name_entry_size)              }
6348    
6349              /* Scan the list to check for duplicates. For duplicate names, if the
6350              number is the same, break the loop, which causes the name to be
6351              discarded; otherwise, if DUPNAMES is not set, give an error.
6352              If it is set, allow the name with a different number, but continue
6353              scanning in case this is a duplicate with the same number. For
6354              non-duplicate names, give an error if the number is duplicated. */
6355    
6356              ng = cd->named_groups;
6357              for (i = 0; i < cd->names_found; i++, ng++)
6358                {
6359                if (namelen == ng->length &&
6360                    STRNCMP_UC_UC(name, ng->name, namelen) == 0)
6361                {                {
6362                cd->name_entry_size = namelen + IMM2_SIZE + 1;                if (ng->number == number) break;
6363                if (namelen > MAX_NAME_SIZE)                if ((options & PCRE_DUPNAMES) == 0)
6364                  {                  {
6365                  *errorcodeptr = ERR48;                  *errorcodeptr = ERR43;
6366                  goto FAILED;                  goto FAILED;
6367                  }                  }
6368                  cd->dupnames = TRUE;  /* Duplicate names exist */
6369                  }
6370                else if (ng->number == number)
6371                  {
6372                  *errorcodeptr = ERR65;
6373                  goto FAILED;
6374                }                }
6375              }              }
6376    
6377            /* In the real compile, create the entry in the table, maintaining            if (i >= cd->names_found)     /* Not a duplicate with same number */
           alphabetical order. Duplicate names for different numbers are  
           permitted only if PCRE_DUPNAMES is set. Duplicate names for the same  
           number are always OK. (An existing number can be re-used if (?|  
           appears in the pattern.) In either event, a duplicate name results in  
           a duplicate entry in the table, even if the number is the same. This  
           is because the number of names, and hence the table size, is computed  
           in the pre-compile, and it affects various numbers and pointers which  
           would all have to be modified, and the compiled code moved down, if  
           duplicates with the same number were omitted from the table. This  
           doesn't seem worth the hassle. However, *different* names for the  
           same number are not permitted. */  
   
           else  
6378              {              {
6379              BOOL dupname = FALSE;              /* Increase the list size if necessary */
             slot = cd->name_table;  
6380    
6381              for (i = 0; i < cd->names_found; i++)              if (cd->names_found >= cd->named_group_list_size)
6382                {                {
6383                int crc = memcmp(name, slot+IMM2_SIZE, IN_UCHARS(namelen));                int newsize = cd->named_group_list_size * 2;
6384                if (crc == 0)                named_group *newspace = (PUBL(malloc))
6385                  {                  (newsize * sizeof(named_group));
                 if (slot[IMM2_SIZE+namelen] == 0)  
                   {  
                   if (GET2(slot, 0) != cd->bracount + 1 &&  
                       (options & PCRE_DUPNAMES) == 0)  
                     {  
                     *errorcodeptr = ERR43;  
                     goto FAILED;  
                     }  
                   else dupname = TRUE;  
                   }  
                 else crc = -1;      /* Current name is a substring */  
                 }  
6386    
6387                /* Make space in the table and break the loop for an earlier                if (newspace == NULL)
               name. For a duplicate or later name, carry on. We do this for  
               duplicates so that in the simple case (when ?(| is not used) they  
               are in order of their numbers. */  
   
               if (crc < 0)  
6388                  {                  {
6389                  memmove(slot + cd->name_entry_size, slot,                  *errorcodeptr = ERR21;
6390                    IN_UCHARS((cd->names_found - i) * cd->name_entry_size));                  goto FAILED;
                 break;  
6391                  }                  }
6392    
6393                /* Continue the loop for a later or duplicate name */                memcpy(newspace, cd->named_groups,
6394                    cd->named_group_list_size * sizeof(named_group));
6395                slot += cd->name_entry_size;                if (cd->named_group_list_size > NAMED_GROUP_LIST_SIZE)
6396                }                  (PUBL(free))((void *)cd->named_groups);
6397                  cd->named_groups = newspace;
6398              /* For non-duplicate names, check for a duplicate number before                cd->named_group_list_size = newsize;
             adding the new name. */  
   
             if (!dupname)  
               {  
               pcre_uchar *cslot = cd->name_table;  
               for (i = 0; i < cd->names_found; i++)  
                 {  
                 if (cslot != slot)  
                   {  
                   if (GET2(cslot, 0) == cd->bracount + 1)  
                     {  
                     *errorcodeptr = ERR65;  
                     goto FAILED;  
                     }  
                   }  
                 else i--;  
                 cslot += cd->name_entry_size;  
                 }  
6399                }                }
6400    
6401              PUT2(slot, 0, cd->bracount + 1);              cd->named_groups[cd->names_found].name = name;
6402              memcpy(slot + IMM2_SIZE, name, IN_UCHARS(namelen));              cd->named_groups[cd->names_found].length = namelen;
6403              slot[IMM2_SIZE + namelen] = 0;              cd->named_groups[cd->names_found].number = number;
6404                cd->names_found++;
6405              }              }
6406            }            }
6407    
6408          /* In both pre-compile and compile, count the number of names we've          ptr++;                    /* Move past > or ' in both passes. */
         encountered. */  
   
         cd->names_found++;  
         ptr++;                    /* Move past > or ' */  
6409          goto NUMBERED_GROUP;          goto NUMBERED_GROUP;
6410    
6411    
# Line 6166  for (;; ptr++) Line 6435  for (;; ptr++)
6435    
6436          if (lengthptr != NULL)          if (lengthptr != NULL)
6437            {            {
6438            const pcre_uchar *temp;            named_group *ng;
6439    
6440            if (namelen == 0)            if (namelen == 0)
6441              {              {
6442              *errorcodeptr = ERR62;              *errorcodeptr = ERR62;
6443              goto FAILED;              goto FAILED;
6444              }              }
6445            if (*ptr != terminator)            if (*ptr != (pcre_uchar)terminator)
6446              {              {
6447              *errorcodeptr = ERR42;              *errorcodeptr = ERR42;
6448              goto FAILED;              goto FAILED;
# Line 6184  for (;; ptr++) Line 6453  for (;; ptr++)
6453              goto FAILED;              goto FAILED;
6454              }              }
6455    
6456            /* The name table does not exist in the first pass, so we cannot            /* The name table does not exist in the first pass; instead we must
6457            do a simple search as in the code below. Instead, we have to scan the            scan the list of names encountered so far in order to get the
6458            pattern to find the number. It is important that we scan it only as            number. If the name is not found, set the value to 0 for a forward
6459            far as we have got because the syntax of named subpatterns has not            reference. */
6460            been checked for the rest of the pattern, and find_parens() assumes  
6461            correct syntax. In any case, it's a waste of resources to scan            ng = cd->named_groups;
6462            further. We stop the scan at the current point by temporarily            for (i = 0; i < cd->names_found; i++, ng++)
6463            adjusting the value of cd->endpattern. */              {
6464                if (namelen == ng->length &&
6465            temp = cd->end_pattern;                  STRNCMP_UC_UC(name, ng->name, namelen) == 0)
6466            cd->end_pattern = ptr;                break;
6467            recno = find_parens(cd, name, namelen,              }
6468              (options & PCRE_EXTENDED) != 0, utf);            recno = (i < cd->names_found)? ng->number : 0;
6469            cd->end_pattern = temp;  
6470            if (recno < 0) recno = 0;    /* Forward ref; set dummy number */            /* Count named back references. */
6471    
6472              if (!is_recurse) cd->namedrefcount++;
6473            }            }
6474    
6475          /* In the real compile, seek the name in the table. We check the name          /* In the real compile, search the name table. We check the name
6476          first, and then check that we have reached the end of the name in the          first, and then check that we have reached the end of the name in the
6477          table. That way, if the name that is longer than any in the table,          table. That way, if the name is longer than any in the table, the
6478          the comparison will fail without reading beyond the table entry. */          comparison will fail without reading beyond the table entry. */
6479    
6480          else          else
6481            {            {
# Line 6217  for (;; ptr++) Line 6488  for (;; ptr++)
6488              slot += cd->name_entry_size;              slot += cd->name_entry_size;
6489              }              }
6490    
6491            if (i < cd->names_found)         /* Back reference */            if (i < cd->names_found)
6492              {              {
6493              recno = GET2(slot, 0);              recno = GET2(slot, 0);
6494              }              }
6495            else if ((recno =                /* Forward back reference */            else
                     find_parens(cd, name, namelen,  
                       (options & PCRE_EXTENDED) != 0, utf)) <= 0)  
6496              {              {
6497              *errorcodeptr = ERR15;              *errorcodeptr = ERR15;
6498              goto FAILED;              goto FAILED;
6499              }              }
6500            }            }
6501    
6502          /* In both phases, we can now go to the code than handles numerical          /* In both phases, for recursions, we can now go to the code than
6503          recursion or backreferences. */          handles numerical recursion. */
6504    
6505          if (is_recurse) goto HANDLE_RECURSION;          if (is_recurse) goto HANDLE_RECURSION;
6506            else goto HANDLE_REFERENCE;  
6507            /* In the second pass we must see if the name is duplicated. If so, we
6508            generate a different opcode. */
6509    
6510            if (lengthptr == NULL && cd->dupnames)
6511              {
6512              int count = 1;
6513              unsigned int index = i;
6514              pcre_uchar *cslot = slot + cd->name_entry_size;
6515    
6516              for (i++; i < cd->names_found; i++)
6517                {
6518                if (STRCMP_UC_UC(slot + IMM2_SIZE, cslot + IMM2_SIZE) != 0) break;
6519                count++;
6520                cslot += cd->name_entry_size;
6521                }
6522    
6523              if (count > 1)
6524                {
6525                if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
6526                previous = code;
6527                *code++ = ((options & PCRE_CASELESS) != 0)? OP_DNREFI : OP_DNREF;
6528                PUT2INC(code, 0, index);
6529                PUT2INC(code, 0, count);
6530    
6531                /* Process each potentially referenced group. */
6532    
6533                for (; slot < cslot; slot += cd->name_entry_size)
6534                  {
6535                  open_capitem *oc;
6536                  recno = GET2(slot, 0);
6537                  cd->backref_map |= (recno < 32)? (1 << recno) : 1;
6538                  if (recno > cd->top_backref) cd->top_backref = recno;
6539    
6540                  /* Check to see if this back reference is recursive, that it, it
6541                  is inside the group that it references. A flag is set so that the
6542                  group can be made atomic. */
6543    
6544                  for (oc = cd->open_caps; oc != NULL; oc = oc->next)
6545                    {
6546                    if (oc->number == recno)
6547                      {
6548                      oc->flag = TRUE;
6549                      break;
6550                      }
6551                    }
6552                  }
6553    
6554                continue;  /* End of back ref handling */
6555                }
6556              }
6557    
6558            /* First pass, or a non-duplicated name. */
6559    
6560            goto HANDLE_REFERENCE;
6561    
6562    
6563          /* ------------------------------------------------------------ */          /* ------------------------------------------------------------ */
# Line 6279  for (;; ptr++) Line 6602  for (;; ptr++)
6602            while(IS_DIGIT(*ptr))            while(IS_DIGIT(*ptr))
6603              recno = recno * 10 + *ptr++ - CHAR_0;              recno = recno * 10 + *ptr++ - CHAR_0;
6604    
6605            if (*ptr != terminator)            if (*ptr != (pcre_uchar)terminator)
6606              {              {
6607              *errorcodeptr = ERR29;              *errorcodeptr = ERR29;
6608              goto FAILED;              goto FAILED;
# Line 6333  for (;; ptr++) Line 6656  for (;; ptr++)
6656    
6657              if (called == NULL)              if (called == NULL)
6658                {                {
6659                if (find_parens(cd, NULL, recno,                if (recno > cd->final_bracount)
                     (options & PCRE_EXTENDED) != 0, utf) < 0)  
6660                  {                  {
6661                  *errorcodeptr = ERR15;                  *errorcodeptr = ERR15;
6662                  goto FAILED;                  goto FAILED;
# Line 6383  for (;; ptr++) Line 6705  for (;; ptr++)
6705    
6706          /* Can't determine a first byte now */          /* Can't determine a first byte now */
6707    
6708          if (firstchar == REQ_UNSET) firstchar = REQ_NONE;          if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
6709          continue;          continue;
6710    
6711    
# Line 6517  for (;; ptr++) Line 6839  for (;; ptr++)
6839           cond_depth +           cond_depth +
6840             ((bravalue == OP_COND)?1:0),   /* Depth of condition subpatterns */             ((bravalue == OP_COND)?1:0),   /* Depth of condition subpatterns */
6841           &subfirstchar,                   /* For possible first char */           &subfirstchar,                   /* For possible first char */
6842             &subfirstcharflags,
6843           &subreqchar,                     /* For possible last char */           &subreqchar,                     /* For possible last char */
6844             &subreqcharflags,
6845           bcptr,                           /* Current branch chain */           bcptr,                           /* Current branch chain */
6846           cd,                              /* Tables block */           cd,                              /* Tables block */
6847           (lengthptr == NULL)? NULL :      /* Actual compile phase */           (lengthptr == NULL)? NULL :      /* Actual compile phase */
# Line 6578  for (;; ptr++) Line 6902  for (;; ptr++)
6902            *errorcodeptr = ERR27;            *errorcodeptr = ERR27;
6903            goto FAILED;            goto FAILED;
6904            }            }
6905          if (condcount == 1) subfirstchar = subreqchar = REQ_NONE;          if (condcount == 1) subfirstcharflags = subreqcharflags = REQ_NONE;
6906          }          }
6907        }        }
6908    
# Line 6627  for (;; ptr++) Line 6951  for (;; ptr++)
6951      back off. */      back off. */
6952    
6953      zeroreqchar = reqchar;      zeroreqchar = reqchar;
6954        zeroreqcharflags = reqcharflags;
6955      zerofirstchar = firstchar;      zerofirstchar = firstchar;
6956        zerofirstcharflags = firstcharflags;
6957      groupsetfirstchar = FALSE;      groupsetfirstchar = FALSE;
6958    
6959      if (bravalue >= OP_ONCE)      if (bravalue >= OP_ONCE)
# Line 6638  for (;; ptr++) Line 6964  for (;; ptr++)
6964        no firstchar, set "none" for the whole branch. In both cases, a zero        no firstchar, set "none" for the whole branch. In both cases, a zero
6965        repeat forces firstchar to "none". */        repeat forces firstchar to "none". */
6966    
6967        if (firstchar == REQ_UNSET)        if (firstcharflags == REQ_UNSET)
6968          {          {
6969          if (subfirstchar >= 0)          if (subfirstcharflags >= 0)
6970            {            {
6971            firstchar = subfirstchar;            firstchar = subfirstchar;
6972              firstcharflags = subfirstcharflags;
6973            groupsetfirstchar = TRUE;            groupsetfirstchar = TRUE;
6974            }            }
6975          else firstchar = REQ_NONE;          else firstcharflags = REQ_NONE;
6976          zerofirstchar = REQ_NONE;          zerofirstcharflags = REQ_NONE;
6977          }          }
6978    
6979        /* If firstchar was previously set, convert the subpattern's firstchar        /* If firstchar was previously set, convert the subpattern's firstchar
6980        into reqchar if there wasn't one, using the vary flag that was in        into reqchar if there wasn't one, using the vary flag that was in
6981        existence beforehand. */        existence beforehand. */
6982    
6983        else if (subfirstchar >= 0 && subreqchar < 0)        else if (subfirstcharflags >= 0 && subreqcharflags < 0)
6984          subreqchar = subfirstchar | tempreqvary;          {
6985            subreqchar = subfirstchar;
6986            subreqcharflags = subfirstcharflags | tempreqvary;