/[pcre]/code/trunk/pcre_compile.c
ViewVC logotype

Diff of /code/trunk/pcre_compile.c

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 500 by ph10, Sat Mar 6 19:00:29 2010 UTC revision 518 by ph10, Tue May 18 15:47:01 2010 UTC
# Line 92  is 4 there is plenty of room. */ Line 92  is 4 there is plenty of room. */
92    
93  #define COMPILE_WORK_SIZE (4096)  #define COMPILE_WORK_SIZE (4096)
94    
95    /* The overrun tests check for a slightly smaller size so that they detect the
96    overrun before it actually does run off the end of the data block. */
97    
98    #define WORK_SIZE_CHECK (COMPILE_WORK_SIZE - 100)
99    
100    
101  /* Table for handling escaped characters in the range '0'-'z'. Positive returns  /* Table for handling escaped characters in the range '0'-'z'. Positive returns
102  are simple data values; negative values are for special things like \d and so  are simple data values; negative values are for special things like \d and so
# Line 119  static const short int escapes[] = { Line 124  static const short int escapes[] = {
124       -ESC_H,                  0,       -ESC_H,                  0,
125       0,                       -ESC_K,       0,                       -ESC_K,
126       0,                       0,       0,                       0,
127       0,                       0,       -ESC_N,                  0,
128       -ESC_P,                  -ESC_Q,       -ESC_P,                  -ESC_Q,
129       -ESC_R,                  -ESC_S,       -ESC_R,                  -ESC_S,
130       0,                       0,       0,                       0,
# Line 166  static const short int escapes[] = { Line 171  static const short int escapes[] = {
171  /*  B8 */     0,     0,      0,       0,      0,   ']',    '=',    '-',  /*  B8 */     0,     0,      0,       0,      0,   ']',    '=',    '-',
172  /*  C0 */   '{',-ESC_A, -ESC_B,  -ESC_C, -ESC_D,-ESC_E,      0, -ESC_G,  /*  C0 */   '{',-ESC_A, -ESC_B,  -ESC_C, -ESC_D,-ESC_E,      0, -ESC_G,
173  /*  C8 */-ESC_H,     0,      0,       0,      0,     0,      0,      0,  /*  C8 */-ESC_H,     0,      0,       0,      0,     0,      0,      0,
174  /*  D0 */   '}',     0, -ESC_K,       0,      0,     0,      0, -ESC_P,  /*  D0 */   '}',     0, -ESC_K,       0,      0,-ESC_N,      0, -ESC_P,
175  /*  D8 */-ESC_Q,-ESC_R,      0,       0,      0,     0,      0,      0,  /*  D8 */-ESC_Q,-ESC_R,      0,       0,      0,     0,      0,      0,
176  /*  E0 */  '\\',     0, -ESC_S,       0,      0,-ESC_V, -ESC_W, -ESC_X,  /*  E0 */  '\\',     0, -ESC_S,       0,      0,-ESC_V, -ESC_W, -ESC_X,
177  /*  E8 */     0,-ESC_Z,      0,       0,      0,     0,      0,      0,  /*  E8 */     0,-ESC_Z,      0,       0,      0,     0,      0,      0,
# Line 183  string is built from string macros so th Line 188  string is built from string macros so th
188  platforms. */  platforms. */
189    
190  typedef struct verbitem {  typedef struct verbitem {
191    int   len;    int   len;                 /* Length of verb name */
192    int   op;    int   op;                  /* Op when no arg, or -1 if arg mandatory */
193      int   op_arg;              /* Op when arg present, or -1 if not allowed */
194  } verbitem;  } verbitem;
195    
196  static const char verbnames[] =  static const char verbnames[] =
197      "\0"                       /* Empty name is a shorthand for MARK */
198      STRING_MARK0
199    STRING_ACCEPT0    STRING_ACCEPT0
200    STRING_COMMIT0    STRING_COMMIT0
201    STRING_F0    STRING_F0
# Line 197  static const char verbnames[] = Line 205  static const char verbnames[] =
205    STRING_THEN;    STRING_THEN;
206    
207  static const verbitem verbs[] = {  static const verbitem verbs[] = {
208    { 6, OP_ACCEPT },    { 0, -1,        OP_MARK },
209    { 6, OP_COMMIT },    { 4, -1,        OP_MARK },
210    { 1, OP_FAIL },    { 6, OP_ACCEPT, -1 },
211    { 4, OP_FAIL },    { 6, OP_COMMIT, -1 },
212    { 5, OP_PRUNE },    { 1, OP_FAIL,   -1 },
213    { 4, OP_SKIP  },    { 4, OP_FAIL,   -1 },
214    { 4, OP_THEN  }    { 5, OP_PRUNE,  OP_PRUNE_ARG },
215      { 4, OP_SKIP,   OP_SKIP_ARG  },
216      { 4, OP_THEN,   OP_THEN_ARG  }
217  };  };
218    
219  static const int verbcount = sizeof(verbs)/sizeof(verbitem);  static const int verbcount = sizeof(verbs)/sizeof(verbitem);
# Line 251  static const int posix_class_maps[] = { Line 261  static const int posix_class_maps[] = {
261    cbit_xdigit,-1,          0              /* xdigit */    cbit_xdigit,-1,          0              /* xdigit */
262  };  };
263    
264    /* Table of substitutes for \d etc when PCRE_UCP is set. The POSIX class
265    substitutes must be in the order of the names, defined above, and there are
266    both positive and negative cases. NULL means no substitute. */
267    
268    #ifdef SUPPORT_UCP
269    static const uschar *substitutes[] = {
270      (uschar *)"\\P{Nd}",    /* \D */
271      (uschar *)"\\p{Nd}",    /* \d */
272      (uschar *)"\\P{Xsp}",   /* \S */       /* NOTE: Xsp is Perl space */
273      (uschar *)"\\p{Xsp}",   /* \s */
274      (uschar *)"\\P{Xwd}",   /* \W */
275      (uschar *)"\\p{Xwd}"    /* \w */
276    };
277    
278    static const uschar *posix_substitutes[] = {
279      (uschar *)"\\p{L}",     /* alpha */
280      (uschar *)"\\p{Ll}",    /* lower */
281      (uschar *)"\\p{Lu}",    /* upper */
282      (uschar *)"\\p{Xan}",   /* alnum */
283      NULL,                   /* ascii */
284      (uschar *)"\\h",        /* blank */
285      NULL,                   /* cntrl */
286      (uschar *)"\\p{Nd}",    /* digit */
287      NULL,                   /* graph */
288      NULL,                   /* print */
289      NULL,                   /* punct */
290      (uschar *)"\\p{Xps}",   /* space */    /* NOTE: Xps is POSIX space */
291      (uschar *)"\\p{Xwd}",   /* word */
292      NULL,                   /* xdigit */
293      /* Negated cases */
294      (uschar *)"\\P{L}",     /* ^alpha */
295      (uschar *)"\\P{Ll}",    /* ^lower */
296      (uschar *)"\\P{Lu}",    /* ^upper */
297      (uschar *)"\\P{Xan}",   /* ^alnum */
298      NULL,                   /* ^ascii */
299      (uschar *)"\\H",        /* ^blank */
300      NULL,                   /* ^cntrl */
301      (uschar *)"\\P{Nd}",    /* ^digit */
302      NULL,                   /* ^graph */
303      NULL,                   /* ^print */
304      NULL,                   /* ^punct */
305      (uschar *)"\\P{Xps}",   /* ^space */   /* NOTE: Xps is POSIX space */
306      (uschar *)"\\P{Xwd}",   /* ^word */
307      NULL                    /* ^xdigit */
308    };
309    #define POSIX_SUBSIZE (sizeof(posix_substitutes)/sizeof(uschar *))
310    #endif
311    
312  #define STRING(a)  # a  #define STRING(a)  # a
313  #define XSTRING(s) STRING(s)  #define XSTRING(s) STRING(s)
# Line 263  the number of relocations needed when a Line 320  the number of relocations needed when a
320  it is now one long string. We cannot use a table of offsets, because the  it is now one long string. We cannot use a table of offsets, because the
321  lengths of inserts such as XSTRING(MAX_NAME_SIZE) are not known. Instead, we  lengths of inserts such as XSTRING(MAX_NAME_SIZE) are not known. Instead, we
322  simply count through to the one we want - this isn't a performance issue  simply count through to the one we want - this isn't a performance issue
323  because these strings are used only when there is a compilation error.  because these strings are used only when there is a compilation error.
324    
325  Each substring ends with \0 to insert a null character. This includes the final  Each substring ends with \0 to insert a null character. This includes the final
326  substring, so that the whole string ends with \0\0, which can be detected when  substring, so that the whole string ends with \0\0, which can be detected when
327  counting through. */  counting through. */
328    
329  static const char error_texts[] =  static const char error_texts[] =
# Line 314  static const char error_texts[] = Line 371  static const char error_texts[] =
371    /* 35 */    /* 35 */
372    "invalid condition (?(0)\0"    "invalid condition (?(0)\0"
373    "\\C not allowed in lookbehind assertion\0"    "\\C not allowed in lookbehind assertion\0"
374    "PCRE does not support \\L, \\l, \\N, \\U, or \\u\0"    "PCRE does not support \\L, \\l, \\N{name}, \\U, or \\u\0"
375    "number after (?C is > 255\0"    "number after (?C is > 255\0"
376    "closing ) for (?C expected\0"    "closing ) for (?C expected\0"
377    /* 40 */    /* 40 */
# Line 340  static const char error_texts[] = Line 397  static const char error_texts[] =
397    "inconsistent NEWLINE options\0"    "inconsistent NEWLINE options\0"
398    "\\g is not followed by a braced, angle-bracketed, or quoted name/number or by a plain number\0"    "\\g is not followed by a braced, angle-bracketed, or quoted name/number or by a plain number\0"
399    "a numbered reference must not be zero\0"    "a numbered reference must not be zero\0"
400    "(*VERB) with an argument is not supported\0"    "an argument is not allowed for (*ACCEPT), (*FAIL), or (*COMMIT)\0"
401    /* 60 */    /* 60 */
402    "(*VERB) not recognized\0"    "(*VERB) not recognized\0"
403    "number is too big\0"    "number is too big\0"
# Line 348  static const char error_texts[] = Line 405  static const char error_texts[] =
405    "digit expected after (?+\0"    "digit expected after (?+\0"
406    "] is an invalid data character in JavaScript compatibility mode\0"    "] is an invalid data character in JavaScript compatibility mode\0"
407    /* 65 */    /* 65 */
408    "different names for subpatterns of the same number are not allowed\0";    "different names for subpatterns of the same number are not allowed\0"
409      "(*MARK) must have an argument\0"
410      "this version of PCRE is not compiled with PCRE_UCP support\0"
411      ;
412    
413  /* Table to identify digits and hex digits. This is used when compiling  /* Table to identify digits and hex digits. This is used when compiling
414  patterns. Note that the tables in chartables are dependent on the locale, and  patterns. Note that the tables in chartables are dependent on the locale, and
# Line 506  static const char * Line 566  static const char *
566  find_error_text(int n)  find_error_text(int n)
567  {  {
568  const char *s = error_texts;  const char *s = error_texts;
569  for (; n > 0; n--)  for (; n > 0; n--)
570    {    {
571    while (*s++ != 0) {};    while (*s++ != 0) {};
572    if (*s == 0) return "Error text not found (please report)";    if (*s == 0) return "Error text not found (please report)";
573    }    }
574  return s;  return s;
575  }  }
576    
# Line 581  else Line 641  else
641    
642      case CHAR_l:      case CHAR_l:
643      case CHAR_L:      case CHAR_L:
     case CHAR_N:  
644      case CHAR_u:      case CHAR_u:
645      case CHAR_U:      case CHAR_U:
646      *errorcodeptr = ERR37;      *errorcodeptr = ERR37;
# Line 819  else Line 878  else
878      }      }
879    }    }
880    
881    /* Perl supports \N{name} for character names, as well as plain \N for "not
882    newline". PCRE does not support \N{name}. */
883    
884    if (c == -ESC_N && ptr[1] == CHAR_LEFT_CURLY_BRACKET)
885      *errorcodeptr = ERR37;
886    
887    /* If PCRE_UCP is set, we change the values for \d etc. */
888    
889    if ((options & PCRE_UCP) != 0 && c <= -ESC_D && c >= -ESC_w)
890      c -= (ESC_DU - ESC_D);
891    
892    /* Set the pointer to the final character before returning. */
893    
894  *ptrptr = ptr;  *ptrptr = ptr;
895  return c;  return c;
896  }  }
# Line 1610  for (;;) Line 1682  for (;;)
1682    
1683    /* Otherwise, we can get the item's length from the table, except that for    /* Otherwise, we can get the item's length from the table, except that for
1684    repeated character types, we have to test for \p and \P, which have an extra    repeated character types, we have to test for \p and \P, which have an extra
1685    two bytes of parameters. */    two bytes of parameters, and for MARK/PRUNE/SKIP/THEN with an argument, we
1686      must add in its length. */
1687    
1688    else    else
1689      {      {
# Line 1634  for (;;) Line 1707  for (;;)
1707        case OP_TYPEPOSUPTO:        case OP_TYPEPOSUPTO:
1708        if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;        if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
1709        break;        break;
1710    
1711          case OP_MARK:
1712          case OP_PRUNE_ARG:
1713          case OP_SKIP_ARG:
1714          case OP_THEN_ARG:
1715          code += code[1];
1716          break;
1717        }        }
1718    
1719      /* Add in the fixed length from the table */      /* Add in the fixed length from the table */
# Line 1705  for (;;) Line 1785  for (;;)
1785    
1786    /* Otherwise, we can get the item's length from the table, except that for    /* Otherwise, we can get the item's length from the table, except that for
1787    repeated character types, we have to test for \p and \P, which have an extra    repeated character types, we have to test for \p and \P, which have an extra
1788    two bytes of parameters. */    two bytes of parameters, and for MARK/PRUNE/SKIP/THEN with an argument, we
1789      must add in its length. */
1790    
1791    else    else
1792      {      {
# Line 1729  for (;;) Line 1810  for (;;)
1810        case OP_TYPEEXACT:        case OP_TYPEEXACT:
1811        if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;        if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
1812        break;        break;
1813    
1814          case OP_MARK:
1815          case OP_PRUNE_ARG:
1816          case OP_SKIP_ARG:
1817          case OP_THEN_ARG:
1818          code += code[1];
1819          break;
1820        }        }
1821    
1822      /* Add in the fixed length from the table */      /* Add in the fixed length from the table */
# Line 1785  Arguments: Line 1873  Arguments:
1873    code        points to start of search    code        points to start of search
1874    endcode     points to where to stop    endcode     points to where to stop
1875    utf8        TRUE if in UTF8 mode    utf8        TRUE if in UTF8 mode
1876      cd          contains pointers to tables etc.
1877    
1878  Returns:      TRUE if what is matched could be empty  Returns:      TRUE if what is matched could be empty
1879  */  */
1880    
1881  static BOOL  static BOOL
1882  could_be_empty_branch(const uschar *code, const uschar *endcode, BOOL utf8)  could_be_empty_branch(const uschar *code, const uschar *endcode, BOOL utf8,
1883      compile_data *cd)
1884  {  {
1885  register int c;  register int c;
1886  for (code = first_significant_code(code + _pcre_OP_lengths[*code], NULL, 0, TRUE);  for (code = first_significant_code(code + _pcre_OP_lengths[*code], NULL, 0, TRUE);
# Line 1821  for (code = first_significant_code(code Line 1911  for (code = first_significant_code(code
1911      continue;      continue;
1912      }      }
1913    
1914      /* For a recursion/subroutine call, if its end has been reached, which
1915      implies a subroutine call, we can scan it. */
1916    
1917      if (c == OP_RECURSE)
1918        {
1919        BOOL empty_branch = FALSE;
1920        const uschar *scode = cd->start_code + GET(code, 1);
1921        if (GET(scode, 1) == 0) return TRUE;    /* Unclosed */
1922        do
1923          {
1924          if (could_be_empty_branch(scode, endcode, utf8, cd))
1925            {
1926            empty_branch = TRUE;
1927            break;
1928            }
1929          scode += GET(scode, 1);
1930          }
1931        while (*scode == OP_ALT);
1932        if (!empty_branch) return FALSE;  /* All branches are non-empty */
1933        continue;
1934        }
1935    
1936    /* For other groups, scan the branches. */    /* For other groups, scan the branches. */
1937    
1938    if (c == OP_BRA || c == OP_CBRA || c == OP_ONCE || c == OP_COND)    if (c == OP_BRA || c == OP_CBRA || c == OP_ONCE || c == OP_COND)
# Line 1839  for (code = first_significant_code(code Line 1951  for (code = first_significant_code(code
1951        empty_branch = FALSE;        empty_branch = FALSE;
1952        do        do
1953          {          {
1954          if (!empty_branch && could_be_empty_branch(code, endcode, utf8))          if (!empty_branch && could_be_empty_branch(code, endcode, utf8, cd))
1955            empty_branch = TRUE;            empty_branch = TRUE;
1956          code += GET(code, 1);          code += GET(code, 1);
1957          }          }
# Line 1973  for (code = first_significant_code(code Line 2085  for (code = first_significant_code(code
2085      if (utf8 && code[3] >= 0xc0) code += _pcre_utf8_table4[code[3] & 0x3f];      if (utf8 && code[3] >= 0xc0) code += _pcre_utf8_table4[code[3] & 0x3f];
2086      break;      break;
2087  #endif  #endif
2088    
2089        /* MARK, and PRUNE/SKIP/THEN with an argument must skip over the argument
2090        string. */
2091    
2092        case OP_MARK:
2093        case OP_PRUNE_ARG:
2094        case OP_SKIP_ARG:
2095        case OP_THEN_ARG:
2096        code += code[1];
2097        break;
2098    
2099        /* None of the remaining opcodes are required to match a character. */
2100    
2101        default:
2102        break;
2103      }      }
2104    }    }
2105    
# Line 1995  Arguments: Line 2122  Arguments:
2122    endcode     points to where to stop (current RECURSE item)    endcode     points to where to stop (current RECURSE item)
2123    bcptr       points to the chain of current (unclosed) branch starts    bcptr       points to the chain of current (unclosed) branch starts
2124    utf8        TRUE if in UTF-8 mode    utf8        TRUE if in UTF-8 mode
2125      cd          pointers to tables etc
2126    
2127  Returns:      TRUE if what is matched could be empty  Returns:      TRUE if what is matched could be empty
2128  */  */
2129    
2130  static BOOL  static BOOL
2131  could_be_empty(const uschar *code, const uschar *endcode, branch_chain *bcptr,  could_be_empty(const uschar *code, const uschar *endcode, branch_chain *bcptr,
2132    BOOL utf8)    BOOL utf8, compile_data *cd)
2133  {  {
2134  while (bcptr != NULL && bcptr->current_branch >= code)  while (bcptr != NULL && bcptr->current_branch >= code)
2135    {    {
2136    if (!could_be_empty_branch(bcptr->current_branch, endcode, utf8))    if (!could_be_empty_branch(bcptr->current_branch, endcode, utf8, cd))
2137      return FALSE;      return FALSE;
2138    bcptr = bcptr->outer;    bcptr = bcptr->outer;
2139    }    }
# Line 2652  BOOL inescq = FALSE; Line 2780  BOOL inescq = FALSE;
2780  BOOL groupsetfirstbyte = FALSE;  BOOL groupsetfirstbyte = FALSE;
2781  const uschar *ptr = *ptrptr;  const uschar *ptr = *ptrptr;
2782  const uschar *tempptr;  const uschar *tempptr;
2783    const uschar *nestptr = NULL;
2784  uschar *previous = NULL;  uschar *previous = NULL;
2785  uschar *previous_callout = NULL;  uschar *previous_callout = NULL;
2786  uschar *save_hwm = NULL;  uschar *save_hwm = NULL;
# Line 2722  for (;; ptr++) Line 2851  for (;; ptr++)
2851    
2852    c = *ptr;    c = *ptr;
2853    
2854      /* If we are at the end of a nested substitution, revert to the outer level
2855      string. Nesting only happens one level deep. */
2856    
2857      if (c == 0 && nestptr != NULL)
2858        {
2859        ptr = nestptr;
2860        nestptr = NULL;
2861        c = *ptr;
2862        }
2863    
2864    /* If we are in the pre-compile phase, accumulate the length used for the    /* If we are in the pre-compile phase, accumulate the length used for the
2865    previous cycle of this loop. */    previous cycle of this loop. */
2866    
# Line 2730  for (;; ptr++) Line 2869  for (;; ptr++)
2869  #ifdef PCRE_DEBUG  #ifdef PCRE_DEBUG
2870      if (code > cd->hwm) cd->hwm = code;                 /* High water info */      if (code > cd->hwm) cd->hwm = code;                 /* High water info */
2871  #endif  #endif
2872      if (code > cd->start_workspace + COMPILE_WORK_SIZE) /* Check for overrun */      if (code > cd->start_workspace + WORK_SIZE_CHECK)   /* Check for overrun */
2873        {        {
2874        *errorcodeptr = ERR52;        *errorcodeptr = ERR52;
2875        goto FAILED;        goto FAILED;
# Line 2779  for (;; ptr++) Line 2918  for (;; ptr++)
2918    /* In the real compile phase, just check the workspace used by the forward    /* In the real compile phase, just check the workspace used by the forward
2919    reference list. */    reference list. */
2920    
2921    else if (cd->hwm > cd->start_workspace + COMPILE_WORK_SIZE)    else if (cd->hwm > cd->start_workspace + WORK_SIZE_CHECK)
2922      {      {
2923      *errorcodeptr = ERR52;      *errorcodeptr = ERR52;
2924      goto FAILED;      goto FAILED;
# Line 3019  for (;; ptr++) Line 3158  for (;; ptr++)
3158          {                           /* Braces are required because the */          {                           /* Braces are required because the */
3159          GETCHARLEN(c, ptr, ptr);    /* macro generates multiple statements */          GETCHARLEN(c, ptr, ptr);    /* macro generates multiple statements */
3160          }          }
3161    
3162        /* In the pre-compile phase, accumulate the length of any UTF-8 extra        /* In the pre-compile phase, accumulate the length of any UTF-8 extra
3163        data and reset the pointer. This is so that very large classes that        data and reset the pointer. This is so that very large classes that
3164        contain a zillion UTF-8 characters no longer overwrite the work space        contain a zillion UTF-8 characters no longer overwrite the work space
# Line 3088  for (;; ptr++) Line 3227  for (;; ptr++)
3227    
3228          if ((options & PCRE_CASELESS) != 0 && posix_class <= 2)          if ((options & PCRE_CASELESS) != 0 && posix_class <= 2)
3229            posix_class = 0;            posix_class = 0;
3230    
3231          /* We build the bit map for the POSIX class in a chunk of local store          /* When PCRE_UCP is set, some of the POSIX classes are converted to
3232          because we may be adding and subtracting from it, and we don't want to          different escape sequences that use Unicode properties. */
3233          subtract bits that may be in the main map already. At the end we or the  
3234          result into the bit map that is being built. */  #ifdef SUPPORT_UCP
3235            if ((options & PCRE_UCP) != 0)
3236              {
3237              int pc = posix_class + ((local_negate)? POSIX_SUBSIZE/2 : 0);
3238              if (posix_substitutes[pc] != NULL)
3239                {
3240                nestptr = tempptr + 1;
3241                ptr = posix_substitutes[pc] - 1;
3242                continue;
3243                }
3244              }
3245    #endif
3246            /* In the non-UCP case, we build the bit map for the POSIX class in a
3247            chunk of local store because we may be adding and subtracting from it,
3248            and we don't want to subtract bits that may be in the main map already.
3249            At the end we or the result into the bit map that is being built. */
3250    
3251          posix_class *= 3;          posix_class *= 3;
3252    
# Line 3136  for (;; ptr++) Line 3290  for (;; ptr++)
3290    
3291        /* Backslash may introduce a single character, or it may introduce one        /* Backslash may introduce a single character, or it may introduce one
3292        of the specials, which just set a flag. The sequence \b is a special        of the specials, which just set a flag. The sequence \b is a special
3293        case. Inside a class (and only there) it is treated as backspace.        case. Inside a class (and only there) it is treated as backspace. We
3294        Elsewhere it marks a word boundary. Other escapes have preset maps ready        assume that other escapes have more than one character in them, so set
3295        to 'or' into the one we are building. We assume they have more than one        class_charcount bigger than one. Unrecognized escapes fall through and
3296        character in them, so set class_charcount bigger than one. */        are either treated as literal characters (by default), or are faulted if
3297          PCRE_EXTRA is set. */
3298    
3299        if (c == CHAR_BACKSLASH)        if (c == CHAR_BACKSLASH)
3300          {          {
3301          c = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE);          c = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE);
3302          if (*errorcodeptr != 0) goto FAILED;          if (*errorcodeptr != 0) goto FAILED;
3303    
3304          if (-c == ESC_b) c = CHAR_BS;       /* \b is backspace in a class */          if (-c == ESC_b) c = CHAR_BS;    /* \b is backspace in a class */
         else if (-c == ESC_X) c = CHAR_X;   /* \X is literal X in a class */  
         else if (-c == ESC_R) c = CHAR_R;   /* \R is literal R in a class */  
3305          else if (-c == ESC_Q)            /* Handle start of quoted string */          else if (-c == ESC_Q)            /* Handle start of quoted string */
3306            {            {
3307            if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)            if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
# Line 3165  for (;; ptr++) Line 3318  for (;; ptr++)
3318            register const uschar *cbits = cd->cbits;            register const uschar *cbits = cd->cbits;
3319            class_charcount += 2;     /* Greater than 1 is what matters */            class_charcount += 2;     /* Greater than 1 is what matters */
3320    
3321            /* Save time by not doing this in the pre-compile phase. */            switch (-c)
   
           if (lengthptr == NULL) switch (-c)  
3322              {              {
3323    #ifdef SUPPORT_UCP
3324                case ESC_du:     /* These are the values given for \d etc */
3325                case ESC_DU:     /* when PCRE_UCP is set. We replace the */
3326                case ESC_wu:     /* escape sequence with an appropriate \p */
3327                case ESC_WU:     /* or \P to test Unicode properties instead */
3328                case ESC_su:     /* of the default ASCII testing. */
3329                case ESC_SU:
3330                nestptr = ptr;
3331                ptr = substitutes[-c - ESC_DU] - 1;  /* Just before substitute */
3332                class_charcount -= 2;                /* Undo! */
3333                continue;
3334    #endif
3335              case ESC_d:              case ESC_d:
3336              for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_digit];              for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_digit];
3337              continue;              continue;
# Line 3198  for (;; ptr++) Line 3361  for (;; ptr++)
3361              classbits[1] |= 0x08;    /* Perl 5.004 onwards omits VT from \s */              classbits[1] |= 0x08;    /* Perl 5.004 onwards omits VT from \s */
3362              continue;              continue;
3363    
3364              default:    /* Not recognized; fall through */              case ESC_h:
             break;      /* Need "default" setting to stop compiler warning. */  
             }  
   
           /* In the pre-compile phase, just do the recognition. */  
   
           else if (c == -ESC_d || c == -ESC_D || c == -ESC_w ||  
                    c == -ESC_W || c == -ESC_s || c == -ESC_S) continue;  
   
           /* We need to deal with \H, \h, \V, and \v in both phases because  
           they use extra memory. */  
   
           if (-c == ESC_h)  
             {  
3365              SETBIT(classbits, 0x09); /* VT */              SETBIT(classbits, 0x09); /* VT */
3366              SETBIT(classbits, 0x20); /* SPACE */              SETBIT(classbits, 0x20); /* SPACE */
3367              SETBIT(classbits, 0xa0); /* NSBP */              SETBIT(classbits, 0xa0); /* NSBP */
# Line 3235  for (;; ptr++) Line 3385  for (;; ptr++)
3385                }                }
3386  #endif  #endif
3387              continue;              continue;
             }  
3388    
3389            if (-c == ESC_H)              case ESC_H:
             {  
3390              for (c = 0; c < 32; c++)              for (c = 0; c < 32; c++)
3391                {                {
3392                int x = 0xff;                int x = 0xff;
# Line 3280  for (;; ptr++) Line 3428  for (;; ptr++)
3428                }                }
3429  #endif  #endif
3430              continue;              continue;
             }  
3431    
3432            if (-c == ESC_v)              case ESC_v:
             {  
3433              SETBIT(classbits, 0x0a); /* LF */              SETBIT(classbits, 0x0a); /* LF */
3434              SETBIT(classbits, 0x0b); /* VT */              SETBIT(classbits, 0x0b); /* VT */
3435              SETBIT(classbits, 0x0c); /* FF */              SETBIT(classbits, 0x0c); /* FF */
# Line 3299  for (;; ptr++) Line 3445  for (;; ptr++)
3445                }                }
3446  #endif  #endif
3447              continue;              continue;
             }  
3448    
3449            if (-c == ESC_V)              case ESC_V:
             {  
3450              for (c = 0; c < 32; c++)              for (c = 0; c < 32; c++)
3451                {                {
3452                int x = 0xff;                int x = 0xff;
# Line 3332  for (;; ptr++) Line 3476  for (;; ptr++)
3476                }                }
3477  #endif  #endif
3478              continue;              continue;
             }  
   
           /* We need to deal with \P and \p in both phases. */  
3479    
3480  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
3481            if (-c == ESC_p || -c == ESC_P)              case ESC_p:
3482              {              case ESC_P:
3483              BOOL negated;                {
3484              int pdata;                BOOL negated;
3485              int ptype = get_ucp(&ptr, &negated, &pdata, errorcodeptr);                int pdata;
3486              if (ptype < 0) goto FAILED;                int ptype = get_ucp(&ptr, &negated, &pdata, errorcodeptr);
3487              class_utf8 = TRUE;                if (ptype < 0) goto FAILED;
3488              *class_utf8data++ = ((-c == ESC_p) != negated)?                class_utf8 = TRUE;
3489                XCL_PROP : XCL_NOTPROP;                *class_utf8data++ = ((-c == ESC_p) != negated)?
3490              *class_utf8data++ = ptype;                  XCL_PROP : XCL_NOTPROP;
3491              *class_utf8data++ = pdata;                *class_utf8data++ = ptype;
3492              class_charcount -= 2;   /* Not a < 256 character */                *class_utf8data++ = pdata;
3493              continue;                class_charcount -= 2;   /* Not a < 256 character */
3494              }                continue;
3495                  }
3496  #endif  #endif
3497            /* Unrecognized escapes are faulted if PCRE is running in its              /* Unrecognized escapes are faulted if PCRE is running in its
3498            strict mode. By default, for compatibility with Perl, they are              strict mode. By default, for compatibility with Perl, they are
3499            treated as literals. */              treated as literals. */
3500    
3501            if ((options & PCRE_EXTRA) != 0)              default:
3502              {              if ((options & PCRE_EXTRA) != 0)
3503              *errorcodeptr = ERR7;                {
3504              goto FAILED;                *errorcodeptr = ERR7;
3505                  goto FAILED;
3506                  }
3507                class_charcount -= 2;  /* Undo the default count from above */
3508                c = *ptr;              /* Get the final character and fall through */
3509                break;
3510              }              }
   
           class_charcount -= 2;  /* Undo the default count from above */  
           c = *ptr;              /* Get the final character and fall through */  
3511            }            }
3512    
3513          /* Fall through if we have a single character (c >= 0). This may be          /* Fall through if we have a single character (c >= 0). This may be
# Line 3433  for (;; ptr++) Line 3577  for (;; ptr++)
3577            d = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE);            d = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE);
3578            if (*errorcodeptr != 0) goto FAILED;            if (*errorcodeptr != 0) goto FAILED;
3579    
3580            /* \b is backspace; \X is literal X; \R is literal R; any other            /* \b is backspace; any other special means the '-' was literal */
           special means the '-' was literal */  
3581    
3582            if (d < 0)            if (d < 0)
3583              {              {
3584              if (d == -ESC_b) d = CHAR_BS;              if (d == -ESC_b) d = CHAR_BS; else
             else if (d == -ESC_X) d = CHAR_X;  
             else if (d == -ESC_R) d = CHAR_R; else  
3585                {                {
3586                ptr = oldptr;                ptr = oldptr;
3587                goto LONE_SINGLE_CHARACTER;  /* A few lines below */                goto LONE_SINGLE_CHARACTER;  /* A few lines below */
# Line 3606  for (;; ptr++) Line 3747  for (;; ptr++)
3747          }          }
3748        }        }
3749    
3750      /* Loop until ']' reached. This "while" is the end of the "do" above. */      /* Loop until ']' reached. This "while" is the end of the "do" far above.
3751        If we are at the end of an internal nested string, revert to the outer
3752        string. */
3753    
3754        while (((c = *(++ptr)) != 0 ||
3755               (nestptr != NULL &&
3756                 (ptr = nestptr, nestptr = NULL, c = *(++ptr)) != 0)) &&
3757               (c != CHAR_RIGHT_SQUARE_BRACKET || inescq));
3758    
3759      while ((c = *(++ptr)) != 0 && (c != CHAR_RIGHT_SQUARE_BRACKET || inescq));      /* Check for missing terminating ']' */
3760    
3761      if (c == 0)                          /* Missing terminating ']' */      if (c == 0)
3762        {        {
3763        *errorcodeptr = ERR6;        *errorcodeptr = ERR6;
3764        goto FAILED;        goto FAILED;
3765        }        }
3766    
   
 /* This code has been disabled because it would mean that \s counts as  
 an explicit \r or \n reference, and that's not really what is wanted. Now  
 we set the flag only if there is a literal "\r" or "\n" in the class. */  
   
 #if 0  
     /* Remember whether \r or \n are in this class */  
   
     if (negate_class)  
       {  
       if ((classbits[1] & 0x24) != 0x24) cd->external_flags |= PCRE_HASCRORLF;  
       }  
     else  
       {  
       if ((classbits[1] & 0x24) != 0) cd->external_flags |= PCRE_HASCRORLF;  
       }  
 #endif  
   
   
3767      /* If class_charcount is 1, we saw precisely one character whose value is      /* If class_charcount is 1, we saw precisely one character whose value is
3768      less than 256. As long as there were no characters >= 128 and there was no      less than 256. As long as there were no characters >= 128 and there was no
3769      use of \p or \P, in other words, no use of any XCLASS features, we can      use of \p or \P, in other words, no use of any XCLASS features, we can
# Line 3651  we set the flag only if there is a liter Line 3780  we set the flag only if there is a liter
3780      can cause firstbyte to be set. Otherwise, there can be no first char if      can cause firstbyte to be set. Otherwise, there can be no first char if
3781      this item is first, whatever repeat count may follow. In the case of      this item is first, whatever repeat count may follow. In the case of
3782      reqbyte, save the previous value for reinstating. */      reqbyte, save the previous value for reinstating. */
3783    
3784  #ifdef SUPPORT_UTF8  #ifdef SUPPORT_UTF8
3785      if (class_charcount == 1 && !class_utf8 &&      if (class_charcount == 1 && !class_utf8 &&
3786        (!utf8 || !negate_class || class_lastchar < 128))        (!utf8 || !negate_class || class_lastchar < 128))
# Line 3698  we set the flag only if there is a liter Line 3827  we set the flag only if there is a liter
3827    
3828      /* If there are characters with values > 255, we have to compile an      /* If there are characters with values > 255, we have to compile an
3829      extended class, with its own opcode, unless there was a negated special      extended class, with its own opcode, unless there was a negated special
3830      such as \S in the class, because in that case all characters > 255 are in      such as \S in the class, and PCRE_UCP is not set, because in that case all
3831      the class, so any that were explicitly given as well can be ignored. If      characters > 255 are in the class, so any that were explicitly given as
3832      (when there are explicit characters > 255 that must be listed) there are no      well can be ignored. If (when there are explicit characters > 255 that must
3833      characters < 256, we can omit the bitmap in the actual compiled code. */      be listed) there are no characters < 256, we can omit the bitmap in the
3834        actual compiled code. */
3835    
3836  #ifdef SUPPORT_UTF8  #ifdef SUPPORT_UTF8
3837      if (class_utf8 && !should_flip_negation)      if (class_utf8 && (!should_flip_negation || (options & PCRE_UCP) != 0))
3838        {        {
3839        *class_utf8data++ = XCL_END;    /* Marks the end of extra data */        *class_utf8data++ = XCL_END;    /* Marks the end of extra data */
3840        *code++ = OP_XCLASS;        *code++ = OP_XCLASS;
# Line 3730  we set the flag only if there is a liter Line 3860  we set the flag only if there is a liter
3860        }        }
3861  #endif  #endif
3862    
3863      /* If there are no characters > 255, set the opcode to OP_CLASS or      /* If there are no characters > 255, or they are all to be included or
3864      OP_NCLASS, depending on whether the whole class was negated and whether      excluded, set the opcode to OP_CLASS or OP_NCLASS, depending on whether the
3865      there were negative specials such as \S in the class. Then copy the 32-byte      whole class was negated and whether there were negative specials such as \S
3866      map into the code vector, negating it if necessary. */      (non-UCP) in the class. Then copy the 32-byte map into the code vector,
3867        negating it if necessary. */
3868    
3869      *code++ = (negate_class == should_flip_negation) ? OP_CLASS : OP_NCLASS;      *code++ = (negate_class == should_flip_negation) ? OP_CLASS : OP_NCLASS;
3870      if (negate_class)      if (negate_class)
# Line 4363  we set the flag only if there is a liter Line 4494  we set the flag only if there is a liter
4494            uschar *scode = bracode;            uschar *scode = bracode;
4495            do            do
4496              {              {
4497              if (could_be_empty_branch(scode, ketcode, utf8))              if (could_be_empty_branch(scode, ketcode, utf8, cd))
4498                {                {
4499                *bracode += OP_SBRA - OP_BRA;                *bracode += OP_SBRA - OP_BRA;
4500                break;                break;
# Line 4440  we set the flag only if there is a liter Line 4571  we set the flag only if there is a liter
4571    
4572          /* Because we are moving code along, we must ensure that any          /* Because we are moving code along, we must ensure that any
4573          pending recursive references are updated. */          pending recursive references are updated. */
4574    
4575          default:          default:
4576          *code = OP_END;          *code = OP_END;
4577          adjust_recurse(tempcode, 1 + LINK_SIZE, utf8, cd, save_hwm);          adjust_recurse(tempcode, 1 + LINK_SIZE, utf8, cd, save_hwm);
# Line 4479  we set the flag only if there is a liter Line 4610  we set the flag only if there is a liter
4610    
4611      /* First deal with various "verbs" that can be introduced by '*'. */      /* First deal with various "verbs" that can be introduced by '*'. */
4612    
4613      if (*(++ptr) == CHAR_ASTERISK && (cd->ctypes[ptr[1]] & ctype_letter) != 0)      if (*(++ptr) == CHAR_ASTERISK &&
4614             ((cd->ctypes[ptr[1]] & ctype_letter) != 0 || ptr[1] == ':'))
4615        {        {
4616        int i, namelen;        int i, namelen;
4617          int arglen = 0;
4618        const char *vn = verbnames;        const char *vn = verbnames;
4619        const uschar *name = ++ptr;        const uschar *name = ptr + 1;
4620          const uschar *arg = NULL;
4621        previous = NULL;        previous = NULL;
4622        while ((cd->ctypes[*++ptr] & ctype_letter) != 0) {};        while ((cd->ctypes[*++ptr] & ctype_letter) != 0) {};
4623          namelen = ptr - name;
4624    
4625        if (*ptr == CHAR_COLON)        if (*ptr == CHAR_COLON)
4626          {          {
4627          *errorcodeptr = ERR59;   /* Not supported */          arg = ++ptr;
4628          goto FAILED;          while ((cd->ctypes[*ptr] & (ctype_letter|ctype_digit)) != 0
4629              || *ptr == '_') ptr++;
4630            arglen = ptr - arg;
4631          }          }
4632    
4633        if (*ptr != CHAR_RIGHT_PARENTHESIS)        if (*ptr != CHAR_RIGHT_PARENTHESIS)
4634          {          {
4635          *errorcodeptr = ERR60;          *errorcodeptr = ERR60;
4636          goto FAILED;          goto FAILED;
4637          }          }
4638        namelen = ptr - name;  
4639          /* Scan the table of verb names */
4640    
4641        for (i = 0; i < verbcount; i++)        for (i = 0; i < verbcount; i++)
4642          {          {
4643          if (namelen == verbs[i].len &&          if (namelen == verbs[i].len &&
# Line 4514  we set the flag only if there is a liter Line 4655  we set the flag only if there is a liter
4655                PUT2INC(code, 0, oc->number);                PUT2INC(code, 0, oc->number);
4656                }                }
4657              }              }
4658            *code++ = verbs[i].op;  
4659            break;            /* Handle the cases with/without an argument */
4660    
4661              if (arglen == 0)
4662                {
4663                if (verbs[i].op < 0)   /* Argument is mandatory */
4664                  {
4665                  *errorcodeptr = ERR66;
4666                  goto FAILED;
4667                  }
4668                *code++ = verbs[i].op;
4669                }
4670    
4671              else
4672                {
4673                if (verbs[i].op_arg < 0)   /* Argument is forbidden */
4674                  {
4675                  *errorcodeptr = ERR59;
4676                  goto FAILED;
4677                  }
4678                *code++ = verbs[i].op_arg;
4679                *code++ = arglen;
4680                memcpy(code, arg, arglen);
4681                code += arglen;
4682                *code++ = 0;
4683                }
4684    
4685              break;  /* Found verb, exit loop */
4686            }            }
4687    
4688          vn += verbs[i].len + 1;          vn += verbs[i].len + 1;
4689          }          }
4690        if (i < verbcount) continue;  
4691        *errorcodeptr = ERR60;        if (i < verbcount) continue;    /* Successfully handled a verb */
4692          *errorcodeptr = ERR60;          /* Verb not recognized */
4693        goto FAILED;        goto FAILED;
4694        }        }
4695    
# Line 5162  we set the flag only if there is a liter Line 5331  we set the flag only if there is a liter
5331                  *errorcodeptr = ERR15;                  *errorcodeptr = ERR15;
5332                  goto FAILED;                  goto FAILED;
5333                  }                  }
5334    
5335                /* Fudge the value of "called" so that when it is inserted as an                /* Fudge the value of "called" so that when it is inserted as an
5336                offset below, what it actually inserted is the reference number                offset below, what it actually inserted is the reference number
5337                of the group. */                of the group. */
5338    
5339                called = cd->start_code + recno;                called = cd->start_code + recno;
5340                PUTINC(cd->hwm, 0, code + 2 + LINK_SIZE - cd->start_code);                PUTINC(cd->hwm, 0, code + 2 + LINK_SIZE - cd->start_code);
5341                }                }
# Line 5176  we set the flag only if there is a liter Line 5345  we set the flag only if there is a liter
5345              recursion that could loop for ever, and diagnose that case. */              recursion that could loop for ever, and diagnose that case. */
5346    
5347              else if (GET(called, 1) == 0 &&              else if (GET(called, 1) == 0 &&
5348                       could_be_empty(called, code, bcptr, utf8))                       could_be_empty(called, code, bcptr, utf8, cd))
5349                {                {
5350                *errorcodeptr = ERR40;                *errorcodeptr = ERR40;
5351                goto FAILED;                goto FAILED;
# Line 5303  we set the flag only if there is a liter Line 5472  we set the flag only if there is a liter
5472          }     /* End of switch for character following (? */          }     /* End of switch for character following (? */
5473        }       /* End of (? handling */        }       /* End of (? handling */
5474    
5475      /* Opening parenthesis not followed by '?'. If PCRE_NO_AUTO_CAPTURE is set,      /* Opening parenthesis not followed by '*' or '?'. If PCRE_NO_AUTO_CAPTURE
5476      all unadorned brackets become non-capturing and behave like (?:...)      is set, all unadorned brackets become non-capturing and behave like (?:...)
5477      brackets. */      brackets. */
5478    
5479      else if ((options & PCRE_NO_AUTO_CAPTURE) != 0)      else if ((options & PCRE_NO_AUTO_CAPTURE) != 0)
# Line 5496  we set the flag only if there is a liter Line 5665  we set the flag only if there is a liter
5665    
5666      /* ===================================================================*/      /* ===================================================================*/
5667      /* Handle metasequences introduced by \. For ones like \d, the ESC_ values      /* Handle metasequences introduced by \. For ones like \d, the ESC_ values
5668      are arranged to be the negation of the corresponding OP_values. For the      are arranged to be the negation of the corresponding OP_values in the
5669      back references, the values are ESC_REF plus the reference number. Only      default case when PCRE_UCP is not set. For the back references, the values
5670      back references and those types that consume a character may be repeated.      are ESC_REF plus the reference number. Only back references and those types
5671      We can test for values between ESC_b and ESC_Z for the latter; this may      that consume a character may be repeated. We can test for values between
5672      have to change if any new ones are ever created. */      ESC_b and ESC_Z for the latter; this may have to change if any new ones are
5673        ever created. */
5674    
5675      case CHAR_BACKSLASH:      case CHAR_BACKSLASH:
5676      tempptr = ptr;      tempptr = ptr;
# Line 5660  we set the flag only if there is a liter Line 5830  we set the flag only if there is a liter
5830  #endif  #endif
5831    
5832        /* For the rest (including \X when Unicode properties are supported), we        /* For the rest (including \X when Unicode properties are supported), we
5833        can obtain the OP value by negating the escape value. */        can obtain the OP value by negating the escape value in the default
5834          situation when PCRE_UCP is not set. When it *is* set, we substitute
5835          Unicode property tests. */
5836    
5837        else        else
5838          {          {
5839          previous = (-c > ESC_b && -c < ESC_Z)? code : NULL;  #ifdef SUPPORT_UCP
5840          *code++ = -c;          if (-c >= ESC_DU && -c <= ESC_wu)
5841              {
5842              nestptr = ptr + 1;                   /* Where to resume */
5843              ptr = substitutes[-c - ESC_DU] - 1;  /* Just before substitute */
5844              }
5845            else
5846    #endif
5847              {
5848              previous = (-c > ESC_b && -c < ESC_Z)? code : NULL;
5849              *code++ = -c;
5850              }
5851          }          }
5852        continue;        continue;
5853        }        }
# Line 6402  int length = 1;  /* For final END opcode Line 6584  int length = 1;  /* For final END opcode
6584  int firstbyte, reqbyte, newline;  int firstbyte, reqbyte, newline;
6585  int errorcode = 0;  int errorcode = 0;
6586  int skipatstart = 0;  int skipatstart = 0;
6587  BOOL utf8 = (options & PCRE_UTF8) != 0;  BOOL utf8;
6588  size_t size;  size_t size;
6589  uschar *code;  uschar *code;
6590  const uschar *codestart;  const uschar *codestart;
# Line 6472  while (ptr[skipatstart] == CHAR_LEFT_PAR Line 6654  while (ptr[skipatstart] == CHAR_LEFT_PAR
6654    
6655    if (strncmp((char *)(ptr+skipatstart+2), STRING_UTF8_RIGHTPAR, 5) == 0)    if (strncmp((char *)(ptr+skipatstart+2), STRING_UTF8_RIGHTPAR, 5) == 0)
6656      { skipatstart += 7; options |= PCRE_UTF8; continue; }      { skipatstart += 7; options |= PCRE_UTF8; continue; }
6657      else if (strncmp((char *)(ptr+skipatstart+2), STRING_UCP_RIGHTPAR, 4) == 0)
6658        { skipatstart += 6; options |= PCRE_UCP; continue; }
6659    
6660    if (strncmp((char *)(ptr+skipatstart+2), STRING_CR_RIGHTPAR, 3) == 0)    if (strncmp((char *)(ptr+skipatstart+2), STRING_CR_RIGHTPAR, 3) == 0)
6661      { skipatstart += 5; newnl = PCRE_NEWLINE_CR; }      { skipatstart += 5; newnl = PCRE_NEWLINE_CR; }
# Line 6495  while (ptr[skipatstart] == CHAR_LEFT_PAR Line 6679  while (ptr[skipatstart] == CHAR_LEFT_PAR
6679      options = (options & ~(PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) | newbsr;      options = (options & ~(PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) | newbsr;
6680    else break;    else break;
6681    }    }
6682    
6683    utf8 = (options & PCRE_UTF8) != 0;
6684    
6685  /* Can't support UTF8 unless PCRE has been compiled to include the code. */  /* Can't support UTF8 unless PCRE has been compiled to include the code. */
6686    
# Line 6513  if (utf8) Line 6699  if (utf8)
6699    }    }
6700  #endif  #endif
6701    
6702    /* Can't support UCP unless PCRE has been compiled to include the code. */
6703    
6704    #ifndef SUPPORT_UCP
6705    if ((options & PCRE_UCP) != 0)
6706      {
6707      errorcode = ERR67;
6708      goto PCRE_EARLY_ERROR_RETURN;
6709      }
6710    #endif
6711    
6712  /* Check validity of \R options. */  /* Check validity of \R options. */
6713    
6714  switch (options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE))  switch (options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE))

Legend:
Removed from v.500  
changed lines
  Added in v.518

  ViewVC Help
Powered by ViewVC 1.1.5