/[pcre]/code/trunk/pcre_compile.c

Diff of /code/trunk/pcre_compile.c

Parent Directory | Revision Log | View Patch Patch

-revision 208 by ph10,
Mon Aug  6 15:23:29 2007 UTC
+revision 455 by ph10,
Sat Sep 26 19:12:32 2009 UTC
 Line 6
  and semantics are as close as possible to those of the Perl 5 language.
                         Written by Philip Hazel
-            Copyright (c) 1997-2007 University of Cambridge
+            Copyright (c) 1997-2009 University of Cambridge
  -----------------------------------------------------------------------------
  Redistribution and use in source and binary forms, with or without
 Line 43 
 supporting internal functions that are n
  #ifdef HAVE_CONFIG_H
- #include <config.h>
+ #include "config.h"
  #endif
  #define NLBLOCK cd             /* Block containing newline information */
 Line 97 
 are simple data values; negative values
  on. Zero means further processing is needed (for things like \x), or the escape
  is invalid. */
- #ifndef EBCDIC  /* This is the "normal" table for ASCII systems */
+ #ifndef EBCDIC
+ /* This is the "normal" table for ASCII systems or for EBCDIC systems running
+ in UTF-8 mode. */
  static const short int escapes[] = {
-,      0,      0,      0,      0,      0,      0,      0,   /* 0 - 7 */
+,                       0,
-,      0,    ':',    ';',    '<',    '=',    '>',    '?',   /* 8 - ? */
+,                       0,
-    '@', -ESC_A, -ESC_B, -ESC_C, -ESC_D, -ESC_E,      0, -ESC_G,   /* @ - G */
+,                       0,
- -ESC_H,      0,      0, -ESC_K,      0,      0,      0,      0,   /* H - O */
+,                       0,
- -ESC_P, -ESC_Q, -ESC_R, -ESC_S,      0,      0, -ESC_V, -ESC_W,   /* P - W */
+,                       0,
- -ESC_X,      0, -ESC_Z,    '[',   '\\',    ']',    '^',    '_',   /* X - _ */
+      CHAR_COLON,              CHAR_SEMICOLON,
-    '`',      7, -ESC_b,      0, -ESC_d,  ESC_e,  ESC_f,      0,   /* ` - g */
+      CHAR_LESS_THAN_SIGN,     CHAR_EQUALS_SIGN,
- -ESC_h,      0,      0, -ESC_k,      0,      0,  ESC_n,      0,   /* h - o */
+      CHAR_GREATER_THAN_SIGN,  CHAR_QUESTION_MARK,
- -ESC_p,      0,  ESC_r, -ESC_s,  ESC_tee,    0, -ESC_v, -ESC_w,   /* p - w */
+      CHAR_COMMERCIAL_AT,      -ESC_A,
-,      0, -ESC_z                                            /* x - z */
+      -ESC_B,                  -ESC_C,
+      -ESC_D,                  -ESC_E,
+,                       -ESC_G,
+      -ESC_H,                  0,
+,                       -ESC_K,
+,                       0,
+,                       0,
+      -ESC_P,                  -ESC_Q,
+      -ESC_R,                  -ESC_S,
+,                       0,
+      -ESC_V,                  -ESC_W,
+      -ESC_X,                  0,
+      -ESC_Z,                  CHAR_LEFT_SQUARE_BRACKET,
+      CHAR_BACKSLASH,          CHAR_RIGHT_SQUARE_BRACKET,
+      CHAR_CIRCUMFLEX_ACCENT,  CHAR_UNDERSCORE,
+      CHAR_GRAVE_ACCENT,       7,
+      -ESC_b,                  0,
+      -ESC_d,                  ESC_e,
+      ESC_f,                   0,
+      -ESC_h,                  0,
+,                       -ESC_k,
+,                       0,
+      ESC_n,                   0,
+      -ESC_p,                  0,
+      ESC_r,                   -ESC_s,
+      ESC_tee,                 0,
+      -ESC_v,                  -ESC_w,
+,                       0,
+      -ESC_z
  };
- #else           /* This is the "abnormal" table for EBCDIC systems */
+ #else
+ /* This is the "abnormal" table for EBCDIC systems without UTF-8 support. */
  static const short int escapes[] = {
  /*  48 */     0,     0,      0,     '.',    '<',   '(',    '+',    '|',
  /*  50 */   '&',     0,      0,       0,      0,     0,      0,      0,
-Line 140 
 static const short int escapes[] = {
+Line 175 
 static const short int escapes[] = {
  #endif
- /* Tables of names of POSIX character classes and their lengths. The list is
+ /* Table of special "verbs" like (*PRUNE). This is a short table, so it is
- terminated by a zero length entry. The first three must be alpha, lower, upper,
+ searched linearly. Put all the names into a single string, in order to reduce
- as this is assumed for handling case independence. */
+ the number of relocations when a shared library is dynamically linked. The
+ string is built from string macros so that it works in UTF-8 mode on EBCDIC
- static const char *const posix_names[] = {
+ platforms. */
-   "alpha", "lower", "upper",
-   "alnum", "ascii", "blank", "cntrl", "digit", "graph",
+ typedef struct verbitem {
-   "print", "punct", "space", "word",  "xdigit" };
+   int   len;
+   int   op;
+ } verbitem;
+ static const char verbnames[] =
+   STRING_ACCEPT0
+   STRING_COMMIT0
+   STRING_F0
+   STRING_FAIL0
+   STRING_PRUNE0
+   STRING_SKIP0
+   STRING_THEN;
+ static const verbitem verbs[] = {
+   { 6, OP_ACCEPT },
+   { 6, OP_COMMIT },
+   { 1, OP_FAIL },
+   { 4, OP_FAIL },
+   { 5, OP_PRUNE },
+   { 4, OP_SKIP  },
+   { 4, OP_THEN  }
+ };
+ static const int verbcount = sizeof(verbs)/sizeof(verbitem);
+ /* Tables of names of POSIX character classes and their lengths. The names are
+ now all in a single string, to reduce the number of relocations when a shared
+ library is dynamically loaded. The list of lengths is terminated by a zero
+ length entry. The first three must be alpha, lower, upper, as this is assumed
+ for handling case independence. */
+ static const char posix_names[] =
+   STRING_alpha0 STRING_lower0 STRING_upper0 STRING_alnum0
+   STRING_ascii0 STRING_blank0 STRING_cntrl0 STRING_digit0
+   STRING_graph0 STRING_print0 STRING_punct0 STRING_space0
+   STRING_word0  STRING_xdigit;
  static const uschar posix_name_lengths[] = {
 , 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 };
-Line 186 
 static const int posix_class_maps[] = {
+Line 257 
 static const int posix_class_maps[] = {
  /* The texts of compile-time error messages. These are "char *" because they
  are passed to the outside world. Do not ever re-use any error number, because
  they are documented. Always add a new error instead. Messages marked DEAD below
- are no longer used. */
+ are no longer used. This used to be a table of strings, but in order to reduce
+ the number of relocations needed when a shared library is loaded dynamically,
- static const char *error_texts[] = {
+ it is now one long string. We cannot use a table of offsets, because the
-   "no error",
+ lengths of inserts such as XSTRING(MAX_NAME_SIZE) are not known. Instead, we
-   "\\ at end of pattern",
+ simply count through to the one we want - this isn't a performance issue
-   "\\c at end of pattern",
+ because these strings are used only when there is a compilation error. */
-   "unrecognized character follows \\",
-   "numbers out of order in {} quantifier",
+ static const char error_texts[] =
+   "no error\0"
+   "\\ at end of pattern\0"
+   "\\c at end of pattern\0"
+   "unrecognized character follows \\\0"
+   "numbers out of order in {} quantifier\0"
    /* 5 */
-   "number too big in {} quantifier",
+   "number too big in {} quantifier\0"
-   "missing terminating ] for character class",
+   "missing terminating ] for character class\0"
-   "invalid escape sequence in character class",
+   "invalid escape sequence in character class\0"
-   "range out of order in character class",
+   "range out of order in character class\0"
-   "nothing to repeat",
+   "nothing to repeat\0"
    /* 10 */
-   "operand of unlimited repeat could match the empty string",  /** DEAD **/
+   "operand of unlimited repeat could match the empty string\0"  /** DEAD **/
-   "internal error: unexpected repeat",
+   "internal error: unexpected repeat\0"
-   "unrecognized character after (?",
+   "unrecognized character after (? or (?-\0"
-   "POSIX named classes are supported only within a class",
+   "POSIX named classes are supported only within a class\0"
-   "missing )",
+   "missing )\0"
    /* 15 */
-   "reference to non-existent subpattern",
+   "reference to non-existent subpattern\0"
-   "erroffset passed as NULL",
+   "erroffset passed as NULL\0"
-   "unknown option bit(s) set",
+   "unknown option bit(s) set\0"
-   "missing ) after comment",
+   "missing ) after comment\0"
-   "parentheses nested too deeply",  /** DEAD **/
+   "parentheses nested too deeply\0"  /** DEAD **/
    /* 20 */
-   "regular expression is too large",
+   "regular expression is too large\0"
-   "failed to get memory",
+   "failed to get memory\0"
-   "unmatched parentheses",
+   "unmatched parentheses\0"
-   "internal error: code overflow",
+   "internal error: code overflow\0"
-   "unrecognized character after (?<",
+   "unrecognized character after (?<\0"
    /* 25 */
-   "lookbehind assertion is not fixed length",
+   "lookbehind assertion is not fixed length\0"
-   "malformed number or name after (?(",
+   "malformed number or name after (?(\0"
-   "conditional group contains more than two branches",
+   "conditional group contains more than two branches\0"
-   "assertion expected after (?(",
+   "assertion expected after (?(\0"
-   "(?R or (?[+-]digits must be followed by )",
+   "(?R or (?[+-]digits must be followed by )\0"
    /* 30 */
-   "unknown POSIX class name",
+   "unknown POSIX class name\0"
-   "POSIX collating elements are not supported",
+   "POSIX collating elements are not supported\0"
-   "this version of PCRE is not compiled with PCRE_UTF8 support",
+   "this version of PCRE is not compiled with PCRE_UTF8 support\0"
-   "spare error",  /** DEAD **/
+   "spare error\0"  /** DEAD **/
-   "character value in \\x{...} sequence is too large",
+   "character value in \\x{...} sequence is too large\0"
    /* 35 */
-   "invalid condition (?(0)",
+   "invalid condition (?(0)\0"
-   "\\C not allowed in lookbehind assertion",
+   "\\C not allowed in lookbehind assertion\0"
-   "PCRE does not support \\L, \\l, \\N, \\U, or \\u",
+   "PCRE does not support \\L, \\l, \\N, \\U, or \\u\0"
-   "number after (?C is > 255",
+   "number after (?C is > 255\0"
-   "closing ) for (?C expected",
+   "closing ) for (?C expected\0"
    /* 40 */
-   "recursive call could loop indefinitely",
+   "recursive call could loop indefinitely\0"
-   "unrecognized character after (?P",
+   "unrecognized character after (?P\0"
-   "syntax error in subpattern name (missing terminator)",
+   "syntax error in subpattern name (missing terminator)\0"
-   "two named subpatterns have the same name",
+   "two named subpatterns have the same name\0"
-   "invalid UTF-8 string",
+   "invalid UTF-8 string\0"
    /* 45 */
-   "support for \\P, \\p, and \\X has not been compiled",
+   "support for \\P, \\p, and \\X has not been compiled\0"
-   "malformed \\P or \\p sequence",
+   "malformed \\P or \\p sequence\0"
-   "unknown property name after \\P or \\p",
+   "unknown property name after \\P or \\p\0"
-   "subpattern name is too long (maximum " XSTRING(MAX_NAME_SIZE) " characters)",
+   "subpattern name is too long (maximum " XSTRING(MAX_NAME_SIZE) " characters)\0"
-   "too many named subpatterns (maximum " XSTRING(MAX_NAME_COUNT) ")",
+   "too many named subpatterns (maximum " XSTRING(MAX_NAME_COUNT) ")\0"
    /* 50 */
-   "repeated subpattern is too long",    /** DEAD **/
+   "repeated subpattern is too long\0"    /** DEAD **/
-   "octal value is greater than \\377 (not in UTF-8 mode)",
+   "octal value is greater than \\377 (not in UTF-8 mode)\0"
-   "internal error: overran compiling workspace",
+   "internal error: overran compiling workspace\0"
-   "internal error: previously-checked referenced subpattern not found",
+   "internal error: previously-checked referenced subpattern not found\0"
-   "DEFINE group contains more than one branch",
+   "DEFINE group contains more than one branch\0"
    /* 55 */
-   "repeating a DEFINE group is not allowed",
+   "repeating a DEFINE group is not allowed\0"
-   "inconsistent NEWLINE options",
+   "inconsistent NEWLINE options\0"
-   "\\g is not followed by a braced name or an optionally braced non-zero number",
+   "\\g is not followed by a braced, angle-bracketed, or quoted name/number or by a plain number\0"
-   "(?+ or (?- or (?(+ or (?(- must be followed by a non-zero number"
+   "a numbered reference must not be zero\0"
- };
+   "(*VERB) with an argument is not supported\0"
+   /* 60 */
+   "(*VERB) not recognized\0"
+   "number is too big\0"
+   "subpattern name expected\0"
+   "digit expected after (?+\0"
+   "] is an invalid data character in JavaScript compatibility mode";
  /* Table to identify digits and hex digits. This is used when compiling
-Line 278 
 For convenience, we use the same bit def
+Line 360 
 For convenience, we use the same bit def
  Then we can use ctype_digit and ctype_xdigit in the code. */
- #ifndef EBCDIC  /* This is the "normal" case, for ASCII systems */
+ #ifndef EBCDIC
+ /* This is the "normal" case, for ASCII systems, and EBCDIC systems running in
+ UTF-8 mode. */
  static const unsigned char digitab[] =
    {
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7 */
-Line 314 
 static const unsigned char digitab[] =
+Line 400 
 static const unsigned char digitab[] =
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */
- #else           /* This is the "abnormal" case, for EBCDIC systems */
+ #else
+ /* This is the "abnormal" case, for EBCDIC systems not running in UTF-8 mode. */
  static const unsigned char digitab[] =
    {
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7  0 */
-Line 395 
 static BOOL
+Line 484 
 static BOOL
  /*************************************************
+ *            Find an error text                  *
+ *************************************************/
+ /* The error texts are now all in one long string, to save on relocations. As
+ some of the text is of unknown length, we can't use a table of offsets.
+ Instead, just count through the strings. This is not a performance issue
+ because it happens only when there has been a compilation error.
+ Argument:   the error number
+ Returns:    pointer to the error string
+ */
+ static const char *
+ find_error_text(int n)
+ {
+ const char *s = error_texts;
+ for (; n > 0; n--) while (*s++ != 0) {};
+ return s;
+ }
+ /*************************************************
  *            Handle escapes                      *
  *************************************************/
-Line 415 
 Arguments:
+Line 526 
 Arguments:
  Returns:         zero or positive => a data character
                   negative => a special escape sequence
-                  on error, errorptr is set
+                  on error, errorcodeptr is set
  */
  static int
-Line 433 
 ptr--;                            /* Set
+Line 544 
 ptr--;                            /* Set
  if (c == 0) *errorcodeptr = ERR1;
- /* Non-alphamerics are literals. For digits or letters, do an initial lookup in
+ /* Non-alphanumerics are literals. For digits or letters, do an initial lookup
- a table. A non-zero result is something that can be returned immediately.
+ in a table. A non-zero result is something that can be returned immediately.
  Otherwise further processing may be required. */
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
- else if (c < '0' || c > 'z') {}                           /* Not alphameric */
+ else if (c < CHAR_0 || c > CHAR_z) {}                     /* Not alphanumeric */
- else if ((i = escapes[c - '0']) != 0) c = i;
+ else if ((i = escapes[c - CHAR_0]) != 0) c = i;
  #else           /* EBCDIC coding */
- else if (c < 'a' || (ebcdic_chartab[c] & 0x0E) == 0) {}   /* Not alphameric */
+ else if (c < 'a' || (ebcdic_chartab[c] & 0x0E) == 0) {}   /* Not alphanumeric */
  else if ((i = escapes[c - 0x48]) != 0)  c = i;
  #endif
-Line 458 
 else
+Line 569 
 else
      /* A number of Perl escapes are not handled by PCRE. We give an explicit
      error. */
-     case 'l':
+     case CHAR_l:
-     case 'L':
+     case CHAR_L:
-     case 'N':
+     case CHAR_N:
-     case 'u':
+     case CHAR_u:
-     case 'U':
+     case CHAR_U:
      *errorcodeptr = ERR37;
      break;
-     /* \g must be followed by a number, either plain or braced. If positive, it
+     /* \g must be followed by one of a number of specific things:
-     is an absolute backreference. If negative, it is a relative backreference.
-     This is a Perl 5.10 feature. Perl 5.10 also supports \g{name} as a
+     (1) A number, either plain or braced. If positive, it is an absolute
-     reference to a named group. This is part of Perl's movement towards a
+     backreference. If negative, it is a relative backreference. This is a Perl
-     unified syntax for back references. As this is synonymous with \k{name}, we
+.10 feature.
-     fudge it up by pretending it really was \k. */
+     (2) Perl 5.10 also supports \g{name} as a reference to a named group. This
+     is part of Perl's movement towards a unified syntax for back references. As
+     this is synonymous with \k{name}, we fudge it up by pretending it really
+     was \k.
+     (3) For Oniguruma compatibility we also support \g followed by a name or a
+     number either in angle brackets or in single quotes. However, these are
+     (possibly recursive) subroutine calls, _not_ backreferences. Just return
+     the -ESC_g code (cf \k). */
+     case CHAR_g:
+     if (ptr[1] == CHAR_LESS_THAN_SIGN || ptr[1] == CHAR_APOSTROPHE)
+       {
+       c = -ESC_g;
+       break;
+       }
+     /* Handle the Perl-compatible cases */
-     case 'g':
+     if (ptr[1] == CHAR_LEFT_CURLY_BRACKET)
-     if (ptr[1] == '{')
        {
        const uschar *p;
-       for (p = ptr+2; *p != 0 && *p != '}'; p++)
+       for (p = ptr+2; *p != 0 && *p != CHAR_RIGHT_CURLY_BRACKET; p++)
-         if (*p != '-' && (digitab[*p] & ctype_digit) == 0) break;
+         if (*p != CHAR_MINUS && (digitab[*p] & ctype_digit) == 0) break;
-       if (*p != 0 && *p != '}')
+       if (*p != 0 && *p != CHAR_RIGHT_CURLY_BRACKET)
          {
          c = -ESC_k;
          break;
-Line 489 
 else
+Line 617 
 else
        }
      else braced = FALSE;
-     if (ptr[1] == '-')
+     if (ptr[1] == CHAR_MINUS)
        {
        negated = TRUE;
        ptr++;
-Line 498 
 else
+Line 626 
 else
      c = 0;
      while ((digitab[ptr[1]] & ctype_digit) != 0)
-       c = c * 10 + *(++ptr) - '0';
+       c = c * 10 + *(++ptr) - CHAR_0;
+     if (c < 0)   /* Integer overflow */
+       {
+       *errorcodeptr = ERR61;
+       break;
+       }
-     if (c == 0 || (braced && *(++ptr) != '}'))
+     if (braced && *(++ptr) != CHAR_RIGHT_CURLY_BRACKET)
        {
        *errorcodeptr = ERR57;
-       return 0;
+       break;
+       }
+     if (c == 0)
+       {
+       *errorcodeptr = ERR58;
+       break;
        }
      if (negated)
-Line 511 
 else
+Line 651 
 else
        if (c > bracount)
          {
          *errorcodeptr = ERR15;
-         return 0;
+         break;
          }
        c = bracount - (c - 1);
        }
-Line 531 
 else
+Line 671 
 else
      value is greater than 377, the least significant 8 bits are taken. Inside a
      character class, \ followed by a digit is always an octal number. */
-     case '1': case '2': case '3': case '4': case '5':
+     case CHAR_1: case CHAR_2: case CHAR_3: case CHAR_4: case CHAR_5:
-     case '6': case '7': case '8': case '9':
+     case CHAR_6: case CHAR_7: case CHAR_8: case CHAR_9:
      if (!isclass)
        {
        oldptr = ptr;
-       c -= '0';
+       c -= CHAR_0;
        while ((digitab[ptr[1]] & ctype_digit) != 0)
-         c = c * 10 + *(++ptr) - '0';
+         c = c * 10 + *(++ptr) - CHAR_0;
+       if (c < 0)    /* Integer overflow */
+         {
+         *errorcodeptr = ERR61;
+         break;
+         }
        if (c < 10 || c <= bracount)
          {
          c = -(ESC_REF + c);
-Line 552 
 else
+Line 697 
 else
      generates a binary zero byte and treats the digit as a following literal.
      Thus we have to pull back the pointer by one. */
-     if ((c = *ptr) >= '8')
+     if ((c = *ptr) >= CHAR_8)
        {
        ptr--;
        c = 0;
-Line 565 
 else
+Line 710 
 else
      to do). Nowadays we allow for larger numbers in UTF-8 mode, but no more
      than 3 octal digits. */
-     case '0':
+     case CHAR_0:
-     c -= '0';
+     c -= CHAR_0;
-     while(i++ < 2 && ptr[1] >= '0' && ptr[1] <= '7')
+     while(i++ < 2 && ptr[1] >= CHAR_0 && ptr[1] <= CHAR_7)
-         c = c * 8 + *(++ptr) - '0';
+         c = c * 8 + *(++ptr) - CHAR_0;
      if (!utf8 && c > 255) *errorcodeptr = ERR51;
      break;
-Line 576 
 else
+Line 721 
 else
      than 0xff in utf8 mode, but only if the ddd are hex digits. If not, { is
      treated as a data character. */
-     case 'x':
+     case CHAR_x:
-     if (ptr[1] == '{')
+     if (ptr[1] == CHAR_LEFT_CURLY_BRACKET)
        {
        const uschar *pt = ptr + 2;
        int count = 0;
-Line 586 
 else
+Line 731 
 else
        while ((digitab[*pt] & ctype_xdigit) != 0)
          {
          register int cc = *pt++;
-         if (c == 0 && cc == '0') continue;     /* Leading zeroes */
+         if (c == 0 && cc == CHAR_0) continue;     /* Leading zeroes */
          count++;
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
-         if (cc >= 'a') cc -= 32;               /* Convert to upper case */
+         if (cc >= CHAR_a) cc -= 32;               /* Convert to upper case */
-         c = (c << 4) + cc - ((cc < 'A')? '0' : ('A' - 10));
+         c = (c << 4) + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10));
  #else           /* EBCDIC coding */
-         if (cc >= 'a' && cc <= 'z') cc += 64;  /* Convert to upper case */
+         if (cc >= CHAR_a && cc <= CHAR_z) cc += 64;  /* Convert to upper case */
-         c = (c << 4) + cc - ((cc >= '0')? '0' : ('A' - 10));
+         c = (c << 4) + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10));
  #endif
          }
-       if (*pt == '}')
+       if (*pt == CHAR_RIGHT_CURLY_BRACKET)
          {
          if (c < 0 || count > (utf8? 8 : 2)) *errorcodeptr = ERR34;
          ptr = pt;
-Line 614 
 else
+Line 759 
 else
      c = 0;
      while (i++ < 2 && (digitab[ptr[1]] & ctype_xdigit) != 0)
        {
-       int cc;                               /* Some compilers don't like ++ */
+       int cc;                                  /* Some compilers don't like */
-       cc = *(++ptr);                        /* in initializers */
+       cc = *(++ptr);                           /* ++ in initializers */
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
-       if (cc >= 'a') cc -= 32;              /* Convert to upper case */
+       if (cc >= CHAR_a) cc -= 32;              /* Convert to upper case */
-       c = c * 16 + cc - ((cc < 'A')? '0' : ('A' - 10));
+       c = c * 16 + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10));
  #else           /* EBCDIC coding */
-       if (cc <= 'z') cc += 64;              /* Convert to upper case */
+       if (cc <= CHAR_z) cc += 64;              /* Convert to upper case */
-       c = c * 16 + cc - ((cc >= '0')? '0' : ('A' - 10));
+       c = c * 16 + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10));
  #endif
        }
      break;
-Line 630 
 else
+Line 775 
 else
      This coding is ASCII-specific, but then the whole concept of \cx is
      ASCII-specific. (However, an EBCDIC equivalent has now been added.) */
-     case 'c':
+     case CHAR_c:
      c = *(++ptr);
      if (c == 0)
        {
        *errorcodeptr = ERR2;
-       return 0;
+       break;
        }
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
-     if (c >= 'a' && c <= 'z') c -= 32;
+     if (c >= CHAR_a && c <= CHAR_z) c -= 32;
      c ^= 0x40;
  #else           /* EBCDIC coding */
-     if (c >= 'a' && c <= 'z') c += 64;
+     if (c >= CHAR_a && c <= CHAR_z) c += 64;
      c ^= 0xC0;
  #endif
      break;
      /* PCRE_EXTRA enables extensions to Perl in the matter of escapes. Any
-     other alphameric following \ is an error if PCRE_EXTRA was set; otherwise,
+     other alphanumeric following \ is an error if PCRE_EXTRA was set;
-     for Perl compatibility, it is a literal. This code looks a bit odd, but
+     otherwise, for Perl compatibility, it is a literal. This code looks a bit
-     there used to be some cases other than the default, and there may be again
+     odd, but there used to be some cases other than the default, and there may
-     in future, so I haven't "optimized" it. */
+     be again in future, so I haven't "optimized" it. */
      default:
      if ((options & PCRE_EXTRA) != 0) switch(c)
-Line 704 
 if (c == 0) goto ERROR_RETURN;
+Line 849 
 if (c == 0) goto ERROR_RETURN;
  /* \P or \p can be followed by a name in {}, optionally preceded by ^ for
  negation. */
- if (c == '{')
+ if (c == CHAR_LEFT_CURLY_BRACKET)
    {
-   if (ptr[1] == '^')
+   if (ptr[1] == CHAR_CIRCUMFLEX_ACCENT)
      {
      *negptr = TRUE;
      ptr++;
-Line 715 
 if (c == '{')
+Line 860 
 if (c == '{')
      {
      c = *(++ptr);
      if (c == 0) goto ERROR_RETURN;
-     if (c == '}') break;
+     if (c == CHAR_RIGHT_CURLY_BRACKET) break;
      name[i] = c;
      }
-   if (c !='}') goto ERROR_RETURN;
+   if (c != CHAR_RIGHT_CURLY_BRACKET) goto ERROR_RETURN;
    name[i] = 0;
    }
-Line 740 
 top = _pcre_utt_size;
+Line 885 
 top = _pcre_utt_size;
  while (bot < top)
    {
    i = (bot + top) >> 1;
-   c = strcmp(name, _pcre_utt[i].name);
+   c = strcmp(name, _pcre_utt_names + _pcre_utt[i].name_offset);
    if (c == 0)
      {
      *dptr = _pcre_utt[i].value;
-Line 783 
 is_counted_repeat(const uschar *p)
+Line 928 
 is_counted_repeat(const uschar *p)
  {
  if ((digitab[*p++] & ctype_digit) == 0) return FALSE;
  while ((digitab[*p] & ctype_digit) != 0) p++;
- if (*p == '}') return TRUE;
+ if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE;
- if (*p++ != ',') return FALSE;
+ if (*p++ != CHAR_COMMA) return FALSE;
- if (*p == '}') return TRUE;
+ if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE;
  if ((digitab[*p++] & ctype_digit) == 0) return FALSE;
  while ((digitab[*p] & ctype_digit) != 0) p++;
- return (*p == '}');
+ return (*p == CHAR_RIGHT_CURLY_BRACKET);
  }
-Line 824 
 int max = -1;
+Line 969 
 int max = -1;
  /* Read the minimum value and do a paranoid check: a negative value indicates
  an integer overflow. */
- while ((digitab[*p] & ctype_digit) != 0) min = min * 10 + *p++ - '0';
+ while ((digitab[*p] & ctype_digit) != 0) min = min * 10 + *p++ - CHAR_0;
  if (min < 0 || min > 65535)
    {
    *errorcodeptr = ERR5;
-Line 834 
 if (min < 0 || min > 65535)
+Line 979 
 if (min < 0 || min > 65535)
  /* Read the maximum value if there is one, and again do a paranoid on its size.
  Also, max must not be less than min. */
- if (*p == '}') max = min; else
+ if (*p == CHAR_RIGHT_CURLY_BRACKET) max = min; else
    {
-   if (*(++p) != '}')
+   if (*(++p) != CHAR_RIGHT_CURLY_BRACKET)
      {
      max = 0;
-     while((digitab[*p] & ctype_digit) != 0) max = max * 10 + *p++ - '0';
+     while((digitab[*p] & ctype_digit) != 0) max = max * 10 + *p++ - CHAR_0;
      if (max < 0 || max > 65535)
        {
        *errorcodeptr = ERR5;
-Line 864 
 return p;
+Line 1009 
 return p;
  /*************************************************
- *       Find forward referenced subpattern       *
+ *  Subroutine for finding forward reference      *
  *************************************************/
- /* This function scans along a pattern's text looking for capturing
+ /* This recursive function is called only from find_parens() below. The
+ top-level call starts at the beginning of the pattern. All other calls must
+ start at a parenthesis. It scans along a pattern's text looking for capturing
  subpatterns, and counting them. If it finds a named pattern that matches the
  name it is given, it returns its number. Alternatively, if the name is NULL, it
- returns when it reaches a given numbered subpattern. This is used for forward
+ returns when it reaches a given numbered subpattern. We know that if (?P< is
- references to subpatterns. We know that if (?P< is encountered, the name will
+ encountered, the name will be terminated by '>' because that is checked in the
- be terminated by '>' because that is checked in the first pass.
+ first pass. Recursion is used to keep track of subpatterns that reset the
+ capturing group numbers - the (?| feature.
  Arguments:
-   ptr          current position in the pattern
+   ptrptr       address of the current character pointer (updated)
-   count        current count of capturing parens so far encountered
+   cd           compile background data
    name         name to seek, or NULL if seeking a numbered subpattern
    lorn         name length, or subpattern number if name is NULL
    xmode        TRUE if we are in /x mode
+   count        pointer to the current capturing subpattern number (updated)
  Returns:       the number of the named subpattern, or -1 if not found
  */
  static int
- find_parens(const uschar *ptr, int count, const uschar *name, int lorn,
+ find_parens_sub(uschar **ptrptr, compile_data *cd, const uschar *name, int lorn,
-   BOOL xmode)
+   BOOL xmode, int *count)
  {
- const uschar *thisname;
+ uschar *ptr = *ptrptr;
+ int start_count = *count;
+ int hwm_count = start_count;
+ BOOL dup_parens = FALSE;
- for (; *ptr != 0; ptr++)
+ /* If the first character is a parenthesis, check on the type of group we are
+ dealing with. The very first call may not start with a parenthesis. */
+ if (ptr[0] == CHAR_LEFT_PARENTHESIS)
    {
-   int term;
+   if (ptr[1] == CHAR_QUESTION_MARK &&
+       ptr[2] == CHAR_VERTICAL_LINE)
+     {
+     ptr += 3;
+     dup_parens = TRUE;
+     }
+   /* Handle a normal, unnamed capturing parenthesis */
+   else if (ptr[1] != CHAR_QUESTION_MARK && ptr[1] != CHAR_ASTERISK)
+     {
+     *count += 1;
+     if (name == NULL && *count == lorn) return *count;
+     ptr++;
+     }
+   /* Handle a condition. If it is an assertion, just carry on so that it
+   is processed as normal. If not, skip to the closing parenthesis of the
+   condition (there can't be any nested parens. */
+   else if (ptr[2] == CHAR_LEFT_PARENTHESIS)
+     {
+     ptr += 2;
+     if (ptr[1] != CHAR_QUESTION_MARK)
+       {
+       while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
+       if (*ptr != 0) ptr++;
+       }
+     }
+   /* We have either (? or (* and not a condition */
+   else
+     {
+     ptr += 2;
+     if (*ptr == CHAR_P) ptr++;                      /* Allow optional P */
+     /* We have to disambiguate (?<! and (?<= from (?<name> for named groups */
+     if ((*ptr == CHAR_LESS_THAN_SIGN && ptr[1] != CHAR_EXCLAMATION_MARK &&
+         ptr[1] != CHAR_EQUALS_SIGN) || *ptr == CHAR_APOSTROPHE)
+       {
+       int term;
+       const uschar *thisname;
+       *count += 1;
+       if (name == NULL && *count == lorn) return *count;
+       term = *ptr++;
+       if (term == CHAR_LESS_THAN_SIGN) term = CHAR_GREATER_THAN_SIGN;
+       thisname = ptr;
+       while (*ptr != term) ptr++;
+       if (name != NULL && lorn == ptr - thisname &&
+           strncmp((const char *)name, (const char *)thisname, lorn) == 0)
+         return *count;
+       term++;
+       }
+     }
+   }
+ /* Past any initial parenthesis handling, scan for parentheses or vertical
+ bars. */
+ for (; *ptr != 0; ptr++)
+   {
    /* Skip over backslashed characters and also entire \Q...\E */
-   if (*ptr == '\\')
+   if (*ptr == CHAR_BACKSLASH)
      {
-     if (*(++ptr) == 0) return -1;
+     if (*(++ptr) == 0) goto FAIL_EXIT;
-     if (*ptr == 'Q') for (;;)
+     if (*ptr == CHAR_Q) for (;;)
        {
-       while (*(++ptr) != 0 && *ptr != '\\');
+       while (*(++ptr) != 0 && *ptr != CHAR_BACKSLASH) {};
-       if (*ptr == 0) return -1;
+       if (*ptr == 0) goto FAIL_EXIT;
-       if (*(++ptr) == 'E') break;
+       if (*(++ptr) == CHAR_E) break;
        }
      continue;
      }
-   /* Skip over character classes */
+   /* Skip over character classes; this logic must be similar to the way they
+   are handled for real. If the first character is '^', skip it. Also, if the
+   first few characters (either before or after ^) are \Q\E or \E we skip them
+   too. This makes for compatibility with Perl. Note the use of STR macros to
+   encode "Q\\E" so that it works in UTF-8 on EBCDIC platforms. */
-   if (*ptr == '[')
+   if (*ptr == CHAR_LEFT_SQUARE_BRACKET)
      {
-     while (*(++ptr) != ']')
+     BOOL negate_class = FALSE;
+     for (;;)
+       {
+       if (ptr[1] == CHAR_BACKSLASH)
+         {
+         if (ptr[2] == CHAR_E)
+           ptr+= 2;
+         else if (strncmp((const char *)ptr+2,
+                  STR_Q STR_BACKSLASH STR_E, 3) == 0)
+           ptr += 4;
+         else
+           break;
+         }
+       else if (!negate_class && ptr[1] == CHAR_CIRCUMFLEX_ACCENT)
+         {
+         negate_class = TRUE;
+         ptr++;
+         }
+       else break;
+       }
+     /* If the next character is ']', it is a data character that must be
+     skipped, except in JavaScript compatibility mode. */
+     if (ptr[1] == CHAR_RIGHT_SQUARE_BRACKET &&
+         (cd->external_options & PCRE_JAVASCRIPT_COMPAT) == 0)
+       ptr++;
+     while (*(++ptr) != CHAR_RIGHT_SQUARE_BRACKET)
        {
-       if (*ptr == '\\')
+       if (*ptr == 0) return -1;
+       if (*ptr == CHAR_BACKSLASH)
          {
-         if (*(++ptr) == 0) return -1;
+         if (*(++ptr) == 0) goto FAIL_EXIT;
-         if (*ptr == 'Q') for (;;)
+         if (*ptr == CHAR_Q) for (;;)
            {
-           while (*(++ptr) != 0 && *ptr != '\\');
+           while (*(++ptr) != 0 && *ptr != CHAR_BACKSLASH) {};
-           if (*ptr == 0) return -1;
+           if (*ptr == 0) goto FAIL_EXIT;
-           if (*(++ptr) == 'E') break;
+           if (*(++ptr) == CHAR_E) break;
            }
          continue;
          }
-Line 931 
 for (; *ptr != 0; ptr++)
+Line 1180 
 for (; *ptr != 0; ptr++)
    /* Skip comments in /x mode */
-   if (xmode && *ptr == '#')
+   if (xmode && *ptr == CHAR_NUMBER_SIGN)
      {
-     while (*(++ptr) != 0 && *ptr != '\n');
+     while (*(++ptr) != 0 && *ptr != CHAR_NL) {};
-     if (*ptr == 0) return -1;
+     if (*ptr == 0) goto FAIL_EXIT;
      continue;
      }
-   /* An opening parens must now be a real metacharacter */
+   /* Check for the special metacharacters */
-   if (*ptr != '(') continue;
+   if (*ptr == CHAR_LEFT_PARENTHESIS)
-   if (ptr[1] != '?')
      {
-     count++;
+     int rc = find_parens_sub(&ptr, cd, name, lorn, xmode, count);
-     if (name == NULL && count == lorn) return count;
+     if (rc > 0) return rc;
-     continue;
+     if (*ptr == 0) goto FAIL_EXIT;
+     }
+   else if (*ptr == CHAR_RIGHT_PARENTHESIS)
+     {
+     if (dup_parens && *count < hwm_count) *count = hwm_count;
+     *ptrptr = ptr;
+     return -1;
      }
-   ptr += 2;
+   else if (*ptr == CHAR_VERTICAL_LINE && dup_parens)
-   if (*ptr == 'P') ptr++;                      /* Allow optional P */
+     {
+     if (*count > hwm_count) hwm_count = *count;
+     *count = start_count;
+     }
+   }
+ FAIL_EXIT:
+ *ptrptr = ptr;
+ return -1;
+ }
-   /* We have to disambiguate (?<! and (?<= from (?<name> */
-   if ((*ptr != '<' || ptr[1] == '!' || ptr[1] == '=') &&
-        *ptr != '\'')
-     continue;
-   count++;
-   if (name == NULL && count == lorn) return count;
+ /*************************************************
-   term = *ptr++;
+ *       Find forward referenced subpattern       *
-   if (term == '<') term = '>';
+ *************************************************/
-   thisname = ptr;
-   while (*ptr != term) ptr++;
+ /* This function scans along a pattern's text looking for capturing
-   if (name != NULL && lorn == ptr - thisname &&
+ subpatterns, and counting them. If it finds a named pattern that matches the
-       strncmp((const char *)name, (const char *)thisname, lorn) == 0)
+ name it is given, it returns its number. Alternatively, if the name is NULL, it
-     return count;
+ returns when it reaches a given numbered subpattern. This is used for forward
+ references to subpatterns. We used to be able to start this scan from the
+ current compiling point, using the current count value from cd->bracount, and
+ do it all in a single loop, but the addition of the possibility of duplicate
+ subpattern numbers means that we have to scan from the very start, in order to
+ take account of such duplicates, and to use a recursive function to keep track
+ of the different types of group.
+ Arguments:
+   cd           compile background data
+   name         name to seek, or NULL if seeking a numbered subpattern
+   lorn         name length, or subpattern number if name is NULL
+   xmode        TRUE if we are in /x mode
+ Returns:       the number of the found subpattern, or -1 if not found
+ */
+ static int
+ find_parens(compile_data *cd, const uschar *name, int lorn, BOOL xmode)
+ {
+ uschar *ptr = (uschar *)cd->start_pattern;
+ int count = 0;
+ int rc;
+ /* If the pattern does not start with an opening parenthesis, the first call
+ to find_parens_sub() will scan right to the end (if necessary). However, if it
+ does start with a parenthesis, find_parens_sub() will return when it hits the
+ matching closing parens. That is why we have to have a loop. */
+ for (;;)
+   {
+   rc = find_parens_sub(&ptr, cd, name, lorn, xmode, &count);
+   if (rc > 0 || *ptr++ == 0) break;
    }
- return -1;
+ return rc;
  }
  /*************************************************
  *      Find first significant op code            *
  *************************************************/
-Line 1039 
 for (;;)
+Line 1331 
 for (;;)
  /*************************************************
- *        Find the fixed length of a pattern      *
+ *        Find the fixed length of a branch       *
  *************************************************/
- /* Scan a pattern and compute the fixed length of subject that will match it,
+ /* Scan a branch and compute the fixed length of subject that will match it,
  if the length is fixed. This is needed for dealing with backward assertions.
- In UTF8 mode, the result is in characters rather than bytes.
+ In UTF8 mode, the result is in characters rather than bytes. The branch is
+ temporarily terminated with OP_END when this function is called.
+ This function is called when a backward assertion is encountered, so that if it
+ fails, the error message can point to the correct place in the pattern.
+ However, we cannot do this when the assertion contains subroutine calls,
+ because they can be forward references. We solve this by remembering this case
+ and doing the check at the end; a flag specifies which mode we are running in.
  Arguments:
    code     points to the start of the pattern (the bracket)
    options  the compiling options
+   atend    TRUE if called when the pattern is complete
+   cd       the "compile data" structure
- Returns:   the fixed length, or -1 if there is no fixed length,
+ Returns:   the fixed length,
+              or -1 if there is no fixed length,
               or -2 if \C was encountered
+              or -3 if an OP_RECURSE item was encountered and atend is FALSE
  */
  static int
- find_fixedlength(uschar *code, int options)
+ find_fixedlength(uschar *code, int options, BOOL atend, compile_data *cd)
  {
  int length = -1;
-Line 1068 
 branch, check the length against that of
+Line 1371 
 branch, check the length against that of
  for (;;)
    {
    int d;
+   uschar *ce, *cs;
    register int op = *cc;
    switch (op)
      {
      case OP_CBRA:
      case OP_BRA:
      case OP_ONCE:
      case OP_COND:
-     d = find_fixedlength(cc + ((op == OP_CBRA)? 2:0), options);
+     d = find_fixedlength(cc + ((op == OP_CBRA)? 2:0), options, atend, cd);
      if (d < 0) return d;
      branchlength += d;
      do cc += GET(cc, 1); while (*cc == OP_ALT);
-Line 1098 
 for (;;)
+Line 1401 
 for (;;)
      cc += 1 + LINK_SIZE;
      branchlength = 0;
      break;
+     /* A true recursion implies not fixed length, but a subroutine call may
+     be OK. If the subroutine is a forward reference, we can't deal with
+     it until the end of the pattern, so return -3. */
+     case OP_RECURSE:
+     if (!atend) return -3;
+     cs = ce = (uschar *)cd->start_code + GET(cc, 1);  /* Start subpattern */
+     do ce += GET(ce, 1); while (*ce == OP_ALT);       /* End subpattern */
+     if (cc > cs && cc < ce) return -1;                /* Recursion */
+     d = find_fixedlength(cs + 2, options, atend, cd);
+     if (d < 0) return d;
+     branchlength += d;
+     cc += 1 + LINK_SIZE;
+     break;
      /* Skip over assertive subpatterns */
-Line 1135 
 for (;;)
+Line 1453 
 for (;;)
      branchlength++;
      cc += 2;
  #ifdef SUPPORT_UTF8
-     if ((options & PCRE_UTF8) != 0)
+     if ((options & PCRE_UTF8) != 0 && cc[-1] >= 0xc0)
-       {
+       cc += _pcre_utf8_table4[cc[-1] & 0x3f];
-       while ((*cc & 0xc0) == 0x80) cc++;
-       }
  #endif
      break;
-Line 1149 
 for (;;)
+Line 1465 
 for (;;)
      branchlength += GET2(cc,1);
      cc += 4;
  #ifdef SUPPORT_UTF8
-     if ((options & PCRE_UTF8) != 0)
+     if ((options & PCRE_UTF8) != 0 && cc[-1] >= 0xc0)
-       {
+       cc += _pcre_utf8_table4[cc[-1] & 0x3f];
-       while((*cc & 0x80) == 0x80) cc++;
-       }
  #endif
      break;
      case OP_TYPEEXACT:
      branchlength += GET2(cc,1);
+     if (cc[3] == OP_PROP || cc[3] == OP_NOTPROP) cc += 2;
      cc += 4;
      break;
-Line 1175 
 for (;;)
+Line 1490 
 for (;;)
      case OP_NOT_WORDCHAR:
      case OP_WORDCHAR:
      case OP_ANY:
+     case OP_ALLANY:
      branchlength++;
      cc++;
      break;
-Line 1229 
 for (;;)
+Line 1545 
 for (;;)
  /*************************************************
- *    Scan compiled regex for numbered bracket    *
+ *    Scan compiled regex for specific bracket    *
  *************************************************/
  /* This little function scans through a compiled pattern until it finds a
- capturing bracket with the given number.
+ capturing bracket with the given number, or, if the number is negative, an
+ instance of OP_REVERSE for a lookbehind. The function is global in the C sense
+ so that it can be called from pcre_study() when finding the minimum matching
+ length.
  Arguments:
    code        points to start of expression
    utf8        TRUE in UTF-8 mode
-   number      the required bracket number
+   number      the required bracket number or negative to find a lookbehind
  Returns:      pointer to the opcode for the bracket, or NULL if not found
  */
- static const uschar *
+ const uschar *
- find_bracket(const uschar *code, BOOL utf8, int number)
+ _pcre_find_bracket(const uschar *code, BOOL utf8, int number)
  {
  for (;;)
    {
-Line 1256 
 for (;;)
+Line 1575 
 for (;;)
    the table is zero; the actual length is stored in the compiled code. */
    if (c == OP_XCLASS) code += GET(code, 1);
+   /* Handle recursion */
+   else if (c == OP_REVERSE)
+     {
+     if (number < 0) return (uschar *)code;
+     code += _pcre_OP_lengths[c];
+     }
    /* Handle capturing bracket */
-Line 1266 
 for (;;)
+Line 1593 
 for (;;)
      code += _pcre_OP_lengths[c];
      }
-   /* In UTF-8 mode, opcodes that are followed by a character may be followed by
+   /* Otherwise, we can get the item's length from the table, except that for
-   a multi-byte character. The length in the table is a minimum, so we have to
+   repeated character types, we have to test for \p and \P, which have an extra
-   arrange to skip the extra bytes. */
+   two bytes of parameters. */
    else
      {
+     switch(c)
+       {
+       case OP_TYPESTAR:
+       case OP_TYPEMINSTAR:
+       case OP_TYPEPLUS:
+       case OP_TYPEMINPLUS:
+       case OP_TYPEQUERY:
+       case OP_TYPEMINQUERY:
+       case OP_TYPEPOSSTAR:
+       case OP_TYPEPOSPLUS:
+       case OP_TYPEPOSQUERY:
+       if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
+       break;
+       case OP_TYPEUPTO:
+       case OP_TYPEMINUPTO:
+       case OP_TYPEEXACT:
+       case OP_TYPEPOSUPTO:
+       if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
+       break;
+       }
+     /* Add in the fixed length from the table */
      code += _pcre_OP_lengths[c];
+   /* In UTF-8 mode, opcodes that are followed by a character may be followed by
+   a multi-byte character. The length in the table is a minimum, so we have to
+   arrange to skip the extra bytes. */
  #ifdef SUPPORT_UTF8
      if (utf8) switch(c)
        {
-Line 1294 
 for (;;)
+Line 1650 
 for (;;)
        if (code[-1] >= 0xc0) code += _pcre_utf8_table4[code[-1] & 0x3f];
        break;
        }
+ #else
+     (void)(utf8);  /* Keep compiler happy by referencing function argument */
  #endif
      }
    }
-Line 1330 
 for (;;)
+Line 1688 
 for (;;)
    if (c == OP_XCLASS) code += GET(code, 1);
-   /* Otherwise, we get the item's length from the table. In UTF-8 mode, opcodes
+   /* Otherwise, we can get the item's length from the table, except that for
-   that are followed by a character may be followed by a multi-byte character.
+   repeated character types, we have to test for \p and \P, which have an extra
-   The length in the table is a minimum, so we have to arrange to skip the extra
+   two bytes of parameters. */
-   bytes. */
    else
      {
+     switch(c)
+       {
+       case OP_TYPESTAR:
+       case OP_TYPEMINSTAR:
+       case OP_TYPEPLUS:
+       case OP_TYPEMINPLUS:
+       case OP_TYPEQUERY:
+       case OP_TYPEMINQUERY:
+       case OP_TYPEPOSSTAR:
+       case OP_TYPEPOSPLUS:
+       case OP_TYPEPOSQUERY:
+       if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
+       break;
+       case OP_TYPEPOSUPTO:
+       case OP_TYPEUPTO:
+       case OP_TYPEMINUPTO:
+       case OP_TYPEEXACT:
+       if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
+       break;
+       }
+     /* Add in the fixed length from the table */
      code += _pcre_OP_lengths[c];
+     /* In UTF-8 mode, opcodes that are followed by a character may be followed
+     by a multi-byte character. The length in the table is a minimum, so we have
+     to arrange to skip the extra bytes. */
  #ifdef SUPPORT_UTF8
      if (utf8) switch(c)
        {
-Line 1359 
 for (;;)
+Line 1745 
 for (;;)
        if (code[-1] >= 0xc0) code += _pcre_utf8_table4[code[-1] & 0x3f];
        break;
        }
+ #else
+     (void)(utf8);  /* Keep compiler happy by referencing function argument */
  #endif
      }
    }
-Line 1374 
 for (;;)
+Line 1762 
 for (;;)
  can match the empty string or not. It is called from could_be_empty()
  below and from compile_branch() when checking for an unlimited repeat of a
  group that can match nothing. Note that first_significant_code() skips over
- assertions. If we hit an unclosed bracket, we return "empty" - this means we've
+ backward and negative forward assertions when its final argument is TRUE. If we
- struck an inner bracket whose current branch will already have been scanned.
+ hit an unclosed bracket, we return "empty" - this means we've struck an inner
+ bracket whose current branch will already have been scanned.
  Arguments:
    code        points to start of search
-Line 1397 
 for (code = first_significant_code(code
+Line 1786 
 for (code = first_significant_code(code
    c = *code;
+   /* Skip over forward assertions; the other assertions are skipped by
+   first_significant_code() with a TRUE final argument. */
+   if (c == OP_ASSERT)
+     {
+     do code += GET(code, 1); while (*code == OP_ALT);
+     c = *code;
+     continue;
+     }
    /* Groups with zero repeats can of course be empty; skip them. */
-   if (c == OP_BRAZERO || c == OP_BRAMINZERO)
+   if (c == OP_BRAZERO || c == OP_BRAMINZERO || c == OP_SKIPZERO)
      {
      code += _pcre_OP_lengths[c];
      do code += GET(code, 1); while (*code == OP_ALT);
-Line 1414 
 for (code = first_significant_code(code
+Line 1813 
 for (code = first_significant_code(code
      BOOL empty_branch;
      if (GET(code, 1) == 0) return TRUE;    /* Hit unclosed bracket */
-     /* Scan a closed bracket */
+     /* If a conditional group has only one branch, there is a second, implied,
+     empty branch, so just skip over the conditional, because it could be empty.
+     Otherwise, scan the individual branches of the group. */
-     empty_branch = FALSE;
+     if (c == OP_COND && code[GET(code, 1)] != OP_ALT)
-     do
-       {
-       if (!empty_branch && could_be_empty_branch(code, endcode, utf8))
-         empty_branch = TRUE;
        code += GET(code, 1);
+     else
+       {
+       empty_branch = FALSE;
+       do
+         {
+         if (!empty_branch && could_be_empty_branch(code, endcode, utf8))
+           empty_branch = TRUE;
+         code += GET(code, 1);
+         }
+       while (*code == OP_ALT);
+       if (!empty_branch) return FALSE;   /* All branches are non-empty */
        }
-     while (*code == OP_ALT);
-     if (!empty_branch) return FALSE;   /* All branches are non-empty */
      c = *code;
      continue;
      }
-Line 1433 
 for (code = first_significant_code(code
+Line 1840 
 for (code = first_significant_code(code
    switch (c)
      {
-     /* Check for quantifiers after a class */
+     /* Check for quantifiers after a class. XCLASS is used for classes that
+     cannot be represented just by a bit map. This includes negated single
+     high-valued characters. The length in _pcre_OP_lengths[] is zero; the
+     actual length is stored in the compiled code, so we must update "code"
+     here. */
  #ifdef SUPPORT_UTF8
      case OP_XCLASS:
-     ccode = code + GET(code, 1);
+     ccode = code += GET(code, 1);
      goto CHECK_CLASS_REPEAT;
  #endif
-Line 1481 
 for (code = first_significant_code(code
+Line 1892 
 for (code = first_significant_code(code
      case OP_NOT_WORDCHAR:
      case OP_WORDCHAR:
      case OP_ANY:
+     case OP_ALLANY:
      case OP_ANYBYTE:
      case OP_CHAR:
      case OP_CHARNC:
-Line 1499 
 for (code = first_significant_code(code
+Line 1911 
 for (code = first_significant_code(code
      case OP_TYPEEXACT:
      return FALSE;
+     /* These are going to continue, as they may be empty, but we have to
+     fudge the length for the \p and \P cases. */
+     case OP_TYPESTAR:
+     case OP_TYPEMINSTAR:
+     case OP_TYPEPOSSTAR:
+     case OP_TYPEQUERY:
+     case OP_TYPEMINQUERY:
+     case OP_TYPEPOSQUERY:
+     if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
+     break;
+     /* Same for these */
+     case OP_TYPEUPTO:
+     case OP_TYPEMINUPTO:
+     case OP_TYPEPOSUPTO:
+     if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
+     break;
      /* End of branch */
      case OP_KET:
-Line 1517 
 for (code = first_significant_code(code
+Line 1949 
 for (code = first_significant_code(code
      case OP_QUERY:
      case OP_MINQUERY:
      case OP_POSQUERY:
+     if (utf8 && code[1] >= 0xc0) code += _pcre_utf8_table4[code[1] & 0x3f];
+     break;
      case OP_UPTO:
      case OP_MINUPTO:
      case OP_POSUPTO:
-     if (utf8) while ((code[2] & 0xc0) == 0x80) code++;
+     if (utf8 && code[3] >= 0xc0) code += _pcre_utf8_table4[code[3] & 0x3f];
      break;
  #endif
      }
-Line 1568 
 return TRUE;
+Line 2003 
 return TRUE;
  *************************************************/
  /* This function is called when the sequence "[:" or "[." or "[=" is
- encountered in a character class. It checks whether this is followed by an
+ encountered in a character class. It checks whether this is followed by a
- optional ^ and then a sequence of letters, terminated by a matching ":]" or
+ sequence of characters terminated by a matching ":]" or ".]" or "=]". If we
- ".]" or "=]".
+ reach an unescaped ']' without the special preceding character, return FALSE.
+ Originally, this function only recognized a sequence of letters between the
+ terminators, but it seems that Perl recognizes any sequence of characters,
+ though of course unknown POSIX names are subsequently rejected. Perl gives an
+ "Unknown POSIX class" error for [:f\oo:] for example, where previously PCRE
+ didn't consider this to be a POSIX class. Likewise for [:1234:].
+ The problem in trying to be exactly like Perl is in the handling of escapes. We
+ have to be sure that [abc[:x\]pqr] is *not* treated as containing a POSIX
+ class, but [abc[:x\]pqr:]] is (so that an error can be generated). The code
+ below handles the special case of \], but does not try to do any other escape
+ processing. This makes it different from Perl for cases such as [:l\ower:]
+ where Perl recognizes it as the POSIX class "lower" but PCRE does not recognize
+ "l\ower". This is a lesser evil that not diagnosing bad classes when Perl does,
+ I think.
- Argument:
+ Arguments:
    ptr      pointer to the initial [
    endptr   where to return the end pointer
-   cd       pointer to compile data
  Returns:   TRUE or FALSE
  */
  static BOOL
- check_posix_syntax(const uschar *ptr, const uschar **endptr, compile_data *cd)
+ check_posix_syntax(const uschar *ptr, const uschar **endptr)
  {
  int terminator;          /* Don't combine these lines; the Solaris cc */
  terminator = *(++ptr);   /* compiler warns about "non-constant" initializer. */
- if (*(++ptr) == '^') ptr++;
+ for (++ptr; *ptr != 0; ptr++)
- while ((cd->ctypes[*ptr] & ctype_letter) != 0) ptr++;
- if (*ptr == terminator && ptr[1] == ']')
    {
-   *endptr = ptr;
+   if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET) ptr++; else
-   return TRUE;
+     {
+     if (*ptr == CHAR_RIGHT_SQUARE_BRACKET) return FALSE;
+     if (*ptr == terminator && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
+       {
+       *endptr = ptr;
+       return TRUE;
+       }
+     }
    }
  return FALSE;
  }
-Line 1615 
 Returns:     a value representing the na
+Line 2069 
 Returns:     a value representing the na
  static int
  check_posix_name(const uschar *ptr, int len)
  {
+ const char *pn = posix_names;
  register int yield = 0;
  while (posix_name_lengths[yield] != 0)
    {
    if (len == posix_name_lengths[yield] &&
-     strncmp((const char *)ptr, posix_names[yield], len) == 0) return yield;
+     strncmp((const char *)ptr, pn, len) == 0) return yield;
+   pn += posix_name_lengths[yield] + 1;
    yield++;
    }
  return -1;
-Line 1634 
 return -1;
+Line 2090 
 return -1;
  that is referenced. This means that groups can be replicated for fixed
  repetition simply by copying (because the recursion is allowed to refer to
  earlier groups that are outside the current group). However, when a group is
- optional (i.e. the minimum quantifier is zero), OP_BRAZERO is inserted before
+ optional (i.e. the minimum quantifier is zero), OP_BRAZERO or OP_SKIPZERO is
- it, after it has been compiled. This means that any OP_RECURSE items within it
+ inserted before it, after it has been compiled. This means that any OP_RECURSE
- that refer to the group itself or any contained groups have to have their
+ items within it that refer to the group itself or any contained groups have to
- offsets adjusted. That one of the jobs of this function. Before it is called,
+ have their offsets adjusted. That one of the jobs of this function. Before it
- the partially compiled regex must be temporarily terminated with OP_END.
+ is called, the partially compiled regex must be temporarily terminated with
+ OP_END.
  This function has been extended with the possibility of forward references for
  recursions and subroutine calls. It must also check the list of such references
-Line 1661 
 adjust_recurse(uschar *group, int adjust
+Line 2118 
 adjust_recurse(uschar *group, int adjust
    uschar *save_hwm)
  {
  uschar *ptr = group;
  while ((ptr = (uschar *)find_recurse(ptr, utf8)) != NULL)
    {
    int offset;
-Line 1772 
 get_othercase_range(unsigned int *cptr,
+Line 2230 
 get_othercase_range(unsigned int *cptr,
  unsigned int c, othercase, next;
  for (c = *cptr; c <= d; c++)
-   { if ((othercase = _pcre_ucp_othercase(c)) != NOTACHAR) break; }
+   { if ((othercase = UCD_OTHERCASE(c)) != c) break; }
  if (c > d) return FALSE;
-Line 1781 
 next = othercase + 1;
+Line 2239 
 next = othercase + 1;
  for (++c; c <= d; c++)
    {
-   if (_pcre_ucp_othercase(c) != next) break;
+   if (UCD_OTHERCASE(c) != next) break;
    next++;
    }
-Line 1827 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2285 
 if ((options & PCRE_EXTENDED) != 0)
    for (;;)
      {
      while ((cd->ctypes[*ptr] & ctype_space) != 0) ptr++;
-     if (*ptr == '#')
+     if (*ptr == CHAR_NUMBER_SIGN)
        {
        while (*(++ptr) != 0)
          if (IS_NEWLINE(ptr)) { ptr += cd->nllen; break; }
-Line 1839 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2297 
 if ((options & PCRE_EXTENDED) != 0)
  /* If the next item is one that we can handle, get its value. A non-negative
  value is a character, a negative value is an escape value. */
- if (*ptr == '\\')
+ if (*ptr == CHAR_BACKSLASH)
    {
    int temperrorcode = 0;
    next = check_escape(&ptr, &temperrorcode, cd->bracount, options, FALSE);
-Line 1864 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2322 
 if ((options & PCRE_EXTENDED) != 0)
    for (;;)
      {
      while ((cd->ctypes[*ptr] & ctype_space) != 0) ptr++;
-     if (*ptr == '#')
+     if (*ptr == CHAR_NUMBER_SIGN)
        {
        while (*(++ptr) != 0)
          if (IS_NEWLINE(ptr)) { ptr += cd->nllen; break; }
-Line 1875 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2333 
 if ((options & PCRE_EXTENDED) != 0)
  /* If the next thing is itself optional, we have to give up. */
- if (*ptr == '*' || *ptr == '?' || strncmp((char *)ptr, "{0,", 3) == 0)
+ if (*ptr == CHAR_ASTERISK || *ptr == CHAR_QUESTION_MARK ||
-   return FALSE;
+   strncmp((char *)ptr, STR_LEFT_CURLY_BRACKET STR_0 STR_COMMA, 3) == 0)
+     return FALSE;
  /* Now compare the next item with the previous opcode. If the previous is a
  positive single character match, "item" either contains the character or, if
-Line 1891 
 if (next >= 0) switch(op_code)
+Line 2350 
 if (next >= 0) switch(op_code)
    case OP_CHAR:
  #ifdef SUPPORT_UTF8
    if (utf8 && item > 127) { GETCHAR(item, utf8_char); }
+ #else
+   (void)(utf8_char);  /* Keep compiler happy by referencing function argument */
  #endif
    return item != next;
-Line 1909 
 if (next >= 0) switch(op_code)
+Line 2370 
 if (next >= 0) switch(op_code)
      unsigned int othercase;
      if (next < 128) othercase = cd->fcc[next]; else
  #ifdef SUPPORT_UCP
-     othercase = _pcre_ucp_othercase((unsigned int)next);
+     othercase = UCD_OTHERCASE((unsigned int)next);
  #else
      othercase = NOTACHAR;
  #endif
-Line 1922 
 if (next >= 0) switch(op_code)
+Line 2383 
 if (next >= 0) switch(op_code)
    /* For OP_NOT, "item" must be a single-byte character. */
    case OP_NOT:
-   if (next < 0) return FALSE;  /* Not a character */
    if (item == next) return TRUE;
    if ((options & PCRE_CASELESS) == 0) return FALSE;
  #ifdef SUPPORT_UTF8
-Line 1931 
 if (next >= 0) switch(op_code)
+Line 2391 
 if (next >= 0) switch(op_code)
      unsigned int othercase;
      if (next < 128) othercase = cd->fcc[next]; else
  #ifdef SUPPORT_UCP
-     othercase = _pcre_ucp_othercase(next);
+     othercase = UCD_OTHERCASE(next);
  #else
      othercase = NOTACHAR;
  #endif
-Line 2185 
 uschar classbits[32];
+Line 2645 
 uschar classbits[32];
  BOOL class_utf8;
  BOOL utf8 = (options & PCRE_UTF8) != 0;
  uschar *class_utf8data;
+ uschar *class_utf8data_base;
  uschar utf8_char[6];
  #else
  BOOL utf8 = FALSE;
-Line 2224 
 req_caseopt = ((options & PCRE_CASELESS)
+Line 2685 
 req_caseopt = ((options & PCRE_CASELESS)
  for (;; ptr++)
    {
    BOOL negate_class;
+   BOOL should_flip_negation;
    BOOL possessive_quantifier;
    BOOL is_quantifier;
    BOOL is_recurse;
-Line 2311 
 for (;; ptr++)
+Line 2773 
 for (;; ptr++)
    if (inescq && c != 0)
      {
-     if (c == '\\' && ptr[1] == 'E')
+     if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E)
        {
        inescq = FALSE;
        ptr++;
-Line 2337 
 for (;; ptr++)
+Line 2799 
 for (;; ptr++)
    /* Fill in length of a previous callout, except when the next thing is
    a quantifier. */
-   is_quantifier = c == '*' || c == '+' || c == '?' ||
+   is_quantifier =
-     (c == '{' && is_counted_repeat(ptr+1));
+     c == CHAR_ASTERISK || c == CHAR_PLUS || c == CHAR_QUESTION_MARK ||
+     (c == CHAR_LEFT_CURLY_BRACKET && is_counted_repeat(ptr+1));
    if (!is_quantifier && previous_callout != NULL &&
         after_manual_callout-- <= 0)
-Line 2353 
 for (;; ptr++)
+Line 2816 
 for (;; ptr++)
    if ((options & PCRE_EXTENDED) != 0)
      {
      if ((cd->ctypes[c] & ctype_space) != 0) continue;
-     if (c == '#')
+     if (c == CHAR_NUMBER_SIGN)
        {
        while (*(++ptr) != 0)
          {
-Line 2378 
 for (;; ptr++)
+Line 2841 
 for (;; ptr++)
      {
      /* ===================================================================*/
      case 0:                        /* The branch terminates at string end */
-     case '|':                      /* or | or ) */
+     case CHAR_VERTICAL_LINE:       /* or | or ) */
-     case ')':
+     case CHAR_RIGHT_PARENTHESIS:
      *firstbyteptr = firstbyte;
      *reqbyteptr = reqbyte;
      *codeptr = code;
-Line 2401 
 for (;; ptr++)
+Line 2864 
 for (;; ptr++)
      /* Handle single-character metacharacters. In multiline mode, ^ disables
      the setting of any following char as a first character. */
-     case '^':
+     case CHAR_CIRCUMFLEX_ACCENT:
      if ((options & PCRE_MULTILINE) != 0)
        {
        if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
-Line 2410 
 for (;; ptr++)
+Line 2873 
 for (;; ptr++)
      *code++ = OP_CIRC;
      break;
-     case '$':
+     case CHAR_DOLLAR_SIGN:
      previous = NULL;
      *code++ = OP_DOLL;
      break;
-Line 2418 
 for (;; ptr++)
+Line 2881 
 for (;; ptr++)
      /* There can never be a first char if '.' is first, whatever happens about
      repeats. The value of reqbyte doesn't change either. */
-     case '.':
+     case CHAR_DOT:
      if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
      zerofirstbyte = firstbyte;
      zeroreqbyte = reqbyte;
      previous = code;
-     *code++ = OP_ANY;
+     *code++ = ((options & PCRE_DOTALL) != 0)? OP_ALLANY: OP_ANY;
      break;
-Line 2438 
 for (;; ptr++)
+Line 2901 
 for (;; ptr++)
      opcode is compiled. It may optionally have a bit map for characters < 256,
      but those above are are explicitly listed afterwards. A flag byte tells
      whether the bitmap is present, and whether this is a negated class or not.
-     */
-     case '[':
+     In JavaScript compatibility mode, an isolated ']' causes an error. In
+     default (Perl) mode, it is treated as a data character. */
+     case CHAR_RIGHT_SQUARE_BRACKET:
+     if ((cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0)
+       {
+       *errorcodeptr = ERR64;
+       goto FAILED;
+       }
+     goto NORMAL_CHAR;
+     case CHAR_LEFT_SQUARE_BRACKET:
      previous = code;
      /* PCRE supports POSIX class stuff inside a class. Perl gives an error if
      they are encountered at the top level, so we'll do that too. */
-     if ((ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
+     if ((ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
-         check_posix_syntax(ptr, &tempptr, cd))
+          ptr[1] == CHAR_EQUALS_SIGN) &&
+         check_posix_syntax(ptr, &tempptr))
        {
-       *errorcodeptr = (ptr[1] == ':')? ERR13 : ERR31;
+       *errorcodeptr = (ptr[1] == CHAR_COLON)? ERR13 : ERR31;
        goto FAILED;
        }
-Line 2461 
 for (;; ptr++)
+Line 2935 
 for (;; ptr++)
      for (;;)
        {
        c = *(++ptr);
-       if (c == '\\')
+       if (c == CHAR_BACKSLASH)
          {
-         if (ptr[1] == 'E') ptr++;
+         if (ptr[1] == CHAR_E)
-           else if (strncmp((const char *)ptr+1, "Q\\E", 3) == 0) ptr += 3;
+           ptr++;
-             else break;
+         else if (strncmp((const char *)ptr+1,
+                           STR_Q STR_BACKSLASH STR_E, 3) == 0)
+           ptr += 3;
+         else
+           break;
          }
-       else if (!negate_class && c == '^')
+       else if (!negate_class && c == CHAR_CIRCUMFLEX_ACCENT)
          negate_class = TRUE;
        else break;
        }
+     /* Empty classes are allowed in JavaScript compatibility mode. Otherwise,
+     an initial ']' is taken as a data character -- the code below handles
+     that. In JS mode, [] must always fail, so generate OP_FAIL, whereas
+     [^] must match any character, so generate OP_ALLANY. */
+     if (c == CHAR_RIGHT_SQUARE_BRACKET &&
+         (cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0)
+       {
+       *code++ = negate_class? OP_ALLANY : OP_FAIL;
+       if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
+       zerofirstbyte = firstbyte;
+       break;
+       }
+     /* If a class contains a negative special such as \S, we need to flip the
+     negation flag at the end, so that support for characters > 255 works
+     correctly (they are all included in the class). */
+     should_flip_negation = FALSE;
      /* Keep a count of chars with values < 256 so that we can optimize the case
      of just a single character (as long as it's < 256). However, For higher
      valued UTF-8 characters, we don't yet do any optimization. */
-Line 2489 
 for (;; ptr++)
+Line 2987 
 for (;; ptr++)
  #ifdef SUPPORT_UTF8
      class_utf8 = FALSE;                       /* No chars >= 256 */
      class_utf8data = code + LINK_SIZE + 2;    /* For UTF-8 items */
+     class_utf8data_base = class_utf8data;     /* For resetting in pass 1 */
  #endif
      /* Process characters until ] is reached. By writing this as a "do" it
-Line 2504 
 for (;; ptr++)
+Line 3003 
 for (;; ptr++)
          {                           /* Braces are required because the */
          GETCHARLEN(c, ptr, ptr);    /* macro generates multiple statements */
          }
+       /* In the pre-compile phase, accumulate the length of any UTF-8 extra
+       data and reset the pointer. This is so that very large classes that
+       contain a zillion UTF-8 characters no longer overwrite the work space
+       (which is on the stack). */
+       if (lengthptr != NULL)
+         {
+         *lengthptr += class_utf8data - class_utf8data_base;
+         class_utf8data = class_utf8data_base;
+         }
  #endif
        /* Inside \Q...\E everything is literal except \E */
        if (inescq)
          {
-         if (c == '\\' && ptr[1] == 'E')     /* If we are at \E */
+         if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E)  /* If we are at \E */
            {
            inescq = FALSE;                   /* Reset literal state */
            ptr++;                            /* Skip the 'E' */
-Line 2525 
 for (;; ptr++)
+Line 3036 
 for (;; ptr++)
        [.ch.] and [=ch=] ("collating elements") and fault them, as Perl
 .6 and 5.8 do. */
-       if (c == '[' &&
+       if (c == CHAR_LEFT_SQUARE_BRACKET &&
-           (ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
+           (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
-           check_posix_syntax(ptr, &tempptr, cd))
+            ptr[1] == CHAR_EQUALS_SIGN) && check_posix_syntax(ptr, &tempptr))
          {
          BOOL local_negate = FALSE;
          int posix_class, taboffset, tabopt;
          register const uschar *cbits = cd->cbits;
          uschar pbits[32];
-         if (ptr[1] != ':')
+         if (ptr[1] != CHAR_COLON)
            {
            *errorcodeptr = ERR31;
            goto FAILED;
            }
          ptr += 2;
-         if (*ptr == '^')
+         if (*ptr == CHAR_CIRCUMFLEX_ACCENT)
            {
            local_negate = TRUE;
+           should_flip_negation = TRUE;  /* Note negative special */
            ptr++;
            }
-Line 2613 
 for (;; ptr++)
+Line 3125 
 for (;; ptr++)
        to 'or' into the one we are building. We assume they have more than one
        character in them, so set class_charcount bigger than one. */
-       if (c == '\\')
+       if (c == CHAR_BACKSLASH)
          {
          c = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE);
          if (*errorcodeptr != 0) goto FAILED;
-         if (-c == ESC_b) c = '\b';       /* \b is backslash in a class */
+         if (-c == ESC_b) c = CHAR_BS;       /* \b is backspace in a class */
-         else if (-c == ESC_X) c = 'X';   /* \X is literal X in a class */
+         else if (-c == ESC_X) c = CHAR_X;   /* \X is literal X in a class */
-         else if (-c == ESC_R) c = 'R';   /* \R is literal R in a class */
+         else if (-c == ESC_R) c = CHAR_R;   /* \R is literal R in a class */
          else if (-c == ESC_Q)            /* Handle start of quoted string */
            {
-           if (ptr[1] == '\\' && ptr[2] == 'E')
+           if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
              {
              ptr += 2; /* avoid empty string */
              }
            else inescq = TRUE;
            continue;
            }
+         else if (-c == ESC_E) continue;  /* Ignore orphan \E */
          if (c < 0)
            {
-Line 2645 
 for (;; ptr++)
+Line 3158 
 for (;; ptr++)
              continue;
              case ESC_D:
+             should_flip_negation = TRUE;
              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_digit];
              continue;
-Line 2653 
 for (;; ptr++)
+Line 3167 
 for (;; ptr++)
              continue;
              case ESC_W:
+             should_flip_negation = TRUE;
              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_word];
              continue;
-Line 2662 
 for (;; ptr++)
+Line 3177 
 for (;; ptr++)
              continue;
              case ESC_S:
+             should_flip_negation = TRUE;
              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_space];
              classbits[1] |= 0x08;    /* Perl 5.004 onwards omits VT from \s */
              continue;
-             case ESC_E: /* Perl ignores an orphan \E */
-             continue;
              default:    /* Not recognized; fall through */
              break;      /* Need "default" setting to stop compiler warning. */
              }
-Line 2848 
 for (;; ptr++)
+Line 3361 
 for (;; ptr++)
        entirely. The code for handling \Q and \E is messy. */
        CHECK_RANGE:
-       while (ptr[1] == '\\' && ptr[2] == 'E')
+       while (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
          {
          inescq = FALSE;
          ptr += 2;
-Line 2856 
 for (;; ptr++)
+Line 3369 
 for (;; ptr++)
        oldptr = ptr;
-       if (!inescq && ptr[1] == '-')
+       /* Remember \r or \n */
+       if (c == CHAR_CR || c == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF;
+       /* Check for range */
+       if (!inescq && ptr[1] == CHAR_MINUS)
          {
          int d;
          ptr += 2;
-         while (*ptr == '\\' && ptr[1] == 'E') ptr += 2;
+         while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E) ptr += 2;
          /* If we hit \Q (not followed by \E) at this point, go into escaped
          mode. */
-         while (*ptr == '\\' && ptr[1] == 'Q')
+         while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_Q)
            {
            ptr += 2;
-           if (*ptr == '\\' && ptr[1] == 'E') { ptr += 2; continue; }
+           if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E)
+             { ptr += 2; continue; }
            inescq = TRUE;
            break;
            }
-         if (*ptr == 0 || (!inescq && *ptr == ']'))
+         if (*ptr == 0 || (!inescq && *ptr == CHAR_RIGHT_SQUARE_BRACKET))
            {
            ptr = oldptr;
            goto LONE_SINGLE_CHARACTER;
-Line 2892 
 for (;; ptr++)
+Line 3412 
 for (;; ptr++)
          not any of the other escapes. Perl 5.6 treats a hyphen as a literal
          in such circumstances. */
-         if (!inescq && d == '\\')
+         if (!inescq && d == CHAR_BACKSLASH)
            {
            d = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE);
            if (*errorcodeptr != 0) goto FAILED;
-           /* \b is backslash; \X is literal X; \R is literal R; any other
+           /* \b is backspace; \X is literal X; \R is literal R; any other
            special means the '-' was literal */
            if (d < 0)
              {
-             if (d == -ESC_b) d = '\b';
+             if (d == -ESC_b) d = CHAR_BS;
-             else if (d == -ESC_X) d = 'X';
+             else if (d == -ESC_X) d = CHAR_X;
-             else if (d == -ESC_R) d = 'R'; else
+             else if (d == -ESC_R) d = CHAR_R; else
                {
                ptr = oldptr;
                goto LONE_SINGLE_CHARACTER;  /* A few lines below */
-Line 2923 
 for (;; ptr++)
+Line 3443 
 for (;; ptr++)
          if (d == c) goto LONE_SINGLE_CHARACTER;  /* A few lines below */
+         /* Remember \r or \n */
+         if (d == CHAR_CR || d == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF;
          /* In UTF-8 mode, if the upper limit is > 255, or > 127 for caseless
          matching, we have to use an XCLASS with extra data items. Caseless
          matching for characters > 127 is available only if UCP support is
-Line 3041 
 for (;; ptr++)
+Line 3565 
 for (;; ptr++)
          if ((options & PCRE_CASELESS) != 0)
            {
            unsigned int othercase;
-           if ((othercase = _pcre_ucp_othercase(c)) != NOTACHAR)
+           if ((othercase = UCD_OTHERCASE(c)) != c)
              {
              *class_utf8data++ = XCL_SINGLE;
              class_utf8data += _pcre_ord2utf8(othercase, class_utf8data);
-Line 3068 
 for (;; ptr++)
+Line 3592 
 for (;; ptr++)
      /* Loop until ']' reached. This "while" is the end of the "do" above. */
-     while ((c = *(++ptr)) != 0 && (c != ']' || inescq));
+     while ((c = *(++ptr)) != 0 && (c != CHAR_RIGHT_SQUARE_BRACKET || inescq));
      if (c == 0)                          /* Missing terminating ']' */
        {
-Line 3076 
 for (;; ptr++)
+Line 3600 
 for (;; ptr++)
        goto FAILED;
        }
+ /* This code has been disabled because it would mean that \s counts as
+ an explicit \r or \n reference, and that's not really what is wanted. Now
+ we set the flag only if there is a literal "\r" or "\n" in the class. */
+ #if 0
+     /* Remember whether \r or \n are in this class */
+     if (negate_class)
+       {
+       if ((classbits[1] & 0x24) != 0x24) cd->external_flags |= PCRE_HASCRORLF;
+       }
+     else
+       {
+       if ((classbits[1] & 0x24) != 0) cd->external_flags |= PCRE_HASCRORLF;
+       }
+ #endif
      /* If class_charcount is 1, we saw precisely one character whose value is
-     less than 256. In non-UTF-8 mode we can always optimize. In UTF-8 mode, we
+     less than 256. As long as there were no characters >= 128 and there was no
-     can optimize the negative case only if there were no characters >= 128
+     use of \p or \P, in other words, no use of any XCLASS features, we can
-     because OP_NOT and the related opcodes like OP_NOTSTAR operate on
+     optimize.
-     single-bytes only. This is an historical hangover. Maybe one day we can
-     tidy these opcodes to handle multi-byte characters.
+     In UTF-8 mode, we can optimize the negative case only if there were no
+     characters >= 128 because OP_NOT and the related opcodes like OP_NOTSTAR
+     operate on single-bytes only. This is an historical hangover. Maybe one day
+     we can tidy these opcodes to handle multi-byte characters.
      The optimization throws away the bit map. We turn the item into a
 -character OP_CHAR[NC] if it's positive, or OP_NOT if it's negative. Note
-Line 3091 
 for (;; ptr++)
+Line 3637 
 for (;; ptr++)
      reqbyte, save the previous value for reinstating. */
  #ifdef SUPPORT_UTF8
-     if (class_charcount == 1 &&
+     if (class_charcount == 1 && !class_utf8 &&
-           (!utf8 ||
+       (!utf8 || !negate_class || class_lastchar < 128))
-           (!class_utf8 && (!negate_class || class_lastchar < 128))))
  #else
      if (class_charcount == 1)
  #endif
-Line 3137 
 for (;; ptr++)
+Line 3681 
 for (;; ptr++)
      zeroreqbyte = reqbyte;
      /* If there are characters with values > 255, we have to compile an
-     extended class, with its own opcode. If there are no characters < 256,
+     extended class, with its own opcode, unless there was a negated special
-     we can omit the bitmap in the actual compiled code. */
+     such as \S in the class, because in that case all characters > 255 are in
+     the class, so any that were explicitly given as well can be ignored. If
+     (when there are explicit characters > 255 that must be listed) there are no
+     characters < 256, we can omit the bitmap in the actual compiled code. */
  #ifdef SUPPORT_UTF8
-     if (class_utf8)
+     if (class_utf8 && !should_flip_negation)
        {
        *class_utf8data++ = XCL_END;    /* Marks the end of extra data */
        *code++ = OP_XCLASS;
-Line 3167 
 for (;; ptr++)
+Line 3714 
 for (;; ptr++)
        }
  #endif
-     /* If there are no characters > 255, negate the 32-byte map if necessary,
+     /* If there are no characters > 255, set the opcode to OP_CLASS or
-     and copy it into the code vector. If this is the first thing in the branch,
+     OP_NCLASS, depending on whether the whole class was negated and whether
-     there can be no first char setting, whatever the repeat count. Any reqbyte
+     there were negative specials such as \S in the class. Then copy the 32-byte
-     setting must remain unchanged after any kind of repeat. */
+     map into the code vector, negating it if necessary. */
+     *code++ = (negate_class == should_flip_negation) ? OP_CLASS : OP_NCLASS;
      if (negate_class)
        {
-       *code++ = OP_NCLASS;
        if (lengthptr == NULL)    /* Save time in the pre-compile phase */
          for (c = 0; c < 32; c++) code[c] = ~classbits[c];
        }
      else
        {
-       *code++ = OP_CLASS;
        memcpy(code, classbits, 32);
        }
      code += 32;
-Line 3191 
 for (;; ptr++)
+Line 3737 
 for (;; ptr++)
      /* Various kinds of repeat; '{' is not necessarily a quantifier, but this
      has been tested above. */
-     case '{':
+     case CHAR_LEFT_CURLY_BRACKET:
      if (!is_quantifier) goto NORMAL_CHAR;
      ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorcodeptr);
      if (*errorcodeptr != 0) goto FAILED;
      goto REPEAT;
-     case '*':
+     case CHAR_ASTERISK:
      repeat_min = 0;
      repeat_max = -1;
      goto REPEAT;
-     case '+':
+     case CHAR_PLUS:
      repeat_min = 1;
      repeat_max = -1;
      goto REPEAT;
-     case '?':
+     case CHAR_QUESTION_MARK:
      repeat_min = 0;
      repeat_max = 1;
-Line 3242 
 for (;; ptr++)
+Line 3788 
 for (;; ptr++)
      but if PCRE_UNGREEDY is set, it works the other way round. We change the
      repeat type to the non-default. */
-     if (ptr[1] == '+')
+     if (ptr[1] == CHAR_PLUS)
        {
        repeat_type = 0;                  /* Force greedy */
        possessive_quantifier = TRUE;
        ptr++;
        }
-     else if (ptr[1] == '?')
+     else if (ptr[1] == CHAR_QUESTION_MARK)
        {
        repeat_type = greedy_non_default;
        ptr++;
-Line 3363 
 for (;; ptr++)
+Line 3909 
 for (;; ptr++)
        if (repeat_max == 0) goto END_REPEAT;
+       /*--------------------------------------------------------------------*/
+       /* This code is obsolete from release 8.00; the restriction was finally
+       removed: */
        /* All real repeats make it impossible to handle partial matching (maybe
        one day we will be able to remove this restriction). */
-       if (repeat_max != 1) cd->nopartial = TRUE;
+       /* if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL; */
+       /*--------------------------------------------------------------------*/
        /* Combine the op_type with the repeat_type */
-Line 3513 
 for (;; ptr++)
+Line 4064 
 for (;; ptr++)
          goto END_REPEAT;
          }
+       /*--------------------------------------------------------------------*/
+       /* This code is obsolete from release 8.00; the restriction was finally
+       removed: */
        /* All real repeats make it impossible to handle partial matching (maybe
        one day we will be able to remove this restriction). */
-       if (repeat_max != 1) cd->nopartial = TRUE;
+       /* if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL; */
+       /*--------------------------------------------------------------------*/
        if (repeat_min == 0 && repeat_max == -1)
          *code++ = OP_CRSTAR + repeat_type;
-Line 3574 
 for (;; ptr++)
+Line 4130 
 for (;; ptr++)
        if (repeat_min == 0)
          {
-         /* If the maximum is also zero, we just omit the group from the output
+         /* If the maximum is also zero, we used to just omit the group from the
-         altogether. */
+         output altogether, like this:
-         if (repeat_max == 0)
+         ** if (repeat_max == 0)
-           {
+         **   {
-           code = previous;
+         **   code = previous;
-           goto END_REPEAT;
+         **   goto END_REPEAT;
-           }
+         **   }
+         However, that fails when a group is referenced as a subroutine from
+         elsewhere in the pattern, so now we stick in OP_SKIPZERO in front of it
+         so that it is skipped on execution. As we don't have a list of which
+         groups are referenced, we cannot do this selectively.
+         If the maximum is 1 or unlimited, we just have to stick in the BRAZERO
+         and do no more at this point. However, we do need to adjust any
+         OP_RECURSE calls inside the group that refer to the group itself or any
+         internal or forward referenced group, because the offset is from the
+         start of the whole regex. Temporarily terminate the pattern while doing
+         this. */
-         /* If the maximum is 1 or unlimited, we just have to stick in the
+         if (repeat_max <= 1)    /* Covers 0, 1, and unlimited */
-         BRAZERO and do no more at this point. However, we do need to adjust
-         any OP_RECURSE calls inside the group that refer to the group itself or
-         any internal or forward referenced group, because the offset is from
-         the start of the whole regex. Temporarily terminate the pattern while
-         doing this. */
-         if (repeat_max <= 1)
            {
            *code = OP_END;
            adjust_recurse(previous, 1, utf8, cd, save_hwm);
            memmove(previous+1, previous, len);
            code++;
+           if (repeat_max == 0)
+             {
+             *previous++ = OP_SKIPZERO;
+             goto END_REPEAT;
+             }
            *previous++ = OP_BRAZERO + repeat_type;
            }
-Line 3790 
 for (;; ptr++)
+Line 4356 
 for (;; ptr++)
          }
        }
+     /* If previous is OP_FAIL, it was generated by an empty class [] in
+     JavaScript mode. The other ways in which OP_FAIL can be generated, that is
+     by (*FAIL) or (?!) set previous to NULL, which gives a "nothing to repeat"
+     error above. We can just ignore the repeat in JS case. */
+     else if (*previous == OP_FAIL) goto END_REPEAT;
      /* Else there's some kind of shambles */
      else
-Line 3814 
 for (;; ptr++)
+Line 4387 
 for (;; ptr++)
      if (possessive_quantifier)
        {
        int len;
-       if (*tempcode == OP_EXACT || *tempcode == OP_TYPEEXACT ||
-           *tempcode == OP_NOTEXACT)
+       if (*tempcode == OP_TYPEEXACT)
+         tempcode += _pcre_OP_lengths[*tempcode] +
+           ((tempcode[3] == OP_PROP || tempcode[3] == OP_NOTPROP)? 2 : 0);
+       else if (*tempcode == OP_EXACT || *tempcode == OP_NOTEXACT)
+         {
          tempcode += _pcre_OP_lengths[*tempcode];
+ #ifdef SUPPORT_UTF8
+         if (utf8 && tempcode[-1] >= 0xc0)
+           tempcode += _pcre_utf8_table4[tempcode[-1] & 0x3f];
+ #endif
+         }
        len = code - tempcode;
        if (len > 0) switch (*tempcode)
          {
-Line 3860 
 for (;; ptr++)
+Line 4444 
 for (;; ptr++)
      /* ===================================================================*/
      /* Start of nested parenthesized sub-expression, or comment or lookahead or
      lookbehind or option setting or condition or all the other extended
-     parenthesis forms. First deal with the specials; all are introduced by ?,
+     parenthesis forms.  */
-     and the appearance of any of them means that this is not a capturing
-     group. */
-     case '(':
+     case CHAR_LEFT_PARENTHESIS:
      newoptions = options;
      skipbytes = 0;
      bravalue = OP_CBRA;
      save_hwm = cd->hwm;
      reset_bracount = FALSE;
-     if (*(++ptr) == '?')
+     /* First deal with various "verbs" that can be introduced by '*'. */
+     if (*(++ptr) == CHAR_ASTERISK && (cd->ctypes[ptr[1]] & ctype_letter) != 0)
+       {
+       int i, namelen;
+       const char *vn = verbnames;
+       const uschar *name = ++ptr;
+       previous = NULL;
+       while ((cd->ctypes[*++ptr] & ctype_letter) != 0) {};
+       if (*ptr == CHAR_COLON)
+         {
+         *errorcodeptr = ERR59;   /* Not supported */
+         goto FAILED;
+         }
+       if (*ptr != CHAR_RIGHT_PARENTHESIS)
+         {
+         *errorcodeptr = ERR60;
+         goto FAILED;
+         }
+       namelen = ptr - name;
+       for (i = 0; i < verbcount; i++)
+         {
+         if (namelen == verbs[i].len &&
+             strncmp((char *)name, vn, namelen) == 0)
+           {
+           /* Check for open captures before ACCEPT */
+           if (verbs[i].op == OP_ACCEPT)
+             {
+             open_capitem *oc;
+             cd->had_accept = TRUE;
+             for (oc = cd->open_caps; oc != NULL; oc = oc->next)
+               {
+               *code++ = OP_CLOSE;
+               PUT2INC(code, 0, oc->number);
+               }
+             }
+           *code++ = verbs[i].op;
+           break;
+           }
+         vn += verbs[i].len + 1;
+         }
+       if (i < verbcount) continue;
+       *errorcodeptr = ERR60;
+       goto FAILED;
+       }
+     /* Deal with the extended parentheses; all are introduced by '?', and the
+     appearance of any of them means that this is not a capturing group. */
+     else if (*ptr == CHAR_QUESTION_MARK)
        {
        int i, set, unset, namelen;
        int *optset;
-Line 3880 
 for (;; ptr++)
+Line 4512 
 for (;; ptr++)
        switch (*(++ptr))
          {
-         case '#':                 /* Comment; skip to ket */
+         case CHAR_NUMBER_SIGN:                 /* Comment; skip to ket */
          ptr++;
-         while (*ptr != 0 && *ptr != ')') ptr++;
+         while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
          if (*ptr == 0)
            {
            *errorcodeptr = ERR18;
-Line 3892 
 for (;; ptr++)
+Line 4524 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
-         case '|':                 /* Reset capture count for each branch */
+         case CHAR_VERTICAL_LINE:  /* Reset capture count for each branch */
          reset_bracount = TRUE;
          /* Fall through */
          /* ------------------------------------------------------------ */
-         case ':':                 /* Non-capturing bracket */
+         case CHAR_COLON:          /* Non-capturing bracket */
          bravalue = OP_BRA;
          ptr++;
          break;
          /* ------------------------------------------------------------ */
-         case '(':
+         case CHAR_LEFT_PARENTHESIS:
          bravalue = OP_COND;       /* Conditional group */
          /* A condition can be an assertion, a number (referring to a numbered
-Line 3924 
 for (;; ptr++)
+Line 4556 
 for (;; ptr++)
          the switch. This will take control down to where bracketed groups,
          including assertions, are processed. */
-         if (ptr[1] == '?' && (ptr[2] == '=' || ptr[2] == '!' || ptr[2] == '<'))
+         if (ptr[1] == CHAR_QUESTION_MARK && (ptr[2] == CHAR_EQUALS_SIGN ||
+             ptr[2] == CHAR_EXCLAMATION_MARK || ptr[2] == CHAR_LESS_THAN_SIGN))
            break;
          /* Most other conditions use OP_CREF (a couple change to OP_RREF
-Line 3936 
 for (;; ptr++)
+Line 4569 
 for (;; ptr++)
          /* Check for a test for recursion in a named group. */
-         if (ptr[1] == 'R' && ptr[2] == '&')
+         if (ptr[1] == CHAR_R && ptr[2] == CHAR_AMPERSAND)
            {
            terminator = -1;
            ptr += 2;
-Line 3946 
 for (;; ptr++)
+Line 4579 
 for (;; ptr++)
          /* Check for a test for a named group's having been set, using the Perl
          syntax (?(<name>) or (?('name') */
-         else if (ptr[1] == '<')
+         else if (ptr[1] == CHAR_LESS_THAN_SIGN)
            {
-           terminator = '>';
+           terminator = CHAR_GREATER_THAN_SIGN;
            ptr++;
            }
-         else if (ptr[1] == '\'')
+         else if (ptr[1] == CHAR_APOSTROPHE)
            {
-           terminator = '\'';
+           terminator = CHAR_APOSTROPHE;
            ptr++;
            }
          else
            {
            terminator = 0;
-           if (ptr[1] == '-' || ptr[1] == '+') refsign = *(++ptr);
+           if (ptr[1] == CHAR_MINUS || ptr[1] == CHAR_PLUS) refsign = *(++ptr);
            }
          /* We now expect to read a name; any thing else is an error */
-Line 3979 
 for (;; ptr++)
+Line 4612 
 for (;; ptr++)
            {
            if (recno >= 0)
              recno = ((digitab[*ptr] & ctype_digit) != 0)?
-               recno * 10 + *ptr - '0' : -1;
+               recno * 10 + *ptr - CHAR_0 : -1;
            ptr++;
            }
          namelen = ptr - name;
-         if ((terminator > 0 && *ptr++ != terminator) || *ptr++ != ')')
+         if ((terminator > 0 && *ptr++ != terminator) ||
+             *ptr++ != CHAR_RIGHT_PARENTHESIS)
            {
            ptr--;      /* Error offset */
            *errorcodeptr = ERR26;
-Line 4006 
 for (;; ptr++)
+Line 4640 
 for (;; ptr++)
              *errorcodeptr = ERR58;
              goto FAILED;
              }
-           if (refsign == '-')
+           recno = (refsign == CHAR_MINUS)?
+             cd->bracount - recno + 1 : recno +cd->bracount;
+           if (recno <= 0 || recno > cd->final_bracount)
              {
-             recno = cd->bracount - recno + 1;
+             *errorcodeptr = ERR15;
-             if (recno <= 0)
+             goto FAILED;
-               {
-               *errorcodeptr = ERR15;
-               goto FAILED;
-               }
              }
-           else recno += cd->bracount;
            PUT2(code, 2+LINK_SIZE, recno);
            break;
            }
-Line 4040 
 for (;; ptr++)
+Line 4671 
 for (;; ptr++)
          /* Search the pattern for a forward reference */
-         else if ((i = find_parens(ptr, cd->bracount, name, namelen,
+         else if ((i = find_parens(cd, name, namelen,
                          (options & PCRE_EXTENDED) != 0)) > 0)
            {
            PUT2(code, 2+LINK_SIZE, i);
-Line 4061 
 for (;; ptr++)
+Line 4692 
 for (;; ptr++)
          /* Check for (?(R) for recursion. Allow digits after R to specify a
          specific group number. */
-         else if (*name == 'R')
+         else if (*name == CHAR_R)
            {
            recno = 0;
            for (i = 1; i < namelen; i++)
-Line 4071 
 for (;; ptr++)
+Line 4702 
 for (;; ptr++)
                *errorcodeptr = ERR15;
                goto FAILED;
                }
-             recno = recno * 10 + name[i] - '0';
+             recno = recno * 10 + name[i] - CHAR_0;
              }
            if (recno == 0) recno = RREF_ANY;
            code[1+LINK_SIZE] = OP_RREF;      /* Change test type */
-Line 4081 
 for (;; ptr++)
+Line 4712 
 for (;; ptr++)
          /* Similarly, check for the (?(DEFINE) "condition", which is always
          false. */
-         else if (namelen == 6 && strncmp((char *)name, "DEFINE", 6) == 0)
+         else if (namelen == 6 && strncmp((char *)name, STRING_DEFINE, 6) == 0)
            {
            code[1+LINK_SIZE] = OP_DEF;
            skipbytes = 1;
            }
-         /* Check for the "name" actually being a subpattern number. */
+         /* Check for the "name" actually being a subpattern number. We are
+         in the second pass here, so final_bracount is set. */
-         else if (recno > 0)
+         else if (recno > 0 && recno <= cd->final_bracount)
            {
            PUT2(code, 2+LINK_SIZE, recno);
            }
-Line 4105 
 for (;; ptr++)
+Line 4737 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
-         case '=':                 /* Positive lookahead */
+         case CHAR_EQUALS_SIGN:                 /* Positive lookahead */
          bravalue = OP_ASSERT;
          ptr++;
          break;
          /* ------------------------------------------------------------ */
-         case '!':                 /* Negative lookahead */
+         case CHAR_EXCLAMATION_MARK:            /* Negative lookahead */
-         bravalue = OP_ASSERT_NOT;
          ptr++;
+         if (*ptr == CHAR_RIGHT_PARENTHESIS)    /* Optimize (?!) */
+           {
+           *code++ = OP_FAIL;
+           previous = NULL;
+           continue;
+           }
+         bravalue = OP_ASSERT_NOT;
          break;
          /* ------------------------------------------------------------ */
-         case '<':                 /* Lookbehind or named define */
+         case CHAR_LESS_THAN_SIGN:              /* Lookbehind or named define */
          switch (ptr[1])
            {
-           case '=':               /* Positive lookbehind */
+           case CHAR_EQUALS_SIGN:               /* Positive lookbehind */
            bravalue = OP_ASSERTBACK;
            ptr += 2;
            break;
-           case '!':               /* Negative lookbehind */
+           case CHAR_EXCLAMATION_MARK:          /* Negative lookbehind */
            bravalue = OP_ASSERTBACK_NOT;
            ptr += 2;
            break;
-Line 4142 
 for (;; ptr++)
+Line 4780 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
-         case '>':                 /* One-time brackets */
+         case CHAR_GREATER_THAN_SIGN:           /* One-time brackets */
          bravalue = OP_ONCE;
          ptr++;
          break;
          /* ------------------------------------------------------------ */
-         case 'C':                 /* Callout - may be followed by digits; */
+         case CHAR_C:                 /* Callout - may be followed by digits; */
          previous_callout = code;  /* Save for later completion */
          after_manual_callout = 1; /* Skip one item before completing */
          *code++ = OP_CALLOUT;
            {
            int n = 0;
            while ((digitab[*(++ptr)] & ctype_digit) != 0)
-             n = n * 10 + *ptr - '0';
+             n = n * 10 + *ptr - CHAR_0;
-           if (*ptr != ')')
+           if (*ptr != CHAR_RIGHT_PARENTHESIS)
              {
              *errorcodeptr = ERR39;
              goto FAILED;
-Line 4177 
 for (;; ptr++)
+Line 4815 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
-         case 'P':                 /* Python-style named subpattern handling */
+         case CHAR_P:              /* Python-style named subpattern handling */
-         if (*(++ptr) == '=' || *ptr == '>')  /* Reference or recursion */
+         if (*(++ptr) == CHAR_EQUALS_SIGN ||
+             *ptr == CHAR_GREATER_THAN_SIGN)  /* Reference or recursion */
            {
-           is_recurse = *ptr == '>';
+           is_recurse = *ptr == CHAR_GREATER_THAN_SIGN;
-           terminator = ')';
+           terminator = CHAR_RIGHT_PARENTHESIS;
            goto NAMED_REF_OR_RECURSE;
            }
-         else if (*ptr != '<')    /* Test for Python-style definition */
+         else if (*ptr != CHAR_LESS_THAN_SIGN)  /* Test for Python-style defn */
            {
            *errorcodeptr = ERR41;
            goto FAILED;
-Line 4194 
 for (;; ptr++)
+Line 4833 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
          DEFINE_NAME:    /* Come here from (?< handling */
-         case '\'':
+         case CHAR_APOSTROPHE:
            {
-           terminator = (*ptr == '<')? '>' : '\'';
+           terminator = (*ptr == CHAR_LESS_THAN_SIGN)?
+             CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE;
            name = ++ptr;
            while ((cd->ctypes[*ptr] & ctype_word) != 0) ptr++;
-Line 4270 
 for (;; ptr++)
+Line 4910 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
-         case '&':                 /* Perl recursion/subroutine syntax */
+         case CHAR_AMPERSAND:            /* Perl recursion/subroutine syntax */
-         terminator = ')';
+         terminator = CHAR_RIGHT_PARENTHESIS;
          is_recurse = TRUE;
          /* Fall through */
          /* We come here from the Python syntax above that handles both
          references (?P=name) and recursion (?P>name), as well as falling
-         through from the Perl recursion syntax (?&name). */
+         through from the Perl recursion syntax (?&name). We also come here from
+         the Perl \k<name> or \k'name' back reference syntax and the \k{name}
+         .NET syntax, and the Oniguruma \g<...> and \g'...' subroutine syntax. */
          NAMED_REF_OR_RECURSE:
          name = ++ptr;
-Line 4289 
 for (;; ptr++)
+Line 4931 
 for (;; ptr++)
          if (lengthptr != NULL)
            {
+           if (namelen == 0)
+             {
+             *errorcodeptr = ERR62;
+             goto FAILED;
+             }
            if (*ptr != terminator)
              {
              *errorcodeptr = ERR42;
-Line 4302 
 for (;; ptr++)
+Line 4949 
 for (;; ptr++)
            recno = 0;
            }
-         /* In the real compile, seek the name in the table */
+         /* In the real compile, seek the name in the table. We check the name
+         first, and then check that we have reached the end of the name in the
+         table. That way, if the name that is longer than any in the table,
+         the comparison will fail without reading beyond the table entry. */
          else
            {
            slot = cd->name_table;
            for (i = 0; i < cd->names_found; i++)
              {
-             if (strncmp((char *)name, (char *)slot+2, namelen) == 0) break;
+             if (strncmp((char *)name, (char *)slot+2, namelen) == 0 &&
+                 slot[2+namelen] == 0)
+               break;
              slot += cd->name_entry_size;
              }
-Line 4318 
 for (;; ptr++)
+Line 4970 
 for (;; ptr++)
              recno = GET2(slot, 0);
              }
            else if ((recno =                /* Forward back reference */
-                     find_parens(ptr, cd->bracount, name, namelen,
+                     find_parens(cd, name, namelen,
                        (options & PCRE_EXTENDED) != 0)) <= 0)
              {
              *errorcodeptr = ERR15;
-Line 4334 
 for (;; ptr++)
+Line 4986 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
-         case 'R':                 /* Recursion */
+         case CHAR_R:              /* Recursion */
          ptr++;                    /* Same as (?0)      */
          /* Fall through */
          /* ------------------------------------------------------------ */
-         case '-': case '+':
+         case CHAR_MINUS: case CHAR_PLUS:  /* Recursion or subroutine */
-         case '0': case '1': case '2': case '3': case '4':   /* Recursion or */
+         case CHAR_0: case CHAR_1: case CHAR_2: case CHAR_3: case CHAR_4:
-         case '5': case '6': case '7': case '8': case '9':   /* subroutine */
+         case CHAR_5: case CHAR_6: case CHAR_7: case CHAR_8: case CHAR_9:
            {
            const uschar *called;
+           terminator = CHAR_RIGHT_PARENTHESIS;
+           /* Come here from the \g<...> and \g'...' code (Oniguruma
+           compatibility). However, the syntax has been checked to ensure that
+           the ... are a (signed) number, so that neither ERR63 nor ERR29 will
+           be called on this path, nor with the jump to OTHER_CHAR_AFTER_QUERY
+           ever be taken. */
-           if ((refsign = *ptr) == '+') ptr++;
+           HANDLE_NUMERICAL_RECURSION:
-           else if (refsign == '-')
+           if ((refsign = *ptr) == CHAR_PLUS)
+             {
+             ptr++;
+             if ((digitab[*ptr] & ctype_digit) == 0)
+               {
+               *errorcodeptr = ERR63;
+               goto FAILED;
+               }
+             }
+           else if (refsign == CHAR_MINUS)
              {
              if ((digitab[ptr[1]] & ctype_digit) == 0)
                goto OTHER_CHAR_AFTER_QUERY;
-Line 4356 
 for (;; ptr++)
+Line 5025 
 for (;; ptr++)
            recno = 0;
            while((digitab[*ptr] & ctype_digit) != 0)
-             recno = recno * 10 + *ptr++ - '0';
+             recno = recno * 10 + *ptr++ - CHAR_0;
-           if (*ptr != ')')
+           if (*ptr != terminator)
              {
              *errorcodeptr = ERR29;
              goto FAILED;
              }
-           if (refsign == '-')
+           if (refsign == CHAR_MINUS)
              {
              if (recno == 0)
                {
-Line 4378 
 for (;; ptr++)
+Line 5047 
 for (;; ptr++)
                goto FAILED;
                }
              }
-           else if (refsign == '+')
+           else if (refsign == CHAR_PLUS)
              {
              if (recno == 0)
                {
-Line 4405 
 for (;; ptr++)
+Line 5074 
 for (;; ptr++)
            if (lengthptr == NULL)
              {
              *code = OP_END;
-             if (recno != 0) called = find_bracket(cd->start_code, utf8, recno);
+             if (recno != 0)
+               called = _pcre_find_bracket(cd->start_code, utf8, recno);
              /* Forward reference */
              if (called == NULL)
                {
-               if (find_parens(ptr, cd->bracount, NULL, recno,
+               if (find_parens(cd, NULL, recno,
-                    (options & PCRE_EXTENDED) != 0) < 0)
+                     (options & PCRE_EXTENDED) != 0) < 0)
                  {
                  *errorcodeptr = ERR15;
                  goto FAILED;
-Line 4464 
 for (;; ptr++)
+Line 5134 
 for (;; ptr++)
          set = unset = 0;
          optset = &set;
-         while (*ptr != ')' && *ptr != ':')
+         while (*ptr != CHAR_RIGHT_PARENTHESIS && *ptr != CHAR_COLON)
            {
            switch (*ptr++)
              {
-             case '-': optset = &unset; break;
+             case CHAR_MINUS: optset = &unset; break;
-             case 'J':    /* Record that it changed in the external options */
+             case CHAR_J:    /* Record that it changed in the external options */
              *optset |= PCRE_DUPNAMES;
-             cd->external_options |= PCRE_JCHANGED;
+             cd->external_flags |= PCRE_JCHANGED;
              break;
-             case 'i': *optset |= PCRE_CASELESS; break;
+             case CHAR_i: *optset |= PCRE_CASELESS; break;
-             case 'm': *optset |= PCRE_MULTILINE; break;
+             case CHAR_m: *optset |= PCRE_MULTILINE; break;
-             case 's': *optset |= PCRE_DOTALL; break;
+             case CHAR_s: *optset |= PCRE_DOTALL; break;
-             case 'x': *optset |= PCRE_EXTENDED; break;
+             case CHAR_x: *optset |= PCRE_EXTENDED; break;
-             case 'U': *optset |= PCRE_UNGREEDY; break;
+             case CHAR_U: *optset |= PCRE_UNGREEDY; break;
-             case 'X': *optset |= PCRE_EXTRA; break;
+             case CHAR_X: *optset |= PCRE_EXTRA; break;
              default:  *errorcodeptr = ERR12;
                        ptr--;    /* Correct the offset */
-Line 4511 
 for (;; ptr++)
+Line 5181 
 for (;; ptr++)
          both phases.
          If we are not at the pattern start, compile code to change the ims
-         options if this setting actually changes any of them. We also pass the
+         options if this setting actually changes any of them, and reset the
-         new setting back so that it can be put at the start of any following
+         greedy defaults and the case value for firstbyte and reqbyte. */
-         branches, and when this group ends (if we are in a group), a resetting
-         item can be compiled. */
-         if (*ptr == ')')
+         if (*ptr == CHAR_RIGHT_PARENTHESIS)
            {
            if (code == cd->start_code + 1 + LINK_SIZE &&
                 (lengthptr == NULL || *lengthptr == 2 + 2*LINK_SIZE))
              {
              cd->external_options = newoptions;
-             options = newoptions;
              }
           else
              {
-Line 4531 
 for (;; ptr++)
+Line 5198 
 for (;; ptr++)
                *code++ = OP_OPT;
                *code++ = newoptions & PCRE_IMS;
                }
-             /* Change options at this level, and pass them back for use
-             in subsequent branches. Reset the greedy defaults and the case
-             value for firstbyte and reqbyte. */
-             *optionsptr = options = newoptions;
              greedy_default = ((newoptions & PCRE_UNGREEDY) != 0);
              greedy_non_default = greedy_default ^ 1;
-             req_caseopt = ((options & PCRE_CASELESS) != 0)? REQ_CASELESS : 0;
+             req_caseopt = ((newoptions & PCRE_CASELESS) != 0)? REQ_CASELESS : 0;
              }
+           /* Change options at this level, and pass them back for use
+           in subsequent branches. When not at the start of the pattern, this
+           information is also necessary so that a resetting item can be
+           compiled at the end of a group (if we are in a group). */
+           *optionsptr = options = newoptions;
            previous = NULL;       /* This item can't be repeated */
            continue;              /* It is complete */
            }
-Line 4657 
 for (;; ptr++)
+Line 5324 
 for (;; ptr++)
      /* Error if hit end of pattern */
-     if (*ptr != ')')
+     if (*ptr != CHAR_RIGHT_PARENTHESIS)
        {
        *errorcodeptr = ERR14;
        goto FAILED;
        }
-     /* In the pre-compile phase, update the length by the length of the nested
+     /* In the pre-compile phase, update the length by the length of the group,
-     group, less the brackets at either end. Then reduce the compiled code to
+     less the brackets at either end. Then reduce the compiled code to just a
-     just the brackets so that it doesn't use much memory if it is duplicated by
+     set of non-capturing brackets so that it doesn't use much memory if it is
-     a quantifier. */
+     duplicated by a quantifier.*/
      if (lengthptr != NULL)
        {
-Line 4676 
 for (;; ptr++)
+Line 5343 
 for (;; ptr++)
          goto FAILED;
          }
        *lengthptr += length_prevgroup - 2 - 2*LINK_SIZE;
-       code++;
+       *code++ = OP_BRA;
        PUTINC(code, 0, 1 + LINK_SIZE);
        *code++ = OP_KET;
        PUTINC(code, 0, 1 + LINK_SIZE);
+       break;    /* No need to waste time with special character handling */
        }
      /* Otherwise update the main code pointer to the end of the group. */
-     else code = tempcode;
+     code = tempcode;
      /* For a DEFINE group, required and first character settings are not
      relevant. */
-Line 4754 
 for (;; ptr++)
+Line 5422 
 for (;; ptr++)
      We can test for values between ESC_b and ESC_Z for the latter; this may
      have to change if any new ones are ever created. */
-     case '\\':
+     case CHAR_BACKSLASH:
      tempptr = ptr;
      c = check_escape(&ptr, errorcodeptr, cd->bracount, options, FALSE);
      if (*errorcodeptr != 0) goto FAILED;
-Line 4763 
 for (;; ptr++)
+Line 5431 
 for (;; ptr++)
        {
        if (-c == ESC_Q)            /* Handle start of quoted string */
          {
-         if (ptr[1] == '\\' && ptr[2] == 'E') ptr += 2; /* avoid empty string */
+         if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
-           else inescq = TRUE;
+           ptr += 2;               /* avoid empty string */
+             else inescq = TRUE;
          continue;
          }
-Line 4781 
 for (;; ptr++)
+Line 5450 
 for (;; ptr++)
        zerofirstbyte = firstbyte;
        zeroreqbyte = reqbyte;
+       /* \g<name> or \g'name' is a subroutine call by name and \g<n> or \g'n'
+       is a subroutine call by number (Oniguruma syntax). In fact, the value
+       -ESC_g is returned only for these cases. So we don't need to check for <
+       or ' if the value is -ESC_g. For the Perl syntax \g{n} the value is
+       -ESC_REF+n, and for the Perl syntax \g{name} the result is -ESC_k (as
+       that is a synonym for a named back reference). */
+       if (-c == ESC_g)
+         {
+         const uschar *p;
+         save_hwm = cd->hwm;   /* Normally this is set when '(' is read */
+         terminator = (*(++ptr) == CHAR_LESS_THAN_SIGN)?
+           CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE;
+         /* These two statements stop the compiler for warning about possibly
+         unset variables caused by the jump to HANDLE_NUMERICAL_RECURSION. In
+         fact, because we actually check for a number below, the paths that
+         would actually be in error are never taken. */
+         skipbytes = 0;
+         reset_bracount = FALSE;
+         /* Test for a name */
+         if (ptr[1] != CHAR_PLUS && ptr[1] != CHAR_MINUS)
+           {
+           BOOL isnumber = TRUE;
+           for (p = ptr + 1; *p != 0 && *p != terminator; p++)
+             {
+             if ((cd->ctypes[*p] & ctype_digit) == 0) isnumber = FALSE;
+             if ((cd->ctypes[*p] & ctype_word) == 0) break;
+             }
+           if (*p != terminator)
+             {
+             *errorcodeptr = ERR57;
+             break;
+             }
+           if (isnumber)
+             {
+             ptr++;
+             goto HANDLE_NUMERICAL_RECURSION;
+             }
+           is_recurse = TRUE;
+           goto NAMED_REF_OR_RECURSE;
+           }
+         /* Test a signed number in angle brackets or quotes. */
+         p = ptr + 2;
+         while ((digitab[*p] & ctype_digit) != 0) p++;
+         if (*p != terminator)
+           {
+           *errorcodeptr = ERR57;
+           break;
+           }
+         ptr++;
+         goto HANDLE_NUMERICAL_RECURSION;
+         }
        /* \k<name> or \k'name' is a back reference by name (Perl syntax).
        We also support \k{name} (.NET syntax) */
-       if (-c == ESC_k && (ptr[1] == '<' || ptr[1] == '\'' || ptr[1] == '{'))
+       if (-c == ESC_k && (ptr[1] == CHAR_LESS_THAN_SIGN ||
+           ptr[1] == CHAR_APOSTROPHE || ptr[1] == CHAR_LEFT_CURLY_BRACKET))
          {
          is_recurse = FALSE;
-         terminator = (*(++ptr) == '<')? '>' : (*ptr == '\'')? '\'' : '}';
+         terminator = (*(++ptr) == CHAR_LESS_THAN_SIGN)?
+           CHAR_GREATER_THAN_SIGN : (*ptr == CHAR_APOSTROPHE)?
+           CHAR_APOSTROPHE : CHAR_RIGHT_CURLY_BRACKET;
          goto NAMED_REF_OR_RECURSE;
          }
-Line 4888 
 for (;; ptr++)
+Line 5619 
 for (;; ptr++)
      *code++ = ((options & PCRE_CASELESS) != 0)? OP_CHARNC : OP_CHAR;
      for (c = 0; c < mclength; c++) *code++ = mcbuffer[c];
+     /* Remember if \r or \n were seen */
+     if (mcbuffer[0] == CHAR_CR || mcbuffer[0] == CHAR_NL)
+       cd->external_flags |= PCRE_HASCRORLF;
      /* Set the first and required bytes appropriately. If no previous first
      byte, set it from this character, but revert to none on a zero repeat.
      Otherwise, leave the firstbyte value alone, and don't change it on a zero
-Line 4983 
 uschar *code = *codeptr;
+Line 5719 
 uschar *code = *codeptr;
  uschar *last_branch = code;
  uschar *start_bracket = code;
  uschar *reverse_count = NULL;
+ open_capitem capitem;
+ int capnumber = 0;
  int firstbyte, reqbyte;
  int branchfirstbyte, branchreqbyte;
  int length;
-Line 5009 
 the code that abstracts option settings
+Line 5747 
 the code that abstracts option settings
  them global. It tests the value of length for (2 + 2*LINK_SIZE) in the
  pre-compile phase to find out whether anything has yet been compiled or not. */
+ /* If this is a capturing subpattern, add to the chain of open capturing items
+ so that we can detect them if (*ACCEPT) is encountered. */
+ if (*code == OP_CBRA)
+   {
+   capnumber = GET2(code, 1 + LINK_SIZE);
+   capitem.number = capnumber;
+   capitem.next = cd->open_caps;
+   cd->open_caps = &capitem;
+   }
  /* Offset is set zero to mark that this bracket is still open */
  PUT(code, 1, 0);
-Line 5103 
 for (;;)
+Line 5852 
 for (;;)
      /* If lookbehind, check that this branch matches a fixed-length string, and
      put the length into the OP_REVERSE item. Temporarily mark the end of the
-     branch with OP_END. */
+     branch with OP_END. If the branch contains OP_RECURSE, the result is -3
+     because there may be forward references that we can't check here. Set a
+     flag to cause another lookbehind check at the end. Why not do it all at the
+     end? Because common, erroneous checks are picked up here and the offset of
+     the problem can be shown. */
      if (lookbehind)
        {
        int fixed_length;
        *code = OP_END;
-       fixed_length = find_fixedlength(last_branch, options);
+       fixed_length = find_fixedlength(last_branch, options, FALSE, cd);
        DPRINTF(("fixed length = %d\n", fixed_length));
-       if (fixed_length < 0)
+       if (fixed_length == -3)
+         {
+         cd->check_lookbehind = TRUE;
+         }
+       else if (fixed_length < 0)
          {
          *errorcodeptr = (fixed_length == -2)? ERR36 : ERR25;
          *ptrptr = ptr;
          return FALSE;
          }
-       PUT(reverse_count, 0, fixed_length);
+       else { PUT(reverse_count, 0, fixed_length); }
        }
      }
-Line 5130 
 for (;;)
+Line 5887 
 for (;;)
    compile a resetting op-code following, except at the very end of the pattern.
    Return leaving the pointer at the terminating char. */
-   if (*ptr != '|')
+   if (*ptr != CHAR_VERTICAL_LINE)
      {
      if (lengthptr == NULL)
        {
-Line 5144 
 for (;;)
+Line 5901 
 for (;;)
          }
        while (branch_length > 0);
        }
+     /* If it was a capturing subpattern, remove it from the chain. */
+     if (capnumber > 0) cd->open_caps = cd->open_caps->next;
      /* Fill in the ket */
-Line 5153 
 for (;;)
+Line 5914 
 for (;;)
      /* Resetting option if needed */
-     if ((options & PCRE_IMS) != oldims && *ptr == ')')
+     if ((options & PCRE_IMS) != oldims && *ptr == CHAR_RIGHT_PARENTHESIS)
        {
        *code++ = OP_OPT;
        *code++ = oldims;
-Line 5282 
 do {
+Line 6043 
 do {
       if (!is_anchored(scode, options, bracket_map, backref_map)) return FALSE;
       }
-    /* .* is not anchored unless DOTALL is set and it isn't in brackets that
+    /* .* is not anchored unless DOTALL is set (which generates OP_ALLANY) and
-    are or may be referenced. */
+    it isn't in brackets that are or may be referenced. */
     else if ((op == OP_TYPESTAR || op == OP_TYPEMINSTAR ||
-              op == OP_TYPEPOSSTAR) &&
+              op == OP_TYPEPOSSTAR))
-             (*options & PCRE_DOTALL) != 0)
       {
-      if (scode[1] != OP_ANY || (bracket_map & backref_map) != 0) return FALSE;
+      if (scode[1] != OP_ALLANY || (bracket_map & backref_map) != 0)
+        return FALSE;
       }
     /* Check for explicit anchoring */
-Line 5335 
 do {
+Line 6096 
 do {
       NULL, 0, FALSE);
     register int op = *scode;
+    /* If we are at the start of a conditional assertion group, *both* the
+    conditional assertion *and* what follows the condition must satisfy the test
+    for start of line. Other kinds of condition fail. Note that there may be an
+    auto-callout at the start of a condition. */
+    if (op == OP_COND)
+      {
+      scode += 1 + LINK_SIZE;
+      if (*scode == OP_CALLOUT) scode += _pcre_OP_lengths[OP_CALLOUT];
+      switch (*scode)
+        {
+        case OP_CREF:
+        case OP_RREF:
+        case OP_DEF:
+        return FALSE;
+        default:     /* Assertion */
+        if (!is_startline(scode, bracket_map, backref_map)) return FALSE;
+        do scode += GET(scode, 1); while (*scode == OP_ALT);
+        scode += 1 + LINK_SIZE;
+        break;
+        }
+      scode = first_significant_code(scode, NULL, 0, FALSE);
+      op = *scode;
+      }
     /* Non-capturing brackets */
     if (op == OP_BRA)
-Line 5353 
 do {
+Line 6140 
 do {
     /* Other brackets */
-    else if (op == OP_ASSERT || op == OP_ONCE || op == OP_COND)
+    else if (op == OP_ASSERT || op == OP_ONCE)
-      { if (!is_startline(scode, bracket_map, backref_map)) return FALSE; }
+      {
+      if (!is_startline(scode, bracket_map, backref_map)) return FALSE;
+      }
     /* .* means "start at start or after \n" if it isn't in brackets that
     may be referenced. */
-Line 5471 
 Returns:        pointer to compiled data
+Line 6260 
 Returns:        pointer to compiled data
                  with errorptr and erroroffset set
  */
- PCRE_EXP_DEFN pcre *
+ PCRE_EXP_DEFN pcre * PCRE_CALL_CONVENTION
  pcre_compile(const char *pattern, int options, const char **errorptr,
    int *erroroffset, const unsigned char *tables)
  {
-Line 5479 
 return pcre_compile2(pattern, options, N
+Line 6268 
 return pcre_compile2(pattern, options, N
  }
- PCRE_EXP_DEFN pcre *
+ PCRE_EXP_DEFN pcre * PCRE_CALL_CONVENTION
  pcre_compile2(const char *pattern, int options, int *errorcodeptr,
    const char **errorptr, int *erroroffset, const unsigned char *tables)
  {
-Line 5487 
 real_pcre *re;
+Line 6276 
 real_pcre *re;
  int length = 1;  /* For final END opcode */
  int firstbyte, reqbyte, newline;
  int errorcode = 0;
- #ifdef SUPPORT_UTF8
+ int skipatstart = 0;
- BOOL utf8;
+ BOOL utf8 = (options & PCRE_UTF8) != 0;
- #endif
  size_t size;
  uschar *code;
  const uschar *codestart;
-Line 5505 
 to fill in forward references to subpatt
+Line 6293 
 to fill in forward references to subpatt
  uschar cworkspace[COMPILE_WORK_SIZE];
  /* Set this early so that early errors get offset 0. */
  ptr = (const uschar *)pattern;
-Line 5533 
 if (erroroffset == NULL)
+Line 6320 
 if (erroroffset == NULL)
  *erroroffset = 0;
+ /* Set up pointers to the individual character tables */
+ if (tables == NULL) tables = _pcre_default_tables;
+ cd->lcc = tables + lcc_offset;
+ cd->fcc = tables + fcc_offset;
+ cd->cbits = tables + cbits_offset;
+ cd->ctypes = tables + ctypes_offset;
+ /* Check that all undefined public option bits are zero */
+ if ((options & ~PUBLIC_COMPILE_OPTIONS) != 0)
+   {
+   errorcode = ERR17;
+   goto PCRE_EARLY_ERROR_RETURN;
+   }
+ /* Check for global one-time settings at the start of the pattern, and remember
+ the offset for later. */
+ while (ptr[skipatstart] == CHAR_LEFT_PARENTHESIS &&
+        ptr[skipatstart+1] == CHAR_ASTERISK)
+   {
+   int newnl = 0;
+   int newbsr = 0;
+   if (strncmp((char *)(ptr+skipatstart+2), STRING_UTF8_RIGHTPAR, 5) == 0)
+     { skipatstart += 7; options |= PCRE_UTF8; continue; }
+   if (strncmp((char *)(ptr+skipatstart+2), STRING_CR_RIGHTPAR, 3) == 0)
+     { skipatstart += 5; newnl = PCRE_NEWLINE_CR; }
+   else if (strncmp((char *)(ptr+skipatstart+2), STRING_LF_RIGHTPAR, 3)  == 0)
+     { skipatstart += 5; newnl = PCRE_NEWLINE_LF; }
+   else if (strncmp((char *)(ptr+skipatstart+2), STRING_CRLF_RIGHTPAR, 5)  == 0)
+     { skipatstart += 7; newnl = PCRE_NEWLINE_CR + PCRE_NEWLINE_LF; }
+   else if (strncmp((char *)(ptr+skipatstart+2), STRING_ANY_RIGHTPAR, 4) == 0)
+     { skipatstart += 6; newnl = PCRE_NEWLINE_ANY; }
+   else if (strncmp((char *)(ptr+skipatstart+2), STRING_ANYCRLF_RIGHTPAR, 8) == 0)
+     { skipatstart += 10; newnl = PCRE_NEWLINE_ANYCRLF; }
+   else if (strncmp((char *)(ptr+skipatstart+2), STRING_BSR_ANYCRLF_RIGHTPAR, 12) == 0)
+     { skipatstart += 14; newbsr = PCRE_BSR_ANYCRLF; }
+   else if (strncmp((char *)(ptr+skipatstart+2), STRING_BSR_UNICODE_RIGHTPAR, 12) == 0)
+     { skipatstart += 14; newbsr = PCRE_BSR_UNICODE; }
+   if (newnl != 0)
+     options = (options & ~PCRE_NEWLINE_BITS) | newnl;
+   else if (newbsr != 0)
+     options = (options & ~(PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) | newbsr;
+   else break;
+   }
  /* Can't support UTF8 unless PCRE has been compiled to include the code. */
  #ifdef SUPPORT_UTF8
- utf8 = (options & PCRE_UTF8) != 0;
  if (utf8 && (options & PCRE_NO_UTF8_CHECK) == 0 &&
       (*erroroffset = _pcre_valid_utf8((uschar *)pattern, -1)) >= 0)
    {
-Line 5544 
 if (utf8 && (options & PCRE_NO_UTF8_CHEC
+Line 6381 
 if (utf8 && (options & PCRE_NO_UTF8_CHEC
    goto PCRE_EARLY_ERROR_RETURN2;
    }
  #else
- if ((options & PCRE_UTF8) != 0)
+ if (utf8)
    {
    errorcode = ERR32;
    goto PCRE_EARLY_ERROR_RETURN;
    }
  #endif
- if ((options & ~PUBLIC_OPTIONS) != 0)
+ /* Check validity of \R options. */
+ switch (options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE))
    {
-   errorcode = ERR17;
+   case 0:
-   goto PCRE_EARLY_ERROR_RETURN;
+   case PCRE_BSR_ANYCRLF:
+   case PCRE_BSR_UNICODE:
+   break;
+   default: errorcode = ERR56; goto PCRE_EARLY_ERROR_RETURN;
    }
- /* Set up pointers to the individual character tables */
- if (tables == NULL) tables = _pcre_default_tables;
- cd->lcc = tables + lcc_offset;
- cd->fcc = tables + fcc_offset;
- cd->cbits = tables + cbits_offset;
- cd->ctypes = tables + ctypes_offset;
  /* Handle different types of newline. The three bits give seven cases. The
  current code allows for fixed one- or two-byte sequences, plus "any" and
  "anycrlf". */
- switch (options & (PCRE_NEWLINE_CRLF | PCRE_NEWLINE_ANY))
+ switch (options & PCRE_NEWLINE_BITS)
    {
-   case 0: newline = NEWLINE; break;   /* Compile-time default */
+   case 0: newline = NEWLINE; break;   /* Build-time default */
-   case PCRE_NEWLINE_CR: newline = '\r'; break;
+   case PCRE_NEWLINE_CR: newline = CHAR_CR; break;
-   case PCRE_NEWLINE_LF: newline = '\n'; break;
+   case PCRE_NEWLINE_LF: newline = CHAR_NL; break;
    case PCRE_NEWLINE_CR+
-        PCRE_NEWLINE_LF: newline = ('\r' << 8) | '\n'; break;
+        PCRE_NEWLINE_LF: newline = (CHAR_CR << 8) | CHAR_NL; break;
    case PCRE_NEWLINE_ANY: newline = -1; break;
    case PCRE_NEWLINE_ANYCRLF: newline = -2; break;
    default: errorcode = ERR56; goto PCRE_EARLY_ERROR_RETURN;
-Line 5624 
 to compile parts of the pattern into; th
+Line 6458 
 to compile parts of the pattern into; th
  no longer needed, so hopefully this workspace will never overflow, though there
  is a test for its doing so. */
- cd->bracount = 0;
+ cd->bracount = cd->final_bracount = 0;
  cd->names_found = 0;
  cd->name_entry_size = 0;
  cd->name_table = NULL;
-Line 5634 
 cd->hwm = cworkspace;
+Line 6468 
 cd->hwm = cworkspace;
  cd->start_pattern = (const uschar *)pattern;
  cd->end_pattern = (const uschar *)(pattern + strlen(pattern));
  cd->req_varyopt = 0;
- cd->nopartial = FALSE;
  cd->external_options = options;
+ cd->external_flags = 0;
+ cd->open_caps = NULL;
  /* Now do the pre-compile. On error, errorcode will be set non-zero, so we
  don't need to look at the result of the function here. The initial options have
-Line 5643 
 been put into the cd block so that they
+Line 6478 
 been put into the cd block so that they
  found within the regex right at the beginning. Bringing initial option settings
  outside can help speed up starting point checks. */
+ ptr += skipatstart;
  code = cworkspace;
  *code = OP_BRA;
  (void)compile_regex(cd->external_options, cd->external_options & PCRE_IMS,
-Line 5673 
 if (re == NULL)
+Line 6509 
 if (re == NULL)
    goto PCRE_EARLY_ERROR_RETURN;
    }
- /* Put in the magic number, and save the sizes, initial options, and character
+ /* Put in the magic number, and save the sizes, initial options, internal
- table pointer. NULL is used for the default character tables. The nullpad field
+ flags, and character table pointer. NULL is used for the default character
- is at the end; it's there to help in the case when a regex compiled on a system
+ tables. The nullpad field is at the end; it's there to help in the case when a
- with 4-byte pointers is run on another with 8-byte pointers. */
+ regex compiled on a system with 4-byte pointers is run on another with 8-byte
+ pointers. */
  re->magic_number = MAGIC_NUMBER;
  re->size = size;
  re->options = cd->external_options;
+ re->flags = cd->external_flags;
  re->dummy1 = 0;
  re->first_byte = 0;
  re->req_byte = 0;
-Line 5698 
 field. Reset the bracket count and the n
+Line 6536 
 field. Reset the bracket count and the n
  field; this time it's used for remembering forward references to subpatterns.
  */
+ cd->final_bracount = cd->bracount;  /* Save for checking forward references */
  cd->bracount = 0;
  cd->names_found = 0;
  cd->name_table = (uschar *)re + re->name_table_offset;
-Line 5705 
 codestart = cd->name_table + re->name_en
+Line 6544 
 codestart = cd->name_table + re->name_en
  cd->start_code = codestart;
  cd->hwm = cworkspace;
  cd->req_varyopt = 0;
- cd->nopartial = FALSE;
+ cd->had_accept = FALSE;
+ cd->check_lookbehind = FALSE;
+ cd->open_caps = NULL;
  /* Set up a starting, non-extracting bracket, then compile the expression. On
  error, errorcode will be set non-zero, so we don't need to look at the result
  of the function here. */
- ptr = (const uschar *)pattern;
+ ptr = (const uschar *)pattern + skipatstart;
  code = (uschar *)codestart;
  *code = OP_BRA;
  (void)compile_regex(re->options, re->options & PCRE_IMS, &code, &ptr,
    &errorcode, FALSE, FALSE, 0, &firstbyte, &reqbyte, NULL, cd, NULL);
  re->top_bracket = cd->bracount;
  re->top_backref = cd->top_backref;
+ re->flags = cd->external_flags;
- if (cd->nopartial) re->options |= PCRE_NOPARTIAL;
+ if (cd->had_accept) reqbyte = -1;   /* Must disable after (*ACCEPT) */
  /* If not reached end of pattern on success, there's an excess bracket. */
-Line 5743 
 while (errorcode == 0 && cd->hwm > cwork
+Line 6585 
 while (errorcode == 0 && cd->hwm > cwork
    cd->hwm -= LINK_SIZE;
    offset = GET(cd->hwm, 0);
    recno = GET(codestart, offset);
-   groupptr = find_bracket(codestart, (re->options & PCRE_UTF8) != 0, recno);
+   groupptr = _pcre_find_bracket(codestart, utf8, recno);
    if (groupptr == NULL) errorcode = ERR53;
      else PUT(((uschar *)codestart), offset, groupptr - codestart);
    }
-Line 5753 
 subpattern. */
+Line 6595 
 subpattern. */
  if (errorcode == 0 && re->top_backref > re->top_bracket) errorcode = ERR15;
+ /* If there were any lookbehind assertions that contained OP_RECURSE
+ (recursions or subroutine calls), a flag is set for them to be checked here,
+ because they may contain forward references. Actual recursions can't be fixed
+ length, but subroutine calls can. It is done like this so that those without
+ OP_RECURSE that are not fixed length get a diagnosic with a useful offset. The
+ exceptional ones forgo this. We scan the pattern to check that they are fixed
+ length, and set their lengths. */
+ if (cd->check_lookbehind)
+   {
+   uschar *cc = (uschar *)codestart;
+   /* Loop, searching for OP_REVERSE items, and process those that do not have
+   their length set. (Actually, it will also re-process any that have a length
+   of zero, but that is a pathological case, and it does no harm.) When we find
+   one, we temporarily terminate the branch it is in while we scan it. */
+   for (cc = (uschar *)_pcre_find_bracket(codestart, utf8, -1);
+        cc != NULL;
+        cc = (uschar *)_pcre_find_bracket(cc, utf8, -1))
+     {
+     if (GET(cc, 1) == 0)
+       {
+       int fixed_length;
+       uschar *be = cc - 1 - LINK_SIZE + GET(cc, -LINK_SIZE);
+       int end_op = *be;
+       *be = OP_END;
+       fixed_length = find_fixedlength(cc, re->options, TRUE, cd);
+       *be = end_op;
+       DPRINTF(("fixed length = %d\n", fixed_length));
+       if (fixed_length < 0)
+         {
+         errorcode = (fixed_length == -2)? ERR36 : ERR25;
+         break;
+         }
+       PUT(cc, 1, fixed_length);
+       }
+     cc += 1 + LINK_SIZE;
+     }
+   }
  /* Failed to compile, or error while post-processing */
  if (errorcode != 0)
-Line 5761 
 if (errorcode != 0)
+Line 6644 
 if (errorcode != 0)
    PCRE_EARLY_ERROR_RETURN:
    *erroroffset = ptr - (const uschar *)pattern;
    PCRE_EARLY_ERROR_RETURN2:
-   *errorptr = error_texts[errorcode];
+   *errorptr = find_error_text(errorcode);
    if (errorcodeptr != NULL) *errorcodeptr = errorcode;
    return NULL;
    }
-Line 5790 
 if ((re->options & PCRE_ANCHORED) == 0)
+Line 6673 
 if ((re->options & PCRE_ANCHORED) == 0)
        int ch = firstbyte & 255;
        re->first_byte = ((firstbyte & REQ_CASELESS) != 0 &&
           cd->fcc[ch] == ch)? ch : firstbyte;
-       re->options |= PCRE_FIRSTSET;
+       re->flags |= PCRE_FIRSTSET;
        }
      else if (is_startline(codestart, 0, cd->backref_map))
-       re->options |= PCRE_STARTLINE;
+       re->flags |= PCRE_STARTLINE;
      }
    }
-Line 5807 
 if (reqbyte >= 0 &&
+Line 6690 
 if (reqbyte >= 0 &&
    int ch = reqbyte & 255;
    re->req_byte = ((reqbyte & REQ_CASELESS) != 0 &&
      cd->fcc[ch] == ch)? (reqbyte & ~REQ_CASELESS) : reqbyte;
-   re->options |= PCRE_REQCHSET;
+   re->flags |= PCRE_REQCHSET;
    }
  /* Print out the compiled data if debugging is enabled. This is never the
-Line 5818 
 case when building a production library.
+Line 6701 
 case when building a production library.
  printf("Length = %d top_bracket = %d top_backref = %d\n",
    length, re->top_bracket, re->top_backref);
- if (re->options != 0)
+ printf("Options=%08x\n", re->options);
-   {
-   printf("%s%s%s%s%s%s%s%s%s\n",
-     ((re->options & PCRE_NOPARTIAL) != 0)? "nopartial " : "",
-     ((re->options & PCRE_ANCHORED) != 0)? "anchored " : "",
-     ((re->options & PCRE_CASELESS) != 0)? "caseless " : "",
-     ((re->options & PCRE_EXTENDED) != 0)? "extended " : "",
-     ((re->options & PCRE_MULTILINE) != 0)? "multiline " : "",
-     ((re->options & PCRE_DOTALL) != 0)? "dotall " : "",
-     ((re->options & PCRE_DOLLAR_ENDONLY) != 0)? "endonly " : "",
-     ((re->options & PCRE_EXTRA) != 0)? "extra " : "",
-     ((re->options & PCRE_UNGREEDY) != 0)? "ungreedy " : "");
-   }
- if ((re->options & PCRE_FIRSTSET) != 0)
+ if ((re->flags & PCRE_FIRSTSET) != 0)
    {
    int ch = re->first_byte & 255;
    const char *caseless = ((re->first_byte & REQ_CASELESS) == 0)?
-Line 5841 
 if ((re->options & PCRE_FIRSTSET) != 0)
+Line 6712 
 if ((re->options & PCRE_FIRSTSET) != 0)
      else printf("First char = \\x%02x%s\n", ch, caseless);
    }
- if ((re->options & PCRE_REQCHSET) != 0)
+ if ((re->flags & PCRE_REQCHSET) != 0)
    {
    int ch = re->req_byte & 255;
    const char *caseless = ((re->req_byte & REQ_CASELESS) == 0)?
-Line 5858 
 was compiled can be seen. */
+Line 6729 
 was compiled can be seen. */
  if (code - codestart > length)
    {
    (pcre_free)(re);
-   *errorptr = error_texts[ERR23];
+   *errorptr = find_error_text(ERR23);
    *erroroffset = ptr - (uschar *)pattern;
    if (errorcodeptr != NULL) *errorcodeptr = ERR23;
    return NULL;

 Legend:



Removed from v.208
 


changed lines


 
Added in v.455
 Legend:



Removed from v.208
 


changed lines


 
Added in v.455
-Removed from v.208
+Added in v.455

	ViewVC Help
Powered by ViewVC 1.1.5