/[pcre]/code/trunk/pcre_dfa_exec.c
ViewVC logotype

Diff of /code/trunk/pcre_dfa_exec.c

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 428 by ph10, Mon Aug 31 17:10:26 2009 UTC revision 535 by ph10, Thu Jun 3 19:18:24 2010 UTC
# Line 7  and semantics are as close as possible t Line 7  and semantics are as close as possible t
7  below for why this module is different).  below for why this module is different).
8    
9                         Written by Philip Hazel                         Written by Philip Hazel
10             Copyright (c) 1997-2009 University of Cambridge             Copyright (c) 1997-2010 University of Cambridge
11    
12  -----------------------------------------------------------------------------  -----------------------------------------------------------------------------
13  Redistribution and use in source and binary forms, with or without  Redistribution and use in source and binary forms, with or without
# Line 45  FSM). This is NOT Perl- compatible, but Line 45  FSM). This is NOT Perl- compatible, but
45  applications. */  applications. */
46    
47    
48    /* NOTE ABOUT PERFORMANCE: A user of this function sent some code that improved
49    the performance of his patterns greatly. I could not use it as it stood, as it
50    was not thread safe, and made assumptions about pattern sizes. Also, it caused
51    test 7 to loop, and test 9 to crash with a segfault.
52    
53    The issue is the check for duplicate states, which is done by a simple linear
54    search up the state list. (Grep for "duplicate" below to find the code.) For
55    many patterns, there will never be many states active at one time, so a simple
56    linear search is fine. In patterns that have many active states, it might be a
57    bottleneck. The suggested code used an indexing scheme to remember which states
58    had previously been used for each character, and avoided the linear search when
59    it knew there was no chance of a duplicate. This was implemented when adding
60    states to the state lists.
61    
62    I wrote some thread-safe, not-limited code to try something similar at the time
63    of checking for duplicates (instead of when adding states), using index vectors
64    on the stack. It did give a 13% improvement with one specially constructed
65    pattern for certain subject strings, but on other strings and on many of the
66    simpler patterns in the test suite it did worse. The major problem, I think,
67    was the extra time to initialize the index. This had to be done for each call
68    of internal_dfa_exec(). (The supplied patch used a static vector, initialized
69    only once - I suspect this was the cause of the problems with the tests.)
70    
71    Overall, I concluded that the gains in some cases did not outweigh the losses
72    in others, so I abandoned this code. */
73    
74    
75    
76  #ifdef HAVE_CONFIG_H  #ifdef HAVE_CONFIG_H
77  #include "config.h"  #include "config.h"
78  #endif  #endif
# Line 78  never stored, so we push them well clear Line 106  never stored, so we push them well clear
106    
107    
108  /* This table identifies those opcodes that are followed immediately by a  /* This table identifies those opcodes that are followed immediately by a
109  character that is to be tested in some way. This makes is possible to  character that is to be tested in some way. This makes it possible to
110  centralize the loading of these characters. In the case of Type * etc, the  centralize the loading of these characters. In the case of Type * etc, the
111  "character" is the opcode for \D, \d, \S, \s, \W, or \w, which will always be a  "character" is the opcode for \D, \d, \S, \s, \W, or \w, which will always be a
112  small value. ***NOTE*** If the start of this table is modified, the two tables  small value. Non-zero values in the table are the offsets from the opcode where
113  that follow must also be modified. */  the character is to be found. ***NOTE*** If the start of this table is
114    modified, the three tables that follow must also be modified. */
115    
116  static const uschar coptable[] = {  static const uschar coptable[] = {
117    0,                             /* End                                    */    0,                             /* End                                    */
118    0, 0, 0, 0, 0,                 /* \A, \G, \K, \B, \b                     */    0, 0, 0, 0, 0,                 /* \A, \G, \K, \B, \b                     */
119    0, 0, 0, 0, 0, 0,              /* \D, \d, \S, \s, \W, \w                 */    0, 0, 0, 0, 0, 0,              /* \D, \d, \S, \s, \W, \w                 */
120    0, 0, 0,                       /* Any, AllAny, Anybyte                   */    0, 0, 0,                       /* Any, AllAny, Anybyte                   */
121    0, 0, 0,                       /* NOTPROP, PROP, EXTUNI                  */    0, 0,                          /* \P, \p                                 */
122    0, 0, 0, 0, 0,                 /* \R, \H, \h, \V, \v                     */    0, 0, 0, 0, 0,                 /* \R, \H, \h, \V, \v                     */
123      0,                             /* \X                                     */
124    0, 0, 0, 0, 0,                 /* \Z, \z, Opt, ^, $                      */    0, 0, 0, 0, 0,                 /* \Z, \z, Opt, ^, $                      */
125    1,                             /* Char                                   */    1,                             /* Char                                   */
126    1,                             /* Charnc                                 */    1,                             /* Charnc                                 */
# Line 127  static const uschar coptable[] = { Line 157  static const uschar coptable[] = {
157    0,                             /* Reverse                                */    0,                             /* Reverse                                */
158    0, 0, 0, 0,                    /* ONCE, BRA, CBRA, COND                  */    0, 0, 0, 0,                    /* ONCE, BRA, CBRA, COND                  */
159    0, 0, 0,                       /* SBRA, SCBRA, SCOND                     */    0, 0, 0,                       /* SBRA, SCBRA, SCOND                     */
160    0,                             /* CREF                                   */    0, 0,                          /* CREF, NCREF                            */
161    0,                             /* RREF                                   */    0, 0,                          /* RREF, NRREF                            */
162      0,                             /* DEF                                    */
163      0, 0,                          /* BRAZERO, BRAMINZERO                    */
164      0, 0, 0,                       /* MARK, PRUNE, PRUNE_ARG,                */
165      0, 0, 0, 0,                    /* SKIP, SKIP_ARG, THEN, THEN_ARG,        */
166      0, 0, 0, 0, 0                  /* COMMIT, FAIL, ACCEPT, CLOSE, SKIPZERO  */
167    };
168    
169    /* This table identifies those opcodes that inspect a character. It is used to
170    remember the fact that a character could have been inspected when the end of
171    the subject is reached. ***NOTE*** If the start of this table is modified, the
172    two tables that follow must also be modified. */
173    
174    static const uschar poptable[] = {
175      0,                             /* End                                    */
176      0, 0, 0, 1, 1,                 /* \A, \G, \K, \B, \b                     */
177      1, 1, 1, 1, 1, 1,              /* \D, \d, \S, \s, \W, \w                 */
178      1, 1, 1,                       /* Any, AllAny, Anybyte                   */
179      1, 1,                          /* \P, \p                                 */
180      1, 1, 1, 1, 1,                 /* \R, \H, \h, \V, \v                     */
181      1,                             /* \X                                     */
182      0, 0, 0, 0, 0,                 /* \Z, \z, Opt, ^, $                      */
183      1,                             /* Char                                   */
184      1,                             /* Charnc                                 */
185      1,                             /* not                                    */
186      /* Positive single-char repeats                                          */
187      1, 1, 1, 1, 1, 1,              /* *, *?, +, +?, ?, ??                    */
188      1, 1, 1,                       /* upto, minupto, exact                   */
189      1, 1, 1, 1,                    /* *+, ++, ?+, upto+                      */
190      /* Negative single-char repeats - only for chars < 256                   */
191      1, 1, 1, 1, 1, 1,              /* NOT *, *?, +, +?, ?, ??                */
192      1, 1, 1,                       /* NOT upto, minupto, exact               */
193      1, 1, 1, 1,                    /* NOT *+, ++, ?+, upto+                  */
194      /* Positive type repeats                                                 */
195      1, 1, 1, 1, 1, 1,              /* Type *, *?, +, +?, ?, ??               */
196      1, 1, 1,                       /* Type upto, minupto, exact              */
197      1, 1, 1, 1,                    /* Type *+, ++, ?+, upto+                 */
198      /* Character class & ref repeats                                         */
199      1, 1, 1, 1, 1, 1,              /* *, *?, +, +?, ?, ??                    */
200      1, 1,                          /* CRRANGE, CRMINRANGE                    */
201      1,                             /* CLASS                                  */
202      1,                             /* NCLASS                                 */
203      1,                             /* XCLASS - variable length               */
204      0,                             /* REF                                    */
205      0,                             /* RECURSE                                */
206      0,                             /* CALLOUT                                */
207      0,                             /* Alt                                    */
208      0,                             /* Ket                                    */
209      0,                             /* KetRmax                                */
210      0,                             /* KetRmin                                */
211      0,                             /* Assert                                 */
212      0,                             /* Assert not                             */
213      0,                             /* Assert behind                          */
214      0,                             /* Assert behind not                      */
215      0,                             /* Reverse                                */
216      0, 0, 0, 0,                    /* ONCE, BRA, CBRA, COND                  */
217      0, 0, 0,                       /* SBRA, SCBRA, SCOND                     */
218      0, 0,                          /* CREF, NCREF                            */
219      0, 0,                          /* RREF, NRREF                            */
220    0,                             /* DEF                                    */    0,                             /* DEF                                    */
221    0, 0,                          /* BRAZERO, BRAMINZERO                    */    0, 0,                          /* BRAZERO, BRAMINZERO                    */
222    0, 0, 0, 0,                    /* PRUNE, SKIP, THEN, COMMIT              */    0, 0, 0,                       /* MARK, PRUNE, PRUNE_ARG,                */
223    0, 0, 0                        /* FAIL, ACCEPT, SKIPZERO                 */    0, 0, 0, 0,                    /* SKIP, SKIP_ARG, THEN, THEN_ARG,        */
224      0, 0, 0, 0, 0                  /* COMMIT, FAIL, ACCEPT, CLOSE, SKIPZERO  */
225  };  };
226    
227  /* These 2 tables allow for compact code for testing for \D, \d, \S, \s, \W,  /* These 2 tables allow for compact code for testing for \D, \d, \S, \s, \W,
# Line 170  typedef struct stateblock { Line 259  typedef struct stateblock {
259  #define INTS_PER_STATEBLOCK  (sizeof(stateblock)/sizeof(int))  #define INTS_PER_STATEBLOCK  (sizeof(stateblock)/sizeof(int))
260    
261    
262  #ifdef DEBUG  #ifdef PCRE_DEBUG
263  /*************************************************  /*************************************************
264  *             Print character string             *  *             Print character string             *
265  *************************************************/  *************************************************/
# Line 386  if (*first_op == OP_REVERSE) Line 475  if (*first_op == OP_REVERSE)
475    
476      {      {
477      gone_back = (current_subject - max_back < start_subject)?      gone_back = (current_subject - max_back < start_subject)?
478        current_subject - start_subject : max_back;        (int)(current_subject - start_subject) : max_back;
479      current_subject -= gone_back;      current_subject -= gone_back;
480      }      }
481    
482      /* Save the earliest consulted character */
483    
484      if (current_subject < md->start_used_ptr)
485        md->start_used_ptr = current_subject;
486    
487    /* Now we can process the individual branches. */    /* Now we can process the individual branches. */
488    
489    end_code = this_start_code;    end_code = this_start_code;
# Line 398  if (*first_op == OP_REVERSE) Line 492  if (*first_op == OP_REVERSE)
492      int back = GET(end_code, 2+LINK_SIZE);      int back = GET(end_code, 2+LINK_SIZE);
493      if (back <= gone_back)      if (back <= gone_back)
494        {        {
495        int bstate = end_code - start_code + 2 + 2*LINK_SIZE;        int bstate = (int)(end_code - start_code + 2 + 2*LINK_SIZE);
496        ADD_NEW_DATA(-bstate, 0, gone_back - back);        ADD_NEW_DATA(-bstate, 0, gone_back - back);
497        }        }
498      end_code += GET(end_code, 1);      end_code += GET(end_code, 1);
# Line 434  else Line 528  else
528        ((*this_start_code == OP_CBRA || *this_start_code == OP_SCBRA)? 2:0);        ((*this_start_code == OP_CBRA || *this_start_code == OP_SCBRA)? 2:0);
529      do      do
530        {        {
531        ADD_NEW(end_code - start_code + length, 0);        ADD_NEW((int)(end_code - start_code + length), 0);
532        end_code += GET(end_code, 1);        end_code += GET(end_code, 1);
533        length = 1 + LINK_SIZE;        length = 1 + LINK_SIZE;
534        }        }
# Line 455  for (;;) Line 549  for (;;)
549    int clen, dlen;    int clen, dlen;
550    unsigned int c, d;    unsigned int c, d;
551    int forced_fail = 0;    int forced_fail = 0;
552    int reached_end = 0;    BOOL could_continue = FALSE;
553    
554    /* Make the new state list into the active state list and empty the    /* Make the new state list into the active state list and empty the
555    new state list. */    new state list. */
# Line 469  for (;;) Line 563  for (;;)
563    workspace[0] ^= 1;              /* Remember for the restarting feature */    workspace[0] ^= 1;              /* Remember for the restarting feature */
564    workspace[1] = active_count;    workspace[1] = active_count;
565    
566  #ifdef DEBUG  #ifdef PCRE_DEBUG
567    printf("%.*sNext character: rest of subject = \"", rlevel*2-2, SP);    printf("%.*sNext character: rest of subject = \"", rlevel*2-2, SP);
568    pchars((uschar *)ptr, strlen((char *)ptr), stdout);    pchars((uschar *)ptr, strlen((char *)ptr), stdout);
569    printf("\"\n");    printf("\"\n");
# Line 515  for (;;) Line 609  for (;;)
609      int state_offset = current_state->offset;      int state_offset = current_state->offset;
610      int count, codevalue, rrc;      int count, codevalue, rrc;
611    
612  #ifdef DEBUG  #ifdef PCRE_DEBUG
613      printf ("%.*sProcessing state %d c=", rlevel*2-2, SP, state_offset);      printf ("%.*sProcessing state %d c=", rlevel*2-2, SP, state_offset);
614      if (clen == 0) printf("EOL\n");      if (clen == 0) printf("EOL\n");
615        else if (c > 32 && c < 127) printf("'%c'\n", c);        else if (c > 32 && c < 127) printf("'%c'\n", c);
# Line 545  for (;;) Line 639  for (;;)
639          }          }
640        }        }
641    
642      /* Check for a duplicate state with the same count, and skip if found. */      /* Check for a duplicate state with the same count, and skip if found.
643        See the note at the head of this module about the possibility of improving
644        performance here. */
645    
646      for (j = 0; j < i; j++)      for (j = 0; j < i; j++)
647        {        {
# Line 562  for (;;) Line 658  for (;;)
658      code = start_code + state_offset;      code = start_code + state_offset;
659      codevalue = *code;      codevalue = *code;
660    
661        /* If this opcode inspects a character, but we are at the end of the
662        subject, remember the fact for use when testing for a partial match. */
663    
664        if (clen == 0 && poptable[codevalue] != 0)
665          could_continue = TRUE;
666    
667      /* If this opcode is followed by an inline character, load it. It is      /* If this opcode is followed by an inline character, load it. It is
668      tempting to test for the presence of a subject character here, but that      tempting to test for the presence of a subject character here, but that
669      is wrong, because sometimes zero repetitions of the subject are      is wrong, because sometimes zero repetitions of the subject are
# Line 608  for (;;) Line 710  for (;;)
710    
711      switch (codevalue)      switch (codevalue)
712        {        {
713    /* ========================================================================== */
714          /* These cases are never obeyed. This is a fudge that causes a compile-
715          time error if the vectors coptable or poptable, which are indexed by
716          opcode, are not the correct length. It seems to be the only way to do
717          such a check at compile time, as the sizeof() operator does not work
718          in the C preprocessor. */
719    
720          case OP_TABLE_LENGTH:
721          case OP_TABLE_LENGTH +
722            ((sizeof(coptable) == OP_TABLE_LENGTH) &&
723             (sizeof(poptable) == OP_TABLE_LENGTH)):
724          break;
725    
726  /* ========================================================================== */  /* ========================================================================== */
727        /* Reached a closing bracket. If not at the end of the pattern, carry        /* Reached a closing bracket. If not at the end of the pattern, carry
728        on with the next opcode. Otherwise, unless we have an empty string and        on with the next opcode. Otherwise, unless we have an empty string and
729        PCRE_NOTEMPTY is set, save the match data, shifting up all previous        PCRE_NOTEMPTY is set, or PCRE_NOTEMPTY_ATSTART is set and we are at the
730          start of the subject, save the match data, shifting up all previous
731        matches so we always have the longest first. */        matches so we always have the longest first. */
732    
733        case OP_KET:        case OP_KET:
# Line 626  for (;;) Line 741  for (;;)
741            ADD_ACTIVE(state_offset - GET(code, 1), 0);            ADD_ACTIVE(state_offset - GET(code, 1), 0);
742            }            }
743          }          }
744        else        else
745          {          {
746          reached_end++;    /* Count branches that reach the end */          if (ptr > current_subject ||
747          if (ptr > current_subject || (md->moptions & PCRE_NOTEMPTY) == 0)              ((md->moptions & PCRE_NOTEMPTY) == 0 &&
748                  ((md->moptions & PCRE_NOTEMPTY_ATSTART) == 0 ||
749                    current_subject > start_subject + md->start_offset)))
750            {            {
751            if (match_count < 0) match_count = (offsetcount >= 2)? 1 : 0;            if (match_count < 0) match_count = (offsetcount >= 2)? 1 : 0;
752              else if (match_count > 0 && ++match_count * 2 >= offsetcount)              else if (match_count > 0 && ++match_count * 2 >= offsetcount)
# Line 638  for (;;) Line 755  for (;;)
755            if (count > 0) memmove(offsets + 2, offsets, count * sizeof(int));            if (count > 0) memmove(offsets + 2, offsets, count * sizeof(int));
756            if (offsetcount >= 2)            if (offsetcount >= 2)
757              {              {
758              offsets[0] = current_subject - start_subject;              offsets[0] = (int)(current_subject - start_subject);
759              offsets[1] = ptr - start_subject;              offsets[1] = (int)(ptr - start_subject);
760              DPRINTF(("%.*sSet matched string = \"%.*s\"\n", rlevel*2-2, SP,              DPRINTF(("%.*sSet matched string = \"%.*s\"\n", rlevel*2-2, SP,
761                offsets[1] - offsets[0], current_subject));                offsets[1] - offsets[0], current_subject));
762              }              }
# Line 650  for (;;) Line 767  for (;;)
767                match_count, rlevel*2-2, SP));                match_count, rlevel*2-2, SP));
768              return match_count;              return match_count;
769              }              }
770            }            }
771          }          }
772        break;        break;
773    
# Line 661  for (;;) Line 778  for (;;)
778        /*-----------------------------------------------------------------*/        /*-----------------------------------------------------------------*/
779        case OP_ALT:        case OP_ALT:
780        do { code += GET(code, 1); } while (*code == OP_ALT);        do { code += GET(code, 1); } while (*code == OP_ALT);
781        ADD_ACTIVE(code - start_code, 0);        ADD_ACTIVE((int)(code - start_code), 0);
782        break;        break;
783    
784        /*-----------------------------------------------------------------*/        /*-----------------------------------------------------------------*/
# Line 669  for (;;) Line 786  for (;;)
786        case OP_SBRA:        case OP_SBRA:
787        do        do
788          {          {
789          ADD_ACTIVE(code - start_code + 1 + LINK_SIZE, 0);          ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0);
790          code += GET(code, 1);          code += GET(code, 1);
791          }          }
792        while (*code == OP_ALT);        while (*code == OP_ALT);
# Line 678  for (;;) Line 795  for (;;)
795        /*-----------------------------------------------------------------*/        /*-----------------------------------------------------------------*/
796        case OP_CBRA:        case OP_CBRA:
797        case OP_SCBRA:        case OP_SCBRA:
798        ADD_ACTIVE(code - start_code + 3 + LINK_SIZE,  0);        ADD_ACTIVE((int)(code - start_code + 3 + LINK_SIZE),  0);
799        code += GET(code, 1);        code += GET(code, 1);
800        while (*code == OP_ALT)        while (*code == OP_ALT)
801          {          {
802          ADD_ACTIVE(code - start_code + 1 + LINK_SIZE,  0);          ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE),  0);
803          code += GET(code, 1);          code += GET(code, 1);
804          }          }
805        break;        break;
# Line 693  for (;;) Line 810  for (;;)
810        ADD_ACTIVE(state_offset + 1, 0);        ADD_ACTIVE(state_offset + 1, 0);
811        code += 1 + GET(code, 2);        code += 1 + GET(code, 2);
812        while (*code == OP_ALT) code += GET(code, 1);        while (*code == OP_ALT) code += GET(code, 1);
813        ADD_ACTIVE(code - start_code + 1 + LINK_SIZE, 0);        ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0);
814        break;        break;
815    
816        /*-----------------------------------------------------------------*/        /*-----------------------------------------------------------------*/
817        case OP_SKIPZERO:        case OP_SKIPZERO:
818        code += 1 + GET(code, 2);        code += 1 + GET(code, 2);
819        while (*code == OP_ALT) code += GET(code, 1);        while (*code == OP_ALT) code += GET(code, 1);
820        ADD_ACTIVE(code - start_code + 1 + LINK_SIZE, 0);        ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0);
821        break;        break;
822    
823        /*-----------------------------------------------------------------*/        /*-----------------------------------------------------------------*/
# Line 800  for (;;) Line 917  for (;;)
917          if (ptr > start_subject)          if (ptr > start_subject)
918            {            {
919            const uschar *temp = ptr - 1;            const uschar *temp = ptr - 1;
920              if (temp < md->start_used_ptr) md->start_used_ptr = temp;
921  #ifdef SUPPORT_UTF8  #ifdef SUPPORT_UTF8
922            if (utf8) BACKCHAR(temp);            if (utf8) BACKCHAR(temp);
923  #endif  #endif
924            GETCHARTEST(d, temp);            GETCHARTEST(d, temp);
925    #ifdef SUPPORT_UCP
926              if ((md->poptions & PCRE_UCP) != 0)
927                {
928                if (d == '_') left_word = TRUE; else
929                  {
930                  int cat = UCD_CATEGORY(d);
931                  left_word = (cat == ucp_L || cat == ucp_N);
932                  }
933                }
934              else
935    #endif
936            left_word = d < 256 && (ctypes[d] & ctype_word) != 0;            left_word = d < 256 && (ctypes[d] & ctype_word) != 0;
937            }            }
938          else left_word = 0;          else left_word = FALSE;
939    
940          if (clen > 0)          if (clen > 0)
941              {
942    #ifdef SUPPORT_UCP
943              if ((md->poptions & PCRE_UCP) != 0)
944                {
945                if (c == '_') right_word = TRUE; else
946                  {
947                  int cat = UCD_CATEGORY(c);
948                  right_word = (cat == ucp_L || cat == ucp_N);
949                  }
950                }
951              else
952    #endif
953            right_word = c < 256 && (ctypes[c] & ctype_word) != 0;            right_word = c < 256 && (ctypes[c] & ctype_word) != 0;
954          else              /* This is a fudge to ensure that if this is the */            }
955            {               /* last item in the pattern, we don't count it as */          else right_word = FALSE;
           reached_end--;  /* reached, thus disabling a partial match. */  
           right_word = 0;  
           }  
956    
957          if ((left_word == right_word) == (codevalue == OP_NOT_WORD_BOUNDARY))          if ((left_word == right_word) == (codevalue == OP_NOT_WORD_BOUNDARY))
958            { ADD_ACTIVE(state_offset + 1, 0); }            { ADD_ACTIVE(state_offset + 1, 0); }
# Line 841  for (;;) Line 979  for (;;)
979            break;            break;
980    
981            case PT_LAMP:            case PT_LAMP:
982            OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll || prop->chartype == ucp_Lt;            OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll ||
983                   prop->chartype == ucp_Lt;
984            break;            break;
985    
986            case PT_GC:            case PT_GC:
# Line 856  for (;;) Line 995  for (;;)
995            OK = prop->script == code[2];            OK = prop->script == code[2];
996            break;            break;
997    
998              /* These are specials for combination cases. */
999    
1000              case PT_ALNUM:
1001              OK = _pcre_ucp_gentype[prop->chartype] == ucp_L ||
1002                   _pcre_ucp_gentype[prop->chartype] == ucp_N;
1003              break;
1004    
1005              case PT_SPACE:    /* Perl space */
1006              OK = _pcre_ucp_gentype[prop->chartype] == ucp_Z ||
1007                   c == CHAR_HT || c == CHAR_NL || c == CHAR_FF || c == CHAR_CR;
1008              break;
1009    
1010              case PT_PXSPACE:  /* POSIX space */
1011              OK = _pcre_ucp_gentype[prop->chartype] == ucp_Z ||
1012                   c == CHAR_HT || c == CHAR_NL || c == CHAR_VT ||
1013                   c == CHAR_FF || c == CHAR_CR;
1014              break;
1015    
1016              case PT_WORD:
1017              OK = _pcre_ucp_gentype[prop->chartype] == ucp_L ||
1018                   _pcre_ucp_gentype[prop->chartype] == ucp_N ||
1019                   c == CHAR_UNDERSCORE;
1020              break;
1021    
1022            /* Should never occur, but keep compilers from grumbling. */            /* Should never occur, but keep compilers from grumbling. */
1023    
1024            default:            default:
# Line 1010  for (;;) Line 1173  for (;;)
1173            break;            break;
1174    
1175            case PT_LAMP:            case PT_LAMP:
1176            OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll || prop->chartype == ucp_Lt;            OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll ||
1177                prop->chartype == ucp_Lt;
1178            break;            break;
1179    
1180            case PT_GC:            case PT_GC:
# Line 1025  for (;;) Line 1189  for (;;)
1189            OK = prop->script == code[3];            OK = prop->script == code[3];
1190            break;            break;
1191    
1192              /* These are specials for combination cases. */
1193    
1194              case PT_ALNUM:
1195              OK = _pcre_ucp_gentype[prop->chartype] == ucp_L ||
1196                   _pcre_ucp_gentype[prop->chartype] == ucp_N;
1197              break;
1198    
1199              case PT_SPACE:    /* Perl space */
1200              OK = _pcre_ucp_gentype[prop->chartype] == ucp_Z ||
1201                   c == CHAR_HT || c == CHAR_NL || c == CHAR_FF || c == CHAR_CR;
1202              break;
1203    
1204              case PT_PXSPACE:  /* POSIX space */
1205              OK = _pcre_ucp_gentype[prop->chartype] == ucp_Z ||
1206                   c == CHAR_HT || c == CHAR_NL || c == CHAR_VT ||
1207                   c == CHAR_FF || c == CHAR_CR;
1208              break;
1209    
1210              case PT_WORD:
1211              OK = _pcre_ucp_gentype[prop->chartype] == ucp_L ||
1212                   _pcre_ucp_gentype[prop->chartype] == ucp_N ||
1213                   c == CHAR_UNDERSCORE;
1214              break;
1215    
1216            /* Should never occur, but keep compilers from grumbling. */            /* Should never occur, but keep compilers from grumbling. */
1217    
1218            default:            default:
# Line 1232  for (;;) Line 1420  for (;;)
1420            break;            break;
1421    
1422            case PT_LAMP:            case PT_LAMP:
1423            OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll || prop->chartype == ucp_Lt;            OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll ||
1424                prop->chartype == ucp_Lt;
1425            break;            break;
1426    
1427            case PT_GC:            case PT_GC:
# Line 1247  for (;;) Line 1436  for (;;)
1436            OK = prop->script == code[3];            OK = prop->script == code[3];
1437            break;            break;
1438    
1439              /* These are specials for combination cases. */
1440    
1441              case PT_ALNUM:
1442              OK = _pcre_ucp_gentype[prop->chartype] == ucp_L ||
1443                   _pcre_ucp_gentype[prop->chartype] == ucp_N;
1444              break;
1445    
1446              case PT_SPACE:    /* Perl space */
1447              OK = _pcre_ucp_gentype[prop->chartype] == ucp_Z ||
1448                   c == CHAR_HT || c == CHAR_NL || c == CHAR_FF || c == CHAR_CR;
1449              break;
1450    
1451              case PT_PXSPACE:  /* POSIX space */
1452              OK = _pcre_ucp_gentype[prop->chartype] == ucp_Z ||
1453                   c == CHAR_HT || c == CHAR_NL || c == CHAR_VT ||
1454                   c == CHAR_FF || c == CHAR_CR;
1455              break;
1456    
1457              case PT_WORD:
1458              OK = _pcre_ucp_gentype[prop->chartype] == ucp_L ||
1459                   _pcre_ucp_gentype[prop->chartype] == ucp_N ||
1460                   c == CHAR_UNDERSCORE;
1461              break;
1462    
1463            /* Should never occur, but keep compilers from grumbling. */            /* Should never occur, but keep compilers from grumbling. */
1464    
1465            default:            default:
# Line 1479  for (;;) Line 1692  for (;;)
1692            break;            break;
1693    
1694            case PT_LAMP:            case PT_LAMP:
1695            OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll || prop->chartype == ucp_Lt;            OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll ||
1696                prop->chartype == ucp_Lt;
1697            break;            break;
1698    
1699            case PT_GC:            case PT_GC:
# Line 1494  for (;;) Line 1708  for (;;)
1708            OK = prop->script == code[5];            OK = prop->script == code[5];
1709            break;            break;
1710    
1711              /* These are specials for combination cases. */
1712    
1713              case PT_ALNUM:
1714              OK = _pcre_ucp_gentype[prop->chartype] == ucp_L ||
1715                   _pcre_ucp_gentype[prop->chartype] == ucp_N;
1716              break;
1717    
1718              case PT_SPACE:    /* Perl space */
1719              OK = _pcre_ucp_gentype[prop->chartype] == ucp_Z ||
1720                   c == CHAR_HT || c == CHAR_NL || c == CHAR_FF || c == CHAR_CR;
1721              break;
1722    
1723              case PT_PXSPACE:  /* POSIX space */
1724              OK = _pcre_ucp_gentype[prop->chartype] == ucp_Z ||
1725                   c == CHAR_HT || c == CHAR_NL || c == CHAR_VT ||
1726                   c == CHAR_FF || c == CHAR_CR;
1727              break;
1728    
1729              case PT_WORD:
1730              OK = _pcre_ucp_gentype[prop->chartype] == ucp_L ||
1731                   _pcre_ucp_gentype[prop->chartype] == ucp_N ||
1732                   c == CHAR_UNDERSCORE;
1733              break;
1734    
1735            /* Should never occur, but keep compilers from grumbling. */            /* Should never occur, but keep compilers from grumbling. */
1736    
1737            default:            default:
# Line 2121  for (;;) Line 2359  for (;;)
2359          points to the byte after the end of the class. If there is a          points to the byte after the end of the class. If there is a
2360          quantifier, this is where it will be. */          quantifier, this is where it will be. */
2361    
2362          next_state_offset = ecode - start_code;          next_state_offset = (int)(ecode - start_code);
2363    
2364          switch (*ecode)          switch (*ecode)
2365            {            {
# Line 2192  for (;;) Line 2430  for (;;)
2430            md,                                   /* static match data */            md,                                   /* static match data */
2431            code,                                 /* this subexpression's code */            code,                                 /* this subexpression's code */
2432            ptr,                                  /* where we currently are */            ptr,                                  /* where we currently are */
2433            ptr - start_subject,                  /* start offset */            (int)(ptr - start_subject),           /* start offset */
2434            local_offsets,                        /* offset vector */            local_offsets,                        /* offset vector */
2435            sizeof(local_offsets)/sizeof(int),    /* size of same */            sizeof(local_offsets)/sizeof(int),    /* size of same */
2436            local_workspace,                      /* workspace vector */            local_workspace,                      /* workspace vector */
# Line 2201  for (;;) Line 2439  for (;;)
2439            rlevel,                               /* function recursion level */            rlevel,                               /* function recursion level */
2440            recursing);                           /* pass on regex recursion */            recursing);                           /* pass on regex recursion */
2441    
2442            if (rc == PCRE_ERROR_DFA_UITEM) return rc;
2443          if ((rc >= 0) == (codevalue == OP_ASSERT || codevalue == OP_ASSERTBACK))          if ((rc >= 0) == (codevalue == OP_ASSERT || codevalue == OP_ASSERTBACK))
2444              { ADD_ACTIVE(endasscode + LINK_SIZE + 1 - start_code, 0); }              { ADD_ACTIVE((int)(endasscode + LINK_SIZE + 1 - start_code), 0); }
2445          }          }
2446        break;        break;
2447    
# Line 2229  for (;;) Line 2468  for (;;)
2468              cb.callout_number   = code[LINK_SIZE+2];              cb.callout_number   = code[LINK_SIZE+2];
2469              cb.offset_vector    = offsets;              cb.offset_vector    = offsets;
2470              cb.subject          = (PCRE_SPTR)start_subject;              cb.subject          = (PCRE_SPTR)start_subject;
2471              cb.subject_length   = end_subject - start_subject;              cb.subject_length   = (int)(end_subject - start_subject);
2472              cb.start_match      = current_subject - start_subject;              cb.start_match      = (int)(current_subject - start_subject);
2473              cb.current_position = ptr - start_subject;              cb.current_position = (int)(ptr - start_subject);
2474              cb.pattern_position = GET(code, LINK_SIZE + 3);              cb.pattern_position = GET(code, LINK_SIZE + 3);
2475              cb.next_item_length = GET(code, 3 + 2*LINK_SIZE);              cb.next_item_length = GET(code, 3 + 2*LINK_SIZE);
2476              cb.capture_top      = 1;              cb.capture_top      = 1;
# Line 2247  for (;;) Line 2486  for (;;)
2486    
2487          /* Back reference conditions are not supported */          /* Back reference conditions are not supported */
2488    
2489          if (condcode == OP_CREF) return PCRE_ERROR_DFA_UCOND;          if (condcode == OP_CREF || condcode == OP_NCREF)
2490              return PCRE_ERROR_DFA_UCOND;
2491    
2492          /* The DEFINE condition is always false */          /* The DEFINE condition is always false */
2493    
# Line 2258  for (;;) Line 2498  for (;;)
2498          which means "test if in any recursion". We can't test for specifically          which means "test if in any recursion". We can't test for specifically
2499          recursed groups. */          recursed groups. */
2500    
2501          else if (condcode == OP_RREF)          else if (condcode == OP_RREF || condcode == OP_NRREF)
2502            {            {
2503            int value = GET2(code, LINK_SIZE+2);            int value = GET2(code, LINK_SIZE+2);
2504            if (value != RREF_ANY) return PCRE_ERROR_DFA_UCOND;            if (value != RREF_ANY) return PCRE_ERROR_DFA_UCOND;
# Line 2281  for (;;) Line 2521  for (;;)
2521              md,                                   /* fixed match data */              md,                                   /* fixed match data */
2522              asscode,                              /* this subexpression's code */              asscode,                              /* this subexpression's code */
2523              ptr,                                  /* where we currently are */              ptr,                                  /* where we currently are */
2524              ptr - start_subject,                  /* start offset */              (int)(ptr - start_subject),           /* start offset */
2525              local_offsets,                        /* offset vector */              local_offsets,                        /* offset vector */
2526              sizeof(local_offsets)/sizeof(int),    /* size of same */              sizeof(local_offsets)/sizeof(int),    /* size of same */
2527              local_workspace,                      /* workspace vector */              local_workspace,                      /* workspace vector */
# Line 2290  for (;;) Line 2530  for (;;)
2530              rlevel,                               /* function recursion level */              rlevel,                               /* function recursion level */
2531              recursing);                           /* pass on regex recursion */              recursing);                           /* pass on regex recursion */
2532    
2533              if (rc == PCRE_ERROR_DFA_UITEM) return rc;
2534            if ((rc >= 0) ==            if ((rc >= 0) ==
2535                  (condcode == OP_ASSERT || condcode == OP_ASSERTBACK))                  (condcode == OP_ASSERT || condcode == OP_ASSERTBACK))
2536              { ADD_ACTIVE(endasscode + LINK_SIZE + 1 - start_code, 0); }              { ADD_ACTIVE((int)(endasscode + LINK_SIZE + 1 - start_code), 0); }
2537            else            else
2538              { ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); }              { ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); }
2539            }            }
# Line 2313  for (;;) Line 2554  for (;;)
2554            md,                                   /* fixed match data */            md,                                   /* fixed match data */
2555            start_code + GET(code, 1),            /* this subexpression's code */            start_code + GET(code, 1),            /* this subexpression's code */
2556            ptr,                                  /* where we currently are */            ptr,                                  /* where we currently are */
2557            ptr - start_subject,                  /* start offset */            (int)(ptr - start_subject),           /* start offset */
2558            local_offsets,                        /* offset vector */            local_offsets,                        /* offset vector */
2559            sizeof(local_offsets)/sizeof(int),    /* size of same */            sizeof(local_offsets)/sizeof(int),    /* size of same */
2560            local_workspace,                      /* workspace vector */            local_workspace,                      /* workspace vector */
# Line 2365  for (;;) Line 2606  for (;;)
2606            md,                                   /* fixed match data */            md,                                   /* fixed match data */
2607            code,                                 /* this subexpression's code */            code,                                 /* this subexpression's code */
2608            ptr,                                  /* where we currently are */            ptr,                                  /* where we currently are */
2609            ptr - start_subject,                  /* start offset */            (int)(ptr - start_subject),           /* start offset */
2610            local_offsets,                        /* offset vector */            local_offsets,                        /* offset vector */
2611            sizeof(local_offsets)/sizeof(int),    /* size of same */            sizeof(local_offsets)/sizeof(int),    /* size of same */
2612            local_workspace,                      /* workspace vector */            local_workspace,                      /* workspace vector */
# Line 2382  for (;;) Line 2623  for (;;)
2623    
2624            do { end_subpattern += GET(end_subpattern, 1); }            do { end_subpattern += GET(end_subpattern, 1); }
2625              while (*end_subpattern == OP_ALT);              while (*end_subpattern == OP_ALT);
2626            next_state_offset = end_subpattern - start_code + LINK_SIZE + 1;            next_state_offset =
2627                (int)(end_subpattern - start_code + LINK_SIZE + 1);
2628    
2629            /* If the end of this subpattern is KETRMAX or KETRMIN, we must            /* If the end of this subpattern is KETRMAX or KETRMIN, we must
2630            arrange for the repeat state also to be added to the relevant list.            arrange for the repeat state also to be added to the relevant list.
# Line 2390  for (;;) Line 2632  for (;;)
2632    
2633            repeat_state_offset = (*end_subpattern == OP_KETRMAX ||            repeat_state_offset = (*end_subpattern == OP_KETRMAX ||
2634                                   *end_subpattern == OP_KETRMIN)?                                   *end_subpattern == OP_KETRMIN)?
2635              end_subpattern - start_code - GET(end_subpattern, 1) : -1;              (int)(end_subpattern - start_code - GET(end_subpattern, 1)) : -1;
2636    
2637            /* If we have matched an empty string, add the next state at the            /* If we have matched an empty string, add the next state at the
2638            current character pointer. This is important so that the duplicate            current character pointer. This is important so that the duplicate
# Line 2454  for (;;) Line 2696  for (;;)
2696          cb.callout_number   = code[1];          cb.callout_number   = code[1];
2697          cb.offset_vector    = offsets;          cb.offset_vector    = offsets;
2698          cb.subject          = (PCRE_SPTR)start_subject;          cb.subject          = (PCRE_SPTR)start_subject;
2699          cb.subject_length   = end_subject - start_subject;          cb.subject_length   = (int)(end_subject - start_subject);
2700          cb.start_match      = current_subject - start_subject;          cb.start_match      = (int)(current_subject - start_subject);
2701          cb.current_position = ptr - start_subject;          cb.current_position = (int)(ptr - start_subject);
2702          cb.pattern_position = GET(code, 2);          cb.pattern_position = GET(code, 2);
2703          cb.next_item_length = GET(code, 2 + LINK_SIZE);          cb.next_item_length = GET(code, 2 + LINK_SIZE);
2704          cb.capture_top      = 1;          cb.capture_top      = 1;
# Line 2481  for (;;) Line 2723  for (;;)
2723    /* We have finished the processing at the current subject character. If no    /* We have finished the processing at the current subject character. If no
2724    new states have been set for the next character, we have found all the    new states have been set for the next character, we have found all the
2725    matches that we are going to find. If we are at the top level and partial    matches that we are going to find. If we are at the top level and partial
2726    matching has been requested, check for appropriate conditions. The "forced_    matching has been requested, check for appropriate conditions.
2727    fail" variable counts the number of (*F) encountered for the character. If it  
2728    is equal to the original active_count (saved in workspace[1]) it means that    The "forced_ fail" variable counts the number of (*F) encountered for the
2729    (*F) was found on every active state. In this case we don't want to give a    character. If it is equal to the original active_count (saved in
2730    partial match. */    workspace[1]) it means that (*F) was found on every active state. In this
2731      case we don't want to give a partial match.
2732    
2733      The "could_continue" variable is true if a state could have continued but
2734      for the fact that the end of the subject was reached. */
2735    
2736    if (new_count <= 0)    if (new_count <= 0)
2737      {      {
2738      if (rlevel == 1 &&                               /* Top level, and */      if (rlevel == 1 &&                               /* Top level, and */
2739          reached_end != workspace[1] &&               /* Not all reached end */          could_continue &&                            /* Some could go on */
2740          forced_fail != workspace[1] &&               /* Not all forced fail & */          forced_fail != workspace[1] &&               /* Not all forced fail & */
2741          (                                            /* either... */          (                                            /* either... */
2742          (md->moptions & PCRE_PARTIAL_HARD) != 0      /* Hard partial */          (md->moptions & PCRE_PARTIAL_HARD) != 0      /* Hard partial */
# Line 2503  for (;;) Line 2749  for (;;)
2749        {        {
2750        if (offsetcount >= 2)        if (offsetcount >= 2)
2751          {          {
2752          offsets[0] = current_subject - start_subject;          offsets[0] = (int)(md->start_used_ptr - start_subject);
2753          offsets[1] = end_subject - start_subject;          offsets[1] = (int)(end_subject - start_subject);
2754          }          }
2755        match_count = PCRE_ERROR_PARTIAL;        match_count = PCRE_ERROR_PARTIAL;
2756        }        }
# Line 2645  md->start_code = (const uschar *)argumen Line 2891  md->start_code = (const uschar *)argumen
2891      re->name_table_offset + re->name_count * re->name_entry_size;      re->name_table_offset + re->name_count * re->name_entry_size;
2892  md->start_subject = (const unsigned char *)subject;  md->start_subject = (const unsigned char *)subject;
2893  md->end_subject = end_subject;  md->end_subject = end_subject;
2894    md->start_offset = start_offset;
2895  md->moptions = options;  md->moptions = options;
2896  md->poptions = re->options;  md->poptions = re->options;
2897    
# Line 2749  if (!anchored) Line 2996  if (!anchored)
2996      }      }
2997    else    else
2998      {      {
2999      if (startline && study != NULL &&      if (!startline && study != NULL &&
3000           (study->options & PCRE_STUDY_MAPPED) != 0)           (study->flags & PCRE_STUDY_MAPPED) != 0)
3001        start_bits = study->start_bits;        start_bits = study->start_bits;
3002      }      }
3003    }    }
# Line 2801  for (;;) Line 3048  for (;;)
3048        }        }
3049    
3050      /* There are some optimizations that avoid running the match if a known      /* There are some optimizations that avoid running the match if a known
3051      starting point is not found, or if a known later character is not present.      starting point is not found. However, there is an option that disables
3052      However, there is an option that disables these, for testing and for      these, for testing and for ensuring that all callouts do actually occur. */
     ensuring that all callouts do actually occur. */  
3053    
3054      if ((options & PCRE_NO_START_OPTIMIZE) == 0)      if ((options & PCRE_NO_START_OPTIMIZE) == 0)
3055        {        {
   
3056        /* Advance to a known first byte. */        /* Advance to a known first byte. */
3057    
3058        if (first_byte >= 0)        if (first_byte >= 0)
# Line 2873  for (;;) Line 3118  for (;;)
3118      /* Restore fudged end_subject */      /* Restore fudged end_subject */
3119    
3120      end_subject = save_end_subject;      end_subject = save_end_subject;
     }  
3121    
3122    /* If req_byte is set, we know that that character must appear in the subject      /* The following two optimizations are disabled for partial matching or if
3123    for the match to succeed. If the first character is set, req_byte must be      disabling is explicitly requested (and of course, by the test above, this
3124    later in the subject; otherwise the test starts at the match point. This      code is not obeyed when restarting after a partial match). */
   optimization can save a huge amount of work in patterns with nested unlimited  
   repeats that aren't going to match. Writing separate code for cased/caseless  
   versions makes it go faster, as does using an autoincrement and backing off  
   on a match.  
   
   HOWEVER: when the subject string is very, very long, searching to its end can  
   take a long time, and give bad performance on quite ordinary patterns. This  
   showed up when somebody was matching /^C/ on a 32-megabyte string... so we  
   don't do this when the string is sufficiently long.  
   
   ALSO: this processing is disabled when partial matching is requested, and can  
   also be explicitly deactivated. Furthermore, we have to disable when  
   restarting after a partial match, because the required character may have  
   already been matched. */  
   
   if ((options & PCRE_NO_START_OPTIMIZE) == 0 &&  
       req_byte >= 0 &&  
       end_subject - current_subject < REQ_BYTE_MAX &&  
       (options & (PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT|PCRE_DFA_RESTART)) == 0)  
     {  
     register const uschar *p = current_subject + ((first_byte >= 0)? 1 : 0);  
   
     /* We don't need to repeat the search if we haven't yet reached the  
     place we found it at last time. */  
3125    
3126      if (p > req_byte_ptr)      if ((options & PCRE_NO_START_OPTIMIZE) == 0 &&
3127            (options & (PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT)) == 0)
3128        {        {
3129        if (req_byte_caseless)        /* If the pattern was studied, a minimum subject length may be set. This
3130          {        is a lower bound; no actual string of that length may actually match the
3131          while (p < end_subject)        pattern. Although the value is, strictly, in characters, we treat it as
3132            {        bytes to avoid spending too much time in this optimization. */
3133            register int pp = *p++;  
3134            if (pp == req_byte || pp == req_byte2) { p--; break; }        if (study != NULL && (study->flags & PCRE_STUDY_MINLEN) != 0 &&
3135            }            (pcre_uint32)(end_subject - current_subject) < study->minlength)
3136          }          return PCRE_ERROR_NOMATCH;
3137        else  
3138          /* If req_byte is set, we know that that character must appear in the
3139          subject for the match to succeed. If the first character is set, req_byte
3140          must be later in the subject; otherwise the test starts at the match
3141          point. This optimization can save a huge amount of work in patterns with
3142          nested unlimited repeats that aren't going to match. Writing separate
3143          code for cased/caseless versions makes it go faster, as does using an
3144          autoincrement and backing off on a match.
3145    
3146          HOWEVER: when the subject string is very, very long, searching to its end
3147          can take a long time, and give bad performance on quite ordinary
3148          patterns. This showed up when somebody was matching /^C/ on a 32-megabyte
3149          string... so we don't do this when the string is sufficiently long. */
3150    
3151          if (req_byte >= 0 && end_subject - current_subject < REQ_BYTE_MAX)
3152          {          {
3153          while (p < end_subject)          register const uschar *p = current_subject + ((first_byte >= 0)? 1 : 0);
3154    
3155            /* We don't need to repeat the search if we haven't yet reached the
3156            place we found it at last time. */
3157    
3158            if (p > req_byte_ptr)
3159            {            {
3160            if (*p++ == req_byte) { p--; break; }            if (req_byte_caseless)
3161            }              {
3162          }              while (p < end_subject)
3163                  {
3164                  register int pp = *p++;
3165                  if (pp == req_byte || pp == req_byte2) { p--; break; }
3166                  }
3167                }
3168              else
3169                {
3170                while (p < end_subject)
3171                  {
3172                  if (*p++ == req_byte) { p--; break; }
3173                  }
3174                }
3175    
3176        /* If we can't find the required character, break the matching loop,            /* If we can't find the required character, break the matching loop,
3177        which will cause a return or PCRE_ERROR_NOMATCH. */            which will cause a return or PCRE_ERROR_NOMATCH. */
3178    
3179        if (p >= end_subject) break;            if (p >= end_subject) break;
3180    
3181        /* If we have found the required character, save the point where we            /* If we have found the required character, save the point where we
3182        found it, so that we don't search again next time round the loop if            found it, so that we don't search again next time round the loop if
3183        the start hasn't passed this character yet. */            the start hasn't passed this character yet. */
3184    
3185        req_byte_ptr = p;            req_byte_ptr = p;
3186              }
3187            }
3188        }        }
3189      }      }   /* End of optimizations that are done when not restarting */
3190    
3191    /* OK, now we can do the business */    /* OK, now we can do the business */
3192    
3193      md->start_used_ptr = current_subject;
3194    
3195    rc = internal_dfa_exec(    rc = internal_dfa_exec(
3196      md,                                /* fixed match data */      md,                                /* fixed match data */
3197      md->start_code,                    /* this subexpression's code */      md->start_code,                    /* this subexpression's code */

Legend:
Removed from v.428  
changed lines
  Added in v.535

  ViewVC Help
Powered by ViewVC 1.1.5