/[pcre]/code/trunk/pcre_exec.c
ViewVC logotype

Diff of /code/trunk/pcre_exec.c

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 1364 by ph10, Sat Oct 5 15:45:11 2013 UTC revision 1365 by ph10, Sun Oct 6 18:33:56 2013 UTC
# Line 1274  for (;;) Line 1274  for (;;)
1274    
1275      /* Control never reaches here. */      /* Control never reaches here. */
1276    
1277      /* Conditional group: compilation checked that there are no more than      /* Conditional group: compilation checked that there are no more than two
1278      two branches. If the condition is false, skipping the first branch takes us      branches. If the condition is false, skipping the first branch takes us
1279      past the end if there is only one branch, but that's OK because that is      past the end of the item if there is only one branch, but that's exactly
1280      exactly what going to the ket would do. */      what we want. */
1281    
1282      case OP_COND:      case OP_COND:
1283      case OP_SCOND:      case OP_SCOND:
1284      codelink = GET(ecode, 1);  
1285        /* The variable codelink will be added to ecode when the condition is
1286        false, to get to the second branch. Setting it to the offset to the ALT
1287        or KET, then incrementing ecode achieves this effect. We now have ecode
1288        pointing to the condition or callout. */
1289    
1290        codelink = GET(ecode, 1);   /* Offset to the second branch */
1291        ecode += 1 + LINK_SIZE;     /* From this opcode */
1292    
1293      /* Because of the way auto-callout works during compile, a callout item is      /* Because of the way auto-callout works during compile, a callout item is
1294      inserted between OP_COND and an assertion condition. */      inserted between OP_COND and an assertion condition. */
1295    
1296      if (ecode[LINK_SIZE+1] == OP_CALLOUT)      if (*ecode == OP_CALLOUT)
1297        {        {
1298        if (PUBL(callout) != NULL)        if (PUBL(callout) != NULL)
1299          {          {
1300          PUBL(callout_block) cb;          PUBL(callout_block) cb;
1301          cb.version          = 2;   /* Version 1 of the callout block */          cb.version          = 2;   /* Version 1 of the callout block */
1302          cb.callout_number   = ecode[LINK_SIZE+2];          cb.callout_number   = ecode[1];
1303          cb.offset_vector    = md->offset_vector;          cb.offset_vector    = md->offset_vector;
1304  #if defined COMPILE_PCRE8  #if defined COMPILE_PCRE8
1305          cb.subject          = (PCRE_SPTR)md->start_subject;          cb.subject          = (PCRE_SPTR)md->start_subject;
# Line 1304  for (;;) Line 1311  for (;;)
1311          cb.subject_length   = (int)(md->end_subject - md->start_subject);          cb.subject_length   = (int)(md->end_subject - md->start_subject);
1312          cb.start_match      = (int)(mstart - md->start_subject);          cb.start_match      = (int)(mstart - md->start_subject);
1313          cb.current_position = (int)(eptr - md->start_subject);          cb.current_position = (int)(eptr - md->start_subject);
1314          cb.pattern_position = GET(ecode, LINK_SIZE + 3);          cb.pattern_position = GET(ecode, 2);
1315          cb.next_item_length = GET(ecode, 3 + 2*LINK_SIZE);          cb.next_item_length = GET(ecode, 2 + LINK_SIZE);
1316          cb.capture_top      = offset_top/2;          cb.capture_top      = offset_top/2;
1317          cb.capture_last     = md->capture_last & CAPLMASK;          cb.capture_last     = md->capture_last & CAPLMASK;
1318          /* Internal change requires this for API compatibility. */          /* Internal change requires this for API compatibility. */
# Line 1315  for (;;) Line 1322  for (;;)
1322          if ((rrc = (*PUBL(callout))(&cb)) > 0) RRETURN(MATCH_NOMATCH);          if ((rrc = (*PUBL(callout))(&cb)) > 0) RRETURN(MATCH_NOMATCH);
1323          if (rrc < 0) RRETURN(rrc);          if (rrc < 0) RRETURN(rrc);
1324          }          }
1325    
1326          /* Advance ecode past the callout, so it now points to the condition. We
1327          must adjust codelink so that the value of ecode+codelink is unchanged. */
1328    
1329        ecode += PRIV(OP_lengths)[OP_CALLOUT];        ecode += PRIV(OP_lengths)[OP_CALLOUT];
1330        codelink -= PRIV(OP_lengths)[OP_CALLOUT];        codelink -= PRIV(OP_lengths)[OP_CALLOUT];
1331        }        }
1332    
1333      condcode = ecode[LINK_SIZE+1];      /* Test the various possible conditions */
   
     /* Now see what the actual condition is */  
1334    
1335      if (condcode == OP_RREF || condcode == OP_NRREF)    /* Recursion test */      condition = FALSE;
1336        {      switch(condcode = *ecode)
1337        if (md->recursive == NULL)                /* Not recursing => FALSE */        {
1338          case OP_RREF:         /* Numbered group recursion test */
1339          if (md->recursive != NULL)     /* Not recursing => FALSE */
1340          {          {
1341          condition = FALSE;          unsigned int recno = GET2(ecode, 1);   /* Recursion group number*/
         ecode += GET(ecode, 1);  
         }  
       else  
         {  
         unsigned int recno = GET2(ecode, LINK_SIZE + 2);   /* Recursion group number*/  
1342          condition = (recno == RREF_ANY || recno == md->recursive->group_num);          condition = (recno == RREF_ANY || recno == md->recursive->group_num);
1343            }
1344          break;
1345    
1346          /* If the test is for recursion into a specific subpattern, and it is        case OP_DNRREF:       /* Duplicate named group recursion test */
1347          false, but the test was set up by name, scan the table to see if the        if (md->recursive != NULL)
1348          name refers to any other numbers, and test them. The condition is true          {
1349          if any one is set. */          int count = GET2(ecode, 1 + IMM2_SIZE);
1350            pcre_uchar *slot = md->name_table + GET2(ecode, 1) * md->name_entry_size;
1351          if (!condition && condcode == OP_NRREF)          while (count-- > 0)
1352            {            {
1353            pcre_uchar *slotA = md->name_table;            unsigned int recno = GET2(slot, 0);
1354            for (i = 0; i < md->name_count; i++)            condition = recno == md->recursive->group_num;
1355              {            if (condition) break;
1356              if (GET2(slotA, 0) == recno) break;            slot += md->name_entry_size;
             slotA += md->name_entry_size;  
             }  
   
           /* Found a name for the number - there can be only one; duplicate  
           names for different numbers are allowed, but not vice versa. First  
           scan down for duplicates. */  
   
           if (i < md->name_count)  
             {  
             pcre_uchar *slotB = slotA;  
             while (slotB > md->name_table)  
               {  
               slotB -= md->name_entry_size;  
               if (STRCMP_UC_UC(slotA + IMM2_SIZE, slotB + IMM2_SIZE) == 0)  
                 {  
                 condition = GET2(slotB, 0) == md->recursive->group_num;  
                 if (condition) break;  
                 }  
               else break;  
               }  
   
             /* Scan up for duplicates */  
   
             if (!condition)  
               {  
               slotB = slotA;  
               for (i++; i < md->name_count; i++)  
                 {  
                 slotB += md->name_entry_size;  
                 if (STRCMP_UC_UC(slotA + IMM2_SIZE, slotB + IMM2_SIZE) == 0)  
                   {  
                   condition = GET2(slotB, 0) == md->recursive->group_num;  
                   if (condition) break;  
                   }  
                 else break;  
                 }  
               }  
             }  
1357            }            }
1358            }
1359          break;
1360    
1361          /* Chose branch according to the condition */        case OP_CREF:         /* Numbered group used test */
1362          offset = GET2(ecode, 1) << 1;  /* Doubled ref number */
         ecode += condition? 1 + IMM2_SIZE : GET(ecode, 1);  
         }  
       }  
   
     else if (condcode == OP_CREF || condcode == OP_NCREF)  /* Group used test */  
       {  
       offset = GET2(ecode, LINK_SIZE+2) << 1;  /* Doubled ref number */  
1363        condition = offset < offset_top && md->offset_vector[offset] >= 0;        condition = offset < offset_top && md->offset_vector[offset] >= 0;
1364          break;
1365    
1366        /* If the numbered capture is unset, but the reference was by name,        case OP_DNCREF:      /* Duplicate named group used test */
       scan the table to see if the name refers to any other numbers, and test  
       them. The condition is true if any one is set. This is tediously similar  
       to the code above, but not close enough to try to amalgamate. */  
   
       if (!condition && condcode == OP_NCREF)  
1367          {          {
1368          unsigned int refno = offset >> 1;          int count = GET2(ecode, 1 + IMM2_SIZE);
1369          pcre_uchar *slotA = md->name_table;          pcre_uchar *slot = md->name_table + GET2(ecode, 1) * md->name_entry_size;
1370            while (count-- > 0)
         for (i = 0; i < md->name_count; i++)  
           {  
           if (GET2(slotA, 0) == refno) break;  
           slotA += md->name_entry_size;  
           }  
   
         /* Found a name for the number - there can be only one; duplicate names  
         for different numbers are allowed, but not vice versa. First scan down  
         for duplicates. */  
   
         if (i < md->name_count)  
1371            {            {
1372            pcre_uchar *slotB = slotA;            offset = GET2(slot, 0) << 1;
1373            while (slotB > md->name_table)            condition = offset < offset_top && md->offset_vector[offset] >= 0;
1374              {            if (condition) break;
1375              slotB -= md->name_entry_size;            slot += md->name_entry_size;
             if (STRCMP_UC_UC(slotA + IMM2_SIZE, slotB + IMM2_SIZE) == 0)  
               {  
               offset = GET2(slotB, 0) << 1;  
               condition = offset < offset_top &&  
                 md->offset_vector[offset] >= 0;  
               if (condition) break;  
               }  
             else break;  
             }  
   
           /* Scan up for duplicates */  
   
           if (!condition)  
             {  
             slotB = slotA;  
             for (i++; i < md->name_count; i++)  
               {  
               slotB += md->name_entry_size;  
               if (STRCMP_UC_UC(slotA + IMM2_SIZE, slotB + IMM2_SIZE) == 0)  
                 {  
                 offset = GET2(slotB, 0) << 1;  
                 condition = offset < offset_top &&  
                   md->offset_vector[offset] >= 0;  
                 if (condition) break;  
                 }  
               else break;  
               }  
             }  
1376            }            }
1377          }          }
1378          break;
1379    
1380        /* Chose branch according to the condition */        case OP_DEF:     /* DEFINE - always false */
1381          break;
       ecode += condition? 1 + IMM2_SIZE : GET(ecode, 1);  
       }  
   
     else if (condcode == OP_DEF)     /* DEFINE - always false */  
       {  
       condition = FALSE;  
       ecode += GET(ecode, 1);  
       }  
   
     /* The condition is an assertion. Call match() to evaluate it - setting  
     md->match_function_type to MATCH_CONDASSERT causes it to stop at the end of  
     an assertion. */  
1382    
1383      else        /* The condition is an assertion. Call match() to evaluate it - setting
1384        {        md->match_function_type to MATCH_CONDASSERT causes it to stop at the end
1385          of an assertion. */
1386    
1387          default:
1388        md->match_function_type = MATCH_CONDASSERT;        md->match_function_type = MATCH_CONDASSERT;
1389        RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, NULL, RM3);        RMATCH(eptr, ecode, offset_top, md, NULL, RM3);
1390        if (rrc == MATCH_MATCH)        if (rrc == MATCH_MATCH)
1391          {          {
1392          if (md->end_offset_top > offset_top)          if (md->end_offset_top > offset_top)
1393            offset_top = md->end_offset_top;  /* Captures may have happened */            offset_top = md->end_offset_top;  /* Captures may have happened */
1394          condition = TRUE;          condition = TRUE;
1395          ecode += 1 + LINK_SIZE + GET(ecode, LINK_SIZE + 2);  
1396            /* Advance ecode past the assertion to the start of the first branch,
1397            but adjust it so that the general choosing code below works. */
1398    
1399            ecode += GET(ecode, 1);
1400          while (*ecode == OP_ALT) ecode += GET(ecode, 1);          while (*ecode == OP_ALT) ecode += GET(ecode, 1);
1401            ecode += 1 + LINK_SIZE - PRIV(OP_lengths)[condcode];
1402          }          }
1403    
1404        /* PCRE doesn't allow the effect of (*THEN) to escape beyond an        /* PCRE doesn't allow the effect of (*THEN) to escape beyond an
1405        assertion; it is therefore treated as NOMATCH. */        assertion; it is therefore treated as NOMATCH. Any other return is an
1406          error. */
1407    
1408        else if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN)        else if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN)
1409          {          {
1410          RRETURN(rrc);         /* Need braces because of following else */          RRETURN(rrc);         /* Need braces because of following else */
1411          }          }
1412        else        break;
         {  
         condition = FALSE;  
         ecode += codelink;  
         }  
1413        }        }
1414    
1415      /* We are now at the branch that is to be obeyed. As there is only one, can      /* Choose branch according to the condition */
1416      use tail recursion to avoid using another stack frame, except when there is  
1417      unlimited repeat of a possibly empty group. In the latter case, a recursive      ecode += condition? PRIV(OP_lengths)[condcode] : codelink;
1418      call to match() is always required, unless the second alternative doesn't  
1419      exist, in which case we can just plough on. Note that, for compatibility      /* We are now at the branch that is to be obeyed. As there is only one, we
1420      with Perl, the | in a conditional group is NOT treated as creating two      can use tail recursion to avoid using another stack frame, except when
1421      alternatives. If a THEN is encountered in the branch, it propagates out to      there is unlimited repeat of a possibly empty group. In the latter case, a
1422      the enclosing alternative (unless nested in a deeper set of alternatives,      recursive call to match() is always required, unless the second alternative
1423      of course). */      doesn't exist, in which case we can just plough on. Note that, for
1424        compatibility with Perl, the | in a conditional group is NOT treated as
1425      if (condition || *ecode == OP_ALT)      creating two alternatives. If a THEN is encountered in the branch, it
1426        propagates out to the enclosing alternative (unless nested in a deeper set
1427        of alternatives, of course). */
1428    
1429        if (condition || ecode[-(1+LINK_SIZE)] == OP_ALT)
1430        {        {
1431        if (op != OP_SCOND)        if (op != OP_SCOND)
1432          {          {
         ecode += 1 + LINK_SIZE;  
1433          goto TAIL_RECURSE;          goto TAIL_RECURSE;
1434          }          }
1435    
1436        md->match_function_type = MATCH_CBEGROUP;        md->match_function_type = MATCH_CBEGROUP;
1437        RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM49);        RMATCH(eptr, ecode, offset_top, md, eptrb, RM49);
1438        RRETURN(rrc);        RRETURN(rrc);
1439        }        }
1440    
# Line 1523  for (;;) Line 1442  for (;;)
1442    
1443      else      else
1444        {        {
       ecode += 1 + LINK_SIZE;  
1445        }        }
1446      break;      break;
1447    
# Line 2783  for (;;) Line 2701  for (;;)
2701      caseless = op == OP_REFI;      caseless = op == OP_REFI;
2702      offset = GET2(ecode, 1) << 1;               /* Doubled ref number */      offset = GET2(ecode, 1) << 1;               /* Doubled ref number */
2703      ecode += 1 + IMM2_SIZE;      ecode += 1 + IMM2_SIZE;
   
   
2704      if (offset >= offset_top || md->offset_vector[offset] < 0)      if (offset >= offset_top || md->offset_vector[offset] < 0)
2705        length = (md->jscript_compat)? 0 : -1;        length = (md->jscript_compat)? 0 : -1;
2706      else      else

Legend:
Removed from v.1364  
changed lines
  Added in v.1365

  ViewVC Help
Powered by ViewVC 1.1.5