/[pcre]/code/trunk/pcretest.c
ViewVC logotype

Diff of /code/trunk/pcretest.c

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 255 by ph10, Wed Sep 19 08:50:04 2007 UTC revision 1211 by ph10, Wed Nov 7 17:02:03 2012 UTC
# Line 4  Line 4 
4    
5  /* This program was hacked up as a tester for PCRE. I really should have  /* This program was hacked up as a tester for PCRE. I really should have
6  written it more tidily in the first place. Will I ever learn? It has grown and  written it more tidily in the first place. Will I ever learn? It has grown and
7  been extended and consequently is now rather, er, *very* untidy in places.  been extended and consequently is now rather, er, *very* untidy in places. The
8    addition of 16-bit support has made it even worse. :-(
9    
10  -----------------------------------------------------------------------------  -----------------------------------------------------------------------------
11  Redistribution and use in source and binary forms, with or without  Redistribution and use in source and binary forms, with or without
# Line 35  POSSIBILITY OF SUCH DAMAGE. Line 36  POSSIBILITY OF SUCH DAMAGE.
36  -----------------------------------------------------------------------------  -----------------------------------------------------------------------------
37  */  */
38    
39    /* This program now supports the testing of all of the 8-bit, 16-bit, and
40    32-bit PCRE libraries in a single program. This is different from the modules
41    such as pcre_compile.c in the library itself, which are compiled separately for
42    each mode. If two modes are enabled, for example, pcre_compile.c is compiled
43    twice. By contrast, pcretest.c is compiled only once. Therefore, it must not
44    make use of any of the macros from pcre_internal.h that depend on
45    COMPILE_PCRE8, COMPILE_PCRE16, or COMPILE_PCRE32. It does, however, make use of
46    SUPPORT_PCRE8, SUPPORT_PCRE16, and SUPPORT_PCRE32 to ensure that it calls only
47    supported library functions. */
48    
49  #ifdef HAVE_CONFIG_H  #ifdef HAVE_CONFIG_H
50  #include "config.h"  #include "config.h"
# Line 48  POSSIBILITY OF SUCH DAMAGE. Line 58  POSSIBILITY OF SUCH DAMAGE.
58  #include <locale.h>  #include <locale.h>
59  #include <errno.h>  #include <errno.h>
60    
61    /* Both libreadline and libedit are optionally supported. The user-supplied
62    original patch uses readline/readline.h for libedit, but in at least one system
63    it is installed as editline/readline.h, so the configuration code now looks for
64    that first, falling back to readline/readline.h. */
65    
66    #if defined(SUPPORT_LIBREADLINE) || defined(SUPPORT_LIBEDIT)
67    #ifdef HAVE_UNISTD_H
68    #include <unistd.h>
69    #endif
70    #if defined(SUPPORT_LIBREADLINE)
71    #include <readline/readline.h>
72    #include <readline/history.h>
73    #else
74    #if defined(HAVE_EDITLINE_READLINE_H)
75    #include <editline/readline.h>
76    #else
77    #include <readline/readline.h>
78    #endif
79    #endif
80    #endif
81    
82  /* A number of things vary for Windows builds. Originally, pcretest opened its  /* A number of things vary for Windows builds. Originally, pcretest opened its
83  input and output without "b"; then I was told that "b" was needed in some  input and output without "b"; then I was told that "b" was needed in some
# Line 63  input mode under Windows. */ Line 93  input mode under Windows. */
93  #define INPUT_MODE   "r"  #define INPUT_MODE   "r"
94  #define OUTPUT_MODE  "wb"  #define OUTPUT_MODE  "wb"
95    
96    #ifndef isatty
97    #define isatty _isatty         /* This is what Windows calls them, I'm told, */
98    #endif                         /* though in some environments they seem to   */
99                                   /* be already defined, hence the #ifndefs.    */
100    #ifndef fileno
101    #define fileno _fileno
102    #endif
103    
104    /* A user sent this fix for Borland Builder 5 under Windows. */
105    
106    #ifdef __BORLANDC__
107    #define _setmode(handle, mode) setmode(handle, mode)
108    #endif
109    
110    /* Not Windows */
111    
112  #else  #else
113  #include <sys/time.h>          /* These two includes are needed */  #include <sys/time.h>          /* These two includes are needed */
114  #include <sys/resource.h>      /* for setrlimit(). */  #include <sys/resource.h>      /* for setrlimit(). */
115    #if defined NATIVE_ZOS         /* z/OS uses non-binary I/O */
116    #define INPUT_MODE   "r"
117    #define OUTPUT_MODE  "w"
118    #else
119  #define INPUT_MODE   "rb"  #define INPUT_MODE   "rb"
120  #define OUTPUT_MODE  "wb"  #define OUTPUT_MODE  "wb"
121  #endif  #endif
122    #endif
123    
124    #define PRIV(name) name
125    
126  /* We have to include pcre_internal.h because we need the internal info for  /* We have to include pcre_internal.h because we need the internal info for
127  displaying the results of pcre_study() and we also need to know about the  displaying the results of pcre_study() and we also need to know about the
# Line 83  appropriately for an application, not fo Line 135  appropriately for an application, not fo
135  #include "pcre.h"  #include "pcre.h"
136  #include "pcre_internal.h"  #include "pcre_internal.h"
137    
138  /* We need access to the data tables that PCRE uses. So as not to have to keep  /* The pcre_printint() function, which prints the internal form of a compiled
139  two copies, we include the source file here, changing the names of the external  regex, is held in a separate file so that (a) it can be compiled in either
140  symbols to prevent clashes. */  8-, 16- or 32-bit mode, and (b) it can be #included directly in pcre_compile.c
141    when that is compiled in debug mode. */
 #define _pcre_utf8_table1      utf8_table1  
 #define _pcre_utf8_table1_size utf8_table1_size  
 #define _pcre_utf8_table2      utf8_table2  
 #define _pcre_utf8_table3      utf8_table3  
 #define _pcre_utf8_table4      utf8_table4  
 #define _pcre_utt              utt  
 #define _pcre_utt_size         utt_size  
 #define _pcre_utt_names        utt_names  
 #define _pcre_OP_lengths       OP_lengths  
142    
143  #include "pcre_tables.c"  #ifdef SUPPORT_PCRE8
144    void pcre_printint(pcre *external_re, FILE *f, BOOL print_lengths);
145    #endif
146    #ifdef SUPPORT_PCRE16
147    void pcre16_printint(pcre *external_re, FILE *f, BOOL print_lengths);
148    #endif
149    #ifdef SUPPORT_PCRE32
150    void pcre32_printint(pcre *external_re, FILE *f, BOOL print_lengths);
151    #endif
152    
153    /* We need access to some of the data tables that PCRE uses. So as not to have
154    to keep two copies, we include the source files here, changing the names of the
155    external symbols to prevent clashes. */
156    
157  /* We also need the pcre_printint() function for printing out compiled  #define PCRE_INCLUDED
 patterns. This function is in a separate file so that it can be included in  
 pcre_compile.c when that module is compiled with debugging enabled.  
158    
159  The definition of the macro PRINTABLE, which determines whether to print an  #include "pcre_tables.c"
160    #include "pcre_ucd.c"
161    
162    /* The definition of the macro PRINTABLE, which determines whether to print an
163  output character as-is or as a hex value when showing compiled patterns, is  output character as-is or as a hex value when showing compiled patterns, is
164  contained in this file. We uses it here also, in cases when the locale has not  the same as in the printint.src file. We uses it here in cases when the locale
165  been explicitly changed, so as to get consistent output from systems that  has not been explicitly changed, so as to get consistent output from systems
166  differ in their output from isprint() even in the "C" locale. */  that differ in their output from isprint() even in the "C" locale. */
167    
168  #include "pcre_printint.src"  #ifdef EBCDIC
169    #define PRINTABLE(c) ((c) >= 64 && (c) < 255)
170    #else
171    #define PRINTABLE(c) ((c) >= 32 && (c) < 127)
172    #endif
173    
174  #define PRINTHEX(c) (locale_set? isprint(c) : PRINTABLE(c))  #define PRINTOK(c) (locale_set? isprint(c) : PRINTABLE(c))
175    
176    /* Posix support is disabled in 16 or 32 bit only mode. */
177    #if !defined SUPPORT_PCRE8 && !defined NOPOSIX
178    #define NOPOSIX
179    #endif
180    
181  /* It is possible to compile this test program without including support for  /* It is possible to compile this test program without including support for
182  testing the POSIX interface, though this is not available via the standard  testing the POSIX interface, though this is not available via the standard
# Line 122  Makefile. */ Line 186  Makefile. */
186  #include "pcreposix.h"  #include "pcreposix.h"
187  #endif  #endif
188    
189  /* It is also possible, for the benefit of the version currently imported into  /* It is also possible, originally for the benefit of a version that was
190  Exim, to build pcretest without support for UTF8 (define NOUTF8), without the  imported into Exim, to build pcretest without support for UTF8 or UTF16 (define
191  interface to the DFA matcher (NODFA), and without the doublecheck of the old  NOUTF), without the interface to the DFA matcher (NODFA). In fact, we
192  "info" function (define NOINFOCHECK). In fact, we automatically cut out the  automatically cut out the UTF support if PCRE is built without it. */
193  UTF8 support if PCRE is built without it. */  
194    #ifndef SUPPORT_UTF
195  #ifndef SUPPORT_UTF8  #ifndef NOUTF
196  #ifndef NOUTF8  #define NOUTF
197  #define NOUTF8  #endif
198    #endif
199    
200    /* To make the code a bit tidier for 8/16/32-bit support, we define macros
201    for all the pcre[16]_xxx functions (except pcre16_fullinfo, which is called
202    only from one place and is handled differently). I couldn't dream up any way of
203    using a single macro to do this in a generic way, because of the many different
204    argument requirements. We know that at least one of SUPPORT_PCRE8 and
205    SUPPORT_PCRE16 must be set. First define macros for each individual mode; then
206    use these in the definitions of generic macros.
207    
208    **** Special note about the PCHARSxxx macros: the address of the string to be
209    printed is always given as two arguments: a base address followed by an offset.
210    The base address is cast to the correct data size for 8 or 16 bit data; the
211    offset is in units of this size. If the string were given as base+offset in one
212    argument, the casting might be incorrectly applied. */
213    
214    #ifdef SUPPORT_PCRE8
215    
216    #define PCHARS8(lv, p, offset, len, f) \
217      lv = pchars((pcre_uint8 *)(p) + offset, len, f)
218    
219    #define PCHARSV8(p, offset, len, f) \
220      (void)pchars((pcre_uint8 *)(p) + offset, len, f)
221    
222    #define READ_CAPTURE_NAME8(p, cn8, cn16, cn32, re) \
223      p = read_capture_name8(p, cn8, re)
224    
225    #define STRLEN8(p) ((int)strlen((char *)p))
226    
227    #define SET_PCRE_CALLOUT8(callout) \
228      pcre_callout = callout
229    
230    #define PCRE_ASSIGN_JIT_STACK8(extra, callback, userdata) \
231       pcre_assign_jit_stack(extra, callback, userdata)
232    
233    #define PCRE_COMPILE8(re, pat, options, error, erroffset, tables) \
234      re = pcre_compile((char *)pat, options, error, erroffset, tables)
235    
236    #define PCRE_COPY_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \
237        namesptr, cbuffer, size) \
238      rc = pcre_copy_named_substring(re, (char *)bptr, offsets, count, \
239        (char *)namesptr, cbuffer, size)
240    
241    #define PCRE_COPY_SUBSTRING8(rc, bptr, offsets, count, i, cbuffer, size) \
242      rc = pcre_copy_substring((char *)bptr, offsets, count, i, cbuffer, size)
243    
244    #define PCRE_DFA_EXEC8(count, re, extra, bptr, len, start_offset, options, \
245        offsets, size_offsets, workspace, size_workspace) \
246      count = pcre_dfa_exec(re, extra, (char *)bptr, len, start_offset, options, \
247        offsets, size_offsets, workspace, size_workspace)
248    
249    #define PCRE_EXEC8(count, re, extra, bptr, len, start_offset, options, \
250        offsets, size_offsets) \
251      count = pcre_exec(re, extra, (char *)bptr, len, start_offset, options, \
252        offsets, size_offsets)
253    
254    #define PCRE_FREE_STUDY8(extra) \
255      pcre_free_study(extra)
256    
257    #define PCRE_FREE_SUBSTRING8(substring) \
258      pcre_free_substring(substring)
259    
260    #define PCRE_FREE_SUBSTRING_LIST8(listptr) \
261      pcre_free_substring_list(listptr)
262    
263    #define PCRE_GET_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \
264        getnamesptr, subsptr) \
265      rc = pcre_get_named_substring(re, (char *)bptr, offsets, count, \
266        (char *)getnamesptr, subsptr)
267    
268    #define PCRE_GET_STRINGNUMBER8(n, rc, ptr) \
269      n = pcre_get_stringnumber(re, (char *)ptr)
270    
271    #define PCRE_GET_SUBSTRING8(rc, bptr, offsets, count, i, subsptr) \
272      rc = pcre_get_substring((char *)bptr, offsets, count, i, subsptr)
273    
274    #define PCRE_GET_SUBSTRING_LIST8(rc, bptr, offsets, count, listptr) \
275      rc = pcre_get_substring_list((const char *)bptr, offsets, count, listptr)
276    
277    #define PCRE_PATTERN_TO_HOST_BYTE_ORDER8(rc, re, extra, tables) \
278      rc = pcre_pattern_to_host_byte_order(re, extra, tables)
279    
280    #define PCRE_PRINTINT8(re, outfile, debug_lengths) \
281      pcre_printint(re, outfile, debug_lengths)
282    
283    #define PCRE_STUDY8(extra, re, options, error) \
284      extra = pcre_study(re, options, error)
285    
286    #define PCRE_JIT_STACK_ALLOC8(startsize, maxsize) \
287      pcre_jit_stack_alloc(startsize, maxsize)
288    
289    #define PCRE_JIT_STACK_FREE8(stack) \
290      pcre_jit_stack_free(stack)
291    
292    #define pcre8_maketables pcre_maketables
293    
294    #endif /* SUPPORT_PCRE8 */
295    
296    /* -----------------------------------------------------------*/
297    
298    #ifdef SUPPORT_PCRE16
299    
300    #define PCHARS16(lv, p, offset, len, f) \
301      lv = pchars16((PCRE_SPTR16)(p) + offset, len, f)
302    
303    #define PCHARSV16(p, offset, len, f) \
304      (void)pchars16((PCRE_SPTR16)(p) + offset, len, f)
305    
306    #define READ_CAPTURE_NAME16(p, cn8, cn16, cn32, re) \
307      p = read_capture_name16(p, cn16, re)
308    
309    #define STRLEN16(p) ((int)strlen16((PCRE_SPTR16)p))
310    
311    #define SET_PCRE_CALLOUT16(callout) \
312      pcre16_callout = (int (*)(pcre16_callout_block *))callout
313    
314    #define PCRE_ASSIGN_JIT_STACK16(extra, callback, userdata) \
315      pcre16_assign_jit_stack((pcre16_extra *)extra, \
316        (pcre16_jit_callback)callback, userdata)
317    
318    #define PCRE_COMPILE16(re, pat, options, error, erroffset, tables) \
319      re = (pcre *)pcre16_compile((PCRE_SPTR16)pat, options, error, erroffset, \
320        tables)
321    
322    #define PCRE_COPY_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \
323        namesptr, cbuffer, size) \
324      rc = pcre16_copy_named_substring((pcre16 *)re, (PCRE_SPTR16)bptr, offsets, \
325        count, (PCRE_SPTR16)namesptr, (PCRE_UCHAR16 *)cbuffer, size/2)
326    
327    #define PCRE_COPY_SUBSTRING16(rc, bptr, offsets, count, i, cbuffer, size) \
328      rc = pcre16_copy_substring((PCRE_SPTR16)bptr, offsets, count, i, \
329        (PCRE_UCHAR16 *)cbuffer, size/2)
330    
331    #define PCRE_DFA_EXEC16(count, re, extra, bptr, len, start_offset, options, \
332        offsets, size_offsets, workspace, size_workspace) \
333      count = pcre16_dfa_exec((pcre16 *)re, (pcre16_extra *)extra, \
334        (PCRE_SPTR16)bptr, len, start_offset, options, offsets, size_offsets, \
335        workspace, size_workspace)
336    
337    #define PCRE_EXEC16(count, re, extra, bptr, len, start_offset, options, \
338        offsets, size_offsets) \
339      count = pcre16_exec((pcre16 *)re, (pcre16_extra *)extra, (PCRE_SPTR16)bptr, \
340        len, start_offset, options, offsets, size_offsets)
341    
342    #define PCRE_FREE_STUDY16(extra) \
343      pcre16_free_study((pcre16_extra *)extra)
344    
345    #define PCRE_FREE_SUBSTRING16(substring) \
346      pcre16_free_substring((PCRE_SPTR16)substring)
347    
348    #define PCRE_FREE_SUBSTRING_LIST16(listptr) \
349      pcre16_free_substring_list((PCRE_SPTR16 *)listptr)
350    
351    #define PCRE_GET_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \
352        getnamesptr, subsptr) \
353      rc = pcre16_get_named_substring((pcre16 *)re, (PCRE_SPTR16)bptr, offsets, \
354        count, (PCRE_SPTR16)getnamesptr, (PCRE_SPTR16 *)(void*)subsptr)
355    
356    #define PCRE_GET_STRINGNUMBER16(n, rc, ptr) \
357      n = pcre16_get_stringnumber(re, (PCRE_SPTR16)ptr)
358    
359    #define PCRE_GET_SUBSTRING16(rc, bptr, offsets, count, i, subsptr) \
360      rc = pcre16_get_substring((PCRE_SPTR16)bptr, offsets, count, i, \
361        (PCRE_SPTR16 *)(void*)subsptr)
362    
363    #define PCRE_GET_SUBSTRING_LIST16(rc, bptr, offsets, count, listptr) \
364      rc = pcre16_get_substring_list((PCRE_SPTR16)bptr, offsets, count, \
365        (PCRE_SPTR16 **)(void*)listptr)
366    
367    #define PCRE_PATTERN_TO_HOST_BYTE_ORDER16(rc, re, extra, tables) \
368      rc = pcre16_pattern_to_host_byte_order((pcre16 *)re, (pcre16_extra *)extra, \
369        tables)
370    
371    #define PCRE_PRINTINT16(re, outfile, debug_lengths) \
372      pcre16_printint(re, outfile, debug_lengths)
373    
374    #define PCRE_STUDY16(extra, re, options, error) \
375      extra = (pcre_extra *)pcre16_study((pcre16 *)re, options, error)
376    
377    #define PCRE_JIT_STACK_ALLOC16(startsize, maxsize) \
378      (pcre_jit_stack *)pcre16_jit_stack_alloc(startsize, maxsize)
379    
380    #define PCRE_JIT_STACK_FREE16(stack) \
381      pcre16_jit_stack_free((pcre16_jit_stack *)stack)
382    
383    #endif /* SUPPORT_PCRE16 */
384    
385    /* -----------------------------------------------------------*/
386    
387    #ifdef SUPPORT_PCRE32
388    
389    #define PCHARS32(lv, p, offset, len, f) \
390      lv = pchars32((PCRE_SPTR32)(p) + offset, len, use_utf, f)
391    
392    #define PCHARSV32(p, offset, len, f)                \
393      (void)pchars32((PCRE_SPTR32)(p) + offset, len, use_utf, f)
394    
395    #define READ_CAPTURE_NAME32(p, cn8, cn16, cn32, re) \
396      p = read_capture_name32(p, cn32, re)
397    
398    #define STRLEN32(p) ((int)strlen32((PCRE_SPTR32)p))
399    
400    #define SET_PCRE_CALLOUT32(callout) \
401      pcre32_callout = (int (*)(pcre32_callout_block *))callout
402    
403    #define PCRE_ASSIGN_JIT_STACK32(extra, callback, userdata) \
404      pcre32_assign_jit_stack((pcre32_extra *)extra, \
405        (pcre32_jit_callback)callback, userdata)
406    
407    #define PCRE_COMPILE32(re, pat, options, error, erroffset, tables) \
408      re = (pcre *)pcre32_compile((PCRE_SPTR32)pat, options, error, erroffset, \
409        tables)
410    
411    #define PCRE_COPY_NAMED_SUBSTRING32(rc, re, bptr, offsets, count, \
412        namesptr, cbuffer, size) \
413      rc = pcre32_copy_named_substring((pcre32 *)re, (PCRE_SPTR32)bptr, offsets, \
414        count, (PCRE_SPTR32)namesptr, (PCRE_UCHAR32 *)cbuffer, size/2)
415    
416    #define PCRE_COPY_SUBSTRING32(rc, bptr, offsets, count, i, cbuffer, size) \
417      rc = pcre32_copy_substring((PCRE_SPTR32)bptr, offsets, count, i, \
418        (PCRE_UCHAR32 *)cbuffer, size/2)
419    
420    #define PCRE_DFA_EXEC32(count, re, extra, bptr, len, start_offset, options, \
421        offsets, size_offsets, workspace, size_workspace) \
422      count = pcre32_dfa_exec((pcre32 *)re, (pcre32_extra *)extra, \
423        (PCRE_SPTR32)bptr, len, start_offset, options, offsets, size_offsets, \
424        workspace, size_workspace)
425    
426    #define PCRE_EXEC32(count, re, extra, bptr, len, start_offset, options, \
427        offsets, size_offsets) \
428      count = pcre32_exec((pcre32 *)re, (pcre32_extra *)extra, (PCRE_SPTR32)bptr, \
429        len, start_offset, options, offsets, size_offsets)
430    
431    #define PCRE_FREE_STUDY32(extra) \
432      pcre32_free_study((pcre32_extra *)extra)
433    
434    #define PCRE_FREE_SUBSTRING32(substring) \
435      pcre32_free_substring((PCRE_SPTR32)substring)
436    
437    #define PCRE_FREE_SUBSTRING_LIST32(listptr) \
438      pcre32_free_substring_list((PCRE_SPTR32 *)listptr)
439    
440    #define PCRE_GET_NAMED_SUBSTRING32(rc, re, bptr, offsets, count, \
441        getnamesptr, subsptr) \
442      rc = pcre32_get_named_substring((pcre32 *)re, (PCRE_SPTR32)bptr, offsets, \
443        count, (PCRE_SPTR32)getnamesptr, (PCRE_SPTR32 *)(void*)subsptr)
444    
445    #define PCRE_GET_STRINGNUMBER32(n, rc, ptr) \
446      n = pcre32_get_stringnumber(re, (PCRE_SPTR32)ptr)
447    
448    #define PCRE_GET_SUBSTRING32(rc, bptr, offsets, count, i, subsptr) \
449      rc = pcre32_get_substring((PCRE_SPTR32)bptr, offsets, count, i, \
450        (PCRE_SPTR32 *)(void*)subsptr)
451    
452    #define PCRE_GET_SUBSTRING_LIST32(rc, bptr, offsets, count, listptr) \
453      rc = pcre32_get_substring_list((PCRE_SPTR32)bptr, offsets, count, \
454        (PCRE_SPTR32 **)(void*)listptr)
455    
456    #define PCRE_PATTERN_TO_HOST_BYTE_ORDER32(rc, re, extra, tables) \
457      rc = pcre32_pattern_to_host_byte_order((pcre32 *)re, (pcre32_extra *)extra, \
458        tables)
459    
460    #define PCRE_PRINTINT32(re, outfile, debug_lengths) \
461      pcre32_printint(re, outfile, debug_lengths)
462    
463    #define PCRE_STUDY32(extra, re, options, error) \
464      extra = (pcre_extra *)pcre32_study((pcre32 *)re, options, error)
465    
466    #define PCRE_JIT_STACK_ALLOC32(startsize, maxsize) \
467      (pcre_jit_stack *)pcre32_jit_stack_alloc(startsize, maxsize)
468    
469    #define PCRE_JIT_STACK_FREE32(stack) \
470      pcre32_jit_stack_free((pcre32_jit_stack *)stack)
471    
472    #endif /* SUPPORT_PCRE32 */
473    
474    
475    /* ----- More than one mode is supported; a runtime test is needed, except for
476    pcre_config(), and the JIT stack functions, when it doesn't matter which
477    available version is called. ----- */
478    
479    enum {
480      PCRE8_MODE,
481      PCRE16_MODE,
482      PCRE32_MODE
483    };
484    
485    #if (defined (SUPPORT_PCRE8) + defined (SUPPORT_PCRE16) + \
486         defined (SUPPORT_PCRE32)) >= 2
487    
488    #define CHAR_SIZE (1 << pcre_mode)
489    
490    /* There doesn't seem to be an easy way of writing these macros that can cope
491    with the 3 pairs of bit sizes plus all three bit sizes. So just handle all the
492    cases separately. */
493    
494    /* ----- All three modes supported ----- */
495    
496    #if defined(SUPPORT_PCRE8) && defined(SUPPORT_PCRE16) && defined(SUPPORT_PCRE32)
497    
498    #define PCHARS(lv, p, offset, len, f) \
499      if (pcre_mode == PCRE32_MODE) \
500        PCHARS32(lv, p, offset, len, f); \
501      else if (pcre_mode == PCRE16_MODE) \
502        PCHARS16(lv, p, offset, len, f); \
503      else \
504        PCHARS8(lv, p, offset, len, f)
505    
506    #define PCHARSV(p, offset, len, f) \
507      if (pcre_mode == PCRE32_MODE) \
508        PCHARSV32(p, offset, len, f); \
509      else if (pcre_mode == PCRE16_MODE) \
510        PCHARSV16(p, offset, len, f); \
511      else \
512        PCHARSV8(p, offset, len, f)
513    
514    #define READ_CAPTURE_NAME(p, cn8, cn16, cn32, re) \
515      if (pcre_mode == PCRE32_MODE) \
516        READ_CAPTURE_NAME32(p, cn8, cn16, cn32, re); \
517      else if (pcre_mode == PCRE16_MODE) \
518        READ_CAPTURE_NAME16(p, cn8, cn16, cn32, re); \
519      else \
520        READ_CAPTURE_NAME8(p, cn8, cn16, cn32, re)
521    
522    #define SET_PCRE_CALLOUT(callout) \
523      if (pcre_mode == PCRE32_MODE) \
524        SET_PCRE_CALLOUT32(callout); \
525      else if (pcre_mode == PCRE16_MODE) \
526        SET_PCRE_CALLOUT16(callout); \
527      else \
528        SET_PCRE_CALLOUT8(callout)
529    
530    #define STRLEN(p) (pcre_mode == PCRE32_MODE ? STRLEN32(p) : pcre_mode == PCRE16_MODE ? STRLEN16(p) : STRLEN8(p))
531    
532    #define PCRE_ASSIGN_JIT_STACK(extra, callback, userdata) \
533      if (pcre_mode == PCRE32_MODE) \
534        PCRE_ASSIGN_JIT_STACK32(extra, callback, userdata); \
535      else if (pcre_mode == PCRE16_MODE) \
536        PCRE_ASSIGN_JIT_STACK16(extra, callback, userdata); \
537      else \
538        PCRE_ASSIGN_JIT_STACK8(extra, callback, userdata)
539    
540    #define PCRE_COMPILE(re, pat, options, error, erroffset, tables) \
541      if (pcre_mode == PCRE32_MODE) \
542        PCRE_COMPILE32(re, pat, options, error, erroffset, tables); \
543      else if (pcre_mode == PCRE16_MODE) \
544        PCRE_COMPILE16(re, pat, options, error, erroffset, tables); \
545      else \
546        PCRE_COMPILE8(re, pat, options, error, erroffset, tables)
547    
548    #define PCRE_CONFIG pcre_config
549    
550    #define PCRE_COPY_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \
551        namesptr, cbuffer, size) \
552      if (pcre_mode == PCRE32_MODE) \
553        PCRE_COPY_NAMED_SUBSTRING32(rc, re, bptr, offsets, count, \
554          namesptr, cbuffer, size); \
555      else if (pcre_mode == PCRE16_MODE) \
556        PCRE_COPY_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \
557          namesptr, cbuffer, size); \
558      else \
559        PCRE_COPY_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \
560          namesptr, cbuffer, size)
561    
562    #define PCRE_COPY_SUBSTRING(rc, bptr, offsets, count, i, cbuffer, size) \
563      if (pcre_mode == PCRE32_MODE) \
564        PCRE_COPY_SUBSTRING32(rc, bptr, offsets, count, i, cbuffer, size); \
565      else if (pcre_mode == PCRE16_MODE) \
566        PCRE_COPY_SUBSTRING16(rc, bptr, offsets, count, i, cbuffer, size); \
567      else \
568        PCRE_COPY_SUBSTRING8(rc, bptr, offsets, count, i, cbuffer, size)
569    
570    #define PCRE_DFA_EXEC(count, re, extra, bptr, len, start_offset, options, \
571        offsets, size_offsets, workspace, size_workspace) \
572      if (pcre_mode == PCRE32_MODE) \
573        PCRE_DFA_EXEC32(count, re, extra, bptr, len, start_offset, options, \
574          offsets, size_offsets, workspace, size_workspace); \
575      else if (pcre_mode == PCRE16_MODE) \
576        PCRE_DFA_EXEC16(count, re, extra, bptr, len, start_offset, options, \
577          offsets, size_offsets, workspace, size_workspace); \
578      else \
579        PCRE_DFA_EXEC8(count, re, extra, bptr, len, start_offset, options, \
580          offsets, size_offsets, workspace, size_workspace)
581    
582    #define PCRE_EXEC(count, re, extra, bptr, len, start_offset, options, \
583        offsets, size_offsets) \
584      if (pcre_mode == PCRE32_MODE) \
585        PCRE_EXEC32(count, re, extra, bptr, len, start_offset, options, \
586          offsets, size_offsets); \
587      else if (pcre_mode == PCRE16_MODE) \
588        PCRE_EXEC16(count, re, extra, bptr, len, start_offset, options, \
589          offsets, size_offsets); \
590      else \
591        PCRE_EXEC8(count, re, extra, bptr, len, start_offset, options, \
592          offsets, size_offsets)
593    
594    #define PCRE_FREE_STUDY(extra) \
595      if (pcre_mode == PCRE32_MODE) \
596        PCRE_FREE_STUDY32(extra); \
597      else if (pcre_mode == PCRE16_MODE) \
598        PCRE_FREE_STUDY16(extra); \
599      else \
600        PCRE_FREE_STUDY8(extra)
601    
602    #define PCRE_FREE_SUBSTRING(substring) \
603      if (pcre_mode == PCRE32_MODE) \
604        PCRE_FREE_SUBSTRING32(substring); \
605      else if (pcre_mode == PCRE16_MODE) \
606        PCRE_FREE_SUBSTRING16(substring); \
607      else \
608        PCRE_FREE_SUBSTRING8(substring)
609    
610    #define PCRE_FREE_SUBSTRING_LIST(listptr) \
611      if (pcre_mode == PCRE32_MODE) \
612        PCRE_FREE_SUBSTRING_LIST32(listptr); \
613      else if (pcre_mode == PCRE16_MODE) \
614        PCRE_FREE_SUBSTRING_LIST16(listptr); \
615      else \
616        PCRE_FREE_SUBSTRING_LIST8(listptr)
617    
618    #define PCRE_GET_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \
619        getnamesptr, subsptr) \
620      if (pcre_mode == PCRE32_MODE) \
621        PCRE_GET_NAMED_SUBSTRING32(rc, re, bptr, offsets, count, \
622          getnamesptr, subsptr); \
623      else if (pcre_mode == PCRE16_MODE) \
624        PCRE_GET_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \
625          getnamesptr, subsptr); \
626      else \
627        PCRE_GET_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \
628          getnamesptr, subsptr)
629    
630    #define PCRE_GET_STRINGNUMBER(n, rc, ptr) \
631      if (pcre_mode == PCRE32_MODE) \
632        PCRE_GET_STRINGNUMBER32(n, rc, ptr); \
633      else if (pcre_mode == PCRE16_MODE) \
634        PCRE_GET_STRINGNUMBER16(n, rc, ptr); \
635      else \
636        PCRE_GET_STRINGNUMBER8(n, rc, ptr)
637    
638    #define PCRE_GET_SUBSTRING(rc, bptr, use_offsets, count, i, subsptr) \
639      if (pcre_mode == PCRE32_MODE) \
640        PCRE_GET_SUBSTRING32(rc, bptr, use_offsets, count, i, subsptr); \
641      else if (pcre_mode == PCRE16_MODE) \
642        PCRE_GET_SUBSTRING16(rc, bptr, use_offsets, count, i, subsptr); \
643      else \
644        PCRE_GET_SUBSTRING8(rc, bptr, use_offsets, count, i, subsptr)
645    
646    #define PCRE_GET_SUBSTRING_LIST(rc, bptr, offsets, count, listptr) \
647      if (pcre_mode == PCRE32_MODE) \
648        PCRE_GET_SUBSTRING_LIST32(rc, bptr, offsets, count, listptr); \
649      else if (pcre_mode == PCRE16_MODE) \
650        PCRE_GET_SUBSTRING_LIST16(rc, bptr, offsets, count, listptr); \
651      else \
652        PCRE_GET_SUBSTRING_LIST8(rc, bptr, offsets, count, listptr)
653    
654    #define PCRE_JIT_STACK_ALLOC(startsize, maxsize) \
655      (pcre_mode == PCRE32_MODE ? \
656         PCRE_JIT_STACK_ALLOC32(startsize, maxsize) \
657        : pcre_mode == PCRE16_MODE ? \
658          PCRE_JIT_STACK_ALLOC16(startsize, maxsize) \
659          : PCRE_JIT_STACK_ALLOC8(startsize, maxsize))
660    
661    #define PCRE_JIT_STACK_FREE(stack) \
662      if (pcre_mode == PCRE32_MODE) \
663        PCRE_JIT_STACK_FREE32(stack); \
664      else if (pcre_mode == PCRE16_MODE) \
665        PCRE_JIT_STACK_FREE16(stack); \
666      else \
667        PCRE_JIT_STACK_FREE8(stack)
668    
669    #define PCRE_MAKETABLES \
670      (pcre_mode == PCRE32_MODE ? pcre32_maketables() : pcre_mode == PCRE16_MODE ? pcre16_maketables() : pcre_maketables())
671    
672    #define PCRE_PATTERN_TO_HOST_BYTE_ORDER(rc, re, extra, tables) \
673      if (pcre_mode == PCRE32_MODE) \
674        PCRE_PATTERN_TO_HOST_BYTE_ORDER32(rc, re, extra, tables); \
675      else if (pcre_mode == PCRE16_MODE) \
676        PCRE_PATTERN_TO_HOST_BYTE_ORDER16(rc, re, extra, tables); \
677      else \
678        PCRE_PATTERN_TO_HOST_BYTE_ORDER8(rc, re, extra, tables)
679    
680    #define PCRE_PRINTINT(re, outfile, debug_lengths) \
681      if (pcre_mode == PCRE32_MODE) \
682        PCRE_PRINTINT32(re, outfile, debug_lengths); \
683      else if (pcre_mode == PCRE16_MODE) \
684        PCRE_PRINTINT16(re, outfile, debug_lengths); \
685      else \
686        PCRE_PRINTINT8(re, outfile, debug_lengths)
687    
688    #define PCRE_STUDY(extra, re, options, error) \
689      if (pcre_mode == PCRE32_MODE) \
690        PCRE_STUDY32(extra, re, options, error); \
691      else if (pcre_mode == PCRE16_MODE) \
692        PCRE_STUDY16(extra, re, options, error); \
693      else \
694        PCRE_STUDY8(extra, re, options, error)
695    
696    
697    /* ----- Two out of three modes are supported ----- */
698    
699    #else
700    
701    /* We can use some macro trickery to make a single set of definitions work in
702    the three different cases. */
703    
704    /* ----- 32-bit and 16-bit but not 8-bit supported ----- */
705    
706    #if defined(SUPPORT_PCRE32) && defined(SUPPORT_PCRE16)
707    #define BITONE 32
708    #define BITTWO 16
709    
710    /* ----- 32-bit and 8-bit but not 16-bit supported ----- */
711    
712    #elif defined(SUPPORT_PCRE32) && defined(SUPPORT_PCRE8)
713    #define BITONE 32
714    #define BITTWO 8
715    
716    /* ----- 16-bit and 8-bit but not 32-bit supported ----- */
717    
718    #else
719    #define BITONE 16
720    #define BITTWO 8
721  #endif  #endif
722    
723    #define glue(a,b) a##b
724    #define G(a,b) glue(a,b)
725    
726    
727    /* ----- Common macros for two-mode cases ----- */
728    
729    #define PCHARS(lv, p, offset, len, f) \
730      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
731        G(PCHARS,BITONE)(lv, p, offset, len, f); \
732      else \
733        G(PCHARS,BITTWO)(lv, p, offset, len, f)
734    
735    #define PCHARSV(p, offset, len, f) \
736      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
737        G(PCHARSV,BITONE)(p, offset, len, f); \
738      else \
739        G(PCHARSV,BITTWO)(p, offset, len, f)
740    
741    #define READ_CAPTURE_NAME(p, cn8, cn16, cn32, re) \
742      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
743        G(READ_CAPTURE_NAME,BITONE)(p, cn8, cn16, cn32, re); \
744      else \
745        G(READ_CAPTURE_NAME,BITTWO)(p, cn8, cn16, cn32, re)
746    
747    #define SET_PCRE_CALLOUT(callout) \
748      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
749        G(SET_PCRE_CALLOUT,BITONE)(callout); \
750      else \
751        G(SET_PCRE_CALLOUT,BITTWO)(callout)
752    
753    #define STRLEN(p) ((pcre_mode == G(G(PCRE,BITONE),_MODE)) ? \
754      G(STRLEN,BITONE)(p) : G(STRLEN,BITTWO)(p))
755    
756    #define PCRE_ASSIGN_JIT_STACK(extra, callback, userdata) \
757      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
758        G(PCRE_ASSIGN_JIT_STACK,BITONE)(extra, callback, userdata); \
759      else \
760        G(PCRE_ASSIGN_JIT_STACK,BITTWO)(extra, callback, userdata)
761    
762    #define PCRE_COMPILE(re, pat, options, error, erroffset, tables) \
763      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
764        G(PCRE_COMPILE,BITONE)(re, pat, options, error, erroffset, tables); \
765      else \
766        G(PCRE_COMPILE,BITTWO)(re, pat, options, error, erroffset, tables)
767    
768    #define PCRE_CONFIG G(G(pcre,BITONE),_config)
769    
770    #define PCRE_COPY_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \
771        namesptr, cbuffer, size) \
772      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
773        G(PCRE_COPY_NAMED_SUBSTRING,BITONE)(rc, re, bptr, offsets, count, \
774          namesptr, cbuffer, size); \
775      else \
776        G(PCRE_COPY_NAMED_SUBSTRING,BITTWO)(rc, re, bptr, offsets, count, \
777          namesptr, cbuffer, size)
778    
779    #define PCRE_COPY_SUBSTRING(rc, bptr, offsets, count, i, cbuffer, size) \
780      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
781        G(PCRE_COPY_SUBSTRING,BITONE)(rc, bptr, offsets, count, i, cbuffer, size); \
782      else \
783        G(PCRE_COPY_SUBSTRING,BITTWO)(rc, bptr, offsets, count, i, cbuffer, size)
784    
785    #define PCRE_DFA_EXEC(count, re, extra, bptr, len, start_offset, options, \
786        offsets, size_offsets, workspace, size_workspace) \
787      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
788        G(PCRE_DFA_EXEC,BITONE)(count, re, extra, bptr, len, start_offset, options, \
789          offsets, size_offsets, workspace, size_workspace); \
790      else \
791        G(PCRE_DFA_EXEC,BITTWO)(count, re, extra, bptr, len, start_offset, options, \
792          offsets, size_offsets, workspace, size_workspace)
793    
794    #define PCRE_EXEC(count, re, extra, bptr, len, start_offset, options, \
795        offsets, size_offsets) \
796      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
797        G(PCRE_EXEC,BITONE)(count, re, extra, bptr, len, start_offset, options, \
798          offsets, size_offsets); \
799      else \
800        G(PCRE_EXEC,BITTWO)(count, re, extra, bptr, len, start_offset, options, \
801          offsets, size_offsets)
802    
803    #define PCRE_FREE_STUDY(extra) \
804      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
805        G(PCRE_FREE_STUDY,BITONE)(extra); \
806      else \
807        G(PCRE_FREE_STUDY,BITTWO)(extra)
808    
809    #define PCRE_FREE_SUBSTRING(substring) \
810      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
811        G(PCRE_FREE_SUBSTRING,BITONE)(substring); \
812      else \
813        G(PCRE_FREE_SUBSTRING,BITTWO)(substring)
814    
815    #define PCRE_FREE_SUBSTRING_LIST(listptr) \
816      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
817        G(PCRE_FREE_SUBSTRING_LIST,BITONE)(listptr); \
818      else \
819        G(PCRE_FREE_SUBSTRING_LIST,BITTWO)(listptr)
820    
821    #define PCRE_GET_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \
822        getnamesptr, subsptr) \
823      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
824        G(PCRE_GET_NAMED_SUBSTRING,BITONE)(rc, re, bptr, offsets, count, \
825          getnamesptr, subsptr); \
826      else \
827        G(PCRE_GET_NAMED_SUBSTRING,BITTWO)(rc, re, bptr, offsets, count, \
828          getnamesptr, subsptr)
829    
830    #define PCRE_GET_STRINGNUMBER(n, rc, ptr) \
831      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
832        G(PCRE_GET_STRINGNUMBER,BITONE)(n, rc, ptr); \
833      else \
834        G(PCRE_GET_STRINGNUMBER,BITTWO)(n, rc, ptr)
835    
836    #define PCRE_GET_SUBSTRING(rc, bptr, use_offsets, count, i, subsptr) \
837      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
838        G(PCRE_GET_SUBSTRING,BITONE)(rc, bptr, use_offsets, count, i, subsptr); \
839      else \
840        G(PCRE_GET_SUBSTRING,BITTWO)(rc, bptr, use_offsets, count, i, subsptr)
841    
842    #define PCRE_GET_SUBSTRING_LIST(rc, bptr, offsets, count, listptr) \
843      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
844        G(PCRE_GET_SUBSTRING_LIST,BITONE)(rc, bptr, offsets, count, listptr); \
845      else \
846        G(PCRE_GET_SUBSTRING_LIST,BITTWO)(rc, bptr, offsets, count, listptr)
847    
848    #define PCRE_JIT_STACK_ALLOC(startsize, maxsize) \
849      (pcre_mode == G(G(PCRE,BITONE),_MODE)) ? \
850         G(PCRE_JIT_STACK_ALLOC,BITONE)(startsize, maxsize) \
851        : G(PCRE_JIT_STACK_ALLOC,BITTWO)(startsize, maxsize)
852    
853    #define PCRE_JIT_STACK_FREE(stack) \
854      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
855        G(PCRE_JIT_STACK_FREE,BITONE)(stack); \
856      else \
857        G(PCRE_JIT_STACK_FREE,BITTWO)(stack)
858    
859    #define PCRE_MAKETABLES \
860      (pcre_mode == G(G(PCRE,BITONE),_MODE)) ? \
861        G(G(pcre,BITONE),_maketables)() : G(G(pcre,BITTWO),_maketables)()
862    
863    #define PCRE_PATTERN_TO_HOST_BYTE_ORDER(rc, re, extra, tables) \
864      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
865        G(PCRE_PATTERN_TO_HOST_BYTE_ORDER,BITONE)(rc, re, extra, tables); \
866      else \
867        G(PCRE_PATTERN_TO_HOST_BYTE_ORDER,BITTWO)(rc, re, extra, tables)
868    
869    #define PCRE_PRINTINT(re, outfile, debug_lengths) \
870      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
871        G(PCRE_PRINTINT,BITONE)(re, outfile, debug_lengths); \
872      else \
873        G(PCRE_PRINTINT,BITTWO)(re, outfile, debug_lengths)
874    
875    #define PCRE_STUDY(extra, re, options, error) \
876      if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
877        G(PCRE_STUDY,BITONE)(extra, re, options, error); \
878      else \
879        G(PCRE_STUDY,BITTWO)(extra, re, options, error)
880    
881    #endif  /* Two out of three modes */
882    
883    /* ----- End of cases where more than one mode is supported ----- */
884    
885    
886    /* ----- Only 8-bit mode is supported ----- */
887    
888    #elif defined SUPPORT_PCRE8
889    #define CHAR_SIZE                 1
890    #define PCHARS                    PCHARS8
891    #define PCHARSV                   PCHARSV8
892    #define READ_CAPTURE_NAME         READ_CAPTURE_NAME8
893    #define SET_PCRE_CALLOUT          SET_PCRE_CALLOUT8
894    #define STRLEN                    STRLEN8
895    #define PCRE_ASSIGN_JIT_STACK     PCRE_ASSIGN_JIT_STACK8
896    #define PCRE_COMPILE              PCRE_COMPILE8
897    #define PCRE_CONFIG               pcre_config
898    #define PCRE_COPY_NAMED_SUBSTRING PCRE_COPY_NAMED_SUBSTRING8
899    #define PCRE_COPY_SUBSTRING       PCRE_COPY_SUBSTRING8
900    #define PCRE_DFA_EXEC             PCRE_DFA_EXEC8
901    #define PCRE_EXEC                 PCRE_EXEC8
902    #define PCRE_FREE_STUDY           PCRE_FREE_STUDY8
903    #define PCRE_FREE_SUBSTRING       PCRE_FREE_SUBSTRING8
904    #define PCRE_FREE_SUBSTRING_LIST  PCRE_FREE_SUBSTRING_LIST8
905    #define PCRE_GET_NAMED_SUBSTRING  PCRE_GET_NAMED_SUBSTRING8
906    #define PCRE_GET_STRINGNUMBER     PCRE_GET_STRINGNUMBER8
907    #define PCRE_GET_SUBSTRING        PCRE_GET_SUBSTRING8
908    #define PCRE_GET_SUBSTRING_LIST   PCRE_GET_SUBSTRING_LIST8
909    #define PCRE_JIT_STACK_ALLOC      PCRE_JIT_STACK_ALLOC8
910    #define PCRE_JIT_STACK_FREE       PCRE_JIT_STACK_FREE8
911    #define PCRE_MAKETABLES           pcre_maketables()
912    #define PCRE_PATTERN_TO_HOST_BYTE_ORDER PCRE_PATTERN_TO_HOST_BYTE_ORDER8
913    #define PCRE_PRINTINT             PCRE_PRINTINT8
914    #define PCRE_STUDY                PCRE_STUDY8
915    
916    /* ----- Only 16-bit mode is supported ----- */
917    
918    #elif defined SUPPORT_PCRE16
919    #define CHAR_SIZE                 2
920    #define PCHARS                    PCHARS16
921    #define PCHARSV                   PCHARSV16
922    #define READ_CAPTURE_NAME         READ_CAPTURE_NAME16
923    #define SET_PCRE_CALLOUT          SET_PCRE_CALLOUT16
924    #define STRLEN                    STRLEN16
925    #define PCRE_ASSIGN_JIT_STACK     PCRE_ASSIGN_JIT_STACK16
926    #define PCRE_COMPILE              PCRE_COMPILE16
927    #define PCRE_CONFIG               pcre16_config
928    #define PCRE_COPY_NAMED_SUBSTRING PCRE_COPY_NAMED_SUBSTRING16
929    #define PCRE_COPY_SUBSTRING       PCRE_COPY_SUBSTRING16
930    #define PCRE_DFA_EXEC             PCRE_DFA_EXEC16
931    #define PCRE_EXEC                 PCRE_EXEC16
932    #define PCRE_FREE_STUDY           PCRE_FREE_STUDY16
933    #define PCRE_FREE_SUBSTRING       PCRE_FREE_SUBSTRING16
934    #define PCRE_FREE_SUBSTRING_LIST  PCRE_FREE_SUBSTRING_LIST16
935    #define PCRE_GET_NAMED_SUBSTRING  PCRE_GET_NAMED_SUBSTRING16
936    #define PCRE_GET_STRINGNUMBER     PCRE_GET_STRINGNUMBER16
937    #define PCRE_GET_SUBSTRING        PCRE_GET_SUBSTRING16
938    #define PCRE_GET_SUBSTRING_LIST   PCRE_GET_SUBSTRING_LIST16
939    #define PCRE_JIT_STACK_ALLOC      PCRE_JIT_STACK_ALLOC16
940    #define PCRE_JIT_STACK_FREE       PCRE_JIT_STACK_FREE16
941    #define PCRE_MAKETABLES           pcre16_maketables()
942    #define PCRE_PATTERN_TO_HOST_BYTE_ORDER PCRE_PATTERN_TO_HOST_BYTE_ORDER16
943    #define PCRE_PRINTINT             PCRE_PRINTINT16
944    #define PCRE_STUDY                PCRE_STUDY16
945    
946    /* ----- Only 32-bit mode is supported ----- */
947    
948    #elif defined SUPPORT_PCRE32
949    #define CHAR_SIZE                 4
950    #define PCHARS                    PCHARS32
951    #define PCHARSV                   PCHARSV32
952    #define READ_CAPTURE_NAME         READ_CAPTURE_NAME32
953    #define SET_PCRE_CALLOUT          SET_PCRE_CALLOUT32
954    #define STRLEN                    STRLEN32
955    #define PCRE_ASSIGN_JIT_STACK     PCRE_ASSIGN_JIT_STACK32
956    #define PCRE_COMPILE              PCRE_COMPILE32
957    #define PCRE_CONFIG               pcre32_config
958    #define PCRE_COPY_NAMED_SUBSTRING PCRE_COPY_NAMED_SUBSTRING32
959    #define PCRE_COPY_SUBSTRING       PCRE_COPY_SUBSTRING32
960    #define PCRE_DFA_EXEC             PCRE_DFA_EXEC32
961    #define PCRE_EXEC                 PCRE_EXEC32
962    #define PCRE_FREE_STUDY           PCRE_FREE_STUDY32
963    #define PCRE_FREE_SUBSTRING       PCRE_FREE_SUBSTRING32
964    #define PCRE_FREE_SUBSTRING_LIST  PCRE_FREE_SUBSTRING_LIST32
965    #define PCRE_GET_NAMED_SUBSTRING  PCRE_GET_NAMED_SUBSTRING32
966    #define PCRE_GET_STRINGNUMBER     PCRE_GET_STRINGNUMBER32
967    #define PCRE_GET_SUBSTRING        PCRE_GET_SUBSTRING32
968    #define PCRE_GET_SUBSTRING_LIST   PCRE_GET_SUBSTRING_LIST32
969    #define PCRE_JIT_STACK_ALLOC      PCRE_JIT_STACK_ALLOC32
970    #define PCRE_JIT_STACK_FREE       PCRE_JIT_STACK_FREE32
971    #define PCRE_MAKETABLES           pcre32_maketables()
972    #define PCRE_PATTERN_TO_HOST_BYTE_ORDER PCRE_PATTERN_TO_HOST_BYTE_ORDER32
973    #define PCRE_PRINTINT             PCRE_PRINTINT32
974    #define PCRE_STUDY                PCRE_STUDY32
975    
976  #endif  #endif
977    
978    /* ----- End of mode-specific function call macros ----- */
979    
980    
981  /* Other parameters */  /* Other parameters */
982    
# Line 145  UTF8 support if PCRE is built without it Line 988  UTF8 support if PCRE is built without it
988  #endif  #endif
989  #endif  #endif
990    
991    #if !defined NODFA
992    #define DFA_WS_DIMENSION 1000
993    #endif
994    
995  /* This is the default loop count for timing. */  /* This is the default loop count for timing. */
996    
997  #define LOOPREPEAT 500000  #define LOOPREPEAT 500000
# Line 159  static int callout_fail_count; Line 1006  static int callout_fail_count;
1006  static int callout_fail_id;  static int callout_fail_id;
1007  static int debug_lengths;  static int debug_lengths;
1008  static int first_callout;  static int first_callout;
1009    static int jit_was_used;
1010  static int locale_set = 0;  static int locale_set = 0;
1011  static int show_malloc;  static int show_malloc;
1012  static int use_utf8;  static int use_utf;
1013  static size_t gotten_store;  static size_t gotten_store;
1014    static size_t first_gotten_store = 0;
1015    static const unsigned char *last_callout_mark = NULL;
1016    
1017  /* The buffers grow automatically if very long input lines are encountered. */  /* The buffers grow automatically if very long input lines are encountered. */
1018    
1019  static int buffer_size = 50000;  static int buffer_size = 50000;
1020  static uschar *buffer = NULL;  static pcre_uint8 *buffer = NULL;
1021  static uschar *dbuffer = NULL;  static pcre_uint8 *pbuffer = NULL;
 static uschar *pbuffer = NULL;  
   
1022    
1023    /* Just as a safety check, make sure that COMPILE_PCRE[16|32] are *not* set. */
1024    
1025  /*************************************************  #ifdef COMPILE_PCRE16
1026  *        Read or extend an input line            *  #error COMPILE_PCRE16 must not be set when compiling pcretest.c
1027  *************************************************/  #endif
1028    
1029  /* Input lines are read into buffer, but both patterns and data lines can be  #ifdef COMPILE_PCRE32
1030  continued over multiple input lines. In addition, if the buffer fills up, we  #error COMPILE_PCRE32 must not be set when compiling pcretest.c
1031  want to automatically expand it so as to be able to handle extremely large  #endif
 lines that are needed for certain stress tests. When the input buffer is  
 expanded, the other two buffers must also be expanded likewise, and the  
 contents of pbuffer, which are a copy of the input for callouts, must be  
 preserved (for when expansion happens for a data line). This is not the most  
 optimal way of handling this, but hey, this is just a test program!  
1032    
1033  Arguments:  /* We need buffers for building 16/32-bit strings, and the tables of operator
1034    f            the file to read  lengths that are used for 16/32-bit compiling, in order to swap bytes in a
1035    start        where in buffer to start (this *must* be within buffer)  pattern for saving/reloading testing. Luckily, the data for these tables is
1036    defined as a macro. However, we must ensure that LINK_SIZE and IMM2_SIZE (which
1037    are used in the tables) are adjusted appropriately for the 16/32-bit world.
1038    LINK_SIZE is also used later in this program. */
1039    
1040    #ifdef SUPPORT_PCRE16
1041    #undef IMM2_SIZE
1042    #define IMM2_SIZE 1
1043    
1044    #if LINK_SIZE == 2
1045    #undef LINK_SIZE
1046    #define LINK_SIZE 1
1047    #elif LINK_SIZE == 3 || LINK_SIZE == 4
1048    #undef LINK_SIZE
1049    #define LINK_SIZE 2
1050    #else
1051    #error LINK_SIZE must be either 2, 3, or 4
1052    #endif
1053    
1054  Returns:       pointer to the start of new data  static int buffer16_size = 0;
1055                 could be a copy of start, or could be moved  static pcre_uint16 *buffer16 = NULL;
1056                 NULL if no data read and EOF reached  static const pcre_uint16 OP_lengths16[] = { OP_LENGTHS };
1057  */  #endif  /* SUPPORT_PCRE16 */
1058    
1059    #ifdef SUPPORT_PCRE32
1060    #undef IMM2_SIZE
1061    #define IMM2_SIZE 1
1062    #undef LINK_SIZE
1063    #define LINK_SIZE 1
1064    
1065    static int buffer32_size = 0;
1066    static pcre_uint32 *buffer32 = NULL;
1067    static const pcre_uint32 OP_lengths32[] = { OP_LENGTHS };
1068    #endif  /* SUPPORT_PCRE32 */
1069    
1070    /* If we have 8-bit support, default to it; if there is also 16-or 32-bit
1071    support, it can be changed by an option. If there is no 8-bit support, there
1072    must be 16-or 32-bit support, so default it to 1. */
1073    
1074    #if defined SUPPORT_PCRE8
1075    static int pcre_mode = PCRE8_MODE;
1076    #elif defined SUPPORT_PCRE16
1077    static int pcre_mode = PCRE16_MODE;
1078    #elif defined SUPPORT_PCRE32
1079    static int pcre_mode = PCRE32_MODE;
1080    #endif
1081    
1082  static uschar *  /* JIT study options for -s+n and /S+n where '1' <= n <= '7'. */
 extend_inputline(FILE *f, uschar *start)  
 {  
 uschar *here = start;  
1083    
1084  for (;;)  static int jit_study_bits[] =
1085    {    {
1086    int rlen = buffer_size - (here - buffer);    PCRE_STUDY_JIT_COMPILE,
1087      PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE,
1088    if (rlen > 1000)    PCRE_STUDY_JIT_COMPILE + PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE,
1089      {    PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE,
1090      int dlen;    PCRE_STUDY_JIT_COMPILE + PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE,
1091      if (fgets((char *)here, rlen,  f) == NULL)    PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE + PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE,
1092        return (here == start)? NULL : start;    PCRE_STUDY_JIT_COMPILE + PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE +
1093      dlen = (int)strlen((char *)here);      PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE
1094      if (dlen > 0 && here[dlen - 1] == '\n') return start;  };
1095      here += dlen;  
1096      }  #define PCRE_STUDY_ALLJIT (PCRE_STUDY_JIT_COMPILE | \
1097      PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE | PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE)
1098    else  
1099      {  /* Textual explanations for runtime error codes */
1100      int new_buffer_size = 2*buffer_size;  
1101      uschar *new_buffer = (unsigned char *)malloc(new_buffer_size);  static const char *errtexts[] = {
1102      uschar *new_dbuffer = (unsigned char *)malloc(new_buffer_size);    NULL,  /* 0 is no error */
1103      uschar *new_pbuffer = (unsigned char *)malloc(new_buffer_size);    NULL,  /* NOMATCH is handled specially */
1104      "NULL argument passed",
1105      "bad option value",
1106      "magic number missing",
1107      "unknown opcode - pattern overwritten?",
1108      "no more memory",
1109      NULL,  /* never returned by pcre_exec() or pcre_dfa_exec() */
1110      "match limit exceeded",
1111      "callout error code",
1112      NULL,  /* BADUTF8/16 is handled specially */
1113      NULL,  /* BADUTF8/16 offset is handled specially */
1114      NULL,  /* PARTIAL is handled specially */
1115      "not used - internal error",
1116      "internal error - pattern overwritten?",
1117      "bad count value",
1118      "item unsupported for DFA matching",
1119      "backreference condition or recursion test not supported for DFA matching",
1120      "match limit not supported for DFA matching",
1121      "workspace size exceeded in DFA matching",
1122      "too much recursion for DFA matching",
1123      "recursion limit exceeded",
1124      "not used - internal error",
1125      "invalid combination of newline options",
1126      "bad offset value",
1127      NULL,  /* SHORTUTF8/16 is handled specially */
1128      "nested recursion at the same subject position",
1129      "JIT stack limit reached",
1130      "pattern compiled in wrong mode: 8-bit/16-bit error",
1131      "pattern compiled with other endianness",
1132      "invalid data in workspace for DFA restart",
1133      "bad JIT option",
1134      "bad length"
1135    };
1136    
     if (new_buffer == NULL || new_dbuffer == NULL || new_pbuffer == NULL)  
       {  
       fprintf(stderr, "pcretest: malloc(%d) failed\n", new_buffer_size);  
       exit(1);  
       }  
1137    
1138      memcpy(new_buffer, buffer, buffer_size);  /*************************************************
1139      memcpy(new_pbuffer, pbuffer, buffer_size);  *         Alternate character tables             *
1140    *************************************************/
1141    
1142      buffer_size = new_buffer_size;  /* By default, the "tables" pointer when calling PCRE is set to NULL, thereby
1143    using the default tables of the library. However, the T option can be used to
1144    select alternate sets of tables, for different kinds of testing. Note also that
1145    the L (locale) option also adjusts the tables. */
1146    
1147    /* This is the set of tables distributed as default with PCRE. It recognizes
1148    only ASCII characters. */
1149    
1150    static const pcre_uint8 tables0[] = {
1151    
1152    /* This table is a lower casing table. */
1153    
1154        0,  1,  2,  3,  4,  5,  6,  7,
1155        8,  9, 10, 11, 12, 13, 14, 15,
1156       16, 17, 18, 19, 20, 21, 22, 23,
1157       24, 25, 26, 27, 28, 29, 30, 31,
1158       32, 33, 34, 35, 36, 37, 38, 39,
1159       40, 41, 42, 43, 44, 45, 46, 47,
1160       48, 49, 50, 51, 52, 53, 54, 55,
1161       56, 57, 58, 59, 60, 61, 62, 63,
1162       64, 97, 98, 99,100,101,102,103,
1163      104,105,106,107,108,109,110,111,
1164      112,113,114,115,116,117,118,119,
1165      120,121,122, 91, 92, 93, 94, 95,
1166       96, 97, 98, 99,100,101,102,103,
1167      104,105,106,107,108,109,110,111,
1168      112,113,114,115,116,117,118,119,
1169      120,121,122,123,124,125,126,127,
1170      128,129,130,131,132,133,134,135,
1171      136,137,138,139,140,141,142,143,
1172      144,145,146,147,148,149,150,151,
1173      152,153,154,155,156,157,158,159,
1174      160,161,162,163,164,165,166,167,
1175      168,169,170,171,172,173,174,175,
1176      176,177,178,179,180,181,182,183,
1177      184,185,186,187,188,189,190,191,
1178      192,193,194,195,196,197,198,199,
1179      200,201,202,203,204,205,206,207,
1180      208,209,210,211,212,213,214,215,
1181      216,217,218,219,220,221,222,223,
1182      224,225,226,227,228,229,230,231,
1183      232,233,234,235,236,237,238,239,
1184      240,241,242,243,244,245,246,247,
1185      248,249,250,251,252,253,254,255,
1186    
1187    /* This table is a case flipping table. */
1188    
1189        0,  1,  2,  3,  4,  5,  6,  7,
1190        8,  9, 10, 11, 12, 13, 14, 15,
1191       16, 17, 18, 19, 20, 21, 22, 23,
1192       24, 25, 26, 27, 28, 29, 30, 31,
1193       32, 33, 34, 35, 36, 37, 38, 39,
1194       40, 41, 42, 43, 44, 45, 46, 47,
1195       48, 49, 50, 51, 52, 53, 54, 55,
1196       56, 57, 58, 59, 60, 61, 62, 63,
1197       64, 97, 98, 99,100,101,102,103,
1198      104,105,106,107,108,109,110,111,
1199      112,113,114,115,116,117,118,119,
1200      120,121,122, 91, 92, 93, 94, 95,
1201       96, 65, 66, 67, 68, 69, 70, 71,
1202       72, 73, 74, 75, 76, 77, 78, 79,
1203       80, 81, 82, 83, 84, 85, 86, 87,
1204       88, 89, 90,123,124,125,126,127,
1205      128,129,130,131,132,133,134,135,
1206      136,137,138,139,140,141,142,143,
1207      144,145,146,147,148,149,150,151,
1208      152,153,154,155,156,157,158,159,
1209      160,161,162,163,164,165,166,167,
1210      168,169,170,171,172,173,174,175,
1211      176,177,178,179,180,181,182,183,
1212      184,185,186,187,188,189,190,191,
1213      192,193,194,195,196,197,198,199,
1214      200,201,202,203,204,205,206,207,
1215      208,209,210,211,212,213,214,215,
1216      216,217,218,219,220,221,222,223,
1217      224,225,226,227,228,229,230,231,
1218      232,233,234,235,236,237,238,239,
1219      240,241,242,243,244,245,246,247,
1220      248,249,250,251,252,253,254,255,
1221    
1222    /* This table contains bit maps for various character classes. Each map is 32
1223    bytes long and the bits run from the least significant end of each byte. The
1224    classes that have their own maps are: space, xdigit, digit, upper, lower, word,
1225    graph, print, punct, and cntrl. Other classes are built from combinations. */
1226    
1227      0x00,0x3e,0x00,0x00,0x01,0x00,0x00,0x00,
1228      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1229      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1230      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1231    
1232      0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
1233      0x7e,0x00,0x00,0x00,0x7e,0x00,0x00,0x00,
1234      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1235      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1236    
1237      0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
1238      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1239      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1240      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1241    
1242      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1243      0xfe,0xff,0xff,0x07,0x00,0x00,0x00,0x00,
1244      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1245      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1246    
1247      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1248      0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0x07,
1249      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1250      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1251    
1252      0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
1253      0xfe,0xff,0xff,0x87,0xfe,0xff,0xff,0x07,
1254      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1255      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1256    
1257      0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0xff,
1258      0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,
1259      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1260      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1261    
1262      0x00,0x00,0x00,0x00,0xff,0xff,0xff,0xff,
1263      0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,
1264      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1265      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1266    
1267      0x00,0x00,0x00,0x00,0xfe,0xff,0x00,0xfc,
1268      0x01,0x00,0x00,0xf8,0x01,0x00,0x00,0x78,
1269      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1270      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1271    
1272      0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x00,
1273      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
1274      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1275      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1276    
1277    /* This table identifies various classes of character by individual bits:
1278      0x01   white space character
1279      0x02   letter
1280      0x04   decimal digit
1281      0x08   hexadecimal digit
1282      0x10   alphanumeric or '_'
1283      0x80   regular expression metacharacter or binary zero
1284    */
1285    
1286      start = new_buffer + (start - buffer);    0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7 */
1287      here = new_buffer + (here - buffer);    0x00,0x01,0x01,0x00,0x01,0x01,0x00,0x00, /*   8- 15 */
1288      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  16- 23 */
1289      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  24- 31 */
1290      0x01,0x00,0x00,0x00,0x80,0x00,0x00,0x00, /*    - '  */
1291      0x80,0x80,0x80,0x80,0x00,0x00,0x80,0x00, /*  ( - /  */
1292      0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /*  0 - 7  */
1293      0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x80, /*  8 - ?  */
1294      0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /*  @ - G  */
1295      0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  H - O  */
1296      0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  P - W  */
1297      0x12,0x12,0x12,0x80,0x80,0x00,0x80,0x10, /*  X - _  */
1298      0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /*  ` - g  */
1299      0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  h - o  */
1300      0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  p - w  */
1301      0x12,0x12,0x12,0x80,0x80,0x00,0x00,0x00, /*  x -127 */
1302      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */
1303      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */
1304      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */
1305      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */
1306      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */
1307      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */
1308      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */
1309      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
1310      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */
1311      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */
1312      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */
1313      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */
1314      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */
1315      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */
1316      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
1317      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */
1318    
1319    /* This is a set of tables that came orginally from a Windows user. It seems to
1320    be at least an approximation of ISO 8859. In particular, there are characters
1321    greater than 128 that are marked as spaces, letters, etc. */
1322    
1323    static const pcre_uint8 tables1[] = {
1324    0,1,2,3,4,5,6,7,
1325    8,9,10,11,12,13,14,15,
1326    16,17,18,19,20,21,22,23,
1327    24,25,26,27,28,29,30,31,
1328    32,33,34,35,36,37,38,39,
1329    40,41,42,43,44,45,46,47,
1330    48,49,50,51,52,53,54,55,
1331    56,57,58,59,60,61,62,63,
1332    64,97,98,99,100,101,102,103,
1333    104,105,106,107,108,109,110,111,
1334    112,113,114,115,116,117,118,119,
1335    120,121,122,91,92,93,94,95,
1336    96,97,98,99,100,101,102,103,
1337    104,105,106,107,108,109,110,111,
1338    112,113,114,115,116,117,118,119,
1339    120,121,122,123,124,125,126,127,
1340    128,129,130,131,132,133,134,135,
1341    136,137,138,139,140,141,142,143,
1342    144,145,146,147,148,149,150,151,
1343    152,153,154,155,156,157,158,159,
1344    160,161,162,163,164,165,166,167,
1345    168,169,170,171,172,173,174,175,
1346    176,177,178,179,180,181,182,183,
1347    184,185,186,187,188,189,190,191,
1348    224,225,226,227,228,229,230,231,
1349    232,233,234,235,236,237,238,239,
1350    240,241,242,243,244,245,246,215,
1351    248,249,250,251,252,253,254,223,
1352    224,225,226,227,228,229,230,231,
1353    232,233,234,235,236,237,238,239,
1354    240,241,242,243,244,245,246,247,
1355    248,249,250,251,252,253,254,255,
1356    0,1,2,3,4,5,6,7,
1357    8,9,10,11,12,13,14,15,
1358    16,17,18,19,20,21,22,23,
1359    24,25,26,27,28,29,30,31,
1360    32,33,34,35,36,37,38,39,
1361    40,41,42,43,44,45,46,47,
1362    48,49,50,51,52,53,54,55,
1363    56,57,58,59,60,61,62,63,
1364    64,97,98,99,100,101,102,103,
1365    104,105,106,107,108,109,110,111,
1366    112,113,114,115,116,117,118,119,
1367    120,121,122,91,92,93,94,95,
1368    96,65,66,67,68,69,70,71,
1369    72,73,74,75,76,77,78,79,
1370    80,81,82,83,84,85,86,87,
1371    88,89,90,123,124,125,126,127,
1372    128,129,130,131,132,133,134,135,
1373    136,137,138,139,140,141,142,143,
1374    144,145,146,147,148,149,150,151,
1375    152,153,154,155,156,157,158,159,
1376    160,161,162,163,164,165,166,167,
1377    168,169,170,171,172,173,174,175,
1378    176,177,178,179,180,181,182,183,
1379    184,185,186,187,188,189,190,191,
1380    224,225,226,227,228,229,230,231,
1381    232,233,234,235,236,237,238,239,
1382    240,241,242,243,244,245,246,215,
1383    248,249,250,251,252,253,254,223,
1384    192,193,194,195,196,197,198,199,
1385    200,201,202,203,204,205,206,207,
1386    208,209,210,211,212,213,214,247,
1387    216,217,218,219,220,221,222,255,
1388    0,62,0,0,1,0,0,0,
1389    0,0,0,0,0,0,0,0,
1390    32,0,0,0,1,0,0,0,
1391    0,0,0,0,0,0,0,0,
1392    0,0,0,0,0,0,255,3,
1393    126,0,0,0,126,0,0,0,
1394    0,0,0,0,0,0,0,0,
1395    0,0,0,0,0,0,0,0,
1396    0,0,0,0,0,0,255,3,
1397    0,0,0,0,0,0,0,0,
1398    0,0,0,0,0,0,12,2,
1399    0,0,0,0,0,0,0,0,
1400    0,0,0,0,0,0,0,0,
1401    254,255,255,7,0,0,0,0,
1402    0,0,0,0,0,0,0,0,
1403    255,255,127,127,0,0,0,0,
1404    0,0,0,0,0,0,0,0,
1405    0,0,0,0,254,255,255,7,
1406    0,0,0,0,0,4,32,4,
1407    0,0,0,128,255,255,127,255,
1408    0,0,0,0,0,0,255,3,
1409    254,255,255,135,254,255,255,7,
1410    0,0,0,0,0,4,44,6,
1411    255,255,127,255,255,255,127,255,
1412    0,0,0,0,254,255,255,255,
1413    255,255,255,255,255,255,255,127,
1414    0,0,0,0,254,255,255,255,
1415    255,255,255,255,255,255,255,255,
1416    0,2,0,0,255,255,255,255,
1417    255,255,255,255,255,255,255,127,
1418    0,0,0,0,255,255,255,255,
1419    255,255,255,255,255,255,255,255,
1420    0,0,0,0,254,255,0,252,
1421    1,0,0,248,1,0,0,120,
1422    0,0,0,0,254,255,255,255,
1423    0,0,128,0,0,0,128,0,
1424    255,255,255,255,0,0,0,0,
1425    0,0,0,0,0,0,0,128,
1426    255,255,255,255,0,0,0,0,
1427    0,0,0,0,0,0,0,0,
1428    128,0,0,0,0,0,0,0,
1429    0,1,1,0,1,1,0,0,
1430    0,0,0,0,0,0,0,0,
1431    0,0,0,0,0,0,0,0,
1432    1,0,0,0,128,0,0,0,
1433    128,128,128,128,0,0,128,0,
1434    28,28,28,28,28,28,28,28,
1435    28,28,0,0,0,0,0,128,
1436    0,26,26,26,26,26,26,18,
1437    18,18,18,18,18,18,18,18,
1438    18,18,18,18,18,18,18,18,
1439    18,18,18,128,128,0,128,16,
1440    0,26,26,26,26,26,26,18,
1441    18,18,18,18,18,18,18,18,
1442    18,18,18,18,18,18,18,18,
1443    18,18,18,128,128,0,0,0,
1444    0,0,0,0,0,1,0,0,
1445    0,0,0,0,0,0,0,0,
1446    0,0,0,0,0,0,0,0,
1447    0,0,0,0,0,0,0,0,
1448    1,0,0,0,0,0,0,0,
1449    0,0,18,0,0,0,0,0,
1450    0,0,20,20,0,18,0,0,
1451    0,20,18,0,0,0,0,0,
1452    18,18,18,18,18,18,18,18,
1453    18,18,18,18,18,18,18,18,
1454    18,18,18,18,18,18,18,0,
1455    18,18,18,18,18,18,18,18,
1456    18,18,18,18,18,18,18,18,
1457    18,18,18,18,18,18,18,18,
1458    18,18,18,18,18,18,18,0,
1459    18,18,18,18,18,18,18,18
1460    };
1461    
     free(buffer);  
     free(dbuffer);  
     free(pbuffer);  
1462    
     buffer = new_buffer;  
     dbuffer = new_dbuffer;  
     pbuffer = new_pbuffer;  
     }  
   }  
1463    
 return NULL;  /* Control never gets here */  
 }  
1464    
1465    #ifndef HAVE_STRERROR
1466    /*************************************************
1467    *     Provide strerror() for non-ANSI libraries  *
1468    *************************************************/
1469    
1470    /* Some old-fashioned systems still around (e.g. SunOS4) don't have strerror()
1471    in their libraries, but can provide the same facility by this simple
1472    alternative function. */
1473    
1474    extern int   sys_nerr;
1475    extern char *sys_errlist[];
1476    
1477    char *
1478    strerror(int n)
1479    {
1480    if (n < 0 || n >= sys_nerr) return "unknown error number";
1481    return sys_errlist[n];
1482    }
1483    #endif /* HAVE_STRERROR */
1484    
1485    
1486    
1487  /*************************************************  /*************************************************
1488  *          Read number from string               *  *       Print newline configuration              *
1489  *************************************************/  *************************************************/
1490    
1491  /* We don't use strtoul() because SunOS4 doesn't have it. Rather than mess  /*
 around with conditional compilation, just do the job by hand. It is only used  
 for unpicking arguments, so just keep it simple.  
   
1492  Arguments:  Arguments:
1493    str           string to be converted    rc         the return code from PCRE_CONFIG_NEWLINE
1494    endptr        where to put the end pointer    isc        TRUE if called from "-C newline"
1495    Returns:     nothing
 Returns:        the unsigned long  
1496  */  */
1497    
1498  static int  static void
1499  get_value(unsigned char *str, unsigned char **endptr)  print_newline_config(int rc, BOOL isc)
1500  {  {
1501  int result = 0;  const char *s = NULL;
1502  while(*str != 0 && isspace(*str)) str++;  if (!isc) printf("  Newline sequence is ");
1503  while (isdigit(*str)) result = result * 10 + (int)(*str++ - '0');  switch(rc)
1504  *endptr = str;    {
1505  return(result);    case CHAR_CR: s = "CR"; break;
1506      case CHAR_LF: s = "LF"; break;
1507      case (CHAR_CR<<8 | CHAR_LF): s = "CRLF"; break;
1508      case -1: s = "ANY"; break;
1509      case -2: s = "ANYCRLF"; break;
1510    
1511      default:
1512      printf("a non-standard value: 0x%04x\n", rc);
1513      return;
1514      }
1515    
1516    printf("%s\n", s);
1517  }  }
1518    
1519    
1520    
1521    /*************************************************
1522    *         JIT memory callback                    *
1523    *************************************************/
1524    
1525    static pcre_jit_stack* jit_callback(void *arg)
1526    {
1527    jit_was_used = TRUE;
1528    return (pcre_jit_stack *)arg;
1529    }
1530    
1531    
1532    #if !defined NOUTF || defined SUPPORT_PCRE16 || defined SUPPORT_PCRE32
1533  /*************************************************  /*************************************************
1534  *            Convert UTF-8 string to value       *  *            Convert UTF-8 string to value       *
1535  *************************************************/  *************************************************/
# Line 297  Returns:      >  0 => the number of byte Line 1545  Returns:      >  0 => the number of byte
1545                -6 to 0 => malformed UTF-8 character at offset = (-return)                -6 to 0 => malformed UTF-8 character at offset = (-return)
1546  */  */
1547    
 #if !defined NOUTF8  
   
1548  static int  static int
1549  utf82ord(unsigned char *utf8bytes, int *vptr)  utf82ord(pcre_uint8 *utf8bytes, pcre_uint32 *vptr)
1550  {  {
1551  int c = *utf8bytes++;  pcre_uint32 c = *utf8bytes++;
1552  int d = c;  pcre_uint32 d = c;
1553  int i, j, s;  int i, j, s;
1554    
1555  for (i = -1; i < 6; i++)               /* i is number of additional bytes */  for (i = -1; i < 6; i++)               /* i is number of additional bytes */
# Line 331  for (j = 0; j < i; j++) Line 1577  for (j = 0; j < i; j++)
1577  /* Check that encoding was the correct unique one */  /* Check that encoding was the correct unique one */
1578    
1579  for (j = 0; j < utf8_table1_size; j++)  for (j = 0; j < utf8_table1_size; j++)
1580    if (d <= utf8_table1[j]) break;    if (d <= (pcre_uint32)utf8_table1[j]) break;
1581  if (j != i) return -(i+1);  if (j != i) return -(i+1);
1582    
1583  /* Valid value */  /* Valid value */
# Line 339  if (j != i) return -(i+1); Line 1585  if (j != i) return -(i+1);
1585  *vptr = d;  *vptr = d;
1586  return i+1;  return i+1;
1587  }  }
1588    #endif /* NOUTF || SUPPORT_PCRE16 */
 #endif  
1589    
1590    
1591    
1592    #if defined SUPPORT_PCRE8 && !defined NOUTF
1593  /*************************************************  /*************************************************
1594  *       Convert character value to UTF-8         *  *       Convert character value to UTF-8         *
1595  *************************************************/  *************************************************/
# Line 358  Arguments: Line 1604  Arguments:
1604  Returns:     number of characters placed in the buffer  Returns:     number of characters placed in the buffer
1605  */  */
1606    
 #if !defined NOUTF8  
   
1607  static int  static int
1608  ord2utf8(int cvalue, uschar *utf8bytes)  ord2utf8(pcre_uint32 cvalue, pcre_uint8 *utf8bytes)
1609  {  {
1610  register int i, j;  register int i, j;
1611    if (cvalue > 0x7fffffffu)
1612      return -1;
1613  for (i = 0; i < utf8_table1_size; i++)  for (i = 0; i < utf8_table1_size; i++)
1614    if (cvalue <= utf8_table1[i]) break;    if (cvalue <= (pcre_uint32)utf8_table1[i]) break;
1615  utf8bytes += i;  utf8bytes += i;
1616  for (j = i; j > 0; j--)  for (j = i; j > 0; j--)
1617   {   {
# Line 375  for (j = i; j > 0; j--) Line 1621  for (j = i; j > 0; j--)
1621  *utf8bytes = utf8_table2[i] | cvalue;  *utf8bytes = utf8_table2[i] | cvalue;
1622  return i + 1;  return i + 1;
1623  }  }
   
1624  #endif  #endif
1625    
1626    
1627    #ifdef SUPPORT_PCRE16
1628  /*************************************************  /*************************************************
1629  *             Print character string             *  *         Convert a string to 16-bit             *
1630  *************************************************/  *************************************************/
1631    
1632  /* Character string printing function. Must handle UTF-8 strings in utf8  /* In non-UTF mode, the space needed for a 16-bit string is exactly double the
1633  mode. Yields number of characters printed. If handed a NULL file, just counts  8-bit size. For a UTF-8 string, the size needed for UTF-16 is no more than
1634  chars without printing. */  double, because up to 0xffff uses no more than 3 bytes in UTF-8 but possibly 4
1635    in UTF-16. Higher values use 4 bytes in UTF-8 and up to 4 bytes in UTF-16. The
1636    result is always left in buffer16.
1637    
1638    Note that this function does not object to surrogate values. This is
1639    deliberate; it makes it possible to construct UTF-16 strings that are invalid,
1640    for the purpose of testing that they are correctly faulted.
1641    
1642    Patterns to be converted are either plain ASCII or UTF-8; data lines are always
1643    in UTF-8 so that values greater than 255 can be handled.
1644    
1645  static int pchars(unsigned char *p, int length, FILE *f)  Arguments:
1646      data       TRUE if converting a data line; FALSE for a regex
1647      p          points to a byte string
1648      utf        true if UTF-8 (to be converted to UTF-16)
1649      len        number of bytes in the string (excluding trailing zero)
1650    
1651    Returns:     number of 16-bit data items used (excluding trailing zero)
1652                 OR -1 if a UTF-8 string is malformed
1653                 OR -2 if a value > 0x10ffff is encountered
1654                 OR -3 if a value > 0xffff is encountered when not in UTF mode
1655    */
1656    
1657    static int
1658    to16(int data, pcre_uint8 *p, int utf, int len)
1659  {  {
1660  int c = 0;  pcre_uint16 *pp;
 int yield = 0;  
1661    
1662  while (length-- > 0)  if (buffer16_size < 2*len + 2)
1663    {    {
1664  #if !defined NOUTF8    if (buffer16 != NULL) free(buffer16);
1665    if (use_utf8)    buffer16_size = 2*len + 2;
1666      buffer16 = (pcre_uint16 *)malloc(buffer16_size);
1667      if (buffer16 == NULL)
1668      {      {
1669      int rc = utf82ord(p, &c);      fprintf(stderr, "pcretest: malloc(%d) failed for buffer16\n", buffer16_size);
1670        exit(1);
     if (rc > 0 && rc <= length + 1)   /* Mustn't run over the end */  
       {  
       length -= rc - 1;  
       p += rc;  
       if (PRINTHEX(c))  
         {  
         if (f != NULL) fprintf(f, "%c", c);  
         yield++;  
         }  
       else  
         {  
         int n = 4;  
         if (f != NULL) fprintf(f, "\\x{%02x}", c);  
         yield += (n <= 0x000000ff)? 2 :  
                  (n <= 0x00000fff)? 3 :  
                  (n <= 0x0000ffff)? 4 :  
                  (n <= 0x000fffff)? 5 : 6;  
         }  
       continue;  
       }  
1671      }      }
1672  #endif    }
1673    
1674     /* Not UTF-8, or malformed UTF-8  */  pp = buffer16;
1675    
1676    c = *p++;  if (!utf && !data)
1677    if (PRINTHEX(c))    {
1678      {    while (len-- > 0) *pp++ = *p++;
1679      if (f != NULL) fprintf(f, "%c", c);    }
1680      yield++;  
1681      }  else
1682    else    {
1683      pcre_uint32 c = 0;
1684      while (len > 0)
1685      {      {
1686      if (f != NULL) fprintf(f, "\\x%02x", c);      int chlen = utf82ord(p, &c);
1687      yield += 4;      if (chlen <= 0) return -1;
1688        if (c > 0x10ffff) return -2;
1689        p += chlen;
1690        len -= chlen;
1691        if (c < 0x10000) *pp++ = c; else
1692          {
1693          if (!utf) return -3;
1694          c -= 0x10000;
1695          *pp++ = 0xD800 | (c >> 10);
1696          *pp++ = 0xDC00 | (c & 0x3ff);
1697          }
1698      }      }
1699    }    }
1700    
1701  return yield;  *pp = 0;
1702    return pp - buffer16;
1703  }  }
1704    #endif
1705    
1706    #ifdef SUPPORT_PCRE32
   
1707  /*************************************************  /*************************************************
1708  *              Callout function                  *  *         Convert a string to 32-bit             *
1709  *************************************************/  *************************************************/
1710    
1711  /* Called from PCRE as a result of the (?C) item. We print out where we are in  /* In non-UTF mode, the space needed for a 32-bit string is exactly four times the
1712  the match. Yield zero unless more callouts than the fail count, or the callout  8-bit size. For a UTF-8 string, the size needed for UTF-32 is no more than four
1713  data is not zero. */  times, because up to 0xffff uses no more than 3 bytes in UTF-8 but possibly 4
1714    in UTF-32. Higher values use 4 bytes in UTF-8 and up to 4 bytes in UTF-32. The
1715    result is always left in buffer32.
1716    
1717    Note that this function does not object to surrogate values. This is
1718    deliberate; it makes it possible to construct UTF-32 strings that are invalid,
1719    for the purpose of testing that they are correctly faulted.
1720    
1721  static int callout(pcre_callout_block *cb)  Patterns to be converted are either plain ASCII or UTF-8; data lines are always
1722    in UTF-8 so that values greater than 255 can be handled.
1723    
1724    Arguments:
1725      data       TRUE if converting a data line; FALSE for a regex
1726      p          points to a byte string
1727      utf        true if UTF-8 (to be converted to UTF-32)
1728      len        number of bytes in the string (excluding trailing zero)
1729    
1730    Returns:     number of 32-bit data items used (excluding trailing zero)
1731                 OR -1 if a UTF-8 string is malformed
1732                 OR -2 if a value > 0x10ffff is encountered
1733                 OR -3 if an ill-formed value is encountered (i.e. a surrogate)
1734    */
1735    
1736    static int
1737    to32(int data, pcre_uint8 *p, int utf, int len)
1738  {  {
1739  FILE *f = (first_callout | callout_extra)? outfile : NULL;  pcre_uint32 *pp;
 int i, pre_start, post_start, subject_length;  
1740    
1741  if (callout_extra)  if (buffer32_size < 4*len + 4)
1742    {    {
1743    fprintf(f, "Callout %d: last capture = %d\n",    if (buffer32 != NULL) free(buffer32);
1744      cb->callout_number, cb->capture_last);    buffer32_size = 4*len + 4;
1745      buffer32 = (pcre_uint32 *)malloc(buffer32_size);
1746      if (buffer32 == NULL)
1747        {
1748        fprintf(stderr, "pcretest: malloc(%d) failed for buffer32\n", buffer32_size);
1749        exit(1);
1750        }
1751      }
1752    
1753    for (i = 0; i < cb->capture_top * 2; i += 2)  pp = buffer32;
1754    
1755    if (!utf && !data)
1756      {
1757      while (len-- > 0) *pp++ = *p++;
1758      }
1759    
1760    else
1761      {
1762      pcre_uint32 c = 0;
1763      while (len > 0)
1764      {      {
1765      if (cb->offset_vector[i] < 0)      int chlen = utf82ord(p, &c);
1766        fprintf(f, "%2d: <unset>\n", i/2);      if (chlen <= 0) return -1;
1767      else      if (utf)
1768        {        {
1769        fprintf(f, "%2d: ", i/2);        if (c > 0x10ffff) return -2;
1770        (void)pchars((unsigned char *)cb->subject + cb->offset_vector[i],        if (!data && (c & 0xfffff800u) == 0xd800u) return -3;
         cb->offset_vector[i+1] - cb->offset_vector[i], f);  
       fprintf(f, "\n");  
1771        }        }
1772    
1773        p += chlen;
1774        len -= chlen;
1775        *pp++ = c;
1776      }      }
1777    }    }
1778    
1779  /* Re-print the subject in canonical form, the first time or if giving full  *pp = 0;
1780  datails. On subsequent calls in the same match, we use pchars just to find the  return pp - buffer32;
1781  printed lengths of the substrings. */  }
   
 if (f != NULL) fprintf(f, "--->");  
1782    
1783  pre_start = pchars((unsigned char *)cb->subject, cb->start_match, f);  /* Check that a 32-bit character string is valid UTF-32.
 post_start = pchars((unsigned char *)(cb->subject + cb->start_match),  
   cb->current_position - cb->start_match, f);  
1784    
1785  subject_length = pchars((unsigned char *)cb->subject, cb->subject_length, NULL);  Arguments:
1786      string       points to the string
1787      length       length of string, or -1 if the string is zero-terminated
1788    
1789  (void)pchars((unsigned char *)(cb->subject + cb->current_position),  Returns:       TRUE  if the string is a valid UTF-32 string
1790    cb->subject_length - cb->current_position, f);                 FALSE otherwise
1791    */
1792    
1793  if (f != NULL) fprintf(f, "\n");  #ifdef NEVER
1794    
1795  /* Always print appropriate indicators, with callout number if not already  #ifdef SUPPORT_UTF
1796  shown. For automatic callouts, show the pattern offset. */  static BOOL
1797    valid_utf32(pcre_uint32 *string, int length)
1798    {
1799    register pcre_uint32 *p;
1800    register pcre_uint32 c;
1801    
1802  if (cb->callout_number == 255)  for (p = string; length-- > 0; p++)
   {  
   fprintf(outfile, "%+3d ", cb->pattern_position);  
   if (cb->pattern_position > 99) fprintf(outfile, "\n    ");  
   }  
 else  
1803    {    {
1804    if (callout_extra) fprintf(outfile, "    ");    c = *p;
     else fprintf(outfile, "%3d ", cb->callout_number);  
   }  
1805    
1806  for (i = 0; i < pre_start; i++) fprintf(outfile, " ");    if (c > 0x10ffffu)
1807  fprintf(outfile, "^");      return FALSE;
1808    
1809  if (post_start > 0)    /* A surrogate */
1810    {    if ((c & 0xfffff800u) == 0xd800u)
1811    for (i = 0; i < post_start - 1; i++) fprintf(outfile, " ");      return FALSE;
1812    fprintf(outfile, "^");  
1813      /* Non-character */
1814      if ((c & 0xfffeu) == 0xfffeu || (c >= 0xfdd0u && c <= 0xfdefu))
1815        return FALSE;
1816    }    }
1817    
1818  for (i = 0; i < subject_length - pre_start - post_start + 4; i++)  return TRUE;
1819    fprintf(outfile, " ");  }
1820    #endif /* SUPPORT_UTF */
1821    
1822  fprintf(outfile, "%.*s", (cb->next_item_length == 0)? 1 : cb->next_item_length,  #endif /* NEVER */
   pbuffer + cb->pattern_position);  
1823    
 fprintf(outfile, "\n");  
 first_callout = 0;  
1824    
1825  if (cb->callout_data != NULL)  #endif
1826    {  
1827    int callout_data = *((int *)(cb->callout_data));  /*************************************************
1828    if (callout_data != 0)  *        Read or extend an input line            *
1829      {  *************************************************/
1830    
1831    /* Input lines are read into buffer, but both patterns and data lines can be
1832    continued over multiple input lines. In addition, if the buffer fills up, we
1833    want to automatically expand it so as to be able to handle extremely large
1834    lines that are needed for certain stress tests. When the input buffer is
1835    expanded, the other two buffers must also be expanded likewise, and the
1836    contents of pbuffer, which are a copy of the input for callouts, must be
1837    preserved (for when expansion happens for a data line). This is not the most
1838    optimal way of handling this, but hey, this is just a test program!
1839    
1840    Arguments:
1841      f            the file to read
1842      start        where in buffer to start (this *must* be within buffer)
1843      prompt       for stdin or readline()
1844    
1845    Returns:       pointer to the start of new data
1846                   could be a copy of start, or could be moved
1847                   NULL if no data read and EOF reached
1848    */
1849    
1850    static pcre_uint8 *
1851    extend_inputline(FILE *f, pcre_uint8 *start, const char *prompt)
1852    {
1853    pcre_uint8 *here = start;
1854    
1855    for (;;)
1856      {
1857      size_t rlen = (size_t)(buffer_size - (here - buffer));
1858    
1859      if (rlen > 1000)
1860        {
1861        int dlen;
1862    
1863        /* If libreadline or libedit support is required, use readline() to read a
1864        line if the input is a terminal. Note that readline() removes the trailing
1865        newline, so we must put it back again, to be compatible with fgets(). */
1866    
1867    #if defined(SUPPORT_LIBREADLINE) || defined(SUPPORT_LIBEDIT)
1868        if (isatty(fileno(f)))
1869          {
1870          size_t len;
1871          char *s = readline(prompt);
1872          if (s == NULL) return (here == start)? NULL : start;
1873          len = strlen(s);
1874          if (len > 0) add_history(s);
1875          if (len > rlen - 1) len = rlen - 1;
1876          memcpy(here, s, len);
1877          here[len] = '\n';
1878          here[len+1] = 0;
1879          free(s);
1880          }
1881        else
1882    #endif
1883    
1884        /* Read the next line by normal means, prompting if the file is stdin. */
1885    
1886          {
1887          if (f == stdin) printf("%s", prompt);
1888          if (fgets((char *)here, rlen,  f) == NULL)
1889            return (here == start)? NULL : start;
1890          }
1891    
1892        dlen = (int)strlen((char *)here);
1893        if (dlen > 0 && here[dlen - 1] == '\n') return start;
1894        here += dlen;
1895        }
1896    
1897      else
1898        {
1899        int new_buffer_size = 2*buffer_size;
1900        pcre_uint8 *new_buffer = (pcre_uint8 *)malloc(new_buffer_size);
1901        pcre_uint8 *new_pbuffer = (pcre_uint8 *)malloc(new_buffer_size);
1902    
1903        if (new_buffer == NULL || new_pbuffer == NULL)
1904          {
1905          fprintf(stderr, "pcretest: malloc(%d) failed\n", new_buffer_size);
1906          exit(1);
1907          }
1908    
1909        memcpy(new_buffer, buffer, buffer_size);
1910        memcpy(new_pbuffer, pbuffer, buffer_size);
1911    
1912        buffer_size = new_buffer_size;
1913    
1914        start = new_buffer + (start - buffer);
1915        here = new_buffer + (here - buffer);
1916    
1917        free(buffer);
1918        free(pbuffer);
1919    
1920        buffer = new_buffer;
1921        pbuffer = new_pbuffer;
1922        }
1923      }
1924    
1925    return NULL;  /* Control never gets here */
1926    }
1927    
1928    
1929    
1930    /*************************************************
1931    *          Read number from string               *
1932    *************************************************/
1933    
1934    /* We don't use strtoul() because SunOS4 doesn't have it. Rather than mess
1935    around with conditional compilation, just do the job by hand. It is only used
1936    for unpicking arguments, so just keep it simple.
1937    
1938    Arguments:
1939      str           string to be converted
1940      endptr        where to put the end pointer
1941    
1942    Returns:        the unsigned long
1943    */
1944    
1945    static int
1946    get_value(pcre_uint8 *str, pcre_uint8 **endptr)
1947    {
1948    int result = 0;
1949    while(*str != 0 && isspace(*str)) str++;
1950    while (isdigit(*str)) result = result * 10 + (int)(*str++ - '0');
1951    *endptr = str;
1952    return(result);
1953    }
1954    
1955    
1956    
1957    /*************************************************
1958    *             Print one character                *
1959    *************************************************/
1960    
1961    /* Print a single character either literally, or as a hex escape. */
1962    
1963    static int pchar(pcre_uint32 c, FILE *f)
1964    {
1965    int n = 0;
1966    if (PRINTOK(c))
1967      {
1968      if (f != NULL) fprintf(f, "%c", c);
1969      return 1;
1970      }
1971    
1972    if (c < 0x100)
1973      {
1974      if (use_utf)
1975        {
1976        if (f != NULL) fprintf(f, "\\x{%02x}", c);
1977        return 6;
1978        }
1979      else
1980        {
1981        if (f != NULL) fprintf(f, "\\x%02x", c);
1982        return 4;
1983        }
1984      }
1985    
1986    if (f != NULL) n = fprintf(f, "\\x{%02x}", c);
1987    return n >= 0 ? n : 0;
1988    }
1989    
1990    
1991    
1992    #ifdef SUPPORT_PCRE8
1993    /*************************************************
1994    *         Print 8-bit character string           *
1995    *************************************************/
1996    
1997    /* Must handle UTF-8 strings in utf8 mode. Yields number of characters printed.
1998    If handed a NULL file, just counts chars without printing. */
1999    
2000    static int pchars(pcre_uint8 *p, int length, FILE *f)
2001    {
2002    pcre_uint32 c = 0;
2003    int yield = 0;
2004    
2005    if (length < 0)
2006      length = strlen((char *)p);
2007    
2008    while (length-- > 0)
2009      {
2010    #if !defined NOUTF
2011      if (use_utf)
2012        {
2013        int rc = utf82ord(p, &c);
2014        if (rc > 0 && rc <= length + 1)   /* Mustn't run over the end */
2015          {
2016          length -= rc - 1;
2017          p += rc;
2018          yield += pchar(c, f);
2019          continue;
2020          }
2021        }
2022    #endif
2023      c = *p++;
2024      yield += pchar(c, f);
2025      }
2026    
2027    return yield;
2028    }
2029    #endif
2030    
2031    
2032    
2033    #ifdef SUPPORT_PCRE16
2034    /*************************************************
2035    *    Find length of 0-terminated 16-bit string   *
2036    *************************************************/
2037    
2038    static int strlen16(PCRE_SPTR16 p)
2039    {
2040    int len = 0;
2041    while (*p++ != 0) len++;
2042    return len;
2043    }
2044    #endif  /* SUPPORT_PCRE16 */
2045    
2046    
2047    
2048    #ifdef SUPPORT_PCRE32
2049    /*************************************************
2050    *    Find length of 0-terminated 32-bit string   *
2051    *************************************************/
2052    
2053    static int strlen32(PCRE_SPTR32 p)
2054    {
2055    int len = 0;
2056    while (*p++ != 0) len++;
2057    return len;
2058    }
2059    #endif  /* SUPPORT_PCRE32 */
2060    
2061    
2062    
2063    #ifdef SUPPORT_PCRE16
2064    /*************************************************
2065    *           Print 16-bit character string        *
2066    *************************************************/
2067    
2068    /* Must handle UTF-16 strings in utf mode. Yields number of characters printed.
2069    If handed a NULL file, just counts chars without printing. */
2070    
2071    static int pchars16(PCRE_SPTR16 p, int length, FILE *f)
2072    {
2073    int yield = 0;
2074    
2075    if (length < 0)
2076      length = strlen16(p);
2077    
2078    while (length-- > 0)
2079      {
2080      pcre_uint32 c = *p++ & 0xffff;
2081    #if !defined NOUTF
2082      if (use_utf && c >= 0xD800 && c < 0xDC00 && length > 0)
2083        {
2084        int d = *p & 0xffff;
2085        if (d >= 0xDC00 && d < 0xDFFF)
2086          {
2087          c = ((c & 0x3ff) << 10) + (d & 0x3ff) + 0x10000;
2088          length--;
2089          p++;
2090          }
2091        }
2092    #endif
2093      yield += pchar(c, f);
2094      }
2095    
2096    return yield;
2097    }
2098    #endif  /* SUPPORT_PCRE16 */
2099    
2100    
2101    
2102    #ifdef SUPPORT_PCRE32
2103    /*************************************************
2104    *           Print 32-bit character string        *
2105    *************************************************/
2106    
2107    /* Must handle UTF-32 strings in utf mode. Yields number of characters printed.
2108    If handed a NULL file, just counts chars without printing. */
2109    
2110    static int pchars32(PCRE_SPTR32 p, int length, BOOL utf, FILE *f)
2111    {
2112    int yield = 0;
2113    
2114    (void)(utf);  /* Avoid compiler warning */
2115    
2116    if (length < 0)
2117      length = strlen32(p);
2118    
2119    while (length-- > 0)
2120      {
2121      pcre_uint32 c = *p++;
2122      yield += pchar(c, f);
2123      }
2124    
2125    return yield;
2126    }
2127    #endif  /* SUPPORT_PCRE32 */
2128    
2129    
2130    
2131    #ifdef SUPPORT_PCRE8
2132    /*************************************************
2133    *     Read a capture name (8-bit) and check it   *
2134    *************************************************/
2135    
2136    static pcre_uint8 *
2137    read_capture_name8(pcre_uint8 *p, pcre_uint8 **pp, pcre *re)
2138    {
2139    pcre_uint8 *npp = *pp;
2140    while (isalnum(*p)) *npp++ = *p++;
2141    *npp++ = 0;
2142    *npp = 0;
2143    if (pcre_get_stringnumber(re, (char *)(*pp)) < 0)
2144      {
2145      fprintf(outfile, "no parentheses with name \"");
2146      PCHARSV(*pp, 0, -1, outfile);
2147      fprintf(outfile, "\"\n");
2148      }
2149    
2150    *pp = npp;
2151    return p;
2152    }
2153    #endif  /* SUPPORT_PCRE8 */
2154    
2155    
2156    
2157    #ifdef SUPPORT_PCRE16
2158    /*************************************************
2159    *     Read a capture name (16-bit) and check it  *
2160    *************************************************/
2161    
2162    /* Note that the text being read is 8-bit. */
2163    
2164    static pcre_uint8 *
2165    read_capture_name16(pcre_uint8 *p, pcre_uint16 **pp, pcre *re)
2166    {
2167    pcre_uint16 *npp = *pp;
2168    while (isalnum(*p)) *npp++ = *p++;
2169    *npp++ = 0;
2170    *npp = 0;
2171    if (pcre16_get_stringnumber((pcre16 *)re, (PCRE_SPTR16)(*pp)) < 0)
2172      {
2173      fprintf(outfile, "no parentheses with name \"");
2174      PCHARSV(*pp, 0, -1, outfile);
2175      fprintf(outfile, "\"\n");
2176      }
2177    *pp = npp;
2178    return p;
2179    }
2180    #endif  /* SUPPORT_PCRE16 */
2181    
2182    
2183    
2184    #ifdef SUPPORT_PCRE32
2185    /*************************************************
2186    *     Read a capture name (32-bit) and check it  *
2187    *************************************************/
2188    
2189    /* Note that the text being read is 8-bit. */
2190    
2191    static pcre_uint8 *
2192    read_capture_name32(pcre_uint8 *p, pcre_uint32 **pp, pcre *re)
2193    {
2194    pcre_uint32 *npp = *pp;
2195    while (isalnum(*p)) *npp++ = *p++;
2196    *npp++ = 0;
2197    *npp = 0;
2198    if (pcre32_get_stringnumber((pcre32 *)re, (PCRE_SPTR32)(*pp)) < 0)
2199      {
2200      fprintf(outfile, "no parentheses with name \"");
2201      PCHARSV(*pp, 0, -1, outfile);
2202      fprintf(outfile, "\"\n");
2203      }
2204    *pp = npp;
2205    return p;
2206    }
2207    #endif  /* SUPPORT_PCRE32 */
2208    
2209    
2210    
2211    /*************************************************
2212    *              Callout function                  *
2213    *************************************************/
2214    
2215    /* Called from PCRE as a result of the (?C) item. We print out where we are in
2216    the match. Yield zero unless more callouts than the fail count, or the callout
2217    data is not zero. */
2218    
2219    static int callout(pcre_callout_block *cb)
2220    {
2221    FILE *f = (first_callout | callout_extra)? outfile : NULL;
2222    int i, pre_start, post_start, subject_length;
2223    
2224    if (callout_extra)
2225      {
2226      fprintf(f, "Callout %d: last capture = %d\n",
2227        cb->callout_number, cb->capture_last);
2228    
2229      for (i = 0; i < cb->capture_top * 2; i += 2)
2230        {
2231        if (cb->offset_vector[i] < 0)
2232          fprintf(f, "%2d: <unset>\n", i/2);
2233        else
2234          {
2235          fprintf(f, "%2d: ", i/2);
2236          PCHARSV(cb->subject, cb->offset_vector[i],
2237            cb->offset_vector[i+1] - cb->offset_vector[i], f);
2238          fprintf(f, "\n");
2239          }
2240        }
2241      }
2242    
2243    /* Re-print the subject in canonical form, the first time or if giving full
2244    datails. On subsequent calls in the same match, we use pchars just to find the
2245    printed lengths of the substrings. */
2246    
2247    if (f != NULL) fprintf(f, "--->");
2248    
2249    PCHARS(pre_start, cb->subject, 0, cb->start_match, f);
2250    PCHARS(post_start, cb->subject, cb->start_match,
2251      cb->current_position - cb->start_match, f);
2252    
2253    PCHARS(subject_length, cb->subject, 0, cb->subject_length, NULL);
2254    
2255    PCHARSV(cb->subject, cb->current_position,
2256      cb->subject_length - cb->current_position, f);
2257    
2258    if (f != NULL) fprintf(f, "\n");
2259    
2260    /* Always print appropriate indicators, with callout number if not already
2261    shown. For automatic callouts, show the pattern offset. */
2262    
2263    if (cb->callout_number == 255)
2264      {
2265      fprintf(outfile, "%+3d ", cb->pattern_position);
2266      if (cb->pattern_position > 99) fprintf(outfile, "\n    ");
2267      }
2268    else
2269      {
2270      if (callout_extra) fprintf(outfile, "    ");
2271        else fprintf(outfile, "%3d ", cb->callout_number);
2272      }
2273    
2274    for (i = 0; i < pre_start; i++) fprintf(outfile, " ");
2275    fprintf(outfile, "^");
2276    
2277    if (post_start > 0)
2278      {
2279      for (i = 0; i < post_start - 1; i++) fprintf(outfile, " ");
2280      fprintf(outfile, "^");
2281      }
2282    
2283    for (i = 0; i < subject_length - pre_start - post_start + 4; i++)
2284      fprintf(outfile, " ");
2285    
2286    fprintf(outfile, "%.*s", (cb->next_item_length == 0)? 1 : cb->next_item_length,
2287      pbuffer + cb->pattern_position);
2288    
2289    fprintf(outfile, "\n");
2290    first_callout = 0;
2291    
2292    if (cb->mark != last_callout_mark)
2293      {
2294      if (cb->mark == NULL)
2295        fprintf(outfile, "Latest Mark: <unset>\n");
2296      else
2297        {
2298        fprintf(outfile, "Latest Mark: ");
2299        PCHARSV(cb->mark, 0, -1, outfile);
2300        putc('\n', outfile);
2301        }
2302      last_callout_mark = cb->mark;
2303      }
2304    
2305    if (cb->callout_data != NULL)
2306      {
2307      int callout_data = *((int *)(cb->callout_data));
2308      if (callout_data != 0)
2309        {
2310      fprintf(outfile, "Callout data = %d\n", callout_data);      fprintf(outfile, "Callout data = %d\n", callout_data);
2311      return callout_data;      return callout_data;
2312      }      }
# Line 543  return (cb->callout_number != callout_fa Line 2321  return (cb->callout_number != callout_fa
2321  *            Local malloc functions              *  *            Local malloc functions              *
2322  *************************************************/  *************************************************/
2323    
2324  /* Alternative malloc function, to test functionality and show the size of the  /* Alternative malloc function, to test functionality and save the size of a
2325  compiled re. */  compiled re, which is the first store request that pcre_compile() makes. The
2326    show_malloc variable is set only during matching. */
2327    
2328  static void *new_malloc(size_t size)  static void *new_malloc(size_t size)
2329  {  {
2330  void *block = malloc(size);  void *block = malloc(size);
2331  gotten_store = size;  gotten_store = size;
2332    if (first_gotten_store == 0) first_gotten_store = size;
2333  if (show_malloc)  if (show_malloc)
2334    fprintf(outfile, "malloc       %3d %p\n", (int)size, block);    fprintf(outfile, "malloc       %3d %p\n", (int)size, block);
2335  return block;  return block;
# Line 562  if (show_malloc) Line 2342  if (show_malloc)
2342  free(block);  free(block);
2343  }  }
2344    
   
2345  /* For recursion malloc/free, to test stacking calls */  /* For recursion malloc/free, to test stacking calls */
2346    
2347  static void *stack_malloc(size_t size)  static void *stack_malloc(size_t size)
# Line 581  free(block); Line 2360  free(block);
2360  }  }
2361    
2362    
2363  /*************************************************  /*************************************************
2364  *          Call pcre_fullinfo()                  *  *          Call pcre_fullinfo()                  *
2365  *************************************************/  *************************************************/
2366    
2367    /* Get one piece of information from the pcre_fullinfo() function. When only
2368    one of 8-, 16- or 32-bit is supported, pcre_mode should always have the correct
2369    value, but the code is defensive.
2370    
2371    Arguments:
2372      re        compiled regex
2373      study     study data
2374      option    PCRE_INFO_xxx option
2375      ptr       where to put the data
2376    
2377    Returns:    0 when OK, < 0 on error
2378    */
2379    
2380    static int
2381    new_info(pcre *re, pcre_extra *study, int option, void *ptr)
2382    {
2383    int rc;
2384    
2385    if (pcre_mode == PCRE32_MODE)
2386    #ifdef SUPPORT_PCRE32
2387      rc = pcre32_fullinfo((pcre32 *)re, (pcre32_extra *)study, option, ptr);
2388    #else
2389      rc = PCRE_ERROR_BADMODE;
2390    #endif
2391    else if (pcre_mode == PCRE16_MODE)
2392    #ifdef SUPPORT_PCRE16
2393      rc = pcre16_fullinfo((pcre16 *)re, (pcre16_extra *)study, option, ptr);
2394    #else
2395      rc = PCRE_ERROR_BADMODE;
2396    #endif
2397    else
2398    #ifdef SUPPORT_PCRE8
2399      rc = pcre_fullinfo(re, study, option, ptr);
2400    #else
2401      rc = PCRE_ERROR_BADMODE;
2402    #endif
2403    
2404    if (rc < 0)
2405      {
2406      fprintf(outfile, "Error %d from pcre%s_fullinfo(%d)\n", rc,
2407        pcre_mode == PCRE32_MODE ? "32" : pcre_mode == PCRE16_MODE ? "16" : "", option);
2408      if (rc == PCRE_ERROR_BADMODE)
2409        fprintf(outfile, "Running in %d-bit mode but pattern was compiled in "
2410          "%d-bit mode\n", 8 * CHAR_SIZE,
2411          8 * (REAL_PCRE_FLAGS(re) & PCRE_MODE_MASK));
2412      }
2413    
2414    return rc;
2415    }
2416    
2417    
2418    
2419    /*************************************************
2420    *             Swap byte functions                *
2421    *************************************************/
2422    
2423    /* The following functions swap the bytes of a pcre_uint16 and pcre_uint32
2424    value, respectively.
2425    
2426    Arguments:
2427      value        any number
2428    
2429    Returns:       the byte swapped value
2430    */
2431    
2432    static pcre_uint32
2433    swap_uint32(pcre_uint32 value)
2434    {
2435    return ((value & 0x000000ff) << 24) |
2436           ((value & 0x0000ff00) <<  8) |
2437           ((value & 0x00ff0000) >>  8) |
2438           (value >> 24);
2439    }
2440    
2441    static pcre_uint16
2442    swap_uint16(pcre_uint16 value)
2443    {
2444    return (value >> 8) | (value << 8);
2445    }
2446    
2447    
2448    
2449    /*************************************************
2450    *        Flip bytes in a compiled pattern        *
2451    *************************************************/
2452    
2453    /* This function is called if the 'F' option was present on a pattern that is
2454    to be written to a file. We flip the bytes of all the integer fields in the
2455    regex data block and the study block. In 16-bit mode this also flips relevant
2456    bytes in the pattern itself. This is to make it possible to test PCRE's
2457    ability to reload byte-flipped patterns, e.g. those compiled on a different
2458    architecture. */
2459    
2460    #if defined SUPPORT_PCRE8 || defined SUPPORT_PCRE16
2461    static void
2462    regexflip8_or_16(pcre *ere, pcre_extra *extra)
2463    {
2464    real_pcre8_or_16 *re = (real_pcre8_or_16 *)ere;
2465    #ifdef SUPPORT_PCRE16
2466    int op;
2467    pcre_uint16 *ptr = (pcre_uint16 *)re + re->name_table_offset;
2468    int length = re->name_count * re->name_entry_size;
2469    #ifdef SUPPORT_UTF
2470    BOOL utf = (re->options & PCRE_UTF16) != 0;
2471    BOOL utf16_char = FALSE;
2472    #endif /* SUPPORT_UTF */
2473    #endif /* SUPPORT_PCRE16 */
2474    
2475    /* Always flip the bytes in the main data block and study blocks. */
2476    
2477    re->magic_number = REVERSED_MAGIC_NUMBER;
2478    re->size = swap_uint32(re->size);
2479    re->options = swap_uint32(re->options);
2480    re->flags = swap_uint16(re->flags);
2481    re->top_bracket = swap_uint16(re->top_bracket);
2482    re->top_backref = swap_uint16(re->top_backref);
2483    re->first_char = swap_uint16(re->first_char);
2484    re->req_char = swap_uint16(re->req_char);
2485    re->name_table_offset = swap_uint16(re->name_table_offset);
2486    re->name_entry_size = swap_uint16(re->name_entry_size);
2487    re->name_count = swap_uint16(re->name_count);
2488    
2489    if (extra != NULL)
2490      {
2491      pcre_study_data *rsd = (pcre_study_data *)(extra->study_data);
2492      rsd->size = swap_uint32(rsd->size);
2493      rsd->flags = swap_uint32(rsd->flags);
2494      rsd->minlength = swap_uint32(rsd->minlength);
2495      }
2496    
2497    /* In 8-bit mode, that is all we need to do. In 16-bit mode we must swap bytes
2498    in the name table, if present, and then in the pattern itself. */
2499    
2500    #ifdef SUPPORT_PCRE16
2501    if (pcre_mode != PCRE16_MODE) return;
2502    
2503    while(TRUE)
2504      {
2505      /* Swap previous characters. */
2506      while (length-- > 0)
2507        {
2508        *ptr = swap_uint16(*ptr);
2509        ptr++;
2510        }
2511    #ifdef SUPPORT_UTF
2512      if (utf16_char)
2513        {
2514        if ((ptr[-1] & 0xfc00) == 0xd800)
2515          {
2516          /* We know that there is only one extra character in UTF-16. */
2517          *ptr = swap_uint16(*ptr);
2518          ptr++;
2519          }
2520        }
2521      utf16_char = FALSE;
2522    #endif /* SUPPORT_UTF */
2523    
2524      /* Get next opcode. */
2525    
2526      length = 0;
2527      op = *ptr;
2528      *ptr++ = swap_uint16(op);
2529    
2530      switch (op)
2531        {
2532        case OP_END:
2533        return;
2534    
2535    #ifdef SUPPORT_UTF
2536        case OP_CHAR:
2537        case OP_CHARI:
2538        case OP_NOT:
2539        case OP_NOTI:
2540        case OP_STAR:
2541        case OP_MINSTAR:
2542        case OP_PLUS:
2543        case OP_MINPLUS:
2544        case OP_QUERY:
2545        case OP_MINQUERY:
2546        case OP_UPTO:
2547        case OP_MINUPTO:
2548        case OP_EXACT:
2549        case OP_POSSTAR:
2550        case OP_POSPLUS:
2551        case OP_POSQUERY:
2552        case OP_POSUPTO:
2553        case OP_STARI:
2554        case OP_MINSTARI:
2555        case OP_PLUSI:
2556        case OP_MINPLUSI:
2557        case OP_QUERYI:
2558        case OP_MINQUERYI:
2559        case OP_UPTOI:
2560        case OP_MINUPTOI:
2561        case OP_EXACTI:
2562        case OP_POSSTARI:
2563        case OP_POSPLUSI:
2564        case OP_POSQUERYI:
2565        case OP_POSUPTOI:
2566        case OP_NOTSTAR:
2567        case OP_NOTMINSTAR:
2568        case OP_NOTPLUS:
2569        case OP_NOTMINPLUS:
2570        case OP_NOTQUERY:
2571        case OP_NOTMINQUERY:
2572        case OP_NOTUPTO:
2573        case OP_NOTMINUPTO:
2574        case OP_NOTEXACT:
2575        case OP_NOTPOSSTAR:
2576        case OP_NOTPOSPLUS:
2577        case OP_NOTPOSQUERY:
2578        case OP_NOTPOSUPTO:
2579        case OP_NOTSTARI:
2580        case OP_NOTMINSTARI:
2581        case OP_NOTPLUSI:
2582        case OP_NOTMINPLUSI:
2583        case OP_NOTQUERYI:
2584        case OP_NOTMINQUERYI:
2585        case OP_NOTUPTOI:
2586        case OP_NOTMINUPTOI:
2587        case OP_NOTEXACTI:
2588        case OP_NOTPOSSTARI:
2589        case OP_NOTPOSPLUSI:
2590        case OP_NOTPOSQUERYI:
2591        case OP_NOTPOSUPTOI:
2592        if (utf) utf16_char = TRUE;
2593    #endif
2594        /* Fall through. */
2595    
2596        default:
2597        length = OP_lengths16[op] - 1;
2598        break;
2599    
2600        case OP_CLASS:
2601        case OP_NCLASS:
2602        /* Skip the character bit map. */
2603        ptr += 32/sizeof(pcre_uint16);
2604        length = 0;
2605        break;
2606    
2607        case OP_XCLASS:
2608        /* LINK_SIZE can be 1 or 2 in 16 bit mode. */
2609        if (LINK_SIZE > 1)
2610          length = (int)((((unsigned int)(ptr[0]) << 16) | (unsigned int)(ptr[1]))
2611            - (1 + LINK_SIZE + 1));
2612        else
2613          length = (int)((unsigned int)(ptr[0]) - (1 + LINK_SIZE + 1));
2614    
2615        /* Reverse the size of the XCLASS instance. */
2616        *ptr = swap_uint16(*ptr);
2617        ptr++;
2618        if (LINK_SIZE > 1)
2619          {
2620          *ptr = swap_uint16(*ptr);
2621          ptr++;
2622          }
2623    
2624        op = *ptr;
2625        *ptr = swap_uint16(op);
2626        ptr++;
2627        if ((op & XCL_MAP) != 0)
2628          {
2629          /* Skip the character bit map. */
2630          ptr += 32/sizeof(pcre_uint16);
2631          length -= 32/sizeof(pcre_uint16);
2632          }
2633        break;
2634        }
2635      }
2636    /* Control should never reach here in 16 bit mode. */
2637    #endif /* SUPPORT_PCRE16 */
2638    }
2639    #endif /* SUPPORT_PCRE[8|16] */
2640    
2641    
2642    
2643    #if defined SUPPORT_PCRE32
2644    static void
2645    regexflip_32(pcre *ere, pcre_extra *extra)
2646    {
2647    real_pcre32 *re = (real_pcre32 *)ere;
2648    int op;
2649    pcre_uint32 *ptr = (pcre_uint32 *)re + re->name_table_offset;
2650    int length = re->name_count * re->name_entry_size;
2651    
2652    /* Always flip the bytes in the main data block and study blocks. */
2653    
2654    re->magic_number = REVERSED_MAGIC_NUMBER;
2655    re->size = swap_uint32(re->size);
2656    re->options = swap_uint32(re->options);
2657    re->flags = swap_uint16(re->flags);
2658    re->top_bracket = swap_uint16(re->top_bracket);
2659    re->top_backref = swap_uint16(re->top_backref);
2660    re->first_char = swap_uint32(re->first_char);
2661    re->req_char = swap_uint32(re->req_char);
2662    re->name_table_offset = swap_uint16(re->name_table_offset);
2663    re->name_entry_size = swap_uint16(re->name_entry_size);
2664    re->name_count = swap_uint16(re->name_count);
2665    
2666    if (extra != NULL)
2667      {
2668      pcre_study_data *rsd = (pcre_study_data *)(extra->study_data);
2669      rsd->size = swap_uint32(rsd->size);
2670      rsd->flags = swap_uint32(rsd->flags);
2671      rsd->minlength = swap_uint32(rsd->minlength);
2672      }
2673    
2674    /* In 32-bit mode we must swap bytes in the name table, if present, and then in
2675    the pattern itself. */
2676    
2677    while(TRUE)
2678      {
2679      /* Swap previous characters. */
2680      while (length-- > 0)
2681        {
2682        *ptr = swap_uint32(*ptr);
2683        ptr++;
2684        }
2685    
2686      /* Get next opcode. */
2687    
2688      length = 0;
2689      op = *ptr;
2690      *ptr++ = swap_uint32(op);
2691    
2692  /* Get one piece of information from the pcre_fullinfo() function */    switch (op)
2693        {
2694        case OP_END:
2695        return;
2696    
2697  static void new_info(pcre *re, pcre_extra *study, int option, void *ptr)      default:
2698  {      length = OP_lengths32[op] - 1;
2699  int rc;      break;
2700  if ((rc = pcre_fullinfo(re, study, option, ptr)) < 0)  
2701    fprintf(outfile, "Error %d from pcre_fullinfo(%d)\n", rc, option);      case OP_CLASS:
2702        case OP_NCLASS:
2703        /* Skip the character bit map. */
2704        ptr += 32/sizeof(pcre_uint32);
2705        length = 0;
2706        break;
2707    
2708        case OP_XCLASS:
2709        /* LINK_SIZE can only be 1 in 32-bit mode. */
2710        length = (int)((unsigned int)(ptr[0]) - (1 + LINK_SIZE + 1));
2711    
2712        /* Reverse the size of the XCLASS instance. */
2713        *ptr = swap_uint32(*ptr);
2714        ptr++;
2715    
2716        op = *ptr;
2717        *ptr = swap_uint32(op);
2718        ptr++;
2719        if ((op & XCL_MAP) != 0)
2720          {
2721          /* Skip the character bit map. */
2722          ptr += 32/sizeof(pcre_uint32);
2723          length -= 32/sizeof(pcre_uint32);
2724          }
2725        break;
2726        }
2727      }
2728    /* Control should never reach here in 32 bit mode. */
2729  }  }
2730    
2731    #endif /* SUPPORT_PCRE32 */
2732    
2733    
 /*************************************************  
 *         Byte flipping function                 *  
 *************************************************/  
2734    
2735  static unsigned long int  static void
2736  byteflip(unsigned long int value, int n)  regexflip(pcre *ere, pcre_extra *extra)
2737  {  {
2738  if (n == 2) return ((value & 0x00ff) << 8) | ((value & 0xff00) >> 8);  #if defined SUPPORT_PCRE32
2739  return ((value & 0x000000ff) << 24) |    if (REAL_PCRE_FLAGS(ere) & PCRE_MODE32)
2740         ((value & 0x0000ff00) <<  8) |      regexflip_32(ere, extra);
2741         ((value & 0x00ff0000) >>  8) |  #endif
2742         ((value & 0xff000000) >> 24);  #if defined SUPPORT_PCRE8 || defined SUPPORT_PCRE16
2743      if (REAL_PCRE_FLAGS(ere) & (PCRE_MODE8 | PCRE_MODE16))
2744        regexflip8_or_16(ere, extra);
2745    #endif
2746  }  }
2747    
2748    
2749    
   
2750  /*************************************************  /*************************************************
2751  *        Check match or recursion limit          *  *        Check match or recursion limit          *
2752  *************************************************/  *************************************************/
2753    
2754  static int  static int
2755  check_match_limit(pcre *re, pcre_extra *extra, uschar *bptr, int len,  check_match_limit(pcre *re, pcre_extra *extra, pcre_uint8 *bptr, int len,
2756    int start_offset, int options, int *use_offsets, int use_size_offsets,    int start_offset, int options, int *use_offsets, int use_size_offsets,
2757    int flag, unsigned long int *limit, int errnumber, const char *msg)    int flag, unsigned long int *limit, int errnumber, const char *msg)
2758  {  {
# Line 633  for (;;) Line 2767  for (;;)
2767    {    {
2768    *limit = mid;    *limit = mid;
2769    
2770    count = pcre_exec(re, extra, (char *)bptr, len, start_offset, options,    PCRE_EXEC(count, re, extra, bptr, len, start_offset, options,
2771      use_offsets, use_size_offsets);      use_offsets, use_size_offsets);
2772    
2773    if (count == errnumber)    if (count == errnumber)
# Line 678  Returns:    < 0, = 0, or > 0, according Line 2812  Returns:    < 0, = 0, or > 0, according
2812  */  */
2813    
2814  static int  static int
2815  strncmpic(uschar *s, uschar *t, int n)  strncmpic(pcre_uint8 *s, pcre_uint8 *t, int n)
2816  {  {
2817  while (n--)  while (n--)
2818    {    {
# Line 694  return 0; Line 2828  return 0;
2828  *         Check newline indicator                *  *         Check newline indicator                *
2829  *************************************************/  *************************************************/
2830    
2831  /* This is used both at compile and run-time to check for <xxx> escapes, where  /* This is used both at compile and run-time to check for <xxx> escapes. Print
2832  xxx is LF, CR, CRLF, ANYCRLF, or ANY. Print a message and return 0 if there is  a message and return 0 if there is no match.
 no match.  
2833    
2834  Arguments:  Arguments:
2835    p           points after the leading '<'    p           points after the leading '<'
# Line 706  Returns:      appropriate PCRE_NEWLINE_x Line 2839  Returns:      appropriate PCRE_NEWLINE_x
2839  */  */
2840    
2841  static int  static int
2842  check_newline(uschar *p, FILE *f)  check_newline(pcre_uint8 *p, FILE *f)
2843  {  {
2844  if (strncmpic(p, (uschar *)"cr>", 3) == 0) return PCRE_NEWLINE_CR;  if (strncmpic(p, (pcre_uint8 *)"cr>", 3) == 0) return PCRE_NEWLINE_CR;
2845  if (strncmpic(p, (uschar *)"lf>", 3) == 0) return PCRE_NEWLINE_LF;  if (strncmpic(p, (pcre_uint8 *)"lf>", 3) == 0) return PCRE_NEWLINE_LF;
2846  if (strncmpic(p, (uschar *)"crlf>", 5) == 0) return PCRE_NEWLINE_CRLF;  if (strncmpic(p, (pcre_uint8 *)"crlf>", 5) == 0) return PCRE_NEWLINE_CRLF;
2847  if (strncmpic(p, (uschar *)"anycrlf>", 8) == 0) return PCRE_NEWLINE_ANYCRLF;  if (strncmpic(p, (pcre_uint8 *)"anycrlf>", 8) == 0) return PCRE_NEWLINE_ANYCRLF;
2848  if (strncmpic(p, (uschar *)"any>", 4) == 0) return PCRE_NEWLINE_ANY;  if (strncmpic(p, (pcre_uint8 *)"any>", 4) == 0) return PCRE_NEWLINE_ANY;
2849  if (strncmpic(p, (uschar *)"bsr_anycrlf>", 12) == 0) return PCRE_BSR_ANYCRLF;  if (strncmpic(p, (pcre_uint8 *)"bsr_anycrlf>", 12) == 0) return PCRE_BSR_ANYCRLF;
2850  if (strncmpic(p, (uschar *)"bsr_unicode>", 12) == 0) return PCRE_BSR_UNICODE;  if (strncmpic(p, (pcre_uint8 *)"bsr_unicode>", 12) == 0) return PCRE_BSR_UNICODE;
2851  fprintf(f, "Unknown newline type at: <%s\n", p);  fprintf(f, "Unknown newline type at: <%s\n", p);
2852  return 0;  return 0;
2853  }  }
# Line 728  return 0; Line 2861  return 0;
2861  static void  static void
2862  usage(void)  usage(void)
2863  {  {
2864  printf("Usage:     pcretest [options] [<input> [<output>]]\n");  printf("Usage:     pcretest [options] [<input file> [<output file>]]\n\n");
2865  printf("  -b       show compiled code (bytecode)\n");  printf("Input and output default to stdin and stdout.\n");
2866    #if defined(SUPPORT_LIBREADLINE) || defined(SUPPORT_LIBEDIT)
2867    printf("If input is a terminal, readline() is used to read from it.\n");
2868    #else
2869    printf("This version of pcretest is not linked with readline().\n");
2870    #endif
2871    printf("\nOptions:\n");
2872    #ifdef SUPPORT_PCRE16
2873    printf("  -16      use the 16-bit library\n");
2874    #endif
2875    #ifdef SUPPORT_PCRE32
2876    printf("  -32      use the 32-bit library\n");
2877    #endif
2878    printf("  -b       show compiled code\n");
2879  printf("  -C       show PCRE compile-time options and exit\n");  printf("  -C       show PCRE compile-time options and exit\n");
2880    printf("  -C arg   show a specific compile-time option\n");
2881    printf("           and exit with its value. The arg can be:\n");
2882    printf("     linksize     internal link size [2, 3, 4]\n");
2883    printf("     pcre8        8 bit library support enabled [0, 1]\n");
2884    printf("     pcre16       16 bit library support enabled [0, 1]\n");
2885    printf("     pcre32       32 bit library support enabled [0, 1]\n");
2886    printf("     utf          Unicode Transformation Format supported [0, 1]\n");
2887    printf("     ucp          Unicode Properties supported [0, 1]\n");
2888    printf("     jit          Just-in-time compiler supported [0, 1]\n");
2889    printf("     newline      Newline type [CR, LF, CRLF, ANYCRLF, ANY, ???]\n");
2890  printf("  -d       debug: show compiled code and information (-b and -i)\n");  printf("  -d       debug: show compiled code and information (-b and -i)\n");
2891  #if !defined NODFA  #if !defined NODFA
2892  printf("  -dfa     force DFA matching for all subjects\n");  printf("  -dfa     force DFA matching for all subjects\n");
2893  #endif  #endif
2894  printf("  -help    show usage information\n");  printf("  -help    show usage information\n");
2895  printf("  -i       show information about compiled patterns\n"  printf("  -i       show information about compiled patterns\n"
2896           "  -M       find MATCH_LIMIT minimum for each subject\n"
2897         "  -m       output memory used information\n"         "  -m       output memory used information\n"
2898         "  -o <n>   set size of offsets vector to <n>\n");         "  -o <n>   set size of offsets vector to <n>\n");
2899  #if !defined NOPOSIX  #if !defined NOPOSIX
# Line 744  printf("  -p       use POSIX interface\n Line 2901  printf("  -p       use POSIX interface\n
2901  #endif  #endif
2902  printf("  -q       quiet: do not output PCRE version number at start\n");  printf("  -q       quiet: do not output PCRE version number at start\n");
2903  printf("  -S <n>   set stack size to <n> megabytes\n");  printf("  -S <n>   set stack size to <n> megabytes\n");
2904  printf("  -s       output store (memory) used information\n"  printf("  -s       force each pattern to be studied at basic level\n"
2905           "  -s+      force each pattern to be studied, using JIT if available\n"
2906           "  -s++     ditto, verifying when JIT was actually used\n"
2907           "  -s+n     force each pattern to be studied, using JIT if available,\n"
2908           "             where 1 <= n <= 7 selects JIT options\n"
2909           "  -s++n    ditto, verifying when JIT was actually used\n"
2910         "  -t       time compilation and execution\n");         "  -t       time compilation and execution\n");
2911  printf("  -t <n>   time compilation and execution, repeating <n> times\n");  printf("  -t <n>   time compilation and execution, repeating <n> times\n");
2912  printf("  -tm      time execution (matching) only\n");  printf("  -tm      time execution (matching) only\n");
# Line 764  options, followed by a set of test data, Line 2926  options, followed by a set of test data,
2926  int main(int argc, char **argv)  int main(int argc, char **argv)
2927  {  {
2928  FILE *infile = stdin;  FILE *infile = stdin;
2929    const char *version;
2930  int options = 0;  int options = 0;
2931  int study_options = 0;  int study_options = 0;
2932    int default_find_match_limit = FALSE;
2933  int op = 1;  int op = 1;
2934  int timeit = 0;  int timeit = 0;
2935  int timeitm = 0;  int timeitm = 0;
2936  int showinfo = 0;  int showinfo = 0;
2937  int showstore = 0;  int showstore = 0;
2938    int force_study = -1;
2939    int force_study_options = 0;
2940  int quiet = 0;  int quiet = 0;
2941  int size_offsets = 45;  int size_offsets = 45;
2942  int size_offsets_max;  int size_offsets_max;
2943  int *offsets = NULL;  int *offsets = NULL;
 #if !defined NOPOSIX  
 int posix = 0;  
 #endif  
2944  int debug = 0;  int debug = 0;
2945  int done = 0;  int done = 0;
2946  int all_use_dfa = 0;  int all_use_dfa = 0;
2947    int verify_jit = 0;
2948  int yield = 0;  int yield = 0;
2949  int stack_size;  int stack_size;
2950    pcre_uint8 *dbuffer = NULL;
2951    size_t dbuffer_size = 1u << 14;
2952    
2953    #if !defined NOPOSIX
2954    int posix = 0;
2955    #endif
2956    #if !defined NODFA
2957    int *dfa_workspace = NULL;
2958    #endif
2959    
2960  /* These vectors store, end-to-end, a list of captured substring names. Assume  pcre_jit_stack *jit_stack = NULL;
2961  that 1024 is plenty long enough for the few names we'll be testing. */  
2962    /* These vectors store, end-to-end, a list of zero-terminated captured
2963    substring names, each list itself being terminated by an empty name. Assume
2964    that 1024 is plenty long enough for the few names we'll be testing. It is
2965    easiest to keep separate 8-, 16- and 32-bit versions, using the 32-bit version
2966    for the actual memory, to ensure alignment. */
2967    
2968    pcre_uint32 copynames[1024];
2969    pcre_uint32 getnames[1024];
2970    
2971    #ifdef SUPPORT_PCRE32
2972    pcre_uint32 *cn32ptr;
2973    pcre_uint32 *gn32ptr;
2974    #endif
2975    
2976  uschar copynames[1024];  #ifdef SUPPORT_PCRE16
2977  uschar getnames[1024];  pcre_uint16 *copynames16 = (pcre_uint16 *)copynames;
2978    pcre_uint16 *getnames16 = (pcre_uint16 *)getnames;
2979    pcre_uint16 *cn16ptr;
2980    pcre_uint16 *gn16ptr;
2981    #endif
2982    
2983  uschar *copynamesptr;  #ifdef SUPPORT_PCRE8
2984  uschar *getnamesptr;  pcre_uint8 *copynames8 = (pcre_uint8 *)copynames;
2985    pcre_uint8 *getnames8 = (pcre_uint8 *)getnames;
2986    pcre_uint8 *cn8ptr;
2987    pcre_uint8 *gn8ptr;
2988    #endif
2989    
2990  /* Get buffers from malloc() so that Electric Fence will check their misuse  /* Get buffers from malloc() so that valgrind will check their misuse when
2991  when I am debugging. They grow automatically when very long lines are read. */  debugging. They grow automatically when very long lines are read. The 16-
2992    and 32-bit buffers (buffer16, buffer32) are obtained only if needed. */
2993    
2994  buffer = (unsigned char *)malloc(buffer_size);  buffer = (pcre_uint8 *)malloc(buffer_size);
2995  dbuffer = (unsigned char *)malloc(buffer_size);  pbuffer = (pcre_uint8 *)malloc(buffer_size);
 pbuffer = (unsigned char *)malloc(buffer_size);  
2996    
2997  /* The outfile variable is static so that new_malloc can use it. */  /* The outfile variable is static so that new_malloc can use it. */
2998    
# Line 813  it set 0x8000, but then I was advised th Line 3007  it set 0x8000, but then I was advised th
3007  _setmode( _fileno( stdout ), _O_BINARY );  _setmode( _fileno( stdout ), _O_BINARY );
3008  #endif  #endif
3009    
3010    /* Get the version number: both pcre_version() and pcre16_version() give the
3011    same answer. We just need to ensure that we call one that is available. */
3012    
3013    #if defined SUPPORT_PCRE8
3014    version = pcre_version();
3015    #elif defined SUPPORT_PCRE16
3016    version = pcre16_version();
3017    #elif defined SUPPORT_PCRE32
3018    version = pcre32_version();
3019    #endif
3020    
3021  /* Scan options */  /* Scan options */
3022    
3023  while (argc > 1 && argv[op][0] == '-')  while (argc > 1 && argv[op][0] == '-')
3024    {    {
3025    unsigned char *endptr;    pcre_uint8 *endptr;
3026      char *arg = argv[op];
3027    
3028      if (strcmp(arg, "-m") == 0) showstore = 1;
3029      else if (strcmp(arg, "-s") == 0) force_study = 0;
3030    
3031    if (strcmp(argv[op], "-s") == 0 || strcmp(argv[op], "-m") == 0)    else if (strncmp(arg, "-s+", 3) == 0)
3032      showstore = 1;      {
3033    else if (strcmp(argv[op], "-q") == 0) quiet = 1;      arg += 3;
3034    else if (strcmp(argv[op], "-b") == 0) debug = 1;      if (*arg == '+') { arg++; verify_jit = TRUE; }
3035    else if (strcmp(argv[op], "-i") == 0) showinfo = 1;      force_study = 1;
3036    else if (strcmp(argv[op], "-d") == 0) showinfo = debug = 1;      if (*arg == 0)
3037          force_study_options = jit_study_bits[6];
3038        else if (*arg >= '1' && *arg <= '7')
3039          force_study_options = jit_study_bits[*arg - '1'];
3040        else goto BAD_ARG;
3041        }
3042      else if (strcmp(arg, "-8") == 0)
3043        {
3044    #ifdef SUPPORT_PCRE8
3045        pcre_mode = PCRE8_MODE;
3046    #else
3047        printf("** This version of PCRE was built without 8-bit support\n");
3048        exit(1);
3049    #endif
3050        }
3051      else if (strcmp(arg, "-16") == 0)
3052        {
3053    #ifdef SUPPORT_PCRE16
3054        pcre_mode = PCRE16_MODE;
3055    #else
3056        printf("** This version of PCRE was built without 16-bit support\n");
3057        exit(1);
3058    #endif
3059        }
3060      else if (strcmp(arg, "-32") == 0)
3061        {
3062    #ifdef SUPPORT_PCRE32
3063        pcre_mode = PCRE32_MODE;
3064    #else
3065        printf("** This version of PCRE was built without 32-bit support\n");
3066        exit(1);
3067    #endif
3068        }
3069      else if (strcmp(arg, "-q") == 0) quiet = 1;
3070      else if (strcmp(arg, "-b") == 0) debug = 1;
3071      else if (strcmp(arg, "-i") == 0) showinfo = 1;
3072      else if (strcmp(arg, "-d") == 0) showinfo = debug = 1;
3073      else if (strcmp(arg, "-M") == 0) default_find_match_limit = TRUE;
3074  #if !defined NODFA  #if !defined NODFA
3075    else if (strcmp(argv[op], "-dfa") == 0) all_use_dfa = 1;    else if (strcmp(arg, "-dfa") == 0) all_use_dfa = 1;
3076  #endif  #endif
3077    else if (strcmp(argv[op], "-o") == 0 && argc > 2 &&    else if (strcmp(arg, "-o") == 0 && argc > 2 &&
3078        ((size_offsets = get_value((unsigned char *)argv[op+1], &endptr)),        ((size_offsets = get_value((pcre_uint8 *)argv[op+1], &endptr)),
3079          *endptr == 0))          *endptr == 0))
3080      {      {
3081      op++;      op++;
3082      argc--;      argc--;
3083      }      }
3084    else if (strcmp(argv[op], "-t") == 0 || strcmp(argv[op], "-tm") == 0)    else if (strcmp(arg, "-t") == 0 || strcmp(arg, "-tm") == 0)
3085      {      {
3086      int both = argv[op][2] == 0;      int both = arg[2] == 0;
3087      int temp;      int temp;
3088      if (argc > 2 && (temp = get_value((unsigned char *)argv[op+1], &endptr),      if (argc > 2 && (temp = get_value((pcre_uint8 *)argv[op+1], &endptr),
3089                       *endptr == 0))                       *endptr == 0))
3090        {        {
3091        timeitm = temp;        timeitm = temp;
# Line 849  while (argc > 1 && argv[op][0] == '-') Line 3095  while (argc > 1 && argv[op][0] == '-')
3095      else timeitm = LOOPREPEAT;      else timeitm = LOOPREPEAT;
3096      if (both) timeit = timeitm;      if (both) timeit = timeitm;
3097      }      }
3098    else if (strcmp(argv[op], "-S") == 0 && argc > 2 &&    else if (strcmp(arg, "-S") == 0 && argc > 2 &&
3099        ((stack_size = get_value((unsigned char *)argv[op+1], &endptr)),        ((stack_size = get_value((pcre_uint8 *)argv[op+1], &endptr)),
3100          *endptr == 0))          *endptr == 0))
3101      {      {
3102  #if defined(_WIN32) || defined(WIN32)  #if defined(_WIN32) || defined(WIN32) || defined(__minix) || defined(NATIVE_ZOS)
3103      printf("PCRE: -S not supported on this OS\n");      printf("PCRE: -S not supported on this OS\n");
3104      exit(1);      exit(1);
3105  #else  #else
# Line 872  while (argc > 1 && argv[op][0] == '-') Line 3118  while (argc > 1 && argv[op][0] == '-')
3118  #endif  #endif
3119      }      }
3120  #if !defined NOPOSIX  #if !defined NOPOSIX
3121    else if (strcmp(argv[op], "-p") == 0) posix = 1;    else if (strcmp(arg, "-p") == 0) posix = 1;
3122  #endif  #endif
3123    else if (strcmp(argv[op], "-C") == 0)    else if (strcmp(arg, "-C") == 0)
3124      {      {
3125      int rc;      int rc;
3126      printf("PCRE version %s\n", pcre_version());      unsigned long int lrc;
3127    
3128        if (argc > 2)
3129          {
3130          if (strcmp(argv[op + 1], "linksize") == 0)
3131            {
3132            (void)PCRE_CONFIG(PCRE_CONFIG_LINK_SIZE, &rc);
3133            printf("%d\n", rc);
3134            yield = rc;
3135            }
3136          else if (strcmp(argv[op + 1], "pcre8") == 0)
3137            {
3138    #ifdef SUPPORT_PCRE8
3139            printf("1\n");
3140            yield = 1;
3141    #else
3142            printf("0\n");
3143            yield = 0;
3144    #endif
3145            goto EXIT;
3146            }
3147          else if (strcmp(argv[op + 1], "pcre16") == 0)
3148            {
3149    #ifdef SUPPORT_PCRE16
3150            printf("1\n");
3151            yield = 1;
3152    #else
3153            printf("0\n");
3154            yield = 0;
3155    #endif
3156            goto EXIT;
3157            }
3158          else if (strcmp(argv[op + 1], "pcre32") == 0)
3159            {
3160    #ifdef SUPPORT_PCRE32
3161            printf("1\n");
3162            yield = 1;
3163    #else
3164            printf("0\n");
3165            yield = 0;
3166    #endif
3167            goto EXIT;
3168            }
3169          if (strcmp(argv[op + 1], "utf") == 0)
3170            {
3171    #ifdef SUPPORT_PCRE8
3172            if (pcre_mode == PCRE8_MODE)
3173              (void)pcre_config(PCRE_CONFIG_UTF8, &rc);
3174    #endif
3175    #ifdef SUPPORT_PCRE16
3176            if (pcre_mode == PCRE16_MODE)
3177              (void)pcre16_config(PCRE_CONFIG_UTF16, &rc);
3178    #endif
3179    #ifdef SUPPORT_PCRE32
3180            if (pcre_mode == PCRE32_MODE)
3181              (void)pcre32_config(PCRE_CONFIG_UTF32, &rc);
3182    #endif
3183            printf("%d\n", rc);
3184            yield = rc;
3185            goto EXIT;
3186            }
3187          else if (strcmp(argv[op + 1], "ucp") == 0)
3188            {
3189            (void)PCRE_CONFIG(PCRE_CONFIG_UNICODE_PROPERTIES, &rc);
3190            printf("%d\n", rc);
3191            yield = rc;
3192            }
3193          else if (strcmp(argv[op + 1], "jit") == 0)
3194            {
3195            (void)PCRE_CONFIG(PCRE_CONFIG_JIT, &rc);
3196            printf("%d\n", rc);
3197            yield = rc;
3198            }
3199          else if (strcmp(argv[op + 1], "newline") == 0)
3200            {
3201            (void)PCRE_CONFIG(PCRE_CONFIG_NEWLINE, &rc);
3202            print_newline_config(rc, TRUE);
3203            }
3204          else if (strcmp(argv[op + 1], "ebcdic") == 0)
3205            {
3206    #ifdef EBCDIC
3207            printf("1\n");
3208            yield = 1;
3209    #else
3210            printf("0\n");
3211    #endif
3212            }
3213          else if (strcmp(argv[op + 1], "ebcdic-nl") == 0)
3214            {
3215    #ifdef EBCDIC
3216            printf("0x%02x\n", CHAR_LF);
3217    #else
3218            printf("0\n");
3219    #endif
3220            }
3221          else
3222            {
3223            printf("Unknown -C option: %s\n", argv[op + 1]);
3224            }
3225          goto EXIT;
3226          }
3227    
3228        /* No argument for -C: output all configuration information. */
3229    
3230        printf("PCRE version %s\n", version);
3231      printf("Compiled with\n");      printf("Compiled with\n");
3232    
3233    #ifdef EBCDIC
3234        printf("  EBCDIC code support: LF is 0x%02x\n", CHAR_LF);
3235    #endif
3236    
3237    /* At least one of SUPPORT_PCRE8 and SUPPORT_PCRE16 will be set. If both
3238    are set, either both UTFs are supported or both are not supported. */
3239    
3240    #ifdef SUPPORT_PCRE8
3241        printf("  8-bit support\n");
3242      (void)pcre_config(PCRE_CONFIG_UTF8, &rc);      (void)pcre_config(PCRE_CONFIG_UTF8, &rc);
3243      printf("  %sUTF-8 support\n", rc? "" : "No ");        printf ("  %sUTF-8 support\n", rc ? "" : "No ");
3244      (void)pcre_config(PCRE_CONFIG_UNICODE_PROPERTIES, &rc);  #endif
3245    #ifdef SUPPORT_PCRE16
3246        printf("  16-bit support\n");
3247        (void)pcre16_config(PCRE_CONFIG_UTF16, &rc);
3248        printf ("  %sUTF-16 support\n", rc ? "" : "No ");
3249    #endif
3250    #ifdef SUPPORT_PCRE32
3251        printf("  32-bit support\n");
3252        (void)pcre32_config(PCRE_CONFIG_UTF32, &rc);
3253        printf ("  %sUTF-32 support\n", rc ? "" : "No ");
3254    #endif
3255    
3256        (void)PCRE_CONFIG(PCRE_CONFIG_UNICODE_PROPERTIES, &rc);
3257      printf("  %sUnicode properties support\n", rc? "" : "No ");      printf("  %sUnicode properties support\n", rc? "" : "No ");
3258      (void)pcre_config(PCRE_CONFIG_NEWLINE, &rc);      (void)PCRE_CONFIG(PCRE_CONFIG_JIT, &rc);
3259      printf("  Newline sequence is %s\n", (rc == '\r')? "CR" :      if (rc)
3260        (rc == '\n')? "LF" : (rc == ('\r'<<8 | '\n'))? "CRLF" :        {
3261        (rc == -2)? "ANYCRLF" :        const char *arch;
3262        (rc == -1)? "ANY" : "???");        (void)PCRE_CONFIG(PCRE_CONFIG_JITTARGET, (void *)(&arch));
3263      (void)pcre_config(PCRE_CONFIG_BSR, &rc);        printf("  Just-in-time compiler support: %s\n", arch);
3264          }
3265        else
3266          printf("  No just-in-time compiler support\n");
3267        (void)PCRE_CONFIG(PCRE_CONFIG_NEWLINE, &rc);
3268        print_newline_config(rc, FALSE);
3269        (void)PCRE_CONFIG(PCRE_CONFIG_BSR, &rc);
3270      printf("  \\R matches %s\n", rc? "CR, LF, or CRLF only" :      printf("  \\R matches %s\n", rc? "CR, LF, or CRLF only" :
3271                                       "all Unicode newlines");                                       "all Unicode newlines");
3272      (void)pcre_config(PCRE_CONFIG_LINK_SIZE, &rc);      (void)PCRE_CONFIG(PCRE_CONFIG_LINK_SIZE, &rc);
3273      printf("  Internal link size = %d\n", rc);      printf("  Internal link size = %d\n", rc);
3274      (void)pcre_config(PCRE_CONFIG_POSIX_MALLOC_THRESHOLD, &rc);      (void)PCRE_CONFIG(PCRE_CONFIG_POSIX_MALLOC_THRESHOLD, &rc);
3275      printf("  POSIX malloc threshold = %d\n", rc);      printf("  POSIX malloc threshold = %d\n", rc);
3276      (void)pcre_config(PCRE_CONFIG_MATCH_LIMIT, &rc);      (void)PCRE_CONFIG(PCRE_CONFIG_MATCH_LIMIT, &lrc);
3277      printf("  Default match limit = %d\n", rc);      printf("  Default match limit = %ld\n", lrc);
3278      (void)pcre_config(PCRE_CONFIG_MATCH_LIMIT_RECURSION, &rc);      (void)PCRE_CONFIG(PCRE_CONFIG_MATCH_LIMIT_RECURSION, &lrc);
3279      printf("  Default recursion depth limit = %d\n", rc);      printf("  Default recursion depth limit = %ld\n", lrc);
3280      (void)pcre_config(PCRE_CONFIG_STACKRECURSE, &rc);      (void)PCRE_CONFIG(PCRE_CONFIG_STACKRECURSE, &rc);
3281      printf("  Match recursion uses %s\n", rc? "stack" : "heap");      printf("  Match recursion uses %s", rc? "stack" : "heap");
3282        if (showstore)
3283          {
3284          PCRE_EXEC(stack_size, NULL, NULL, NULL, -999, -999, 0, NULL, 0);
3285          printf(": %sframe size = %d bytes", rc? "approximate " : "", -stack_size);
3286          }
3287        printf("\n");
3288      goto EXIT;      goto EXIT;
3289      }      }
3290    else if (strcmp(argv[op], "-help") == 0 ||    else if (strcmp(arg, "-help") == 0 ||
3291             strcmp(argv[op], "--help") == 0)             strcmp(arg, "--help") == 0)
3292      {      {
3293      usage();      usage();
3294      goto EXIT;      goto EXIT;
3295      }      }
3296    else    else
3297      {      {
3298      printf("** Unknown or malformed option %s\n", argv[op]);      BAD_ARG:
3299        printf("** Unknown or malformed option %s\n", arg);
3300      usage();      usage();
3301      yield = 1;      yield = 1;
3302      goto EXIT;      goto EXIT;
# Line 958  if (argc > 2) Line 3343  if (argc > 2)
3343    
3344  /* Set alternative malloc function */  /* Set alternative malloc function */
3345    
3346    #ifdef SUPPORT_PCRE8
3347  pcre_malloc = new_malloc;  pcre_malloc = new_malloc;
3348  pcre_free = new_free;  pcre_free = new_free;
3349  pcre_stack_malloc = stack_malloc;  pcre_stack_malloc = stack_malloc;
3350  pcre_stack_free = stack_free;  pcre_stack_free = stack_free;
3351    #endif
3352    
3353    #ifdef SUPPORT_PCRE16
3354    pcre16_malloc = new_malloc;
3355    pcre16_free = new_free;
3356    pcre16_stack_malloc = stack_malloc;
3357    pcre16_stack_free = stack_free;
3358    #endif
3359    
3360    #ifdef SUPPORT_PCRE32
3361    pcre32_malloc = new_malloc;
3362    pcre32_free = new_free;
3363    pcre32_stack_malloc = stack_malloc;
3364    pcre32_stack_free = stack_free;
3365    #endif
3366    
3367  /* Heading line unless quiet, then prompt for first regex if stdin */  /* Heading line unless quiet, then prompt for first regex if stdin */
3368    
3369  if (!quiet) fprintf(outfile, "PCRE version %s\n\n", pcre_version());  if (!quiet) fprintf(outfile, "PCRE version %s\n\n", version);
3370    
3371  /* Main loop */  /* Main loop */
3372    
# Line 980  while (!done) Line 3381  while (!done)
3381  #endif  #endif
3382    
3383    const char *error;    const char *error;
3384    unsigned char *p, *pp, *ppp;    pcre_uint8 *markptr;
3385    unsigned char *to_file = NULL;    pcre_uint8 *p, *pp, *ppp;
3386    const unsigned char *tables = NULL;    pcre_uint8 *to_file = NULL;
3387      const pcre_uint8 *tables = NULL;
3388      unsigned long int get_options;
3389    unsigned long int true_size, true_study_size = 0;    unsigned long int true_size, true_study_size = 0;
3390    size_t size, regex_gotten_store;    size_t size, regex_gotten_store;
3391      int do_allcaps = 0;
3392      int do_mark = 0;
3393    int do_study = 0;    int do_study = 0;
3394      int no_force_study = 0;
3395    int do_debug = debug;    int do_debug = debug;
3396    int do_G = 0;    int do_G = 0;
3397    int do_g = 0;    int do_g = 0;
3398    int do_showinfo = showinfo;    int do_showinfo = showinfo;
3399    int do_showrest = 0;    int do_showrest = 0;
3400      int do_showcaprest = 0;
3401    int do_flip = 0;    int do_flip = 0;
3402    int erroroffset, len, delimiter, poffset;    int erroroffset, len, delimiter, poffset;
3403    
3404    use_utf8 = 0;  #if !defined NODFA
3405      int dfa_matched = 0;
3406    #endif
3407    
3408      use_utf = 0;
3409    debug_lengths = 1;    debug_lengths = 1;
3410    
3411    if (infile == stdin) printf("  re> ");    if (extend_inputline(infile, buffer, "  re> ") == NULL) break;
   if (extend_inputline(infile, buffer) == NULL) break;  
3412    if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);    if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
3413    fflush(outfile);    fflush(outfile);
3414    
# Line 1010  while (!done) Line 3420  while (!done)
3420    
3421    if (*p == '<' && strchr((char *)(p+1), '<') == NULL)    if (*p == '<' && strchr((char *)(p+1), '<') == NULL)
3422      {      {
3423      unsigned long int magic, get_options;      pcre_uint32 magic;
3424      uschar sbuf[8];      pcre_uint8 sbuf[8];
3425      FILE *f;      FILE *f;
3426    
3427      p++;      p++;
3428        if (*p == '!')
3429          {
3430          do_debug = TRUE;
3431          do_showinfo = TRUE;
3432          p++;
3433          }
3434    
3435      pp = p + (int)strlen((char *)p);      pp = p + (int)strlen((char *)p);
3436      while (isspace(pp[-1])) pp--;      while (isspace(pp[-1])) pp--;
3437      *pp = 0;      *pp = 0;
# Line 1026  while (!done) Line 3443  while (!done)
3443        continue;        continue;
3444        }        }
3445    
3446        first_gotten_store = 0;
3447      if (fread(sbuf, 1, 8, f) != 8) goto FAIL_READ;      if (fread(sbuf, 1, 8, f) != 8) goto FAIL_READ;
3448    
3449      true_size =      true_size =
# Line 1033  while (!done) Line 3451  while (!done)
3451      true_study_size =      true_study_size =
3452        (sbuf[4] << 24) | (sbuf[5] << 16) | (sbuf[6] << 8) | sbuf[7];        (sbuf[4] << 24) | (sbuf[5] << 16) | (sbuf[6] << 8) | sbuf[7];
3453    
3454      re = (real_pcre *)new_malloc(true_size);      re = (pcre *)new_malloc(true_size);
3455      regex_gotten_store = gotten_store;      if (re == NULL)
3456          {
3457          printf("** Failed to get %d bytes of memory for pcre object\n",
3458            (int)true_size);
3459          yield = 1;
3460          goto EXIT;
3461          }
3462        regex_gotten_store = first_gotten_store;
3463    
3464      if (fread(re, 1, true_size, f) != true_size) goto FAIL_READ;      if (fread(re, 1, true_size, f) != true_size) goto FAIL_READ;
3465    
3466      magic = ((real_pcre *)re)->magic_number;      magic = REAL_PCRE_MAGIC(re);
3467      if (magic != MAGIC_NUMBER)      if (magic != MAGIC_NUMBER)
3468        {        {
3469        if (byteflip(magic, sizeof(magic)) == MAGIC_NUMBER)        if (swap_uint32(magic) == MAGIC_NUMBER)
3470          {          {
3471          do_flip = 1;          do_flip = 1;
3472          }          }
3473        else        else
3474          {          {
3475          fprintf(outfile, "Data in %s is not a compiled PCRE regex\n", p);          fprintf(outfile, "Data in %s is not a compiled PCRE regex\n", p);
3476            new_free(re);
3477          fclose(f);          fclose(f);
3478          continue;          continue;
3479          }          }
3480        }        }
3481    
3482      fprintf(outfile, "Compiled regex%s loaded from %s\n",      /* We hide the byte-invert info for little and big endian tests. */
3483        do_flip? " (byte-inverted)" : "", p);      fprintf(outfile, "Compiled pattern%s loaded from %s\n",
3484          do_flip && (p[-1] == '<') ? " (byte-inverted)" : "", p);
3485    
3486      /* Need to know if UTF-8 for printing data strings */      /* Now see if there is any following study data. */
   
     new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options);  
     use_utf8 = (get_options & PCRE_UTF8) != 0;  
   
     /* Now see if there is any following study data */  
3487    
3488      if (true_study_size != 0)      if (true_study_size != 0)
3489        {        {
# Line 1077  while (!done) Line 3499  while (!done)
3499          {          {
3500          FAIL_READ:          FAIL_READ:
3501          fprintf(outfile, "Failed to read data from %s\n", p);          fprintf(outfile, "Failed to read data from %s\n", p);
3502          if (extra != NULL) new_free(extra);          if (extra != NULL)
3503          if (re != NULL) new_free(re);            {
3504              PCRE_FREE_STUDY(extra);
3505              }
3506            new_free(re);
3507          fclose(f);          fclose(f);
3508          continue;          continue;
3509          }          }
# Line 1087  while (!done) Line 3512  while (!done)
3512        }        }
3513      else fprintf(outfile, "No study data\n");      else fprintf(outfile, "No study data\n");
3514    
3515        /* Flip the necessary bytes. */
3516        if (do_flip)
3517          {
3518          int rc;
3519          PCRE_PATTERN_TO_HOST_BYTE_ORDER(rc, re, extra, NULL);
3520          if (rc == PCRE_ERROR_BADMODE)
3521            {
3522            pcre_uint16 flags_in_host_byte_order;
3523            if (REAL_PCRE_MAGIC(re) == MAGIC_NUMBER)
3524              flags_in_host_byte_order = REAL_PCRE_FLAGS(re);
3525            else
3526              flags_in_host_byte_order = swap_uint16(REAL_PCRE_FLAGS(re));
3527            /* Simulate the result of the function call below. */
3528            fprintf(outfile, "Error %d from pcre%s_fullinfo(%d)\n", rc,
3529              pcre_mode == PCRE32_MODE ? "32" : pcre_mode == PCRE16_MODE ? "16" : "",
3530              PCRE_INFO_OPTIONS);
3531            fprintf(outfile, "Running in %d-bit mode but pattern was compiled in "
3532              "%d-bit mode\n", 8 * CHAR_SIZE, 8 * (flags_in_host_byte_order & PCRE_MODE_MASK));
3533            new_free(re);
3534            fclose(f);
3535            continue;
3536            }
3537          }
3538    
3539        /* Need to know if UTF-8 for printing data strings. */
3540    
3541        if (new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options) < 0)
3542          {
3543          new_free(re);
3544          fclose(f);
3545          continue;
3546          }
3547        use_utf = (get_options & PCRE_UTF8) != 0;
3548    
3549      fclose(f);      fclose(f);
3550      goto SHOW_INFO;      goto SHOW_INFO;
3551      }      }
3552    
3553    /* In-line pattern (the usual case). Get the delimiter and seek the end of    /* In-line pattern (the usual case). Get the delimiter and seek the end of
3554    the pattern; if is isn't complete, read more. */    the pattern; if it isn't complete, read more. */
3555    
3556    delimiter = *p++;    delimiter = *p++;
3557    
3558    if (isalnum(delimiter) || delimiter == '\\')    if (isalnum(delimiter) || delimiter == '\\')
3559      {      {
3560      fprintf(outfile, "** Delimiter must not be alphameric or \\\n");      fprintf(outfile, "** Delimiter must not be alphanumeric or \\\n");
3561      goto SKIP_DATA;      goto SKIP_DATA;
3562      }      }
3563    
3564    pp = p;    pp = p;
3565    poffset = p - buffer;    poffset = (int)(p - buffer);
3566    
3567    for(;;)    for(;;)
3568      {      {
# Line 1114  while (!done) Line 3573  while (!done)
3573        pp++;        pp++;
3574        }        }
3575      if (*pp != 0) break;      if (*pp != 0) break;
3576      if (infile == stdin) printf("    > ");      if ((pp = extend_inputline(infile, pp, "    > ")) == NULL)
     if ((pp = extend_inputline(infile, pp)) == NULL)  
3577        {        {
3578        fprintf(outfile, "** Unexpected EOF\n");        fprintf(outfile, "** Unexpected EOF\n");
3579        done = 1;        done = 1;
# Line 1144  while (!done) Line 3602  while (!done)
3602    /* Look for options after final delimiter */    /* Look for options after final delimiter */
3603    
3604    options = 0;    options = 0;
3605    study_options = 0;    study_options = force_study_options;
3606    log_store = showstore;  /* default from command line */    log_store = showstore;  /* default from command line */
3607    
3608    while (*pp != 0)    while (*pp != 0)
# Line 1158  while (!done) Line 3616  while (!done)
3616        case 's': options |= PCRE_DOTALL; break;        case 's': options |= PCRE_DOTALL; break;
3617        case 'x': options |= PCRE_EXTENDED; break;        case 'x': options |= PCRE_EXTENDED; break;
3618    
3619        case '+': do_showrest = 1; break;        case '+':
3620          if (do_showrest) do_showcaprest = 1; else do_showrest = 1;
3621          break;
3622    
3623          case '=': do_allcaps = 1; break;
3624        case 'A': options |= PCRE_ANCHORED; break;        case 'A': options |= PCRE_ANCHORED; break;
3625        case 'B': do_debug = 1; break;        case 'B': do_debug = 1; break;
3626        case 'C': options |= PCRE_AUTO_CALLOUT; break;        case 'C': options |= PCRE_AUTO_CALLOUT; break;
# Line 1168  while (!done) Line 3630  while (!done)
3630        case 'G': do_G = 1; break;        case 'G': do_G = 1; break;
3631        case 'I': do_showinfo = 1; break;        case 'I': do_showinfo = 1; break;
3632        case 'J': options |= PCRE_DUPNAMES; break;        case 'J': options |= PCRE_DUPNAMES; break;
3633          case 'K': do_mark = 1; break;
3634        case 'M': log_store = 1; break;        case 'M': log_store = 1; break;
3635        case 'N': options |= PCRE_NO_AUTO_CAPTURE; break;        case 'N': options |= PCRE_NO_AUTO_CAPTURE; break;
3636    
# Line 1175  while (!done) Line 3638  while (!done)
3638        case 'P': do_posix = 1; break;        case 'P': do_posix = 1; break;
3639  #endif  #endif
3640    
3641        case 'S': do_study = 1; break;        case 'S':
3642          do_study = 1;
3643          for (;;)
3644            {
3645            switch (*pp++)
3646              {
3647              case 'S':
3648              do_study = 0;
3649              no_force_study = 1;
3650              break;
3651    
3652              case '!':
3653              study_options |= PCRE_STUDY_EXTRA_NEEDED;
3654              break;
3655    
3656              case '+':
3657              if (*pp == '+')
3658                {
3659                verify_jit = TRUE;
3660                pp++;
3661                }
3662              if (*pp >= '1' && *pp <= '7')
3663                study_options |= jit_study_bits[*pp++ - '1'];
3664              else
3665                study_options |= jit_study_bits[6];
3666              break;
3667    
3668              case '-':
3669              study_options &= ~PCRE_STUDY_ALLJIT;
3670              break;
3671    
3672              default:
3673              pp--;
3674              goto ENDLOOP;
3675              }
3676            }
3677          ENDLOOP:
3678          break;
3679    
3680        case 'U': options |= PCRE_UNGREEDY; break;        case 'U': options |= PCRE_UNGREEDY; break;
3681          case 'W': options |= PCRE_UCP; break;
3682        case 'X': options |= PCRE_EXTRA; break;        case 'X': options |= PCRE_EXTRA; break;
3683          case 'Y': options |= PCRE_NO_START_OPTIMISE; break;
3684        case 'Z': debug_lengths = 0; break;        case 'Z': debug_lengths = 0; break;
3685        case '8': options |= PCRE_UTF8; use_utf8 = 1; break;        case '8': options |= PCRE_UTF8; use_utf = 1; break;
3686        case '?': options |= PCRE_NO_UTF8_CHECK; break;        case '?': options |= PCRE_NO_UTF8_CHECK; break;
3687    
3688          case 'T':
3689          switch (*pp++)
3690            {
3691            case '0': tables = tables0; break;
3692            case '1': tables = tables1; break;
3693    
3694            case '\r':
3695            case '\n':
3696            case ' ':
3697            case 0:
3698            fprintf(outfile, "** Missing table number after /T\n");
3699            goto SKIP_DATA;
3700    
3701            default:
3702            fprintf(outfile, "** Bad table number \"%c\" after /T\n", pp[-1]);
3703            goto SKIP_DATA;
3704            }
3705          break;
3706    
3707        case 'L':        case 'L':
3708        ppp = pp;        ppp = pp;
3709        /* The '\r' test here is so that it works on Windows. */        /* The '\r' test here is so that it works on Windows. */
# Line 1194  while (!done) Line 3716  while (!done)
3716          goto SKIP_DATA;          goto SKIP_DATA;
3717          }          }
3718        locale_set = 1;        locale_set = 1;
3719        tables = pcre_maketables();        tables = PCRE_MAKETABLES;
3720        pp = ppp;        pp = ppp;
3721        break;        break;
3722    
# Line 1207  while (!done) Line 3729  while (!done)
3729    
3730        case '<':        case '<':
3731          {          {
3732          int x = check_newline(pp, outfile);          if (strncmpic(pp, (pcre_uint8 *)"JS>", 3) == 0)
3733          if (x == 0) goto SKIP_DATA;            {
3734          options |= x;            options |= PCRE_JAVASCRIPT_COMPAT;
3735          while (*pp++ != '>');            pp += 3;
3736              }
3737            else
3738              {
3739              int x = check_newline(pp, outfile);
3740              if (x == 0) goto SKIP_DATA;
3741              options |= x;
3742              while (*pp++ != '>');
3743              }
3744          }          }
3745        break;        break;
3746    
# Line 1227  while (!done) Line 3757  while (!done)
3757    
3758    /* Handle compiling via the POSIX interface, which doesn't support the    /* Handle compiling via the POSIX interface, which doesn't support the
3759    timing, showing, or debugging options, nor the ability to pass over    timing, showing, or debugging options, nor the ability to pass over