/[pcre]/code/trunk/sljit/sljitNativeSPARC_32.c
ViewVC logotype

Contents of /code/trunk/sljit/sljitNativeSPARC_32.c

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1195 - (show annotations)
Thu Nov 1 15:21:27 2012 UTC (6 years, 9 months ago) by zherczeg
File MIME type: text/plain
File size: 7609 byte(s)
Another huge JIT compiler update.
1 /*
2 * Stack-less Just-In-Time compiler
3 *
4 * Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without modification, are
7 * permitted provided that the following conditions are met:
8 *
9 * 1. Redistributions of source code must retain the above copyright notice, this list of
10 * conditions and the following disclaimer.
11 *
12 * 2. Redistributions in binary form must reproduce the above copyright notice, this list
13 * of conditions and the following disclaimer in the documentation and/or other materials
14 * provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
17 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
19 * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
21 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
22 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
23 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
24 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 */
26
27 static sljit_si load_immediate(struct sljit_compiler *compiler, sljit_si dst, sljit_sw imm)
28 {
29 if (imm <= SIMM_MAX && imm >= SIMM_MIN)
30 return push_inst(compiler, OR | D(dst) | S1(0) | IMM(imm), DR(dst));
31
32 FAIL_IF(push_inst(compiler, SETHI | D(dst) | ((imm >> 10) & 0x3fffff), DR(dst)));
33 return (imm & 0x3ff) ? push_inst(compiler, OR | D(dst) | S1(dst) | IMM_ARG | (imm & 0x3ff), DR(dst)) : SLJIT_SUCCESS;
34 }
35
36 #define ARG2(flags, src2) ((flags & SRC2_IMM) ? IMM(src2) : S2(src2))
37
38 static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, sljit_si op, sljit_si flags,
39 sljit_si dst, sljit_si src1, sljit_sw src2)
40 {
41 SLJIT_COMPILE_ASSERT(ICC_IS_SET == SET_FLAGS, icc_is_set_and_set_flags_must_be_the_same);
42
43 switch (op) {
44 case SLJIT_MOV:
45 case SLJIT_MOV_UI:
46 case SLJIT_MOV_SI:
47 case SLJIT_MOV_P:
48 SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
49 if (dst != src2)
50 return push_inst(compiler, OR | D(dst) | S1(0) | S2(src2), DR(dst));
51 return SLJIT_SUCCESS;
52
53 case SLJIT_MOV_UB:
54 case SLJIT_MOV_SB:
55 SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
56 if ((flags & (REG_DEST | REG2_SOURCE)) == (REG_DEST | REG2_SOURCE)) {
57 if (op == SLJIT_MOV_UB)
58 return push_inst(compiler, AND | D(dst) | S1(src2) | IMM(0xff), DR(dst));
59 FAIL_IF(push_inst(compiler, SLL | D(dst) | S1(src2) | IMM(24), DR(dst)));
60 return push_inst(compiler, SRA | D(dst) | S1(dst) | IMM(24), DR(dst));
61 }
62 else if (dst != src2)
63 SLJIT_ASSERT_STOP();
64 return SLJIT_SUCCESS;
65
66 case SLJIT_MOV_UH:
67 case SLJIT_MOV_SH:
68 SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
69 if ((flags & (REG_DEST | REG2_SOURCE)) == (REG_DEST | REG2_SOURCE)) {
70 FAIL_IF(push_inst(compiler, SLL | D(dst) | S1(src2) | IMM(16), DR(dst)));
71 return push_inst(compiler, (op == SLJIT_MOV_SH ? SRA : SRL) | D(dst) | S1(dst) | IMM(16), DR(dst));
72 }
73 else if (dst != src2)
74 SLJIT_ASSERT_STOP();
75 return SLJIT_SUCCESS;
76
77 case SLJIT_NOT:
78 SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
79 return push_inst(compiler, XNOR | (flags & SET_FLAGS) | D(dst) | S1(0) | S2(src2), DR(dst) | (flags & SET_FLAGS));
80
81 case SLJIT_CLZ:
82 SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
83 /* sparc 32 does not support SLJIT_KEEP_FLAGS. Not sure I can fix this. */
84 FAIL_IF(push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(src2) | S2(0), SET_FLAGS));
85 FAIL_IF(push_inst(compiler, OR | D(TMP_REG1) | S1(0) | S2(src2), DR(TMP_REG1)));
86 FAIL_IF(push_inst(compiler, BICC | DA(0x1) | (7 & DISP_MASK), UNMOVABLE_INS));
87 FAIL_IF(push_inst(compiler, OR | (flags & SET_FLAGS) | D(dst) | S1(0) | IMM(32), UNMOVABLE_INS | (flags & SET_FLAGS)));
88 FAIL_IF(push_inst(compiler, OR | D(dst) | S1(0) | IMM(-1), DR(dst)));
89
90 /* Loop. */
91 FAIL_IF(push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(TMP_REG1) | S2(0), SET_FLAGS));
92 FAIL_IF(push_inst(compiler, SLL | D(TMP_REG1) | S1(TMP_REG1) | IMM(1), DR(TMP_REG1)));
93 FAIL_IF(push_inst(compiler, BICC | DA(0xe) | (-2 & DISP_MASK), UNMOVABLE_INS));
94 return push_inst(compiler, ADD | (flags & SET_FLAGS) | D(dst) | S1(dst) | IMM(1), UNMOVABLE_INS | (flags & SET_FLAGS));
95
96 case SLJIT_ADD:
97 return push_inst(compiler, ADD | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
98
99 case SLJIT_ADDC:
100 return push_inst(compiler, ADDC | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
101
102 case SLJIT_SUB:
103 return push_inst(compiler, SUB | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
104
105 case SLJIT_SUBC:
106 return push_inst(compiler, SUBC | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
107
108 case SLJIT_MUL:
109 FAIL_IF(push_inst(compiler, SMUL | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst)));
110 if (!(flags & SET_FLAGS))
111 return SLJIT_SUCCESS;
112 FAIL_IF(push_inst(compiler, SRA | D(TMP_REG1) | S1(dst) | IMM(31), DR(TMP_REG1)));
113 FAIL_IF(push_inst(compiler, RDY | D(TMP_REG4), DR(TMP_REG4)));
114 return push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(TMP_REG1) | S2(TMP_REG4), MOVABLE_INS | SET_FLAGS);
115
116 case SLJIT_AND:
117 return push_inst(compiler, AND | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
118
119 case SLJIT_OR:
120 return push_inst(compiler, OR | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
121
122 case SLJIT_XOR:
123 return push_inst(compiler, XOR | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
124
125 case SLJIT_SHL:
126 FAIL_IF(push_inst(compiler, SLL | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst)));
127 return !(flags & SET_FLAGS) ? SLJIT_SUCCESS : push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(dst) | S2(0), SET_FLAGS);
128
129 case SLJIT_LSHR:
130 FAIL_IF(push_inst(compiler, SRL | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst)));
131 return !(flags & SET_FLAGS) ? SLJIT_SUCCESS : push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(dst) | S2(0), SET_FLAGS);
132
133 case SLJIT_ASHR:
134 FAIL_IF(push_inst(compiler, SRA | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst)));
135 return !(flags & SET_FLAGS) ? SLJIT_SUCCESS : push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(dst) | S2(0), SET_FLAGS);
136 }
137
138 SLJIT_ASSERT_STOP();
139 return SLJIT_SUCCESS;
140 }
141
142 static SLJIT_INLINE sljit_si emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw init_value)
143 {
144 FAIL_IF(push_inst(compiler, SETHI | D(dst) | ((init_value >> 10) & 0x3fffff), DR(dst)));
145 return push_inst(compiler, OR | D(dst) | S1(dst) | IMM_ARG | (init_value & 0x3ff), DR(dst));
146 }
147
148 SLJIT_API_FUNC_ATTRIBUTE void sljit_set_jump_addr(sljit_uw addr, sljit_uw new_addr)
149 {
150 sljit_ins *inst = (sljit_ins*)addr;
151
152 inst[0] = (inst[0] & 0xffc00000) | ((new_addr >> 10) & 0x3fffff);
153 inst[1] = (inst[1] & 0xfffffc00) | (new_addr & 0x3ff);
154 SLJIT_CACHE_FLUSH(inst, inst + 2);
155 }
156
157 SLJIT_API_FUNC_ATTRIBUTE void sljit_set_const(sljit_uw addr, sljit_sw new_constant)
158 {
159 sljit_ins *inst = (sljit_ins*)addr;
160
161 inst[0] = (inst[0] & 0xffc00000) | ((new_constant >> 10) & 0x3fffff);
162 inst[1] = (inst[1] & 0xfffffc00) | (new_constant & 0x3ff);
163 SLJIT_CACHE_FLUSH(inst, inst + 2);
164 }

  ViewVC Help
Powered by ViewVC 1.1.5